Currently chan_pjsip on receiving a re-INVITE without SDP will only
return the codecs that are previously negotiated and not offering
all enabled codecs.
This causes interoperability issues with different equipment (e.g.
from Cisco) for some of our customers and probably also in other
scenarios involving 3PCC infrastructure.
According to RFC 3261, section 14.2 we SHOULD return all codecs
on a re-INVITE without SDP
The PR proposes a new parameter to configure this behaviour:
all_codecs_on_empty_reinvite. It includes the code, documentation,
alembic migrations, CHANGES file and example configuration additions.
ASTERISK-30193 #close
Change-Id: I69763708d5039d512f391e296ee8a4d43a1e2148
The PJSIP notify CLI commands allow for using
"options" configured in pjsip_notify.conf.
This allows these same options to be used in
AMI actions as well.
Additionally, as part of this improvement,
some repetitive common code is refactored.
ASTERISK-30263 #close
Change-Id: Ie4496b322b63b61eaf9672183a959ab99a04b6b5
Expands the pjsip logger to support the ability to filter
by SIP message method. This can make certain types of SIP debugging
easier by only logging messages of particular method(s).
ASTERISK-30146 #close
Co-authored-by: Sean Bright <sean@seanbright.com>
Change-Id: I9c8cbb6fc8686ef21190eb42e08bc9a9b147707f
Allows bridging, parking, and dial messages to be globally
ignored for all CDRs such that only a single CDR record
is generated per channel.
This is useful when CDRs should endure for the lifetime of
an entire channel and bridging and dial updates in the
dialplan should not result in multiple CDR records being
created for the call. With the ignore bridging option,
bridging changes have no impact on the channel's CDRs.
With the ignore dial state option, multiple Dials and their
outcomes have no impact on the channel's CDRs. The
last disposition on the channel is preserved in the CDR,
so the actual disposition of the call remains available.
These two options can reduce the amount of "CDR hacks" that
have hitherto been necessary to ensure that CDR was not
"spoiled" by these messages if that was undesired, such as
putting a dummy optimization-disabled local channel between
the caller and the actual call and putting the CDR on the channel
in the middle to ensure that CDR would persist for the entire
call and properly record start, answer, and end times.
Enabling these options is desirable when calls correspond
to the entire lifetime of channels and the CDR should
reflect that.
Current default behavior remains unchanged.
ASTERISK-30091 #close
Change-Id: I393981af42732ec5ac3ff9266444abb453b7c832
Adds support for detecting audible ringback tone
to the TONE_DETECT function using the p option.
ASTERISK-30254 #close
Change-Id: Ie2329ff245248768367d26749c285fbe823f6414
This patch adds support for mediasec SIP headers and SDP attributes.
These are defined in RFC 3329, 3GPP TS 24.229 and
draft-dawes-sipcore-mediasec-parameter. The new features are
implemented so that a backbone for RFC 3329 is present to streamline
future work on RFC 3329.
With this patch, Asterisk can communicate with Deutsche Telekom trunks
which require these fields.
ASTERISK-30032
Change-Id: Ia7f5b5ba42db18074fdd5428c4e1838728586be2
Adds the n "no answer" option to the Bridge application
so that answer supervision can not automatically
be provided when Bridge is executed.
Additionally, a mechanism (dialplan variable)
is added to prevent bridge targets (typically the
target of a masquerade) from answering the channel
when they enter the bridge.
ASTERISK-30223 #close
Change-Id: I76f73fcd8e403bcd18f2abb40c658f537ac1ba6d
Adds the n option to not answer the channel when calling
BridgeWait, so the application can be used without
forcing answer supervision.
ASTERISK-30216 #close
Change-Id: I6b85ef300b1f7b5170f8537e2b10889cc2e6605a
Adds an option that will play an audio file
to the party while AMD is running on the
channel, so the called party does not just
hear silence.
ASTERISK-30179 #close
Change-Id: I4af306274552b61b3d9f0883c33f698abd4699b6
Adds the EXPORT function, which allows write
access to variables and functions on other
channels.
ASTERISK-29432 #close
Change-Id: I7492645ae4307553d0f586d78e13a4f586231fdf
This patch adds a new option to the 100rel parameter for pjsip
endpoints called "peer_supported". When an endpoint with this option
receives an incoming request and the request indicated support for the
100rel extension, then Asterisk will send 1xx responses reliably. If
the request did not indicate 100rel support, Asterisk sends 1xx
responses normally.
ASTERISK-30158
Change-Id: Id6d95ffa8f00dab118e0b386146e99f254f287ad
Adds TRIM, LTRIM, and RTRIM, which can be used
for trimming leading and trailing whitespace
from strings.
ASTERISK-30222 #close
Change-Id: I50fb0c40726d044a7a41939fa9026f3da4872554
Adding user=phone to local-side uri's when user_eq_phone=yes is set for
an endpoint. Previously this would only add the header to the To and R-URI.
ASTERISK-30178
Change-Id: Id3bfb5d225d762e7d2668c023fe09e4541ae8600
This change adds an option, answeredonly, that will prevent music on
hold on channels that are not answered.
ASTERISK-30135
Change-Id: I1ab0defa43a29a26ae39f94c623596cf90fddc08
Adds an AMI event to indicate that a deadlock
has likely started, when Asterisk is compiled
with DETECT_DEADLOCKS enabled. This can make
it easier to perform automated deadlock detection
and take appropriate action (such as doing a core
dump). Unlike the deadlock warnings, the AMI event
is emitted only once per deadlock.
ASTERISK-30161 #close
Change-Id: Ifc6ed3e390f8b4cff7f8077a50e4d7a5b54e42fb
Adds the end_marked_any option, which can be used
to kick a user from a conference if any marked user
leaves.
ASTERISK-30211 #close
Change-Id: I9e8da7ccb892e522546c0f2b5476d172e022c2f5
Added an 'a' option to the GEOLOC_PROFILE function to allow
variable lists like location_info_refinement to be appended
to instead of replacing the entire list.
Added an 'r' option to the GEOLOC_PROFILE function to resolve all
variables before a read operation and after a Set operation.
Added a few missing parameters to the ones allowed for writing
with GEOLOC_PROFILE.
Fixed a bug where calling GEOLOC_PROFILE to read a parameter
might actually update the profile object.
Cleaned up XML documentation a bit.
ASTERISK-30190
Change-Id: I75f541db43345509a2e86225bfa4cf8e242e5b6c
You can now specify the location object's format, location_info,
method, location_source and confidence parameters directly on
a profile object for simple scenarios where the location
information isn't common with any other profiles. This is
mutually exclusive with setting location_reference on the
profile.
Updated appdocsxml.dtd to allow xi:include in a configObject
element. This makes it easier to link to complete configOptions
in another object. This is used to add the above fields to the
profile object without having to maintain the option descriptions
in two places.
ASTERISK-30185
Change-Id: Ifd5f05be0a76f0a6ad49fa28d17c394027677569
Added profile parameter "suppress_empty_ca_elements" that
will cause Civic Address elements that are empty to be
suppressed from the outgoing PIDF-LO document.
Fixed a possible SEGV if a sub-parameter value didn't have a
value.
ASTERISK-30177
Change-Id: I924ccc5aa2f45110a3155b22e53dfaf3ef2092dd
The trigger to perform outgoing geolocation processing is the
presence of a geoloc_outgoing_call_profile on an endpoint. This
is intentional so as to not leak location information to
destinations that shouldn't receive it. In a totally dynamic
configuration scenario however, there may not be any profiles
defined in geolocation.conf. This makes it impossible to do
outgoing processing without defining a "dummy" profile in the
config file.
This commit adds 4 built-in profiles:
"<prefer_config>"
"<discard_config>"
"<prefer_incoming>"
"<discard_incoming>"
The profiles are empty except for having their precedence
set and can be set on an endpoint to allow processing without
entries in geolocation.conf. "<discard_config>" is actually the
best one to use in this situation.
ASTERISK-30182
Change-Id: I1819ccfa404ce59802a3a07ad1cabed60fb9480a
This change adds support using the pjsip_tls_transport_restart
function for reloading the TLS certificate and key, if the filenames
remain unchanged. This is useful for Let's Encrypt and other
situations. Note that no restart of the transport will occur if
the certificate and key remain unchanged.
ASTERISK-30186
Change-Id: I9bc95a6bf791830a9491ad9fa43c17d4010028d0
Adds additional control options over the transfer
feature functionality to give users more control
in how the transfer feature sounds and works.
First, the "transfer" sound that plays when a transfer is
initiated can now be customized by the user in
features.conf, just as with the other transfer sounds.
Secondly, the user can now specify the transfer extension
in advance by using the TRANSFER_EXTEN variable. If
a valid extension is contained in this variable, the call
will automatically be transferred to this destination.
Otherwise, it will fall back to collecting the extension
from the user as is always done now.
ASTERISK-29899 #close
Change-Id: Ibff309caa459a2b958706f2ed0ca393b1ef502e3
* Added processing for the 'confidence' element.
* Added documentation to some APIs.
* removed a lot of complex code related to the very-off-nominal
case of needing to process multiple location info sources.
* Create a new 'ast_geoloc_eprofile_to_pidf' API that just takes
one eprofile instead of a datastore of multiples.
* Plugged a huge leak in XML processing that arose from
insufficient documentation by the libxml/libxslt authors.
* Refactored stylesheets to be more efficient.
* Renamed 'profile_action' to 'profile_precedence' to better
reflect it's purpose.
* Added the config option for 'allow_routing_use' which
sets the value of the 'Geolocation-Routing' header.
* Removed the GeolocProfileCreate and GeolocProfileDelete
dialplan apps.
* Changed the GEOLOC_PROFILE dialplan function as follows:
* Removed the 'profile' argument.
* Automatically create a profile if it doesn't exist.
* Delete a profile if 'inheritable' is set to no.
* Fixed various bugs and leaks
* Updated Asterisk WiKi documentation.
ASTERISK-30167
Change-Id: If38c23f26228e96165be161c2f5e849cb8e16fa0
Adds the DBGetTree action, which can be used to
retrieve all of the DB keys beginning with a
particular prefix, similar to the capability
provided by the database show CLI command.
ASTERISK-30136 #close
Change-Id: I3be9425e53be71f24303fdd4d2923c14e84337e6
Adds a POLARITY function which can be used to
retrieve the current polarity of an FXS channel
as well as set the polarity of an FXS channel
to idle or reverse at any point during a call.
ASTERISK-30000 #close
Change-Id: If6f50998f723e4484bf68e2473f5cedfeaf9b8f1
This commit adds res_pjsip_geolocation which gives chan_pjsip
the ability to use the core geolocation capabilities.
This commit message is intentionally short because this isn't
a simple capability. See the documentation at
https://wiki.asterisk.org/wiki/display/AST/Geolocation
for more information.
THE CAPABILITIES IMPLEMENTED HERE MAY CHANGE BASED ON
USER FEEDBACK!
ASTERISK-30128
Change-Id: Ie2e2bcd87243c2cfabc43eb823d4427c7086f4d9
This commit adds res_geolocation which creates the core capabilities
to manipulate Geolocation information on SIP INVITEs.
An upcoming commit will add res_pjsip_geolocation which will
allow the capabilities to be used with the pjsip channel driver.
This commit message is intentionally short because this isn't
a simple capability. See the documentation at
https://wiki.asterisk.org/wiki/display/AST/Geolocation
for more information.
THE CAPABILITIES IMPLEMENTED HERE MAY CHANGE BASED ON
USER FEEDBACK!
ASTERISK-30127
Change-Id: Ibfde963121b1ecf57fd98ee7060c4f0808416303
Adds a CLI command similar to "dialplan eval function" except for
applications: "dialplan exec application", useful for quickly
testing certain application behavior directly from the CLI
without writing any dialplan.
ASTERISK-30062 #close
Change-Id: I42e9fa9b60746c21450d40f99a026d48d2486dde
These new functions allow retrieving information from headers on 200 OK
INVITE response.
ASTERISK-29999
Change-Id: I264a610a9333359297a0825feb29a1bb4f4ad144
Rightly the use of wildcards in certificates is disallowed in accordance
with RFC5922. However, RFC2818 does make some allowances with regards to
their use when using subject alt names with DNS name types.
As such this patch creates a new setting for TLS transports called
'allow_wildcard_certs', which when it and 'verify_server' are both enabled
allows DNS name types, as well as the common name that start with '*.'
to match as a wildcard.
For instance: *.example.com
will match for: foo.example.com
Partial matching is not allowed, e.g. f*.example.com, foo.*.com, etc...
And the starting wildcard only matches for a single level.
For instance: *.example.com
will NOT match for: foo.bar.example.com
The new setting is disabled by default.
ASTERISK-30072 #close
Change-Id: If0be3fdab2e09c2a66bb54824fca406ebaac3da4
Adds an option to VoiceMailMain that prevents the user
from deleting messages during that application invocation.
This can be useful for public or shared mailboxes, where
some users should be able to listen to messages but not
delete them.
ASTERISK-30063 #close
Change-Id: Icdfb8423ae8d1fce65a056b603eb84a672e80a26
An m option to Park and ParkAndAnnounce now allows
specifying a music on hold class override.
ASTERISK-30087
Change-Id: I03de8d97b100e451b2611b5a621d48750f5d6a9e
Agi commnad exec can now evaluate dialplan functions and
variables if variable AGIEXECFULL is set to yes. this can
be useful when executing Playback or Read from agi.
ASTERISK-30058 #close
Change-Id: I669991f540496e7bddd096fec82b52c083036832
This change exposes the channel driver's unique id (i.e. the Call-ID
for chan_sip/chan_pjsip based channels) to ARI channel resources
as `protocol_id`.
ASTERISK-30027
Reported by: Moritz Fain
Tested by: Moritz Fain
Change-Id: I7cc6e7a9d29efe74bc27811d788dac20fe559b87
Adds the CONFBRIDGE_CHANNELS function which can be used
to retrieve a comma-separated list of channels, filtered
by a particular type of participant category. This output
can then be used with functions like UNSHIFT, SHIFT, POP,
etc.
ASTERISK-30036 #close
Change-Id: I1950aff932437476dc1abab6f47fb4ac90520b83
Added the hear_own_join_sound option to the confbridge user profile to
control who hears the sound_join audio file. When set to 'yes' the user
entering the conference and the participants already in the conference
will hear the sound_join audio file. When set to 'no' the user entering
the conference will not hear the sound_join audio file, but the
participants already in the conference will hear the sound_join audio
file.
ASTERISK-29931
Added by Michael Cargile
Change-Id: I856bd66dc0dfa057323860a6418c1371d249abd2
Currently, if any custom ring cadences are specified, they are
appended to the array of cadences from wherever we left off
last time. This works properly the first time, but on subsequent
dahdi restarts, it means that the existing cadences are left
alone and (most likely) the same cadences are then re-added
afterwards. In short order, the cadence array gets maxed out
and the user begins seeing warnings that the array is full
and no more cadences may be added.
This buggy behavior persists until Asterisk is completely
restarted; however, if and when dahdi restart is run again,
then the same problem is reintroduced.
This fixes this behavior so that cadence parsing is more
idempotent, that is so running dahdi restart multiple times
starts adding cadences from the beginning, rather than from
wherever the last cadence was added.
As before, it is still not possible to revert to the default
cadences by simply removing all cadences in this manner, nor
is it possible to delete existing cadences. However, this
does make it possible to update existing cadences, which
was not possible before, and also ensures that the cadences
remain unchanged if the config remains unchanged.
ASTERISK-29990 #close
Change-Id: Ie32ea3e8a243b766756b1afce684d4a31ee7421d
Some command line options to Asterisk only apply when Asterisk
is started and cannot be used with remote console mode. If a
user tries to use any of these, they are currently simply
silently ignored.
This prints out a warning if incompatible options are used,
informing users that an option used cannot be used with remote
console mode. Additionally, some clarifications are added to
the help text and man page.
ASTERISK-22246
ASTERISK-26582
Change-Id: I980a5380ef2c19e8ea348596396d5382893c4337
Adds the DB_KEYCOUNT function, which can be used to retrieve
the number of keys at a given prefix in AstDB.
ASTERISK-29968 #close
Change-Id: Ib2393b77b7e962dbaae6192f8576bc3f6ba92d09
If Asterisk receives a SIP REFER with Session-Timers UAC
maintain Session-Timers when sending UPDATE"
ASTERISK-29843
Change-Id: I8e9a21c13bf757fa34d778f49ba3cf859b29ae5c
This adds the EVAL_EXTEN function, which may be used to retrieve
the variable-substituted data at any extension.
ASTERISK-29486
Change-Id: Iad81019689674c9f4ac77d235f5d7234adbb1432
PJSIP currently is capable of receiving flash events
and converting them to FLASH control frames, but it
currently lacks support for doing the reverse: taking
a FLASH control frame and converting it into a flash
event in the SIP domain.
This adds the ability for PJSIP to process flash control
frames by converting them into the appropriate SIP INFO
message, which can then be sent to the peer. This allows,
for example, flash events to be sent between Asterisk
systems using PJSIP.
ASTERISK-29941 #close
Change-Id: I1590221a4d238597f79672fa5825dd4a920c94dd
Adds the dialplan eval function commands to evaluate a dialplan
function from the CLI. The return value and function result are
printed out and can be used for testing or debugging.
ASTERISK-29820 #close
Change-Id: I833e97ea54c49336aca145330a2adeebfad05209
added new global config option "allow_sending_180_after_183"
that if enabled will preserve 180 after a 183
ASTERISK-29842
Change-Id: I8a53f8c35595b6d16d8e86e241b5f110d92f3d18
The async_operations setting on a transport configures how
many simultaneous incoming packets the transport can handle
when multiple threads are polling and waiting on the transport.
As we only use a single thread this was needlessly creating
incoming packets when set to a non-default value, wasting memory.
ASTERISK-30006
Change-Id: I1915973ef352862dc2852a6ba4cfce2ed536e68f
Some databases depending on their configuration using backslashes
for escaping. When combined with the use of ' this can result in
a broken func_odbc query.
This change adds a SQL_ESC_BACKSLASHES dialplan function which can
be used to escape the backslashes.
This is done as a dialplan function instead of being always done
as some databases do not require this, and always doing it would
result in incorrect data being put into the database.
ASTERISK-29838
Change-Id: I152bf34899b96ddb09cca3e767254d8d78f0c83d
Adds the m option to the Queue application, which allows a
music on hold class to be specified at runtime which will
override the class configured in queues.conf.
This option functions like the m option to Dial.
ASTERISK-29876 #close
Change-Id: Ie25a48569cf8755c305c9438b1ed292c3adcf8d7
Several modules removal and deprecations occurred in 19.0.0 (initial
19 release), but associated UPGRADE files were not removed from
staging for some reason in the master branch.
This patch removes those files, and also removes a spurious leftover
header, chan_phone.h (associated module removed in 19).
Change-Id: Ib92142c846b45c882d6b2b6caca7225253c83add
This patch makes the Resource List Subscriptions (RLS) dynamic.
The asterisk updates the current subscriptions to reflect the changes
to the list on the subscriptions refresh. If list items are added,
removed, updated or do not exist anymore, the asterisk regenerates
the resource list.
ASTERISK-29906 #close
Change-Id: Icee8c00459a7aaa43c643d77ce6f16fb7ab037d3
This adds a new AMI action called QueueWithdrawCaller.
This AMI action makes it possible to withdraw a caller from a queue,
in a safe and a generic manner.
This can be useful for retrieving a specific call and
dispatching it to a specific extension.
It works by signaling the caller to exit the queue application
whenever it can. Therefore, it is not guaranteed
that the call will leave the queue.
ASTERISK-29909 #close
Change-Id: Ic15aa238e23b2884abdcaadff2fda7679e29b7ec
Adds the lastcontext and lastexten channel fields to allow users
to access previous dialplan execution locations.
ASTERISK-29840 #close
Change-Id: Ib455fe300cc8e9a127686896ee2d0bd11e900307
Adds the since tag to the documentation DTD so
that individual applications, functions, etc.
can now specify when they were added to Asterisk.
This tag is added at the individual application,
function, etc. level as opposed to at the module
level because modules can expand over time as new
functionality is added, and granularity only
to the module level would generally not be useful.
This enables the ability to more easily determine
when new functionality was added to Asterisk, down
to minor version as opposed to just by major version.
This makes it easier for users to write more portable
dialplan if desired to not use functionality that may
not be widely available yet.
ASTERISK-29896 #close
Change-Id: Ibbb35c702d8038bdc3fd0a944fbfa69384cc15d5
Whereas BLFs allow to show a display name for each RLS entry,
the asterisk provides only the extension now.
This is not end user friendly.
This commit adds a new resource_list option, resource_display_name,
to indicate whether display name of resource or the resource name being
provided for RLS entries.
If this option is enabled, the Display Name will be provided.
This option is disabled by default to remain the previous behavior.
If the 'event' set to 'presence' or 'dialog' the non-empty HINT name
will be set as the Display Name.
The 'message-summary' is not supported yet.
ASTERISK-29891 #close
Change-Id: Ic5306bd5a7c73d03f5477fe235e9b0f41c69c681
Adds an option to the ReceiveMF application to allow specifying a
maximum number of digits.
Originally, this capability was not added to ReceiveMF as it was
with ReceiveSF because typically a ST digit is used to denote that
sending of digits is complete. However, there are certain signaling
protocols which simply transmit a digit (such as Expanded In-Band
Signaling) and for these, it's necessary to be able to read a
certain number of digits, as opposed to until receiving a ST digit.
This capability is added as an option, as opposed to as a parameter,
to remain compatible with existing usage (and not shift the
parameters).
ASTERISK-29877 #close
Change-Id: I4229167c9aa69b87402c3c2a9065bd8dfa973a0b
The disabledevents setting has been added to the general section
in manager.conf, which allows users to specify events that
should be globally disabled and not sent to any AMI listeners.
This allows for processing of these AMI events to end sooner and,
for frequent AMI events such as Newexten which users may not have
any need for, allows them to not be processed. Additionally, it also
cleans up core debug as previously when debug was 3 or higher,
the debug was constantly spammed by "Analyzing AMI event" messages
along with a complete dump of the event contents (often for Newexten).
ASTERISK-29853 #close
Change-Id: Id42b9a3722a1f460d745cad1ebc47c537fd4f205
There are a lot of Queue AMI actions and Queue applications
which do not load queue and queue members from Realtime.
AMI actions
QueuePause - if queue not in memory - response "Interface not found".
QueueStatus/QueueSummary - if queue not in memory - empty response.
Applications:
PauseQueueMember - if queue not in memory
Attempt to pause interface %s, not found
UnpauseQueueMember - if queue not in memory
Attempt to unpause interface xxxxx, not found
This patch adds a new function load_realtime_queues
which loads queue and queue members for desired queue
or all queues and all members if param 'queuename' is NULL or empty.
Calls the function load_realtime_queues when needed.
Also this patch fixes leak of ast_config in function set_member_value.
Also this patch fixes incorrect LOG_WARNING when pausing/unpausing
already paused/unpaused member.
The function ast_update_realtime returns 0 when no record modified.
So 0 is not an error to warn about.
ASTERISK-29873 #close
ASTERISK-18416 #close
ASTERISK-27597 #close
Change-Id: I554ee0eebde93bd8f49df7f84b74acb21edcb99c
The XML Manager Event Interface (amxml) now generates attribute names
that are compliant with the XML 1.1 specification. Previously, an
attribute name that started with a digit would be rendered as-is, even
though attribute names must not begin with a digit. We now prefix
attribute names that start with a digit with an underscore ('_') to
prevent XML validation failures.
This is not backwards compatible but my assumption is that compliant
XML parsers would already have been complaining about this.
ASTERISK-29886 #close
Change-Id: Icfaa56a131a082d803e9b7db5093806d455a0523
Adds a new option, defaultenabled, to the CDR core to
control whether or not CDR is enabled on a newly created
channel. This allows CDR to be disabled by default on
new channels and require the user to explicitly enable
CDR if desired. Existing behavior remains unchanged.
ASTERISK-29808 #close
Change-Id: Ibb78c11974bda229bbb7004b64761980e0b2c6d1
if holdtime is (0 min, 0 sec) there is no hold time announcements
we should then also not playing queue-thankyou
ASTERISK-29831
Change-Id: Ic7e51dcde526b23f1cd8d24e1d1e2d81e10f9d2c
There are times when you need to troubleshoot issues with bundled
pjproject or add new features that need to be pushed upstream
but...
* The source directory created by extracting the pjproject tarball
is not scanned for code changes so you have to keep forcing
rebuilds.
* The source directory isn't a git repo so you can't easily create
patches, do git bisects, etc.
* Accidentally doing a make distclean will ruin your day by wiping
out the source directory, and your changes.
* etc.
This commit makes that easier.
See third-party/pjproject/README-hacking.md for the details.
ASTERISK-29824
Change-Id: Idb1251040affdab31d27cd272dda68676da9b268
adding support for playing the correct en/et for nordic languages
by adding 'n' for neuter gender in the relevant ast_say_number
ASTERISK-29827
Change-Id: I03ebc827d2f0dc95132ab2f42799893c70edc5b1
Adds a command to the CLI to unload and then
load a module. This makes it easier to perform
these operations which are often done
subsequently to load a new version of a module.
"module reload" already refers to reloading of
configuration, so the name "refresh" is chosen
instead.
ASTERISK-29807 #close
Change-Id: I595f6f11774a0de2565a1fba38da22309ce93a2c
added that we set DIALEDPEERNUMBER on the outgoing channels
so it is avalible in b(content^extension^line)
this add the same behaviour as Dial
ASTERISK-29795
Change-Id: Icbc589ea2066f0c401a892bf478f6b2fd44e62f6
added support for playing the correct plural sound file
dependen on where you have 1 or multipe messages
based on the existing SE/NO code
ASTERISK-29797
Change-Id: I88aa814d02f3772bb80b474204b1ffb26fe438c2
Adds a ReceiveText application that can be used in
conjunction with SendText. Currently, there is no
way in Asterisk to receive text in the dialplan
(or anywhere else, really). This allows for Asterisk
to be the recipient of text instead of just the sender.
ASTERISK-29759 #close
Change-Id: Ica2c354a42bff69f323a0493d3a7cd0fb129d52d
Adds the JSON_DECODE function for parsing JSON in the
dialplan. JSON parsing already exists in the Asterisk
core and is used for many different things. This
function exposes the basic parsing capability to
the user in the dialplan, for instance, in conjunction
with CURL for using API responses.
ASTERISK-29706 #close
Change-Id: Iea60c49a7358dfdc2db60803cdc9a742f808ba2c
Adds tech-agnostic support for MF signaling by adding
MF sender and receiver applications as well as Dial
integration.
ASTERISK-29496-mf #do-not-close
Change-Id: I61962b359b8ec4cfd05df877ddf9f5b8f71927a4
Otherwise, the value 'false' was not found in the enumerated set of
the XML DTD for the XML attribute 'required' in the XML element
'parameter'. Therefore, DTD validation of the runtime XML failed.
ASTERISK-29790
Change-Id: Id13f230ad65a70dd8c2e3ae9ac85d1e841aed03e
In developer mode, use internal documentation as well.
This should produce no warnings. Fix yours!
In noisy mode, output all possible warnings of Doxygen.
This creates zillion of warnings. Double-check your current module!
Any warnings are in the file './doxygen.log'. Beside that, this change
avoids deprecated parameters because the configuration file for Doxygen
contains only those parameters which differ from the default. This
avoids the need to update the file on each run. Furthermore, it adds
AST_VECTOR to be expanded. Finally, the default name for that file is
Doxyfile. Therefore, let us use that!
ASTERISK-26991
ASTERISK-20259
Change-Id: I4129092a199d5e24c319a09cd088614b121015af
Newer versions of spandsp did refactoring of code to add new features
like color FAXing. This refactoring broke backwards compatibility.
Add support for the new version while retaining support for 0.0.6.
ASTERISK-29729 #close
Change-Id: I3bd74550604ebcf0304528d647fa39abc62fbaa1
Makes basic call progress tone detection available
in a tech-agnostic manner with the addition of the
ToneScan application. This can determine if the channel
has encountered a busy signal, SIT tones, dial tone,
modem, fax machine, etc. A few basic async progress
tone detect options are also added to the TONE_DETECT
function.
ASTERISK-29720 #close
Change-Id: Ia02437e0450473031e294798b8cb421fb8f24e90
Historically, the dial syntax for IAX2 has held that
an outkey (used only for RSA authenticated calls)
and a secret (used only for plain text and MD5 authenticated
calls, historically) were mutually exclusive, and thus
the same position in the dial string was used for both
values.
Now that encryption is possible with RSA authentication,
this poses a limitation, since encryption requires a
secret and RSA authentication requires an outkey. Thus,
the dial syntax is extended so that both a secret and
an outkey can be specified.
The new extended syntax is backwards compatible with the
old syntax. However, a secret can now be specified after
the outkey, or the outkey can be specified after the secret.
This makes it possible to spawn an encrypted RSA authenticated
call without a corresponding peer being predefined in iax.conf.
ASTERISK-29707 #close
Change-Id: I1f8149313ed760169d604afbb07720a8b07dd00e
The search for a running asterisk when --running is used
has been greatly simplified and in the event it doesn't
work, you can now specify a pid to use on the command
line with --pid.
The search for asterisk modules when --tarball-coredumps
is used has been enhanced to have a better chance of finding
them and in the event it doesn't work, you can now specify
--libdir on the command line to indicate the library directory
where they were installed.
The DATEFORMAT variable was renamed to DATEOPTS and is now
passed to the 'date' utility rather than running DATEFORMAT
as a command.
The coredump and output files are now renamed with DATEOPTS.
This can be disabled by specifying --no-rename.
Several confusing and conflicting options were removed:
--append-coredumps
--conffile
--no-default-search
--tarball-uniqueid
The script was re-structured to make it easier for follow.
Change-Id: I674be64bdde3ef310b6a551d4911c3b600ffee59
The stir_shaken configuration option now has 4 different choices to pick
from: off, attest, verify, and on. Off and on behave the same way they
do now. Attest will only perform attestation on the endpoint, and verify
will only perform verification on the endpoint.
Certain responses are required to be sent based on certain conditions
for STIR/SHAKEN. For example, if we get a Date header that is outside of
the time range that is considered valid, a 403 Stale Date response
should be sent. This and several other responses have been added.
Change-Id: I4ac1ecf652cd0e336006b0ca638dc826b5b1ebf7
Add a time_t logintime to storage a time when a member is added into a
queue.
Also, includes show this time (in seconds) using a 'queue show' command
and the field LoginTime for response for AMI events.
ASTERISK-18069 #close
Change-Id: Ied6c3a300f78d78eebedeb3e16a1520fc3fff190
I am adding a mix option that will play by filename and say.conf unlike
say option that will only play with say.conf. It
will look on the format of the name, if it is like say it play with
say.conf if not it will play the file name.
ASTERISK-29662
Change-Id: I815816916a308f0fa8f165140dc15772dcbd547a
Adds support for encryption to RSA-authenticated
calls. Also prevents crashes if an RSA IAX2 call
is initiated to a switch requiring encryption
but no secret is provided.
ASTERISK-20219
Change-Id: I18f1f9d7c59b4f9cffa00f3b94a4c875846efd40
In res_pjsip_sdp_rtp, the bind_rtp_to_media_address option and the
fallback use of the transport's bind address solve problems sending
media on systems that cannot send ipv4 packets on ipv6 sockets, and
certain other situations. This change extends both of these behaviors
to UDPTL sessions as well in res_pjsip_t38, to fix fax-specific
problems on these systems, introducing a new option
endpoint/t38_bind_udptl_to_media_address.
ASTERISK-29402
Change-Id: I87220c0e9cdd2fe9d156846cb906debe08c63557
The behavior of max_contacts and remove_existing are connected. If
remove_existing is enabled, the soonest expiring contacts are removed.
This may occur when there is an unavailable contact. Similarly,
when remove_existing is not enabled, registrations from good
endpoints are rejected in favor of retaining unavailable contacts.
This commit adds a new AOR option remove_unavailable, and the effect
of this setting will depend on remove_existing. If remove_existing
is set to no, we will still remove unavailable contacts when they
exceed max_contacts, if there are any. If remove_existing is set to
yes, we will prioritize the removal of unavailable contacts before
those that are expiring soonest.
ASTERISK-29525
Change-Id: Ia2711b08f2b4d1177411b1be23e970d7fdff5784
The MessageSend AMI action has been updated to allow the Destination
and the To addresses to be provided separately. This brings the
MessageSend manager command in line with the capabilities of the
MessageSend dialplan application.
ASTERISK-29663 #close
Change-Id: I8513168d3e189a9fed88aaab6f5547ccb50d332c
Adds a function to check for the existence of a channel by
name or by UNIQUEID.
ASTERISK-29656 #close
Change-Id: Ib464e9eb6e13dc683a846286798fecff4fd943cb
Adds the ability for users to log to custom log levels
by providing custom log level names in logger.conf. Also
adds a logger show levels CLI command.
ASTERISK-29529
Change-Id: If082703cf81a436ae5a565c75225fa8c0554b702
Adds a SendMF application and PlayMF manager
event to send arbitrary R1 MF tones on the
current or specified channel.
ASTERISK-29496
Change-Id: I5d89afdbccee3f86cc702ed96d882f3d351327a4
Adds the STRBETWEEN function, which can be used to insert a
substring between each character in a string. For instance,
this can be used to insert pauses between DTMF tones in a
string of digits.
ASTERISK-29627
Change-Id: Ice23009d4a8e9bb9718d2b2301d405567087d258
Adds the DIRNAME and BASENAME functions, which are
wrappers around the corresponding C library functions.
These can be used to safely and conveniently work with
file paths and names in the dialplan.
ASTERISK-29628 #close
Change-Id: Id3aeb907f65c0ff96b6e57751ff0cb49d61db7f3
Up until now, all of the logic used to translate
arguments to the Say applications has been
directly coupled to playback, preventing other
modules from using this logic.
This refactors code in say.c and adds a SAYFILES
function that can be used to retrieve the file
names that would be played. These can then be
used in other applications or for other purposes.
Additionally, a SayMoney application and a SayOrdinal
application are added. Both SayOrdinal and SayNumber
are also expanded to support integers greater than
one billion.
ASTERISK-29531
Change-Id: If9718c89353b8e153d84add3cc4637b79585db19
dsp.c contains arbitrary tone detection functionality
which is currently only used for fax tone recognition.
This change makes this functionality publicly
accessible so that other modules can take advantage
of this.
Additionally, a WaitForTone and TONE_DETECT app and
function are included to allow users to do their
own tone detection operations in the dialplan.
ASTERISK-29546
Change-Id: Ie38c395000f4fd4d04e942e8658e177f8f499b26
There is an option to silence voicemail instructions but it does not
take into consideration if a recorded greeting exists or not. Add a
new 'S' option that does that.
ASTERISK-29632 #close
Change-Id: I03f2f043a9beb9d99deab302247e2a8686066fb4
Adds an information element for ANI2 so that
Originating Line Information can be transmitted
over IAX2 channels.
ASTERISK-29605 #close
Change-Id: Iaeacdf6ccde18eaff7f776a0f49fee87dcb549d2
Allows for the digit # to be read as a digit,
just like any other DTMF digit, as opposed to
forcing it to be used as an end of input
indicator. The default behavior remains
unchanged.
ASTERISK-18454 #close
Change-Id: I3033432adb9d296ad227e76b540b8b4a2417665b
This allows the STUN server to change its IP address without having to
reload the res_rtp_asterisk module.
The refresh of the name resolution occurs first when the module is
loaded, then recurringly, slightly after the previous DNS answer TTL
expires.
ASTERISK-29508 #close
Change-Id: I7955a046293f913ba121bbd82153b04439e3465f
Prevents reloads of app_queue from also resetting
queue statistics.
Also preserves individual queue agent statistics
if we're just reloading members.
ASTERISK-28701
Change-Id: Ib5d4cdec175e44de38ef0f6ede4a7701751766f1
Allow mapping pjproject log messages to the Asterisk TRACE
log level. The defaults were also changes to log pjproject
levels 3,4 to DEBUG and 5,6 to TRACE. Previously 3,4,5,6
all went to DEBUG.
ASTERISK-29582
Change-Id: I859a37a8dec263ed68099709cfbd3e665324c72d
Henning Westerholt
Naveen Albert
Maximilian Fridrich
Naveen Albert
Mike Bradeen
sungtae kim
Philip Prindeville
George Joseph
Joshua C. Colp
Asterisk Development Team
Jose Lopes
Kevin Harwell
Shloime Rosenblum
Moritz Fain
Michael Cargile
Mark Petersen
Alexei Gradinari
Kfir Itzhak
Sean Bright
Alexander Traud
Dustin Marquess
Josh Soref
Ben Ford
Rodrigo Ramírez Norambuena
Matthew Kern
Joseph Nadiv
Sebastien Duthil