608 Commits (e682580df40a6ada9a3ba3d8a904966b393c8f8c)

Author	SHA1	Message	Date
Torrey Searle	e682580df4	contrib/script/sip_to_pjsip: implement 'all' for allow/disallow ... when 'all' is specified in an allow or disallow section, it should erase all values from the inverse section in the default config. E.G. allow=all should erase any deny values from default config & vice-versa ASTERISK-27333 #close Change-Id: I99219478fb98f08751d769daaee0b7795118a5a6	8 years ago
Torrey Searle	7155055b9f	contrib/thirdparty/sip_to_pjsip: add additional flag mappings ... add mappings for udptl redundancy, rtptimeout, and debug flags Change-Id: Ie73cf5c83c05dee01eb9624ede76c1a30225d73a	8 years ago
George Joseph	752f0533dd	res_pjsip: Add handling for incoming unsolicited MWI NOTIFY ... A new endpoint parameter "incoming_mwi_mailbox" allows Asterisk to receive unsolicited MWI NOTIFY requests and make them available to other modules via the stasis message bus. res_pjsip_pubsub has a new handler "pubsub_on_rx_mwi_notify_request" that parses a simple-message-summary body and, if endpoint->incoming_mwi_account is set, calls ast_publish_mwi_state with the voice-message counts from the message. Change-Id: I08bae3d16e77af48fcccc2c936acce8fc0ef0f3c	8 years ago
Jenkins2	58f6d0320e	Merge "alembic: Fix typo in add_auto_info_to_endpoint_dtmf_mode" into 15	8 years ago
George Joseph	3552cb511d	alembic: Fix typo in add_auto_info_to_endpoint_dtmf_mode ... The downgrade function was missing "_v2" at the end of the alter column type. Change-Id: Iaa9bcef48d6f3590ce07a61342d8e66f00263d8e	8 years ago
Florian Floimair	9620a2bd20	alembic: Add support for MS-SQL ... MS-SQL has no native Enum-type support and therefore needs to work with constraints. Since these constraints need unique names the suggested approach referenced in the following alembic documentation has been applied: http://bit.ly/2x9r8pb ASTERISK-27255 #close Change-Id: I8b579750dae0c549f1103ee50172644afb9b2f95	8 years ago
George Joseph	3a6291b534	Merge "alembic: Fix enum creation for dtls_fingerprint" into 15	8 years ago
George Joseph	2d9aac9f28	alembic: Fix enum creation for dtls_fingerprint ... Change-Id: Ic061c5066a146616a68376881c7e4cf6d6e7e7db	8 years ago
Florian Floimair	e5985c9abe	alembic: fix erroneous commit for add_prune_on_boot ... Added include for postgresql ENUM type and redefined values in the same way as in the other migration scripts. ASTERISK-27254 #close Change-Id: Id667304cdf3891b1c2f7d35fab3e2a84026159fa	8 years ago
Florian Floimair	5b91992c27	alembic: Add dtls_fingerprint column in ps_endpoints table ... The ps_endpoints table was missing the dtls_fingerprint column introduced with commit adba2a8d7f. ASTERISK-27168 #close Change-Id: I9cb5006f7f50718b5239919562773adabb334cfd	9 years ago
Richard Mudgett	b9f6697f06	res_pjsip: Remove ephemeral registered contacts on transport shutdown. ... The fix for the issue is broken up into three parts. This is part two which handles the server side of REGISTER requests when rewrite_contact is enabled. Any registered reliable transport contact becomes invalid when the transport connection becomes disconnected. * Monitor the rewrite_contact's reliable transport REGISTER contact for shutdown. If it is shutdown then the contact must be removed because it is no longer valid. Otherwise, when the client attempts to re-REGISTER it may be blocked because the invalid contact is there. Also if we try to send a call to the endpoint using the invalid contact then the endpoint is not likely to see the request. The endpoint either won't be listening on that port for new connections or a NAT/firewall will block it. * Prune any rewrite_contact's registered reliable transport contacts on boot. The reliable transport no longer exists so the contact is invalid. * Websockets always rewrite the REGISTER contact address and the transport needs to be monitored for shutdown. * Made the websocket transport set a unique name since that is what we use as the ao2 container key. Otherwise, we would not know which transport we find when one of them shuts down. The names are also used for PJPROJECT debug logging. * Made the websocket transport post the PJSIP_TP_STATE_CONNECTED state event. Now the global keep_alive_interval option, initially idle shutdown timer, and the server REGISTER contact monitor can work on wetsocket transports. * Made the websocket transport set the PJSIP_TP_DIR_INCOMING direction. Now initially idle websockets will automatically shutdown. ASTERISK-27147 Change-Id: I397a5e7d18476830f7ffe1726adf9ee6c15964f4	9 years ago
Kevin Harwell	b0c016cf6e	alembic/res_pjsip: Add "webrtc" configuration option ... When the "webrtc" option was added in res_pjsip it was not added to the alembic scripts. This patch adds the option for alembic. Also, changed the sorcery configuration type to an OPT_YESNO_T value instead of an OPT_BOOL_T so if this field is ever written to a database it will write out the correct value. ASTERISK-27119 #close Change-Id: I3e199f060aea25e193c439fc5cf96be4d3ed1c7b	9 years ago
Jenkins2	fab609deeb	Merge "Core: Add support for systemd socket activation." into 15	9 years ago
Corey Farrell	eea9da2f42	Core: Add support for systemd socket activation. ... This change adds support for socket activation of certain SOCK_STREAM listeners in Asterisk: * AMI / AMI over TLS * CLI * HTTP / HTTPS Example systemd units are provided. This support extends to any socket which is initialized using ast_tcptls_server_start, so any unknown modules using this function will support socket activation. Asterisk continues to function as normal if socket activation is not enabled or if systemd development headers are not available during build. ASTERISK-27063 #close Change-Id: Id814ee6a892f4b80d018365c8ad8d89063474f4d	9 years ago
George Joseph	94de9d3eea	Restore the incorrectly deleted spandspflow2pcap.log ... Change-Id: Iafe78cf0fb1e7064223d4dea279eeb776c8fa8e5	9 years ago
Sean Bright	6650ae43e1	corosync: Fix corosync library name in configure.ac ... Also add new corosync packages to install_prereq. Reported by Travis Ryan in #asterisk-dev Change-Id: Ib861c95ba630fed62dc54e56784ad8446ed9d2db	9 years ago
George Joseph	3e8d628c0e	Update AMI and ARI versions for master/15 and update UPDATE.txt ... AMI goes from 3.2.0 to 4.0.0 ARI goes from 2.0.0 to 3.0.0 Copied UPGRADE.txt -> UPGRADE-15.txt Created new UPGRADE.txt Removed a log file that was accidentally checked in a while ago Change-Id: I1c794f910038459b13e16f9c3a12c44e56f142f7	9 years ago
George Joseph	7a4f577eb7	Fix alembic branches ... Change-Id: I04f607f084bda9b1b7f626e8e9735c37dc751187	9 years ago
Torrey Searle	fb7247c57c	res_pjsip: Add DTMF INFO Failback mode ... The existing auto dtmf mode reverts to inband if 4733 fails to be negotiated. This patch adds a new mode auto_info which will switch to INFO instead of inband if 4733 is not available. ASTERISK-27066 #close Change-Id: Id185b11e84afd9191a2f269e8443019047765e91	9 years ago
Mark Michelson	45df25a579	chan_pjsip: Add support for multiple streams of the same type. ... The stream topology (list of streams and order) is now stored with the configured PJSIP endpoints and used during the negotiation process. Media negotiation state information has been changed to be stored in a separate object. Two of these objects exist at any one time on a session. The active media state information is what was previously negotiated and the pending media state information is what the media state will become if negotiation succeeds. Streams and other state information is stored in this object using the index (or position) of each individual stream for easy lookup. The ability for a media type handler to specify a callback for writing has been added as well as the ability to add file descriptors with a callback which is invoked when data is available to be read on them. This allows media logic to live outside of the chan_pjsip module. Direct media has been changed so that only the first audio and video stream are directly connected. In the future once the RTP engine glue API has been updated to know about streams each individual stream can be directly connected as appropriate. Media negotiation itself will currently answer all the provided streams on an offer within configured limits and on an offer will use the topology created as a result of the disallow/allow codec lines. If a stream has been removed or declined we will now mark it as such within the resulting SDP. Applications can now also request that the stream topology change. If we are told to do so we will limit any provided formats to the ones configured on the endpoint and send a re-invite with the new topology. Two new configuration options have also been added to PJSIP endpoints: max_audio_streams: determines the maximum number of audio streams to offer/accept from an endpoint. Defaults to 1. max_video_streams: determines the maximum number of video streams to offer/accept from an endpoint. Defaults to 1. ASTERISK-27076 Change-Id: I8afd8dd2eb538806a39b887af0abd046266e14c7	9 years ago
Alexei Gradinari	7a46309d3d	res_pjsip: New endpoint option "notify_early_inuse_ringing" ... This option was added to control whether to notify dialog-info state 'early' or 'confirmed' on Ringing when already INUSE. The value "yes" is useful for some SIP phones (Cisco SPA) to be able to indicate and pick up ringing devices. ASTERISK-26919 #close Change-Id: Ie050bc30023543c7dfb4365c5be3ce58c738c711	9 years ago
Alexei Gradinari	808f299808	res_pjsip: New endpoint option "refer_blind_progress" ... This option was added to turn off notifying the progress details on Blind Transfer. If this option is not set then the chan_pjsip will send NOTIFY "200 OK" immediately after "202 Accepted". Some SIP phones like Mitel/Aastra or Snom keep the line busy until receive "200 OK". ASTERISK-26333 #close Change-Id: Id606fbff2e02e967c02138457badc399144720f2	9 years ago
Joshua Colp	199d4776c0	alembic: Add table for 'resource_list' PJSIP RLS type. ... This change adds an Alembic migration which adds a ps_resource_list table that can contain resource_list RLS configuration objects. ASTERISK-26929 Change-Id: I7c888fafc67b3e87012de974f71ca7a5b8b1ec05	9 years ago
Joshua Colp	270b485f04	pjsip: Add Alembic for PUBLISH support. ... This change adds database tables for the PUBLISH support so it can be configured using realtime. A minor fix to the res_pjsip_publish_asterisk module was done so that it read the sorcery configuration from the correct section. Finally the sample configuration files have been updated. ASTERISK-26928 Change-Id: I81991ae5c75af98d247f7eacd1c0b0a763675952	9 years ago
Sean Bright	7c0b12dc41	alembic: Turn off execute bit on non-executable python scripts ... Change-Id: I744c986da4a38aeff8c00837eb89de7841fbc86c	9 years ago
Richard Begg	6b7697ed48	res_pjsip_session: Enable RFC3578 overlap dialing support. ... Support for RFC3578 overlap dialling (i.e. 484 Response to partially matched destinations) as currently provided by chan_sip is missing from res_pjsip. This patch adds a new endpoint attribute (allow_overlap) [defaults to yes] which when set to yes enables 484 responses to partial destination matches rather than the current 404. ASTERISK-26864 Change-Id: Iea444da3ee7c7d4f1fde1d01d138a3d7b0fe40f6	9 years ago
George Joseph	5013d8f5d3	res_pjsip: Symmetric transports ... A new transport parameter 'symmetric_transport' has been added. When a request from a dynamic contact comes in on a transport with this option set to 'yes', the transport name will be saved and used for subsequent outgoing requests like OPTIONS, NOTIFY and INVITE. It's saved as a contact uri parameter named 'x-ast-txp' and will display with the contact uri in CLI, AMI, and ARI output. On the outgoing request, if a transport wasn't explicitly set on the endpoint AND the request URI is not a hostname, the saved transport will be used and the 'x-ast-txp' parameter stripped from the outgoing packet. * config_transport was modified to accept and store the new parameter. * config_transport/transport_apply was updated to store the transport name in the pjsip_transport->info field using the pjsip_transport->pool on UDP transports. * A 'multihomed_on_rx_message' function was added to pjsip_message_ip_updater that, for incoming requests, retrieves the transport name from pjsip_transport->info and retrieves the transport. If transport->symmetric_transport is set, an 'x-ast-txp' uri parameter containing the transport name is added to the incoming Contact header. * An 'ast_sip_get_transport_name' function was added to res_pjsip. It takes an ast_sip_endpoint and a pjsip_sip_uri and returns a transport name if endpoint->transport is set or if there's an 'x-ast-txp' parameter on the uri and the uri host is an ipv4 or ipv6 address. Otherwise it returns NULL. * An 'ast_sip_dlg_set_transport' function was added to res_pjsip which takes an ast_sip_endpoint, a pjsip_dialog, and an optional pjsip_tpselector. It calls ast_sip_get_transport_name() and if a non-NULL is returned, sets the selector and sets the transport on the dialog. If a selector was passed in, it's updated. * res_pjsip/ast_sip_create_dialog_uac and ast_sip_create_dialog_uas were modified to call ast_sip_dlg_set_transport() instead of their original logic. * res_pjsip/create_out_of_dialog_request was modified to call ast_sip_get_transport_name() and pjsip_tx_data_set_transport() instead of its original logic. * Existing transport logic was removed from endpt_send_request since that can only be called after a create_out_of_dialog_request. * res_pjsip/ast_sip_create_rdata was converted to a wrapper around a new 'ast_sip_create_rdata_with_contact' function which allows a contact_uri to be specified in addition to the existing parameters. (See below) * res_pjsip_pubsub/internal_pjsip_evsub_send_request was eliminated since all it did was transport selection and that is now done in ast_sip_create_dialog_uac and ast_sip_create_dialog_uas. * 'contact_uri' was added to subscription_persistence. This was necessary because although the parsed rdata contact header has the x-ast-txp parameter added (if appropriate), subscription_persistence_update stores the raw packet which doesn't have it. subscription_persistence_recreate was then updated to call ast_sip_create_rdata_with_contact with the persisted contact_uri so the recreated subscription has the correct transport info to send the NOTIFYs. * res_pjsip_session/internal_pjsip_inv_send_msg was eliminated since all it did was transport selection and that is now done in ast_sip_create_dialog_uac. * pjsip_message_ip_updater/multihomed_on_tx_message was updated to remove all traces of the x-ast-txp parameter from the outgoing headers. NOTE: This change does NOT modify the behavior of permanent contacts specified on an aor. To do so would require that the permanent contact's contact uri be updated with the x-ast-txp parameter and the aor sorcery object updated. If we need to persue this, we need to think about cloning permanent contacts into the same store as the dynamic ones on an aor load so they can be updated without disturbing the originally configured value. You CAN add the x-ast-txp parameter to a permanent contact's uri but it would be much simpler to just set endpoint->transport. Change-Id: I4ee1f51473da32ca54b877cd158523efcef9655f	9 years ago
Mark Michelson	10fa49e327	Add rtcp-mux support ... This commit adds support for RFC 5761: Multiplexing RTP Data and Control Packets on a Single Port. Specifically, it enables the feature when using chan_pjsip. A new option, "rtcp_mux" has been added to endpoint configuration in pjsip.conf. If set, then Asterisk will attempt to use rtcp-mux with whatever it communicates with. Asterisk follows the rules set forth in RFC 5761 with regards to falling back to standard RTCP behavior if the far end does not indicate support for rtcp-mux. The lion's share of the changes in this commit are in res_rtp_asterisk.c. This is because it was pretty much hard wired to have an RTP and an RTCP transport. The strategy used here is that when rtcp-mux is enabled, the current RTCP transport and its trappings (such as DTLS SSL session) are freed, and the RTCP session instead just mooches off the RTP session. This leads to a lot of specialized if statements throughout. ASTERISK-26732 #close Reported by Dan Jenkins Change-Id: If46a93ba1282418d2803e3fd7869374da8b77ab5	9 years ago
Matt Jordan	1475604eff	res_pjsip_endpoint_identifier_ip: Add an option to match requests by header ... This patch adds a new features to the endpoint identifier module, 'match_header'. When set, inbound requests are matched by a provided SIP header: value pair. This option works in conjunction with the existing 'match' configuration option, such that if any 'match*' attribute matches an inbound request, the request is associated with the specified endpoint. Since this module now identifies by more than just IP address, appropriate renaming of the module and/or variables can be done in a non-release branch. ASTERISK-26863 #close Change-Id: Icfc14835c962f92e35e67bbdb235cf0589de5453 (cherry picked from commit 30f52d79d7)	9 years ago
George Joseph	e252aff9ad	debug_utilities: Install ast_logescalator to /var/lib/asterisk/scripts ... Forgot to install it with the original patch Change-Id: I8bdb540a6694971ae5fe21f48d532332c6482e4c	9 years ago
George Joseph	ef4deb8ecd	debug_utilities: Add ast_logescalator ... The escalator works by creating a set of startup commands in cli.conf that set up logger channels and issue the debug commands for the subsystems specified. If asterisk is running when it is executed, the same commands will be issued to the running instance. The original cli.conf is saved before any changes are made and can be restored by executing '$prog --reset'. The log output will be stored in... $astlogdir/message.$uniqueid $astlogdir/debug.$uniqueid $astlogdir/dtmf.$uniqueid $astlogdir/fax.$uniqueid $astlogdir/security.$uniqueid $astlogdir/pjsip_history.$uniqueid $astlogdir/sip_history.$uniqueid Some minor tweaks were made to chan_sip, and res_pjsip_history so their history output could be send to a log channel as packets are captured. A minor tweak was also made to manager so events are output to verbose when "manager set debug on" is issued. Change-Id: I799f8e5013b86dc5282961b27383d134bf09e543	9 years ago
George Joseph	d16b3a9917	debug_utilities: Create ast_loggrabber ... ast_loggrabber gathers log files from customizable search patterns, optionally converts POSIX timestamps to a readable format and tarballs the results. Also a few tweaks were made to ast_coredumper. Change-Id: I8bfe1468ada24c1344ce4abab7b002a59a659495 (cherry picked from commit c709152878)	9 years ago
George Joseph	0d53c91fba	debug_utilities: Create the ast_coredumper utility ... This utility allows easy manipulation of asterisk coredumps. * Configurable search paths and patterns for existing coredumps * Can generate a consistent coredump from the running instance * Can dump the lock_infos table from a coredump * Dumps backtraces to separate files... - thread apply 1 bt full -> <coredump>.thread1.txt - thread apply all bt -> <coredump>.brief.txt - thread apply all bt full -> <coredump>.full.txt - lock_infos table -> <coredump>.locks.txt * Can tarball corefiles and optionally delete them after processing * Can tarball results files and optionally delete them after processing * Converts ':' in coredump and results file names '-' to facilitate uploading. Jira for instance, won't accept file names with colons in them. Tested on Fedora24+, Ubuntu14+, Debian6+, CentOS6+ and FreeBSD9+[1]. [1] For *BSDs, the "devel/gdb" package might have to be installed to get a recent gdb. The utility will check all instances of gdb it finds in $PATH and if one isn't found that can run python, it prints a friendly error. Change-Id: I935d37ab9db85ef923f32b05579897f0893d33cd (cherry picked from commit cb47b45560)	9 years ago
Joshua Colp	a7d856cd96	res_pjsip_endpoint_identifier_ip: Add support for SRV lookups. ... This change implements SRV support for the IP based endpoint identifier module. All possible addresses through SRV are looked up and added as matches. If no SRV records are available a fallback to normal host resolution is done. If an IP address is provided then no SRV lookup occurs. This is configured using the "srv_lookups" option on the identify section and defaults to "yes". ASTERISK-26693 Change-Id: I6b641e275bf96629320efa8b479737062aed82ac	9 years ago
Tzafrir Cohen	bab253ac9f	Fixes to various issues reported by pyflakes ... Pyflake is a python (2) source checker. This patch fixes various (mostly trivial) errors and warnings it reports. Change-Id: Ia35c5ac61751b927814cf693994c632c412386ea	9 years ago
Richard Mudgett	d27dee3cca	autosupport: Add 'pjproject show buildopts' ... Change-Id: I8aa55a7c3fb175235ddc7f85e9457d5102d06fa7	9 years ago
Joshua Colp	aed6c219a3	pjsip: Fix a few media bugs with reinvites and asymmetric payloads. ... When channel format changes occurred as a result of an RTP re-negotiation the bridge was not informed this had happened. As a result the bridge technology was not re-evaluated and the channel may have been in a bridge technology that was incompatible with its formats. The bridge is now unbridged and the technology re-evaluated when this occurs. The chan_pjsip module also allowed asymmetric codecs for sending and receiving. This did not work with all devices and caused one way audio problems. The default has been changed to NOT do this but to match the sending codec to the receiving codec. For users who want asymmetric codecs an option has been added, asymmetric_rtp_codec, which will return chan_pjsip to the previous behavior. The codecs returned by the chan_pjsip module when queried by the bridge_native_rtp module were also not reflective of the actual negotiated codecs. The nativeformats are now returned as they reflect the actual negotiated codecs. ASTERISK-26423 #close Change-Id: I6ec88c6e3912f52c334f1a26983ccb8f267020dc	9 years ago
Joshua Colp	403c4f5833	pjsip: Support dual stack automatically. ... This change adds support for dual stack automatically. No configuration is required and the IP address and version in the SIP messages and SDP will be automatically changed based on the transport over which the message is being sent. RTP usage has also been changed to listen on both IPv4 and IPv6 simultaneously to allow media to flow, and to allow ICE support on both simultaneously. This also allows failover between IPv6 and IPv4 to work as expected. ASTERISK-26309 #close Change-Id: I235a421d8f9a326606d861b449fa6fe3a030572d	9 years ago
zuul	1ca148cae8	Merge "Add text of cdr directory into README.md for ast-db-manage"	9 years ago
George Joseph	442b597929	alembic: Allow cdr, config and voicemail to exist in the same schema ... cdr, config and voicemail are all separate alembic trees. Because alembic's default is to use a table named 'alembic_version' to store the current tree revision, the 3 trees can't exist in the same schema without stepping on each other. Now each tree uses 'alembic_version_<tree_name>' as the version table. Each tree's env.py script now first checks for 'alembic_version'. If it finds it AND its revision is in the tree's history, the script renames it to 'alembic_version_<tree_name>'. Regardless, the script then continues with the migration using 'alembic_version_<tree_name>' and creates that table if it's not found. The result is that if an existing 'alembic_version' table was found but it didn't belong to this tree, it's left alone and 'alembic_version_<tree_name>' is used or created. WARNING: If multiple trees are using the same schema, they MUST NOT CRU or D any objects with names that might exist in the other trees. An example would be 'yesno_values' type. If two trees perform operations on it, one tree could pull it out from under the other. Thankfully we currently don't share any names among cdr, config and voicemail. NOTE: Since the env.py scripts in each tree were identical, a common env.py has been placed in the ast-db-manage directory and a symlink to it has been placed in each tree directory. ASTERISK-24311 #close Reported-by: Dafi Ni Change-Id: I4d593f000350deb5d21a14fa1e9bc3896844d898	9 years ago
Rodrigo Ramírez Norambuena	79532bca75	Add text of cdr directory into README.md for ast-db-manage ... Change-Id: I68321c4bea50730c39fdb486e5f23aeadd1ad636	9 years ago
zuul	e2d3882b30	Merge "sip_to_pjsip.py: Map legacy_useroption_parsing."	9 years ago
zuul	cbd6f7001e	Merge "res_pjsip: Add ignore_uri_user_options option."	9 years ago
zuul	50c3bb2631	Merge "contrib: Let safe_asterisk script continue without /dev/tty9."	9 years ago
Richard Mudgett	82ec58aa91	sip_to_pjsip.py: Map legacy_useroption_parsing. ... Map the sip.conf general section legacy_useroption_parsing to the new pjsip.conf global ignore_uri_user_options. ASTERISK-26316 Reported by: Kevin Harwell Change-Id: I78108a31995db19d41f4e1a07b3324692c5363fc	9 years ago
Richard Mudgett	ba362822f3	res_pjsip: Add ignore_uri_user_options option. ... This implements the chan_sip legacy_useroption_parsing option but with a better name. * Made the caller-id number and redirecting number strings obtained from incoming SIP URI user fields always truncated at the first semicolon. People don't care about anything after the semicolon showing up on their displays even though the RFC allows the semicolon. ASTERISK-26316 #close Reported by: Kevin Harwell Change-Id: Ib42b0e940dd34d84c7b14bc2e90d1ba392624f62	9 years ago
zuul	9d54dd04bb	Merge "res/res_pjsip: Add preferred_codec_only config to pjsip endpoint."	9 years ago
Walter Doekes	56caf5402c	contrib: Let safe_asterisk script continue without /dev/tty9. ... If you use the safe_asterisk script, it uses hardcoded defaults before running configurable values from /etc/asterisk/startup.d. The hardcoded default has TTY=9. Some containerized environments don't have such a TTY, and safe_asterisk would stop. The custom configuration from /etc/asterisk/startup.d/* isn't read until after it stopped, so changing TTY in a custom config did not help. This changeset changes safe_asterisk to continue if the TTY setting was untouched and /dev/tty9 and /dev/vc/9 aren't found. Change-Id: I2c7cdba549b77f418a0af4cb1227e8e6fe4148fc	9 years ago
Aaron An	2a50c29101	res/res_pjsip: Add preferred_codec_only config to pjsip endpoint. ... This patch add config to pjsip by endpoint. ;preferred_codec_only=yes ; Respond to a SIP invite with the single most preferred codec ; rather than advertising all joint codec capabilities. This ; limits the other side's codec choice to exactly what we prefer. ASTERISK-26317 #close Reported by: AaronAn Tested by: AaronAn Change-Id: Iad04dc55055403bbf5ec050997aee2dadc4f0762	9 years ago
zuul	05240e2b57	Merge "sip_to_pjsip.py: Map canreinvite as directmedia alias."	9 years ago