When sip.conf contained tcpenable=yes and autodomain=yes, the TCP domain was
added in any case, because of a local Boolean-negation error of the return value
of ast_sockaddr_cmp. After fixing this error for TCP and TLS, the TLS domain was
still always added with tlsenable=yes, because the domains were not compared
just on the address but also on the port – and TLS is always on a different port
than UDP/TCP.
ASTERISK-27106
Change-Id: I14fe9e319e238320b094016980445ef3a5b3337c
Because of a copy-and-paste error when the struct ast_sockaddr changed,
tlsbindaddr was not added, when sip.conf contained autodomain=yes; see
"show sip domains" on the command-line interface (CLI) of Asterisk.
ASTERISK-27106
Change-Id: I3d0957150017c223136968ef1266f275d0d6695e
When connected_line_method is "invite", we're supposed to determine
if the client can support UPDATE and if it can, send UPDATE instead
of INVITE to avoid the SDP renegotiation. Not only was pjproject
not setting the PJSIP_INV_SUPPORT_UPDATE flag, we were testing
that invite_tsx wasn't NULL which isn't always the case.
* Updated chan_pjsip/update_connected_line_information to drop the
requirement that invite_tsx isn't NULL.
* Submitted patch to pjproject sip_inv.c that sets the
PJSIP_INV_SUPPORT_UPDATE flag correctly.
* Updated pjsip.conf.sample to clarify what happens when "invite"
is specified.
ASTERISK-27095
Change-Id: Ic2381b3567b8052c616d96fbe79564c530e81560
The existing auto dtmf mode reverts to inband if 4733 fails to be
negotiated. This patch adds a new mode auto_info which will
switch to INFO instead of inband if 4733 is not available.
ASTERISK-27066 #close
Change-Id: Id185b11e84afd9191a2f269e8443019047765e91
The construction of the returned string assumed incorrectly that the
supplied buffer would always be initialized as an empty string. If it is
not an empty string we could overrun the supplied buffer by the length of
the non-empty buffer string plus one. It is also theoreticaly possible
for the supplied buffer to be overrun by a string terminator during a read
operation even if the supplied buffer is an empty string.
* Fix the assumption that the supplied buffer would already be an empty
string. The buffer is not guaranteed to contain an empty string by all
possible callers.
* Fix string terminator buffer overrun potential.
Change-Id: If6a0806806527678c8554b1dcb34fd7808aa95c9
The chan_pjsip module uses a calculation approach for
determining device state. This means that in situations
where we would expect device state to change we need to
tell the core to query. A scenario that was missed is
when early media was signaled.
This change adds the notification for the core to
query device state when we are told that early media
is being provided.
ASTERISK-27039
Change-Id: Iafebfd152894966344ff2e950a3cee9f59a3eb6f
PJSIP support in Asterisk differs from chan_sip in that it
allows media to be sent as-is without transcoding provided
the codecs were negotiated in the SDP. This is allowed
according to the RFC. Support for this differs quite a lot
though and some endpoints do not handle it well.
This change extends the 'asymmetric_rtp_codec' option to
also cover this case. When set to no (the default) the code
behaves as chan_sip does - the best codec is selected and
we will only ever send that, unless we change what we are
sending if the remote side changes. When set to yes we
will send media as-is without transcoding if the codec
has been negotiated in the SDP.
ASTERISK-26996
Change-Id: Ib1647f6902a0843e8c435946f831c2159e8d1d51
This introduces the ability for PJSIP code to specify filtering flags
when retrieving PJSIP contacts. The first flag for use causes the
query code to only retrieve contacts that are not unreachable. This
change has been leveraged by both the Dial() process and the
PJSIP_DIAL_CONTACTS dialplan function so they will now only attempt
calls to contacts which are not unreachable.
ASTERISK-26281
Change-Id: I8233b4faa21ba3db114f5a42e946e4b191446f6c
If we are offered or are offering RTCP-MUX, don't consider RTCP ICE
candidates. This confuses certain browsers (current Firefox for
example) and causes intial audio setup delays.
ASTERISK-26982 #close
Change-Id: Ifeaf47e83972fe8dbe58b7fb3d6d1823400cfb91
The while(1) loop in skinny_session wasn't checking for EOF so
a packet that was longer than a header but still truncated
would spin the while loop infinitely. Not only does this
permanently tie up a thread and drive a core to 100% utilization,
the call of ast_log() in such a tight loop eats all available
process memory.
Added poll with timeout to top of read loop
ASTERISK-26940 #close
Reported-by: Sandro Gauci
Change-Id: I2ce65f3c5cb24b4943a9f75b64d545a1e2cd2898
For outgoing TCP connections, Asterisk uses the first IP address of the
interface instead of the IP address we asked him to bind to.
ASTERISK-26922 #close
Reported-by: Ksenia
Change-Id: I43c71ca89211dbf1838e5bcdb9be8d06d98e54eb
If you use ast_request to create a PJSIP channel but then hang it
up without causing a transaction to be sent, the session will
never be destroyed. This is due ot the fact that it's pjproject
that triggers the session cleanup when the transaction ends.
app_chanisavail was doing this to get more granular channel state
and it's also possible for this to happen via ARI.
* ast_sip_session_terminate was modified to explicitly call the
cleanup tasks and unreference session if the invite state is NULL
AND invite_tsx is NULL (meaning we never sent a transaction).
* chan_pjsip/hangup was modified to bump session before it calls
ast_sip_session_terminate to insure that session stays valid
while it does its own cleanup.
* Added test events to session_destructor for a future testsuite
test.
ASTERISK-26908 #close
Reported-by: Richard Mudgett
Change-Id: I52daf6f757184e5544c261f64f6fe9602c4680a9
Some equipments may send a re-INVITE containing an SDP in the final ACK
request. If this happens in the context of direct media, the remote end
should be updated with a re-INVITE.
This patch queues an "update RTP peer" frame to trigger the re-INVITE,
instead of the "source change" frame wich was used previously.
ASTERISK-26951
Change-Id: I3644d2025f20e086ea9f8f62b486172c52b5b2e6
In all non-pbx modules, AST_MODULE_LOAD_FAILURE has been changed
to AST_MODULE_LOAD_DECLINE. This prevents asterisk from exiting
if a module can't be loaded. If the user wishes to retain the
FAILURE behavior for a specific module, they can use the "require"
or "preload-require" keyword in modules.conf.
A new API was added to logger: ast_is_logger_initialized(). This
allows asterisk.c/check_init() to print to the error log once the
logger subsystem is ready instead of just to stdout. If something
does fail before the logger is initialized, we now print to stderr
instead of stdout.
Change-Id: I5f4b50623d9b5a6cb7c5624a8c5c1274c13b2b25
SIP user-agents indicate which protocol extensions are allowed in headers
like Supported and Required. Such protocol extensions are Session Timers
(RFC 4028) for example. Session Timers are supported since Mantis-10665.
Since ASTERISK-21721, not only the first but multiple Supported/Required
headers in a message are parsed. In that change, an existing variable was
re-used within a newly added do-loop. Currently, at the end of that loop,
that variable is an empty string always. Previously, that variable was used
within log output. However, the log output was not changed.
ASTERISK-26915 #close
Change-Id: I09315f31b4d78fb214bb2a9fb6c0f5e143eae990
POSIX does not require getprotobyname() to be thread safe and some
implementations use static memory which causes issues when multiple
threads are used.
Further, our usage of it today is just to ultimately get IPPROTO_TCP
for calls to setsockopt(). So instead we just use IPPROTO_TCP directly.
Change-Id: I2e14e58674808f7ce99b2f5e900d0f90d0d8da48
When using a non-dynamic peer address, build_peer() invalidates the
peer address structure by setting the address family to unspecified.
However, if dnsmgr is enabled, the subsequent call to ast_dnsmgr_lookup()
will not amend the peer address if the cache is still valid, resulting
in peer connectivity failures.
To fix this, we call ast_dnsmgr_refresh() instead.
ASTERISK-26865
Change-Id: Id8a89a2f771ebbaf32255a35fe596a6dcb97a082
When querying for PJSIP specific information using the dialplan
function CHANNEL() it is possible that the underlying session
will no longer have a channel associated with it. This is
most likely to occur when the RTCP HEP module attempts to get
the channel name. If this happens then a crash will occur.
This change just adds a check that the channel exists on the
session before querying it.
ASTERISK-26857
Change-Id: I113479cffff6ae64cf8ed089e9e1565223426f01
When receiving a 422 response, the invitestate variable must be reset to
INV_CALLING.
ASTERISK-26841
Change-Id: Ia0502d6b02192664cefa4e75bafdd2645ce56099
* manager.c:manager_state_cb() Fix potential use of uninitialized hint[]
if a hint does not exist for the requested extension. Ran into this when
developing a testsuite test. The AMI event ExtensionStatus came out with
the hint header value containing garbage. The AMI event PresenceStatus
also had the same issue.
* manager.c:action_extensionstate() no need to completely initialize the
hint[]. Only initialize the first element.
* pbx.c:ast_add_hint() Remove unnecessary assignment.
* chan_sip.c: Eliminate an unneeded hint[] local variable. We only care
about the return value of ast_get_hint() there.
Change-Id: Ia9a8786f01f93f1f917200f0a50bead0319af97b
This change fixes a problem where removing the DTLS configuration
options and reloading would not disable DTLS. This occurred
because the DTLS configuration was not reset to an unconfigured
state on reload.
ASTERISK-26313
Change-Id: I10952709cc4a7727fb50534b042bce9d64894b39
There is difference exists in behaviour of char type on x86 and ARM.
On x86 by default char variable type means signed char, but in ARM
unsigned char used. This make binary calculations and negative values
works wrong on ARM.
This patch change type of char variables used for store negative
values and binary calculations to signed char.
ASTERISK-26714
Change-Id: Id78716dee9568a58419d4ef63c038affc3dfc7ab
* app_minivm: Use built-in completion facilities to complete optional
arguments.
* app_voicemail: Use built-in completion facilities to complete
optional arguments.
* app_confbridge: Add missing colons after 'Usage' text.
* chan_alsa: Use built-in completion facilities to complete optional
arguments.
* chan_sip: Use built-in completion facilities to complete optional
arguments. Add completions for 'load' for 'sip show user', 'sip show
peer', and 'sip qualify peer.'
* chan_skinny: Correct and extend completions for 'skinny reset' and
'skinny show line.'
* func_odbc: Correct completions for 'odbc read' and 'odbc write'
* main/asterisk: Correct and extend completions for 'core show file
version.'
* main/astmm: Use built-in completion facilities to complete arguments
for 'memory' commands.
* main/bridge: Correct completions for 'bridge kick.'
* main/ccss: Use built-in completion facilities to complete arguments
for 'cc cancel' command.
* main/cli: Add 'all' completion for 'channel request hangup.' Correct
completions for 'core set debug channel.' Correct completions for 'core
show calls.'
* main/pbx_app: Remove redundant completions for 'core show
applications.'
* main/pbx_hangup_handler: Remove unused completions for 'core show
hanguphandlers all.'
* res_sorcery_memory_cache: Add completion for 'reload' argument of
'sorcery memory cache stale' and properly implement.
Change-Id: Iee58c7392f6fec34ad9d596109117af87697bbca
When PJSIP tries to call an endpoint with a domain (e.g. 1000@test.com),
the user part is stripped down as it would be a trunk with a specified user,
and only the host part is called as a PJSIP endpoint and can't be found.
This is not correct in the case of a multidomain SIP account, so the stripping
after the @ sign is done only if the whole endpoint (in multidomain case
1000@test.com) can't be found.
ASTERISK-26248
Change-Id: I3a2dd6f57f3bd042df46b961eccd81d31ab202e6
We shouldn't unlock the channel after starting a snapshot staging because
another thread may interfere and do its own snapshot staging.
* app_dial.c:dial_exec_full() made hold the channel lock while setting up
the outgoing channel staging. Made hold the channel lock after the called
party answers while updating the caller channel staging.
* chan_sip.c:sip_new() completed the channel staging on off-nominal exit.
Also we need to use ast_hangup() instead of ast_channel_unref() at that
location.
* channel.c:__ast_channel_alloc_ap() added a comment about not needing to
complete the channel snapshot staging on off-nominal exit paths.
* rtp_engine.c:ast_rtp_instance_set_stats_vars() made hold the channel
locks while staging the channels for the stats channel variables.
Change-Id: Iefb6336893163f6447bad65568722ad5d5d8212a
The escalator works by creating a set of startup commands in cli.conf
that set up logger channels and issue the debug commands for the
subsystems specified. If asterisk is running when it is executed,
the same commands will be issued to the running instance. The original
cli.conf is saved before any changes are made and can be restored by
executing '$prog --reset'.
The log output will be stored in...
$astlogdir/message.$uniqueid
$astlogdir/debug.$uniqueid
$astlogdir/dtmf.$uniqueid
$astlogdir/fax.$uniqueid
$astlogdir/security.$uniqueid
$astlogdir/pjsip_history.$uniqueid
$astlogdir/sip_history.$uniqueid
Some minor tweaks were made to chan_sip, and res_pjsip_history
so their history output could be send to a log channel as packets
are captured.
A minor tweak was also made to manager so events are output to verbose
when "manager set debug on" is issued.
Change-Id: I799f8e5013b86dc5282961b27383d134bf09e543
After a SIP_CODEC_INBOUND in the dialplan, do not continue with cached formats
but remember the joint format. Cached formats contain default parameters,
often create an empty fmtp line. However, a joint format might have passed
format_get_joint(.) in a res_format_attr_* module (like Opus Codec) and
contain the resulting format parameters from a SDP negotiation.
ASTERISK-26691 #close
Change-Id: I35712d98a793d4c3efdd156cec57deab9014b1dc
The CHANNEL() dialplan function implementation for PJSIP allows
querying of PJSIP specific information. This used the channel
passed in to get the PJSIP session and associated information.
It is possible for this channel to be masqueraded and end
up as a different channel type by the time the information
request is actually acted upon.
This change retrieves the PJSIP session safely and accesses
data from it (including channel). This provides a guarantee
that the session and channel will not be altered when the
request is being acted upon.
ASTERISK-26673
Change-Id: I335e12b89e1820cafdd92b3e7526b8ba649eb7e6
unicast_rtp_request() could pass an uninitialized 'us' parameter to
ast_ouraddrfor(). If ast_ouraddrfor() returns an error then the 'us'
parameter may not get initialized. Thus when the code tries to save the
'us' parameter to the local address we could try to copy a ridiculous
sized memory buffer and segfault.
* Made pass an initialized 'us' parameter to ast_ouraddrfor() and abort
the UnicastRTP channel request if it fails.
ASTERISK-26672
Change-Id: I1ef7a7c09f4da4f15dcb6de660d2bcac5f2a95c0
In some situations TCP threads may become frozen. This creates the
possibility that Asterisk could segfault if they become unfrozen after
chan_sip has been dlclose'd. This reorders the unload_module process to
allow abort if threads do not exit within 5 seconds.
High level order as follows:
1) Unregister from the core to stop new requests.
2) Signal threads to stop
3) Clear config based tables (but do not free the table itself).
4) Verify that threads have shutdown, cancel unload if not.
5) Clean all remaining resources.
ASTERISK-26586
Change-Id: Ie23692041d838fbd35ece61868f4c640960ff882
RFC says SIP headers look like:
HCOLON = *( SP / HTAB ) ":" SWS
SWS = [LWS] ; sep whitespace
LWS = [*WSP CRLF] 1*WSP ; linear whitespace
WSP = SP / HTAB ; from rfc2234
chan_sip implemented this:
HCOLON = *( LOWCTL / SP ) ":" SWS
LOWCTL = %x00-1F ; CTL without DEL
This discrepancy meant that SIP proxies in front of Asterisk with
chan_sip could pass on unknown headers with \x00-\x1F in them, which
would be treated by Asterisk as a different (known) header. For
example, the "To\x01:" header would gladly be forwarded by some proxies
as irrelevant, but chan_sip would treat it as the relevant "To:" header.
Those relying on a SIP proxy to scrub certain headers could mistakenly
get unexpected and unvalidated data fed to Asterisk.
This change fixes so chan_sip only considers SP/HTAB as valid tokens
before the colon, making it agree on the headers with other speakers of
SIP.
ASTERISK-26433 #close
AST-2016-009
Change-Id: I78086fbc524ac733b8f7f78cb423c91075fd489b
Per RFC 7118 5.2, the SIP URI 'transport' parameter should advertise
'ws' when WebSockets are to be used as the transport. This applies to
both secure and insecure WebSockets.
There were two bugs in Asterisk with respect to this:
(1) The most egregious occurs in res_pjsip. There, we advertise 'ws' for
insecure websockets and 'wss' for secure websockets. While this
would seem to make sense - since 'WS' and 'WSS' are used for the Via
Transport parameter - this is not the case for the SIP URI. This
patch corrects that by registering the secure websockets with
pjproject using the shorthand 'WS', and by returning 'ws' when asked
for the transport parameter. Note that in pjproject, it is perfectly
valid to have multiple transports use the same shorthand.
(2) In chan_sip, we return an upper-case version of the transport 'WS'
instead of 'ws'. Since we should be strict in what we send and
liberal in what we accept (within reason), this patch lower-cases
the transport before appending it to the parameter.
ASTERISK-24330 #close
Reported by: cervajs, Inaki Baz Castillo
Change-Id: Iff77b645f8cc3b7cd35168a6676c26b147f22f42
If a TCP/TLS connection was pending (not accepted and not timed out) during
unload of chan_sip, Asterisk would segfault when trying to send a signal to
a thread whose thread ID hadn't been recorded yet. This commit fixes that by
recording the thread ID before calling the blocking connect() syscall.
This was a regression introduced by 776a14386a.
The above wasn't enough to fix the segfault, which was now delayed to the
point where connect() timed out. Therefore, it was necessary to also remove
the SA_RESTART flag from the SIGURG sigaction so that pthread_kill() could be
used to interruput the connect() syscall.
This was a regression introduced by 5d313f51b9.
ASTERISK-26586 #close
Change-Id: I76fd9d47d56e4264e2629bce8ec15fecba673e7b
The sending codec is switched to the receiving codec and then
is switched back to the best native codec on EVERY receiving RTP packets.
This is because after call of ast_channel_set_rawwriteformat there is call
of ast_set_write_format which calls set_format which sets rawwriteformat
to the best native format.
This patch adds a new function ast_set_write_format_path which set
specific write path on channel and uses this function to switch
the sending codec.
ASTERISK-26603 #close
Change-Id: I5b7d098f8b254ce8f45546e6c36e5d324737f71d
Fix ASTERISK-26565 by adding ast_rtp_instance_stop before
rtp instance destroy for chan_unistim. Also several fixes
for displayed text translation.
Change-Id: If42a03eea09bd1633471406bdc829cf98bf6affc
This reverts commit 93332cb1d0.
Unfortunately, the aforementioned commit caused a regression (incoming calls
would eventually disconnect). Thus it is being removed.
ASTERISK-26523 #close
ASTERISK-25270
Change-Id: Ibf5586adc303073a8eac667a4cbfdb6be184a64d
If in sip.conf (general section) set option register_retry_403=no,
the command "sip show settings" return value:
Outbound reg. retry 403:0
If in sip.conf (general section) set option register_retry_403=yes,
the command "sip show settings" return value:
Outbound reg. retry 403:-1
* In static char "sip show settings" for "Outbound.reg. retry 403"
option use AST_CLI_YESNO
ASTERISK-26476 #close
Change-Id: I3c14272f05f1067bd2aeaa8b3ef9cf8fcb12dcf9
When channel format changes occurred as a result of an RTP
re-negotiation the bridge was not informed this had happened.
As a result the bridge technology was not re-evaluated and the
channel may have been in a bridge technology that was incompatible
with its formats. The bridge is now unbridged and the technology
re-evaluated when this occurs.
The chan_pjsip module also allowed asymmetric codecs for sending
and receiving. This did not work with all devices and caused one
way audio problems. The default has been changed to NOT do this
but to match the sending codec to the receiving codec. For users
who want asymmetric codecs an option has been added, asymmetric_rtp_codec,
which will return chan_pjsip to the previous behavior.
The codecs returned by the chan_pjsip module when queried by
the bridge_native_rtp module were also not reflective of the
actual negotiated codecs. The nativeformats are now returned as
they reflect the actual negotiated codecs.
ASTERISK-26423 #close
Change-Id: I6ec88c6e3912f52c334f1a26983ccb8f267020dc
On heavy loaded system the TCP/TLS incoming calls could be
disconnected by pjproject while these calls are being
processed by asterisk.
This patch uses functions pjsip_inv_add_ref/pjsip_inv_dec_ref
to inform pjproject that an INVITE session is in use.
ASTERISK-26482 #close
Change-Id: Ia2e3e2f75358cdb530252a9ce158af3d5d9fdf33
Previously, the settings videosupport=always and videosupport=yes behaved
identically and unconditionally caused a video offer to be sent in the SDP on
an outgoing call. This was a regression introduced with commit
5a1d90e1fb in Asterisk 1.6.1.
This commit restores correct behavior: videosupport=always causes a video offer
to be sent unconditionally, while videosupport=yes will only offer video on an
outbound channel if the incoming channel it is bridged to also supports video.
That way, the device receiving the outgoing call can display the correct user
interface elements for audio or video and will not unnecessarily show a blank
video window on an audio-only call.
ASTERISK-17470 #close
Change-Id: I782f4409d436114dbc97061c3570c0cd24f7c3ae
In the SIP channel driver chan_sip, auto_comedia was expected to be used in
tandem with auto_force_rport. Or stated differently: Only when auto_force_rport
was chosen (the default), auto_comedia worked. This change allows auto_comedia
to be set independently of the state of (auto_)force_rport. For example,
nat=force_rport,auto_comedia is useful for IPv4/IPv6 Dual Stack deployments
when IPv6 clients are behind a Firewall.
ASTERISK-26457 #close
Change-Id: Ib29d66c6dbb61648e371e01fc36c6978ddae5bc2
In the SIP channel driver chan_sip, the default is "auto_force_rport". When no
NAT was detected, for example in case of IPv6, Asterisk uses the IP address
from the headers within the SIP-REGISTER for subsequent SIP signaling. When
the remote party specifies support for Symmetric Response (RFC 3581) via the
parameter "rport", Asterisk should not extract the port from the SIP headers
but reuse the port of the transport. This did not happen because of a typo.
ASTERISK-26438 #close
Change-Id: If6e7891848aaf96666dee5305695f7c6667cd5a6
HANGUPCAUSE not return 'SIP 200 Ok' when dialed channel answered.
This patch change the call order of ast_queue_control_data
and ast_queue_control in chan_pjsip_incoming_response.
ASTERISK-26396 #close
Reported by: AaronAn
Tested by: AaronAn
Change-Id: Ide2d31723d8d425961e985de7de625694580be61
For the channel driver chan_sip, you specify externhost=example.com in sip.conf
when your Asterisk is behind a NAT and your IP address is assigned dynamically.
Or stated differently: You do not have a static IP address to use "externaddr"
directly. This NAT support is quite handy but just about IPv4. Previously,
Asterisk resolved "externhost" to any IP version. When the first DNS answer
resolved to an IPv6, Asterisk sent an IPv6 in SIP/SDP for origin (o=) and
connection (c=). This happened in outgoing SIP-REGISTER and while answering
SIP-INVITE. If the remote peer is IPv4-only, it might not handle o=/c= with an
IPv6. This change makes sure, no IPv6 is resolved anymore for "externhost".
ASTERISK-18232 #close
Reported by: Jacek Kowalski
Tested by: Alexander Traud
patches:
changes.patch submitted by Alessandro Crespi
Change-Id: If68eedbeff65bd1c1d8a9ed921c02ba464b32dac
Users upgrading from asterisk 13.5 to a later version and who use
realtime with peers that have mailboxes were experiencing runaway
situations that manifested as a continuous stream of taskprocessor
congestion errors, memory leaks and an unresponsive chan_sip.
A related issue was that setting rtcachefriends=no NEVER worked in
asterisk 13 (since the move to stasis). In 13.5 and earlier, when a
peer tried to register, all of the stasis threads would block and
chan_sip would again become unresponsive. After 13.5, the runaway
would happen.
There were a number of causes...
* mwi_event_cb was (indirectly) calling build_peer even though calls to
mwi_event_cb are often caused by build_peer.
* In an effort to prevent chan_sip from being unloaded while messages
were still in flight, destroy_mailboxes was calling
stasis_unsubscribe_and_join but in some cases waited forever for the
final message.
* add_peer_mailboxes wasn't properly marking the existing mailboxes
on a peer as "keep" so build_peer would always delete them all.
* add_peer_mwi_subs was unsubscribing existing mailbox subscriptions
then just creating them again.
All of this was causing a flood of subscribes and unsubscribes on
multiple threads all for the same peer and mailbox.
Fixes...
* add_peer_mailboxes now marks mailboxes correctly and build_peer only
deletes the ones that really are no longer needed by the peer.
* add_peer_mwi_subs now only adds subscriptions marked as "new" instead
of unsubscribing and resubscribing everything. It also adds the peer
object's address to the mailbox instead of its name to the subscription
userdata so mwi_event_cb doesn't have to call build_peer.
With these changes, with rtcachefriends=yes (the most common setting),
there are no leaks, locks, loops or crashes at shutdown.
rtcachefriends=no still causes leaks but at least it doesn't lock, loop
or crash. Since making rtcachefriends=no work wasnt in scope for this
issue, further work will have to be deferred to a separate patch.
Side fixes...
* The ast_lock_track structure had a member named "thread" which gdb
doesn't like since it conflicts with it's "thread" command. That
member was renamed to "thread_id".
ASTERISK-25468 #close
Change-Id: I07519ef7f092629e1e844f855abd279d6475cdd0
Change-Id I1cd33453c77c56c8e1394cd60a6f17bb61c1d957 Enable Session-Timers for
SIP over TCP (and TLS) also disables SIP retransmits in chan_sip for non-UDP
connections, allowing the TCP layer to handle the retransmits. Unfortunately,
this caused sessions to be terminated with a retransmit timeout becasue it
stopped at the point of the first retrans call.
This patch waits for the 64*T1 timer to expire instead.
ASTERISK-19968
Change-Id: I844f26801aada10bc94e9bebe6e151f0a8443204
Previously, the Contact was stored only on initial INVITE and on any
18X and 200. That meant that after re-INVITEs from *us* the Contact
could get updated, but after re-INVITEs from the *peer*, it did not.
This changeset fixes this inconsistency, properly allowing target
refreshes through re-INVITES (RFC3261, 12.2).
If your strictrtp setting allows it, this change allows you to switch
the source IP of a connected/calling device mid-call with a simple
re-INVITE from the new IP.
ASTERISK-26358 #close
Change-Id: Ibb8512054ab27c8c3d2514022568fde943bf2435
In some scenarios dialog_initialize_rtp can be called multiple times on
the same dialog. This can cause RTP instances to be leaked along with
multiple file descriptors for each instance.
This change makes it so the existing RTP instances are destroyed and
not overwritten, stopping the memory leak.
ASTERISK-26272 #close
patches:
ASTERISK-26272-13.patch submitted by Corey Farrell (license 5909)
Change-Id: Id529de1184c68f2f4d254ab41a1f458dafdb5f73
Certain SNOM phones send so-called "optional crypto" in their SDP body.
Regular SRTP setup looks like this:
m=audio 64620 RTP/SAVP 8 0 9 99 3 18 4 101
a=crypto:1 AES_CM_128_HMAC_SHA1_32 inline:...
SNOM-style "optional crypto" looks like this:
m=audio 61438 RTP/AVP 8 0 9 99 3 18 4 101
a=crypto:1 AES_CM_128_HMAC_SHA1_32 inline:...
A crypto line is supplied, but the m-line does not have SAVP.
When res_srtp.so is *not* loaded, then chan_sip.so treats the optional
crypto as regular RTP, but when res_srtp.so *is* loaded, it refuses the
incoming call with the following message:
WARNING: process_sdp: Failed to receive SDP offer/answer with
required SRTP crypto attributes for audio
For platforms that want to start providing SRTP this presents a
compatibility problem.
This changeset lets chan_sip handle the SDP as if no crypto-line was
supplied: i.e. accept the call as regular RTP, just like it did before
res_srtp was loaded.
Now you'll get this informative warning instead:
WARNING: Ignoring crypto attribute in SDP because RTP transport is
insecure
ASTERISK-23989 #close
Reported by: Olle Johansson
Change-Id: I91a15ae05a0296e398d6b65f53bb11afde1d80e2
Historically, Asterisk has always specified annexb=no for the g729 format.
However, when using res_pjsip no format attribute was specified. This patch
makes it so the SDP now contains a format attribute line with annexb=no.
Note, that this means only g729a is negotiated. Even for pass through support.
According to rfc7261 the type of annex used (a or b) is dependent upon the
answerer. However, Asterisk being a back to back user agent makes this tricky
to support at this time, thus we only allow annex 'a' for now.
ASTERISK-26228 #close
patches:
res_format_attr_g729.c submitted by Jason Parker (license 4993)
Change-Id: I76bc20cc0a01af01536e9915afef319c269c22d0
This updates func_channel.c and main/message.c to use a generic xpointer
include instead of including info from each channel driver. Now the
name attribute of info is CHANNEL or CHANNEL_EXAMPLES to be included in
documentation for func_channel. Setting the name attribute of info to
MessageToInfo or MessageFromInfo causes it to be included in the
MessageSend application and AMI action.
Change-Id: I89fd8276a3250824241a618009714267d3a8d1ea
Packets are read regulary, when there is no data in buffer fr->frametype
is AST_FRAME_NULL. There was no check of frametype and lastrtprx always
updated and, therefore, rtptimeout did not work at all.
ASTERISK-25270 #close
Change-Id: If3b5ca0dbb822582a86eb7d01dcae4e83448c41d
* Following the example of the PJSIP channel driver, the channel
technology specific documentation has been moved to the respective
channel drivers that provide that functionality. This has the benefit
of locating the documentation of items with those modules that provide
it.
* Examples of using the CHANNEL function for both standard items as well
as for PJSIP have been added.
* The 'max_forwards' standard item has been documented.
Change-Id: Ifaa79a232c8ac99cf8da6ef6cc7815d398b1b79b
This patch adds a new PJSIP specific dialplan function,
PJSIP_SEND_SESSION_REFRESH. When invoked on a PJSIP channel, the media
session will be refreshed via either an UPDATE or re-INVITE request.
When used in conjunction with the PJSIP_MEDIA_OFFER dialplan function,
the formats in use on a PJSIP channel can be re-negotiated and changed
dynamically after call setup.
ASTERISK-26277 #close
Change-Id: Ib98fe09ba889aafe26d58d32f0fd1323f8fd9b1b
Asterisk defaults to timers=accept/refresher=uas. In that scenario, only in that
scenario, Sessions-Timers (RFC 4028) had no effect via TCP. This change enables
Session-Timers for SIP over TCP (and for SIP over TLS).
However with longer international calls via TCP, the SIP channel might break,
because all hops on the Internet route must stay online (have not a single power
outage, for example). Therefore with Session-Timers enabled (which are enabled
at default), you might see dropped calls. Consequently even with this change,
you might be better-off going for session-timers=refuse in your sip.conf.
ASTERISK-19968 #close
Change-Id: I1cd33453c77c56c8e1394cd60a6f17bb61c1d957
sip_show_channels locks the dialogs container first then locks each
sip_pvt so it can spit out the details. The rest of sip dialog
processing locks the sip_pvt first then locks the dialogs container
if it needs to. Both lock in the order they need but deadlocks can
result. To fix, sip_show_channels and sip_show_channelstats have
been converted to use an iterator rather than ao2_callback. This way
the container is locked only while getting the next entry and is
unlocked when the callback is called.
ASTERISK-23013 #close
Change-Id: Id9980419909e811f89484950ed46ef117b9eb990
The dahdi_handle_dtmf() and my_handle_dtmf() have the potential to
deadlock if an incoming fax happens during the Playback or similar
application.
* Fixed the potential deadlock by not calling ast_async_goto() with the
channel lock held.
ASTERISK-26216 #close
Reported by: Richard Mudgett
Change-Id: I9144b84ade5f96690996624ec8a2d40c56af40aa
George Joseph
Alexander Traud
Torrey Searle
Richard Mudgett
Joshua Colp
Sean Bright
Vitezslav Novy
Thierry Magnien
Jenkins2
Jean Aunis
Richard Begg
Daniel Journo
Igor Goncharovsky
zuul
Norbert Varga
Corey Farrell
Badalyan Vyacheslav
Walter Doekes
Matt Jordan
Michael Kuron
Alexei Gradinari
Kevin Harwell
Sebastian Gutierrez
Grachev Sergey
Moises Silva
Aaron An
Steve Davies
Walter Doekes
cjack