31 Commits (eda125f98dd1a11f41b7a89f96fbe3fb754c8963)

Author	SHA1	Message	Date
Matthew Jordan	d79c68d3fb	main/stasis: Allow subscriptions to use a threadpool for message delivery ... Prior to this patch, all Stasis subscriptions would receive a dedicated thread for servicing published messages. In contrast, prior to r400178 (see review https://reviewboard.asterisk.org/r/2881/), the subscriptions shared a thread pool. It was discovered during some initial work on Stasis that, for a low subscription count with high message throughput, the threadpool was not as performant as simply having a dedicated thread per subscriber. For situations where a subscriber receives a substantial number of messages and is always present, the model of having a dedicated thread per subscriber makes sense. While we still have plenty of subscriptions that would follow this model, e.g., AMI, CDRs, CEL, etc., there are plenty that also fall into the following two categories: * Large number of subscriptions, specifically those tied to endpoints/peers. * Low number of messages. Some subscriptions exist specifically to coordinate a single message - the subscription is created, a message is published, the delivery is synchronized, and the subscription is destroyed. In both of the latter two cases, creating a dedicated thread is wasteful (and in the case of a large number of peers/endpoints, harmful). In those cases, having shared delivery threads is far more performant. This patch adds the ability of a subscriber to Stasis to choose whether or not their messages are dispatched on a dedicated thread or on a threadpool. The threadpool is configurable through stasis.conf. Review: https://reviewboard.asterisk.org/r/4193 ASTERISK-24533 #close Reported by: xrobau Tested by: xrobau ........ Merged revisions 428681 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@428687 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	a2ce95d9d2	accountcode: Slightly change accountcode propagation. ... The previous behavior was to simply set the accountcode of an outgoing channel to the accountcode of the channel initiating the call. It was done this way a long time ago to allow the accountcode set on the SIP/100 channel to be propagated to a local channel so the dialplan execution on the Local;2 channel would have the SIP/100 accountcode available. SIP/100 -> Local;1/Local;2 -> SIP/200 Propagating the SIP/100 accountcode to the local channels is very useful. Without any dialplan manipulation, all channels in this call would have the same accountcode. Using dialplan, you can set a different accountcode on the SIP/200 channel either by setting the accountcode on the Local;2 channel or by the Dial application's b(pre-dial), M(macro) or U(gosub) options, or by the FollowMe application's b(pre-dial) option, or by the Queue application's macro or gosub options. Before Asterisk v12, the altered accountcode on SIP/200 will remain until the local channels optimize out and the accountcode would change to the SIP/100 accountcode. Asterisk v1.8 attempted to add peeraccount support but ultimately had to punt on the support. The peeraccount support was rendered useless because of how the CDR code needed to unconditionally force the caller's accountcode onto the peer channel's accountcode. The CEL events were thus intentionally made to always use the channel's accountcode as the peeraccount value. With the arrival of Asterisk v12, the situation has improved somewhat so peeraccount support can be made to work. Using the indicated example, the the accountcode values become as follows when the peeraccount is set on SIP/100 before calling SIP/200: SIP/100 ---> Local;1 ---- Local;2 ---> SIP/200 acct: 100 \/ acct: 200 \/ acct: 100 \/ acct: 200 peer: 200 /\ peer: 100 /\ peer: 200 /\ peer: 100 If a channel already has an accountcode it can only change by the following explicit user actions: 1) A channel originate method that can specify an accountcode to use. 2) The calling channel propagating its non-empty peeraccount or its non-empty accountcode if the peeraccount was empty to the outgoing channel's accountcode before initiating the dial. e.g., Dial and FollowMe. The exception to this propagation method is Queue. Queue will only propagate peeraccounts this way only if the outgoing channel does not have an accountcode. 3) Dialplan using CHANNEL(accountcode). 4) Dialplan using CHANNEL(peeraccount) on the other end of a local channel pair. If a channel does not have an accountcode it can get one from the following places: 1) The channel driver's configuration at channel creation. 2) Explicit user action as already indicated. 3) Entering a basic or stasis-mixing bridge from a peer channel's peeraccount value. You can specify the accountcode for an outgoing channel by setting the CHANNEL(peeraccount) before using the Dial, FollowMe, and Queue applications. Queue adds the wrinkle that it will not overwrite an existing accountcode on the outgoing channel with the calling channels values. Accountcode and peeraccount values propagate to an outgoing channel before dialing. Accountcodes also propagate when channels enter or leave a basic or stasis-mixing bridge. The peeraccount value only makes sense for mixing bridges with two channels; it is meaningless otherwise. * Made peeraccount functional by changing accountcode propagation as described above. * Fixed CEL extracting the wrong ie value for the peeraccount. This was done intentionally in Asterisk v1.8 when that version had to punt on peeraccount. * Fixed a few places dealing with accountcodes that were reading from channels without the lock held. AFS-65 #close Review: https://reviewboard.asterisk.org/r/3601/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419520 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Jonathan Rose	d00882108f	res_pjsip_refer: Fix bugs involving Parking/PJSIP/transfers ... PJSIP would never send the final 200 Notify for a blind transfer when transferring to parking. This patch fixes that. In addition, it fixes a reference leak when performing blind transfers to non-bridging extensions. Review: https://reviewboard.asterisk.org/r/3485/ ........ Merged revisions 414400 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@414403 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Kinsey Moore	abd3e4040b	Allow Asterisk to compile under GCC 4.10 ... This resolves a large number of compiler warnings from GCC 4.10 which cause the build to fail under dev mode. The vast majority are signed/unsigned mismatches in printf-style format strings. ........ Merged revisions 413586 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 413587 from http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged revisions 413588 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@413589 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Jonathan Rose	57372e61d2	Parking: Add 'AnnounceChannel' argument to manager action 'Park' ... (closes ASTERISK-23397) Reported by: Denis Review: https://reviewboard.asterisk.org/r/3446/ ........ Merged revisions 413196 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@413197 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Scott Griepentrog	80ef9a21b9	uniqueid: channel linkedid, ami, ari object creation with id's ... Much needed was a way to assign id to objects on creation, and much change was necessary to accomplish it. Channel uniqueids and linkedids are split into separate string and creation time components without breaking linkedid propgation. This allowed the uniqueid to be specified by the user interface - and those values are now carried through to channel creation, adding the assignedids value to every function in the chain including the channel drivers. For local channels, the second channel can be specified or left to default to a ;2 suffix of first. In ARI, bridge, playback, and snoop objects can also be created with a specified uniqueid. Along the way, the args order to allocating channels was fixed in chan_mgcp and chan_gtalk, and linkedid is no longer lost as masquerade occurs. (closes issue ASTERISK-23120) Review: https://reviewboard.asterisk.org/r/3191/ ........ Merged revisions 410157 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410158 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Kevin Harwell	28c0cb28d0	channel locking: Add locking for channel snapshot creation ... Original commit message by mmichelson (asterisk 12 r403311): "This adds channel locks around calls to create channel snapshots as well as other functions which operate on a channel and then end up creating a channel snapshot. Functions that expect the channel to be locked prior to being called have had their documentation updated to indicate such." The above was initially committed and then reverted at r403398. The problem was found to be in core_local.c in the publish_local_bridge_message function. The ast_unreal_lock_all function locks and adds a reference to the returned channels and while they were being unlocked they were not being unreffed when no longer needed. Fixed by unreffing the channels. Also in bridge.c a lock was obtained on "other->chan", but then an attempt was made to unlock "other" and not the previously locked channel. Fixed by unlocking "other->chan" (closes issue ASTERISK-22709) Reported by: John Bigelow ........ Merged revisions 404237 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404260 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Jonathan Rose	63b2c28c4b	Transfers: Make Asterisk set ATTENDEDTRANSFER/BLINDTRANSFER more reliably ... There were still a few cases in which ATTENDEDTRANSFER and BLINDTRANSFER wouldn't be set on channels involved with blind and attended transfers. This would happen with features that were initialized by channel driver specific mechanisms in multiparty calls. This patch resolves those cases while attempted to keep the behavior for setting those variables as consistent as possible. (closes issue AFS-24) Review: https://reviewboard.asterisk.org/r/3040/ ........ Merged revisions 403781 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403783 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
David M. Lee	1212906351	Reverting r403311. It's causing ARI tests to hang. ... ........ Merged revisions 403398 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403404 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Mark Michelson	8e8b329e14	Add channel locking for channel snapshot creation. ... This adds channel locks around calls to create channel snapshots as well as other functions which operate on a channel and then end up creating a channel snapshot. Functions that expect the channel to be locked prior to being called have had their documentation updated to indicate such. ........ Merged revisions 403311 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403314 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Richard Mudgett	8f03a463e1	res_parking: Give parking timeout comebacktoorigin channel DTMF features. ... Parking timeouts did not set any DTMF features for the channel calling the parker back. * Added code to set the parkedcalltransfers, parkedcallreparking, parkedcallhangup, and parkedcallrecording options appropriately for the channels when a parking timeout occurs. The recall channel DTMF options are set using the BRIDGE_FEATURES channel variable to allow the other timeout options to have the DTMF features available. (closes issue ASTERISK-22630) Reported by: Kevin Harwell Review: https://reviewboard.asterisk.org/r/2942/ ........ Merged revisions 401422 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@401423 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
David M. Lee	2de42c2a25	Multiple revisions 399887,400138,400178,400180-400181 ... ........ r399887 | dlee | 2013-09-26 10:41:47 -0500 (Thu, 26 Sep 2013) | 1 line Minor performance bump by not allocate manager variable struct if we don't need it ........ r400138 | dlee | 2013-09-30 10:24:00 -0500 (Mon, 30 Sep 2013) | 23 lines Stasis performance improvements This patch addresses several performance problems that were found in the initial performance testing of Asterisk 12. The Stasis dispatch object was allocated as an AO2 object, even though it has a very confined lifecycle. This was replaced with a straight ast_malloc(). The Stasis message router was spending an inordinate amount of time searching hash tables. In this case, most of our routers had 6 or fewer routes in them to begin with. This was replaced with an array that's searched linearly for the route. We more heavily rely on AO2 objects in Asterisk 12, and the memset() in ao2_ref() actually became noticeable on the profile. This was #ifdef'ed to only run when AO2_DEBUG was enabled. After being misled by an erroneous comment in taskprocessor.c during profiling, the wrong comment was removed. Review: https://reviewboard.asterisk.org/r/2873/ ........ r400178 | dlee | 2013-09-30 13:26:27 -0500 (Mon, 30 Sep 2013) | 24 lines Taskprocessor optimization; switch Stasis to use taskprocessors This patch optimizes taskprocessor to use a semaphore for signaling, which the OS can do a better job at managing contention and waiting that we can with a mutex and condition. The taskprocessor execution was also slightly optimized to reduce the number of locks taken. The only observable difference in the taskprocessor implementation is that when the final reference to the taskprocessor goes away, it will execute all tasks to completion instead of discarding the unexecuted tasks. For systems where unnamed semaphores are not supported, a really simple semaphore implementation is provided. (Which gives identical performance as the original taskprocessor implementation). The way we ended up implementing Stasis caused the threadpool to be a burden instead of a boost to performance. This was switched to just use taskprocessors directly for subscriptions. Review: https://reviewboard.asterisk.org/r/2881/ ........ r400180 | dlee | 2013-09-30 13:39:34 -0500 (Mon, 30 Sep 2013) | 28 lines Optimize how Stasis forwards are dispatched This patch optimizes how forwards are dispatched in Stasis. Originally, forwards were dispatched as subscriptions that are invoked on the publishing thread. This did not account for the vast number of forwards we would end up having in the system, and the amount of work it would take to walk though the forward subscriptions. This patch modifies Stasis so that rather than walking the tree of forwards on every dispatch, when forwards and subscriptions are changed, the subscriber list for every topic in the tree is changed. This has a couple of benefits. First, this reduces the workload of dispatching messages. It also reduces contention when dispatching to different topics that happen to forward to the same aggregation topic (as happens with all of the channel, bridge and endpoint topics). Since forwards are no longer subscriptions, the bulk of this patch is simply changing stasis_subscription objects to stasis_forward objects (which, admittedly, I should have done in the first place.) Since this required me to yet again put in a growing array, I finally abstracted that out into a set of ast_vector macros in asterisk/vector.h. Review: https://reviewboard.asterisk.org/r/2883/ ........ r400181 | dlee | 2013-09-30 13:48:57 -0500 (Mon, 30 Sep 2013) | 28 lines Remove dispatch object allocation from Stasis publishing While looking for areas for performance improvement, I realized that an unused feature in Stasis was negatively impacting performance. When a message is sent to a subscriber, a dispatch object is allocated for the dispatch, containing the topic the message was published to, the subscriber the message is being sent to, and the message itself. The topic is actually unused by any subscriber in Asterisk today. And the subscriber is associated with the taskprocessor the message is being dispatched to. First, this patch removes the unused topic parameter from Stasis subscription callbacks. Second, this patch introduces the concept of taskprocessor local data, data that may be set on a taskprocessor and provided along with the data pointer when a task is pushed using the ast_taskprocessor_push_local() call. This allows the task to have both data specific to that taskprocessor, in addition to data specific to that invocation. With those two changes, the dispatch object can be removed completely, and the message is simply refcounted and sent directly to the taskprocessor. Review: https://reviewboard.asterisk.org/r/2884/ ........ Merged revisions 399887,400138,400178,400180-400181 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400186 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Richard Mudgett	2a371cd80b	Restore Dial, Queue, and FollowMe 'I' option support. ... The Dial, Queue, and FollowMe applications need to inhibit the bridging initial connected line exchange in order to support the 'I' option. * Replaced the pass_reference flag on ast_bridge_join() with a flags parameter to pass other flags defined by enum ast_bridge_join_flags. * Replaced the independent flag on ast_bridge_impart() with a flags parameter to pass other flags defined by enum ast_bridge_impart_flags. * Since the Dial, Queue, and FollowMe applications are now the only callers of ast_bridge_call() and ast_bridge_call_with_flags(), changed the calling contract to require the initial COLP exchange to already have been done by the caller. * Made all callers of ast_bridge_impart() check the return value. It is important. As a precaution, I also made the compiler complain now if it is not checked. * Did some cleanup in parking_tests.c as a result of checking the ast_bridge_impart() return value. An independent, but associated change is: * Reduce stack usage in ast_indicate_data() and add a dropping redundant connected line verbose message. (closes issue ASTERISK-22072) Reported by: Joshua Colp Review: https://reviewboard.asterisk.org/r/2845/ ........ Merged revisions 399136 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399138 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Richard Mudgett	477dea4661	Bridge API: Set a cause code on a channel when it is ejected from a bridge. ... The cause code needs to be passed from the disconnecting channel to the bridge peers if the disconnecting channel dissolves the bridge. * Made the call to an app_agent_pool agent disconnect with the busy cause code if the agent does not ack the call in time or hangs up before acking the call. (closes issue ASTERISK-22042) Reported by: Matt Jordan Review: https://reviewboard.asterisk.org/r/2772/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397472 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Richard Mudgett	d213dfa30f	Fix several interrelated issues dealing with the holding bridge technology. ... * Added an option flags parameter to interval hooks. Interval hooks now can specify if the callback will affect the media path or not. * Added an option flags parameter to the bridge action custom callback. The action callback now can specify if the callback will affect the media path or not. * Made the holding bridge technology reexamine the participant idle mode option whenever the entertainment is restarted. * Fixed app_agent_pool waiting agents needlessly starting and stopping MOH every second by specifying the heartbeat interval hook as not affecting the media path. * Fixed app_agent_pool agent alert from restarting the MOH after the alert beep. The agent entertainment is now changed from MOH to silence after the alert beep. * Fixed holding bridge technology to defer starting the entertainment. It was previously a mixture of immediate and deferred. * Fixed holding bridge technology to immediately stop the entertainment. It was previously a mixture of immediate and deferred. If the channel left the bridging system, any deferred stopping was discarded before taking effect. * Miscellaneous holding bridge technology rework coding improvements. Review: https://reviewboard.asterisk.org/r/2761/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397294 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Kinsey Moore	56aea1c030	Allow res_parking to be unloadable ... This change protects accesses of res_parking such that it can unload safely once transient uses of its registered functions are complete. The parking API has been restructured such that its consumers do not have access to the vtable exposed by the parking provider, but instead route through stubs to prevent consumers from holding on to function pointers. This adds calls to all the parking unload functions and moves application loading and unloading into functions in parking_applications.c similar to the rest of the parts of res_parking. Review: https://reviewboard.asterisk.org/r/2763/ (closes issue ASTERISK-22142) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396890 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Richard Mudgett	e47d3db365	Doxygen comment tweaks. ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396857 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Richard Mudgett	6b062d9afd	Parking: Eliminate local channel name hack to get peer channel. ... (closes issue ASTERISK-22034) Reported by: Matt Jordan git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396802 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Matthew Jordan	5c4b482471	Support externally initiated parking requests; remove some dead code ... This patch does the following: * It adds support for externally initiated parking requests. In particular, chan_skinny has a protocol level message that initiates a call park. This patch now supports that option, as well as the protocol specific mechanisms in chan_dahdi/sig_analog and chan_mgcp. * A parking bridge features virtual table has been added that provides access to the parking functionality that the Bridging API needs. This includes requests to park an entire 'call' (with little or no additional information, thank you chan_skinny), perform a blind transfer to a parking extension, determine if an extension is a parking extension, as well as the actual "do the parking" request from the Bridging API. * Refactoring in chan_mgcp, chan_skinny, and chan_dahdi to make use of the new functions * The removal of some - but not all - dead parking code from features.c This also fixed blind transferring a multi-party bridge to a parking lot (which was implemented, but had at least one code path where using the parking features kK might not have worked) Review: https://reviewboard.asterisk.org/r/2710 (closes issue ASTERISK-22134) Reported by: Matt Jordan git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396028 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Richard Mudgett	c017d5e6a3	Remove the unsafe bridge parameter from ast_bridge_hook_callback's. ... Most hook callbacks did not need the bridge parameter. The pointer value could become invalid if the channel is moved to another bridge while it is executing. * Fixed some issues in feature_attended_transfer() as a result. * Reduce the bridge inhibit count in attended_transfer_properties_shutdown() after it has restored the bridge channel hooks. * Removed basic bridge requirement on feature_blind_transfer(). It does not require the basic bridge like feature_attended_transfer(). git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395574 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Richard Mudgett	50aba6be36	Improved feature limits interval hook implementaion. ... * Fixed feature limits to not use special members of struct ast_bridge_features. * Fixed memory leak in off nominal paths of bridge_builtin_set_limits(). * Fixed off nominal path in ast_bridge_features_limits_construct() freeing unallocated memory if it was not called by bridge_builtin_set_limits(). * Made bridge_builtin_interval_features.so unloadable. * Simplified parking's use of its duration interval hook. * Made BridgeWait S option not depend upon another module being loaded. (closes issue ASTERISK-22107) Reported by: Matt Jordan Review: https://reviewboard.asterisk.org/r/2701/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395559 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Matthew Jordan	cafc115896	A great big renaming patch ... This patch renames the bridging* files to bridge*. This may seem pedantic and silly, but it fits better in line with current Asterisk naming conventions: * channel is not "channeling" * monitor is not "monitoring" etc. A bridge is an object. It is a first class citizen in Asterisk. "Bridging" is the act of using a bridge on a set of channels - and the API that fulfills that role is more than just the action. (closes issue ASTERISK-22130) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395378 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Matthew Jordan	9d8a5ceb02	Move after bridge callbacks into their own file ... One more major refactoring to go. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395367 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Matthew Jordan	1d1650f572	Update bridge_channel refactorings; export bridge_ symbol ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395295 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Matthew Jordan	d91dc6d1a8	Perform the initial renaming of the Bridging API ... This patch does the following: * It pulls out bridge_channel and puts it into its own translation unit * It adds public and protected headers for bridging_channel. Protected functions are appropriate only for the Bridging API and sub-classes of a bridge. (issue ASTERISK-22130) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395253 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Jonathan Rose	93ed5ef0ff	res_parking: Replace Parker snapshots with ParkerDialString ... This process also involved a large amount of rework regarding how to redial the Parker when a channel leaves a parking lot due to timeout. An attended transfer channel variable has been added to attended transfers to extensions that will eventually park (but haven't at the time of transfer) as well. This resolves one of the two BUGBUG comments remaining in res_parking. (issues ASTERISK-21877) Reported by: Matt Jordan Review: https://reviewboard.asterisk.org/r/2638/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393704 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Jonathan Rose	854c4c64fe	res_parking: Add Parking manager action to the new parking system ... (closes issue ASTERISK-21641) Reported by: Matt Jordan Review: https://reviewboard.asterisk.org/r/2573/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392915 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Richard Mudgett	cd40e179a9	Fix potential bridge hook resource leak if the hook install fails. ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392335 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Jonathan Rose	8954661207	res_parking: Automatically generate extensions, hints, etc. ... (closes issue ASTERISK-21645) Reported by: Matt Jordan Review: https://reviewboard.asterisk.org/r/2545/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390849 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Mark Michelson	94d8d0468f	Remove remaining traces of remove_on_pull from hooks and hook APIs. ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390550 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Richard Mudgett	3d63833bd6	Merge in the bridge_construction branch to make the system use the Bridging API. ... Breaks many things until they can be reworked. A partial list: chan_agent chan_dahdi, chan_misdn, chan_iax2 native bridging app_queue COLP updates DTMF attended transfers Protocol attended transfers git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389378 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago