Per RFC 5245, the foundation specified with an ICE candidate can be up
to 32 characters but we are only allowing for 31.
ASTERISK-27498 #close
Reported by: Michele Prà
Change-Id: I05ce7a5952721a76a2b4c90366168022558dc7cf
add_crypto_to_stream wasn't checking for a NULL
session->inv_session->neg before calling pjmedia_sdp_neg_get_state.
This was causing a crash if the negotiation hadn't already been
completed and asterisk was compiled with --enable-dev-mode.
Change-Id: I57c6229954a38145da9810fc18657bfcc4d9d0c9
In WebRTC streams (or media tracks in their world) can be grouped
together using the mslabel. This informs the browser that each
should be synchronized with each other.
This change extends the stream API so this information can
be stored with streams. The PJSIP support has been extended
to use the mslabel to determine grouped streams and store
this association on the streams. Finally when creating the
SDP the group information is used to cause each media stream
to use the same mslabel.
ASTERISK-27379
Change-Id: Id6299aa031efe46254edbdc7973c534d54d641ad
create_outgoing_sdp_stream was setting "addr_type = STR_IP6" only
when an ipv6 media_address was specified on the endpoint. If
rtp_ipv6 was set and ast_sip_get_host_ip_string returned an ipv6
address, we were leaving the addr_type set at the default of
STR_IP4. This caused the address type to be set incorrectly on the
"o" and "c" SDP attributes even though the address was set
correctly. Some clients don't like the mismatch.
* Removed the test for endpoint/media_address and now check all
addresses for ipv6.
ASTERISK-27198
Reported by: Martin Cisárik
Change-Id: I5214fc31b728117842243807e7927a319cf77592
Some endpoints do not like a stream being reused for a new
media stream. The frame/jitterbuffer can rely on underlying
attributes of the media stream in order to order the packets.
When a new stream takes its place without any notice the
buffer can get confused and the media ends up getting dropped.
This change uses the SSRC change to determine that a new source
is reusing an existing stream and then bridge_softmix renegotiates
each participant such that they see a new media stream. This
causes the frame/jitterbuffer to start fresh and work as expected.
ASTERISK-27277
Change-Id: I30ccbdba16ca073d7f31e0e59ab778c153afae07
When a sip session is refreshed, the stream topology is looped
through, checking each stream for compatible formats. This would
cause a crash if the stream state was AST_STREAM_STATE_REMOVED,
since the formats would never be set for this stream, causing
a NULL value to be returned from ast_stream_get_formats. This
commit adds a check for streams with removed states.
Also removed a stray semicolon.
Change-Id: Ic86f8b65a4a26a60885b28b8b1a0b22e1b471d42
In 45744fc53, I mistakenly broke SDP media address rewriting by
misinterpreting which address was checked in the localnet comparison.
Instead of checking the remote peer address to decide whether we need
media address rewriting, we check our local media address: if it's
local, then we rewrite. This feels awkward, but works and even made
directmedia work properly if you set local_net. (For the record: for
local peers, the SDP media rewrite code is not called, so the
comparison does no harm there.)
ASTERISK-27248 #close
Change-Id: I566be1c33f4d0a689567d451ed46bab9c3861d4f
In 2dee95cc (ASTERISK-27024) and 776ffd77 (ASTERISK-26879) there was
confusion about whether the transport_state->localnet ACL has ALLOW or
DENY semantics.
For the record: the localnet has DENY semantics, meaning that "not in
the list" means ALLOW, and the local nets are in the list.
Therefore, checks like this look wrong, but are right:
/* See if where we are sending this request is local or not, and if
not that we can get a Contact URI to modify */
if (ast_apply_ha(transport_state->localnet, &addr) != AST_SENSE_ALLOW) {
ast_debug(5, "Request is being sent to local address, "
"skipping NAT manipulation\n");
(In the list == localnet == DENY == skip NAT manipulation.)
And conversely, other checks that looked right, were wrong.
This change adds two macro's to reduce the confusion and uses those
instead:
ast_sip_transport_is_nonlocal(transport_state, addr)
ast_sip_transport_is_local(transport_state, addr)
ASTERISK-27248 #close
Change-Id: Ie7767519eb5a822c4848e531a53c0fd054fae934
Introduce a new property to rtp-engine to make it aware of
the desire for assymetric codecs or not. If asymmetric codecs
is not allowed, the bridge will compare read/write formats
and shut down the p2p bridge if needed
ASTERISK-26745 #close
Change-Id: I0d9c83e5356df81661e58d40a8db565833501a6f
Currently, the handling of the msid attribute is not quite right. According to
the spec the msid's between the offer/answer are not dependent upon one another.
Meaning the same msid's given in an offer do not have to be returned in the
answer for a given stream. And they probably shouldn't be (copied/reused) since
this can potentially cause some browser side confusion.
This patch generates new msids when both an offer and answer are sent from
Asterisk. However, Asterisk does reuse the original msid it sent out for a
reinvite. Also audio+video streams are paired together by sharing the same
stream id, but a different track id.
ASTERISK-27179 #close
Change-Id: Ifaec06dc7e65ad841633a24ebec8c8a9302d6643
The "external_media_address" option on transports is now
resolved using dnsmgr. This allows it to be automatically
refreshed regularly if refreshes are enabled in dnsmgr.
If the system is using a dynamic IP address a dynamic DNS
hostname can be provided to keep the IP address up to
date.
Change-Id: Ia54771720dff0105bde55d5bbb81a3ba437e05b2
This function is a replica of SIPDtmfMode, allowing the DTMF mode of a
PJSIP call to be modified on a per-call basis
ASTERISK-27085 #close
Change-Id: I20eef5da3e5d1d3e58b304416bc79683f87e7612
This patch creates a new configuration option called "webrtc". When enabled it
defaults and enables the following options that are needed in order for webrtc
to work in Asterisk:
rtcp-mux, use_avpf, ice_support, and use_received_transport=enabled
media_encryption=dtls
dtls_verify=fingerprint
dtls_setup=actpass
When "webrtc" is enabled, this patch also parses the "msid" media level
attribute from an SDP. It will also appropriately add it onto the outgoing
session when applicable.
Lastly, when "webrtc" is enabled h264 RTCP FIR feedback frames are now sent.
ASTERISK-27119 #close
Change-Id: I5ec02e07c5d5b9ad86a34fdf31bf2f9da9aac6fd
BUNDLE is a specification used in WebRTC to allow multiple
streams to use the same underlying transport. This reduces
the number of ICE and DTLS negotiations that has to occur
to 1 normally.
This change implements this by adding support for it to
the RTP SDP module in PJSIP. BUNDLE can be turned on using
the "bundle" option and on an offer we will offer to
bundle streams together. On an answer we will accept any
bundle groups provided. Once accepted each stream is bundled
to another RTP instance for transport.
For the res_rtp_asterisk changes the ability to bundle
an RTP instance to another based on the SSRC received
from the remote side has been added. For outgoing traffic
if an RTP instance is bundled to another we will use the
other RTP instance for any transport related things. For
incoming traffic received from the transport instance we
look up the correct instance based on the SSRC and use it
for any non-transport related data.
ASTERISK-27118
Change-Id: I96c0920b9f9aca7382256484765a239017973c11
The existing auto dtmf mode reverts to inband if 4733 fails to be
negotiated. This patch adds a new mode auto_info which will
switch to INFO instead of inband if 4733 is not available.
ASTERISK-27066 #close
Change-Id: Id185b11e84afd9191a2f269e8443019047765e91
The stream topology (list of streams and order) is now stored with the
configured PJSIP endpoints and used during the negotiation process.
Media negotiation state information has been changed to be stored
in a separate object. Two of these objects exist at any one time
on a session. The active media state information is what was previously
negotiated and the pending media state information is what the
media state will become if negotiation succeeds. Streams and other
state information is stored in this object using the index (or
position) of each individual stream for easy lookup.
The ability for a media type handler to specify a callback for
writing has been added as well as the ability to add file
descriptors with a callback which is invoked when data is available
to be read on them. This allows media logic to live outside of
the chan_pjsip module.
Direct media has been changed so that only the first audio and
video stream are directly connected. In the future once the RTP
engine glue API has been updated to know about streams each individual
stream can be directly connected as appropriate.
Media negotiation itself will currently answer all the provided streams
on an offer within configured limits and on an offer will use the
topology created as a result of the disallow/allow codec lines.
If a stream has been removed or declined we will now mark it as such
within the resulting SDP.
Applications can now also request that the stream topology change.
If we are told to do so we will limit any provided formats to the ones
configured on the endpoint and send a re-invite with the new topology.
Two new configuration options have also been added to PJSIP endpoints:
max_audio_streams: determines the maximum number of audio streams to
offer/accept from an endpoint. Defaults to 1.
max_video_streams: determines the maximum number of video streams to
offer/accept from an endpoint. Defaults to 1.
ASTERISK-27076
Change-Id: I8afd8dd2eb538806a39b887af0abd046266e14c7
PJSIP support in Asterisk differs from chan_sip in that it
allows media to be sent as-is without transcoding provided
the codecs were negotiated in the SDP. This is allowed
according to the RFC. Support for this differs quite a lot
though and some endpoints do not handle it well.
This change extends the 'asymmetric_rtp_codec' option to
also cover this case. When set to no (the default) the code
behaves as chan_sip does - the best codec is selected and
we will only ever send that, unless we change what we are
sending if the remote side changes. When set to yes we
will send media as-is without transcoding if the codec
has been negotiated in the SDP.
ASTERISK-26996
Change-Id: Ib1647f6902a0843e8c435946f831c2159e8d1d51
This saves around 100 bytes when G.711, G.722, G.729, and GSM are advertised in
SDP. This reduces the chance to hit the MTU bearer of 1300 bytes for SIP over
UDP, if many codecs are allowed in Asterisk. This new feature is enabled
together with the optional feature compact_headers=yes via the file pjsip.conf.
ASTERISK-26932 #close
Change-Id: Iaa556ab4c8325cd34c334387ab2847fab07b1689
In all non-pbx modules, AST_MODULE_LOAD_FAILURE has been changed
to AST_MODULE_LOAD_DECLINE. This prevents asterisk from exiting
if a module can't be loaded. If the user wishes to retain the
FAILURE behavior for a specific module, they can use the "require"
or "preload-require" keyword in modules.conf.
A new API was added to logger: ast_is_logger_initialized(). This
allows asterisk.c/check_init() to print to the error log once the
logger subsystem is ready instead of just to stdout. If something
does fail before the logger is initialized, we now print to stderr
instead of stdout.
Change-Id: I5f4b50623d9b5a6cb7c5624a8c5c1274c13b2b25
* create_rtp(): Eliminate use of deprecated transport struct member. That
member and several others in the transport structure were deprecated
because of an infinite loop created when using realtime configuration.
See 2451d4e455
ASTERISK-26851
Change-Id: I0533aa13c9ce3c6cc394e0fd2b5bf1cd1b2ef3bc
* create_rtp(): Fix unexpected alteration of global address_rtp if a
transport is bound to an address.
* create_rtp(): Fix use of uninitialized memory if the endpoint RTP media
address is invalid or the transport has an invalid address.
ASTERISK-26851
Change-Id: Icde42e65164a88913cb5c2601b285eebcff397b7
chan_sip sets the hangup cause code to AST_CAUSE_REQUESTED_CHAN_UNAVAIL
(44) when a channel is hung up due to an RTP timeout. So do the same
when it happens with PJSIP for parity.
Change-Id: I3546ebbde6460c22a27c9da1bf321711b5961ab8
We were inadvertenly referencing the cos_video option to determine if we
should set the tos_audio and cos_audio value on the RTP instance.
Change-Id: Ia7964f486801d39dc6f5dae570baff079e1595b0
If local_net is not defined on a transport, transport_state->localnet
will be NULL. ast_apply_ha will, be default, return AST_SENSE_ALLOW in
this case, causing the external_media_address, if set, to be skipped.
This patch causes us to only check if we are sending within a network if
local_net is defined.
ASTERISK-26879 #close
Change-Id: Ib661c31a954cabc9c99f1f25c9c9a5c5b82cbbfb
Currently a wildcard address is used for the local RTP socket, which
will not always result in the same address as used by the SIP socket
(e.g. if explicit transport addresses are configured).
Use the transport's host address when binding new local RTP sockets if
available.
ASTERISK-26851
Change-Id: I098c29c9d1f79a4f970d72ba894874ac75954f1a
This commit adds support for RFC 5761: Multiplexing RTP Data and Control
Packets on a Single Port. Specifically, it enables the feature when
using chan_pjsip.
A new option, "rtcp_mux" has been added to endpoint configuration in
pjsip.conf. If set, then Asterisk will attempt to use rtcp-mux with
whatever it communicates with. Asterisk follows the rules set forth in
RFC 5761 with regards to falling back to standard RTCP behavior if the
far end does not indicate support for rtcp-mux.
The lion's share of the changes in this commit are in
res_rtp_asterisk.c. This is because it was pretty much hard wired to
have an RTP and an RTCP transport. The strategy used here is that when
rtcp-mux is enabled, the current RTCP transport and its trappings (such
as DTLS SSL session) are freed, and the RTCP session instead just
mooches off the RTP session. This leads to a lot of specialized if
statements throughout.
ASTERISK-26732 #close
Reported by Dan Jenkins
Change-Id: If46a93ba1282418d2803e3fd7869374da8b77ab5
This change adds the media stream topology definition and API for
accessing and using it.
Some refactoring of the stream was also done.
ASTERISK-26786
Change-Id: Ic930232d24d5ad66dcabc14e9b359e0ff8e7f568
The latest Release candidate fails to create RTP streams when IPv6
is not available. Due to the changes made in September the ast_sockaddr
structure passed around to create these streams is always of AF_INET6
type, causing failure when used for IPv4. This patch adds a utility
function to check for availability of IPv6 and applies such check
at startup to determine how to create the ast_sockaddr structures.
ASTERISK-26617 #close
Change-Id: I627a4e91795e821111e1cda523f083a40d0e0c3e
When optimistic SRTP was on it was possible for us to still
set up a call without an audio stream if an offer was received
with required SRTP.
This change makes it so this scenario will now fail with a 488
response.
ASTERISK-26575
Change-Id: I7d14187037681f48879bd20319ac79d0877318f3
The res_pjsip_sdp_rtp module did not restrict the number of
formats added to a media stream in the SDP to the defined
limit. If allow=all was used with additional loaded codecs this
could result in the next media stream being overwritten some.
This change restricts the module to limit it to the defined
maximum and also increases the maximum in our bundled pjproject.
ASTERISK-26541 #close
Change-Id: I0dc5f59d3891246cafa2f3df5ec406f088559ee8
ASTERISK_REGISTER_FILE no longer has any purpose so this commit removes
all traces of it.
Previously exported symbols removed:
* __ast_register_file
* __ast_unregister_file
* ast_complete_source_filename
This also removes the mtx_prof static variable that was declared when
MTX_PROFILE was enabled. This variable was only used in lock.c so it
is now initialized in that file only.
ASTERISK-26480 #close
Change-Id: I1074af07d71f9e159c48ef36631aa432c86f9966
When channel format changes occurred as a result of an RTP
re-negotiation the bridge was not informed this had happened.
As a result the bridge technology was not re-evaluated and the
channel may have been in a bridge technology that was incompatible
with its formats. The bridge is now unbridged and the technology
re-evaluated when this occurs.
The chan_pjsip module also allowed asymmetric codecs for sending
and receiving. This did not work with all devices and caused one
way audio problems. The default has been changed to NOT do this
but to match the sending codec to the receiving codec. For users
who want asymmetric codecs an option has been added, asymmetric_rtp_codec,
which will return chan_pjsip to the previous behavior.
The codecs returned by the chan_pjsip module when queried by
the bridge_native_rtp module were also not reflective of the
actual negotiated codecs. The nativeformats are now returned as
they reflect the actual negotiated codecs.
ASTERISK-26423 #close
Change-Id: I6ec88c6e3912f52c334f1a26983ccb8f267020dc
When an explicit media_address is provided the address family
in the SDP needs to be set to reflect it.
ASTERISK-26309
Change-Id: Ib9350cc91c120eb2f96f0623d3907d12af67eb79
This change adds support for dual stack automatically. No
configuration is required and the IP address and version
in the SIP messages and SDP will be automatically changed
based on the transport over which the message is being
sent. RTP usage has also been changed to listen on both
IPv4 and IPv6 simultaneously to allow media to flow, and
to allow ICE support on both simultaneously. This also
allows failover between IPv6 and IPv4 to work as expected.
ASTERISK-26309 #close
Change-Id: I235a421d8f9a326606d861b449fa6fe3a030572d
This patch add config to pjsip by endpoint.
;preferred_codec_only=yes
; Respond to a SIP invite with the single most preferred codec
; rather than advertising all joint codec capabilities. This
; limits the other side's codec choice to exactly what we prefer.
ASTERISK-26317 #close
Reported by: AaronAn
Tested by: AaronAn
Change-Id: Iad04dc55055403bbf5ec050997aee2dadc4f0762
Attempting to load a transport from realtime was forcing asterisk into an
infinite recursion loop. The first thing transport_apply did was to do a
sorcery retrieve by id for an existing transport of the same name. For files,
this just returns the previous object from res_sorcery_config's internal
container, if any. For realtime, the res_sourcery_realtime driver looks in the
database and finds the existing row but now it has to rehydrate it into a
sorcery object which means calling... transport_apply. And so it goes.
The main issue with loading from realtime (apart from the loop) was that
transport stores structures and pointers directly in the ast_sip_transport
structure instead of the separate ast_transport_state structure. This patch
separates those items into the ast_sip_transport_state structure. The pattern
is roughly the same as res_pjsip_outbound_registration.
Although all current usages of ast_sip_transport and ast_sip_transport_state
were modified to use the new ast_sip_get_transport_state API, the original
items are left in ast_sip_transport and kept updated to maintain ABI
compatability for third-party modules. They are marked as deprecated and
noted that they're now in ast_sip_transport_state.
ASTERISK-25606 #close
Reported-by: Martin Moučka
Change-Id: Ic7a836ea8e786e8def51fe3f8cce855ea54f5f19
On a system with multiple ip addresses in the same subnet, if a
transport is bound to a specific ip address and endpoint/media_address
is set, the SIP/SDP will have the correct address in all fields but
the rtp stream MAY still originate from one of the other ip addresses,
most probably the "primary" ip address. This happens because
res_pjsip_sdp_rtp/create_rtp always calls ast_instance_new with
the "all" ip address (0.0.0.0 or ::).
The new option causes res_pjsip_sdp_rtp/create_rtp to call
ast_rtp_instance_new with the endpoint's media_address (if specified)
instead of the "all" address. This causes the packets to originate from
the specified address.
ASTERISK-25632
ASTERISK-25637
Reported-by: Olivier Krief
Reported-by: Dan Journo
Change-Id: I3dfaa079e54ba7fb7c4fd1f5f7bd9509bbf8bd88
In SIP/SDP, Opus has two channels always (see RFC 7587 section 7). The actual
amount of channels is negotiated in-band. Therefore now, the Opus codec and its
attribute rtpmap are registered with two channels.
ASTERISK-24779 #close
Reported by: PowerPBX
Tested by: Alexander Traud
patches:
asterisk-24779.patch submitted by Sean Bright (license #5060)
Change-Id: Ic7ac13cafa1d3450b4fa4987350924b42cbb657b
The keepalive support in res_pjsip_sdp_rtp currently assumes
that a stream will only be negotiated once. This is false.
If the stream is replaced and later added back it can be
negotiated again causing multiple keepalive scheduled items
to exist. This change explicitly deletes the existing
keepalive scheduled item before adding the new one.
The res_pjsip_sdp_rtp module also does not stop RTP
keepalives or timeout timer if the stream has been
replaced. This change adds a callback to the session media
interface to allow a media stream to be stopped without
the resources being destroyed. This allows the scheduled
items and RTP to be stopped when the stream no longer
exists.
ASTERISK-25356 #close
Change-Id: Ibe6a7cc0927c87326fd5f1c0d4ad889dbfbea1de
If the ast_strndup() call fails to allocate a copy of the
transport string for parsing, fail gracefully.
ASTERISK-25323
Reported by: Scott Griepentrog
Change-Id: Ia4b905ce6d03da53fea526224455c1044b1a5a28
Modules commonly used the pj_gethostip function for retrieving the
IP address of the host. This function does not cache the result and may
result in a DNS lookup occurring, or additional work. If the DNS
server is unreachable or network issues arise this can cause the
pj_gethostip function to block for a period of time.
This change adds an ast_sip_get_host_ip and ast_sip_get_host_ip_string
function which does the same thing but caches the host IP address at
module load time. This results in no additional work being done each
time the local host IP address is needed.
ASTERISK-25342 #close
Change-Id: I3205deb679b01fa5ac05a94b623bfd620a2abe1e
When sending an RTP keepalive, we need to be sure we're not dealing with
a NULL RTP instance. There had been a NULL check, but the commit that
added the rtp_timeout and rtp_hold_timeout options removed the NULL
check.
Change-Id: I2d7dcd5022697cfc6bf3d9e19245419078e79b64
This change adds support for the 'rtp_timeout' and 'rtp_timeout_hold'
endpoint options. These allow the channel to be hung up if RTP
is not received from the remote endpoint for a specified number of
seconds.
ASTERISK-25259 #close
Change-Id: I3f39daaa7da2596b5022737b77799d16204175b9
This adds an "rtp_keepalive" option for PJSIP endpoints. Similar to the
chan_sip option, this specifies an interval, in seconds, at which we
will send RTP comfort noise frames. This can be useful for keeping RTP
sessions alive as well as keeping NAT associations alive during lulls.
ASTERISK-25242 #close
Reported by Mark Michelson
Change-Id: I3b9903d99e35fe5d0b53ecc46df82c750776bc8d
Some phones send g.726 audio packed for AAL2, which differs from what is
recommended by RFC 3351. If Asterisk receives audio formatted as such when
negotiating g.726 then it sounds a bit distorted. Added an option to
res_pjsip_endpoint that allows g.726 negotiated audio to be treated as g.726
AAL2 packed.
ASTERISK-25158 #close
Reported by: Steve Pitts
Change-Id: Ie7e21f75493d7fe53e75e12c971e72f5afa33615
Git does not support the ability to replace a token with a version
string during check-in. While it does have support for replacing a
token on clone, this is somewhat sub-optimal: the token is replaced
with the object hash, which is not particularly easy for human
consumption. What's more, in practice, the source file version was often
not terribly useful. Generally, when triaging bugs, the overall version
of Asterisk is far more useful than an individual SVN version of a file. As a
result, this patch removes Asterisk's support for showing source file
versions.
Specifically, it does the following:
* Rename ASTERISK_FILE_VERSION macro to ASTERISK_REGISTER_FILE, and
remove passing the version in with the macro. Other facilities
than 'core show file version' make use of the file names, such as
setting a debug level only on a specific file. As such, the act of
registering source files with the Asterisk core still has use. The
macro rename now reflects the new macro purpose.
* main/asterisk:
- Refactor the file_version structure to reflect that it no longer
tracks a version field.
- Remove the "core show file version" CLI command. Without the file
version, it is no longer useful.
- Remove the ast_file_version_find function. The file version is no
longer tracked.
- Rename ast_register_file_version/ast_unregister_file_version to
ast_register_file/ast_unregister_file, respectively.
* main/manager: Remove value from the Version key of the ModuleCheck
Action. The actual key itself has not been removed, as doing so would
absolutely constitute a backwards incompatible change. However, since
the file version is no longer tracked, there is no need to attempt to
include it in the Version key.
* UPGRADE: Add notes for:
- Modification to the ModuleCheck AMI Action
- Removal of the "core show file version" CLI command
Change-Id: I6cf0ff280e1668bf4957dc21f32a5ff43444a40e
With this patch, chan_pjsip/res_pjsip now sets the native formats to the
codecs negotiated by a call.
* The changes in chan_pjsip.c and res_pjsip_sdp_rtp.c set the native
formats to include all the negotiated audio codecs instead of only the
initial preferred audio codec and later the currently received audio
codec.
* The audio frame handling in channel.c:ast_read() is more streamlined and
will automatically adjust to changes in received frame formats. The new
policy is to remove translation and pass the new frame format to the
receiver except if the translation was to a signed linear format. A more
long winded version is commented in ast_read() along with some caveats.
* The audio frame handling in channel.c:ast_write() is more streamlined
and will automatically adjust any needed translation to changes in the
frame formats sent. Frame formats sent can change for many reasons such
as a recording is being played back or the bridged peer changed the format
it sends. Since it is a normal expectation that sent formats can change,
the codec mismatch warning message is demoted to a debug message.
* Removed the short circuit check in
channel.c:ast_channel_make_compatible_helper(). Two party bridges need to
make channels compatible with each other. However, transfers and moving
channels among bridges can result in otherwise compatible channels having
sub-optimal translation paths if the make compatible check is short
circuited. A result of forcing the reevaluation of channel compatibility
is that the asterisk.conf:transcode_via_slin and codecs.conf:genericplc
options take effect consistently now. It is unfortunate that these two
options are enabled by default and negate some of the benefits to the
changes in channel.c:ast_read() by forcing translation through signed
linear on a two party bridge.
* Improved the softmix bridge technology to better control the translation
of frames to the bridge. All of the incoming translation is now normally
handled by ast_read() instead of splitting any translation steps between
ast_read() and the slin factory. If any frame comes in with an unexpected
format then the translation path in ast_read() is updated for the next
frame and the slin factory handles the current frame translation.
This is the final patch in a series of patches aimed at improving
translation path choices. The other patches are on the following reviews:
https://reviewboard.asterisk.org/r/4600/https://reviewboard.asterisk.org/r/4605/
ASTERISK-24841 #close
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/4609/
........
Merged revisions 434671 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434672 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds support for automatically detecting the type of DTMF that a
PJSIP endpoint supports. When the 'dtmf_mode' endpoint option is set to 'auto',
the channel created for an endpoint will attempt to determine if RFC 4733
DTMF is supported. If so, it will use that DTMF type. If not, the DTMF type
for the channel will be set to inband.
Review: https://reviewboard.asterisk.org/r/4438
ASTERISK-24706 #close
Reported by: yaron nahum
patches:
yaron_patch_3_Feb.diff submitted by yaron nahum (License 6676)
........
Merged revisions 434637 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434638 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Valgrind found a memory leak and invalid access.
* Fix invalid access by sscanf() being fed a non-nul terminated string of
digits in res/res_pjsip_sdp_rtp.c:get_codecs().
* Fix memory leak in main/sorcery.c:sorcery_object_field_destructor().
* Fix potential NULL pointer dereference in
main/xmldoc.c:xmldoc_get_syntax_config_option().
Review: https://reviewboard.asterisk.org/r/4513/
........
Merged revisions 433199 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433200 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Valgrind found some memory leaks associated with ast_sockaddr_resolve().
Most of the leaks had already been fixed by earlier memory leak hunt
patches. This patch performs an audit of ast_sockaddr_resolve() and found
one more.
* Fix ast_sockaddr_resolve() memory leak in
apps/app_externalivr.c:app_exec().
* Made main/netsock2.c:ast_sockaddr_resolve() always set the addrs
parameter for safety so the pointer will never be uninitialized on return.
The same goes for res/res_pjsip_acl.c:extract_contact_addr().
* Made functions that call ast_sockaddr_resolve() with RAII_VAR()
controlling the addrs variable use ast_free instead of ast_free_ptr to
provide better MALLOC_DEBUG information.
Review: https://reviewboard.asterisk.org/r/4509/
........
Merged revisions 433056 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 433057 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433058 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Unfortunately, while initial testing with ConfBridge did not reproduce the
audio problem alluded to in the comment in res_pjsip_sdp_rtp, further testing
did show that bridge_softmix and/or ConfBridge has a severe problem bridging
two or more participants at different sampling rates. Sometimes, it even picks
odd sampling rates that cause hideous audio problems.
This patch backs out the offending portion of the code until the issues in
the affected bridging modules can be more properly analyzed.
ASTERISK-24841
........
Merged revisions 432423 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432425 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch addresses the following problems:
* ari/resource_channels: In ARI, we currently create a format capability
structure of SLIN and apply it to the new channel being created. This was
originally done when the PBX core was used to create the channel, as there
was a condition where a newly created channel could be created without any
formats. Unfortunately, now that the Dial API is being used, this has two
drawbacks:
(a) SLIN, while it will ensure audio will flows, can cause a lot of
needless transcodings to occur, particularly when a Local channel is
created to the dialplan. When no format capabilities are available, the
Dial API handles this better by handing all audio formats to the requsted
channels. As such, we defer to that API to provide the format
capabilities.
(b) If a channel (requester) is causing this channel to be created, we
currently don't use its format capabilities as we are passing in our own.
However, the Dial API will use the requester channel's formats if none
are passed into it, and the requester channel exists and has format
capabilities. This is the "best" scenario, as it is the most likely to
create a media path that minimizes transcoding.
Fixing this simply entails removing the providing of the format capabilities
structure to the Dial API.
* chan_pjsip: Rather than blindly picking the first format in the format
capability structure - which actually *can* be a video or text format - we
select an audio format, and only pick the first format if that fails. That
minimizes the weird scenario where we attempt to transcode between video/audio.
* res_pjsip_sdp_rtp: Applied the joint capapbilites to the format structure.
Since ast_request already limits us down to one format capability once the
format capabilities are passed along, there's no reason to squelch it here.
* channel: Fixed a comment. The reason we have to minimize our requested
format capabilities down to a single format is due to Asterisk's inability
to convey the format to be used back "up" a channel chain. Consider the
following:
PJSIP/A => L;1 <=> L;2 => PJSIP/B
g,u,a g,u,a g,u,a u
That is, we have PJSIP/A dialing a Local channel, where the Local;2 dials
PJSIP/B. PJSIP/A has native format capabilities g722,ulaw,alaw; the Local
channel has inherited those format capabilities down the line; PJSIP/B
supports only ulaw. According to these format capabilities, ulaw is
acceptable and should be selected across all the channels, and no
transcoding should occur. However, there is no way to convey this: when L;2
and PJSIP/B are put into a bridge, we will select ulaw, but that is not
conveyed to PJSIP/A and L;1. Thus, we end up with:
PJSIP/A <=> L;1 <=> L;2 <=> PJSIP/B
g g X u u
Which causes g722 to be written to PJSIP/B.
Even if we can convey the 'ulaw' choice back up the chain (which through
some severe hacking in Local channels was accomplished), such that the chain
looks like:
PJSIP/A <=> L;1 <=> L;2 <=> PJSIP/B
u u u u
We have no way to tell PJSIP/A's *channel driver* to Answer in the SDP back
with only 'ulaw'. This results in all the channel structures being set up
correctly, but PJSIP/A *still* sending g722 and causing the chain to fall
apart.
There's a lot of difficulty just in setting this up, as there are numerous
race conditions in the act of bridging, and no clean mechanism to pass the
selected format backwards down an established channel chain. As such, the
best that can be done at this point in time is clarifying the comment.
Review: https://reviewboard.asterisk.org/r/4434/
ASTERISK-24812 #close
Reported by: Matt Jordan
........
Merged revisions 432195 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432196 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Analyzing a one-off crash on a busy system showed that processing a REFER
request had a NULL session channel pointer. The only way I can think of
that could cause this is if an outgoing BYE transaction overlapped the
incoming REFER transaction in a collision. Asterisk sends a BYE while the
phone sends a REFER to complete an attended transfer.
* Made check the session channel pointer before processing an incoming
REFER request in res_pjsip_refer.
* Fixed similar crash potential for res_pjsip supplement incoming request
processing for res_pjsip_sdp_rtp INFO, res_pjsip_caller_id INVITE/UPDATE,
res_pjsip_messaging MESSAGE, and res_pjsip_send_to_voicemail REFER
messages.
* Made res_pjsip_messaging respond to a message body too large with a 413
instead of ignoring it.
ASTERISK-24700 #close
Reported by: Zane Conkle
Review: https://reviewboard.asterisk.org/r/4417/
........
Merged revisions 431898 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431899 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When an SDP is created for an outgoing request/response, the ICE candidates
obtained from the RTP instance are currently leaked. This causes the ao2
container that holds the candidates to never properly be reclaimed when the
RTP instance is destroyed.
This patch properly decrements the ICE candidates' container if it is
successfully obtained.
ASTERISK-24769 #close
Reported by: Matt Jordan
........
Merged revisions 431600 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431601 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change fixes two issues:
1. During a swap operation bridging added the new channel before having the swap channel
leave. This was not handled in bridge_native_rtp and could result in a channel not getting
reinvited back to Asterisk. After this change the swap channel will leave first and the
new channel will then join.
2. If a re-invite was received after a session had been established any upstream elements
(such as bridge_native_rtp) were not notified that they may want to re-evaluate things.
After this change an UPDATE_RTP_PEER control frame is queued when this situation occurs
and upstream can react.
AST-1524 #close
Review: https://reviewboard.asterisk.org/r/4378/
........
Merged revisions 431157 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431158 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A native rtp bridge was being chosen (it shouldn't have been) when using two
pjsip channels with incompatible DTMF modes. This patch sets the rtp instance
property, AST_RTP_PROPERTY_DTMF, for the appropriate DTMF mode(s) for pjsip.
It was not being set before, meaning all DTMF modes for pjsip were being treated
as compatible, thus native bridging would be chosen as the bridge type when it
shouldn't have been.
ASTERISK-24459 #close
Reported by: Yaniv Simhi
Review: https://reviewboard.asterisk.org/r/4265/
........
Merged revisions 429763 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429764 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change adds an option, moh_passthrough, that when enabled will pass
hold and unhold requests through using a SIP re-invite. When placing on
hold a re-invite with sendonly will be sent and when taking off hold a
re-invite with sendrecv will be sent. This allows remote servers to handle
the musiconhold instead of the local Asterisk instance being responsible.
Review: https://reviewboard.asterisk.org/r/4103/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427112 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch for r425924 introduced a bug, wherein sending an INVITE request
with no SDP would cause Asterisk to not send an SDP Offer in the 200
OK. The current structure of res_pjsip_sdp_rtp is a bit hard to deal with
to fix this, as create_outgoing_sdp has no knowledge of whether or not it is
creating an SDP as a new Offer or an Answer. This is something of an oversight
in the callback definition, as the caller of it does have this information.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425945 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The usage of the local override_prefs variable in create_outgoing_sdp_stream
was previously to track an override format preference set by PJSIP_MEDIA_OFFER.
Now, however, that function simply sets the joint capabilities structure,
session->req_caps. During the media format rework, the override_prefs was
instead used to check if there were any formats in session->req_caps.
However, this usage isn't useful in create_outgoing_sdp_stream.
session->req_caps contains the negotiated formats for *all* streams, not just
the current one being created. Thus, so long as any stream of any type has
provided a format, override_prefs will be non-zero. Hence, its usage in
checking whether or not we should look at the formats on the endpoint or
the joint capabilities is generally useless.
There's only two things useful to check:
(1) Does the endpoint have a format for the media type?
(2) Did we negotiate a format for the media type?
If either of those is a 'no', then we must kill the media stream.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425924 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When an inbound SDP offer is received, Asterisk currently makes a few
incorrection assumptions:
(1) If the offer contains more than a single audio/video stream, Asterisk will
reject the entire stream with a 488. This is an overly strict response;
generally, Asterisk should accept the media streams that it can accept and
decline the others.
(2) If the offer contains a declined media stream, Asterisk will attempt to
process it anyway. This can result in attempting to match format
capabilities on a declined media stream, leading to a 488. Asterisk should
simply ignore declined media streams.
(3) Asterisk will currently attempt to handle offers with AVPF with
use_avpf=No/AVP with use_avpf=Yes. This mismatch results in invalid SDP
answers being sent in response. If there is a mismatch between the media
type being offered and the configuration, Asterisk must reject the offer
with a 488.
This patch does the following:
* Asterisk will accept SDP offers with at least one media stream that it can
use. Some WARNING messages have been dropped to NOTICEs as a result.
* Asterisk will not accept an offer with a media type that doesn't match its
configuration.
* Asterisk will ignore declined media streams properly.
#SIPit31
Review: https://reviewboard.asterisk.org/r/4063/
ASTERISK-24122 #close
Reported by: James Van Vleet
ASTERISK-24381 #close
Reported by: Matt Jordan
........
Merged revisions 425868 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 425879 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425881 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Outgoing PJSIP calls can result in non-negotiated formats listed in the
channel's native formats if video formats are listed in the endpoint's
configuration. The resulting call could then use a non-negotiated format
resulting in one way audio.
* Simplified the update of session->req_caps in set_caps(). Why do
something in five steps when only one is needed?
AFS-162 #close
Review: https://reviewboard.asterisk.org/r/4000/
........
Merged revisions 423561 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423563 65c4cc65-6c06-0410-ace0-fbb531ad65f3
On a SIP reinvite that changes media strams, the PJSIP channel driver was
flooding the log with "Asked to transmit frame type %s, while native
formats is %s" warnings.
* Fixes PJSIP not setting up translation paths when the formats change on
a reinvite. AFS-63 was effectively reintroduced because of the media
formats work. res_pjsip_sdp_rtp.c:set_caps()
* Improved the unexpected frame format WARNING message to include more
information.
* Added protective locking while altering formats on a channel. Reworked
set_format() to simplify and protect the formats under manipulation.
* Restored some code that got lost in the media_formats work.
(channel.c:set_format() and res_pjsip_sdp_rtp.c:set_caps())
AFS-137 #close
Reported by: Mark Michelson
Review: https://reviewboard.asterisk.org/r/3906/
........
Merged revisions 421645 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421646 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
res_rtp_asterisk: Add SHA-256 support for DTLS and perform DTLS negotiation on RTCP.
This change fixes up DTLS support in res_rtp_asterisk so it can accept and provide
a SHA-256 fingerprint, so it occurs on RTCP, and so it occurs after ICE negotiation
completes. Configuration options to chan_sip and chan_pjsip have also been added to
allow behavior to be tweaked (such as forcing the AVP type media transports in SDP).
ASTERISK-22961 #close
Reported by: Jay Jideliov
Review: https://reviewboard.asterisk.org/r/3679/
Review: https://reviewboard.asterisk.org/r/3686/
........
Merged revisions 417678 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417679 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Currently, there are situations that can occur when using chan_pjsip
and certain dialplan applications (notably ChanSpy()) that can cause
the channel to get no audio with scrolling warnings about format
mismatches. This is caused by a failure to update translation paths on
a mid-call native format update since the raw formats have already
been updated by res_pjsip_sdp_rtp.c in set_caps(). Removing the
premature raw format updates allows the translation paths to be setup
correctly and the raw read and write formats with them.
AFS-63 #close
........
Merged revisions 415342 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@415343 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change fixes a bug where if an SDP with media address and sendonly was
received twice the underlying call would go off hold, instead of remaining on hold.
This occured because the code did not properly take into account that the SDP
may contain both a valid media address and the sendonly attribute.
The code now examines the sendonly attribute and media address first, so if the
SDP is received again no change will occur.
ASTERISK-23558 #comment Reported by: John Bigelow
Review: https://reviewboard.asterisk.org/r/3472/
........
Merged revisions 413119 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@413120 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The setting 'use_ptime' is supposed to tell Asterisk to honour the ptime
attribute in an offer, preferring it to whatever packetization
preferences have been set internally. Currently, however, something
rather quirky will happen:
(1) The SDP answer will be constructed in create_outgoing_sdp_stream.
This will use the preferences from the endpoint, such that the 200 OK
response will add the packetization preferences from the endpoint, and
not what was offered.
(2) When the 200 response is issued, apply_negotiated_sdp_stream is called.
This will call apply_packetization, which will use the ptime attribute
from the offer internally.
We end up telling the offerer to use the internal ptime attribute, but we end
up using the offered ptime attribute. Hilarity ensues.
This patch modifies the behaviour by calling apply_packetization from
negotiate_incoming_sdp_stream, which is called prior to
create_outgoing_sdp_stream. This causes the format preferences on the
session's media object to be set to the inbound ptime value (if 'use_ptime'
is enabled), such that the construction of the answer gets the right value
immediately.
Review: https://reviewboard.asterisk.org/r/3244/
........
Merged revisions 408999 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@409000 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change adds improvements to support for allow=all in
pjsip.conf so that it functions as intended. Previously,
the allow/disallow socery configuration would set & clear
codecs from the media.codecs and media.prefs list, but if
all was specified the prefs list was not updated. Then a
call would fail when create_outgoing_sdp_stream() created
an SDP with no audio codecs.
A new function ast_codec_pref_append_all() is provided to
add all codecs to the prefs list - only those not already
on the list. This enables the configuration to specify a
codec preference, but still add all codecs, and even then
remove some codecs, as shown in this example:
allow = ulaw, alaw, all, !g729, !g723
Also, the display order of allow in cli output is updated
to match the configuration by using prefs instead of caps
when generating a human readable string.
Finally, a change to create_outgoing_sdp_stream() skips a
codec when it does not have a payload code instead of the
call failing.
(closes issue ASTERISK-23018)
Reported by: xrobau
Review: https://reviewboard.asterisk.org/r/3131/
........
Merged revisions 405875 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405876 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Depending on configuration it was possible for a media stream to be
created without any media formats. The produced SDP would fail internal
validation and cause a crash.
The code will now no longer add media streams with no formats to the SDP,
allowing it to pass validation and work.
(closes issue ASTERISK-22858)
Reported by: Anthony Messina
........
Merged revisions 403223 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403224 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In PJMEDIA, pjmedia_sdp_rtpmap_to_attr will attempt to use the string
rtpmap.param regardless of its length value. Simply setting the length to 0
does not prevent the garbage on the stack in rtpmap.param.ptr from being
formatted in a sprintf call. This patch initializes the string to NULL so that
at the very least, something is provided to the function that is predictable.
........
Merged revisions 402941 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402943 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Channel snapshots have string representations of the channel's native formats.
Prior to this change, the format strings were re-created on ever channel snapshot
creation. Since channel native formats rarely change, this was very wasteful.
Now, string representations of formats may optionally be stored on the ast_format_cap
for cases where string representations may be requested frequently. When formats
are altered, the string cache is marked as invalid. When strings are requested, the
cache validity is checked. If the cache is valid, then the cached strings are copied.
If the cache is invalid, then the string cache is rebuilt and copied, and the cache
is marked as being valid again.
Review: https://reviewboard.asterisk.org/r/2879
........
Merged revisions 400356 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400363 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The callback function for changing the media address in streams wrongly assumes that a connection line
will always be present. This is false as no line is present if a stream has been rejected.
(closes issue ASTERISK-22645)
Reported by: Rusty Newton
........
Merged revisions 400360 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400361 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The endpoint option does not apply to communication with external entities. Rather,
the option is applied to all communications with the endpoint. The external_media_address
transport configuration option may override the endpoint option if it turns out that
we are going to be communicating with an external entity.
Two things of note:
1) I have not updated the XML documentation. This is being taken care of by Rusty as part
of his work on issue ASTERISK-22405
2) This commit is likely to cause testsuite failures since there are tests that use the
external_media_address endpoint option, and they will need to be changed over. Well, I'm
planning to get that updated ASAP after this commit.
(closes issue ASTERISK-22528)
reported by Rusty Newton
........
Merged revisions 399283 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399284 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds pass through support for Opus and VP8. That includes:
* Format attribute negotiation for Opus. Note that unlike some other codecs,
the draft RFC specifies having spaces delimiting the attributes in addition
to ';', so you have "attra=X; attrb=Y". This broke the attribute parsing in
chan_sip, so a small tweak was also included in this patch for that.
* A format attribute negotiation module for Opus, res_format_attr_opus
* Fast picture update for VP8. Since VP8 uses a different RTCP packet number
than FIR, this really is specific to VP8 at this time.
Note that the format attribute negotiation in res_pjsip_sdp_rtp was written
by mjordan. The rest of this patch was written completely by Lorenzo Miniero.
Review: https://reviewboard.asterisk.org/r/2723/
(closes issue ASTERISK-21981)
Reported by: Tzafrir Cohen
patches:
asterisk_opus+vp8_passthrough_20130718.patch uploaded by lminiero (License 6518)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397526 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The general gist is to have a clear boundary between old SIP stuff
and new SIP stuff by having the word "SIP" for old stuff and "PJSIP"
for new stuff. Here's a brief rundown of the changes:
* The word "Gulp" in dialstrings, functions, and CLI commands is now
"PJSIP"
* chan_gulp.c is now chan_pjsip.c
* Function names in chan_gulp.c that were "gulp_*" are now "chan_pjsip_*"
* All files that were "res_sip*" are now "res_pjsip*"
* The "res_sip" directory is now "res_pjsip"
* Files in the "res_pjsip" directory that began with "sip_*" are now "pjsip_*"
* The configuration file is now "pjsip.conf" instead of "res_sip.conf"
* The module info for all PJSIP-related files now uses "PJSIP" instead of "SIP"
* CLI and AMI commands created by Asterisk's PJSIP modules now have "pjsip" as
the starting word instead of "sip"
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395764 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Sean Bright
George Joseph
Joshua Colp
Ben Ford
Walter Doekes
Torrey Searle
Kevin Harwell
Mark Michelson
Jenkins2
Alexander Traud
Richard Mudgett
Matt Jordan
Richard Begg
Guido Falsi
zuul
Corey Farrell
Aaron An
Alexei Gradinari
George Joseph
Scott Griepentrog
Rodrigo Ramírez Norambuena
Kinsey Moore
Scott Griepentrog