asterisk

Commit Graph

Author	SHA1	Message	Date
Kinsey Moore	7cbb6eab15	PJSIP: Add Path header support This adds Path support to chan_pjsip in res_pjsip_path.c with minimal additions in res_pjsip_registrar.c to store the path and additions in res_pjsip_outbound_registration.c to enable advertisement of path support to registrars and intervening proxies. Path information is stored on contacts and is enabled via Address of Record (AoRs) and Registration configuration sections. While adding path support, it became necessary to be able to add SIP supplements that handled messages outside of sessions, so a framework for handling these types of hooks was added in parallel to the already-existing session supplements and several senders of out-of-dialog requests were refactored as a result. (closes issue ASTERISK-21084) Review: https://reviewboard.asterisk.org/r/3050/ ........ Merged revisions 405565 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405566 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Jonathan Rose	aa9db707c5	ARI: Add mailboxes resource for controlling and polling external MWI Adds the following AMI commands: PUT mailboxes/mailboxName modifies mailbox state and implicitly creates new mailboxes GET mailboxes/mailboxName retrieves a JSON representation of a single mailbox if it exists GET mailboxes retrieves a JSON array of all mailboxes DELETE mailbox/mailboxName deletes a mailbox Note that res_mwi_external must be loaded for these functions to actually do anything. Review: https://reviewboard.asterisk.org/r/3117/ ........ Merged revisions 405553 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405554 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Richard Mudgett	828f339a9c	verbosity: Fix performance of console verbose messages. The per console verbose level feature as previously implemented caused a large performance penalty. The fix required some minor incompatibilities if the new rasterisk is used to connect to an earlier version. If the new rasterisk connects to an older Asterisk version then the root console verbose level is always affected by the "core set verbose" command of the remote console even though it may appear to only affect the current console. If an older version of rasterisk connects to the new version then the "core set verbose" command will have no effect. * Fixed the verbose performance by not generating a verbose message if nothing is going to use it and then filtered any generated verbose messages before actually sending them to the remote consoles. * Split the "core set debug" and "core set verbose" CLI commands to remove the per module verbose support that cannot work with the per console verbose level. * Added a silent option to the "core set verbose" command. * Fixed "core set debug off" tab completion. * Made "core show settings" list the current console verbosity in addition to the root console verbosity. * Changed the default verbose level of the 'verbose' setting in the logger.conf [logfiles] section. The default is now to once again follow the current root console level. As a result, using the AMI Command action with "core set verbose" could again set the root console verbose level and affect the verbose level logged. (closes issue AST-1252) Reported by: Guenther Kelleter Review: https://reviewboard.asterisk.org/r/3114/ ........ Merged revisions 405431 from http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged revisions 405432 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405436 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Joshua Colp	8585340b87	res_ari: Fix various memory leaks. This change fixes a few memory leaks that were found based on a mailing list post. 1. Some JSON response messages were never freed. This was caused by the documentation stating that message references were stolen when in reality they were not. The code now follows the documentation and usage has been updated. 2. HTTP response headers were never freed. 3. The variable list for wildcards paths was never freed. (closes issue ASTERISK-23128) Reported by: Kenneth Watson (on list) Review: https://reviewboard.asterisk.org/r/3119/ ........ Merged revisions 405325 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405326 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Matthew Jordan	373965dbff	CDRs: Synchronize dialplan applications that manipulate CDRs with the engine In https://reviewboard.asterisk.org/r/3057/, applications and functions that manipulate CDRs were made to interact over Stasis. This was done to synchronize manipulations of CDRs from the dialplan with the updates the engine itself receives over the message bus. This change rested on a faulty premise: that messages published to the CDR topic or to a topic that forwards to the CDR topic are synchronized with the messages handled by the CDR topic subscription in the CDR engine. This is not the case. There is no ordering guaranteed for two messages published to the same topic; ordering is only guaranteed if a message is published to the same subscriber. Stasis was modified in r405311 to allow a publisher to synchronize on the subscriber. This patch uses that API to synchronize the CDR publishers with the CDR engine message router, which maintains the overall topic subscription. (closes issue ASTERISK-22884) Reported by: Matt Jordan Review: https://reviewboard.asterisk.org/r/3099/ ........ Merged revisions 405312 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405314 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Matthew Jordan	f8aaf585a3	stasis: Add methods to allow for synchronous publishing to subscriber This patch adds an API call to Stasis that allows a publisher to publish a stasis message that will not return until a specific subscriber handles the message. Since a subscriber can have their own forwarding topic which orders messages from many topics, this allows a publisher who knows of that subscriber to synchronize to that subscriber regardless of the forwarding relationships between topics. This is of particular use for dialplan applications that need to synchronize on a particular subscriber's handling of a message. (issue ASTERISK-22884) Reported by: Matt Jordan Review: https://reviewboard.asterisk.org/r/3099/ ........ Merged revisions 405311 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405313 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Kinsey Moore	51901aa2ed	astobj2: Correct ao2_iterator opacity violations This corrects the ao2_iterator opacity violations in res_pjsip_session.c by adding a global function to get the number of elements inside the container hidden behind the iterator. (closes issue ASTERISK-23053) Review: https://reviewboard.asterisk.org/r/3111/ Reported by: Richard Mudgett ........ Merged revisions 405253 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405254 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Richard Mudgett	9fa171e547	External MWI core support. * The core external MWI resource provides for MWI message counts persistence using sorcery. With sorcery, the user is able to configure which sorcery wizzard backend to use if the default astdb is not desired. * The core external MWI resoruce provides some debugging CLI commands enabled by defining MWI_DEBUG_CLI. The debugging CLI commands are: "mwi delete all", "mwi delete like <regex>", "mwi delete mailbox <mailbox>", "mwi list all", "mwi list like <regex>", "mwi show mailbox <mailbox>", and "mwi update mailbox <mailbox> [<new> [<old>]]". (closes issue AFS-43) Review: https://reviewboard.asterisk.org/r/3061/ ........ Merged revisions 404952 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404953 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Kevin Harwell	821ab51381	res_pjsip: add 'set_var' support on endpoints Added a new 'set_var' option for ast_sip_endpoint(s). For each variable specified that variable gets set upon creation of a pjsip channel involving the endpoint. (closes issue ASTERISK-22868) Reported by: Joshua Colp Review: https://reviewboard.asterisk.org/r/3095/ ........ Merged revisions 404663 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404664 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Matthew Jordan	b172d369c4	res_pjsip: Add PJSIP CLI commands Implements the following cli commands: pjsip list aors pjsip list auths pjsip list channels pjsip list contacts pjsip list endpoints pjsip show aor(s) pjsip show auth(s) pjsip show channels pjsip show endpoint(s) Also... Minor modifications made to the AMI command implementations to facilitate reuse. New function ast_variable_list_sort added to config.c and config.h to implement variable list sorting. (issue ASTERISK-22610) patches: pjsip_cli_v2.patch uploaded by george.joseph (License 6322) ........ Merged revisions 404480 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404507 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Matthew Jordan	c2fd2ac823	manager: bump version to 2.0.0 AMI has received substantial updates over the past year. Not only has the syntax been vastly improved and made consistent (which entails many event changes), but the underlying things that those events convey have changed substantially as well. After some conversation in #asterisk-dev, it was agreed that this is a good time to jump to 2. At the same time, since ARI will most likely use semantic versioning, we might as well use that for AMI as well. That also affords us greater meaning for the AMI version. ........ Merged revisions 404421 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404433 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Mark Michelson	1b91ee6c4b	Fix a deadlock that occurred due to a conflict of masquerades. For the explanation, here is a copy-paste of the review board explanation: Initially, it was discovered that performing an attended transfer of a multiparty bridge with a PJSIP channel would cause a deadlock. A PBX thread started a masquerade and reached the point where it was calling the fixup() callback on the "original" channel. For chan_pjsip, this involves pushing a synchronous task to the session's serializer. The problem was that a task ahead of the fixup task was also attempting to perform a channel masquerade. However, since masquerades are designed in a way to only allow for one to occur at a time, the task ahead of the fixup could not continue until the masquerade already in progress had completed. And of course, the masquerade in progress could not complete until the task ahead of the fixup task had completed. Deadlock. The initial fix was to change the fixup task to be asynchronous. While this prevented the deadlock from occurring, it had the frightful side effect of potentially allowing for tasks in the session's serializer to operate on a zombie channel. Taking a step back from this particular deadlock, it became clear that the problem was not really this one particular issue but that masquerades themselves needed to be addressed. A PJSIP attended transfer operation calls ast_channel_move(), which attempts to both set up and execute a masquerade. The problem was that after it had set up the masquerade, the PBX thread had swooped in and tried to actually perform the masquerade. Looking at changes that had been made to Asterisk 12, it became clear that there never is any time now that anyone ever wants to set up a masquerade and allow for the channel thread to actually perform the masquerade. Everyone always is calling ast_channel_move(), performs the masquerade itself before returning. In this patch, I have removed all blocks of code from channel.c that will attempt to perform a masquerade if ast_channel_masq() returns true. Now, there is no distinction between setting up a masquerade and performing the masquerade. It is one operation. The only remaining checks for ast_channel_masq() and ast_channel_masqr() are in ast_hangup() since we do not want to interrupt a masquerade by hanging up the channel. Instead, now ast_hangup() will wait for a masquerade to complete before moving forward with its operation. The ast_channel_move() function has been modified to basically in-line the logic that used to be in ast_channel_masquerade(). ast_channel_masquerade() has been killed off for real. ast_channel_move() now has a lock associated with it that is used to prevent any simultaneous moves from occurring at once. This means there is no need to make sure that ast_channel_masq() or ast_channel_masqr() are already set on a channel when ast_channel_move() is called. It also means the channel container lock is not pulling double duty by both keeping the container locked and preventing multiple masquerades from occurring simultaneously. The ast_do_masquerade() function has been renamed to do_channel_masquerade() and is now internal to channel.c. The function now takes explicit arguments of which channels are involved in the masquerade instead of a single channel. While it probably is possible to do some further refactoring of this method, I feel that I would be treading dangerously. Instead, all I did was change some comments that no longer are true after this changeset. The other more minor change introduced in this patch is to res_pjsip.c to make ast_sip_push_task_synchronous() run the task in-place if we are already a SIP servant thread. This is related to this patch because even when we isolate the channel masquerade to only running in the SIP servant thread, we would still deadlock when the fixup() callback is reached since we would essentially be waiting forever for ourselves to finish before actually running the fixup. This makes it so the fixup is run without having to push a task into a serializer at all. (closes issue ASTERISK-22936) Reported by Jonathan Rose Review: https://reviewboard.asterisk.org/r/3069 ........ Merged revisions 404356 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404368 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Richard Mudgett	3ccd5dee18	udptl: Dead code elimination. ast_udptl_bridge was not used. Removing dead code starting with ast_udptl_bridge() eliminated the code in this change. Note: This code has actually been dead since Asterisk v1.4 when it was first put in. Review: https://reviewboard.asterisk.org/r/3079/ ........ Merged revisions 404354 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404355 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Richard Mudgett	e4803bbd9e	Voicemail: Remove mailbox identifier format (box@context) assumptions in the system. This change is in preparation for external MWI support. Removed code from the system for normal mailbox handling that appends @default to the mailbox identifier if it does not have a context. The only exception is the legacy hasvoicemail users.conf option. The legacy option will only work for app_voicemail mailboxes. The system cannot make any assumptions about the format of the mailbox identifer used by app_voicemail. chan_sip and chan_dahdi/sig_pri had the most changes because they both tried to interpret the mailbox identifier. chan_sip just stored and compared the two components. chan_dahdi actually used the box information. The ISDN MWI support configuration options had to be reworked because chan_dahdi was parsing the box@context format to get the box number. As a result the mwi_vm_boxes chan_dahdi.conf option was added and is documented in the chan_dahdi.conf.sample file. Review: https://reviewboard.asterisk.org/r/3072/ ........ Merged revisions 404348 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404350 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Matthew Jordan	7e9febbf86	app_cdr,app_forkcdr,func_cdr: Synchronize with engine when manipulating state When doing the rework of the CDR engine that pushed all of the logic into cdr.c and made it respond to changes in channel state over Stasis, we knew that accessing the CDR engine from the dialplan would be "slightly" non-deterministic. Dialplan threads would be accessing CDRs while Stasis threads would be updating the state of said CDRs - whereas in the past, everything happened on the dialplan threads. Tests have shown that "slightly" is in reality "very". This patch synchronizes things by making the dialplan applications/functions that manipulate CDRs do so over Stasis. ForkCDR, NoCDR, ResetCDR, CDR, and CDR_PROP now all use Stasis to send their requests over to the CDR engine, and synchronize on the channel Stasis topic via a subscription so that they return their values/control to the dialplan at the appropriate time. While going through this, the following changes were also made: * DISA, which can reset the CDR when a user successfully authenticates, now just uses the ResetCDR app to do this. This prevents having to duplicate the same Stasis synchronization logic in that application. * Answer no longer disables CDRs. It actually didn't work anyway - calling DISABLE on the channel's CDR doesn't stop the CDR from getting the Answer time - it just kills all CDRs on that channel, which isn't what the caller would intend. (closes issue ASTERISK-22884) (closes issue ASTERISK-22886) Review: https://reviewboard.asterisk.org/r/3057/ ........ Merged revisions 404294 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404295 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Kevin Harwell	28c0cb28d0	channel locking: Add locking for channel snapshot creation Original commit message by mmichelson (asterisk 12 r403311): "This adds channel locks around calls to create channel snapshots as well as other functions which operate on a channel and then end up creating a channel snapshot. Functions that expect the channel to be locked prior to being called have had their documentation updated to indicate such." The above was initially committed and then reverted at r403398. The problem was found to be in core_local.c in the publish_local_bridge_message function. The ast_unreal_lock_all function locks and adds a reference to the returned channels and while they were being unlocked they were not being unreffed when no longer needed. Fixed by unreffing the channels. Also in bridge.c a lock was obtained on "other->chan", but then an attempt was made to unlock "other" and not the previously locked channel. Fixed by unlocking "other->chan" (closes issue ASTERISK-22709) Reported by: John Bigelow ........ Merged revisions 404237 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404260 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Joshua Colp	e2630fcd51	channels: Return allocated channels locked. This change makes ast_channel_alloc return allocated channels locked. By doing so no other thread can acquire, lock, and manipulate the channel before it is completely set up. (closes issue AST-1256) Review: https://reviewboard.asterisk.org/r/3067/ ........ Merged revisions 404204 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404210 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Rusty Newton	f7c60b8fb6	Several components: fixing Typos in comments and code, "avaliable" instead of "available" (issue ASTERISK-23021) (closes issue ASTERISK-23021) Reported by: Jeremy Lainé Tested by: Rusty Newton Patches: available.patch uploaded by Jeremy Lainé (license 6561) ........ Merged revisions 404046 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404047 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Jonathan Rose	b0bb03e916	bridging: Give bridges a name and a known creator Bridges have two new optional properties, a creator and a name. Certain consumers of bridges will automatically provide bridges that they create with these properties. Examples include app_bridgewait, res_parking, app_confbridge, and app_agent_pool. In addition, a name may now be provided as an argument to the POST function for creating new bridges via ARI. (closes issue AFS-47) Review: https://reviewboard.asterisk.org/r/3070/ ........ Merged revisions 404042 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404043 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
David M. Lee	744556c01d	security: Inhibit execution of privilege escalating functions This patch allows individual dialplan functions to be marked as 'dangerous', to inhibit their execution from external sources. A 'dangerous' function is one which results in a privilege escalation. For example, if one were to read the channel variable SHELL(rm -rf /) Bad Things(TM) could happen; even if the external source has only read permissions. Execution from external sources may be enabled by setting 'live_dangerously' to 'yes' in the [options] section of asterisk.conf. Although doing so is not recommended. Also, the ABI was changed to something more reasonable, since Asterisk 12 does not yet have a public release. (closes issue ASTERISK-22905) Review: http://reviewboard.digium.internal/r/432/ ........ Merged revisions 403913 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 403917 from http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged revisions 403959 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403960 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Joshua Colp	d7b84b0368	res_pjsip: Apply outbound proxy to all SIP requests. Objects which are involved in SIP request creation and sending now allow an outbound proxy to be specified. For cases where an endpoint is used the outbound proxy specified there will be applied. (closes issue ASTERISK-22673) Reported by: Antti Yrjola Review: https://reviewboard.asterisk.org/r/3022/ ........ Merged revisions 403811 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403812 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Joshua Colp	3a5cc054ed	res_stasis: Expose event for call forwarding and follow forwarded channel. This change adds an event for when an originated call is redirected to another target. This event contains the original channel and the newly created channel. If a stasis subscription exists on the original originated channel for a stasis application then a new subscription will also be created on the stasis application to the redirected channel. This allows the application to follow the call path completely. (closes issue ASTERISK-22719) Reported by: Joshua Colp Review: https://reviewboard.asterisk.org/r/3054/ ........ Merged revisions 403808 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403810 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Jonathan Rose	63b2c28c4b	Transfers: Make Asterisk set ATTENDEDTRANSFER/BLINDTRANSFER more reliably There were still a few cases in which ATTENDEDTRANSFER and BLINDTRANSFER wouldn't be set on channels involved with blind and attended transfers. This would happen with features that were initialized by channel driver specific mechanisms in multiparty calls. This patch resolves those cases while attempted to keep the behavior for setting those variables as consistent as possible. (closes issue AFS-24) Review: https://reviewboard.asterisk.org/r/3040/ ........ Merged revisions 403781 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403783 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Kevin Harwell	84e1790beb	bridge_native_rtp: Deadlock during 4-way conference creation The change contains a slightly adjusted patch that was on the issue (submitted by kmoore). A fix was made by adding in a bridge lock while calling bridge_start/stop from the framehook callback. Since the framehook callback is not called from the bridging core the bridge is not locked, but needs to be before calling bridge_start. (closes issue ASTERISK-22749) Reported by: Kinsey Moore Review: https://reviewboard.asterisk.org/r/3066/ Patches: lock_inversion.diff uploaded by kmoore (license 6273) ........ Merged revisions 403767 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403768 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Kevin Harwell	ce18946de4	ARI: Adding a channel to a bridge while a live recording is active blocks Added the ability to have rules that are checked when adding and/or removing channels to/from a bridge. In this case, if a channel is currently recording and someone attempts to add it to a bridge an "is recording" rule is checked, fails, and a 409 conflict is returned. Also command functions now return an integer value that can be descriptive of what kind of problems, if any, occurred before or during execution. (closes issue ASTERISK-22624) Reported by: Joshua Colp Review: https://reviewboard.asterisk.org/r/2947/ ........ Merged revisions 403749 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403750 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Richard Mudgett	3a5e4317f5	test_voicemail_api: Add check for a registered voicemail provider before tests. It is much nicer diagnosing a test failure if app_voicemail is actually loaded. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403726 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Kevin Harwell	c602b086ed	res_pjsip_messaging: send message to a default outbound endpoint In some cases messages need to be sent to a direct URI (sip:<ip address>). This patch adds in that support by using a default outbound endpoint. When sending messages, if no endpoint can be found then the default one is used. To facilitate this a new default_outbound_endpoint option was added to the globals section for pjsip.conf. Review: https://reviewboard.asterisk.org/r/2944/ ........ Merged revisions 403680 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403687 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Richard Mudgett	8183bba99a	app_voicemail: Voicemail callback registration/unregistration function improvements. * The voicemail registration/unregistration functions now take a struct of callbacks instead of a lengthy parameter list of callbacks. * The voicemail registration/unregistration functions now prevent a competing module from interfering with an already registered callback supplying module. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403643 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Matthew Jordan	ce423d2ea4	func_channel, chan_pjsip: Add CHANNEL read function support for chan_pjsip This patch adds CHANNEL read support for chan_pjsip. This allows the dialplan to use the CHANNEL function on a chan_pjsip channel to obtain run-time information about the channel from the PJSIP channel driver and the PJSIP stack. This includes: * RTP information, including source/destination media addresses, whether or not the media is secure, held, and other properties. * RTCP information. This includes sets of parseable information, as well as individual statistic attriutes. * PJSIP information. This includes URIs, local/remote signalling addresses, whether or not the signalling is secure, and other properties. * The endpoint name. This can be used in conjunction with the PJSIP_ENDPOINT function to obtain more detailed endpoint information. Review: https://reviewboard.asterisk.org/r/3038/ ........ Merged revisions 403618 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403619 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Jonathan Rose	f6e92c35df	app_page: Add predial handlers for app_page. (closes issue AFS-14) Review: https://reviewboard.asterisk.org/r/3045/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403576 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Mark Michelson	b18ed67d16	Switch PJSIP auth to use a vector. Since Asterisk has a vector API now, places where arrays are manually resized don't really make sense any more. Since the auth work in PJSIP was freshly-written, it was easy to reform it to use a vector. Review: https://reviewboard.asterisk.org/r/3044 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403499 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
David M. Lee	1212906351	Reverting r403311. It's causing ARI tests to hang. ........ Merged revisions 403398 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403404 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Joshua Colp	b8025e789d	res_pjsip_session: Add support for PJMEDIA_SDP_NEG_ALLOW_MEDIA_CHANGE flag. Newer versions of PJSIP have changed to using a flag for the PJMEDIA_SDP_NEG_ALLOW_MEDIA_CHANGE instead of a define. This adds a configure check to detect the presence of the flag and use it if found. ........ Merged revisions 403329 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403330 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Richard Mudgett	3357c494cb	sorcery, bucket: Change observer remove calls to take const callbacks struct. * Make ast_sorcery_observer_remove() accept a const callbacks struct. * Make ast_sorcery_observer_remove() tolerant of the sorcery parameter being NULL. Now it can be called within a module unload routine if the sorcery initialization fails. * Fix ast_sorcery_observer_add() to fail if the container link fails. ........ Merged revisions 403324 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403327 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Mark Michelson	8e8b329e14	Add channel locking for channel snapshot creation. This adds channel locks around calls to create channel snapshots as well as other functions which operate on a channel and then end up creating a channel snapshot. Functions that expect the channel to be locked prior to being called have had their documentation updated to indicate such. ........ Merged revisions 403311 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403314 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Joshua Colp	0620cc0c00	res_pjsip_transport_websocket: Fix security events and simplify implementation. Transport type determination for security events has been simplified to use the type present on the message itself instead of searching through configured transports to find the transport used. The actual WebSocket transport has also been simplified. It now leverages the existing PJSIP transport manager for finding the active WebSocket transport for outgoing messages. This removes the need for res_pjsip_transport_websocket to store a mapping itself. (closes issue ASTERISK-22897) Reported by: Max E. Reyes Vera J. Review: https://reviewboard.asterisk.org/r/3036/ ........ Merged revisions 403256 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403257 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Joshua Colp	a64cd7c6bb	res_pjsip_session: Add configurable behavior for redirects. The action taken when a redirect occurs is now configurable on a per-endpoint basis. The redirect can either be treated as a redirect to a local extension, to a URI that is dialed through the Asterisk core, or to a URI that is dialed within PJSIP itself. (closes issue ASTERISK-21710) Reported by: Matt Jordan Review: https://reviewboard.asterisk.org/r/2963/ ........ Merged revisions 403207 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403208 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Richard Mudgett	48c2b40ff3	astdb: Tweak some doxygen comments. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403192 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
David M. Lee	fccb427c88	ari:Add application/json parameter support The patch allows ARI to parse request parameters from an incoming JSON request body, instead of requiring the request to come in as query parameters (which is just weird for POST and DELETE) or form parameters (which is okay, but a bit asymmetric given that all of our responses are JSON). For any operation that does _not_ have a parameter defined of type body (i.e. "paramType": "body" in the API declaration), if a request provides a request body with a Content type of "application/json", the provided JSON document is parsed and searched for parameters. The expected fields in the provided JSON document should match the query parameters defined for the operation. If the parameter has 'allowMultiple' set, then the field in the JSON document may optionally be an array of values. (closes issue ASTERISK-22685) Review: https://reviewboard.asterisk.org/r/2994/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403177 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Joshua Colp	c321b1f454	Fix a configure issue with PJSIP transaction group lock detection. The configure check did not use the provided paths for pjproject if provided when looking for transaction group lock support. ........ Merged revisions 403160 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403161 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Kevin Harwell	ed48377994	ARI: Implement device state API Created a data model and implemented functionality for an ARI device state resource. The following operations have been added that allow a user to manipulate an ARI controlled device: Create/Change the state of an ARI controlled device PUT /deviceStates/{deviceName}&{deviceState} Retrieve all ARI controlled devices GET /deviceStates Retrieve the current state of a device GET /deviceStates/{deviceName} Destroy a device-state controlled by ARI DELETE /deviceStates/{deviceName} The ARI controlled device must begin with 'Stasis:'. An example controlled device name would be Stasis:Example. A 'DeviceStateChanged' event has also been added so that an application can subscribe and receive device change events. Any device state, ARI controlled or not, can be subscribed to. While adding the event, the underlying subscription control mechanism was refactored so that all current and future resource subscriptions would be the same. Each event resource must now register itself in order to be able to properly handle [un]subscribes. (issue ASTERISK-22838) Reported by: Matt Jordan Review: https://reviewboard.asterisk.org/r/3025/ ........ Merged revisions 403134 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403135 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Kevin Harwell	05cbf8df9b	res_pjsip: AMI commands and events. Created the following AMI commands and corresponding events for res_pjsip: PJSIPShowEndpoints - Provides a listing of all pjsip endpoints and a few select attributes on each. Events: EndpointList - for each endpoint a few attributes. EndpointlistComplete - after all endpoints have been listed. PJSIPShowEndpoint - Provides a detail list of attributes for a specified endpoint. Events: EndpointDetail - attributes on an endpoint. AorDetail - raised for each AOR on an endpoint. AuthDetail - raised for each associated inbound and outbound auth TransportDetail - transport attributes. IdentifyDetail - attributes for the identify object associated with the endpoint. EndpointDetailComplete - last event raised after all detail events. PJSIPShowRegistrationsInbound - Provides a detail listing of all inbound registrations. Events: InboundRegistrationDetail - inbound registration attributes for each registration. InboundRegistrationDetailComplete - raised after all detail records have been listed. PJSIPShowRegistrationsOutbound - Provides a detail listing of all outbound registrations. Events: OutboundRegistrationDetail - outbound registration attributes for each registration. OutboundRegistrationDetailComplete - raised after all detail records have been listed. PJSIPShowSubscriptionsInbound - A detail listing of all inbound subscriptions and their attributes. Events: SubscriptionDetail - on each subscription detailed attributes SubscriptionDetailComplete - raised after all detail records have been listed. PJSIPShowSubscriptionsOutbound - A detail listing of all outboundbound subscriptions and their attributes. Events: SubscriptionDetail - on each subscription detailed attributes SubscriptionDetailComplete - raised after all detail records have been listed. (issue ASTERISK-22609) Reported by: Matt Jordan Review: https://reviewboard.asterisk.org/r/2959/ ........ Merged revisions 403131 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403133 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Joshua Colp	eda7126862	ari: Add Snoop operation for spying/whispering on channels. The Snoop operation can be invoked on a channel to spy or whisper on it. It returns a channel that any channel operations can then be invoked on (such as record to do monitoring). (closes issue ASTERISK-22780) Reported by: Matt Jordan Review: https://reviewboard.asterisk.org/r/3003/ ........ Merged revisions 403117 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403118 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Kinsey Moore	d9015a5356	ARI: Don't leak implementation details This change prevents channels used as implementation details from leaking out to ARI. It does this by preventing creation of JSON blobs of channel snapshots created from those channels and sanitizing JSON blobs of bridge snapshots as they are created. This introduces a framework for excluding information from output targeted at Stasis applications on a consumer-by-consumer basis using channel sanitization callbacks which could be extended to bridges or endpoints if necessary. This prevents unhelpful error messages from being generated by ast_json_pack. This also corrects a bug where BridgeCreated events would not be created. (closes issue ASTERISK-22744) Review: https://reviewboard.asterisk.org/r/2987/ Reported by: David M. Lee ........ Merged revisions 403069 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403070 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Richard Mudgett	00e9a136bb	voicemail: Fixup some doxygen comments. ........ Merged revisions 402956 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402957 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
David M. Lee	d1ad4a95f8	ari: Add silence generator controls This patch adds the ability to start a silence generator on a channel via ARI. This generator will play silence on the channel (avoiding audio timeouts on the peer) until it is stopped, or some other media operation is started (like playing media, starting music on hold, etc.). (closes issue ASTERISK-22514) Review: https://reviewboard.asterisk.org/r/3019/ ........ Merged revisions 402926 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402928 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Joshua Colp	1b14a78d14	res_pjsip: Add support for building against pjproject with SIP transaction group lock support. SIP transaction group lock support has been backported into our pjproject. Since the code now internally uses a group lock the code is now changed to unlock it if present. Note that the act of finding the transaction is what actually returns it locked. For further information about group locks check out the wiki page at: http://trac.pjsip.org/repos/wiki/Group_Lock (issue ASTERISK-22818) Reported by: Matt Jordan ........ Merged revisions 402864 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402865 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Joshua Colp	67b650543c	res_ari_channels: Add the ability to stop locally generated ringing on a channel. Using the 'ring' operation it is possible to start locally generated ringback if the channel is answered. This change adds the ability to stop it by using DELETE. ........ Merged revisions 402804 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402805 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Jonathan Rose	bf5492abd2	security_events: Push out security events over AMI events Security Events will now be written to any listener of the new 'security' class Review: https://reviewboard.asterisk.org/r/2998/ ........ Merged revisions 402584 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402585 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Matthew Jordan	aa05fde22d	netsock2: Define AST_AF_* enum constants to their AF_* equivalents This patch explicitly defines AST_AF_* enum constants to their sys/socket.h defined equivalents. It is certainly unclear why these constants actually have to exist, given that netsock2.h includes sys/socket.h; however, since the code base is already liberally sprinkled with the usage of AST_AF_* (as well as with direct calls to AF_*), this will at least keep the semantics consistent between their usage across systems. ........ Merged revisions 402503 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402504 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago

1 2 3 4 5 ...

2933 Commits (fc241d6f52f82f65a9ba99c1fae00be89834fa02)