23 Commits (f96d7ef7b50e1b0b3b51a0d1321b16a59acae91b)

Author	SHA1	Message	Date
George Joseph	5e3652e738	pjproject_bundled: Increase PJSIP_MAX_MODULE to 38 ... The default is 32 with 8 being used by pjproject itself. Recent commits have put us over the limit resulting in assertions in pjproject. Since this value is used in invites, dialogs, transports and subscriptions as well as the global pjproject endpoint, we don't want to increase it too much. Resolves: #255 (cherry picked from commit caf51592e7)	2 years ago
Joshua C. Colp	b3f39be0cc	pjsip: Increase maximum number of format attributes. ... Chrome has added more attributes, causing the limit to be exceeded. This raises it up some more. ASTERISK-30015 Change-Id: I964957c005c4e6f7871b15ea1ccd9b4659c7ef32	3 years ago
Joshua C. Colp	fa0078fbe4	pjproject: Update bundled to 2.12 release. ... This change removes patches which have been merged into upstream and updates some existing ones. It also adds some additional config_site.h changes to restore previous behavior, as well as a patch to allow multiple Authorization headers. There seems to be some confusion or disagreement on language in RFC 8760 in regards to whether multiple Authorization headers are supported. The RFC implies it is allowed, as does some past sipcore discussion. There is also the catch all of "local policy" to allow it. In the case of Asterisk we allow it. ASTERISK-29351 Change-Id: Id39ece02dedb7b9f739e0e37ea47d76854af7191	3 years ago
Joshua C. Colp	9f641483e6	websocket / pjsip: Increase maximum packet size. ... When dealing with a lot of video streams on WebRTC the resulting SDPs can grow to be quite large. This effectively doubles the maximum size to allow more streams to exist. The res_http_websocket module has also been changed to use a buffer on the session for reading in packets to ensure that the stack space usage is not excessive. Change-Id: I31d4351d70c8e2c11564807a7528b984f3fbdd01	5 years ago
Joshua C. Colp	3078a00a6d	pjsip: Increase maximum ICE candidate count. ... In practice it has been seen that some users come close to our maximum ICE candidate count of 32. In case people have gone over this increases the count to 64, giving ample room. ASTERISK-28859 Change-Id: I35cd68948ec0ada86c14eb53092cdaf8b62996cf	5 years ago
Alexander Traud	e19080a184	Bundled PJPROJECT: Disable internal connection oriented keep-alive. ... Turn off the periodic sending of CRLNCRLN. Default is on (90 seconds), which conflicts with the global section's keep_alive_interval option in pjsip.conf. patches: pjsip_keep_not_alive.patch submitted by Alexander Traud (License 6520) ASTERISK-27347 Change-Id: I6a197f56e1830d3b7e5ec70f17025840a290b057	7 years ago
Richard Mudgett	c711e4076a	core: Remove ABI effects of MALLOC_DEBUG. ... This allows asterisk to be compiled with MALLOC_DEBUG to load modules built without MALLOC_DEBUG. Now pre-compiled third-party modules will still work regardless of MALLOC_DEBUG being enabled or not. Change-Id: Ic07ad80b2c2df894db984cf27b16a69383ce0e10	7 years ago
Joshua Colp	e2715d2cd4	pjproject: Clean up disabling of WebRTC support. ... The definition in config_site.h and the argument to the configure script are not necessary to disable WebRTC support. The correct argument, --disable-libwebrtc, is already passed. ASTERISK-26980 Change-Id: I27da2c894f87914956a72710222e17462d8a44bc	8 years ago
Corey Farrell	fb585cf185	Bundled pjproject: Enable pj_assert when dev-mode is enabled. ... ASTERISK-27359 Change-Id: Ib01fb6c01f9bb87129374a51cb9318c474147517	8 years ago
Benjamin Keith Ford	e7d9e42616	pjsip: Increase maximum packet size. ... The maximum packet size for PJSIP has been increased to handle the multiple streams being added for WebRTC. Change-Id: I9ea1e8d02668c544acadcb1c6200e1cc1bd588b3	8 years ago
George Joseph	a537dae6d0	pjproject_bundled: Update for pjproject 2.6 ... * Removed all 2.5.5 functional patches. * Updated usages of pj_release_pool to be "safe". * Updated configure options to disable webrtc. * Updated config_site.h to disable webrtc in pjmedia. * Added Richard Mudgett's recent resolver patches. Change-Id: Ib400cc4dfca68b3d07ce14d314e829bfddc252c7	8 years ago
George Joseph	ceb9dae566	pjproject_bundled: Compile pjsua with max log level = 2 ... A while back, we changed config_site.h to set PJ_LOG_MAX_LEVEL = 6. This allowed us to control the log level better from inside Asterisk. An unfortunate side effect of this was that the pjsua binary and python bindings were also compiled with log level set to 6 so whenever a testsuite test that uses pjsua runs, it spits out 6795 lines of debug in an instant even before the test starts. I believe this overruns the Jenkins capture buffer and prevents the test from properly terminating. In turn, this results in the testsuite just hanging until the job is killed. It's more frequent on the higher end agents because they can spit out the messages faster. Unfortunately, the messages are all spit out before we have control of the python pj.Lib instance where we can set logging levels so the only alternative was to actually compile pjsua and _pjsua.so with an overridden PJ_LOG_MAX_LEVEL. Although defining a lower max level was done in the Makefile, the define in config_site.h had to be wrapped with "#ifndef" so the change would take effect. Change-Id: I2af9e7d48dde1927279c586c9c725d868fe6f3ff	9 years ago
Richard Mudgett	76d52dc228	Bundled pjproject: Fix finding SIP transactions. ... Occasionally SIP message transactions are not found when they should be. In the particular case an incoming INVITE transaction is CANCELed but the INVITE transaction cannot be found so a 481 response is returned for the CANCEL. The problematic calls have a '_' character in the Via branch parameter. The problem is in the pjproject PJ_HASH_USE_OWN_TOLOWER feature's code. The problem with the "own tolower" code is that it does not calculate the same hash value as when the pj_tolower() function is used. The "own tolower" code will erroneously modify the ASCII characters '@', '[', '\\', ']', '^', and '_'. Calls to pj_hash_calc_tolower() can use the PJ_HASH_USE_OWN_TOLOWER substitute algorithm when enabled. Calls to pj_hash_get_lower(), pj_hash_set_lower(), and pj_hash_set_np_lower() call find_entry() which never uses the PJ_HASH_USE_OWN_TOLOWER algorithm. As a result you may not be able to find a hash tabled entry because the calculated hash values would differ. * Simply disable PJ_HASH_USE_OWN_TOLOWER. ASTERISK-26490 #close Change-Id: If89bfdb5f301b8b685881a9a2a6e0c3c5af32253	9 years ago
Richard Mudgett	1dfa11b65c	PJPROJECT logging: Made easier to get available logging levels. ... Use of the new logging is as simple as issuing the new CLI command or setting the new pjproject.conf option. Other options that can affect the logging are how you have the pjproject log levels mapped to Asterisk log types in pjproject.conf and if you have configured Asterisk to log the DEBUG type messages. Altering the pjproject.conf level mapping shouldn't be necessary for most installations as the default mapping is sensible. Configuring Asterisk to log the DEBUG message type is standard practice for collecting debug information. * Added CLI "pjproject set log level" command to dynamically adjust the maximum pjproject log message level. * Added CLI "pjproject show log level" command to see the currently set maximum pjproject log message level. * Added pjproject.conf startup section "log_level" option to set the initial maximum pjproject log message level so all messages could be captured from initialization. * Set PJ_LOG_MAX_LEVEL to 6 to compile in all defined logging levels into bundled pjproject. Pjproject will use the currently set run time log level to determine if a log message is generated just like Asterisk verbose and debug logging levels. * In log_forwarder(), made always log enabled and mapped pjproject log messages. DEBUG mapped log messages are no longer gated by the current Asterisk debug logging level. * Removed RAII_VAR() from res_pjproject.c:get_log_level(). ASTERISK-26630 #close Change-Id: I6dca12979f482ffb0450aaf58db0fe0f6d2e5389	9 years ago
Matt Jordan	edd7ae85e8	pjproject: Use a much higher limit for PJ_ICE_MAX_CHECKS ... The PJ_ICE_MAX_CHECKS constant is used by pjproject to determine how many pairs of local/remote candidates will be made. If for some reason we reach this upper bound, ICE will generally fail and no media will flow between the browser and Asterisk. This patch makes PJ_ICE_MAX_CHECKS set to the total possible number of pairs of candidates we'd theoretically allow, which is PJ_ICE_MAX_CAND^2. Prior to this patch, we simply multiplied PJ_ICE_MAX_CAND by two; on systems with multiple interfaces (I blame Docker), this is far too low to allow WebRTC calls to succeed. Setting this to be PJ_ICE_MAX_CAND^2 allowed WebRTC calls to succeed even when the system Asterisk was running on had quite a few virtual interfaces. Change-Id: Icd4f17de0ac9d3a83dddfc8bf1cb7616bc107d55	9 years ago
Joshua Colp	6233e146c6	res_pjsip_sdp_rtp: Limit number of formats to defined maximum. ... The res_pjsip_sdp_rtp module did not restrict the number of formats added to a media stream in the SDP to the defined limit. If allow=all was used with additional loaded codecs this could result in the next media stream being overwritten some. This change restricts the module to limit it to the defined maximum and also increases the maximum in our bundled pjproject. ASTERISK-26541 #close Change-Id: I0dc5f59d3891246cafa2f3df5ec406f088559ee8	9 years ago
George Joseph	c5e8f50169	pjproject_bundled: Add MALLOC_DEBUG capability ... pjproject_bundled will now use the asterisk memory debugging APIs if MALLOC_DEBUG is turned on in menuselect. Because this required stubs for the executable programs and the python bindings, some Makefile reorganization was needed to properly handle the dependencies. As a result, the makefile now individually makes each of the pjproject libraries separately instead of making them all in 1 shot. The only visible change is that there are separate status lines printed for each library instead oif 1 for all libs. Also, the making of the pjproject dependency files was eliminated. They're not needed for building unless you're actively modifying pjproject source files and it makes the build process faster. Finally, any issues with parallel builds should be resolved again making the build faster. Change-Id: Icc5e3d658fbfb00e0a46b44c66dcc2522d5171b0	9 years ago
George Joseph	a7487e9261	pjproject_bundled: Disable srtp use by pjmedia ... The reason for the disable is that while Asterisk works fine with older libsrtp versions, newer versions of pjproject won't compile with them. Debian 6 for instance, has libsrtp 1.4.4 which is older than what pjproject is expecting. We don't use most of pjmedia but we DO use it for SDP negotiation. Luckily disabling srtp in pjmedia doesn't interfere with it's ability to negitiate a secure channel. The proper crypto attributes are negotiated in both directions. ASTERISK-26279 #close Change-Id: Id25a92cdf3df97a26c53cffae65b6b82de33c8e2	9 years ago
George Joseph	b4f1c6380e	pjproject_bundled: Update for pjproject 2.5.5 ... Add more --disable-* switches to Makefile.rules including --disable-opus which was causing bundled pjproject to fail with "undefined reference" errors in libasteriskpj. Changed PJ_ENABLE_EXTRA_CHECK to 1. Removed 2 obsolete patches and added a new one. The new one was merged by Teluu on 6/27/2016. ASTERISK-26148 #close Change-Id: Ib8af6c6a9d31f7238ce65b336134c2efdc855063	9 years ago
Matt Jordan	9129ac8e73	pjproject/patches/config_site: Increase the max number of ICE candidates ... When negotiating ICE candidates with WebRTC capable endpoints, many networks will result in a browser offering ICE candidates that exceeds the default number of max candidates, 16. This patch bumps the max candidates to 32, with the max checks at twice the number of candidates. In practice, this has shown to be sufficient for browser/WebRTC negotiation. Change-Id: Ifd8da8b315f5ae14814d4ce20e10d2e6355020e5	9 years ago
George Joseph	30415944a8	pjproject_bundled: Disable PJSIP_UNESCAPE_IN_PLACE ... When pjsip_parse_uri is called with PJSIP_UNESCAPE_IN_PLACE enabled, the input uri string will become corrupted if it contains escape sequences. It's not possible to automatically strdup or strdupa the input string because the output uri pj_str_t's will have pointers to chunks of the input string. Getting around this would require more memory management code and wouldn't be worth the savings of doing the unescape in place. ASTERISK-25970 #close Reported-by: Dmitriy Serov Change-Id: I28dc0e599b5108f7959b9c46dc8278371b372f88	9 years ago
George Joseph	392341ba37	pjproject-bundled: Cleanups for reported issues ... PortAudio should no longer be required PJSIP_MAX_PKT_LEN is now 6000 Older autoconf issue fixed. (CentOS 6) Change-Id: I463fa9586cbe7c6b3b603289f535bd8e361611dd	9 years ago
George Joseph	3173e91bab	build-system: Allow building with static pjproject ... Background here: http://lists.digium.com/pipermail/asterisk-dev/2016-January/075266.html From CHANGES: * To help insure that Asterisk is compiled and run with the same known version of pjproject, a new option (--with-pjproject-bundled) has been added to ./configure. When specified, the version of pjproject specified in third-party/versions.mak will be downloaded and configured. When you make Asterisk, the build process will also automatically build pjproject and Asterisk will be statically linked to it. Once a particular version of pjproject is configured and built, it won't be configured or built again unless you run a 'make distclean'. To facilitate testing, when 'make install' is run, the pjsua and pjsystest utilities and the pjproject python bindings will be installed in ASTDATADIR/third-party/pjproject. The default behavior remains building with the shared pjproject installation, if any. Building: All you have to do is include the --with-pjproject-bundled option on the ./configure command line (and remove any existing --with-pjproject option if specified). Everything else is automatic. Behind the scenes: The top-level Makefile was modified to include 'third-party' in the list of MOD_SUBDIRS. The third-party directory was created to contain any third party packages that may be needed in the future. Its Makefile automatically iterates over any subdirectories passing on targets. The third-party/pjproject directory was created to house the pjproject source distribution. Its Makefile contains targets to download, patch configure, generate dependencies, compile libs, apps and python bindings, sanitized build.mak and generate a symbols list. When bootstrap.sh is run, it automatically includes the configure.m4 file in third-party/pjproject. This file has a macro to download and conifgure pjproject and get and set PJPROJECT_INCLUDE, PJPROJECT_DIR and PJPROJECT_BUNDLED. It also tests for the capabilities like PJ_TRANSACTION_GRP_LOCK by parsing preprocessor output as opposed to trying to compile. Of course, bootstrap.sh is only run once and the configure file is incldued in the patch. When configure is run with the new options, the macro in configure.m4 triggers the download, patch, conifgure and tests. No compilation is performed at this time. The downloaded tarball is cached in /tmp so it doesn't get downloaded again on a distclean. When make is run in the top-level Asterisk source directory, it will automatically descend all the subdirectories in third_party just as it does for addons, apps, etc. The top-level Makefile makes sure that the 'third-party' is built before 'main' so that dependencies from the other directories are built first. When main does build, a new shared library (libasteriskpj) is created that links statically to the pjproject .a files and exports all their symbols. The asterisk binary links to that, just as it does with libasteriskssl. When Asterisk is installed, the pjsua and pjsystest apps, and the pjproject python bindings are installed in ASTDATADIR/third-party/pjproject. This will facilitate testing, including running the testsuite which will be updated to check that directory for the pjsua module ahead of the system python library. Modules should continue to depend on pjproject if they use pjproject APIs directly. They should not care about the implementation. No changes to any res_pjsip modules were made. Change-Id: Ia7a60c28c2e9ba9537c5570f933c1ebcb20a3103	9 years ago