asterisk

Commit Graph

Author	SHA1	Message	Date
Naveen Albert	d1fb397cfc	general: Fix broken links. This fixes a number of broken links throughout the tree, mostly caused by wiki.asterisk.org being replaced with docs.asterisk.org, which should eliminate the need for sporadic fixes as in `f28047db36`. Resolves: #430	2 years ago
Sean Bright	c040179fcf	doc: Update IP Quality of Service links. Fixes #328	2 years ago
Mike Bradeen	2291f196c5	res_pjsip: update qualify_timeout documentation with DNS note The documentation on qualify_timeout does not explicitly state that the timeout includes any time required to perform any needed DNS queries on the endpoint. If the OPTIONS response is delayed due to the DNS query, it can still render an endpoint as Unreachable if the net time is enough for qualify_timeout to expire. Resolves: #352	2 years ago
Sean Bright	c52b4ce11c	res_pjsip: Enable TLS v1.3 if present. Fixes #221 UserNote: res_pjsip now allows TLS v1.3 to be enabled if supported by the underlying PJSIP library. The bundled version of PJSIP supports TLS v1.3.	2 years ago
Naveen Albert	d1bec3623e	res_pjsip_session: Add overlap_context option. Adds the overlap_context option, which can be used to explicitly specify a context to use for overlap dialing extension matches, rather than forcibly using the context configured for the endpoint. ASTERISK-30262 #close Change-Id: Ibbcd4a8b11402428a187fb56b8d4e7408774a0db	3 years ago
Mike Bradeen	4095a382da	chan_sip: Remove deprecated module. ASTERISK-30297 Change-Id: Ic700168c80b68879d9cee8bb07afe2712fb17996	3 years ago
Michael Kuron	841107f294	res_pjsip_aoc: New module for sending advice-of-charge with chan_pjsip chan_sip supported sending AOC-D and AOC-E information in SIP INFO messages in an "AOC" header in a format that was originally defined by Snom. In the meantime, ETSI TS 124 647 introduced an XML-based AOC format that is supported by devices from multiple vendors, including Snom phones with firmware >= 8.4.2 (released in 2010). This commit adds a new res_pjsip_aoc module that inserts AOC information into outgoing messages or sends SIP INFO messages as described below. It also fixes a small issue in res_pjsip_session which didn't always call session supplements on outgoing_response. * AOC-S in the 180/183/200 responses to an INVITE request * AOC-S in SIP INFO (if a 200 response has already been sent or if the INVITE was sent by Asterisk) * AOC-D in SIP INFO * AOC-D in the 200 response to a BYE request (if the client hangs up) * AOC-D in a BYE request (if Asterisk hangs up) * AOC-E in the 200 response to a BYE request (if the client hangs up) * AOC-E in a BYE request (if Asterisk hangs up) The specification defines one more, AOC-S in an INVITE request, which is not implemented here because it is not currently possible in Asterisk to have AOC data ready at this point in call setup. Once specifying AOC-S via the dialplan or passing it through from another SIP channel's INVITE is possible, that might be added. The SIP INFO requests are sent out immediately when the AOC indication is received. The others are inserted into an appropriate outgoing message whenever that is ready to be sent. In the latter case, the XML is stored in a channel variable at the time the AOC indication is received. Depending on where the AOC indications are coming from (e.g. PRI or AMI), it may not always be possible to guarantee that the AOC-E is available in time for the BYE. Successfully tested AOC-D and both variants of AOC-E with a Snom D735 running firmware 10.1.127.10. It does not appear to properly support AOC-S however, so that could only be tested by inspecting SIP traces. ASTERISK-21502 #close Reported-by: Matt Jordan <mjordan@digium.com> Change-Id: Iebb7ad0d5f88526bc6629d3a1f9f11665434d333	3 years ago
Marcel Wagner	97d1613afa	res_pjsip: Fix typo in from_domain documentation This fixes a small typo in the from_domain documentation on the endpoint documentation ASTERISK-30328 #close Change-Id: Ia6f0897c3f5cab899ef2cde6b3ac07265b8beb21	3 years ago
Henning Westerholt	7b2d3a6411	res_pjsip: return all codecs on a re-INVITE without SDP Currently chan_pjsip on receiving a re-INVITE without SDP will only return the codecs that are previously negotiated and not offering all enabled codecs. This causes interoperability issues with different equipment (e.g. from Cisco) for some of our customers and probably also in other scenarios involving 3PCC infrastructure. According to RFC 3261, section 14.2 we SHOULD return all codecs on a re-INVITE without SDP The PR proposes a new parameter to configure this behaviour: all_codecs_on_empty_reinvite. It includes the code, documentation, alembic migrations, CHANGES file and example configuration additions. ASTERISK-30193 #close Change-Id: I69763708d5039d512f391e296ee8a4d43a1e2148	3 years ago
Maximilian Fridrich	14826a8038	res_pjsip: Add mediasec capabilities. This patch adds support for mediasec SIP headers and SDP attributes. These are defined in RFC 3329, 3GPP TS 24.229 and draft-dawes-sipcore-mediasec-parameter. The new features are implemented so that a backbone for RFC 3329 is present to streamline future work on RFC 3329. With this patch, Asterisk can communicate with Deutsche Telekom trunks which require these fields. ASTERISK-30032 Change-Id: Ia7f5b5ba42db18074fdd5428c4e1838728586be2	3 years ago
Maximilian Fridrich	492c93861c	res_pjsip: Add 100rel option "peer_supported". This patch adds a new option to the 100rel parameter for pjsip endpoints called "peer_supported". When an endpoint with this option receives an incoming request and the request indicated support for the 100rel extension, then Asterisk will send 1xx responses reliably. If the request did not indicate 100rel support, Asterisk sends 1xx responses normally. ASTERISK-30158 Change-Id: Id6d95ffa8f00dab118e0b386146e99f254f287ad	3 years ago
Joshua C. Colp	cffaf12d19	pjsip: Add TLS transport reload support for certificate and key. This change adds support using the pjsip_tls_transport_restart function for reloading the TLS certificate and key, if the filenames remain unchanged. This is useful for Let's Encrypt and other situations. Note that no restart of the transport will occur if the certificate and key remain unchanged. ASTERISK-30186 Change-Id: I9bc95a6bf791830a9491ad9fa43c17d4010028d0	3 years ago
George Joseph	1fa568e76f	Geolocation: chan_pjsip Capability Preview This commit adds res_pjsip_geolocation which gives chan_pjsip the ability to use the core geolocation capabilities. This commit message is intentionally short because this isn't a simple capability. See the documentation at https://wiki.asterisk.org/wiki/display/AST/Geolocation for more information. THE CAPABILITIES IMPLEMENTED HERE MAY CHANGE BASED ON USER FEEDBACK! ASTERISK-30128 Change-Id: Ie2e2bcd87243c2cfabc43eb823d4427c7086f4d9	3 years ago
Kevin Harwell	a3b2daf127	res_pjsip: allow TLS verification of wildcard cert-bearing servers Rightly the use of wildcards in certificates is disallowed in accordance with RFC5922. However, RFC2818 does make some allowances with regards to their use when using subject alt names with DNS name types. As such this patch creates a new setting for TLS transports called 'allow_wildcard_certs', which when it and 'verify_server' are both enabled allows DNS name types, as well as the common name that start with '.' to match as a wildcard. For instance: .example.com will match for: foo.example.com Partial matching is not allowed, e.g. f.example.com, foo..com, etc... And the starting wildcard only matches for a single level. For instance: *.example.com will NOT match for: foo.bar.example.com The new setting is disabled by default. ASTERISK-30072 #close Change-Id: If0be3fdab2e09c2a66bb54824fca406ebaac3da4	3 years ago
Mark Petersen	1cdaeb8161	chan_pjsip: add allow_sending_180_after_183 option added new global config option "allow_sending_180_after_183" that if enabled will preserve 180 after a 183 ASTERISK-29842 Change-Id: I8a53f8c35595b6d16d8e86e241b5f110d92f3d18	4 years ago
Joshua C. Colp	fdc1c750f3	res_pjsip: Always set async_operations to 1. The async_operations setting on a transport configures how many simultaneous incoming packets the transport can handle when multiple threads are polling and waiting on the transport. As we only use a single thread this was needlessly creating incoming packets when set to a non-default value, wasting memory. ASTERISK-30006 Change-Id: I1915973ef352862dc2852a6ba4cfce2ed536e68f	4 years ago
Ben Ford	0724b767a3	AST-2022-002 - res_stir_shaken/curl: Add ACL checks for Identity header. Adds a new configuration option, stir_shaken_profile, in pjsip.conf that can be specified on a per endpoint basis. This option will reference a stir_shaken_profile that can be configured in stir_shaken.conf. The type of this option must be 'profile'. The stir_shaken option can be specified on this object with the same values as before (attest, verify, on), but it cannot be off since having the profile itself implies wanting STIR/SHAKEN support. You can also specify an ACL from acl.conf (along with permit and deny lines in the object itself) that will be used to limit what interfaces Asterisk will attempt to retrieve information from when reading the Identity header. ASTERISK-29476 Change-Id: I87fa61f78a9ea0cd42530691a30da3c781842406	4 years ago
George Joseph	9c36c055c1	xmldoc: Fix issue with xmlstarlet validation Added the missing xml-stylesheet and Xinclude namespace declarations in pjsip_config.xml and pjsip_manager.xml. Updated make_xml_documentation to show detailed errors when xmlstarlet is the validator. It's now run once with the '-q' option to suppress harmless/expected messages and if it actually fails, it's run again without '-q' but with '-e' to show the actual errors. Change-Id: I4bdc9d2ea6741e8d2e5eb82df60c68ccc59e1f5e	4 years ago
George Joseph	2e00b5edbd	Makefile: Allow XML documentation to exist outside source files Moved the xmldoc build logic from the top-level Makefile into its own script "make_xml_documentation" in the build_tools directory. Created a new utility script "get_sourceable_makeopts", also in the build_tools directory, that dumps the top-level "makeopts" file in a format that can be "sourced" from shell sscripts. This allows scripts to easily get the values of common make build variables such as the location of the GREP, SED, AWK, etc. utilities as well as the AST* and library _LIB and _INCLUDE variables. Besides moving logic out of the Makefile, some optimizations were done like removing "third-party" from the list of subdirectories to be searched for documentation and changing some assignments from "=" to ":=" so they're only evaluated once. The speed increase is noticeable. The makeopts.in file was updated to include the paths to REALPATH and DIRNAME. The ./conifgure script was setting them but makeopts.in wasn't including them. So... With this change, you can now place documentation in any"c" source file AND you can now place it in a separate XML file altogether. The following are examples of valid locations: res/res_pjsip.c Using the existing /* DOCUMENTATION / fragment. res/res_pjsip/pjsip_configuration.c Using the existing / DOCUMENTATION */ fragment. res/res_pjsip/pjsip_doc.xml A fully-formed XML file. The "configInfo", "manager", "managerEvent", etc. elements that would be in the "c" file DOCUMENTATION fragment should be wrapped in proper XML. Example for "somemodule.xml": <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE docs SYSTEM "appdocsxml.dtd"> <docs> <configInfo> ... </configInfo> </docs> It's the "appdocsxml.dtd" that tells make_xml_documentation that this is a documentation XML file and not some other XML file. It also allows many XML-capable editors to do formatting and validation. Other than the ".xml" suffix, the name of the file is not significant. As a start... This change also moves the documentation that was in res_pjsip.c to 2 new XML files in res/res_pjsip: pjsip_config.xml and pjsip_manager.xml. This cut the number of lines in res_pjsip.c in half. :) Change-Id: I486c16c0b5a44d7a8870008e10c941fb19b71ade	4 years ago

19 Commits (ea8ead4e13c1ebe5f816f8cb3126a10bfb0165f8)