6 Commits (eda125f98dd1a11f41b7a89f96fbe3fb754c8963)

Author	SHA1	Message	Date
Mark Michelson	dcf1ad14da	Add module support level to ast_module_info structure. Print it in CLI "module show" . ... ASTERISK-23919 #close Reported by Malcolm Davenport Review: https://reviewboard.asterisk.org/r/3802 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419592 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
David M. Lee	2de42c2a25	Multiple revisions 399887,400138,400178,400180-400181 ... ........ r399887 | dlee | 2013-09-26 10:41:47 -0500 (Thu, 26 Sep 2013) | 1 line Minor performance bump by not allocate manager variable struct if we don't need it ........ r400138 | dlee | 2013-09-30 10:24:00 -0500 (Mon, 30 Sep 2013) | 23 lines Stasis performance improvements This patch addresses several performance problems that were found in the initial performance testing of Asterisk 12. The Stasis dispatch object was allocated as an AO2 object, even though it has a very confined lifecycle. This was replaced with a straight ast_malloc(). The Stasis message router was spending an inordinate amount of time searching hash tables. In this case, most of our routers had 6 or fewer routes in them to begin with. This was replaced with an array that's searched linearly for the route. We more heavily rely on AO2 objects in Asterisk 12, and the memset() in ao2_ref() actually became noticeable on the profile. This was #ifdef'ed to only run when AO2_DEBUG was enabled. After being misled by an erroneous comment in taskprocessor.c during profiling, the wrong comment was removed. Review: https://reviewboard.asterisk.org/r/2873/ ........ r400178 | dlee | 2013-09-30 13:26:27 -0500 (Mon, 30 Sep 2013) | 24 lines Taskprocessor optimization; switch Stasis to use taskprocessors This patch optimizes taskprocessor to use a semaphore for signaling, which the OS can do a better job at managing contention and waiting that we can with a mutex and condition. The taskprocessor execution was also slightly optimized to reduce the number of locks taken. The only observable difference in the taskprocessor implementation is that when the final reference to the taskprocessor goes away, it will execute all tasks to completion instead of discarding the unexecuted tasks. For systems where unnamed semaphores are not supported, a really simple semaphore implementation is provided. (Which gives identical performance as the original taskprocessor implementation). The way we ended up implementing Stasis caused the threadpool to be a burden instead of a boost to performance. This was switched to just use taskprocessors directly for subscriptions. Review: https://reviewboard.asterisk.org/r/2881/ ........ r400180 | dlee | 2013-09-30 13:39:34 -0500 (Mon, 30 Sep 2013) | 28 lines Optimize how Stasis forwards are dispatched This patch optimizes how forwards are dispatched in Stasis. Originally, forwards were dispatched as subscriptions that are invoked on the publishing thread. This did not account for the vast number of forwards we would end up having in the system, and the amount of work it would take to walk though the forward subscriptions. This patch modifies Stasis so that rather than walking the tree of forwards on every dispatch, when forwards and subscriptions are changed, the subscriber list for every topic in the tree is changed. This has a couple of benefits. First, this reduces the workload of dispatching messages. It also reduces contention when dispatching to different topics that happen to forward to the same aggregation topic (as happens with all of the channel, bridge and endpoint topics). Since forwards are no longer subscriptions, the bulk of this patch is simply changing stasis_subscription objects to stasis_forward objects (which, admittedly, I should have done in the first place.) Since this required me to yet again put in a growing array, I finally abstracted that out into a set of ast_vector macros in asterisk/vector.h. Review: https://reviewboard.asterisk.org/r/2883/ ........ r400181 | dlee | 2013-09-30 13:48:57 -0500 (Mon, 30 Sep 2013) | 28 lines Remove dispatch object allocation from Stasis publishing While looking for areas for performance improvement, I realized that an unused feature in Stasis was negatively impacting performance. When a message is sent to a subscriber, a dispatch object is allocated for the dispatch, containing the topic the message was published to, the subscriber the message is being sent to, and the message itself. The topic is actually unused by any subscriber in Asterisk today. And the subscriber is associated with the taskprocessor the message is being dispatched to. First, this patch removes the unused topic parameter from Stasis subscription callbacks. Second, this patch introduces the concept of taskprocessor local data, data that may be set on a taskprocessor and provided along with the data pointer when a task is pushed using the ast_taskprocessor_push_local() call. This allows the task to have both data specific to that taskprocessor, in addition to data specific to that invocation. With those two changes, the dispatch object can be removed completely, and the message is simply refcounted and sent directly to the taskprocessor. Review: https://reviewboard.asterisk.org/r/2884/ ........ Merged revisions 399887,400138,400178,400180-400181 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400186 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
David M. Lee	e1b959ccbb	Split caching out from the stasis_caching_topic. ... In working with res_stasis, I discovered a significant limitation to the current structure of stasis_caching_topics: you cannot subscribe to cache updates for a single channel/bridge/endpoint/etc. To address this, this patch splits the cache away from the stasis_caching_topic, making it a first class object. The stasis_cache object is shared amongst individual stasis_caching_topics that are created per channel/endpoint/etc. These are still forwarded to global whatever_all_cached topics, so their use from most of the code does not change. In making these changes, I noticed that we frequently used a similar pattern for bridges, endpoints and channels: single_topic ----------------> all_topic ^ | single_topic_cached ----+----> all_topic_cached | +----> cache This pattern was extracted as the 'Stasis Caching Pattern', defined in stasis_caching_pattern.h. This avoids a lot of duplicate code between the different domain objects. Since the cache is now disassociated from its upstream caching topics, this also necessitated a change to how the 'guaranteed' flag worked for retrieving from a cache. The code for handling the caching guarantee was extracted into a 'stasis_topic_wait' function, which works for any stasis_topic. (closes issue ASTERISK-22002) Review: https://reviewboard.asterisk.org/r/2672/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395954 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Richard Mudgett	b5f18d1677	Fix menuselect display for stasis modules. ... The menuselect parser is very simple. It looks for AST_MODULE_INFO and uses any quoted string on that line as the module summary display. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392777 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
David M. Lee	b97c71bb11	Fix shutdown assertions in stasis-core ... In r388005, macros were introduced to consistently define message types. This added an assert if a message type was used either before it was initialized or after it had been cleaned up. It turns out that this assertion fires during shutdown. This actually exposed a hidden shutdown ordering problem. Since unsubscribing is asynchronous, it's possible that the message types used by the subscription could be freed before the final message of the subscription was processed. This patch adds stasis_subscription_join(), which blocks until the last message has been processed by the subscription. Since joining was most commonly done right after an unsubscribe, a stasis_unsubscribe_and_join() convenience function was also added. Similar functions were also added to the stasis_caching_topic and stasis_message_router, since they wrap subscriptions and have similar problems. Other code in trunk was refactored to join() where appropriate, or at least verify that the subscription was complete before being destroyed. Review: https://reviewboard.asterisk.org/r/2540 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389011 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
David M. Lee	946eb5ede0	Example of how to use the Stasis message bus ... In order to get people familiar with the Stasis message bus, it would be useful to have something of a tutorial. Since I'm not clever enough to think of some cool integration we could do with Twitter, I settled for something that might actually be useful. This patch adds a res_statsd.so module, which implements a basic statsd[1] client. Statsd is a very simple statistics gathering server, which can publish its results to a backend graphing engine, like Graphite[2]. There are several different Statsd server implementations[3], so you can pick what works best for your environment. The actual example of how to use the Stasis message bus is in res_chan_stats.so. This module demonstrates how to use subscriptions and the message router by monitoring messages and posting channels stats to the statsd server. A wiki page walking through res_chan_stats.so is forthcoming. [1]: https://github.com/etsy/statsd/ [2]: http://graphite.readthedocs.org/en/latest/ [3]: http://joemiller.me/2011/09/21/list-of-statsd-server-implementations/ Review: https://reviewboard.asterisk.org/r/2460/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@386624 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago