179 Commits (f32fd478e2fe30b94e7a914334c4bfca415ef957)

Author	SHA1	Message	Date
Sean Bright	2266ed9502	alembic: Make 'revises' header comment match reality. ... (cherry picked from commit c5fbf5dcae)	8 months ago
Ben Ford	0939d0779c	channel: Add multi-tenant identifier. ... This patch introduces a new identifier for channels: tenantid. It's a stringfield on the channel that can be used for general purposes. It will be inherited by other channels the same way that linkedid is. You can set tenantid in a few ways. The first is to set it in the dialplan with the Set and CHANNEL functions: exten => example,1,Set(CHANNEL(tenantid)=My tenant ID) It can also be accessed via CHANNEL: exten => example,2,NoOp(CHANNEL(tenantid)) Another method is to use the new tenantid option for pjsip endpoints in pjsip.conf: [my_endpoint] type=endpoint tenantid=My tenant ID This is considered the best approach since you will be able to see the tenant ID as early as the Newchannel event. It can also be set using set_var in pjsip.conf on the endpoint like setting other channel variable: set_var=CHANNEL(tenantid)=My tenant ID Note that set_var will not show tenant ID on the Newchannel event, however. Tenant ID has also been added to CDR. It's read-only and can be accessed via CDR(tenantid). You can also get the tenant ID of the last channel communicated with via CDR(peertenantid). Tenant ID will also show up in CEL records if it has been set, and the version number has been bumped accordingly. Fixes: #740 UserNote: tenantid has been added to channels. It can be read in dialplan via CHANNEL(tenantid), and it can be set using Set(CHANNEL(tenantid)=My tenant ID). In pjsip.conf, it is recommended to use the new tenantid option for pjsip endpoints (e.g., tenantid=My tenant ID) so that it will show up in Newchannel events. You can set it like any other channel variable using set_var in pjsip.conf as well, but note that this will NOT show up in Newchannel events. Tenant ID is also available in CDR and can be accessed with CDR(tenantid). The peer tenant ID can also be accessed with CDR(peertenantid). CEL includes tenant ID as well if it has been set. UpgradeNote: A new versioned struct (ast_channel_initializers) has been added that gets passed to __ast_channel_alloc_ap. The new function ast_channel_alloc_with_initializers should be used when creating channels that require the use of this struct. Currently the only value in the struct is for tenantid, but now more fields can be added to the struct as necessary rather than the __ast_channel_alloc_ap function. A new option (tenantid) has been added to endpoints in pjsip.conf as well. CEL has had its version bumped to include tenant ID. (cherry picked from commit 3841fa814e)	8 months ago
George Joseph	1ba2317472	ast-db-manage: Remove duplicate enum creation ... Remove duplicate creation of ast_bool_values from 2b7c507d7d12_add_queue_log_option_log_restricted_.py. This was causing alembic upgrades to fail since the enum was already created in fe6592859b85_fix_mwi_subscribe_replaces_.py back in 2018. Resolves: #797 (cherry picked from commit af58084855)	10 months ago
Alexei Gradinari	8a09a6ca6d	app_queue: Add option to not log Restricted Caller ID to queue_log ... Add a queue option log-restricted-caller-id to strip the Caller ID when storing the ENTERQUEUE event in the queue log if the Caller ID is restricted. Resolves: #765 UpgradeNote: Add a new column to the queues table: queue_log_option_log_restricted ENUM('0','1','off','on','false','true','no','yes') to control whether the Restricted Caller ID will be stored in the queue log. UserNote: Add a Queue option log-restricted-caller-id to control whether the Restricted Caller ID will be stored in the queue log. If log-restricted-caller-id=no then the Caller ID will be stripped if the Caller ID is restricted. (cherry picked from commit 192a848311)	10 months ago
George Joseph	22c3ff2b0c	Revert "res_pjsip_endpoint_identifier_ip: Add endpoint identifier transport address." ... This reverts PR #602 Resolves: #GHSA-qqxj-v78h-hrf9	12 months ago
Sean Bright	765788f57b	alembic: Correct NULLability of PJSIP id columns. ... Fixes #695 (cherry picked from commit df6f30022f)	12 months ago
Sperl Viktor	c1d0ea6c38	res_pjsip_endpoint_identifier_ip: Add endpoint identifier transport address. ... Add a new identify_by option to res_pjsip_endpoint_identifier_ip called 'transport' this matches endpoints based on the bound ip address (local) instead of the 'ip' option, which matches on the source ip address (remote). UserNote: set identify_by=transport for the pjsip endpoint. Then use the existing 'match' option and the new 'transport' option of the identify. Fixes: #672 (cherry picked from commit c8769f3d5a)	12 months ago
Sperl Viktor	d2255002f7	res_pjsip_endpoint_identifier_ip: Endpoint identifier request URI ... Add ability to match against PJSIP request URI. UserNote: this new feature let users match endpoints based on the indound SIP requests' URI. To do so, add 'request_uri' to the endpoint's 'identify_by' option. The 'match_request_uri' option of the identify can be an exact match for the entire request uri, or a regular expression (between slashes). It's quite similar to the header identifer. Fixes: #599 (cherry picked from commit ac297d15f8)	12 months ago
Joshua Elson	fb084a53c4	Implement Configurable TCP Keepalive Settings in PJSIP Transports ... This commit introduces configurable TCP keepalive settings for both TCP and TLS transports. The changes allow for finer control over TCP connection keepalives, enhancing stability and reliability in environments prone to connection timeouts or where intermediate devices may prematurely close idle connections. This has proven necessary and has already been tested in production in several specialized environments where access to the underlying transport is unreliable in ways invisible to the operating system directly, so these keepalive and timeout mechanisms are necessary. Fixes #657 (cherry picked from commit 555eb9d3d2)	12 months ago
Sean Bright	a07b5ca39e	alembic: Fix compatibility with SQLAlchemy 2.0+. ... SQLAlchemy 2.0 changed the way that commits/rollbacks are handled causing the final `UPDATE` to our `alembic_version_<whatever>` tables to be rolled back instead of committed. We now use one connection to determine which `alembic_version_<whatever>` table to use and another to run the actual migrations. This prevents the erroneous rollback. This change is compatible with both SQLAlchemy 1.4 and 2.0. (cherry picked from commit 1944c9d72e)	12 months ago
Sean Bright	1897c57392	res_pjsip: Fix alembic downgrade for boolean columns. ... When downgrading, ensure that we don't touch columns that didn't actually change during upgrade. (cherry picked from commit ce8b564509)	12 months ago
Sean Bright	1a0541df50	alembic: Quote new MySQL keyword 'qualify.' ... Fixes #651 (cherry picked from commit 17cf90cc8b)	12 months ago
Sean Bright	0aa4dbcae7	res_pjsip: Use consistent type for boolean columns. ... This migrates the relevant schema objects from the `('yes', 'no')` definition to the `('0', '1', 'off', 'on', 'false', 'true', 'yes', 'no')` one. Fixes #617 (cherry picked from commit 1a94502551)	1 year ago
George Joseph	d7e262226f	Stir/Shaken Refactor ... Why do we need a refactor? The original stir/shaken implementation was started over 3 years ago when little was understood about practical implementation. The result was an implementation that wouldn't actually interoperate with any other stir-shaken implementations. There were also a number of stir-shaken features and RFC requirements that were never implemented such as TNAuthList certificate validation, sending Reason headers in SIP responses when verification failed but we wished to continue the call, and the ability to send Media Key(mky) grants in the Identity header when the call involved DTLS. Finally, there were some performance concerns around outgoing calls and selection of the correct certificate and private key. The configuration was keyed by an arbitrary name which meant that for every outgoing call, we had to scan the entire list of configured TNs to find the correct cert to use. With only a few TNs configured, this wasn't an issue but if you have a thousand, it could be. What's changed? * Configuration objects have been refactored to be clearer about their uses and to fix issues. * The "general" object was renamed to "verification" since it contains parameters specific to the incoming verification process. It also never handled ca_path and crl_path correctly. * A new "attestation" object was added that controls the outgoing attestation process. It sets default certificates, keys, etc. * The "certificate" object was renamed to "tn" and had it's key change to telephone number since outgoing call attestation needs to look up certificates by telephone number. * The "profile" object had more parameters added to it that can override default parameters specified in the "attestation" and "verification" objects. * The "store" object was removed altogther as it was never implemented. * We now use libjwt to create outgoing Identity headers and to parse and validate signatures on incoming Identiy headers. Our previous custom implementation was much of the source of the interoperability issues. * General code cleanup and refactor. * Moved things to better places. * Separated some of the complex functions to smaller ones. * Using context objects rather than passing tons of parameters in function calls. * Removed some complexity and unneeded encapsuation from the config objects. Resolves: #351 Resolves: #46 UserNote: Asterisk's stir-shaken feature has been refactored to correct interoperability, RFC compliance, and performance issues. See https://docs.asterisk.org/Deployment/STIR-SHAKEN for more information. UpgradeNote: The stir-shaken refactor is a breaking change but since it's not working now we don't think it matters. The stir_shaken.conf file has changed significantly which means that existing ones WILL need to be changed. The stir_shaken.conf.sample file in configs/samples/ has quite a bit more information. This is also an ABI breaking change since some of the existing objects needed to be changed or removed, and new ones added. Additionally, if res_stir_shaken is enabled in menuselect, you'll need to either have the development package for libjwt v1.15.3 installed or use the --with-libjwt-bundled option with ./configure. (cherry picked from commit 2e0d837e01)	1 year ago
Flole998	096243745c	res_pjsip_outbound_registration.c: Add User-Agent header override ... This introduces a setting for outbound registrations to override the global User-Agent header setting. Resolves: #515 UserNote: PJSIP outbound registrations now support a per-registration User-Agent header (cherry picked from commit c7fc6ae362)	1 year ago
Mike Bradeen	ab1a9fa7d1	app_voicemail_odbc: remove macrocontext from voicemail_messages table ... When app_macro was deprecated, the macrocontext column was removed from the INSERT statement but the binds were not renumbered. This broke the insert. This change removes the macrocontext column via alembic and re-numbers the existing columns in the INSERT. Fixes: #527 UserNote: The fix requires removing the macrocontext column from the voicemail_messages table in the voicemail database via alembic upgrade. UpgradeNote: The fix requires that the voicemail database be upgraded via alembic. Upgrading to the latest voicemail database via alembic will remove the macrocontext column from the voicemail_messages table. (cherry picked from commit a22db8fd60)	1 year ago
Sean Bright	9831c65f38	alembic: Update list of TLS methods available on ps_transports. ... Related to #221 and #222. Also adds `*.ini` to the `.gitignore` file in ast-db-manage for convenience. (cherry picked from commit c7838a352a)	1 year ago
sungtae kim	39c2f5733e	res_pjsip: Expanding PJSIP endpoint ID and relevant resource length to 255 characters ... This commit introduces an extension to the endpoint and relevant resource sizes for PJSIP, transitioning from its current 40-character constraint to a more versatile 255-character capacity. This enhancement significantly overcomes limitations related to domain qualification and practical usage, ultimately delivering improved functionality. In addition, it includes adjustments to accommodate the expanded realm size within the ARI, specifically enhancing the maximum realm length. Resolves: #345 UserNote: With this update, the PJSIP realm lengths have been extended to support up to 255 characters. UpgradeNote: As part of this update, the maximum allowable length for PJSIP endpoints and relevant resources has been increased from 40 to 255 characters. To take advantage of this enhancement, it is recommended to run the necessary procedures (e.g., Alembic) to update your schemas. (cherry picked from commit 9b70b18dec)	1 year ago
George Joseph	c4e2c00553	alembic: Fix quoting of the 100rel column ... Add quoting around the ps_endpoints 100rel column in the ALTER statements. Although alembic doesn't complain when generating sql statements, postgresql does (rightly so). Resolves: #274 (cherry picked from commit f8438714ca)	2 years ago
Sean Bright	b2c75ea7f3	ast-db-manage: Synchronize revisions between comments and code. ... In a handful of migrations, the comment header that indicates the current and previous revisions has drifted from the identifiers revision and down_revision variables. This updates the comment headers to match the code.	2 years ago
Sean Bright	a094620058	ast-db-manage: Fix alembic branching error caused by #122. ... Fixes #147.	2 years ago
Naveen Albert	ce7a72d7e2	res_musiconhold: Add option to loop last file. ... Adds the loop_last option to res_musiconhold, which allows the last audio file in the directory to be looped perpetually once reached, rather than circling back to the beginning again. Resolves: #122 ASTERISK-30462 UserNote: The loop_last option in musiconhold.conf now allows the last file in the directory to be looped once reached.	2 years ago
Niklas Larsson	c1f21b6f66	app_queue: Preserve reason for realtime queues ... When Asterisk is restarted it does not preserve paused reason for members of realtime queues. This was fixed for non-realtime queues in ASTERISK_25732 Resolves: #66 UpgradeNote: Add a new column to the queue_member table: reason_paused VARCHAR(80) so the reason can be preserved. UserNote: Make paused reason in realtime queues persist an Asterisk restart. This was fixed for non-realtime queues in ASTERISK_25732.	2 years ago
Naveen Albert	d1bec3623e	res_pjsip_session: Add overlap_context option. ... Adds the overlap_context option, which can be used to explicitly specify a context to use for overlap dialing extension matches, rather than forcibly using the context configured for the endpoint. ASTERISK-30262 #close Change-Id: Ibbcd4a8b11402428a187fb56b8d4e7408774a0db	2 years ago
Michael Kuron	841107f294	res_pjsip_aoc: New module for sending advice-of-charge with chan_pjsip ... chan_sip supported sending AOC-D and AOC-E information in SIP INFO messages in an "AOC" header in a format that was originally defined by Snom. In the meantime, ETSI TS 124 647 introduced an XML-based AOC format that is supported by devices from multiple vendors, including Snom phones with firmware >= 8.4.2 (released in 2010). This commit adds a new res_pjsip_aoc module that inserts AOC information into outgoing messages or sends SIP INFO messages as described below. It also fixes a small issue in res_pjsip_session which didn't always call session supplements on outgoing_response. * AOC-S in the 180/183/200 responses to an INVITE request * AOC-S in SIP INFO (if a 200 response has already been sent or if the INVITE was sent by Asterisk) * AOC-D in SIP INFO * AOC-D in the 200 response to a BYE request (if the client hangs up) * AOC-D in a BYE request (if Asterisk hangs up) * AOC-E in the 200 response to a BYE request (if the client hangs up) * AOC-E in a BYE request (if Asterisk hangs up) The specification defines one more, AOC-S in an INVITE request, which is not implemented here because it is not currently possible in Asterisk to have AOC data ready at this point in call setup. Once specifying AOC-S via the dialplan or passing it through from another SIP channel's INVITE is possible, that might be added. The SIP INFO requests are sent out immediately when the AOC indication is received. The others are inserted into an appropriate outgoing message whenever that is ready to be sent. In the latter case, the XML is stored in a channel variable at the time the AOC indication is received. Depending on where the AOC indications are coming from (e.g. PRI or AMI), it may not always be possible to guarantee that the AOC-E is available in time for the BYE. Successfully tested AOC-D and both variants of AOC-E with a Snom D735 running firmware 10.1.127.10. It does not appear to properly support AOC-S however, so that could only be tested by inspecting SIP traces. ASTERISK-21502 #close Reported-by: Matt Jordan <mjordan@digium.com> Change-Id: Iebb7ad0d5f88526bc6629d3a1f9f11665434d333	2 years ago
Henning Westerholt	7b2d3a6411	res_pjsip: return all codecs on a re-INVITE without SDP ... Currently chan_pjsip on receiving a re-INVITE without SDP will only return the codecs that are previously negotiated and not offering all enabled codecs. This causes interoperability issues with different equipment (e.g. from Cisco) for some of our customers and probably also in other scenarios involving 3PCC infrastructure. According to RFC 3261, section 14.2 we SHOULD return all codecs on a re-INVITE without SDP The PR proposes a new parameter to configure this behaviour: all_codecs_on_empty_reinvite. It includes the code, documentation, alembic migrations, CHANGES file and example configuration additions. ASTERISK-30193 #close Change-Id: I69763708d5039d512f391e296ee8a4d43a1e2148	3 years ago
Maximilian Fridrich	14826a8038	res_pjsip: Add mediasec capabilities. ... This patch adds support for mediasec SIP headers and SDP attributes. These are defined in RFC 3329, 3GPP TS 24.229 and draft-dawes-sipcore-mediasec-parameter. The new features are implemented so that a backbone for RFC 3329 is present to streamline future work on RFC 3329. With this patch, Asterisk can communicate with Deutsche Telekom trunks which require these fields. ASTERISK-30032 Change-Id: Ia7f5b5ba42db18074fdd5428c4e1838728586be2	3 years ago
Maximilian Fridrich	492c93861c	res_pjsip: Add 100rel option "peer_supported". ... This patch adds a new option to the 100rel parameter for pjsip endpoints called "peer_supported". When an endpoint with this option receives an incoming request and the request indicated support for the 100rel extension, then Asterisk will send 1xx responses reliably. If the request did not indicate 100rel support, Asterisk sends 1xx responses normally. ASTERISK-30158 Change-Id: Id6d95ffa8f00dab118e0b386146e99f254f287ad	3 years ago
Mike Bradeen	1b6227a6a8	alembic: add missing ps_endpoints columns ... The following required columns were missing, now added to the ps_endpoints table: incoming_call_offer_pref outgoing_call_offer_pref stir_shaken_profile ASTERISK-29453 Change-Id: I5cf565edf30195844d6acbc1e1de8c5f0d837568	3 years ago
George Joseph	1fa568e76f	Geolocation: chan_pjsip Capability Preview ... This commit adds res_pjsip_geolocation which gives chan_pjsip the ability to use the core geolocation capabilities. This commit message is intentionally short because this isn't a simple capability. See the documentation at https://wiki.asterisk.org/wiki/display/AST/Geolocation for more information. THE CAPABILITIES IMPLEMENTED HERE MAY CHANGE BASED ON USER FEEDBACK! ASTERISK-30128 Change-Id: Ie2e2bcd87243c2cfabc43eb823d4427c7086f4d9	3 years ago
Kevin Harwell	a3b2daf127	res_pjsip: allow TLS verification of wildcard cert-bearing servers ... Rightly the use of wildcards in certificates is disallowed in accordance with RFC5922. However, RFC2818 does make some allowances with regards to their use when using subject alt names with DNS name types. As such this patch creates a new setting for TLS transports called 'allow_wildcard_certs', which when it and 'verify_server' are both enabled allows DNS name types, as well as the common name that start with '*.' to match as a wildcard. For instance: *.example.com will match for: foo.example.com Partial matching is not allowed, e.g. f*.example.com, foo.*.com, etc... And the starting wildcard only matches for a single level. For instance: *.example.com will NOT match for: foo.bar.example.com The new setting is disabled by default. ASTERISK-30072 #close Change-Id: If0be3fdab2e09c2a66bb54824fca406ebaac3da4	3 years ago
Naveen Albert	31dc28ab09	res_pjsip_outbound_registration: Make max random delay configurable. ... Currently, PJSIP will randomly wait up to 10 seconds for each outbound registration's initial attempt. The reason for this is to avoid having all outbound registrations attempt to register simultaneously. This can create limitations with the test suite where we need to be able to receive inbound calls potentially within 10 seconds of starting up. For instance, we might register to another server and then try to receive a call through the registration, but if the registration hasn't happened yet, this will fail, and hence this inconsistent behavior can cause tests to fail. Ultimately, this requires a smaller random value because there may be no good reason to wait for up to 10 seconds in these circumstances. To address this, a new config option is introduced which makes this maximum delay configurable. This allows, for instance, this to be set to a very small value in test systems to ensure that registrations happen immediately without an unnecessary delay, and can be used more generally to control how "tight" the initial outbound registrations are. ASTERISK-29965 #close Change-Id: Iab989a8e94323e645f3a21cbb6082287c7b2f3fd	3 years ago
Mark Petersen	1cdaeb8161	chan_pjsip: add allow_sending_180_after_183 option ... added new global config option "allow_sending_180_after_183" that if enabled will preserve 180 after a 183 ASTERISK-29842 Change-Id: I8a53f8c35595b6d16d8e86e241b5f110d92f3d18	3 years ago
Alexei Gradinari	c12cb899de	res_pjsip_pubsub: provide a display name for RLS subscriptions ... Whereas BLFs allow to show a display name for each RLS entry, the asterisk provides only the extension now. This is not end user friendly. This commit adds a new resource_list option, resource_display_name, to indicate whether display name of resource or the resource name being provided for RLS entries. If this option is enabled, the Display Name will be provided. This option is disabled by default to remain the previous behavior. If the 'event' set to 'presence' or 'dialog' the non-empty HINT name will be set as the Display Name. The 'message-summary' is not supported yet. ASTERISK-29891 #close Change-Id: Ic5306bd5a7c73d03f5477fe235e9b0f41c69c681	3 years ago
Josh Soref	815e99d5ea	contrib: Spelling fixes ... Correct typos of the following word families: standard increase comments valgrind promiscuous editing libtonezone storage aggressive whitespace russellbryant consecutive peternixon ASTERISK-29714 Change-Id: I9cafbf41b579c9c0c84c81719d2c4f900beec245	4 years ago
Matthew Kern	5e9799a42e	res_pjsip_t38: bind UDPTL sessions like RTP ... In res_pjsip_sdp_rtp, the bind_rtp_to_media_address option and the fallback use of the transport's bind address solve problems sending media on systems that cannot send ipv4 packets on ipv6 sockets, and certain other situations. This change extends both of these behaviors to UDPTL sessions as well in res_pjsip_t38, to fix fax-specific problems on these systems, introducing a new option endpoint/t38_bind_udptl_to_media_address. ASTERISK-29402 Change-Id: I87220c0e9cdd2fe9d156846cb906debe08c63557	4 years ago
Joseph Nadiv	47cb177baf	res_pjsip_registrar: Remove unavailable contacts if exceeds max_contacts ... The behavior of max_contacts and remove_existing are connected. If remove_existing is enabled, the soonest expiring contacts are removed. This may occur when there is an unavailable contact. Similarly, when remove_existing is not enabled, registrations from good endpoints are rejected in favor of retaining unavailable contacts. This commit adds a new AOR option remove_unavailable, and the effect of this setting will depend on remove_existing. If remove_existing is set to no, we will still remove unavailable contacts when they exceed max_contacts, if there are any. If remove_existing is set to yes, we will prioritize the removal of unavailable contacts before those that are expiring soonest. ASTERISK-29525 Change-Id: Ia2711b08f2b4d1177411b1be23e970d7fdff5784	4 years ago
Sean Bright	4a843e00ef	res_pjsip.c: OPTIONS processing can now optionally skip authentication ... ASTERISK-27477 #close Change-Id: I68f6715bba92a525149e35d142a49377a34a1193	4 years ago
Sean Bright	8db2a34065	app_queue: Add alembic migration to add ringinuse to queue_members. ... ASTERISK-28356 #close Change-Id: I53a1bfdd3113d620bea88349019173a2f3f0ae39	4 years ago
Torrey Searle	888090ab18	res_pjsip_diversion: implement support for History-Info ... Implemention of History-Info capable of interworking with Diversion Header following RFC7544 ASTERISK-29027 #close Change-Id: I2296369582d4b295c5ea1e60bec391dd1d318fa6	5 years ago
Sungtae Kim	9052e448ec	realtime: Increased reg_server character size ... Currently, the ps_contacts table's reg_server column in realtime database type is varchar(20). This is fine for normal cases, but if the hostname is longer than 20, it returns error and then failed to register the contact address of the peer. Normally, 20 characters limitation for the hostname is fine, but with the cloud env. So, increased the size to 255. ASTERISK-29056 Change-Id: Iac52c8c35030303cfa551bb39f410b33bffc507d	5 years ago
George Joseph	a15e64aaf5	ACN: Configuration renaming for pjsip endpoint ... This change renames the codec preference endpoint options. incoming_offer_codec_prefs becomes codec_prefs_incoming_offer to keep the options together when showing an endpoint. Change-Id: I6202965b4723777f22a83afcbbafcdafb1d11c8d	5 years ago
Ben Ford	5fbed5af24	res_stir_shaken: Add stir_shaken option and general improvements. ... Added a new configuration option for PJSIP endpoints - stir_shaken. If set to yes, then STIR/SHAKEN support will be added to inbound and outbound INVITEs. The default is no. Alembic has been updated to include this option. Previously the dialplan function was not trimming the whitespace from the parameters it recieved. Now it does. Also added a conditional that, when TEST_FRAMEWORK is enabled, the timestamp in the identity header will be overlooked. This is just for testing, since the testsuite will rely on a SIPp scenario with a preset identity header to trigger the MISMATCH result. Change-Id: I43d67f1489b8c1c5729ed3ca8d71e35ddf438df1	5 years ago
George Joseph	2d22e34206	ACN: res_pjsip endpoint options ... This commit adds the endpoint options required to control Advanced Codec Negotiation. incoming_offer_codec_prefs outgoing_offer_codec_prefs incoming_answer_codec_prefs outgoing_answer_codec_prefs The documentation may need tweaking and some additional edits added, especially for the "answer" prefs. That'll be handled when things finalize. This commit is safe to merge as it doens't alter any existing functionality nor does it alter the previous codec negotiation work which may now be obsolete. Change-Id: I920ba925d7dd36430dfd2ebd9d82d23f123d0e11	5 years ago
sungtae kim	81b5e4a73f	res_pjsip.c: Added disable_rport option for pjsip.conf ... Currently when the pjsip making an outgoing request, it keep adding the rport parameter in a request message as a default. This causes unexpected rport handle at the other end. Added option for disable this behaviour in the pjsip.conf. This is a system option, but working as a gloabl option. ASTERISK-28959 Change-Id: I9596675e52a742774738b5aad5d1fec32f477abc	5 years ago
Rodrigo Ramírez Norambuena	48161dfc71	queue_log: Add alembic script for generate db table for queue_log ... Change-Id: I35b928a6251f9da9a1742b2cd14c63a00c3d0f0c	6 years ago
Sean Bright	966488ab52	res_musiconhold: Add new 'playlist' mode ... Allow the list of files to be played to be provided explicitly in the music class's configuration. The primary driver for this change is to allow URLs to be used for MoH. Change-Id: I9f43b80b43880980b18b2bee26ec09429d0b92fa	6 years ago
Dan Cropp	cffa2a74cb	res_pjsip: Added a norefersub configuration setting ... Added a new PJSIP global setting called norefersub. Default is true to keep support working as before. res_pjsip_refer: Configures PJSIP norefersub capability accordingly. Checks the PJSIP global setting value. If it is true (default) it adds the norefersub capability to PJSIP. If it is false (disabled) it does not add the norefersub capability to PJSIP. This is useful for Cisco switches that do not follow RFC4488. ASTERISK-28375 #close Reported-by: Dan Cropp Change-Id: I0b1c28ebc905d881f4a16e752715487a688b30e9	6 years ago
Ben Ford	4edd24841d	alembic: Fix errors during upgrade head. ... When trying to upgrade using alembic, a couple different errors kept popping up that prevented the upgrade. An additional parameter was needed when changing the schema for mwi_subscribe_replaces_unsolicited from an integer to an enum. When changing from a string to an enum, the type needed to be cast for postgresql. The other issue was a parameter being used during column creation that did not exist. After fixing the upgrade process, it revealed errors with the downgrade process. One was a variable not being defined in the downgrade function, and the other was tables not existing when using MySQL. This was due to a context check that should have encompassed MySQL, but in the end was not doing so. Change-Id: Ib4d70cf3ce5080023a50be496272a777b55d6c8e	6 years ago
Torrey Searle	4661c08549	chan_pjsip: add a flag to ignore 183 responses if no SDP present ... chan_sip will always ignore 183 responses that do not contain SDP however, chan_pjsip will currently always translate it into a 183 with SDP. This new flag allows chan_pjsip to have the same behavior as chan_sip. ASTERISK-28322 #close Change-Id: If81cfaa17c11b6ac703e3d71696f259d86c6be4a	6 years ago