1103 Commits (e9f33451deae9543172bd99b958643c8a170bbf2)

Author	SHA1	Message	Date
smtcbn	4d3d5964fd	app_queue: fix double increment of member->calls with shared_lastcall ... Under high concurrency, update_queue() may be invoked multiple times for the same call, causing member->calls and queue-level counters to be incremented more than once. The existing starttime check is not atomic and allows concurrent execution paths to pass. Treat member->starttime as a single-use token and consume it via CAS to ensure the call is counted exactly once. This also prevents incorrect call distribution when using strategies such as fewestcalls. Observed as a regression after upgrading to 20.17. Resolves: #1736	3 months ago
phoneben	47c56d2b48	app_queue: Fix raise_respect_min lost in copy_rules() breaking rN queue rules ... app_queue: Fix raise_respect_min not copied in copy_rules() causing rN rules to be ignored. `copy_rules()` never copied `raise_respect_min` into the per-call rule list, so the flag was always 0 when a timed penaltychange rule fired, making `rN` behave like plain `N` and raising members below `min_penalty` that should have been excluded. Also fixes `update_qe_rule()` not propagating the flag from `qe->pr` to `qe`, and dropping the `r` prefix when saving back to `QUEUE_RAISE_PENALTY`. Resolves: #1901	4 months ago
serfreeman1337	287a902677	app_queue: Add 'prio' setting to the 'force_longest_waiting_caller' option ... This adds a 'prio' setting to ensure that call priority is respected across multiple queues. Using 'yes' could cause high-priority callers to be skipped if a caller in another queue had a longer wait time, regardless of priority. Resolves: #1637 UserNote: The 'force_longest_waiting_caller' option now supports a 'prio' setting. When set to 'prio', calls are offered by priority first, then by wait time.	7 months ago
phoneben	79a9177c5b	app_queue: Queue Timing Parity with Dial() and Accurate Wait Metrics ... app_queue: Set Dial-compatible timing variables Extends Queue() to set Dial-compatible timing variables (ANSWEREDTIME, DIALEDTIME) and introduces a precise QUEUEWAIT metric calculated at agent connect time, with proper initialization to prevent stale or misleading values.	7 months ago
phoneben	aac1f4f11b	app_queue: Fix rN raise_penalty ignoring min_penalty in calc_metric ... QUEUE_RAISE_PENALTY=rN was not respected during member selection. calc_metric() raised penalties below QUEUE_MIN_PENALTY, allowing excluded members to be selected. This change makes calc_metric() honor raise_respect_min, keeping behavior consistent with queue empty checks and expected rN semantics UserNote: Fixes an issue where QUEUE_RAISE_PENALTY=rN could raise a member’s penalty below QUEUE_MIN_PENALTY during member selection. This could allow members intended to be excluded to be selected. The queue now consistently respects the minimum penalty when raising penalties, aligning member selection behavior with queue empty checks and documented rN semantics.	7 months ago
serfreeman1337	a0c85b227c	app_queue: Only compare calls at 1st position across queues when forcing longest waiting caller. ... This prevents a situation where a call joining at 1st position to a queue with calls leads to a state where no callers are considered the longest waiting, causing queues to stop offering calls. Resolves: #1691	7 months ago
Sean Bright	8998e0a152	app_queue.c: Update docs to correct QueueMemberPause event name.	9 months ago
Kristian F. Høgh	9a2dca7c8c	app_queue.c: Only announce to head caller if announce_to_first_user ... Only make announcements to head caller if announce_to_first_user is true Fixes: #1568 UserNote: When announce_to_first_user is false, no announcements are played to the head caller	10 months ago
Ben Ford	e9353fb091	app_queue.c: Fix error in Queue parameter documentation. ... When macro was removed in Asterisk 21, the parameter documentation in code was not updated to reflect the correct numerization for gosub. It still stated that it was the seventh parameter, but got shifted to the sixth due to the removal of macro. This has been updated to correctly reflect the parameter order, and a note has been added to the XML that states this was done after the initial commit. Fixes: #1534 UpgradeNote: As part of Asterisk 21, macros were removed from Asterisk. This resulted in argument order changing for the Queue dialplan application since the macro argument was removed. Upgrade notice was missed when this was done, so this upgrade note has been added to provide a record of such and a notice to users who may have not upgraded yet.	11 months ago
Joshua C. Colp	b0db11cb27	app_queue: Allow stasis message filtering to work. ... The app_queue module subscribes on a per-dialed agent basis to both the bridge all and channel all topics to keep apprised of things going on involving them. This subscription has associated state that must be cleaned up when the subscription ends. This was done by setting a default router callback that only had logic to handle the case where the subscription ends. By using the default router callback all filtering for the subscription was disabled, causing unrelated messages to get published and handled by it. This change makes it so that an explicit route is added for the message type used for the message indicating the subscription has ended and removes the default router callback. This allows message filtering to occur on publishing reducing the messages to app_queue to only those it is interested in.	11 months ago
Bastian Triller	573c8faa09	Fix some doxygen, typos and whitespace	12 months ago
phoneben	d88a5f57ca	app_queue: Add NULL pointer checks in app_queue ... Add NULL check for word_list before calling word_in_list() Add NULL checks for channel snapshots from ast_multi_channel_blob_get_channel() Resolves: #1425	12 months ago
Igor Goncharovsky	c982efaceb	app_queue.c: Add new global 'log_unpause_on_reason_change' ... In many asterisk-based systems, the pause reason is used to separate pauses by type,and logically, changing the reason defines two intervals that should be accounted for separately. The introduction of a new option allows me to separate the intervals of operator inactivity in the log by the event of unpausing. UserNote: Add new global option 'log_unpause_on_reason_change' that is default disabled. When enabled cause addition of UNPAUSE event on every re-PAUSE with reason changed.	1 year ago
Stuart Henderson	cfcb245634	app_queue: fix comparison for announce-position-only-up ... Numerically comparing that the current queue position is less than last_pos_said can only be done after at least one announcement has been made, otherwise last_pos_said is at the default (0). Fixes: #1386	1 year ago
Naveen Albert	aca74d100c	app_queue: Remove redundant/deprecated function. ... QUEUE_MEMBER_COUNT has been deprecated since at least 1.6, for fully duplicating functionality available in the QUEUE_MEMBER function; remove it now. Resolves: #1341 UpgradeNote: The deprecated QUEUE_MEMBER_COUNT function has been removed; use QUEUE_MEMBER(<queue>,logged) instead.	1 year ago
phoneben	c753fe44d1	app_queue: queue rules – Add support for QUEUE_RAISE_PENALTY=rN to raise penalties only for members within min/max range ... This update adds support for a new QUEUE_RAISE_PENALTY format: rN When QUEUE_RAISE_PENALTY is set to rN (e.g., r4), only members whose current penalty is greater than or equal to the defined min_penalty and less than or equal to max_penalty will have their penalty raised to N. Members with penalties outside the min/max range remain unchanged. Example behaviors: QUEUE_RAISE_PENALTY=4 → Raise all members with penalty < 4 (existing behavior) QUEUE_RAISE_PENALTY=r4 → Raise only members with penalty in [min_penalty, max_penalty] to 4 Implementation details: Adds parsing logic to detect the r prefix and sets the raise_respect_min flag Modifies the raise logic to skip members outside the defined penalty range when the flag is active UserNote: This change introduces QUEUE_RAISE_PENALTY=rN, allowing selective penalty raises only for members whose current penalty is within the [min_penalty, max_penalty] range. Members with lower or higher penalties are unaffected. This behavior is backward-compatible with existing queue rule configurations.	1 year ago
Luz Paz	9ca3233aea	docs: Fix typos in apps/ ... Found via codespell	1 year ago
phoneben	ac07cbe2c3	Add log-caller-id-name option to log Caller ID Name in queue log ... Add log-caller-id-name option to log Caller ID Name in queue log This patch introduces a new global configuration option, log-caller-id-name, to queues.conf to control whether the Caller ID name is logged when a call enters a queue. When log-caller-id-name=yes, the Caller ID name is logged as parameter 4 in the queue log, provided it’s allowed by the existing log_restricted_caller_id rules. If log-caller-id-name=no (the default), the Caller ID name is omitted from the logs. Fixes: #1091 UserNote: This patch adds a global configuration option, log-caller-id-name, to queues.conf to control whether the Caller ID name is logged as parameter 4 when a call enters a queue. When log-caller-id-name=yes, the Caller ID name is included in the queue log, Any '|' characters in the caller ID name will be replaced with '_'. (provided it’s allowed by the existing log_restricted_caller_id rules). When log-caller-id-name=no (the default), the Caller ID name is omitted.	1 year ago
Sean Bright	82bef2ed90	docs: Indent <since> tags. ... Also updates the 'since' of applications/functions that existed before XML documentation was introduced (1.6.2.0).	2 years ago
George Joseph	198b01c536	docs: Add version information to application and function XML elements ... * Do a git blame on the embedded XML application or function element. * From the commit hash, grab the summary line. * Do a git log --grep <summary> to find the cherry-pick commits in all branches that match. * Do a git patch-id to ensure the commits are all related and didn't get a false match on the summary. * Do a git tag --contains <commit> to find the tags that contain each commit. * Weed out all tags not ..0. * Sort and discard any .0.0 and following tags where the commit appeared in an earlier branch. * The result is a single tag for each branch where the application or function was defined. The applications and functions defined in the following files were done by hand because the XML was extracted from the C source file relatively recently. * channels/pjsip/dialplan_functions_doc.xml * main/logger_doc.xml * main/manager_doc.xml * res/res_geolocation/geoloc_doc.xml * res/res_stir_shaken/stir_shaken_doc.xml	2 years ago
George Joseph	77d5550d14	docs: Add version information to manager event instance XML elements ... * Do a git blame on the embedded XML managerEvent elements. * From the commit hash, grab the summary line. * Do a git log --grep <summary> to find the cherry-pick commits in all branches that match. * Do a git patch-id to ensure the commits are all related and didn't get a false match on the summary. * Do a git tag --contains <commit> to find the tags that contain each commit. * Weed out all tags not ..0. * Sort and discard any .0.0 and following tags where the commit appeared in an earlier branch. * The result is a single tag for each branch where the application or function was defined. The events defined in res/res_pjsip/pjsip_manager.xml were done by hand because the XML was extracted from the C source file relatively recently. Two bugs were fixed along the way... * The get_documentation awk script was exiting after it processed the first DOCUMENTATION block it found in a file. We have at least 1 source file with multiple DOCUMENTATION blocks so only the first one in them was being processed. The awk script was changed to continue searching rather than exiting after the first block. * Fixing the awk script revealed an issue in logger.c where the third DOCUMENTATION block contained a XML fragment that consisted only of a managerEventInstance element that wasn't wrapped in a managerEvent element. Since logger_doc.xml already existed, the remaining fragments in logger.c were moved to it and properly organized.	2 years ago
Sean Bright	468601fd13	manager: Add `<since>` tags for all AMI actions.	2 years ago
Sperl Viktor	0bf31781c3	app_queue: indicate the paused state of a dynamically added member in queue_log. ... Fixes: #1021	2 years ago
Sperl Viktor	d5c0486175	app_queue: allow dynamically adding a queue member in paused state. ... Fixes: #1007 UserNote: use the p option of AddQueueMember() for paused member state. Optionally, use the r(reason) option to specify a custom reason for the pause.	2 years ago
Alexei Gradinari	07aa0ffe6a	app_queue: Add option to not log Restricted Caller ID to queue_log ... Add a queue option log-restricted-caller-id to strip the Caller ID when storing the ENTERQUEUE event in the queue log if the Caller ID is restricted. Resolves: #765 UpgradeNote: Add a new column to the queues table: queue_log_option_log_restricted ENUM('0','1','off','on','false','true','no','yes') to control whether the Restricted Caller ID will be stored in the queue log. UserNote: Add a Queue option log-restricted-caller-id to control whether the Restricted Caller ID will be stored in the queue log. If log-restricted-caller-id=no then the Caller ID will be stripped if the Caller ID is restricted.	2 years ago
Sean Bright	a358458912	app_queue.c: Properly handle invalid strategies from realtime. ... The existing code sets the queue strategy to `ringall` but it is then immediately overwritten with an invalid one. Fixes #707	2 years ago
Shaaah	037792b57b	app_queue.c : fix "queue add member" usage string ... Fixing bracket placement in the "queue add member" cli usage string.	3 years ago
Sean Bright	ca931c9436	app.c: Allow ampersands in playback lists to be escaped. ... Any function or application that accepts a `&`-separated list of filenames can now include a literal `&` in a filename by wrapping the entire filename in single quotes, e.g.: ``` exten = _X.,n,Playback('https://example.com/sound.cgi?a=b&c=d'&hello-world) ``` Fixes #172 UpgradeNote: Ampersands in URLs passed to the `Playback()`, `Background()`, `SpeechBackground()`, `Read()`, `Authenticate()`, or `Queue()` applications as filename arguments can now be escaped by single quoting the filename. Additionally, this is also possible when using the `CONFBRIDGE` dialplan function, or configuring various features in `confbridge.conf` and `queues.conf`.	3 years ago
Sean Bright	6c6137028b	app_queue.c: Emit unpause reason with PauseQueueMember event. ... Fixes #395	3 years ago
Jaco Kroon	4db98a38f1	app_queue: periodic announcement configurable start time. ... This newly introduced periodic-announce-startdelay makes it possible to configure the initial start delay of the first periodic announcement after which periodic-announce-frequency takes over. UserNote: Introduce a new queue configuration option called 'periodic-announce-startdelay' which will vary the normal (historic) behavior of starting the periodic announcement cycle at periodic-announce-frequency seconds after entering the queue to start the periodic announcement cycle at period-announce-startdelay seconds after joining the queue. The default behavior if this config option is not set remains unchanged. Signed-off-by: Jaco Kroon <jaco@uls.co.za>	3 years ago
Joshua C. Colp	6b6880072b	app_queue: Add support for applying caller priority change immediately. ... The app_queue module provides both an AMI action and a CLI command to change the priority of a caller in a queue. Up to now this change of priority has only been reflected to new callers into the queue. This change adds an "immediate" option to both the AMI action and CLI command which immediately applies the priority change respective to the other callers already in the queue. This can allow, for example, a caller to be placed at the head of the queue immediately if their priority is sufficient. Resolves: #202 UserNote: The 'queue priority caller' CLI command and 'QueueChangePriorityCaller' AMI action now have an 'immediate' argument which allows the caller priority change to be reflected immediately, causing the position of a caller to move within the queue depending on the priorities of the other callers.	3 years ago
Nathan Bruning	292834d1ba	app_queue: Add force_longest_waiting_caller option. ... This adds an option 'force_longest_waiting_caller' which changes the global behavior of the queue engine to prevent queue callers from 'jumping ahead' when an agent is in multiple queues. Resolves: #108 Also closes old asterisk issues: - ASTERISK-17732 - ASTERISK-17570 Change-Id: I0f84e27903fefbe2018d0afa2d67b23aa0b321ce	3 years ago
Niklas Larsson	c1f21b6f66	app_queue: Preserve reason for realtime queues ... When Asterisk is restarted it does not preserve paused reason for members of realtime queues. This was fixed for non-realtime queues in ASTERISK_25732 Resolves: #66 UpgradeNote: Add a new column to the queue_member table: reason_paused VARCHAR(80) so the reason can be preserved. UserNote: Make paused reason in realtime queues persist an Asterisk restart. This was fixed for non-realtime queues in ASTERISK_25732.	3 years ago
Joshua Colp	4ec4543332	Revert "app_queue: periodic announcement configurable start time." ... This reverts commit 71e317f68f. Reason for revert: Causes segmentation fault. Change-Id: I3beeda83249bffec2a8f246aa50a6b2f1b59ef59	3 years ago
Naveen Albert	fa41458298	app_queue: Fix minor xmldoc duplication and vagueness. ... The F option in the xmldocs for the Queue application was erroneously duplicated, causing it to display twice on the wiki. The two sections are now merged into one. Additionally, the description for the d option was quite vague. Some more details are added to provide context as to what this actually does. ASTERISK-30486 #close Change-Id: I6706cea708b5cc781f59f8652c2cb377e55aed7e	3 years ago
Jaco Kroon	71e317f68f	app_queue: periodic announcement configurable start time. ... This newly introduced periodic-announce-startdelay makes it possible to configure the initial start delay of the first periodic announcement after which periodic-announce-frequency takes over. ASTERISK-30437 #close Change-Id: Ia79984b6377ef78f167ad9ea2ac084bec29955d0 Signed-off-by: Jaco Kroon <jaco@uls.co.za>	4 years ago
Sean Bright	f9a27f028f	app_queue: Minor docs and logging fixes for UnpauseQueueMember. ... ASTERISK-30417 #close Change-Id: I7534e7a925bf92a7b5a5347f5f54225768c162fe	4 years ago
Sean Bright	632da7c11a	app_queue: Reset all queue defaults before reload. ... Several queue fields were not being set to their default value during a reload. Additionally added some sample configuration options that were missing from queues.conf.sample. Change-Id: I3a88c7877af91752b1b46a0c087384f7eb9c47e4	4 years ago
Mike Bradeen	6b03d60c7d	res_monitor: Remove deprecated module. ... ASTERISK-30303 Change-Id: I0462caefb4f9544e2e2baa23c498858310b52d50	4 years ago
Mike Bradeen	e8f548c155	app_macro: Remove deprecated module. ... For most modules that interacted with app_macro, this change is limited to no longer looking for the current context from the macrocontext when set. Additionally, the following modules are impacted: app_dial - no longer supports M^ connected/redirecting macro app_minivm - samples written using macro will no longer work. The sample needs a re-write app_queue - can no longer a macro on the called party's channel. Use gosub which is currently supported ccss - no callback macro, gosub only app_voicemail - no macro support channel - remove macrocontext and priority, no connected line or redirection macro options options - stdexten is deprecated to gosub as the default and only pbx - removed macrolock pbx_dundi - no longer look for macro snmp - removed macro context, exten, and priority ASTERISK-30304 Change-Id: I830daab293117179b8d61bd4df0d971a1b3d07f6	4 years ago
Naveen Albert	ede4e2099f	app_queue: Add music on hold option to Queue. ... Adds the m option to the Queue application, which allows a music on hold class to be specified at runtime which will override the class configured in queues.conf. This option functions like the m option to Dial. ASTERISK-29876 #close Change-Id: Ie25a48569cf8755c305c9438b1ed292c3adcf8d7	4 years ago
Kfir Itzhak	2be01ba40b	app_queue: Add QueueWithdrawCaller AMI action ... This adds a new AMI action called QueueWithdrawCaller. This AMI action makes it possible to withdraw a caller from a queue, in a safe and a generic manner. This can be useful for retrieving a specific call and dispatching it to a specific extension. It works by signaling the caller to exit the queue application whenever it can. Therefore, it is not guaranteed that the call will leave the queue. ASTERISK-29909 #close Change-Id: Ic15aa238e23b2884abdcaadff2fda7679e29b7ec	5 years ago
Alexei Gradinari	b41440a179	app_queue: load queues and members from Realtime when needed ... There are a lot of Queue AMI actions and Queue applications which do not load queue and queue members from Realtime. AMI actions QueuePause - if queue not in memory - response "Interface not found". QueueStatus/QueueSummary - if queue not in memory - empty response. Applications: PauseQueueMember - if queue not in memory Attempt to pause interface %s, not found UnpauseQueueMember - if queue not in memory Attempt to unpause interface xxxxx, not found This patch adds a new function load_realtime_queues which loads queue and queue members for desired queue or all queues and all members if param 'queuename' is NULL or empty. Calls the function load_realtime_queues when needed. Also this patch fixes leak of ast_config in function set_member_value. Also this patch fixes incorrect LOG_WARNING when pausing/unpausing already paused/unpaused member. The function ast_update_realtime returns 0 when no record modified. So 0 is not an error to warn about. ASTERISK-29873 #close ASTERISK-18416 #close ASTERISK-27597 #close Change-Id: I554ee0eebde93bd8f49df7f84b74acb21edcb99c	5 years ago
Mark Petersen	93d090147f	app_queue.c: Queue don't play "thank-you" when here is no hold time announcements ... if holdtime is (0 min, 0 sec) there is no hold time announcements we should then also not playing queue-thankyou ASTERISK-29831 Change-Id: Ic7e51dcde526b23f1cd8d24e1d1e2d81e10f9d2c	5 years ago
Mark Petersen	dc7bcd68e4	app_queue.c: Support for Nordic syntax in announcements ... adding support for playing the correct en/et for nordic languages by adding 'n' for neuter gender in the relevant ast_say_number ASTERISK-29827 Change-Id: I03ebc827d2f0dc95132ab2f42799893c70edc5b1	5 years ago
Naveen Albert	70bc0ff9d0	documentation: Add missing AMI documentation ... Adds missing documentation for some channel, bridge, and queue events. ASTERISK-24427 ASTERISK-29515 Change-Id: I92b06b88c8cadc0155f95ebe3e870b3e795a8c64	5 years ago
Steve Davies	a2ea233a6d	app_queue: Fix hint updates, allow dup. hints ... A previous patch for ASTERISK_29578 caused a 'leak' of extension state information across queues, causing the state of the first member of unrelated queues to be updated in addition to the correct member. Which queues and members depended on the order of queues in the iterator. Additionally, it is possible to use the same 'hint:' on multiple queue members, so the update cannot break out of the update loop early when a match is found. ASTERISK-29806 #close Change-Id: If2c1d1cc2a752afd9286d79710fc818596e7a7ad	5 years ago
Mark Petersen	92cb1c0a59	app_queue.c: added DIALEDPEERNUMBER on outgoing channel ... added that we set DIALEDPEERNUMBER on the outgoing channels so it is avalible in b(content^extension^line) this add the same behaviour as Dial ASTERISK-29795 Change-Id: Icbc589ea2066f0c401a892bf478f6b2fd44e62f6	5 years ago
Alexander Traud	cc025026b7	progdocs: Fix for Doxygen, the hidden parts. ... ASTERISK-29779 Change-Id: If338163488498f65fa7248b60e80299c0a928e4b	5 years ago
Naveen Albert	24a04054ad	documentation: Standardize examples ... Most examples in the XML documentation use the example tag to demonstrate examples, which gets parsed specially in the Wiki to make it easier to follow for users. This fixes a few modules to use the example tag instead of vanilla para tags to bring them in line with the standard syntax. ASTERISK-29777 #close Change-Id: I9acb6cc5faf1d220e73c6dd28592371d768d279b	5 years ago