Most issues were in stringfields and had to do with comparing
a pointer to an constant/interned string with NULL. Since the
string was a constant, a pointer to it could never be NULL so
the comparison was always "true". gcc now complains about that.
There were also a few issues where determining if there was
enough space for a memcpy or s(n)printf which were fixed
by defining some of the involved variables as "volatile".
There were also a few other miscellaneous fixes.
ASTERISK-30044
Change-Id: Ia081ca1bcfb329df6487c4660aaf1944309eb570
This adds the EVAL_EXTEN function, which may be used to retrieve
the variable-substituted data at any extension.
ASTERISK-29486
Change-Id: Iad81019689674c9f4ac77d235f5d7234adbb1432
added new global config option "allow_sending_180_after_183"
that if enabled will preserve 180 after a 183
ASTERISK-29842
Change-Id: I8a53f8c35595b6d16d8e86e241b5f110d92f3d18
Add framework to connect to, and read and write protocol based
messages from and to an external application using an Asterisk
External Application Protocol (AEAP). This has been divided into
several abstractions:
1. transport - base communication layer (currently websocket only)
2. message - AEAP description and data (currently JSON only)
3. transaction - links/binds requests and responses
4. aeap - transport, message, and transaction handler/manager
This patch also adds an AEAP implementation for speech to text.
Existing speech API callbacks for speech to text have been completed
making it possible for Asterisk to connect to a configured external
translator service and provide audio for STT. Results can also be
received from the external translator, and made available as speech
results in Asterisk.
Unit tests have also been created that test the AEAP framework, and
also the speech to text implementation.
ASTERISK-29726 #close
Change-Id: Iaa4b259f84aa63501e5fd2a6fb107f900b4d4ed2
Adds a new configuration option, stir_shaken_profile, in pjsip.conf that
can be specified on a per endpoint basis. This option will reference a
stir_shaken_profile that can be configured in stir_shaken.conf. The type
of this option must be 'profile'. The stir_shaken option can be
specified on this object with the same values as before (attest, verify,
on), but it cannot be off since having the profile itself implies wanting
STIR/SHAKEN support. You can also specify an ACL from acl.conf (along
with permit and deny lines in the object itself) that will be used to
limit what interfaces Asterisk will attempt to retrieve information from
when reading the Identity header.
ASTERISK-29476
Change-Id: I87fa61f78a9ea0cd42530691a30da3c781842406
Treat time_t's as entirely unique and use the POSIX API's for
converting to/from strings.
Lastly, a 64-bit integer formats as 20 digits at most in base10.
Don't need to have any 100 byte buffers to hold that.
ASTERISK-29674 #close
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Change-Id: Id7b25bdca8f92e34229f6454f6c3e500f2cd6f56
Added functions to open, close, and apply XML Stylesheets
to XML documents. Although the presence of libxslt was already
being checked by configure, it was only happening if xmldoc was
enabled. Now it's checked regardless.
Added ability to parse a string consisting of comma separated
name/value pairs into an ast_variable list. The reverse of
ast_variable_list_join().
Change-Id: I1e1d149be22165a1fb8e88e2903a36bba1a6cf2e
Added:
Replace a variable in a list:
int ast_variable_list_replace_variable(struct ast_variable **head,
struct ast_variable *old, struct ast_variable *new);
Added test as well.
Create a "name=value" string from a variable list:
'name1="val1",name2="val2"', etc.
struct ast_str *ast_variable_list_join(
const struct ast_variable *head, const char *item_separator,
const char *name_value_separator, const char *quote_char,
struct ast_str **str);
Added test as well.
Allow the name of an XML element to be changed.
void ast_xml_set_name(struct ast_xml_node *node, const char *name);
Change-Id: I330a5f63dc0c218e0d8dfc0745948d2812141ccb
Adds the lastcontext and lastexten channel fields to allow users
to access previous dialplan execution locations.
ASTERISK-29840 #close
Change-Id: Ib455fe300cc8e9a127686896ee2d0bd11e900307
Currently, each module that uses libcurl duplicates the standard
Asterisk curl user agent.
This adds a global macro for the Asterisk user agent used for
curl requests to eliminate this duplication.
ASTERISK-29861 #close
Change-Id: I9fc37935980384b4daf96ae54fa3c9adb962ed2d
Whereas BLFs allow to show a display name for each RLS entry,
the asterisk provides only the extension now.
This is not end user friendly.
This commit adds a new resource_list option, resource_display_name,
to indicate whether display name of resource or the resource name being
provided for RLS entries.
If this option is enabled, the Display Name will be provided.
This option is disabled by default to remain the previous behavior.
If the 'event' set to 'presence' or 'dialog' the non-empty HINT name
will be set as the Display Name.
The 'message-summary' is not supported yet.
ASTERISK-29891 #close
Change-Id: Ic5306bd5a7c73d03f5477fe235e9b0f41c69c681
Adds a new option, defaultenabled, to the CDR core to
control whether or not CDR is enabled on a newly created
channel. This allows CDR to be disabled by default on
new channels and require the user to explicitly enable
CDR if desired. Existing behavior remains unchanged.
ASTERISK-29808 #close
Change-Id: Ibb78c11974bda229bbb7004b64761980e0b2c6d1
Previously there was no way to specify a connection timeout when
attempting to connect a websocket client to a server. This patch
makes it possible to now do such.
Change-Id: I5812f6f28d3d13adbc246517f87af177fa20ee9d
autoconfigh.h.in was missed in the original review for this
issue. Additionally it looks like I have newer pkg-config autoconf
macros on my development machine.
ASTERISK-29817
Change-Id: I3c85a4de82c5d7d6e0e23dad4c33bb650a86a57b
sched: Avoid a double deref when AST_SCHED_DEL_UNREF is called on an
executing call-back. This is done by adding a new variable 'rescheduled'
to the struct sched which is set in ast_sched_runq and checked in
ast_sched_del_nonrunning. ast_sched_del_nonrunning is a replacement for
now deprecated ast_sched_del which returns a new possible value -2
if called on an executing call-back with rescheduled set. ast_sched_del
is modified to call ast_sched_del_nonrunning to maintain existing code.
AST_SCHED_DEL_UNREF is also updated to look for the -2 in which case it
will not throw a warning or invoke refcall.
test_sched: Add a new unit test sched_test_freebird that will check the
reference count in the resolved scenario.
ASTERISK-29698
Change-Id: Icfb16b3acbc29cf5b4cef74183f7531caaefe21d
Remove the HMAC declarations from the includes. They are
not implemented nor used anywhere, and their presence breaks the build
on NetBSD that delivers an incompatible hmac() function in <stdlib.h>.
ASTERISK-29818
Change-Id: I0c4b88645e30174b1b63846a6b328625b69c2ea7
Added two new functions to assist checking media types...
* ast_sip_are_media_types_equal compares two pjsip_media_types.
* ast_sip_is_media_type_in tests if one media type is in a list
of others.
Added static definitions for commonly used media types to
res_pjsip.h.
Changed several modules to use the new functions and static
definitions.
ASTERISK_29813
(not ready to close)
Change-Id: Ief77675235bd3bf00a6b095d4673fd878d0801b9
There are times when you need to troubleshoot issues with bundled
pjproject or add new features that need to be pushed upstream
but...
* The source directory created by extracting the pjproject tarball
is not scanned for code changes so you have to keep forcing
rebuilds.
* The source directory isn't a git repo so you can't easily create
patches, do git bisects, etc.
* Accidentally doing a make distclean will ruin your day by wiping
out the source directory, and your changes.
* etc.
This commit makes that easier.
See third-party/pjproject/README-hacking.md for the details.
ASTERISK-29824
Change-Id: Idb1251040affdab31d27cd272dda68676da9b268
The current TCP client connect code, blocks and does not handle EINTR
error case.
This patch makes the client socket non-blocking while connecting,
ensures a connect does not immediately fail due to EINTR "errors",
and adds a connect timeout option.
The original client start call sets the new timeout option to
"infinite", thus making sure old, orginal behavior is retained.
ASTERISK-29746 #close
Change-Id: I907571843a83e43c0742b95a64785f4411f02671
Adds tech-agnostic support for SF signaling
by adding SF sender and receiver applications
as well as Dial integration.
ASTERISK-29802 #close
Change-Id: I7ec50752e9a661af639425e5d1e339f17411bcad
Previously, it was only possible to have one HTTP server in Asterisk.
With this patch it is now possible to have multiple HTTP servers
listening on different addresses.
Note, this behavior has only been made available through an API call
from within the TEST_FRAMEWORK. Specifically, this feature has been
added in order to allow unit test to create/start and stop servers,
if one has not been enabled through configuration.
Change-Id: Ic5fb5f11e62c019a1c51310f4667b32a4dae52f5
The enum values for ast_strsep_flags includes
AST_STRSEP_STRIP. However, some comments reference
AST_SEP_STRIP, which doesn't exist. This fixes
these comments to use the correct value.
ASTERISK-29800 #close
Change-Id: If7bbd0c0e6226a211d25ddf9d1629347e2674943
Currently, variable substitution involving dialplan
extensions is quite clunky since it entails obtaining
the current dialplan location, backing it up, storing
the desired variables for substitution on the channel,
performing substitution, then restoring the original
location.
In addition to being clunky, things could also go wrong
if an async goto were to occur and change the dialplan
location during a substitution.
Fundamentally, there's no reason it needs to be done this
way, so new API is added to allow for directly passing in
the dialplan location for the purposes of variable
substitution so we don't need to mess with the channel
information anymore. Existing API is not changed.
ASTERISK-29745 #close
Change-Id: I23273bf27fa0efb64a606eebf9aa8e2f41a065e4
Adds tech-agnostic support for MF signaling by adding
MF sender and receiver applications as well as Dial
integration.
ASTERISK-29496-mf #do-not-close
Change-Id: I61962b359b8ec4cfd05df877ddf9f5b8f71927a4
Since Doxygen 1.8.16, a special comment block is required. Otherwise
(pure C comment), the group command is ignored. Additionally, several
unbalanced group commands were fixed.
ASTERISK-29732
Change-Id: I4687857b9d56e6f44fd440b73af156691660202e
Refactors generic functions used for email generation
into utils.c so that they can be used by multiple
modules, including app_voicemail and app_minivm,
to avoid code duplication.
ASTERISK-29715 #close
Change-Id: I1de0ed3483623e9599711129edc817c45ad237ee
This avoids a few long-name overflows, at the cost of less instructive
names in the case of C++ (specifically overloaded functions and class
methods). This in turn is offset against the fact that we're logging
the filename and line numbers in any case.
Change-Id: I54101a0bb5f8cb9ef63ec12c5e0d4c8edafff9ed
Signed-off-by: Jaco Kroon <jaco@uls.co.za>
Fixes four misuses of the parameter 'name'. Additionally, for
consistency and to avoid such an issue in future, those few other
places, which used '\file name', were changed just to '\file'. Then,
Doxygen uses the name of the current file.
ASTERISK-29733
Change-Id: I0c18b4c863c6988b138c77448057349a9ee7052d
Add a function to check if there is an exact match a one string between
delimiters in another string.
Add a function that will create an ast_json object out of a list of
Asterisk variables. An excludes string can also optionally be passed
in.
Also, add a macro to make it easier to get object integers.
Change-Id: I5f34f18e102126aef3997f19a553a266d70d6226
The stir_shaken configuration option now has 4 different choices to pick
from: off, attest, verify, and on. Off and on behave the same way they
do now. Attest will only perform attestation on the endpoint, and verify
will only perform verification on the endpoint.
Certain responses are required to be sent based on certain conditions
for STIR/SHAKEN. For example, if we get a Date header that is outside of
the time range that is considered valid, a 403 Stale Date response
should be sent. This and several other responses have been added.
Change-Id: I4ac1ecf652cd0e336006b0ca638dc826b5b1ebf7
Add a new function that converts a speech results type to a string.
Also add another function to unregister an engine, but returns a
pointer to the unregistered engine object instead of a success/fail
integer.
Change-Id: I0f7de17cb411021c09fb03988bc2b904e1380192
OpenSSL is one of those packages that often have alternatives
with later versions. For instance, CentOS/EL 7 has an
openssl package at version 1.0.2 but there's an openssl11
package from the epel repository that has 1.1.1. This gets
installed to /usr/include/openssl11 and /usr/lib64/openssl11.
Unfortunately, the existing --with-ssl and --with-crypto
./configure options expect to point to a source tree and
don't work in this situation. Also unfortunately, the
checks in ./configure don't use pkg-config.
In order to make this work with the existing situation, you'd
have to run...
./configure --with-ssl=/usr/lib64/openssl11 \
--with-crypto=/usr/lib64/openssl11 \
CFLAGS=-I/usr/include/openssl11
BUT... those options don't get passed down to bundled pjproject
so when you run make, you have to include the CFLAGS again
which is a big pain.
Oh... To make matters worse, although you can specify
PJPROJECT_CONFIGURE_OPTS on the ./configure command line,
they don't get saved so if you do a make clean, which will
force a re-configure of bundled pjproject, those options
don't get used.
So...
* In configure.ac... Since pkg-config is installed by install_prereq
anyway, we now use it to check for the system openssl >= 1.1.0.
If that works, great. If not, we check for the openssl11
package. If that works, great. If not, we fall back to just
checking for any openssl. If pkg-config isn't installed for some
reason, or --with-ssl=<dir> or --with-crypto=<dir> were specified
on the ./configure command line, we fall back to the existing
logic that uses AST_EXT_LIB_CHECK().
* The whole OpenSSL check process has been moved up before
THIRD_PARTY_CONFIGURE(), which does the initial pjproject
bundled configure, is run. This way the results of the above
checks, which may result in new include or library directories,
is included.
* Although not strictly needed for openssl, We now save the value of
PJPROJECT_CONFIGURE_OPTS in the makeopts file so it can be used
again if a re-configure is triggered.
ASTERISK-29693
Change-Id: I341ab7603e6b156aa15a66f43675ac5029d5fbde
Discovered while looking at ASTERISK~29684. Usage was removed in change
I3c77c7b00b2ffa2e935632097fa057b9fdf480c0.
Change-Id: Iaf2f7a16ea5a7eee6375319347e4b40b8e7b10e3
In res_pjsip_sdp_rtp, the bind_rtp_to_media_address option and the
fallback use of the transport's bind address solve problems sending
media on systems that cannot send ipv4 packets on ipv6 sockets, and
certain other situations. This change extends both of these behaviors
to UDPTL sessions as well in res_pjsip_t38, to fix fax-specific
problems on these systems, introducing a new option
endpoint/t38_bind_udptl_to_media_address.
ASTERISK-29402
Change-Id: I87220c0e9cdd2fe9d156846cb906debe08c63557
The behavior of max_contacts and remove_existing are connected. If
remove_existing is enabled, the soonest expiring contacts are removed.
This may occur when there is an unavailable contact. Similarly,
when remove_existing is not enabled, registrations from good
endpoints are rejected in favor of retaining unavailable contacts.
This commit adds a new AOR option remove_unavailable, and the effect
of this setting will depend on remove_existing. If remove_existing
is set to no, we will still remove unavailable contacts when they
exceed max_contacts, if there are any. If remove_existing is set to
yes, we will prioritize the removal of unavailable contacts before
those that are expiring soonest.
ASTERISK-29525
Change-Id: Ia2711b08f2b4d1177411b1be23e970d7fdff5784
Adds the ability for users to log to custom log levels
by providing custom log level names in logger.conf. Also
adds a logger show levels CLI command.
ASTERISK-29529
Change-Id: If082703cf81a436ae5a565c75225fa8c0554b702
Adds parsing of ANI II digits (Originating
Line Information) to PJSIP, on par with
what currently exists in chan_sip.
ASTERISK-29472
Change-Id: Ifc938a7a7d45ce33999ebf3656a542226f6d3847
Up until now, all of the logic used to translate
arguments to the Say applications has been
directly coupled to playback, preventing other
modules from using this logic.
This refactors code in say.c and adds a SAYFILES
function that can be used to retrieve the file
names that would be played. These can then be
used in other applications or for other purposes.
Additionally, a SayMoney application and a SayOrdinal
application are added. Both SayOrdinal and SayNumber
are also expanded to support integers greater than
one billion.
ASTERISK-29531
Change-Id: If9718c89353b8e153d84add3cc4637b79585db19
dsp.c contains arbitrary tone detection functionality
which is currently only used for fax tone recognition.
This change makes this functionality publicly
accessible so that other modules can take advantage
of this.
Additionally, a WaitForTone and TONE_DETECT app and
function are included to allow users to do their
own tone detection operations in the dialplan.
ASTERISK-29546
Change-Id: Ie38c395000f4fd4d04e942e8658e177f8f499b26
IPv6 nameserver addresses are stored in different part of the
__res_state structure, so look there if we appear to have support for
it.
ASTERISK-28004 #close
Change-Id: I67067077d8a406ee996664518d9c8fbf11f6977d
Allows for the digit # to be read as a digit,
just like any other DTMF digit, as opposed to
forcing it to be used as an end of input
indicator. The default behavior remains
unchanged.
ASTERISK-18454 #close
Change-Id: I3033432adb9d296ad227e76b540b8b4a2417665b
Meter types are not well supported,
lacking support in telegraf, datadog and the official statsd servers.
We deprecate meters and provide a compliant fallback for any existing usages.
A flag has been introduced to allow meters to fallback to counters.
ASTERISK-29513
Change-Id: I5fcb385983a1b88f03696ff30a26b55c546a1dd7
When we try to play a list of sound files in the same Play command,
we get only one PlaybackFinish event, after all sounds are played.
But in the case where the Play fails (because channel is destroyed
for example), Asterisk will send one PlaybackFinish event for each
sound file still to be played. If the list is big, Asterisk is
sending many events.
This patch adds a failed state so we can understand that the play
failed. On that case we don't send the event, if we still have a
list of sounds to be played.
When we reach the last sound, we send the PlaybackFinish with
the failed state.
ASTERISK-29464 #close
Change-Id: I4c2e5921cc597702513af0d7c6c2c982e1798322
When using the Busy() and Congestion() applications the
function ast_safe_sleep is used by wait_for_hangup to safely
wait on the channel. This function may send silence if Asterisk
is configured to do so using the transmit_silence option.
In a scenario where an answered channel dials a Local channel
either directly or through call forwarding and the Busy()
or Congestion() dialplan applications were executed with the
transmit_silence option enabled the busy or congestion
tone would not be heard.
This is because inband generation of tones (such as busy
and congestion) is stopped when other audio is sent to
the channel they are being played to. In the given
scenario the transmit_silence option would result in
silence being sent to the channel, thus stopping the
inband generation.
This change adds a variant of ast_safe_sleep which can be
used when silence should not be played to the channel. The
wait_for_hangup function has been updated to use this
resulting in the tones being generated as expected.
ASTERISK-29485
Change-Id: I066bfc987a3ad6f0ccc88e0af4cd63f6a4729133
STIR/SHAKEN requires a Date header alongside the Identity header, so
that has been added. Still on the outgoing side, we were missing the
dest->tn section of the JSON payload, so that has been added as well.
Moving to the incoming side, URL checking has been added to the public
cert URL to ensure that it starts with http.
https://wiki.asterisk.org/wiki/display/AST/OpenSIPit+2021
Change-Id: Idee5b1b5e45bc3b483b3070e46ce322dca5b3f1c
RFC7616 and RFC8760 allow more than one WWW-Authenticate or
Proxy-Authenticate header per realm, each with different digest
algorithms (including new ones like SHA-256 and SHA-512-256).
Thankfully however a UAS can NOT send back multiple Authenticate
headers for the same realm with the same digest algorithm. The
UAS is also supposed to send the headers in order of preference
with the first one being the most preferred. We're supposed to
send an Authorization header for the first one we encounter for a
realm that we can support.
The UAS can also send multiple realms, especially when it's a
proxy that has forked the request in which case the proxy will
aggregate all of the Authenticate headers and then send them all
back to the UAC.
It doesn't stop there though... Each realm can require a
different username from the others. There's also nothing
preventing each digest algorithm from having a unique password
although I'm not sure if that adds any benefit.
So now... For each Authenticate header we encounter, we have to
determine if we support the digest algorithm and, if not, just
skip the header. We then have to find an auth object that
matches the realm AND the digest algorithm or find a wildcard
object that matches the digest algorithm. If we find one, we add
it to the results vector and read the next Authenticate header.
If the next header is for the same realm AND we already added an
auth object for that realm, we skip the header. Otherwise we
repeat the process for the next header.
In the end, we'll have accumulated a list of credentials we can
pass to pjproject that it can use to add Authentication headers
to a request.
NOTE: Neither we nor pjproject can currently handle digest
algorithms other than MD5. We don't even have a place for it in
the ast_sip_auth object. For this reason, we just skip processing
any Authenticate header that's not MD5. When we support the
others, we'll move the check into the loop that searches the
objects.
Changes:
* Added a new API ast_sip_retrieve_auths_vector() that takes in
a vector of auth ids (usually supplied on a call to
ast_sip_create_request_with_auth()) and populates another
vector with the actual objects.
* Refactored res_pjsip_outbound_authenticator_digest to handle
multiple Authenticate headers and set the stage for handling
additional digest algorithms.
* Added a pjproject patch that allows them to ignore digest
algorithms they don't support. This patch has already been
merged upstream.
* Updated documentation for auth objects in the XML and
in pjsip.conf.sample.
* Although res_pjsip_authenticator_digest isn't affected
by this change, some debugging and a testsuite AMI event
was added to facilitate testing.
Discovered during OpenSIPit 2021.
ASTERISK-29397
Change-Id: I3aef5ce4fe1d27e48d61268520f284d15d650281
Although Asterisk can receive and propogate flash events, it currently
provides no mechanism for doing anything with them itself.
This AMI event allows flash events to be processed by Asterisk.
Additionally, AST_CONTROL_FLASH is included in a switch statement
in channel.c to avoid throwing a warning when we shouldn't.
ASTERISK-29380
Change-Id: Ie17ffe65086e0282c88542e38eed6a461ec79e81
STIR/SHAKEN encodes using base64 URL format. Currently, we just use
base64. New functions have been added that convert to and from base64
encoding.
The origid field should also be an UUID. This means there's no reason to
have it as an option in stir_shaken.conf, as we can simply generate one
when creating the Identity header.
https://wiki.asterisk.org/wiki/display/AST/OpenSIPit+2021
Change-Id: Icf094a2a54e87db91d6b12244c9f5ba4fc2e0b8c
During OpenSIPit, we found out that the public certificates must be of
type X.509. When reading in public keys, we use the corresponding X.509
functions now.
We also discovered that we needed a better naming scheme for the
certificates since certificates with the same name would cause issues
(overwriting certs, etc.). Now when we download a public certificate, we
get the serial number from it and use that as the name of the cached
certificate.
The configuration option public_key_url in stir_shaken.conf has also
been renamed to public_cert_url, which better describes what the option
is for.
https://wiki.asterisk.org/wiki/display/AST/OpenSIPit+2021
Change-Id: Ia00b20835f5f976e3603797f2f2fb19672d8114d
Added a TIME_UNIT enumeration, and a function that converts a
string to one of the enumerated values. Also, added functions
that create and initialize a timeval object using a specified
value, and unit type.
Change-Id: Ic31a1c3262a44f77a5ef78bfc85dcf69a8d47392
The 'core' console (ie: asterisk -c) does read logger.conf and does
use the dateformat= option.
Whereas 'remote' consoles (ie: asterisk -r -T) does not read logger.conf
and uses a hard coded dateformat option for printing received verbose messages:
main/logger.c: static char dateformat[256] = "%b %e %T"
This change will load logger.conf for each remote console session and
use the dateformat= option to set the per-line timestamp for verbose messages
Change-Id: I3ea10990dbd920e9f7ce8ff771bc65aa7f4ea8c1
ASTERISK-25358: #close
Reported-by: Igor Liferenko
Because they modify their argument they are not pure functions and
should not be marked as such, otherwise the compiler may optimize
them away.
ASTERISK-29306 #close
Change-Id: Ibec03a08522dd39e8a137ece9bc6a3059dfaad5f
Some sorcery objects actually contain dynamic content
that can change despite the underlying configuration
itself not changing. A good example of this is the
res_pjsip_endpoint_identifier_ip module which allows
specifying hostnames. While the configuration may not
change between reloads the DNS information of the
hostnames can.
This change adds the ability for a sorcery object to be
marked as having dynamic contents which is then taken
into account when reloading by the sorcery file based
config module. If there is an object with dynamic content
then a reload will be forced while if there are none
then the existing behavior of not reloading occurs.
ASTERISK-29321
Change-Id: I9342dc55be46cc00204533c266a68d972760a0b1
This partially reverts commit 3d1bf3c537,
specifically for app.h.
This works with both gcc 9.3.0 and 10.2.0 now, both for C and C++ (as
tested with external modules).
ASTERISK-29287
Change-Id: I5b9f02a9b290675682a1d13f1788fdda597c9fca
Signed-off-by: Jaco Kroon <jaco@uls.co.za>
After some changes to streams and topologies, receiving fax through
local channels stopped working. This change adds a stream topology with
a stream of type IMAGE to the local channel pair and allows fax to be
received.
ASTERISK-29035 #close
Change-Id: Id103cc5c9295295d8e68d5628e76220f8f17e9fb
When a Transfer/REFER is executed, TRANSFERSTATUSPROTOCOL variable is
0 when no protocl specific error
SIP example of failure, 3xx-6xx for the SIP error code received
This allows applications to perform actions based on the failure
reason.
ASTERISK-29252 #close
Reported-by: Dan Cropp
Change-Id: Ia6a94784b4925628af122409cdd733c9f29abfc4
Rename check_manager_enabled() and check_webmanager_enabled() to begin
with ast_ so that the symbols are automatically exported by the
linker.
ASTERISK~29184
Change-Id: I85762b9a5d14500c15f6bad6507138c8858644c9
This was dead code, test code introduced with Asterisk 13. This was
found while analyzing ASTERISK_28416 and ASTERISK_29185. This change
partly fixes, not closes those two issues.
Change-Id: I42d0daa37f6f334c7d86672f06f085858a3f3940
As described in the issue, /tmp is not a suitable location for a
large amount of cached media files, since most distributions make
/tmp a RAM-based tmpfs mount with limited capacity.
I opted for a location that can be configured separately, as opposed
to using a subdirectory of spooldir, given the different storage
profile (transient files vs files that might stay there indefinitely).
This commit just makes the cache directory configurable, and changes
the default location from /tmp to /var/cache/asterisk.
ASTERISK-29143
Change-Id: Ic54e95199405abacd9e509cef5f08fa14c510b5d
* Added a ONESHOT type that never reschedules.
* Added "like" capability to "pjsip show scheduled_tasks" so you can do
the following:
CLI> pjsip show scheduled_tasks like outreg
PJSIP Scheduled Tasks:
Task Name Interval Times Run ...
============================================= ========= ========= ...
pjsip/outreg/testtrunk-reg-0-00000074 50.000 oneshot ...
pjsip/outreg/voipms-reg-0-00000073 110.000 oneshot ...
* Fixed incorrect display of "Next Start".
* Compacted the displays of times in the CLI.
* Added two new functions (ast_sip_sched_task_get_times2,
ast_sip_sched_task_get_times_by_name2) that retrieve the interval,
next start time, and next run time in addition to the times already
returned by ast_sip_sched_task_get_times().
Change-Id: Ie718ca9fd30490b8a167bedf6b0b06d619dc52f3
The data can be freed if the old object '_data' is the same object as
new 'data'. Because at first the object is unreferenced which can lead
to destroying it.
This could happened in res_pjsip_pubsub when the publication is updated
which could lead to segfault in function publish_expire.
Change-Id: I0164f57c387243510bdbd2f8dcf33377b6c202da
This avoids the inclusion of the OpenSSL headers in the public header,
which avoids one external library dependency in res_pjsip_stir_shaken.
Change-Id: I6a07e2d81d2b5442e24e99b8cc733a99f881dcf4
pjproject returns the dialog locked and with a reference. However,
in Asterisk the method that handles this decrements the reference
and removes the lock prior to returning. This makes it possible,
under some circumstances, for another thread to free said dialog
before the thread that created it attempts to use it again. Of
course when the thread that created it tries to use a freed dialog
a crash can occur.
This patch makes it so Asterisk now returns the newly created
dialog both locked, and with an added reference. This allows the
caller to de-reference, and unlock the dialog when it is safe to
do so.
In the case of a new SIP Invite the lock, and reference are now
held for the entirety of the new invite handling process.
Otherwise it's possible for the dialog, or its dependent objects,
like the transaction, to disappear. For example if there is a TCP
transport error.
ASTERISK-29057 #close
Change-Id: I5ef645a47829596f402cf383dc02c629c618969e
(cherry picked from commit 6baa4b53be)
If Asterisk sends out and INVITE and receives a challenge with a
different nonce value each time, it will continually send out INVITEs,
even if the call is hung up. The endpoint must be configured for
outbound authentication in order for this to occur. A limit has been set
on outbound INVITEs so that, once reached, Asterisk will stop sending
INVITEs and the transaction will terminate.
ASTERISK-29013
Change-Id: I2d001ca745b00ca8aa12030f2240cd72363b46f7
Added debug logging categories that allow a user to output debug
information based on a specified category. This lets the user limit,
and filter debug output to data relevant to a particular context,
or topic. For instance the following categories are now available for
debug logging purposes:
dtls, dtls_packet, ice, rtcp, rtcp_packet, rtp, rtp_packet,
stun, stun_packet
These debug categories can be enable/disable via an Asterisk CLI command.
While this overrides, and outputs debug data, core system debugging is
not affected by this patch. Statements still output at their appropriate
debug level. As well backwards compatibility has been maintained with
past debug groups that could be enabled using the CLI (e.g. rtpdebug,
stundebug, etc.).
ASTERISK-29054 #close
Change-Id: I6e6cb247bb1f01dbf34750b2cd98e5b5b41a1849
In the event that the desired extension already exists,
ast_add_extension2_lockopt() will free the 'data' it is passed before
returning an error, so we should not be freeing it ourselves.
Additionally, there were two places where ast_add_extension2_lockopt()
could return an error without also freeing the 'data' pointer, so we
add that.
ASTERISK-29097 #close
Change-Id: I904707aae55169feda050a5ed7c6793b53fe6eae
app_confbridge now has the ability to set the estimated bitrate on an
SFU bridge. To use it, set a bridge profile's remb_behavior to "force"
and set remb_estimated_bitrate to a rate in bits per second. The
remb_estimated_bitrate parameter is ignored if remb_behavior is something
other than "force".
Change-Id: Idce6464ff014a37ea3b82944452e56cc4d75ab0a
ast_trace() was always emitting messages when it's level was set to -1
because it was ignoring scope_level.
Change-Id: I849c8f4f4613899c37f82be0202024e7d117e506
Implemention of History-Info capable of interworking with Diversion
Header following RFC7544
ASTERISK-29027 #close
Change-Id: I2296369582d4b295c5ea1e60bec391dd1d318fa6
Added to:
* bridges/bridge_softmix.c
* channels/chan_pjsip.c
* include/asterisk/res_pjsip_session.h
* main/channel.c
* res/res_pjsip_session.c
There NO functional changes in this commit.
Change-Id: I06af034d1ff3ea1feb56596fd7bd6d7939dfdcc3
When both Asterisk and a UA send re-invites at the same time, both
send 491 "Transaction in progress" responses to each other and back
off a specified amount of time before retrying. When Asterisk
prepares to send its re-invite, it sets up the session's pending
media state with the new topology it wants, then sends the
re-invite. Unfortunately, when it received the re-invite from the
UA, it partially processed the media in the re-invite and reset
the pending media state before sending the 491 losing the state it
set in its own re-invite.
Asterisk also was not tracking re-invites received while an existing
re-invite was queued resulting in sending stale SDP with missing
or duplicated streams, or no re-invite at all because we erroneously
determined that a re-invite wasn't needed.
There was also an issue in bridge_softmix where we were using a stream
from the wrong topology to determine if a stream was added. This also
caused us to erroneously determine that a re-invite wasn't needed.
Regardless of how the delayed re-invite was triggered, we need to
reconcile the topology that was active at the time the delayed
request was queued, the pending topology of the queued request,
and the topology currently active on the session. To do this we
need a topology resolver AND we need to make stream named unique
so we can accurately tell what a stream has been added or removed
and if we can re-use a slot in the topology.
Summary of changes:
* bridge_softmix:
* We no longer reset the stream name to "removed" in
remove_all_original_streams(). That was causing multiple streams
to have the same name and wrecked the checks for duplicate streams.
* softmix_bridge_stream_sources_update() was checking the old_stream
to see if it had the softmix prefix and not considering the stream
as "new" if it did. If the stream in that slot has something in it
because another re-invite happened, then that slot in old might
have a softmix stream but the same stream in new might actually
be a new one. Now we check the new_stream's name instead of
the old_stream's.
* stream:
* Instead of using plain media type name ("audio", "video", etc) as
the default stream name, we now append the stream position to it
to make it unique. We need to do this so we can distinguish multiple
streams of the same type from each other.
* When we set a stream's state to REMOVED, we no longer reset its
name to "removed" or destroy its metadata. Again, we need to
do this so we can distinguish multiple streams of the same
type from each other.
* res_pjsip_session:
* Added resolve_refresh_media_states() that takes in 3 media states
and creates an up-to-date pending media state that includes the changes
that might have happened while a delayed session refresh was in the
delayed queue.
* Added is_media_state_valid() that checks the consistency of
a media state and returns a true/false value. A valid state has:
* The same number of stream entries as media session entries.
Some media session entries can be NULL however.
* No duplicate streams.
* A valid stream for each non-NULL media session.
* A stream that matches each media session's stream_num
and media type.
* Updated handle_incoming_sdp() to set the stream name to include the
stream position number in the name to make it unique.
* Updated the ast_sip_session_delayed_request structure to include both
the pending and active media states and updated the associated delay
functions to process them.
* Updated sip_session_refresh() to accept both the pending and active
media states that were in effect when the request was originally queued
and to pass them on should the request need to be delayed again.
* Updated sip_session_refresh() to call resolve_refresh_media_states()
and substitute its results for the pending state passed in.
* Updated sip_session_refresh() with additional debugging.
* Updated session_reinvite_on_rx_request() to simply return PJ_FALSE
to pjproject if a transaction is in progress. This stops us from
creating a partial pending media state that would be invalid later on.
* Updated reschedule_reinvite() to clone both the current pending and
active media states and pass them to delay_request() so the resolver
can tell what the original intention of the re-invite was.
* Added a large unit test for the resolver.
ASTERISK-29014
Change-Id: Id3440972943c611a15f652c6c569fa0e4536bfcb
There's a race condition with bridging where a bridge can be torn down
causing the bridge_channel's ast_channel to become NULL when it's still
needed. This particular case happened with attended transfers, but the
crash occurred when trying to publish a stasis message. Now, the
bridge_channel is locked, a ref to the ast_channel is obtained, and that
ref is passed down the chain.
Change-Id: Ic48715c0c041615d17d286790ae3e8c61bb28814
T.140 data in RTP is not zero terminated, so when we are queuing a text
frame on a bridge we need to ensure that we are passing a zero
terminated string.
ASTERISK-28974 #close
Change-Id: Ic10057387ce30b2094613ea67e3ae8c5c431dda3
The SCOPE_ENTER and SCOPE_EXIT* macros now print debug messages
at the same level as the scope level. This allows the same
messages to be printed to the debug log when AST_DEVMODE
isn't enabled.
Also added a few variants of the SCOPE_EXIT macros that will
also call ast_log instead of ast_debug to make it easier to
use scope tracing and still print error messages.
Change-Id: I7fe55f7ec28069919a0fc0b11a82235ce904cc21
* Added ast_stream_to_stra and ast_stream_topology_to_stra() macros
which are shortcuts for
ast_str_tmp(256, ast_stream_to_str(stream, &STR_TMP))
* Added the stream position to the string representation of the
stream.
* Fixed some formatting in ast_stream_to_str().
Change-Id: Idaf4cb0affa46d4dce58a73a111f35435331cc4b
Allow passing a topology from the called channel back to the
calling channel.
* Added a new function ast_queue_answer() that accepts a stream
topology and queues an ANSWER CONTROL frame with it as the
data. This allows the called channel to indicate its resolved
topology.
* Added a new virtual function to the channel tech structure
answer_with_stream_topology() that allows the calling channel
to receive the called channel's topology. Added
ast_raw_answer_with_stream_topology() that invokes that virtual
function.
* Modified app_dial.c and features.c to grab the topology from the
ANSWER frame queued by the answering channel and send it to
the calling channel with ast_raw_answer_with_stream_topology().
* Modified frame.c to automatically cleanup the reference
to the topology on ANSWER frames.
Added a few debugging messages to stream.c.
Change-Id: I0115d2ed68d6bae0f87e85abcf16c771bdaf992c
The assumed behavior of realloc() - that it was effectively a free() if
its second argument was 0 - is Linux specific behavior and is not
guaranteed by either POSIX or the C specification.
Instead, if we want to resize a vector to 0, do it explicitly.
Change-Id: Ife31d4b510ebab41cb5477fdc7ea4e3138ca8b4f
With the addition of STIR/SHAKEN, the function ast_base64decode_string
was added for convenience since there is a lot of converting done during
the STIR/SHAKEN process. This function returned the decoded string for
you, but did not NULL terminate it, causing some issues (specifically
with MALLOC_DEBUG). Now, the returned string is NULL terminated, and the
documentation has been updated to reflect this.
Change-Id: Icdd7d05b323b0c47ff6ed43492937a03641bdcf5
This change renames the codec preference endpoint options.
incoming_offer_codec_prefs becomes codec_prefs_incoming_offer
to keep the options together when showing an endpoint.
Change-Id: I6202965b4723777f22a83afcbbafcdafb1d11c8d
There are various places in Asterisk - specifically in regards to
database integration - where having some kind of UTF-8 validation would
be beneficial. This patch adds:
* Functions to validate that a given string contains only valid UTF-8
sequences.
* A function to copy a string (similar to ast_copy_string) stopping when
an invalid UTF-8 sequence is encountered.
* A UTF-8 validator that allows for progressive validation.
All of this is based on the excellent UTF-8 decoder by Björn Höhrmann.
More information is available here:
https://bjoern.hoehrmann.de/utf-8/decoder/dfa/
The API was written in such a way that should allow us to replace the
implementation later should we determine that we need something more
comprehensive.
Change-Id: I3555d787a79e7c780a7800cd26e0b5056368abf9
* Updated AMI version to 8.0.0
* Updated ARI version to 7.0.0
* Update make_ari_stubs.py to "Asterisk 19"
Change-Id: I51fb38c2e29f2db785f64a8bbd5565d56bea5af5
Added a new configuration option for PJSIP endpoints - stir_shaken. If
set to yes, then STIR/SHAKEN support will be added to inbound and
outbound INVITEs. The default is no. Alembic has been updated to include
this option.
Previously the dialplan function was not trimming the whitespace from
the parameters it recieved. Now it does.
Also added a conditional that, when TEST_FRAMEWORK is enabled, the
timestamp in the identity header will be overlooked. This is just for
testing, since the testsuite will rely on a SIPp scenario with a preset
identity header to trigger the MISMATCH result.
Change-Id: I43d67f1489b8c1c5729ed3ca8d71e35ddf438df1
Prior to making any modifications to the pjsip infrastructure
for ACN, I've added the tracing functions to the existing code.
This should make the final commit easier to review, but we can also
now run a "before and after" trace.
No functional changes were made with this commit.
Change-Id: Ia83a1a2687ccb96f2bc8a2a3928a5214c4be775c
This commit adds the endpoint options required to control
Advanced Codec Negotiation.
incoming_offer_codec_prefs
outgoing_offer_codec_prefs
incoming_answer_codec_prefs
outgoing_answer_codec_prefs
The documentation may need tweaking and some additional edits
added, especially for the "answer" prefs. That'll be handled
when things finalize.
This commit is safe to merge as it doens't alter any existing
functionality nor does it alter the previous codec negotiation
work which may now be obsolete.
Change-Id: I920ba925d7dd36430dfd2ebd9d82d23f123d0e11
* ast_frame_subclass2str() and ast_frame_type2str() now return
a pointer to the buffer that was passed in instead of void.
This makes it easier to use these functions inline in
printf-style debugging statements.
* Added many missing control frame entries in
ast_frame_subclass2str.
Change-Id: Ifd0d6578e758cd644c96d17a5383ff2128c572fc
Tracing through synchronous tasks was a little troublesome because
the new thread's stack counter reset to 0. This change allows
a synchronous task to set its trace level to be the same as the
thread that pushed the task. For now, the task's level has to be
passed in the task's data structure but a future enhancement to the
taskprocessor subsystem could automatically set the trace level
of the servant to be that of the caller.
This doesn't really make sense for async tasks because you never
know when they're going to run anyway.
Change-Id: Ib8049c0b815063a45d8c7b0cb4e30b7b87b1d825
This patch allows a user of AMI to now specify the type of message
content contained within by setting the 'Content-Type' parameter.
Note, the AMI version has been bumped for this change.
ASTERISK-28945 #close
Change-Id: Ibb5315702532c6b954e1498beddc8855fabdf4bb
The Streams API becomes the home for the core ACN capabilities.
These include...
* Parsing and formatting of codec negotation preferences.
* Resolving pending streams and topologies with those configured
using configured preferences.
* Utility functions for creating string representations of
streams, topologies, and negotiation preferences.
For codec negotiation preferences:
* Added ast_stream_codec_prefs_parse() which takes a string
representation of codec negotiation preferences, which
may come from a pjsip endpoint for example, and populates
a ast_stream_codec_negotiation_prefs structure.
* Added ast_stream_codec_prefs_to_str() which does the reverse.
* Added many functions to parse individual parameter name
and value strings to their respectrive enum values, and the
reverse.
For streams:
* Added ast_stream_create_resolved() which takes a "live" stream
and resolves it with a configured stream and the negotiation
preferences to create a new stream.
* Added ast_stream_to_str() which create a string representation
of a stream suitable for debug or display purposes.
For topology:
* Added ast_stream_topology_create_resolved() which takes a "live"
topology and resolves it, stream by stream, with a configured
topology stream and the negotiation preferences to create a new
topology.
* Added ast_stream_topology_to_str() which create a string
representation of a topology suitable for debug or display
purposes.
* Renamed ast_format_caps_from_topology() to
ast_stream_topology_get_formats() to be more consistent with
the existing ast_stream_get_formats().
Additional changes:
* A new function ast_format_cap_append_names() appends the results
to the ast_str buffer instead of replacing buffer contents.
Change-Id: I2df77dedd0c72c52deb6e329effe057a8e06cd56
Created new SCOPE_ functions that don't depend on RAII_VAR. Besides
generating less code, the use of the explicit SCOPE_EXIT macros
capture the line number where the scope exited. The RAII_VAR
versions can't do that.
* SCOPE_ENTER(level, ...): Like SCOPE_TRACE but doesn't use
RAII_VAR and therefore needs needs one of...
* SCOPE_EXIT(...): Decrements the trace stack counter and optionally
prints a message.
* SCOPE_EXIT_EXPR(__expr, ...): Decrements the trace stack counter,
optionally prints a message, then executes the expression.
SCOPE_EXIT_EXPR(break, "My while got broken\n");
* SCOPE_EXIT_RTN(, ...): Decrements the trace stack counter,
optionally prints a message, then returns without a value.
SCOPE_EXIT_RTN("Bye\n");
* SCOPE_EXIT_RTN_VALUE(__return_value, ...): Decrements the trace
stack counter, optionally prints a message, then returns the value
specified.
SCOPE_EXIT_RTN_VALUE(rc, "Returning with RC: %d\n", rc);
Create an ast_str helper ast_str_tmp() that allocates a temporary
ast_str that can be passed to a function that needs it, then frees
it. This makes using the above macros easier. Example:
SCOPE_ENTER(1, Format Caps 1: %s Format Caps 2: %s\n",
ast_str_tmp(32, ast_format_cap_get_names(cap1, &STR_TMP),
ast_str_tmp(32, ast_format_cap_get_names(cap2, &STR_TMP));
The calls to ast_str_tmp create an ast_str of the specified initial
length which can be referenced as STR_TMP. It then calls the
expression, which must return a char *, ast_strdupa's it, frees
STR_TMP, then returns the ast_strdupa'd string. That string is
freed when the function returns.
Change-Id: I44059b20d55a889aa91440d2f8a590865998be51
Integrated STIR/SHAKEN support with outgoing INVITEs. When an INVITE is
sent, the caller ID will be checked to see if there is a certificate
that corresponds to it. If so, that information will be retrieved and an
Identity header will be added to the SIP message. The format is:
header.payload.signature;info=<public_key_url>alg=ES256;ppt=shaken
Header, payload, and signature are all BASE64 encoded. The public key
URL is retrieved from the certificate. Currently the algorithm and ppt
are ES256 and shaken, respectively. This message is signed and can be
used for verification on the receiving end.
Two new configuration options have been added to the certificate object:
attestation and origid. The attestation is required and must be A, B, or
C. origid is the origination identifier.
A new utility function has been added as well that takes a string,
allocates space, BASE64 encodes it, then returns it, eliminating the
need to calculate the size yourself.
Change-Id: I1f84d6a5839cb2ed152ef4255b380cfc2de662b4
This patch makes the usual necessary changes when upgrading to a new
version pjproject. For instance, version number bump, patches removed
from third-party, new *.md5 file added, etc..
This patch also includes a change to the Asterisk pjproject Makefile to
explicitly create the 'source/pjsip-apps/lib' directory. This directory
is no longer there by default so needs to be added so the Asterisk
malloc debug can be built.
This patch also includes some minor changes to Asterisk that were a result
of the upgrade. Specifically, there was a backward incompatibility change
made in 2.10 that modified the "expires header" variable field from a
signed to an unsigned value. This potentially effects comparison. Namely,
those check for a value less than zero. This patch modified a few locations
in the Asterisk code that may have been affected.
Lastly, this patch adds a new macro PJSIP_MINVERSION that can be used to
check a minimum version of pjproject at compile time.
ASTERISK-28899 #close
Change-Id: Iec8821c6cbbc08c369d0e3cd2f14e691b41d0c81
When requesting a Local channel the requested stream topology
or a converted stream topology will now be placed onto the
resulting channels.
Frames written in on streams will now also preserve the stream
identifier as they are queued on the opposite channel.
Finally when a stream topology change is requested it is
immediately accepted and reflected on both channels. Each
channel also receives a queued frame to indicate that the
topology has changed.
ASTERISK-28938
Change-Id: I4e9d94da5230d4bd046dc755651493fce1d87186
This patch fixes a few compile warnings/errors that now occur when using gcc
10+.
Also, the Makefile.rules check to turn off partial inlining in gcc versions
greater or equal to 8.2.1 had a bug where it only it only checked against
versions with at least 3 numbers (ex: 8.2.1 vs 10). This patch now ensures
any version above the specified version is correctly compared.
Change-Id: I54718496eb0c3ce5bd6d427cd279a29e8d2825f9
Integrated STIR/SHAKEN support with incoming INVITES. Upon receiving an
INVITE, the Identity header is retrieved, parsing the message to verify
the signature. If any of the parsing fails,
AST_STIR_SHAKEN_VERIFY_NOT_PRESENT will be added to the channel for this
caller ID. If verification itself fails,
AST_STIR_SHAKEN_VERIFY_SIGNATURE_FAILED will be added. If anything in
the payload does not line up with the SIP signaling,
AST_STIR_SHAKEN_VERIFY_MISMATCH will be added. If all of the above steps
pass, then AST_STIR_SHAKEN_VERIFY_PASSED will be added, completing the
verification process.
A new config option has been added to the general section for
stir_shaken.conf. "signature_timeout" is the amount of time a signature
will be considered valid. If an INVITE is received and the amount of
time between when it was received and when it was signed is greater than
signature_timeout, verification will fail.
Some changes were also made to signing and verification. There was an
error where the whole JSON string was being signed rather than the
header combined with the payload. This has been changed to sign the
correct thing. Verification has been changed to do this as well, and the
unit tests have been updated to reflect these changes.
A couple of utility functions have also been added. One decodes a BASE64
string and returns the decoded string, doing all the length calculations
for you. The other retrieves a string value from a header in a rdata
object.
Change-Id: I855f857be3d1c63b64812ac35d9ce0534085b913
What's wrong with ast_debug?
ast_debug is fine for general purpose debug output but it's not
really geared for scope tracing since it doesn't present its
output in a way that makes capturing and analyzing flow through
Asterisk easy.
How is scope tracing better?
Scope tracing uses the same "cleanup" attribute that RAII_VAR
uses to print messages to a separate "trace" log level. Even
better, the messages are indented and unindented based on a
thread-local call depth counter. When output to a separate log
file, the output is uncluttered and easy to follow.
Here's an example of the output. The leading timestamps and
thread ids are removed and the output cut off at 68 columns for
commit message restrictions but you get the idea.
--> res_pjsip_session.c:3680 handle_incoming PJSIP/1173-00000001
--> res_pjsip_session.c:3661 handle_incoming_response PJSIP/1173
--> res_pjsip_session.c:3669 handle_incoming_response PJSIP/
--> chan_pjsip.c:3265 chan_pjsip_incoming_response_after
--> chan_pjsip.c:3194 chan_pjsip_incoming_response P
chan_pjsip.c:3245 chan_pjsip_incoming_respon
<-- chan_pjsip.c:3194 chan_pjsip_incoming_response P
<-- chan_pjsip.c:3265 chan_pjsip_incoming_response_after
<-- res_pjsip_session.c:3669 handle_incoming_response PJSIP/
<-- res_pjsip_session.c:3661 handle_incoming_response PJSIP/1173
<-- res_pjsip_session.c:3680 handle_incoming PJSIP/1173-00000001
The messages with the "-->" or "<--" were produced by including
the following at the top of each function:
SCOPE_TRACE(1, "%s\n", ast_sip_session_get_name(session));
Scope isn't limited to functions any more than RAII_VAR is. You
can also see entry and exit from "if", "for", "while", etc blocks.
There is also an ast_trace() macro that doesn't track entry or
exit but simply outputs a message to the trace log using the
current indent level. The deepest message in the sample
(chan_pjsip.c:3245) was used to indicate which "case" in a
"select" was executed.
How do you use it?
More documentation is available in logger.h but here's an overview:
* Configure with --enable-dev-mode. Like debug, scope tracing
is #ifdef'd out if devmode isn't enabled.
* Add a SCOPE_TRACE() call to the top of your function.
* Set a logger channel in logger.conf to output the "trace" level.
* Use the CLI (or cli.conf) to set a trace level similar to setting
debug level... CLI> core set trace 2 res_pjsip.so
Summary Of Changes:
* Added LOG_TRACE logger level. Actually it occupies the slot
formerly occupied by the now defunct "event" level.
* Added core asterisk option "trace" similar to debug. Includes
ability to specify global trace level in asterisk.conf and CLI
commands to turn on/off and set levels. Levels can be set
globally (probably not a good idea), or by module/source file.
* Updated sample asterisk.conf and logger.conf. Tracing is
disabled by default in both.
* Added __ast_trace() to logger.c which keeps track of the indent
level using TLS. It's #ifdef'd out if devmode isn't enabled.
* Added ast_trace() and SCOPE_TRACE() macros to logger.h.
These are all #ifdef'd out if devmode isn't enabled.
Why not use gcc's -finstrument-functions capability?
gcc's facility doesn't allow access to local data and doesn't
operate on non-function scopes.
Known Issues:
The only know issue is that we currently don't know the line
number where the scope exited. It's reported as the same place
the scope was entered. There's probably a way to get around it
but it might involve looking at the stack and doing an 'addr2line'
to get the line number. Kind of like ast_backtrace() does.
Not sure if it's worth it.
Change-Id: Ic5ebb859883f9c10a08c5630802de33500cad027
Adds the "STIR_SHAKEN" dialplan function and an API call to add a
STIR_SHAKEN verification result to a channel. This information will be
held in a datastore on the channel that can later be queried through the
"STIR_SHAKEN" dialplan funtion to get information on STIR_SHAKEN results
including identity, attestation, and verify_result. Here are some
examples:
STIR_SHAKEN(count)
STIR_SHAKEN(0, identity)
STIR_SHAKEN(1, attestation)
STIR_SHAKEN(2, verify_result)
Getting the count can be used to iterate through the results and pull
information by specifying the index and the field you want to retrieve.
Change-Id: Ice6d52a3a7d6e4607c9c35b28a1f7c25f5284a82
Add a new "masquarade" channel event, and use it in app_queue to track unique id's.
Testcase is submitted as https://gerrit.asterisk.org/c/testsuite/+/14210
ASTERISK-28829 #close
ASTERISK-25844 #close
Change-Id: Ifc5f9f9fd70903f3c6e49738d3bc632b085d2df6
There are a lot of moving parts in this patch, but the focus of it is on
the verification of the signature using a public key located at the
public key URL provided in the JSON payload. First, we check the
database to see if we have already downloaded the key. If so, check to
see if it has expired. If it has, redownload from the URL. If we don't
have an entry in the database, just go ahead and download the public
key. The expiration is tested each time we download the file. After
that, read the public key from the file and use it to verify the
signature. All sanity checking is done when the payload is first
received, so the verification is complete once this point is reached.
The XML has also been added since a new config option was added to
general (curl_timeout). The maximum amount of time to wait for a
download can be configured through this option, with a low value by
default.
Change-Id: I3ba4c63880493bf8c7d17a9cfca1af0e934d1a1c
Some places in Asterisk did not treat the formats on a stream
as immutable when they are.
The ast_stream_get_formats function is now const to enforce this
and parts of Asterisk have been updated to take this into account.
Some violations of this were also fixed along the way.
An additional minor tweak is that streams are now allocated with
an empty format capabilities structure removing the need in various
places to check that one is present on the stream.
ASTERISK-28846
Change-Id: I32f29715330db4ff48edd6f1f359090458a9bfbe
When in a conference bridge it may be necessary to have
text messages disabled for specific participants or for
all. This change adds a configuration option, "text_messaging",
which can be used to enable or disable this on the
user profile. By default existing behavior is preserved
as it defaults to "yes".
ASTERISK-28841
Change-Id: I30b5d9ae6f4803881d1ed9300590d405e392bc13
This unit test runs through combinations of...
* Local codecs
* Remote Codecs
* Codec Preference
* Incoming/Outgoing
A few new APIs were created to make it easier to test
the functionality but didn't result in any actual
functional change.
ASTERISK_28777
Change-Id: Ic8957c43e7ceeab0e9272af60ea53f056164f164
Based on this new endpoint setting, a joint list of preferred codecs
between those received from the Asterisk core (remote), and those
specified in the endpoint's "allow" parameter (local) is created and
is used to create the outgoing SDP offer.
* Add outgoing_call_offer_pref to pjsip_configuration (endpoint)
* Add "call_direction" to res_pjsip_session.
* Update pjsip_session_caps.c to make the functions more generic
so they could be used for both incoming and outgoing.
* Update ast_sip_session_create_outgoing to create the
pending_media_state->topology with the results of
ast_sip_session_create_joint_call_stream().
* The endpoint "preferred_codec_only" option now automatically sets
AST_SIP_CALL_CODEC_PREF_FIRST in incoming_call_offer_pref.
* A helper function ast_stream_get_format_count() was added to
streams to return the current count of formats.
ASTERISK-28777
Change-Id: Id4ec0b4a906c2ae5885bf947f101c59059935437
This change provides functions that take in a JSON payload, verify that
the contents contain all the mandatory fields and required values (if
any), and signs the payload with the private key. Four fields are added
to the payload: x5u, attest, iat, and origid. As of now, these are just
placeholder values that will be set to actual values once the logic is
implemented for what to do when an actual payload is received, but the
functions to add these values have all been implemented and are ready to
use. Upon successful signing and the addition of those four values, a
ast_stir_shaken_payload is returned, containing other useful information
such as the algorithm and signature.
Change-Id: I74fa41c0640ab2a64a1a80110155bd7062f13393
named_acl.c (which is really a named_ha) now uses ast_ha_output.
I've also updated main/manager.c to output the actual ACL on "manager
show user <username>" if one is set. If this works then we can add
similar to other modules as required.
Change-Id: I0ec9876a90dddd379c80ec078d48e3ee6991eb0f
This fixes ast_addressfamily_to_sockaddrsize to reference the
provided argument, and ast_sockaddr_from_sockaddr to not use the name of
a structure as argument.
Change-Id: Ibf5db469c47c3b4214edf8456326086174e8edd7
This commit sets up some of the initial framework for the module and
adds a way to read the private key from the specified file, which will
then be appended to the certificate object. This works fine for now, but
eventually some other structure will likely need to be used to store all
this information. Similarly, the caller_id_number is specified on the
certificate config object, but in the end we will want that information
to be tied to the certificate itself and read it from there.
A method has been added that will retrieve the private key associated
with the caller_id_number passed in. Tab completion for certificates and
stores has also been added.
Change-Id: Ic4bc1416fab5d6afe15a8e2d32f7ddd4e023295f
Add a new option, incoming_call_offer_pref, to res_pjsip endpoints that
specifies the preferred order of codecs after receiving an offer.
This patch does the following:
Adds a new enumeration, ast_sip_call_codec_pref, used by the the new
configuration option that's added to the endpoint media structure.
Adds a new ast_sip_session_caps structure that's set for each session media
object.
Creates a new file, res_pjsip_session_caps that "implements" the new
structure and option, and is compiled into the res_pjsip_session library.
ASTERISK-28756 #close
Change-Id: I35e7a2a0c236cfb6bd9cdf89539f57a1ffefc76f
When a text message was received any associated variable was not written to
the ARI TextMessageReceived event. This occurred because Asterisk only wrote
out "send" variables. However, even those "send" variables would fail ARI
validation due to a TextMessageVariable formatting bug.
Since it seems the TextMessageReceived event has never been able to include
actual variables it was decided to remove the TextMessageVariable object type
from ARI, and simply return a JSON object of key/value pairs for variables.
This aligns more with how the ARI sendMessage handles variables, and other
places in ARI.
ASTERISK-28755 #close
Change-Id: Ia6051c01a53b30cf7edef84c27df4ed4479b8b6f
George Joseph
Naveen Albert
Mark Petersen
Kevin Harwell
Sean Bright
Ben Ford
Philip Prindeville
Alexei Gradinari
Mike Bradeen
Michał Górny
Alexander Traud
Jaco Kroon
Josh Soref
Matthew Kern
Joseph Nadiv
Joshua C. Colp
Rijnhard Hessel
Andre Barbosa
Naveen Albert
Mark Murawski
Sebastien Duthil
Dan Cropp
lvl
Kevin Harwell
Torrey Searle
Nathan Bruning
Jean Aunis