https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r67716 | russell | 2007-06-06 11:55:59 -0500 (Wed, 06 Jun 2007) | 13 lines
Merged revisions 67715 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r67715 | russell | 2007-06-06 11:40:51 -0500 (Wed, 06 Jun 2007) | 5 lines
We have some bug reports showing crashes due to a double free of a channel.
Add a sanity check to ast_channel_free() to make sure we don't go on trying
to free a channel that wasn't found in the channel list.
(issue #8850, and others...)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@67717 65c4cc65-6c06-0410-ace0-fbb531ad65f3
old value instead of the old debug value, leading to an erroneous status message
after setting. This was purely a cosmetic issue and had no other underlying problems.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@67557 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r67308 | russell | 2007-06-05 10:51:53 -0500 (Tue, 05 Jun 2007) | 5 lines
When shutting down "gracefully", go through and run the unload() callbacks for
all of the modules. "stop now" is considered a non-graceful shutdown and will
not go through this process.
(issue #9804, reported by chrisost, patch by me)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@67310 65c4cc65-6c06-0410-ace0-fbb531ad65f3
places that cared about device states were app_queue and the hint code in pbx.c.
The changes include converting it to use the Asterisk event system, as well as
other efficiency improvements.
* app_queue: This module used to register a callback into devicestate.c to
monitor device state changes. Now, it is just a subscriber to Asterisk
events with the type, device state.
* pbx.c hints: Previously, the device state processing thread in devicestate.c
would call ast_hint_state_changed() each time the state of a device changed.
Then, that code would go looking for all the hints that monitor that device,
and call their callbacks. All of this blocked the device state processing
thread. Now, the hint code is a subscriber of Asterisk events with the
type, device state. Furthermore, when this code receives a device state
change event, it queues it up to be processed by another thread so that it
doesn't block one of the event processing threads.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@66958 65c4cc65-6c06-0410-ace0-fbb531ad65f3
places in the code where the same block of code for creating detached threads
was replicated. (patch from bbryant)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@65968 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r65842 | russell | 2007-05-24 09:49:05 -0500 (Thu, 24 May 2007) | 5 lines
Fix the calculation of the RTT for RTCP. The previous code would result in
oscillating and incorrect data. Additionally, the RTT would sometimes report
negative values due to incorrect calculations.
(issue #9601, patch from davetroy)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@65843 65c4cc65-6c06-0410-ace0-fbb531ad65f3
class in musiconhold.conf, a caller on hold may press this digit to switch
to listening to that music class.
This involved adding a new callback for generators, which allow generators
to get notified of DTMF from the channel they are running on. Then, a callback
was implemented for the music on hold generators.
(patch from bbryant)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@65505 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r65201 | murf | 2007-05-18 16:26:51 -0600 (Fri, 18 May 2007) | 1 line
Ugh. The svnmerge didn't catch the shift from cdr.c to main/cdr.c, and neither did I. This is the remainder of the 9717 patch, the fix for the run-away FAIL status for a call
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@65203 65c4cc65-6c06-0410-ace0-fbb531ad65f3
allow you to initiate an ENUM query using ENUMQUERY, and then access the
details of all of the results using ENUMRESULT. Previously, if you wanted
to access multiple results, Asterisk would have to do a new DNS lookup every
time. (patch by bbryant)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@64480 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This caused a problem with the buildinfo.o file not being able to find asterisk/build.h
This was affecting DESTDIR, but I *think* that if asterisk had never been installed before, it would've failed also.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@64355 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r63982 | qwell | 2007-05-11 15:16:17 -0500 (Fri, 11 May 2007) | 7 lines
Hide manager password from "manager show user foo".
I realize that there are other ways to get this,
but we really don't need to just show it in plain text so easily.
Issue 9273, patch by junky
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@63983 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When enabled, it will set the systemname to be the hostname of the system
Issue 9713, patch by Juggie - slightly modified by me, to "failover" to localhost
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@63967 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r63886 | russell | 2007-05-11 11:05:43 -0500 (Fri, 11 May 2007) | 6 lines
When MD5 authentication is not possible because there is no challenge present,
either because the Challenge action was never issued, or some other reason,
give a proper error message and return an error instead of claiming that the
user wasn't found.
(reported by jsmith on IRC)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@63902 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r63612 | russell | 2007-05-09 11:55:27 -0500 (Wed, 09 May 2007) | 5 lines
Modify ast_senddigit_begin() to use the same assumptions used elsewhere in the
code in that if a channel does not have a send_digit_begin() callback, it only
cares about DTMF END events. (pointed out by Michael Neuhauser on the
asterisk-dev list)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@63697 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r63608 | russell | 2007-05-09 11:43:50 -0500 (Wed, 09 May 2007) | 5 lines
Only call ast_senddigit_begin() in ast_senddigit() if the channel has a
send_digit_begin() callback. Checking the END_DTMF_ONLY flag was the
wrong thing to do, because that flag indicates that a *bridged* channel
only wants DTMF END events coming from this channel.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@63609 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Add missing option to options.h
- Add missing variables to asterisk.h
- Move manager version to manager.h include file
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@63030 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r62986 | kpfleming | 2007-05-03 11:38:56 -0500 (Thu, 03 May 2007) | 2 lines
improve loader a bit, by avoiding trying to initialize embedded modules twice and avoiding trying to load modules from disk when they have been loaded already during the 'preload' pass (reported by blitzrage on IRC, patch by me)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@62988 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r62942 | russell | 2007-05-03 10:23:13 -0500 (Thu, 03 May 2007) | 17 lines
Fix YADB (Yet Another DTMF Bug) ((C) Russell Bryant, 2007, TM, Patent Pending).
This set of changes came from a debugging session I had with Dwayne Hubbard.
When he called into his home FXO, ran the Echo application, and pressed a
digit, the digit would be echoed back and would never end. This is fixed,
along with a couple other little improvements.
* When chan_zap is in the middle of playing a digit to a channel, it feeds
back null frames, not voice frames. So, I have modified ast_read to check
the timing on emulated DTMF when it receives null frames, in addition to
where it was doing this on voice frames.
* Make a tweak to setting the duration on emulated DTMF digits. If there was
no duration specified, it set it to be the minimum, instead of the default.
* Instead of timing the emulated digits off of the number of samples in audio
frames that pass through, just use time values. Now there is no code in this
section that assumes 8kHz audio.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@62943 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r62789 | russell | 2007-05-02 17:59:09 -0500 (Wed, 02 May 2007) | 20 lines
Merge changes from team/russell/inband_dtmf ...
Fix some issues related to generating inband DTMF. There are two changes here:
1) The list of DTMF tones in the senddigit_begin() function explicitly
specified 100ms of the tone followed by 100ms of silence. This really
broke things with the way that Asterisk now wants complete control
over when the digit begins and ends. So, regardless of what Asterisk
really wanted to do, this was going to play out the tone at the length it
wanted to. This caused various problems like DTMF translation to inband to
be extremely unreliable.
The list of tones has been changed so that the correct DTMF tone is played
indefinitely until Asterisk tells it to stop.
2) ast_write() had to be modified to let a DTMF_END frame get processed even
when a generator is present. This is how the tone will finally get stopped.
(issues #8944, #9250, #9348, maybe others. Thanks to mdu113 from #8944 for
the testing and feedback!)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@62791 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r62689 | murf | 2007-05-02 11:10:50 -0600 (Wed, 02 May 2007) | 1 line
a)In chan_zap, set the clid, src fields in channel_alloc call. b)in the channel_alloc func, set the cid_num and name fields from the arglist[blush]. c) don't update the channel app & app data fields if you are in the 'h' extension. d)the load_module func in cdr_radius needs to return DECLINE, SUCCESS.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@62690 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This set of changes introduces a new generic event API for use within Asterisk.
I am still working on a way for events to be shared between servers, but this
part is ready and can already be used inside of Asterisk.
This set of changes introduces the first use of the API, as well. I have
restructured the way that MWI (message waiting indication) is handled. It is
now event based instead of polling based. For example, if there are a bunch
of SIP phones subscribed to mailboxes, then chan_sip will not have to
constantly poll the mailboxes for changes. app_voicemail will generate events
when changes occur.
See UPGRADE.txt and CHANGES for some more information on the effects of these
changes from the user perspective. For developer information, see the text in
include/asterisk/event.h.
As always, additional feedback is welcome on the asterisk-dev mailing list.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@62292 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r62171 | russell | 2007-04-27 11:14:11 -0500 (Fri, 27 Apr 2007) | 6 lines
If no variables were passed into pbx_substitute_variables_helper_full(), then
don't even bother creating a temporary bogus channel, since that is only for
allowing certain functions to operate on the variables as if they were on a
channel. Most importantly, this fixes a crash.
(issue #9613, reported by callguy, fixed by me)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@62172 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r61781 | russell | 2007-04-24 14:00:06 -0500 (Tue, 24 Apr 2007) | 6 lines
Improve DTMF handling in ast_read() even more in response to a discussion on
the asterisk-dev mailing list. I changed the enforced minimum length of a
digit from 100ms to 80ms. Furthermore, I made it now enforce a gap of 45ms in
between digits. These values are not configurable in a configuration file
right now, but they can be easily changed near the top of main/channel.c.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@61782 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r61774 | russell | 2007-04-24 11:16:41 -0500 (Tue, 24 Apr 2007) | 5 lines
Add a few more state changes in handle_frame_ownerless() so that the SLA code
will get notified of these changes even when an owner channel is not provided.
This isn't from a specific bug report, it's just something I noticed while
poking around.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@61775 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r61765 | russell | 2007-04-23 13:17:00 -0500 (Mon, 23 Apr 2007) | 5 lines
Some dialplan functions, such as CUT(), expect to operate on variables on a
channel. So, this little hack lets them work in places where a channel doesn't
exist, such as within DUNDi configuration.
(issue #9465, reported and patched by Corydon76, testing by blitzrage)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@61766 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r61707 | qwell | 2007-04-20 16:35:27 -0500 (Fri, 20 Apr 2007) | 8 lines
Avoid invalid seqno cycling detection.
Per comment from Dave Troy:
This adds back in some simple typecasting I had in an earlier version
which I realize now may be breaking things.
Issue #9554.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@61708 65c4cc65-6c06-0410-ace0-fbb531ad65f3
I started this for use with SLA but ended up deciding not to use it. However,
there is no reason not to put this part in, anyway.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@61259 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r60850 | tilghman | 2007-04-08 22:01:12 -0500 (Sun, 08 Apr 2007) | 10 lines
Merged revisions 60849 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r60849 | tilghman | 2007-04-08 21:49:06 -0500 (Sun, 08 Apr 2007) | 2 lines
Don't check for error when lowering priority (according to the manpage, it should never happen anyway). It might could happen, though, if another thread messed with the priority, so safeguard against that (reported via -dev list).
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@60851 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r60603 | russell | 2007-04-06 15:58:43 -0500 (Fri, 06 Apr 2007) | 13 lines
To be able to achieve the things that we would like to achieve with the
Asterisk GUI project, we need a fully functional HTTP interface with access
to the Asterisk manager interface. One of the things that was intended to be
a part of this system, but was never actually implemented, was the ability for
the GUI to be able to upload files to Asterisk. So, this commit adds this in
the most minimally invasive way that we could come up with.
A lot of work on minimime was done by Steve Murphy. He fixed a lot of bugs in
the parser, and updated it to be thread-safe. The ability to check
permissions of active manager sessions was added by Dwayne Hubbard. Then,
hacking this all together and do doing the modifications necessary to the HTTP
interface was done by me.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@60604 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r60137 | russell | 2007-04-04 12:40:10 -0500 (Wed, 04 Apr 2007) | 14 lines
Merged revisions 60134 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r60134 | russell | 2007-04-04 12:38:47 -0500 (Wed, 04 Apr 2007) | 6 lines
It is valid to redirect channels via the manager interface that are not in the
UP state. Instead of checking for that to prevent to ensure a dead channel
doesn't get redirected, just use the ast_check_hangup() API call.
(issue #9457, reported by Callmewind, patch by me)
(related to issue #8977)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@60141 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r59887 | russell | 2007-04-03 13:01:49 -0500 (Tue, 03 Apr 2007) | 13 lines
Merged revisions 59886 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r59886 | russell | 2007-04-03 12:58:19 -0500 (Tue, 03 Apr 2007) | 5 lines
When doing a built-in blind or attended transfer, restore the ability to use '#'
to terminate the number and immediately do the transfer instead of having to
dial the number and just wait for the feature digit timeout.
(issue #8366, xueliangliang)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@59888 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r59654 | russell | 2007-04-02 10:39:07 -0500 (Mon, 02 Apr 2007) | 14 lines
Merged revisions 59608 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r59608 | russell | 2007-04-01 17:35:25 -0500 (Sun, 01 Apr 2007) | 6 lines
Add the SO_REUSEADDR flag to sockets handled by netsock. This is needed by
the patch that went in for issue 7874. chan_iax2 needs to be able to create
socket that is lisetning on INADDR_ANY, but also be able to bind sockets to
specific addresses. (Thanks to Stevenson on the asterisk-dev mailing list
for explaining why this flag was needed.)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@59655 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r59358 | russell | 2007-03-29 12:17:41 -0500 (Thu, 29 Mar 2007) | 13 lines
Merged revisions 59357 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r59357 | russell | 2007-03-29 12:14:33 -0500 (Thu, 29 Mar 2007) | 5 lines
If an error occurs when reading from an RTP socket, and the error code does not
indicate that we should try again, then return NULL instead of a "null frame".
This will prevent Asterisk from trying over and over again, and eventually
causing the system to crash. (issue #8285, john)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@59359 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r59207 | russell | 2007-03-26 12:45:55 -0500 (Mon, 26 Mar 2007) | 7 lines
The AUDIORTPQOS and VIDEORTPQOS variables are not fully functional in some
because they get set in sip_hangup. So, there are common situations where
the variables will not be available in the dialplan at all. So, this patch
provides an alternate method for getting to this information by introducing
AUDIORTPQOS and VIDEORTPQOS dialplan functions.
(issue #9370, patch by Corydon76, with some testing by blitzrage)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@59208 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r58931 | russell | 2007-03-15 17:25:12 -0500 (Thu, 15 Mar 2007) | 13 lines
Merge changes from svn/asterisk/team/russell/LaTeX_docs.
* Convert most of the doc directory into a single LaTeX formatted document
so that we can generate a PDF, HTML, or other formats from this
information.
* Add a CLI command to dump the application documentation into LaTeX format
which will only be include if the configure script is run with
--enable-dev-mode.
* The PDF turned out to be close to 1 MB, so it is not included. However, you
can simply run "make asterisk.pdf" to generate it yourself. We may include
it in release tarballs or have automatically generated ones on the web site,
but that has yet to be decided.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@58932 65c4cc65-6c06-0410-ace0-fbb531ad65f3
for Mark Spencers upcoming 30th birthday.
To enable, run `make menuselect` and select the option MARKO_BDAY under Compiler Flags.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@58742 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r56505 | russell | 2007-02-23 17:24:18 -0600 (Fri, 23 Feb 2007) | 16 lines
Merged revisions 56504 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r56504 | russell | 2007-02-23 17:20:55 -0600 (Fri, 23 Feb 2007) | 8 lines
Fix up a couple more signal handlers to not do bad things that could cause
various undesirable results. The other day, I made Asterisk deadlock by
hitting Control-C because of a bad signal handler. Now, signal handlers
just set a flag and write to an alert pipe for the flag to be handled. Then,
there is another thread that is monitoring for these flags. If being run in
console mode, it is just the main thread. If Asterisk is in the background,
a thread is created to do it.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@56506 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r56457 | file | 2007-02-23 16:53:41 -0500 (Fri, 23 Feb 2007) | 2 lines
Change log notice to debug. It is possible for a scheduled item to execute and be deleted at close to the same time and unavoidable. If this happens this message creeps up.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@56458 65c4cc65-6c06-0410-ace0-fbb531ad65f3
performance of the GUI. This encodes the configuration into the JSON format
in a manager header, "JSON: ". The encoded information can be directly used
as a javascript object, so no parsing is needed. For large configuration
files, this can greatly improve loading times in the GUI. Furthermore, the
encoding takes up a lot less space when being transmitted than the other
alternatives. (Inspired by discussion with Pari)
Here is an example of what you get:
http://localhost:8088/asterisk/rawman?action=getconfigjson&filename=users.conf
Response: Success
JSON: {"general":["hasvoicemail=yes"],"6000":["fullname=russell","secret=1234"]}
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@56323 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r56277 | russell | 2007-02-22 17:08:36 -0600 (Thu, 22 Feb 2007) | 18 lines
Merge changes from team/russell/sla_updates.
This batch of changes to the SLA code does a few different things.
* I made the SLA code event driven instead of having to act in a lot of busy
loops while dialing things to wait for state changes. This makes the code
more efficient and readable at the same time.
* I have implemented a couple of new features. The first is inbound trunk
ringing timeouts. This is an option that defines how long to let an incoming
call on a trunk to ring.
* I have also implemented ring timeouts for stations. They may be specified
for the entire station, meaning it is how long to let the station ring before
giving up. You can also specify a ring timeout for a specific trunk on a
station. So, you can say that you only want a specific station to ring 5
seconds if it is line1 ringing, but otherwise, there is no timeout.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@56278 65c4cc65-6c06-0410-ace0-fbb531ad65f3
convert various #if expressions to #ifdef for macros that may not be defined (and where the value is not important)
Note: two of these changes are in bison generated files which is going to be inconvenient when they are regenerated
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@55329 65c4cc65-6c06-0410-ace0-fbb531ad65f3
T.140/RFC 2793 is a live communication channel, originally
created for IP based text phones for hearing impaired.
Feels very much like the old Unix talk application.
This code is developed and disclaimed by John Martin of Aupix, UK.
Tested for interoperability by myself and Omnitor in Sweden,
the company that wrote most of the specifications.
A big thank you to everyone involved in this.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@54838 65c4cc65-6c06-0410-ace0-fbb531ad65f3
pretty cool things.
First, you can get the device state of anything in the dialplan:
NoOp(SIP/mypeer has state ${DEVSTATE(SIP/mypeer)})
NoOp(The conference room 1234 has state ${DEVSTATE(MeetMe:1234)})
Most importantly, this allows you to create custom device states so you can
control phone lamps directly from the dialplan.
Set(DEVSTATE(Custom:mycustomlamp)=BUSY)
...
exten => mycustomlamp,hint,Custom:mycustomlamp
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@54261 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r54066 | russell | 2007-02-12 11:58:43 -0600 (Mon, 12 Feb 2007) | 4 lines
- Add the ability to register a callback to monitor state changes in an
asynchronous dial operation.
- Rename the various references to "status" to "state" in the dial API
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@54067 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r53810 | russell | 2007-02-09 18:35:09 -0600 (Fri, 09 Feb 2007) | 24 lines
Merge team/russell/sla_rewrite
This is a completely new implementation of the SLA functionality introduced in
Asterisk 1.4. It is now functional and ready for testing. However, I will be
adding some additional features over the next week, as well.
For information on how to set this up, see configs/sla.conf.sample
and doc/sla.txt.
In addition to the changes in app_meetme.c for the SLA implementation itself,
this merge brings in various other changes:
chan_sip:
- Add the ability to indicate HOLD state in NOTIFY messages.
- Queue HOLD and UNHOLD control frames even if the channel is not bridged to
another channel.
linkedlists.h:
- Add support for rwlock based linked lists.
dial.c:
- Add the ability to run ast_dial_start() without a reference channel to
inherit information from.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@53817 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r53497 | russell | 2007-02-07 17:52:45 -0600 (Wed, 07 Feb 2007) | 6 lines
When building libdb1.a, put the additional flags needed at the beginning of
ASTCFLAGS, instead of at the end. This way, we ensure that we find the local
headers first before accidentally trying to use headers that exist in
locations specified in the ASTCFLAGS passed from the main Makefile.
(issue #8637, ovi)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@53498 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r53464 | russell | 2007-02-07 14:07:39 -0600 (Wed, 07 Feb 2007) | 4 lines
The clean target actually needs to run "distclean" on editline. This is
because we need to make sure that its configure script gets executed again,
because the CFLAGS we want to pass to editline may have changed.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@53465 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r53429 | russell | 2007-02-07 11:39:31 -0600 (Wed, 07 Feb 2007) | 7 lines
When parsing the NTP timestamp in a sender report message, you are supposed to
take the low 16 bits of the integer part, and the high 16 bits of the
fractional part. However, the code here was erroneously taking the low 16 bits
of the fractional part. It then shifted the result 16 bits down, so the result
was always zero. This fix makes it grab the appropriate high 16 bits, instead.
(issue #8991, pointed out by andre_abrantes)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@53431 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r53052 | file | 2007-01-31 18:24:20 -0600 (Wed, 31 Jan 2007) | 2 lines
When going on hold have the side that was put on hold reinvite back to Asterisk. When going off hold have the side that was taken off hold reinvited back to the other party.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@53053 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r52904 | russell | 2007-01-30 11:19:39 -0600 (Tue, 30 Jan 2007) | 17 lines
Merged revisions 52903 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r52903 | russell | 2007-01-30 11:12:04 -0600 (Tue, 30 Jan 2007) | 9 lines
The SIGHUP handler was implemented to allow admins to send SIGHUP to a running
Asterisk process to reload the configuration. However, doing the actual reload
in the signal handler itself is a very bad thing to do, because the reload
process includes calling non-reentrant functions such as malloc/calloc/etc.
If Asterisk is running in the background, then the reload will happen
immediately. However, if running in console mode, the reload doesn't work
until something is typed at the console. That sort of defeats the purpose,
but I don't see an easy way to get around it at this point.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@52905 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r52645 | russell | 2007-01-29 15:26:27 -0600 (Mon, 29 Jan 2007) | 6 lines
Fix a problem with packet-to-packet bridging and DTMF mode translation. P2P
bridging can only be used when the DTMF modes don't match if the core is
monitoring DTMF in both directions. Then, the core will handle the translation.
Otherwise, this bridging method can not be used.
(issue #8936)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@52646 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- changing the actionlock to a rwlock
- not locking the session before doing the action callback
The crash issue in 8711 should not be an issue here.
Merged revisions 52611 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r52611 | russell | 2007-01-29 14:39:20 -0600 (Mon, 29 Jan 2007) | 10 lines
The session lock can not be held while calling action callbacks. If so, then
when the WaitEvent callback gets called, then no event can happen because the
session can't be locked by another thread. Also, the session needs to be
locked in the HTTP callback when it reads out the output string. This fixes
the deadlock reported in both 8711 and 8934.
Regarding issue 8711, there still may be an issue. If there is a second action
requested before the processing of the first action is finished, there could
still be some corruption of the output string buffer used to build the result.
(issue #8711, #8934)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@52613 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r52494 | jdixon | 2007-01-28 22:18:36 -0600 (Sun, 28 Jan 2007) | 4 lines
Fixed problem with jitterbuf, whereas it would not complain about, and
would allow itself to be overfilled (per the max_jitterbuf parameter). Now
it rejects any data over and above that size, and complains about it.
........
r52506 | russell | 2007-01-29 10:54:27 -0600 (Mon, 29 Jan 2007) | 5 lines
Clean up a few things in the last commit to the adaptive jitterbuffer code.
- Specifically indicate to the compiler that the "dropem" variable only
needs one but.
- Change formatting to conform to coding guidelines.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@52522 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r51848 | russell | 2007-01-23 18:59:58 -0600 (Tue, 23 Jan 2007) | 14 lines
Merged revisions 51843 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r51843 | russell | 2007-01-23 18:57:28 -0600 (Tue, 23 Jan 2007) | 6 lines
Fix an issue related to synchronization of recordings when using Monitor().
The bug is a miscalculation of the amount to seek the stream for writing to
disk when the number of samples coming in and out of a channel do not match up.
(issue #8298, #8887, report and patch by guillecabeza, patch files created and
testing done by whoiswes)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@51850 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r51781 | russell | 2007-01-23 16:04:01 -0600 (Tue, 23 Jan 2007) | 6 lines
Fix some bugs in process_message(). The manager session lock needs to be held
when sending some sort of response, or calling one of the manager action
callbacks. This resolves an issue where people using the GUI would get random
crashes when they start clicking around a lot.
(issue #8711, reported and debugged by zandbelt)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@51787 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r51750 | russell | 2007-01-23 15:33:15 -0600 (Tue, 23 Jan 2007) | 4 lines
When traversing the list of manager actions, the iterator needs to be
initialized to the list head *after* locking the list. Also, lock the actions
list in one place it is being accessed where it was not being done.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@51751 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r51683 | murf | 2007-01-23 11:58:27 -0700 (Tue, 23 Jan 2007) | 1 line
via 8748 (callerid.c loses name when returning PRIVATE_NUMBER flag), the user suggested this mod, saying it would allow 'WITHHELD' to appear in the name field, which would be useful
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@51684 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r51311 | russell | 2007-01-19 11:49:38 -0600 (Fri, 19 Jan 2007) | 23 lines
Merge the changes from the /team/group/vldtmf_fixup branch.
The main bug being addressed here is a problem introduced when two SIP
channels using SIP INFO dtmf have their media directly bridged. So, when a
DTMF END frame comes into Asterisk from an incoming INFO message, Asterisk
would try to emulate a digit of some length by first sending a DTMF BEGIN
frame and sending a DTMF END later timed off of incoming audio. However,
since there was no audio coming in, the DTMF_END was never generated. This
caused DTMF based features to no longer work.
To fix this, the core now knows when a channel doesn't care about DTMF BEGIN
frames (such as a SIP channel sending INFO dtmf). If this is the case, then
Asterisk will not emulate a digit of some length, and will instead just pass
through the single DTMF END event.
Channel drivers also now get passed the length of the digit to their digit_end
callback. This improves SIP INFO support even further by enabling us to put
the real digit duration in the INFO message instead of a hard coded 250ms.
Also, for an incoming INFO message, the duration is read from the frame and
passed into the core instead of just getting ignored.
(issue #8597, maybe others...)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@51314 65c4cc65-6c06-0410-ace0-fbb531ad65f3
has been found so that 'cat' is non-NULL. This way, users.conf is only checked
when necessary. (issue #8852, akohlsmith, committed patch a bit different)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@51296 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r51262 | russell | 2007-01-18 15:54:23 -0600 (Thu, 18 Jan 2007) | 5 lines
Ensure that the locations given to the Asterisk configure script for ncurses,
curses, termcap, or tinfo are further passed along to the editline configure
script. This fixes some cross-compilation environments.
(issue #8637, reported by ovi, patch by me)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@51263 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r51195 | tilghman | 2007-01-17 14:56:15 -0600 (Wed, 17 Jan 2007) | 12 lines
Merged revisions 51194 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r51194 | tilghman | 2007-01-17 14:52:21 -0600 (Wed, 17 Jan 2007) | 4 lines
When ast_strip_quoted was called with a zero-length string, it would treat a
NULL as if it were the quoting character (and would thus return the string
in memory immediately following the passed-in string).
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@51196 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r50867 | kpfleming | 2007-01-15 09:03:06 -0600 (Mon, 15 Jan 2007) | 2 lines
use the ACX_PTHREAD macro from the Autoconf macro archive for setting up compiler pthreads support... should improve portability to platforms with unusual pthreads requirements
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@50869 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r50466 | file | 2007-01-11 00:19:39 -0500 (Thu, 11 Jan 2007) | 2 lines
Add support to see whether NAT was detected (yay symmetric RTP) and also add a check in chan_sip so that if NAT has been detected and the reinvite behind nat option has been turned off, then just do partial bridge. (issue #8655 reported by mnicholson)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@50467 65c4cc65-6c06-0410-ace0-fbb531ad65f3
previously set are erroneously still set (Bug 6701). After discussion,
it was determined this should only be changed in trunk.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@49801 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r49742 | qwell | 2007-01-05 18:24:38 -0600 (Fri, 05 Jan 2007) | 7 lines
Save 1 whopping byte of allocated memory!
This looks like it may have been a chicken/egg scenario..
You had to call a cleanup func, because everything was allocated.
Then since you had to call a cleanup func, you were forced to allocate - ie; strdup("").
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@49743 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r49457 | kpfleming | 2007-01-04 12:05:47 -0600 (Thu, 04 Jan 2007) | 2 lines
make building of codec_gsm against the system GSM library actually work
........
r49460 | kpfleming | 2007-01-04 12:16:40 -0600 (Thu, 04 Jan 2007) | 2 lines
don't define this type either if LOW_MEMORY is enabled
........
r49461 | kpfleming | 2007-01-04 12:17:01 -0600 (Thu, 04 Jan 2007) | 2 lines
don't do frame header caching in the core if LOW_MEMORY is defined
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@49463 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r49066 | file | 2006-12-30 00:46:57 -0500 (Sat, 30 Dec 2006) | 2 lines
If the Packet2Packet bridge is being broken because of a masquerade then attempt to read a frame in so the masquerade actually happens. Otherwise weirdness will occur. (issue #8696 reported by kjotte)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@49067 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r49009 | file | 2006-12-27 17:28:46 -0500 (Wed, 27 Dec 2006) | 2 lines
ast_copy_string is not available when LOW_MEMORY is used and things are being built in the utils directory, so we need to resort to the old method of strncpy. (issue #8579 reported by mottano)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@49010 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r48998 | kpfleming | 2006-12-27 15:08:30 -0600 (Wed, 27 Dec 2006) | 3 lines
move extern declaration for this option to a header file where it belongs
provide an initial value for 'languageprefix' option, instead of relying on randomness to provide a useful value
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48999 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r48964 | file | 2006-12-25 23:31:58 -0500 (Mon, 25 Dec 2006) | 2 lines
Add an API call that initializes an RTP structure. We need this because chan_sip is cheeky and uses a temporary RTP structure for codec purposes, and the API calls that are used rely on the lock. (Pointed out on asterisk-dev by Andy Wang)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48965 65c4cc65-6c06-0410-ace0-fbb531ad65f3
defined in indications.h to ind_tone_zone_sound and ind_tone_zone,
to avoid conflicts with the structs with the same names
defined in tonezone.h
Hope i haven't missed any instance.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48958 65c4cc65-6c06-0410-ace0-fbb531ad65f3
done for exactly how much memory is needed. This was suggested by Luigi on
the asterisk-dev mailing list. Thanks!
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48933 65c4cc65-6c06-0410-ace0-fbb531ad65f3
this, implementing locking of this list to make it thread-safe.
- Add a "redirect" option to http.conf that allows redirecting one URI to
another. I was inspired to do this while playing with the Asterisk GUI. I
got tired of typing this URL to get to the GUI:
http://localhost:8088/asterisk/static/config/cfgadvanced.html
So, now I have the following line in http.conf:
redirect=/=/asterisk/static/config/cfgadvanced.html
Now, I can type the following into my browser and go to the GUI:
http://localhost:8088
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48930 65c4cc65-6c06-0410-ace0-fbb531ad65f3
before calling it.
This allows generators to set it to NULL when they have nothing to
do there.
Later, the three copies of the code that releases a generator
should be moved to a function.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48766 65c4cc65-6c06-0410-ace0-fbb531ad65f3
On passing remove presumably duplicate code to generate
the message for the manager_hooks:
in the previous version, the message was almost the same as the one sent
to regular sessions, with the exception of the empty line at the end, and
a few (presumably unintentional) differences e.g. timestamps,
debugging, and lowercase headers for "event" and "privilege".
now we reuse the same message as before.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48553 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r48525 | kpfleming | 2006-12-16 15:14:34 -0600 (Sat, 16 Dec 2006) | 2 lines
simplify dependency tracking system, using the compiler's built-in method for generating them, and only doing dependency tracking if developer mode is enabled via the configure script
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48527 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r48521 | kpfleming | 2006-12-16 14:12:41 -0600 (Sat, 16 Dec 2006) | 2 lines
since we really, really have to have autoconfig.h included before all other headers (especially system headers), the Makefile will now force it to happen (this will fix build problems with files like ast_expr2f.c, where we can't control the inclusion order in the file itself)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48522 65c4cc65-6c06-0410-ace0-fbb531ad65f3
renaming them to ast_str ... and putting the
struct ast_threadstorage pointer into the struct ast_str.
This makes the code a lot more readable.
At this point we can use these routines also to
replace ast_build_string().
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48510 65c4cc65-6c06-0410-ace0-fbb531ad65f3
While doing this, add a bit of documentation, and slightly
extend the functionality as follows:
+ a max_len of -1 means that we take whatever the current size
is, and never try to extend the buffer;
+ add support for alloca()-ted dynamic strings, which is very
useful for all cases where we do an ast_build_string() now.
Next step is to simplify the interface by using shorter names
(e.g. ast_str as a prefix) and removing the _thread variant
of the functions by saving the threadstorage reference into
the struct ast_str. This can be done by overloading the
'type' field.
Finally, I will do my best to remove the convoluted interface
that results from trying to support platforms without va_copy().
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48509 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Not long ago i replaced lseek() with fseek() but
forgot that filr FILE's you need ftell to
give you the current position.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48501 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r48472 | file | 2006-12-14 12:36:12 -0500 (Thu, 14 Dec 2006) | 2 lines
Payload values on the RTP structure can change AFTER a bridge has started. This comes from the packet handling of the SIP response when indication that it was answered has been sent. Therefore we need to protect this data with a lock when we read/write. (issue #8232 reported by tgrman)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48473 65c4cc65-6c06-0410-ace0-fbb531ad65f3
reducing indentation and normalizing loops.
While doing this, remove some unused variables,
fix an uninitialized string (idaction), and mark
some places where the behaviour is not what we would expect
(e.g. an empty context is reported as an error same as
a non-existent one). Given that this function is
not in 1.4, the above can be changed without too many
backward compatibility concerns.
Not applicable to 1.4 or below.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48458 65c4cc65-6c06-0410-ace0-fbb531ad65f3
matching word (e.g. "sip<TAB>"); this is implemented by this one-line change
- for (;; dst++, src += n) {
+ for (;src < argindex; dst++, src += n) {
However this code is not exactly trivial to understand, so
i am also adding some comments to help figuring out what it does.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48408 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Long explaination:
The behaviour of the underlying malloc(0) differs depending on the
operating system. Some return NULL (SysV behaviour); some still
allocate a small chunk of memory and return a valid pointer (e.g.
traditional BSD); some (e.g. FreeBSD 6.x) return a non-null pointer
that causes a memory fault if used, even just for reading.
Given the above variety, better never call malloc(0).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48389 65c4cc65-6c06-0410-ace0-fbb531ad65f3
are passed as an argument.
- Update the code in main/http.c to use the new interface
(the diff is large but mostly mechanical, due to the name change of
several variables);
- And since now it is trivial, implement "AMI over TLS", and document
the possible options in manager.conf
- And since the test client (openssl s_client -connect host:port )
does not generate \r\n as a line terminator, make get_input()
also accept just a \n as a line terminator (Mac users: do you
also need the \r-only version ?)
The option parsing in manager.conf is not very efficient, and needs
to be cleaned up and made similar to what we have in http.conf
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48351 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r47986 | oej | 2006-11-24 07:00:19 -0700 (Fri, 24 Nov 2006) | 6 lines
Doxygen update
- Document cause codes
- Document a bit more on channel variables - global, predefined and local
- Fix some doxygen in channel.h. Adding one comment for two definitions does not
work. They won't be copied to each.
................
r47995 | murf | 2006-11-24 10:40:49 -0700 (Fri, 24 Nov 2006) | 1 line
This fix inspired by a patch supplied in bug 8189, which points out problems with the PLC code
................
r47997 | murf | 2006-11-24 11:17:25 -0700 (Fri, 24 Nov 2006) | 1 line
removed the svnmerge-integrated property from trunk; it's confusing svnmerge in newly created branches
................
r48001 | rizzo | 2006-11-25 02:02:42 -0700 (Sat, 25 Nov 2006) | 5 lines
set pointers to NULL after freeing memory to avoid multiple free()
probably 1.4/1.2 issue as well if someone can look into that.
................
r48003 | oej | 2006-11-25 02:45:57 -0700 (Sat, 25 Nov 2006) | 9 lines
- Adding comment on suspicious memory allocation. Seems like it's never freed, but I don't
have a clear understanding of the frame allocation/deallocation, so I just mark this
for investigation. (Reported by Ed Guy). We're trying to see if a free() hurts...
- Doxygen comments on p2p rtp bridge stuff. I am a bit worried about shortcutting
rtcp this way, but will need feedback from rtcp gurus. This should work for
video calls too, and possibly UDPTL.
................
r48004 | oej | 2006-11-25 02:48:30 -0700 (Sat, 25 Nov 2006) | 2 lines
Changing ERROR to lesser level. Imported from 1.2/1.4
................
r48008 | rizzo | 2006-11-25 10:37:04 -0700 (Sat, 25 Nov 2006) | 7 lines
generalize a bit the functions used to create an tcp socket
and then run a service on it.
The code in manager.c does essentially the same things,
so we will be able to reuse the code in here (probably
moving it to netsock.c or another appropriate library file).
................
r48009 | mattf | 2006-11-25 13:30:04 -0700 (Sat, 25 Nov 2006) | 1 line
Updates to show linkset command
................
r48010 | mattf | 2006-11-25 13:54:38 -0700 (Sat, 25 Nov 2006) | 2 lines
Add ss7 show linkset command
................
r48011 | mattf | 2006-11-25 14:32:33 -0700 (Sat, 25 Nov 2006) | 1 line
Make sure we don't send a group reset on a group larger than 32 CICs
................
r48012 | mattf | 2006-11-25 14:35:23 -0700 (Sat, 25 Nov 2006) | 1 line
bug fix
................
r48013 | mattf | 2006-11-25 14:46:58 -0700 (Sat, 25 Nov 2006) | 1 line
Make compiler happier
................
r48014 | mattf | 2006-11-25 14:50:42 -0700 (Sat, 25 Nov 2006) | 1 line
Little fix so we use the right message
................
r48016 | murf | 2006-11-25 17:15:42 -0700 (Sat, 25 Nov 2006) | 9 lines
Merged revisions 48015 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r48015 | murf | 2006-11-25 17:01:34 -0700 (Sat, 25 Nov 2006) | 1 line
A little bit of func_cdr documentation upgrade-- no bug# involved, although 8221 may have inspired it.
........
................
r48018 | murf | 2006-11-25 17:31:13 -0700 (Sat, 25 Nov 2006) | 9 lines
Merged revisions 48017 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r48017 | murf | 2006-11-25 17:26:16 -0700 (Sat, 25 Nov 2006) | 1 line
might as well also document the raw values of the flag vars
........
................
r48019 | russell | 2006-11-25 23:55:33 -0700 (Sat, 25 Nov 2006) | 6 lines
- Add some comments on thread storage with a brief explanation of what it is
as well as what the motivation is for using it.
- Add a comment by the declaration of ast_inet_ntoa() noting that this function
is not reentrant, and the result of a previous call to the function is no
longer valid after calling it again.
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48350 65c4cc65-6c06-0410-ace0-fbb531ad65f3
the infrastructure exposed in http.c earlier today.
As a bonus, now we can restart the session on a different
port just reloading the module.
On passing, fix a bug in the handling of 'enabled' in the configuration
file - previously, a missing "enabled=" line in manager.conf meant
"whatever the state was before" instead of a specific value.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48338 65c4cc65-6c06-0410-ace0-fbb531ad65f3
as described in
http://lists.digium.com/pipermail/asterisk-dev/2006-December/025213.html
In detail, this commit does the following:
b) change the function get_input() to use fread() instead of read()
to collect the data. One can still do the ast_wait_for_input() on
the original descriptor returned by accept().
c) change the function send_string() to work on the FILE *.
As a side effect, this change now really guarantees that
we don't spend more than "writetimeout" milliseconds on
each line sent.
d) modify the function action_command() so that it creates a
temporary file descriptor to be passed to ast_cli_command(),
and then read back the data from the temp file and write it
to the output with send_string(). The code is similar to
what is done in generic_http_callback() to support AMI-over-HTTP.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48332 65c4cc65-6c06-0410-ace0-fbb531ad65f3
and implement services over tcp and/or tcp-tls.
This commit is nothing more than moving structure definitions
(and documentation) from main/http.c to include/asterisk/http.h
(temporary location until we find a better place), and removing the
'static' qualifier from server_root() and server_start().
The name change (adding the ast_ prefix as a minimum, and then
possibly a more meaningful name) is postponed to future commits.
Does not apply to other versions of asterisk.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48324 65c4cc65-6c06-0410-ace0-fbb531ad65f3
r48273 dealt with the comments and such, this deals with the code itself.
(This couldn't have been easily done if it weren't for 48273 - thanks again for that merbanan)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48276 65c4cc65-6c06-0410-ace0-fbb531ad65f3
implementing T.140 support in RTP.
T.140/RFC 4351 is TDD over IP - text telephony for hearing impaired.
It defines a realtime text chat, much like the old "talk" application
in Unix.
T.140 is character by character in real time. It's not
the same as our current MESSAGE format - that is more like IM, but
can be gatewayed to MESSAGE with a text "codec" if needed.
More patches will follow, as soon as we've separated this code from
the video capabilities functions in the videocaps branch.
Code by John Martin, Aupix (disclaimer on file)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48258 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- remove coef_in.h and coef_out.h that was only included as data definitions in fskmodem.c
If you understand spanish, please help us translate the comments in fskmodem.c. Thanks!
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48205 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Encapsulate RTP timers to the RTP structure, so we have one set for video and one for audio
- Document RTP keepalive configuration option
- Cleanup and document the monitor support function to hangup on RTP timeouts
- Add RTP keepalive to SIP show settings
Imported from 1.4 with modifications for trunk.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48200 65c4cc65-6c06-0410-ace0-fbb531ad65f3
in both the append and non-append modes. Also, always truncating the partial
write makes the behavior of the function more consistent, where in any type of
write, no partial result is left in the buffer.
Thanks for the feedback, luigi
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48109 65c4cc65-6c06-0410-ace0-fbb531ad65f3
and also add a more verbose comment explaining why it is only needed in the
case of appending to the string for any curious readers that come along in the
future.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48103 65c4cc65-6c06-0410-ace0-fbb531ad65f3
an extra allocation on a path where we have way too many already.
Unfortunately the AMI-over-HTTP requires multiple copies,
because we need to generate a header, then the raw output to
an intermediate buffer, then convert it to html/xml, and
finally copy everything into a malloc'ed buffer because
that's what the generic_http_callback interface expects.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48090 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ast_dynamic_str_thread_build_va_couldnt_we_choose_a_shorter_name()
I am unsure whether the truncation of the string in case of a failed
attempt should be done unconditionally. See the XXX mark.
Russel, ideas ?
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48084 65c4cc65-6c06-0410-ace0-fbb531ad65f3
to simplify the body of the main loop of the accepting thread.
Rename purge_unused() to purge_events() so one knows what the
function does.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48081 65c4cc65-6c06-0410-ace0-fbb531ad65f3
+ use a wrapper around ast_carefulwrite(), used in two places,
to make life easier when we decide to use a different interface
to the socket.
+ put an ast_verbose() message on astman_append on a case that
should never happen now that we use a temporary file for
AMI-over-HTTP sessions
+ document and slightly simplify process_events() by removing
unnecessary parentheses.
+ in get_input(), use ast_wait_for_input() instead of poll().
We may want to move to a completely non-blocking
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48080 65c4cc65-6c06-0410-ace0-fbb531ad65f3
causing the http threads to do busy waiting around the socket...
Fix the mistake, sorry for the inconvenience!
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48074 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Because https is more secure than http, it usually
makes sense to keep this service more open than the
one on the unencrypted port.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48071 65c4cc65-6c06-0410-ace0-fbb531ad65f3
function doing work on the socket. This is another generalization
to provide a generic mechanism to open TCP/TLS socket with a thread
managing the accpet and children threads managing the individual
sessions.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48067 65c4cc65-6c06-0410-ace0-fbb531ad65f3
and then run a service on it.
The code in manager.c does essentially the same things,
so we will be able to reuse the code in here (probably
moving it to netsock.c or another appropriate library file).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48008 65c4cc65-6c06-0410-ace0-fbb531ad65f3
have a clear understanding of the frame allocation/deallocation, so I just mark this
for investigation. (Reported by Ed Guy). We're trying to see if a free() hurts...
- Doxygen comments on p2p rtp bridge stuff. I am a bit worried about shortcutting
rtcp this way, but will need feedback from rtcp gurus. This should work for
video calls too, and possibly UDPTL.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48003 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Document cause codes
- Document a bit more on channel variables - global, predefined and local
- Fix some doxygen in channel.h. Adding one comment for two definitions does not
work. They won't be copied to each.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@47986 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Russell Bryant
Joshua Colp
Mark Michelson
Jason Parker
Steve Murphy
Doug Bailey
Tilghman Lesher
Kevin P. Fleming
Olle Johansson
Claude Patry
Dwayne M. Hubbard
Luigi Rizzo
Paul Cadach