We previously allowed resample and g711 codecs to be built when
TEST_FRAMEWORK was enabled. This could cause errors if the testsuite
was run without this option enabled. Switch the build system to allow
those codecs to be built when --enable-dev-mode is used. This removes a
chance for strange testsuite errors from use of an inadequate pjsua
binary.
Change-Id: Iee8a3613cdb711fa7e7d217c5a775a575907ae22
pack_string crashed on non-NULL strings returned when s->has_error was
true if the string was the result of 's' format without '#', '%' or '+'.
Change-Id: Ic125df691d81ba2cbc413e37bdae657b304d20d0
This change implements a few different generic things which were brought
on by Google Voice SIP.
1. The concept of flow transports have been introduced. These are
configurable transports in pjsip.conf which can be used to reference a
flow of signaling to a target. These have runtime configuration that can
be changed by the signaling itself (such as Service-Routes and
P-Preferred-Identity). When used these guarantee an individual connection
(in the case of TCP or TLS) even if multiple flow transports exist to the
same target.
2. Service-Routes (RFC 3608) support has been added to the outbound
registration module which when received will be stored on the flow
transport and used for requests referencing it.
3. P-Associated-URI / P-Preferred-Identity (RFC 3325) support has been
added to the outbound registration module. If a P-Associated-URI header
is received it will be used on requests as the P-Preferred-Identity.
4. Configurable outbound extension support has been added to the outbound
registration module. When set the extension will be placed in the
Supported header.
5. Header parameters can now be configured on an outbound registration
which will be placed in the Contact header.
6. Google specific OAuth / Bearer token authentication
(draft-ietf-sipcore-sip-authn-02) has been added to the outbound
registration module.
All functionality changes are controlled by pjsip.conf configuration
options and do not affect non-configured pjsip endpoints otherwise.
ASTERISK-27971 #close
Change-Id: Id214c2d1c550a41fcf564b7df8f3da7be565bd58
This patch is not in the upstream pjproject and does unsafe things with
the timer->_timer_id and timer->_grp_lock values in pj_timer_entry_reset()
outside of the timer heap lock. pj_timer_entry_reset() is also called for
timers that are not about to be rescheduled in a few places.
Change-Id: I4fe0b4bc648f7be5903cf4531b94fc87275713c1
Use json_vsprintf from versions which contain fix for va_copy leak.
Apply fixes from jansson master:
* va_copy leak fix.
* Avoid potential invalid memory read in json_pack.
* Rename variable that shadowed another.
Change-Id: I7522e462d2a52f53010ffa1e7d705c666ec35539
When writing an RTCP report to json the code attempts to pack the "ssrc" and
"source_ssrc" unsigned integer values as a signed int value type. This of course
means if the ssrc's unsigned value is greater than that which can fit into a
signed integer value it gets converted to a negative number. Subsequently, the
negative value goes out in the json report.
This patch now packs the value as a json_int_t, which is the widest integer type
available on a given system. This should make it so the value no longer
overflows.
Note, this was caught by two failing tests hep/rtcp-receiver/ and
hep/rtcp-sender.
Change-Id: I2af275286ee5e795b79f0c3d450d9e4b28e958b0
This change brings in PJSIP 2.8, removes all the patches
that were merged upstream, and makes a minor change to
support a breaking change that was done.
ASTERISK-28059
Change-Id: I5097772b11b0f95c3c1f52df6400158666f0a189
If Asterisk is built using a DESTDIR this will cause the bundled jansson
to be installed to an unexpected location and we will fail to find it.
Change-Id: Id033e2813261e0d45232383d44c6391122169548
The authors of PJProject undef s_addr because of some issue in Microsoft
Windows. However in Oracle Solaris, s_addr is not a structure member, but
defined to map to the real structure member.
Updates the patch from ASTERISK_20366
ASTERISK-27997
Change-Id: I8223026d4d54e2a46521085fcc94bfa6ebe35b11
The script configure from Teluu expects shared libraries (.so) in a subfolder
called 'lib', when --with-xyz=PATH is specified. However for OpenSSL, the
default location is the root of the source folder = PATH. Furthermore, Asterisk
supports both, 'lib' and root. For consistency and because Asterisk is using
(only) OpenSSL in PJProject, it is enhanced to support both locations, just
like Asterisk.
ASTERISK-27995
Change-Id: I8eb916a88b6b8c22e29bb40bee8faaca6c73406f
The tdata containing the response can be shared by both the dialog
object and the tsx object. In order to prevent the race condition
between the tsx retransmission and the dialog sending a response,
clone the tdata before modifying it for the dialog send response.
ASTERISK-27966 #close
Change-Id: Ic381004a3a212fe1d8eca0e707fe09dba4a6ab4e
Changing any Menuselect option in the `Compiler Flags` section causes a
full rebuild of the Asterisk source tree. Every enabled option causes
a #define to be added to buildopts.h, thus breaking ccache caching for
every source file that includes "asterisk.h". In most cases each option
only applies to one or two files. Now we only define those options for
the specific sources which use them, this causes much better cache
matching when working with multiple builds. For example testing code
with an without MALLOC_DEBUG will now use just over half the ccache
size, only main/astmm.o will have two builds cached instead of every
file.
Reorder main/Makefile so _ASTCFLAGS set on specific object files are all
together, sorted by filename. Stop adding -DMALLOC_DEBUG to CFLAGS of
bundled pjproject, this define is no longer used by any header so only
serves to break cache.
The only code change is a slight adjustment to how main/astmm.c is
initialized. Initialization functions always exist so main/asterisk.c
can call them unconditionally. Additionally rename the astmm
initialization functions so they are not exported.
Change-Id: Ie2085237a964f6e1e6fff55ed046e2afff83c027
Update the bundled jansson Makefile to do nothing during Asterisk
install, use a target that is not phony to initiate the jansson make and
install.
Change-Id: I7643cc3d39af9feba8fc0da676b646efc5f8b3bb
Previously, Asterisk did not tell its bundled PJProject about this configure
parameter. Therefore, PJProject used the platform provided OpenSSL always.
ASTERISK-27880
Change-Id: Iea545aec854dd0e2c061c69bb118a76ce56c5dc6
Asterisk patched the pjproject source to avoid crashing when pjproject
sip_msg headers are encountered with NULL vptr's, but the patch also
output error messages for some valid headers which simply did not need
to be added to the message itself, such as hidden route headers.
pjproject has since applied a similar patch to their baseline to avoid
crashes, but their version also avoids the spurious error logging.
Lets use their patch instead.
ASTERISK-27961 #close
Change-Id: I2ddbd82c8da10e0dcc9807a48089d1f3c2d6e389
Asterisk modules that use PJPROJECT services have their compiler
optimization and possibly their symbolic debug options overridden by the
PJPROJECT configure script selected settings.
* We need to filter-out any -O and -g options in PJ_CFLAGS before echoing
out the result so the PJPROJECT_INCLUDE variable does not override the
Asterisk module settings when using bundled PJPROJECT.
NOTE: This patch only has an effect when using bundled PJPROJECT.
ASTERISK-27563
Change-Id: If124169735ecf572ad1535cd43bff94cb44d5b30
Turn off the periodic sending of CRLNCRLN. Default is on (90 seconds),
which conflicts with the global section's keep_alive_interval option in
pjsip.conf.
patches:
pjsip_keep_not_alive.patch submitted by Alexander Traud (License 6520)
ASTERISK-27347
Change-Id: I6a197f56e1830d3b7e5ec70f17025840a290b057
pjproject by default currently will follow media forked during an INVITE
on outbound calls if the To tag is different on a subsequent response as
that on an earlier response. We handle this correctly. There have
been reported cases where the To tag is the same but we still need to
follow the media. The pjproject patch in this commit adds the
capability to sip_inv and also adds the capability to control it at
runtime. The original "different tag" behavior was always controllable
at runtime but we never did anything with it and left it to default to
TRUE.
So, along with the pjproject patch, this commit adds options to both the
system and endpoint objects to control the two behaviors, and a small
logic change to session_inv_on_media_update in res_pjsip_session to
control the behavior at the endpoint level.
The default behavior for "different tags" remains the same at TRUE and
the default for "same tag" is FALSE.
Change-Id: I64d071942b79adb2f0a4e13137389b19404fe3d6
ASTERISK-27936
Reported-by: Ross Beer
There have been cases that when the transaction timer callback is called
the tsx is already destroyed. This causes a crash. We now check the
tsx state and return if the tsx is already destroyed.
Change-Id: If93acd5e48d9ca5bb553f2405d5afc836842fe1c
Added a new pj_timer_entry_reset function that resets a timer_entry
for re-use.
Changed direct settings of timer_entry fields to use
pj_timer_entry_init and pj_timer_entry_reset.
Fixed issues where timers were being rescheduled incorrectly.
Change-Id: I5b624bfbc5c1429117484b9b24567293002148e6
There have been some crashes in the past where something attempts
to use a pj_atomic after it's already been destroyed. This patch
tries to prevent it by making sure that pj_atomic_destroy sets
its mutex to NULL when it's done. The pj_mutex functions already check
for a NULL mutex and just return PJ_EINVAL.
Teluu also added some checks to the win32 implementation as well.
Change-Id: Id25f70b79fdedf44ead6e6e1763a4417d3b3f825
./configure --with-pjproject-bundled
did not display an explanation, when no download utility like wget, curl, or
fetch was installed beforehand, although an explanation existed in code. This
happened because the code expected the variable DOWNLOAD_TO_STDOUT to be empty.
However, the script ./configure set that variable always.
Change-Id: I64c99b76a03525c69471e5055bf124b36a51bbd4
This replaces AST_INLINE_API allocators in utils.h with real functions
implemented in astmm.c. Associated macro's are also moved from utils.h
to astmm.h.
Remove menuselect conflicts between MALLOC_DEBUG and DEBUG_CHAOS as they
can now be combined.
This has multiple benefits:
* Simplifies asterisk/utils.h by removing inline functions and use of
the logger.
* Removal of these inline functions decreases size of Asterisk and
module binaries by 1% or more.
* Puts memory management functions together with and without
MALLOC_DEBUG enabled, simplifying management of the code.
* Enables DEBUG_CHAOS for ASTMM_REDIRECT and bundled pjproject.
Change-Id: If9df4377f74bdbb627461b27a473123e05525887
This allows asterisk to be compiled with MALLOC_DEBUG to load modules
built without MALLOC_DEBUG. Now pre-compiled third-party modules will
still work regardless of MALLOC_DEBUG being enabled or not.
Change-Id: Ic07ad80b2c2df894db984cf27b16a69383ce0e10
pjproject's fmtp retrieval function failed to catch invalid fmtp attributes.
Because of this Asterisk would crash if given an SDP with an invalid fmtp
attribute.
When retrieving the format this patch now makes sure the fmtp attribute is
available. If not available it now returns an error status.
ASTERISK-27583 #close
Change-Id: I5cebe000ce2d846cae3af33b6d72c416e51caf2f
pjproject's media format parsing algorithm failed to catch invalid values.
Because of this Asterisk would crash if given an SDP with a invalid media
format description.
When parsing the media format description this patch now properly parses the
value and returns an error status if it can't successfully parse/convert the
value.
ASTERISK-27582 #close
Change-Id: I883b3a4ef85b6972397f7b56bf46c5779c55fdd6
When <http://github.com/BelledonneCommunications/bcg729> is installed, PJProject
tries to link that. Support for this bcg729 was added with PJProject 2.7. The
issue happens, because Teluu enabled that new feature on default.
ASTERISK-27584
Reported by: Stuart Henderson
Change-Id: I88b6b18ad777bcfe2d8201187b4b90eec0a172a6
We still need to figure out how a bad header is getting into the
outgoing message but this patch to pjproject prevents attempting
to print that header and causing a crash.
For several users, this crash happens when sending 183 progress
messages.
ASTERISK-26832
Reported by: Ross Beer, Jan Rozhon
Change-Id: Ie5c5a921c890c843587763e7f33f987dfe66bd16
When an older GCC version is called with a too new warning option, GCC exited
with an error and Asterisk was not built. Therefore, the configure script tests
the installed compiler whether it supports that warning option. If not, Asterisk
does not pass it to the installed compiler. However, some compilers (like clang)
do not exit (error) but give just a warning in such a case. Because the compiler
did not exit, Asterisk passed the unknown-warning option.
ASTERISK-27560
Change-Id: Ia9d148e689c173df4e91699113605dab2de36038
When we fail over to a new target we create a new transaction
and it becomes the current INVITE transaction. This does not
prevent the previous transaction from raising state changes
and causing the session to be prematurely disconnected if a
transport error occurs immediately.
This change backports a fix from PJSIP that eliminates the
incorrect state change and reduces when they would be raised
in the first place.
ASTERISK-27408
Change-Id: Id22d087591782eee31311753d11e7eca4b95ef34
The definition in config_site.h and the argument to the
configure script are not necessary to disable WebRTC
support. The correct argument, --disable-libwebrtc, is
already passed.
ASTERISK-26980
Change-Id: I27da2c894f87914956a72710222e17462d8a44bc
If a 183 with sdp response is receive without a To tag the sdp is not
negotiated. According to RFC 3261 section 12.1.2 while a To tag is required,
the client needs to still be able to handle the missing tag case for
backwards compatibility.
This patch, accepted by and applied to pjproject, makes it so if an incoming
180/183 with SDP comes in without a To tag it gets appropriately handled.
ASTERISK-27442 #close
Change-Id: Ic9d6b01e05e8f4874eebbd7adfe05d932025d203
OSX does not support 'readlink -f' or 'sed -r'. Replace readlink with
the GNU make macro 'realpath'. Replace sed with grep in one place, cut
in the other.
ASTERISK-27332
Change-Id: I5d34ecca905384decb22ead45c913ae5e8aff748
The default return code for pjsip_find_msg was PJ_SUCCESS so if
a Content-Length header wasn't found at all, pjsip_find_msg was
returning PJ_SUCCESS instead of PJSIP_EMISSINGHDR.
Also added the volatile keyword to a few variables that are used
both inside and outside the PJ_TRY/PJ_CATCH block.
Partial fix for ASTERISK_27408
Change-Id: If82ba9de921e3d57df9c68cf96ee45ccc1491f7a
Update from 2.7 to 2.7.1 for bundled pjproject. Changed version
and removed patch files included in the update.
Change-Id: I55cea8e734b318c2df9daf86aa0802c559ec8357
If a transport is created with the same transport type, source
IP address, and source port as one that already exists the old
transport is moved into a linked list called "tp_list".
If this old transport is later shutdown it will not be destroyed
as the process checks whether the transport is valid or not. This
check does not look at the "tp_list" when making the determination
causing the transport to not be destroyed.
This change updates the logic to query not just the main storage
method for transports but also the "tp_list".
Upstream issue https://trac.pjsip.org/repos/ticket/2061
ASTERISK-27411
Change-Id: Ic5c2bb60226df0ef1c8851359ed8d4cd64469429
Parsing the numeric header fields like cseq, ttl, port, etc. all
had the potential to overflow, either causing unintended values to
be captured or, if the values were subsequently converted back to
strings, a buffer overrun. To address this, new "strto" functions
have been created that do range checking and those functions are
used wherever possible in the parser.
* Created pjlib/include/limits.h and pjlib/include/compat/limits.h
to either include the system limits.h or define common numeric
limits if there is no system limits.h.
* Created strto*_validate functions in sip_parser that take bounds
and on failure call the on_str_parse_error function which prints
an error message and calls PJ_THROW.
* Updated sip_parser to validate the numeric fields.
* Fixed an issue in sip_transport that prevented error messages
from being properly displayed.
* Added "volatile" to some variables referenced in PJ_CATCH blocks
as the optimizer was sometimes optimizing them away.
* Fixed length calculation in sip_transaction/create_tsx_key_2543
to account for signed ints being 11 characters, not 9.
ASTERISK-27319
Reported by: Youngsung Kim at LINE Corporation
Change-Id: I48de2e4ccf196990906304e8d7061f4ffdd772ff
On a fresh Asterisk source directory, the bundled pjproject tarball is
unconditionally downloaded even if the tarball is already in a specified
cache directory.
* Made check if the pjproject tarball is valid in the cache directory
before downloading the tarball on a fresh source directory.
Change-Id: Ic7ec842d3c97ecd8dafbad6f056b7fdbce41cae5
'--with-pjproject-bundled' is now the default when running
./configure. It can be disabled with '--without-pjproject-bundled'.
To make building without an internet connection easier, a new
./configure option '--with-download-cache' was added that sets
the cache for externals (like pjproject, the codecs and the DPMA),
AND the sounds files. It can also be specified as an environment
variable named "AST_DOWNLOAD_CACHE". The existing
'--with-sounds-cache' option / SOUNDS_CACHE_DIR env variable and
'--with-externals-cache' option / EXTERNALS_CACHE_DIR env variable
remain and if specified, will override '--with-downloads-cache'.
ASTERISK-27189
Change-Id: Ifa9783fddf44aafadb060c9feba713dfa81d38ce
OpenSSL has 2 levels or error processing. It's possible for the
top layer to return SSL_ERROR_SYSCALL but the lower layer return
no error, in which case processing should continue. Only the top
layer was being examined though so connections were being torn
down when they didn't need to be. This patch adds the examination
of the lower level codes, and if they return no errors, allows
processing to continue.
ASTERISK-27001
Reported-by: Ian Gilmour
patches:
pjproject-2.6.patch submitted by Ian Gilmour (license 6889)
Updated-by: George Joseph and Sauw Ming (Teluu)
Merged to upstream pjproject on 7/27/2017 (commit 5631)
Change-Id: I23844ca0c68ef1ee550f14d46f6dae57d33b7bd2
The maximum packet size for PJSIP has been increased to handle the
multiple streams being added for WebRTC.
Change-Id: I9ea1e8d02668c544acadcb1c6200e1cc1bd588b3
There wasn't any good way to pass options like --host or --build
down to the pjproject configure which makes cross-compiling difficult.
* Added a new PJPROJECT_CONFIGURE_OPTS environment variable which
can be used to pass arbitrary options to pjproject configure.
* Automatically set the pjproject configure --host and --build
options to match those supplied for the asterisk configure.
ASTERISK-27097 #close
Reported-by: Kinsey Moore
Change-Id: I5fa776e110262851173002a26ffe1172e4c35b2e
When connected_line_method is "invite", we're supposed to determine
if the client can support UPDATE and if it can, send UPDATE instead
of INVITE to avoid the SDP renegotiation. Not only was pjproject
not setting the PJSIP_INV_SUPPORT_UPDATE flag, we were testing
that invite_tsx wasn't NULL which isn't always the case.
* Updated chan_pjsip/update_connected_line_information to drop the
requirement that invite_tsx isn't NULL.
* Submitted patch to pjproject sip_inv.c that sets the
PJSIP_INV_SUPPORT_UPDATE flag correctly.
* Updated pjsip.conf.sample to clarify what happens when "invite"
is specified.
ASTERISK-27095
Change-Id: Ic2381b3567b8052c616d96fbe79564c530e81560
We now mirror the pjproject tarball and md5 at
https://github.com/asterisk/third-party/tree/master/pjproject
To improve download reliability, we now get the tarball from
our mirror instead of from pjsip.org.
ASTERISK-27052 #close
Reported-by: 'alex'
Change-Id: I60236587a8935bfa71fcc391f4e2ecb31918c08a
Without the disable, pjproject tries to build it's internal
webrtc implementation which requires sse2. This fails on
platforms without sse2.
ASTERISK-26930 #close
Reported-by: abelbeck
Change-Id: I07231f9160c35cfa42b194d3aad4e7d51fd9a410
When the Asterisk channel driver res_pjsip offers SIP-over-TLS, sometimes, not
reproducible, Asterisk crashed in pj_ssl_sock_get_info() because a NULL pointer
was read. This change avoids this crash.
ASTERISK-26927 #close
Change-Id: I24a6011b44d1426d159742ff4421cf806a52938b
0035-r5572-svn-backport-dialog-transaction-deadlock.patch
0036-r5573-svn-backport-ua-pjsua-transaction-deadlock.patch
0037-r5576-svn-backport-session-timer-crash.patch
Also removed the progress bar from wget download to stdout.
ASTERISK-26905 #close
Reported-by: Ross Beer
Change-Id: I268fb3cf71a3bb24283ff0d24bd8b03239d81256
After configuring Asterisk with '--with-pjproject-bundled' the configure/build
process attempts to download pjproject from its download site. Currently, a
timeout of 10 seconds is used that will stop the download process if pjproject
has not been fully downloaded in that time. For some systems this was not enough
time and the process was timing out too early.
This patch raises the download timeout value to '60'. Also, this patch fixes
another bug where the DOWNLOAD_TIMEOUT variable was not being properly exported
due to a naming error. DOWNLOAD_MAX_TIMEOUT is now properly renamed to
DOWNLOAD_TIMEOUT.
ASTERISK-26814 #close
Change-Id: Ia56e4e8a3d39db76bc8a1852b2cf07ec10b39842
Bundled pjproject should now only rebuild if one of the menuselect
"Compiler Flags" options changes.
Change-Id: If114a2e16b9e77af371a600d6a5e197bbf28fe43
This change adds a PJSIP patch (which has been contributed upstream)
to allow the registration of IPv6 transport types.
Using this the res_pjsip_transport_websocket module now registers
an IPv6 Websocket transport and uses it for the corresponding
traffic.
ASTERISK-26685
Change-Id: Id1f9126f995b31dc38db8fdb58afd289b4ad1647
* Removed all 2.5.5 functional patches.
* Updated usages of pj_release_pool to be "safe".
* Updated configure options to disable webrtc.
* Updated config_site.h to disable webrtc in pjmedia.
* Added Richard Mudgett's recent resolver patches.
Change-Id: Ib400cc4dfca68b3d07ce14d314e829bfddc252c7
* Re #1945 (misc): Don't trigger SRV complete callback when there is a
parse error.
* srv_resolver.c: Don't try to send query if already considered resolved.
** In resolve_hostnames() don't try to resolve a query that is already
considered resolved.
** In resolve_hostnames() fix DNS typo in comments.
** In build_server_entries() move a common expression assigning to cnt
earlier.
* sip_transport.c: Fix tdata object name to actually contain the pointer.
It helps if the logs referencing a tdata object buffer actually have a
name that includes the correct pointer as part of the name. Also since
the tdata has its own pool it helps if any logs referencing the pool have
the same name as the tdata object. This change brings tdata logging in
line with how tsx objects are named.
ASTERISK-26669 #close
ASTERISK-26738 #close
Change-Id: I56af2ded25476b3e870ca586ee69ed6954ef75af
This patch fixes 2 original issues and more that those 2 exposed.
* When we send a NOTIFY, and the client either doesn't respond or
responds with a non OK, pjproject only calls our
pubsub_on_evsub_state callback, no others. Since
pubsub_on_evsub_state (which does the sub_tree cleanup) does not
expect to be called back without the other callbacks being called
first, it just returns leaving the sub_tree orphaned. Now
pubsub_on_evsub_state checks the event for PJSIP_EVENT_TSX_STATE
which is what pjproject will set to tell us that it was the
transaction that timed out or failed and not the subscription
itself timing our or being terminated by the client. If is
TSX_STATE, pubsub_on_evsub_state now does the proper cleanup
regardless of the state of the subscription.
* When a client renews a subscription, we don't update the
persisted subscription with the new expires timestamp. This causes
subscription_persistence_recreate to prune the subscription if/when
asterisk restarts. Now, pubsub_on_rx_refresh calls
subscription_persistence_update to apply the new expires timestamp.
This exposed other issues however...
* When creating a dialog from rdata (which sub_persistence_recreate
does from the packet buffer) there must NOT be a tag on the To
header (which there will be when a client refreshes a
subscription). If there is one, pjsip_dlg_create_uas will fail.
To address this, subscription_persistence_update now accepts a flag
that indicates that the original packet buffer must not be updated.
New subscribes don't set the flag and renews do. This makes sure
that when the rdata is recreated on asterisk startup, it's done
from the original subscribe packet which won't have the tag on To.
* When creating a dialog from rdata, we were setting the dialog's
remote (SUBSCRIBE) cseq to be the same as the local (NOTIFY) cseq.
When the client tried to resubscribe after a restart with the
correct cseq, we'd reject the request with an Invalid CSeq error.
* The acts of creating a dialog and evsub by themselves when
recreating a subscription does NOT restart pjproject's subscription
timer. The result was that even if we did correctly recreate the
subscription, we never removed it if the client happened to go away
or send a non-OK response to a NOTIFY. However, there is no
pjproject function exposed to just set the timer on an evsub that
wasn't created by an incoming subscribe request. To address this,
we create our own timer using ast_sip_schedule_task. This timer is
used only for re-establishing subscriptions after a restart.
An earlier approach was to add support for setting pjproject's
timer (via a pjproject patch) and while that patch is still included
here, we don't use that call at the moment.
While addressing these issues, additional debugging was added and
some existing messages made more useful. A few formatting changes
were also made to 'pjsip show scheduled tasks' to make displaying
the subscription timers a little more friendly.
ASTERISK-26696
ASTERISK-26756
Change-Id: I8c605fc1e3923f466a74db087d5ab6f90abce68e
An earlier attempt to prevent pjsua from spitting out an extra 6795
lines of debug output every time the testsuite called it was also
turning off the ability for asterisk to output debug info when it
needed to. This patch reverts the earlier fix and instead adds
a pjproject patch that sets the startup log level to 1 for pjsua
pjsystest and the pjsua python binding. This is an asterisk-only
patch that does not affect pjproject functionality and will not be
submitted upstream.
Change-Id: I347a8b58b2626f2906ccfc1d339e907627a0c9e8
When MALLOC_DEBUG was specified, make was failing. Immediately
remaking would work. The issues was in the ordering of the make
dependencies.
Change-Id: If6030b54fc693f3179f32bfd20c6b5d5f1b3f7cd
A while back, we changed config_site.h to set PJ_LOG_MAX_LEVEL = 6.
This allowed us to control the log level better from inside Asterisk.
An unfortunate side effect of this was that the pjsua binary and
python bindings were also compiled with log level set to 6 so whenever
a testsuite test that uses pjsua runs, it spits out 6795 lines of
debug in an instant even before the test starts. I believe this
overruns the Jenkins capture buffer and prevents the test from
properly terminating. In turn, this results in the testsuite just
hanging until the job is killed. It's more frequent on the higher
end agents because they can spit out the messages faster.
Unfortunately, the messages are all spit out before we have control
of the python pj.Lib instance where we can set logging levels so the
only alternative was to actually compile pjsua and _pjsua.so with an
overridden PJ_LOG_MAX_LEVEL. Although defining a lower max level was
done in the Makefile, the define in config_site.h had to be wrapped
with "#ifndef" so the change would take effect.
Change-Id: I2af9e7d48dde1927279c586c9c725d868fe6f3ff
There were just too many issues in various environments with
multi threaded building of pjproject. It doesn't really speed
things up anyway since asterisk is already being compiled in
parallel.
Change-Id: Ie5648fb91bb89b4224b6bf43a0daa1af793c4ce1
If a tarball is corrupted during download, the makefile will attempt to
download it again. If the tarball somehow gets corrupted after it's
downloaded however, the makefile was just failing. We now
retry the download.
ASTERISK-26653 #close
Change-Id: I1b24d454852d80186f60c5a65dc4624ea8a1c359
Occasionally SIP message transactions are not found when they should be.
In the particular case an incoming INVITE transaction is CANCELed but the
INVITE transaction cannot be found so a 481 response is returned for the
CANCEL. The problematic calls have a '_' character in the Via branch
parameter.
The problem is in the pjproject PJ_HASH_USE_OWN_TOLOWER feature's code.
The problem with the "own tolower" code is that it does not calculate the
same hash value as when the pj_tolower() function is used. The "own
tolower" code will erroneously modify the ASCII characters '@', '[', '\\',
']', '^', and '_'. Calls to pj_hash_calc_tolower() can use the
PJ_HASH_USE_OWN_TOLOWER substitute algorithm when enabled. Calls to
pj_hash_get_lower(), pj_hash_set_lower(), and pj_hash_set_np_lower() call
find_entry() which never uses the PJ_HASH_USE_OWN_TOLOWER algorithm. As a
result you may not be able to find a hash tabled entry because the
calculated hash values would differ.
* Simply disable PJ_HASH_USE_OWN_TOLOWER.
ASTERISK-26490 #close
Change-Id: If89bfdb5f301b8b685881a9a2a6e0c3c5af32253
Added back in a -g3, and an -O3 when DONT_OPTIMIZE is not set, to
the CFLAGS. Not sure how they went missing.
Also fixed an uninstall problem where we weren't removing the
symlink from libasteriskpj.so.2 to libasteriskpj.so. While I was
there, I fixed it for libasteriskssl as well.
Change-Id: I9e00873b1e9082d05b5549d974534b48a2142556
Use of the new logging is as simple as issuing the new CLI command or
setting the new pjproject.conf option.
Other options that can affect the logging are how you have the pjproject
log levels mapped to Asterisk log types in pjproject.conf and if you have
configured Asterisk to log the DEBUG type messages. Altering the
pjproject.conf level mapping shouldn't be necessary for most installations
as the default mapping is sensible. Configuring Asterisk to log the DEBUG
message type is standard practice for collecting debug information.
* Added CLI "pjproject set log level" command to dynamically adjust the
maximum pjproject log message level.
* Added CLI "pjproject show log level" command to see the currently set
maximum pjproject log message level.
* Added pjproject.conf startup section "log_level" option to set the
initial maximum pjproject log message level so all messages could be
captured from initialization.
* Set PJ_LOG_MAX_LEVEL to 6 to compile in all defined logging levels into
bundled pjproject. Pjproject will use the currently set run time log
level to determine if a log message is generated just like Asterisk
verbose and debug logging levels.
* In log_forwarder(), made always log enabled and mapped pjproject log
messages. DEBUG mapped log messages are no longer gated by the current
Asterisk debug logging level.
* Removed RAII_VAR() from res_pjproject.c:get_log_level().
ASTERISK-26630 #close
Change-Id: I6dca12979f482ffb0450aaf58db0fe0f6d2e5389
The download process now has a timeout which will cause wget to retry
if it stops retrieving data for 5 seconds and fetch and curl to timeout
if the whole retrieval take smore than 30 seconds.
If the tarball retrieval works, the MD5SUM file is retrieved from
the downloads site and the md5 checksum is verified.
If either the tarball retrieval or MD5SUM retrieval fails, or the
checksums don't match, the entire process is retried once. If it
fails again, any incomplete tarball is deleted.
.DELETE_ON_ERROR: was also added to the Makefile. Not only does
this delete the tarball on failure, it till also delete corrupted
library files from the pjproject source directory should they
fail to build correctly.
Tested all the way back to FreeBSD 9, CentOS 6, Debian 6 and
Ubuntu 14.
Change-Id: Iea7d33b96a31622ab1b6e54baebaf271959514e1
OpenBSD's 'find' doesn't take the -delete argument so you have to pipe
through 'xargs rm -rf'.
'echo -e' doesn't like \t starting a line. It just prints 't' which
causes the libasteriskpj.exports file to be garbage. They were just
cosmetic so they were removed.
librt doesn't exist so the link of libasteriskpj.so fails. It's not
actually needed for linux anyway so -lrt was removed from the link.
res_rtp_asterisk was failing to load because of an undefined
DTLS_method. '|| defined(LIBRESSL_VERSION_NUMBER)' was added to the #if
so DTLSv1_method is used instead.
ASTERISK-26608
Change-Id: I926ec95b0b69633231e3ad1d6e803b977272c49c
Responding to authentication challenges leaks PJSIP memory pools.
The leak was introduced with a pjproject 2.5.5 API change.
https://trac.pjsip.org/repos/ticket/1929 changed the API usage of
pjsip_auth_clt_init() to require the new API pjsip_auth_clt_deinit() to
clean up cached authentication allocations that get allocated with
pjsip_auth_clt_reinit_req().
ASTERISK-26516 #close
Change-Id: I4473141b8c3961d0dc91c382beb3876b3efb45c8
The PJ_ICE_MAX_CHECKS constant is used by pjproject to determine how
many pairs of local/remote candidates will be made. If for some reason
we reach this upper bound, ICE will generally fail and no media will
flow between the browser and Asterisk.
This patch makes PJ_ICE_MAX_CHECKS set to the total possible number of
pairs of candidates we'd theoretically allow, which is
PJ_ICE_MAX_CAND^2. Prior to this patch, we simply multiplied
PJ_ICE_MAX_CAND by two; on systems with multiple interfaces (I blame
Docker), this is far too low to allow WebRTC calls to succeed.
Setting this to be PJ_ICE_MAX_CAND^2 allowed WebRTC calls to succeed
even when the system Asterisk was running on had quite a few virtual
interfaces.
Change-Id: Icd4f17de0ac9d3a83dddfc8bf1cb7616bc107d55
libresample is only needed by pjproject if we're building pjsua, which
we only do if TEST_FRAMEWORK is selected. It's required by pjsua to
process audio which is needed by some testsuite tests. Unfortunately,
pjproject relies on a newer version of libresample than the version
that ships by most distros so we need to compile the version that's
bundled with pjproject. Since we only need it for pjsua, we DON'T want
it's symbols exposed when we actually build asterisk.
There was a problem however... TEST_FRAMEWORK is only known AFTER we've
already run ./configure on both asterisk and pjproject but pjproject's
./configure needs to test it to know whether to set up to build
libresample or not. The previous way of figuring this out was to
always tell ./configure "yes" but not actually build the library. This
caused an issue where building libasteriskpj was being told to include
libresample but it wasn't actually there.
The solution is to still do a default pjproject configure during an
asterisk ./configure but if makeopts or menuselect.makeopts changes
subsequently, we now reconfigure pjproject, taking into account the
current state of TEST_FRAMEWORK. Previously, if makeopts or
menuselect.makeopts changed, only a recompile of pjproject was done.
Change-Id: I9b5d84c61384a3ae07fe30e85c49698378cc4685
Corey Farrell
Nick French
Richard Mudgett
George Joseph
Kevin Harwell
Joshua Colp
Jenkins2
Alexander Traud
Torrey Searle
Sean Bright
Ben Ford
Mark Michelson
Joshua Elson
zuul
Matt Jordan