34079 Commits (f6d296256612d40ef787753a04040a68264aa16c)

 

All Branches   

Search

Author	SHA1	Message	Date
Fabrice Fontaine	7fc25285fa	res/stasis/control.c: include signal.h ... Include signal.h to avoid the following build failure with uclibc-ng raised since 2694792e13: stasis/control.c: In function 'exec_command_on_condition': stasis/control.c:313:3: warning: implicit declaration of function 'pthread_kill'; did you mean 'pthread_yield'? [-Wimplicit-function-declaration] 313 | pthread_kill(control->control_thread, SIGURG); | ^~~~~~~~~~~~ | pthread_yield stasis/control.c:313:41: error: 'SIGURG' undeclared (first use in this function) 313 | pthread_kill(control->control_thread, SIGURG); | ^~~~~~ cherry-pick-to: 18 cherry-pick-to: 20 cherry-pick-to: 21 Fixes: #729	12 months ago
Naveen Albert	077962dd7b	res_pjsip_logger: Preserve logging state on reloads. ... Currently, reloading res_pjsip will cause logging to be disabled. This is because logging can also be controlled via the debug option in pjsip.conf and this defaults to "no". To improve this, logging is no longer disabled on reloads if logging had not been previously enabled using the debug option from the config. This ensures that logging enabled from the CLI will persist through a reload. ASTERISK-29912 #close Resolves: #246 UserNote: Issuing "pjsip reload" will no longer disable logging if it was previously enabled from the CLI.	12 months ago
Naveen Albert	1f1c5bb902	logger: Add unique verbose prefixes for levels 5-10. ... Add unique verbose prefixes for levels higher than 4, so that these can be visually differentiated from each other. Resolves: #721	1 year ago
Joshua C. Colp	384f9c24c9	Revert "app_record: Add RECORD_TIME output variable." ... This reverts commit 6e8dccdbbf.	1 year ago
Naveen Albert	6e8dccdbbf	app_record: Add RECORD_TIME output variable. ... This adds the RECORD_TIME variable to Record(), which is set to the recording duration before the application returns. Resolves: #548 UpgradeNote: The RECORD_TIME variable now contains the duration of Record() recordings in milliseconds.	1 year ago
Naveen Albert	7cffbabe5c	say.c: Fix cents off-by-one due to floating point rounding. ... Some of the money announcements can be off by one cent, due to the use of floating point in the money calculations, which is bad for obvious reasons. This replaces floating point with simple string parsing to ensure the cents value is converted accurately. Resolves: #525	1 year ago
Naveen Albert	01ff5c8140	loader.c: Allow dependent modules to be unloaded recursively. ... Because of the (often recursive) nature of module dependencies in Asterisk, hot swapping a module on the fly is cumbersome if a module is depended on by other modules. Currently, dependencies must be popped manually by unloading dependents, unloading the module of interest, and then loading modules again in reverse order. To make this easier, the ability to do this recursively in certain circumstances has been added, as an optional extension to the "module refresh" command. If requested, Asterisk will check if a module that has a positive usecount could be unloaded safely if anything recursively dependent on it were unloaded. If so, it will go ahead and unload all these modules and load them back again. This makes hot swapping modules that provide dependencies much easier. Resolves: #474 UserNote: In certain circumstances, modules with dependency relations can have their dependents automatically recursively unloaded and loaded again using the "module refresh" CLI command or the ModuleLoad AMI command.	1 year ago
Henrik Liljedahl	b267629b77	res_pjsip_sdp_rtp.c: Initial RTP inactivity check must consider the rtp_timeout setting. ... First rtp activity check was performed after 500ms regardless of the rtp_timeout setting. Having a call in ringing state for more than rtp_timeout and the first rtp package is received more than 500ms after sdp negotiation and before the rtp_timeout, erronously caused the call to be hungup. Changed to perform the first rtp inactivity check after the timeout setting preventing calls to be disconnected before the rtp_timeout has elapsed since sdp negotiation. Fixes #710	1 year ago
George Joseph	8e119a72f0	tcptls/iostream: Add support for setting SNI on client TLS connections ... If the hostname field of the ast_tcptls_session_args structure is set (which it is for websocket client connections), that hostname will now automatically be used in an SNI TLS extension in the client hello. Resolves: #713 UserNote: Secure websocket client connections now send SNI in the TLS client hello.	1 year ago
George Joseph	758ed2b9fd	stir_shaken: Fix memory leak, typo in config, tn canonicalization ... * Fixed possible memory leak in tn_config:tn_get_etn() where we weren't releasing etn if tn or eprofile were null. * We now canonicalize TNs before using them for lookups or adding them to Identity headers. * Fixed a typo in stir_shaken.conf.sample. Resolves: #716	1 year ago
George Joseph	a07a16aa23	make_buildopts_h: Always include DETECT_DEADLOCKS ... Since DETECT_DEADLOCKS is now split from DEBUG_THREADS, it must always be included in buildopts.h instead of only when ADD_CFLAGS_TO_BUILDOPTS_H is defined. A SEGV will result otherwise. Resolves: #719	1 year ago
Spiridonov Dmitry	7e7a603360	sorcery.c: Fixed crash error when executing "module reload" ... Fixed crash error when cli "module reload". The error appears when compiling with res_prometheus and using the sorcery memory cache for registrations	1 year ago
Naveen Albert	c1b69d460d	callerid.c: Parse previously ignored Caller ID parameters. ... Commit f2f397c1a8 previously made it possible to send Caller ID parameters to FXS stations which, prior to that, could not be sent. This change is complementary in that we now handle receiving all these parameters on FXO lines and provide these up to the dialplan, via chan_dahdi. In particular: * If a redirecting reason is provided, the channel's redirecting reason is set. No redirecting number is set, since there is no parameter for this in the Caller ID protocol, but the reason can be checked to determine if and why a call was forwarded. * If the Call Qualifier parameter is received, the Call Qualifier variable is set. * Some comments have been added to explain why some of the code is the way it is, to assist other people looking at it. With this change, Asterisk's Caller ID implementation is now reasonably complete for both FXS and FXO operation. Resolves: #681	1 year ago
George Joseph	57ce1fe01b	logger.h: Add SCOPE_CALL and SCOPE_CALL_WITH_RESULT ... If you're tracing a large function that may call another function multiple times in different circumstances, it can be difficult to see from the trace output exactly which location that function was called from. There's no good way to automatically determine the calling location. SCOPE_CALL and SCOPE_CALL_WITH_RESULT simply print out a trace line before and after the call. The difference between SCOPE_CALL and SCOPE_CALL_WITH_RESULT is that SCOPE_CALL ignores the function's return value (if any) where SCOPE_CALL_WITH_RESULT allows you to specify the type of the function's return value so it can be assigned to a variable. SCOPE_CALL_WITH_INT_RESULT is just a wrapper for SCOPE_CALL_WITH_RESULT and the "int" return type.	1 year ago
Sean Bright	a358458912	app_queue.c: Properly handle invalid strategies from realtime. ... The existing code sets the queue strategy to `ringall` but it is then immediately overwritten with an invalid one. Fixes #707	1 year ago
Naveen Albert	a0b579807c	file.c, channel.c: Don't emit warnings if progress received. ... Silently ignore AST_CONTROL_PROGRESS where appropriate, as most control frames already are. Resolves: #696	1 year ago
Sean Bright	79210720bc	alembic: Correct NULLability of PJSIP id columns. ... Fixes #695	1 year ago
George Joseph	70fd8f1c93	rtp_engine and stun: call ast_register_atexit instead of ast_register_cleanup ... rtp_engine.c and stun.c were calling ast_register_cleanup which is skipped if any loadable module can't be cleanly unloaded when asterisk shuts down. Since this will always be the case, their cleanup functions never get run. In a practical sense this makes no difference since asterisk is shutting down but if you're in development mode and trying to use the leak sanitizer, the leaks from both of those modules clutter up the output.	1 year ago
George Joseph	52881ef6e5	manager.c: Add missing parameters to Login documentation ... * Added the AuthType and Key parameters for MD5 authentication. * Added the Events parameter. Resolves: #689	1 year ago
Naveen Albert	bb33925d75	func_callerid: Emit warning if invalid redirecting reason set. ... Emit a warning if REDIRECTING(reason) is set to an invalid reason, consistent with what happens when REDIRECTING(orig-reason) is set to an invalid reason. Resolves: #683	1 year ago
Naveen Albert	0923a49cc2	chan_dahdi: Add DAHDIShowStatus AMI action. ... * Add an AMI action to correspond to the "dahdi show status" command, allowing span information to be retrieved via AMI. * Show span number and sig type in "dahdi show channels". Resolves: #673	1 year ago
Sperl Viktor	0ab4a5ef6b	res_pjsip_endpoint_identifier_ip: Add endpoint identifier transport address. ... Add a new identify_by option to res_pjsip_endpoint_identifier_ip called 'transport' this matches endpoints based on the bound ip address (local) instead of the 'ip' option, which matches on the source ip address (remote). UserNote: set identify_by=transport for the pjsip endpoint. Then use the existing 'match' option and the new 'transport' option of the identify. Fixes: #672	1 year ago
George Joseph	b23f089472	res_stir_shaken: Fix compilation for CentOS7 (openssl 1.0.2) ... * OpenSSL 1.0.2 doesn't support X509_get0_pubkey so we now use X509_get_pubkey. The difference is that X509_get_pubkey requires the caller to free the EVP_PKEY themselves so we now let RAII_VAR do that. * OpenSSL 1.0.2 doesn't support upreffing an X509_STORE so we now wrap it in an ao2 object. * OpenSSL 1.0.2 doesn't support X509_STORE_get0_objects to get all the certs from an X509_STORE and there's no easy way to polyfill it so the CLI commands that list profiles will show a "not supported" message instead of listing the certs in a store. Resolves: #676	1 year ago
George Joseph	f6b9d9e7d7	Fix incorrect application and function documentation references ... There were a few references in the embedded documentation XML where the case didn't match or where the referenced app or function simply didn't exist any more. These were causing 404 responses in docs.asterisk.org.	1 year ago
Sean Bright	2b5673b68d	cli.c: `core show channels concise` is not really deprecated. ... Fixes #675	1 year ago
Sperl Viktor	895ab9d798	res_pjsip_endpoint_identifier_ip: Endpoint identifier request URI ... Add ability to match against PJSIP request URI. UserNote: this new feature let users match endpoints based on the indound SIP requests' URI. To do so, add 'request_uri' to the endpoint's 'identify_by' option. The 'match_request_uri' option of the identify can be an exact match for the entire request uri, or a regular expression (between slashes). It's quite similar to the header identifer. Fixes: #599	1 year ago
Joshua Elson	c8ab570c6f	Implement Configurable TCP Keepalive Settings in PJSIP Transports ... This commit introduces configurable TCP keepalive settings for both TCP and TLS transports. The changes allow for finer control over TCP connection keepalives, enhancing stability and reliability in environments prone to connection timeouts or where intermediate devices may prematurely close idle connections. This has proven necessary and has already been tested in production in several specialized environments where access to the underlying transport is unreliable in ways invisible to the operating system directly, so these keepalive and timeout mechanisms are necessary. Fixes #657	1 year ago
Naveen Albert	2de1a68339	chan_dahdi: Don't retry opening nonexistent channels on restart. ... Commit 729cb1d390 added logic to retry opening DAHDI channels on "dahdi restart" if they failed initially, up to 1,000 times in a loop, to address cases where the channel was still in use. However, this retry loop does not use the actual error, which means chan_dahdi will also retry opening nonexistent channels 1,000 times per channel, causing a flood of unnecessary warning logs for an operation that will never succeed, with tens or hundreds of thousands of open attempts being made. The original patch would have been more targeted if it only retried on the specific relevant error (likely EBUSY, although it's hard to say since the original issue is no longer available). To avoid the problem above while avoiding the possibility of breakage, this skips the retry logic if the error is ENXIO (No such device or address), since this will never succeed. Resolves: #669	1 year ago
Martin Tomec	4ebef70763	res_pjsip_refer.c: Allow GET_TRANSFERRER_DATA ... There was functionality in chan_sip to get REFER headers, with GET_TRANSFERRER_DATA variable. This commit implements the same functionality in pjsip, to ease transfer from chan_sip to pjsip. Fixes: #579 UserNote: the GET_TRANSFERRER_DATA dialplan variable can now be used also in pjsip.	1 year ago
Martin Nystroem	394ffc27ea	res_ari.c: Add additional output to ARI requests when debug is enabled ... When ARI debug is enabled the logs will now output http method and the uri. Fixes: #666	1 year ago
Sean Bright	63168983aa	alembic: Fix compatibility with SQLAlchemy 2.0+. ... SQLAlchemy 2.0 changed the way that commits/rollbacks are handled causing the final `UPDATE` to our `alembic_version_<whatever>` tables to be rolled back instead of committed. We now use one connection to determine which `alembic_version_<whatever>` table to use and another to run the actual migrations. This prevents the erroneous rollback. This change is compatible with both SQLAlchemy 1.4 and 2.0.	1 year ago
jonatascalebe	988986bdc9	manager.c: Add new parameter 'PreDialGoSub' to Originate AMI action ... manager.c: Add new parameter 'PreDialGoSub' to Originate AMI action The action originate does not has the ability to run an subroutine at initial channel, like the Aplication Originate. This update give this ability for de action originate too. For example, we can run a routine via Gosub on the channel to request an automatic answer, so the caller does not need to accept the call when using the originate command via manager, making the operation more efficient. UserNote: When using the Originate AMI Action, we now can pass the PreDialGoSub parameter, instructing the asterisk to perform an subrouting at channel before call start. With this parameter an call initiated by AMI can request the channel to start the call automaticaly, adding a SIP header to using GoSUB, instructing to autoanswer the channel, and proceeding the outbuound extension executing. Exemple of an context to perform the previus indication: [addautoanswer] exten => _s,1,Set(PJSIP_HEADER(add,Call-Info)=answer-after=0) exten => _s,n,Set(PJSIP_HEADER(add,Alert-Info)=answer-after=0) exten => _s,n,Return()	1 year ago
Naveen Albert	4c280c21c2	menuselect: Minor cosmetic fixes. ... Improve some of the formatting from dd3f17c699 (#521).	1 year ago
Naveen Albert	fc80bed5a7	pbx_variables.c: Prevent SEGV due to stack overflow. ... It is possible for dialplan to result in an infinite recursion of variable substitution, which eventually leads to stack overflow. If we detect this, abort substitution and log an error for the user to fix the broken dialplan. Resolves: #480 UpgradeNote: The maximum amount of dialplan recursion using variable substitution (such as by using EVAL_EXTEN) is capped at 15.	1 year ago
Holger Hans Peter Freyther	688095c6cb	res_prometheus: Fix duplicate output of metric and help text ... The prometheus exposition format requires each line to be unique[1]. This is handled by struct prometheus_metric having a list of children that is managed when registering a metric. In case the scrape callback is used, it is the responsibility of the implementation to handle this correctly. Originally the bridge callback didn't handle NULL snapshots, the crash fix lead to NULL metrics, and fixing that lead to duplicates. The original code assumed that snapshots are not NULL and then relied on "if (i > 0)" to establish the parent/children relationship between metrics of the same class. This is not workerable as the first bridge might be invisible/lacks a snapshot. Fix this by keeping a separate array of the first metric by class. Instead of relying on the index of the bridge, check whether the array has an entry. Use that array for the output. Add a test case that verifies that the help text is not duplicated. Resolves: #642 [1] https://prometheus.io/docs/instrumenting/exposition_formats/#grouping-and-sorting	1 year ago
Naveen Albert	ef7788e0e4	manager.c: Add CLI command to kick AMI sessions. ... This adds a CLI command that can be used to manually kick specific AMI sessions. Resolves: #485 UserNote: The "manager kick session" CLI command now allows kicking a specified AMI session.	1 year ago
George Joseph	555a541680	.github: NightlyAdmin now calls external CloseStaleIssuesAndPRs	1 year ago
Naveen Albert	953dc3d127	chan_dahdi: Allow specifying waitfordialtone per call. ... The existing "waitfordialtone" setting in chan_dahdi.conf applies permanently to a specific channel, regardless of how it is being used. This rather restrictively prevents a system from simultaneously being able to pick free lines for outgoing calls while also allowing barge-in to a trunk by some other arrangement. This allows specifying "waitfordialtone" using the CHANNEL function for only the next call that will be placed, allowing significantly more flexibility in the use of trunk interfaces. Resolves: #472 UserNote: "waitfordialtone" may now be specified for DAHDI trunk channels on a per-call basis using the CHANNEL function.	1 year ago
Naveen Albert	786f45d94e	res_parking: Fail gracefully if parking lot is full. ... Currently, if a parking lot is full, bridge setup returns -1, causing dialplan execution to terminate without TryExec. However, such failures should be handled more gracefully, the same way they are on other paths, as indicated by the module's author, here: http://lists.digium.com/pipermail/asterisk-dev/2018-December/077144.html Now, callers will hear the parking failure announcement, and dialplan will continue, which is consistent with existing failure modes. Resolves: #624	1 year ago
Sean Bright	d2b6248196	res_config_mysql.c: Support hostnames up to 255 bytes. ... Fixes #654	1 year ago
Sean Bright	e5e9692738	res_pjsip: Fix alembic downgrade for boolean columns. ... When downgrading, ensure that we don't touch columns that didn't actually change during upgrade.	1 year ago
Stanislav Abramenkov	49e6661e40	Upgrade bundled pjproject to 2.14.1 ... Fixes: asterisk#648 UserNote: Bundled pjproject has been upgraded to 2.14.1. For more information visit pjproject Github page: https://github.com/pjsip/pjproject/releases/tag/2.14.1	1 year ago
Sean Bright	e0d3e9da23	alembic: Quote new MySQL keyword 'qualify.' ... Fixes #651	1 year ago
Maximilian Fridrich	e8cfed4516	res_pjsip_session: Reset pending_media_state->read_callbacks ... In handle_negotiated_sdp the pending_media_state->read_callbacks must be reset before they are added in the SDP handlers in handle_negotiated_sdp_session_media. Otherwise, old callbacks for removed streams and file descriptors could be added to the channel and Asterisk would poll on non-existing file descriptors. Resolves: #611	1 year ago
George Joseph	67613d19d6	res_pjsip_stir_shaken.c: Add checks for missing parameters ... * Added checks for missing session, session->channel and rdata in stir_shaken_incoming_request. * Added checks for missing session, session->channel and tdata in stir_shaken_outgoing_request. Resolves: #645	1 year ago
George Joseph	34196f8796	.github: Add PAT to PRSubmitActions/Add Reviewers	1 year ago
Naveen Albert	320c98eec8	app_dial: Add dial time for progress/ringing. ... Add a timeout option to control the amount of time to wait if no early media is received before giving up. This allows aborting early if the destination is not being responsive. Resolves: #588 UserNote: The timeout argument to Dial now allows specifying the maximum amount of time to dial if early media is not received.	1 year ago
Naveen Albert	b791c27385	app_voicemail: Properly reinitialize config after unit tests. ... Most app_voicemail unit tests were not properly cleaning up after themselves after running. This led to test mailboxes lingering around in the system. It also meant that if any unit tests in app_voicemail that create mailboxes were executed and the module was not unloaded/loaded again prior to running the test_voicemail_vm_info unit test, Asterisk would segfault due to an attempt to copy a NULL string. The load_config test did actually have logic to reinitialize the config after the test. However, this did not work in practice since load_config() would not reload the config since voicemail.conf had not changed during the test; thus, additional logic has been added to ensure that voicemail.conf is truly reloaded, after any unit tests which modify the users list. This prevents the SEGV due to invalid mailboxes lingering around, and also ensures that the system state is restored to what it was prior to the tests running. Resolves: #629	1 year ago
Shaaah	037792b57b	app_queue.c : fix "queue add member" usage string ... Fixing bracket placement in the "queue add member" cli usage string.	1 year ago
Naveen Albert	b5850941b1	app_voicemail: Allow preventing mark messages as urgent. ... This adds an option to allow preventing callers from leaving messages marked as 'urgent'. Resolves: #619 UserNote: The leaveurgent mailbox option can now be used to control whether callers may leave messages marked as 'Urgent'.	1 year ago