to set the qualify frequency.
(closes issue #11597)
Reported by: wilder
Patches:
qualifyfreq5.patch uploaded by wilder (license 362)
-- with some mods by me
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@98027 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1) Add the Dialplan class, for NewExten and VarSet events, which should cut
down on the volume of traffic in the Call class.
2) Permit some commands to be run from multiple classes, such as allowing
DBGet to be run from either the System or the Reporting class.
3) Heavily document each class in the sample config, as there were several
that made no sense to be in the write= line, and two that made no sense to be
in the read= line (since they controlled no permissions there).
(Closes issue #10386)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@97651 65c4cc65-6c06-0410-ace0-fbb531ad65f3
based on configuration templates that use Asterisk dialplan function and
variable substitution. It should be possible to create phone profiles and
templates that work for the majority of phones provisioned over http. It
is currently only intended to provision a single user account per phone.
An example profile and set of templates for Polycom phones is provided.
NOTE: Polycom firmware is not included, but should be placed in
AST_DATA_DIR/phoneprov/configs to match up with the included templates.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@97634 65c4cc65-6c06-0410-ace0-fbb531ad65f3
will monitor this second device's state for the member, even though it actually calls the first
interface. This ability has been added for statically defined queue members, realtime queue members,
and dynamic queue members added through the CLI, dialplan, or manager.
(closes issue #11603, reported by acidv)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@97203 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit imports libresample for use in Asterisk. It also adds a new codec
module, codec_resample. This module uses libresample to re-sample signed linear
audio between 8 kHz and 16 kHz.
It also provides an alternative for converting between 16 kHz G.722 and 8 kHz
signed linear when using G.722, which will likely be useful as some people have
complained about volume issues when the current codec_g722 converts to 8 kHz
signed linear. But, to test this, you will have to disable the g722-to-slin and
g722-to-slin16 translators in codec_g722.c.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@95501 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Add a new console channel driver, chan_console, which is a console channel
driver that uses portaudio as a cross platform audio interface. It was written
to provide a console channel driver that works with Mac CoreAudio, but it
supports a number of other audio interfaces, as well, including OSS and ALSA.
It could one day be the single console channel driver, but does not yet have
as many features as chan_oss.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@95412 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The channel name is printed in verbose messages
maximumWordLength option added.
Duration of words that do not meet the minimum word duration will be logged
The duration of pre-greeting silence will be logged
Only consider us in the greeting if we actually detected a valid word duration.
(closes issue #11650, reported and patched by davevg)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@95167 65c4cc65-6c06-0410-ace0-fbb531ad65f3
the existence of a dialplan target.
(closes issue #11579)
Reported by: irroot
Patches:
func_dialplan2.c uploaded by irroot (license 52)
-- Additional changes by me.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@94799 65c4cc65-6c06-0410-ace0-fbb531ad65f3
by adding an exclamation mark to the dial string.
This patch also exists for 1.4 in the fixtoheader-1.4 branch
and has been in production for quite some time.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@93897 65c4cc65-6c06-0410-ace0-fbb531ad65f3
you need to reload after changes. Thanks YS.
Reported by: ys
Patches:
trunk93163_manager_reload.c.diff uploaded by ys (license 281)
(related to issue #11414)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@93166 65c4cc65-6c06-0410-ace0-fbb531ad65f3
manager realtime implementation.
If you change accounts in manager.conf, you now need to reload to activate the
changes (deletions, additions). This was not the case with 1.4.
Reported by: ys
Patches:
trunk93163_manager_reload.c.diff uploaded by ys (license 281)
(closes issue #11414)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@93165 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Refer to the proper documentation
- Implement separate signalling/media QoS/CoS in many channels using RTP
- Improve warnings and verbose messages
- Deprecate some old settings
Minor modifications by me, a big effort from IgorG.
Thanks!
Reported by: IgorG
Patches:
qoscleanup-89394-4-trunk.patch uploaded by IgorG (license 20)
Tested by: IgorG
(closes issue #11145)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@93163 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Thanks, eliel, for writing the original patch. Modified by me to follow
other manager events and the new "moremanager" style.
(closes issue #11478)
Reported by: eliel
Patches:
manager.c.patch uploaded by eliel (license 64)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@91347 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This introduces two new options for zapata.conf: mwimonitor and mwimonitornotify.
The mwimonitor option enables MWI monitoring. When the MWI state on a line changes,
then the script specified by mwimonitornotify will be executed for custom handling
of the state change, similar to the externnotify option of voicemail.conf.
Also, when the MWI state on an FXO line changes, an internal Asterisk event is
generated to indicate the new state of the associated mailbox. That may, any
module that cares about MWI information will get notified and can handle it
just as if app_voicemail had sent this notification.
(BE-253, original patch from markster, with some minor modifications by me to
add comments, documentation, and internal event support)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@90949 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1. When moh is started, we search first in memory to find the class. If we do not
find it in memory, we search realtime instead.
2. When moh is restarted (as in, it had been started on this particular channel, stopped,
and now we're starting it again), if using the "files" mode, then realtime will always
be rechecked. If you are using other modes, however, we will simply reattach to the external
running process which was playing moh earlier in the call. This is a necessary compromise so that
we don't end up with too many background processes.
3. musiconhold.conf has a general section now. It has one option: cachertclasses. If set to yes,
then moh classes found in realtime will be added to the in-memory list. This has the advantage
of not requiring database lookups each time moh is started, but it has the disadvantage of not
truly being realtime.
I have tested this for functionality, and it passes. I also tested this under valgrind and there
are no memory problems reported under typical use.
Special thanks to Sergee for implementing this feature and enduring my complaints on the bugtracker!
(closes issue #11196, reported and patched by sergee)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89946 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Restructure other changes to UPGRADE.txt and CHANGES
We're still looking for scripts that replace
asterisk -rx "show shannels concise"
by using the manager interface, but still produces the same output.
Anyone?
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89606 65c4cc65-6c06-0410-ace0-fbb531ad65f3
and we now have the groupcount system to implement call-limits in the dialplan. You
can use the "setvar" option in realtime/sip.conf to set limits per device.
- Implement "callcounter" as a new option to enable the call counting we need to
report device status to queue, manager and SIP subscriptions.
The call counter setting is now enabled in the code by setting the device call-limit
to 999. When we remove the call limit, we can simply enable this with a boolean
setting.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89554 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Added the ability to specify the music on hold class used to play into the
conference when there is only one member and the M option is used.
* Added the ability to specify a music on hold class to play instead of ringing
for the SLATrunk application.
(patched by me, and tested internally)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89470 65c4cc65-6c06-0410-ace0-fbb531ad65f3
with the SIPPEER() argument of the same name. The deprecation procedure is not
being used here since this is a trunk-only option.
(closes issue #11307, reported by pj, patched by me)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89441 65c4cc65-6c06-0410-ace0-fbb531ad65f3
parked extension is provided as an argument.
(closes issue #10803)
Reported by: outtolunc
Patches:
res_features-parkedcall-any.diff4 uploaded by outtolunc (license 237)
- modified by me to work a bit differently ...
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89250 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This extends the concise capabilities of this CLI command to include
listing all conferences, instead of an addition to the other sub commands
for the "meetme" command.
(closes issue #11078)
Reported by: jthomas
Patches:
meetme-concise.patch uploaded by jthomas (license 293)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89073 65c4cc65-6c06-0410-ace0-fbb531ad65f3
much identical to the S() and L() options to Dial(). They let you set
timeouts for the conference, as well as have warning sounds played to
let the caller know how much time is left, and when it is running out.
(closes issue #8030)
Reported by: areski
Patches:
meetme_timeout_timelimit_v2.patch uploaded by areski (license 29)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89069 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This introduces a new channel driver, chan_unistim, that supports the Unistim
VoIP protocol for Nortel phones. The following models have been confirmed
to work: i2002, i2004 and i2050.
(closes issue #8864)
Reported by: c_hans
Patches:
chan_unistim.patch uploaded by c (license 304)
ustm_no_conf.diff uploaded by junky (license 177)
Tested by: c_hans, dbowerman, math, junky, loloski
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@88368 65c4cc65-6c06-0410-ace0-fbb531ad65f3
It allows you to configure a prefix for auto-monitor recordings.
(closes issue #6353)
Reported by: ivanfm
Patches:
asterisk_automon_v4.patch uploaded by ivanfm (original patch)
- updated patch:
6353-touch_monitor_prefix.diff uploaded by qwell (license 4)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@85682 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: junky
Patches:
register_trying.diff.txt uploaded by jcmoore
Disable sending 100 Trying on REGISTER attempts and make it an option. This has been signed off by oej.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@82257 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: jmls
Patches:
pbx.diff uploaded by jmls (license 141)
Add REASON dialplan variable for when an originated call fails and the failed extension is executed.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@81372 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: nic_bellamy
Patches:
2006-10-03_svn_44249_voicemail_lockmode_v3.patch uploaded by nic_bellamy (license 213)
Add support for configurable file locking methods. The default is "lockfile",
which is the old behavior. There is an additional option, "flock", which is
intended for use in situations where the lockfile method will not work, such as
with SMB/CIFS mounts.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@81233 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This feature may be turned on by adding imapgreetings=yes to the general section of voicemail.conf
voicemail.conf.sample has details on the options added.
As a result, IMAP storage now has RETRIEVE and DISPOSE macros defined.
In addition to the IMAP greeting changes, I also have added an enum for the voicemail folders
and so now the code should be easier to understand and maintain when it comes to this area.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@72232 65c4cc65-6c06-0410-ace0-fbb531ad65f3
features.conf. This allows you to create a feature one time, and then map it
into groups for various different key mappings for the same feature, as well
as easy access control to groups of features.
(patch from bbryant)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@66774 65c4cc65-6c06-0410-ace0-fbb531ad65f3
class in musiconhold.conf, a caller on hold may press this digit to switch
to listening to that music class.
This involved adding a new callback for generators, which allow generators
to get notified of DTMF from the channel they are running on. Then, a callback
was implemented for the music on hold generators.
(patch from bbryant)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@65505 65c4cc65-6c06-0410-ace0-fbb531ad65f3
except it lets you operate on a channel by name instead of conference member
number. It is very useful in combination with the 'X' option to ChanSpy.
(issue #9671, patch by mnicholson, with some small modifications by me)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@63319 65c4cc65-6c06-0410-ace0-fbb531ad65f3
created will now be stored. Then, every channel that joins the conference will
have the MEETMEUNIQUEID channel variable set with this ID. This can be used to
relate callers that come and go from long standing conferences.
(issue #7295, patch by softins)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@62794 65c4cc65-6c06-0410-ace0-fbb531ad65f3
NOT_INUSE or INUSE when Local channels are in use as opposed to just UNKNOWN.
It will still return INVALID if the extension doesn't exist at all.
(issue #8048, patch from tim_ringenbach)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@62673 65c4cc65-6c06-0410-ace0-fbb531ad65f3
entries in the queue log.
(issue #7561, reported and originally patched by fkasumovic, patch slightly
modified and updated to trunk by me)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@62462 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This set of changes introduces a new generic event API for use within Asterisk.
I am still working on a way for events to be shared between servers, but this
part is ready and can already be used inside of Asterisk.
This set of changes introduces the first use of the API, as well. I have
restructured the way that MWI (message waiting indication) is handled. It is
now event based instead of polling based. For example, if there are a bunch
of SIP phones subscribed to mailboxes, then chan_sip will not have to
constantly poll the mailboxes for changes. app_voicemail will generate events
when changes occur.
See UPGRADE.txt and CHANGES for some more information on the effects of these
changes from the user perspective. For developer information, see the text in
include/asterisk/event.h.
As always, additional feedback is welcome on the asterisk-dev mailing list.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@62292 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This introduces two new dialplan functions: DUNDIQUERY and DUNDIRESULT.
DUNDIQUERY lets you intitiate a DUNDi query from the dialplan. Then,
DUNDIRESULT will let you find out how many results there are, and access each
one without having to the query again.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@62267 65c4cc65-6c06-0410-ace0-fbb531ad65f3
minimum amount of time between queue announcements for use when the caller's queue
position changes frequently.
(issue #9604, patch by Matthew Roth)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@62242 65c4cc65-6c06-0410-ace0-fbb531ad65f3
"ChannelDriver" and "Channel", previously used to indicate channel driver. ChannelType is more
in line with "core show channeltypes"
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@60987 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Add new module, cdr_sqlite3_custom which allows logging custom CDRs into a
SQLite3 database. (issue #7149, alerios)
* Add new module, res_config_sqlite, which adds realtime database configuration
support for SQLite version 2. I decided that this was ok since we didn't have
any realtime support for version 3. If someone ports this to version 3, then
version 2 support can be removed or marked deprecated.
(issue #7790, rbarun_proformatique)
* Mark cdr_sqlite as deprecated in favor of cdr_sqlite3_custom.
Also, note that there were other modules on the bug tracker that did not make
the cut because they provided some duplicated functionality. Those are:
* cdr_sqlite3 (issue #6754, moy)
* cdr_sqlite3 (issue #8694, bsd)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@58866 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This can be done using a global variable or a dialplan function. Using the
SHELL() function will allow you to use an external script to determine what the
weight in the response should be. This can be very useful in load balancing
applications.
(inspired by discussions with blitzrage and jsmith in #asterisk-bugs)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@58304 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Russell Bryant
Tilghman Lesher
Terry Wilson
Mark Michelson
Kevin P. Fleming
Luigi Rizzo
Olle Johansson
Jason Parker
Joshua Colp
Steve Murphy