https://origsvn.digium.com/svn/asterisk/trunk
................
r156817 | mmichelson | 2008-11-14 09:20:03 -0600 (Fri, 14 Nov 2008) | 18 lines
Merged revisions 156816 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r156816 | mmichelson | 2008-11-14 09:18:59 -0600 (Fri, 14 Nov 2008) | 10 lines
If the prompt to reenter a voicemail password timed out, it
resulted in the password not being saved, even if the input matched
what you gave when first prompted to enter a new password. This is
because the return value of ast_readstring was checked, but not checked
properly.
This bug was discovered by Jared Smith during an Asterisk training course.
Thanks for reporting it!
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@156819 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r156756 | tilghman | 2008-11-13 18:43:13 -0600 (Thu, 13 Nov 2008) | 13 lines
Merged revisions 156755 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r156755 | tilghman | 2008-11-13 18:41:37 -0600 (Thu, 13 Nov 2008) | 6 lines
ast_waitfordigit() requires that the channel be up, for no good logical
reason. This prevents While/EndWhile from working within the "h"
extension.
Reported by: jgalarneau (for ABE C.2)
Fixed by: me
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@156757 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r156228 | jpeeler | 2008-11-12 12:32:46 -0600 (Wed, 12 Nov 2008) | 16 lines
Merged revisions 156178 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r156178 | jpeeler | 2008-11-12 11:53:44 -0600 (Wed, 12 Nov 2008) | 8 lines
(closes issue #13173)
Reported by: pep
This change adds an announce_thread responsible for playing announcements to an existing conference. This allows all announcing to be immediately stopped if necessary but more importantly allows other threads that need to play something to not block. There are multiple benefits to this, but the actual bug is for solving the scenario for a channel to be unusable after hang up for the entire duration of the parting announcement. The parting announcement can be extremely long depending on what the user recorded upon joining the conference.
Reviewed by Russell on Review Board:
http://reviewboard.digium.com/r/25/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@156247 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r156169 | mmichelson | 2008-11-12 11:41:56 -0600 (Wed, 12 Nov 2008) | 15 lines
Merged revisions 156167 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r156167 | mmichelson | 2008-11-12 11:38:33 -0600 (Wed, 12 Nov 2008) | 7 lines
When doing some tests, I was having a crash at the end of every call
if an attended transfer occurred during the call. I traced the cause to
the CDR on one of the channels being NULL. murf suggested a check in
the end bridge callback to be sure the CDR is non-NULL before proceeding,
so that's what I'm adding.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@156171 65c4cc65-6c06-0410-ace0-fbb531ad65f3
------------------------------------------------------------------------
r153709 | kpfleming | 2008-11-02 17:34:39 -0600 (Sun, 02 Nov 2008) | 3 lines
instead of trying to forcibly load res_agi when app_stack is loaded (even if the administrator didn't want it loaded), use GCC weak symbols to determine whether it was loaded already or not; if it was loaded, then use it.
------------------------------------------------------------------------
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@153711 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r153181 | twilson | 2008-10-31 13:55:33 -0500 (Fri, 31 Oct 2008) | 5 lines
Recent CDR fixes moved execution of the 'h' exten into the bridging code, so variables that were set after ast_bridge_call was called would not show up in the 'h' exten. Added a callback function to handle setting variables, etc. from w/in the bridging code. Calls back into a nested function within the function calling ast_bridge_call
(closes issue #13793)
Reported by: greenfieldtech
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@153266 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r152646 | mmichelson | 2008-10-29 15:53:53 -0500 (Wed, 29 Oct 2008) | 9 lines
If there was no named defined in a voicemail.conf mailbox
entry, then app_directory would crash when attempting to
read that entry from the file. We now check for the NULL
or empty string properly so that there will be no crash.
(closes issue #13804)
Reported by: bluecrow76
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@152648 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r152605 | murf | 2008-10-28 23:47:13 -0600 (Tue, 28 Oct 2008) | 22 lines
Merged revisions 152538 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r152538 | murf | 2008-10-28 23:19:04 -0600 (Tue, 28 Oct 2008) | 14 lines
A little documentation cross-ref between features and
dial and queue... I wasted some time (stupidly) trying
to get the one-touch parking stuff working, because it
didn't occur to me that I had to also have the corresponding
options in the dial command! Duh! (In all this time, I never
set this up before!)
So, to keep some poor fool from suffering the same fate,
I made the features.conf.sample file mention the corresponding
opts in dial/queue; and the docs for dial/app specifically
mention the corresponding decls in the feature.conf file.
I hope this doesn't spoil some vast, eternal plan...
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@152606 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r152536 | murf | 2008-10-28 23:01:00 -0600 (Tue, 28 Oct 2008) | 57 lines
Merged revisions 152535 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r152535 | murf | 2008-10-28 22:36:32 -0600 (Tue, 28 Oct 2008) | 46 lines
The magic trick to avoid this crash is not to
try to find the channel by name in the list,
which is slow and resource consuming, but rather
to pay attention to the result codes from the
ast_bridge_call, to which I added the
AST_PBX_NO_HANGUP_PEER_PARKED value, which
now are returned when a channel is parked.
Why? because CDR's aren't generated via parking,
so nothing is needed, but if a transfer occurred,
there are critical things I need.
If you get AST_PBX_KEEPALIVE,
then don't touch the channel pointer.
If you get AST_PBX_NO_HANGUP_PEER, or
AST_PBX_NO_HANGUP_PEER_PARKED, then don't
touch the peer pointer.
Updated the several places where the results
from a bridge were not being properly obeyed,
and fixed some code I had introduced so that
the results of the bridge were not overridden
(in trunk).
All the places that previously tested for
AST_PBX_NO_HANGUP_PEER now have to check for
both AST_PBX_NO_HANGUP_PEER and AST_PBX_NO_HANGUP_PEER_PARKED.
I tested this against the 4 common parking
scenarios:
1. A calls B; B answers; A parks B; B hangs up while A is getting the parking
slot announcement, immediately after being put on hold.
2. A calls B; B answers; A parks B; B hangs up after A has been hung up, but
before the park times out.
3. A calls B; B answers; B parks A; A hangs up while B is getting the parking slot announcement, immediately after being put on hold.
4. A calls B; B answers; B parks A; A hangs up after B has been hung up, but before the park times out.
No crash.
I also ran the scenarios above against valgrind, and accesses looked good.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@152537 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r152369 | tilghman | 2008-10-28 12:07:39 -0500 (Tue, 28 Oct 2008) | 15 lines
Merged revisions 152368 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r152368 | tilghman | 2008-10-28 12:04:56 -0500 (Tue, 28 Oct 2008) | 8 lines
Reset all DIAL variables back to blank, in case Dial is called multiple times
per call (which could otherwise lead to inconsistent status reports).
(closes issue #13216)
Reported by: ruddy
Patches:
20081014__bug13216.diff.txt uploaded by Corydon76 (license 14)
Tested by: ruddy
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@152370 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r151371 | tilghman | 2008-10-21 10:20:50 -0500 (Tue, 21 Oct 2008) | 5 lines
Default file modes should always be full read and write, to allow the system
administrator to make the decision of what permissions will actually be given,
through the use of the process umask.
(Closes issue# 13751)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@151372 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r151101 | kpfleming | 2008-10-19 22:11:28 +0300 (Sun, 19 Oct 2008) | 13 lines
cleaup of the TCP/TLS socket API:
1) rename 'struct server_args' to 'struct ast_tcptls_session_args', to follow coding guidelines
2) make ast_make_file_from_fd() static and rename it to something that indicates what it really is for (again coding guidelines)
3) rename address variables inside 'struct ast_tcptls_session_args' to be more descriptive (dare i say it... coding guidelines)
4) change ast_tcptls_client_start() to use the new 'remote_address' field of the session args for the destination of the connection, and use the 'local_address' field to bind() the socket to the proper source address, if one is supplied
5) in chan_sip, ensure that we pass in the PP address we are bound to when creating outbound (client) connections, so that our connections will appear from the correct address
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@151135 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r149201 | mmichelson | 2008-10-14 17:41:13 -0500 (Tue, 14 Oct 2008) | 20 lines
Merged revisions 149200 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r149200 | mmichelson | 2008-10-14 17:40:42 -0500 (Tue, 14 Oct 2008) | 12 lines
Update the queue with the correct number of calls and
whether the call was completed within the service level
when a transfer takes place. This way, we do not "break"
the leastrecent and fewestcalls strategies by not logging
a call until after the transferred call has ended.
(closes issue #13395)
Reported by: Marquis
Patches:
app_queue.c.transfer.patch uploaded by Marquis (license 32)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@149203 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r148200 | seanbright | 2008-10-09 20:42:13 -0400 (Thu, 09 Oct 2008) | 12 lines
Don't include logger.h in asterisk.h by default as it is causing problems building
app_voicemail. Instead, include it where it is needed. This turned out to be a
relatively minor issue because other headers include logger.h as well.
Need to test -addons before merging this back to 1.6.0.
(closes issue #13605)
Reported by: tomo1657
Patches:
13605_seanbright.diff uploaded by seanbright (license 71)
Tested by: mmichelson
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@148240 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r148144 | mmichelson | 2008-10-09 18:30:47 -0500 (Thu, 09 Oct 2008) | 10 lines
Read the callerid in the correct order and make sure to
read the Urgent flag value from the IMAP headers.
(closes issue #13652)
Reported by: jaroth
Patches:
imapheaders.patch uploaded by jaroth (license 50)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@148151 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r147592 | tilghman | 2008-10-08 14:08:32 -0500 (Wed, 08 Oct 2008) | 8 lines
Correct a typo in the help; also, ensure that the date and time are correctly
set, if not specified in the message.
(Closes issue #13594, closes issue #13595)
Reported by: alecdavis
Patches:
20081001__bug13595.diff.txt uploaded by Corydon76 (license 14)
Tested by: alecdavis
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@147593 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r147050 | seanbright | 2008-10-07 08:01:36 -0400 (Tue, 07 Oct 2008) | 8 lines
Make sure to compare the correct number of characters when special-casing
our DAHDI operator mode stuff. Technically, it would work fine, as 'DAH'
is currently unique amongst our channel technologies, but as Jared points
out:
<@jsmith> Sure... as long as the technology starts whith DAH.... but
it could be DAHDOO!
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@147052 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r146802 | tilghman | 2008-10-06 16:09:05 -0500 (Mon, 06 Oct 2008) | 15 lines
Merged revisions 146799 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r146799 | tilghman | 2008-10-06 15:52:04 -0500 (Mon, 06 Oct 2008) | 8 lines
Dialplan functions should not actually return 0, unless they have modified the
workspace. To signal an error (and no change to the workspace), -1 should be
returned instead.
(closes issue #13340)
Reported by: kryptolus
Patches:
20080827__bug13340__2.diff.txt uploaded by Corydon76 (license 14)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@146838 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r144569 | murf | 2008-09-25 16:21:28 -0600 (Thu, 25 Sep 2008) | 14 lines
(closes issue #13557)
Reported by: nickpeirson
The user attached a patch, but the license is not yet
recorded. I took the liberty of finding and replacing
ALL index() calls with strchr() calls, and that
involves more than just main/pbx.c;
chan_oss, app_playback, func_cut also had calls
to index(), and I changed them out. 1.4 had no
references to index() at all.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@144578 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r142676 | murf | 2008-09-11 22:50:48 -0600 (Thu, 11 Sep 2008) | 40 lines
Merged revisions 142675 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r142675 | murf | 2008-09-11 22:29:34 -0600 (Thu, 11 Sep 2008) | 29 lines
Tested by: sergee, murf, chris-mac, andrew, KNK
This is a "second attempt" to restore the previous "endbeforeh" behavior
in 1.4 and up. In order to capture information concerning all the
legs of transfers in all their infinite combinations, I was forced
to this particular solution by a chain of logical necessities, the
first being that I was not allowed to rewrite the CDR mechanism from
the ground up!
This change basically leaves the original machinery alone, which allows
IVR and local channel type situations to generate CDR's as normal, but
a channel flag can be set to suppress the normal running of the h exten.
That flag would be set by the code that runs the h exten from the
ast_bridge_call routine, to prevent the h exten from being run twice.
Also, a flag in the ast_bridge_config struct passed into ast_bridge_call
can be used to suppress the running of the h exten in that routine. This
would happen, for instance, if you use the 'g' option in the Dial app.
Running this routine 'early' allows not only the CDR() func to be used
in the h extension for reading CDR variables, but also allows them to
be modified before the CDR is posted to the backends.
While I dearly hope that this patch overcomes all problems, and
introduces no new problems, reality suggests that surely someone
will have problems. In this case, please re-open 13251 (or 13289),
and we'll see if we can't fix any remaining issues.
** trunk note: some code to suppress the h exten being run
from app_queue was added; for the 'continue' option available
only in trunk/1.6.x.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@142678 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r141998 | mmichelson | 2008-09-09 07:32:38 -0500 (Tue, 09 Sep 2008) | 7 lines
Use ast_debug for debug messages. I was wondering why debug
messages weren't showing up when I had set the debug level
high for just app_queue.c. It's because we were only checking
the global option_debug variable instead of using the awesome
macro which checks both the global and file-specific value
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@142001 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r140489 | mmichelson | 2008-08-29 12:47:17 -0500 (Fri, 29 Aug 2008) | 30 lines
Merged revisions 140488 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r140488 | mmichelson | 2008-08-29 12:34:17 -0500 (Fri, 29 Aug 2008) | 22 lines
After working on the ao2_containers branch, I noticed
something a bit strange. In all cases where we provide
a callback function to ao2_container_alloc, the callback
function would only return 0 or CMP_MATCH. After inspecting
the ao2_callback() code carefully, I found that if you're
only looking for one specific item, then you should return
CMP_MATCH | CMP_STOP. Otherwise, astobj2 will continue
traversing the current bucket until the end searching for
more matches.
In cases like chan_iax2 where in 1.4, all the peers are
shoved into a single bucket, this makes for potentially
terrible performance since the entire bucket will be
traversed even if the peer is one of the first ones come
across in the bucket.
All the changes I have made were for cases where the
callback function defined was passed to ao2_container_alloc
so that calls to ao2_find could find a unique instance
of whatever object was being stored in the container.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@140490 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r140422 | mmichelson | 2008-08-29 11:06:09 -0500 (Fri, 29 Aug 2008) | 20 lines
Merged revisions 140421 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r140421 | mmichelson | 2008-08-29 11:01:07 -0500 (Fri, 29 Aug 2008) | 12 lines
Add context checking when retrieving a vm_state.
This was causing a problem for people who had identically
named mailboxes in separate voicemail contexts.
This commit affects IMAP storage only.
(closes issue #13194)
Reported by: moliveras
Patches:
13194.patch uploaded by putnopvut (license 60)
Tested by: putnopvut, moliveras
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@140425 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r139627 | murf | 2008-08-22 16:03:13 -0600 (Fri, 22 Aug 2008) | 59 lines
Merged revisions 139347 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r139347 | murf | 2008-08-21 17:03:50 -0600 (Thu, 21 Aug 2008) | 47 lines
(closes issue #13251)
Reported by: sergee
Tested by: murf
THis is a bold move for a static release fix, but I wouldn't have
made it if I didn't feel confident (at least a *bit* confident)
that it wouldn't mess everyone up.
The reasoning goes something like this:
1. We simply cannot do anything with CDR's at the current point
(in pbx.c, after the __ast_pbx_run loop). It's way too late to
have any affect on the CDRs. The CDR is already posted and gone,
and the remnants have been cleared.
2. I was very much afraid that moving the running of the 'h'
extension down into the bridge code (where it would be now
practical to do it), would result in a lot more calls to the
'h' exten, so I implemented it as another exten under another
name, but found, to my pleasant surprise, that there was a
1:1 correspondence to the running of the 'h' exten in the
pbx_run loop, and the new spot at the end of the bridge.
So, I ifdef'd out the current 'h' loop, and moved it into
the bridge code. The only difference I can see is the stuff
about the AST_PBX_KEEPALIVE, and hopefully, if this
is still an important decision point, I can replicate it
if there are complaints. To be perfectly honest,
the KEEPALIVE situation is not totally clear to me,
and how it relates to a post-bridge situation is less
clear. I suspect the users will point out everything
in total clarity if this steps on anyone's toes!
3. I temporarily swap the bridge_cdr into the channel
before running the 'h' exten, which makes it possible
for users to edit the cdr before it goes out the door.
And, of course, with the endbeforehexten config var set,
the users can also get at the billsec/duration vals.
After the h exten finishes, the cdr is swapped back
and processing continues as normal.
Please, all who deal with CDR's, please test this version
of Asterisk, and file bug reports as appropriate!
........
I also made a little fix to the app_dial's 'e' option,
that is related to my updates.
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@139629 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r139215 | russell | 2008-08-20 17:16:36 -0500 (Wed, 20 Aug 2008) | 19 lines
Merged revisions 139213 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r139213 | russell | 2008-08-20 17:14:35 -0500 (Wed, 20 Aug 2008) | 11 lines
Fix a crash in the ChanSpy application. The issue here is that if you call
ChanSpy and specify a spy group, and sit in the application long enough looping
through the channel list, you will eventually run out of stack space and the
application with exit with a seg fault. The backtrace was always inside of
a harmless snprintf() call, so it was tricky to track down. However, it turned
out that the call to snprintf() was just the biggest stack consumer in this
code path, so it would always be the first one to hit the boundary.
(closes issue #13338)
Reported by: ruddy
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@139217 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r138887 | mmichelson | 2008-08-19 13:52:04 -0500 (Tue, 19 Aug 2008) | 31 lines
Merged revisions 138886 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r138886 | mmichelson | 2008-08-19 13:50:53 -0500 (Tue, 19 Aug 2008) | 23 lines
Add a lock and unlock prior to the destruction of the chanspy_ds
lock to ensure that no other threads still have it locked. While
this should not happen under normal circumstances, it appears that
if the spyer and spyee hang up at nearly the same time, the following
may occur.
1. ast_channel_free is called on the spyee's channel.
2. The chanspy datastore is removed from the spyee's channel in
ast_channel_free.
3. In the spyer's thread, the spyer attempts to remove and destroy the datastore
from the spyee channel, but the datastore has already been removed in step 2,
so the spyer continues in the code.
4. The spyee's thread continues and calls the datastore's destroy callback,
chanspy_ds_destroy. This involves locking the chanspy_ds.
5. Now the spyer attempts to destroy the chanspy_ds lock. The problem is that in step 4,
the spyee has locked this lock, meaning that the spyer is attempting to destroy a lock
which is currently locked by another thread.
The backtrace provided in issue #12969 supports the idea that this is possible
(and has even occurred). This commit does not close the issue, but should help
in preventing one type of crash associated with the use of app_chanspy.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@138888 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r138687 | mmichelson | 2008-08-18 15:04:10 -0500 (Mon, 18 Aug 2008) | 18 lines
Merged revisions 138685 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r138685 | mmichelson | 2008-08-18 15:01:14 -0500 (Mon, 18 Aug 2008) | 10 lines
Change the inequalities used in app_queue with regards
to timeouts from being strict to non-strict for more
accuracy.
(closes issue #13239)
Reported by: atis
Patches:
app_queue_timeouts_v2.patch uploaded by atis (license 242)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@138689 65c4cc65-6c06-0410-ace0-fbb531ad65f3
trunk.
For an explanation of what "imap_consistency" is,
please see svn revision 134223 to the 1.4 branch.
Coincidentally, this also fixes a recent bug report
regarding the inability to save messages to the new
folder when using IMAP storage since they will would
be flagged as "seen" and not be recognized as new
messages.
(closes issue #13234)
Reported by: jaroth
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@136715 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r135799 | murf | 2008-08-05 17:13:20 -0600 (Tue, 05 Aug 2008) | 34 lines
(closes issue #12982)
Reported by: bcnit
Tested by: murf
I discovered that also, in the previous bug fixes and changes,
the cdr.conf 'unanswered' option is not being obeyed, so
I fixed this.
And, yes, there are two 'answer' times involved in this
scenario, and I would agree with you, that the first
answer time is the time that should appear in the CDR.
(the second 'answer' time is the time that the bridge
was begun).
I made the necessary adjustments, recording the first
answer time into the peer cdr, and then using that to
override the bridge cdr's value.
To get the 'unanswered' CDRs to appear, I purposely
output them, using the dial cmd to mark them as
DIALED (with a new flag), and outputting them if
they bear that flag, and you are in the right mode.
I also corrected one small mention of the Zap device
to equally consider the dahdi device.
I heavily tested 10-sec-wait macros in dial, and
without the macro call; I tested hangups while the
macro was running vs. letting the macro complete
and the bridge form. Looks OK. Removed all the
instrumentation and debug.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@135821 65c4cc65-6c06-0410-ace0-fbb531ad65f3
such as "Work" and "Family" would be subfolders of the
INBOX. This is an invalid assumption to make, but it could
be desirable to set up folders in this manner, so a new
option for voicemail.conf, "imapparentfolder" has been
added to allow for this.
(closes issue #13142)
Reported by: jaroth
Patches:
parentfolder.patch uploaded by jaroth (license 50)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@135067 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r134758 | mmichelson | 2008-07-31 10:56:18 -0500 (Thu, 31 Jul 2008) | 16 lines
Add more timeout checks into app_queue, specifically
targeting areas where an unknown and potentially
long time has just elapsed. Also added a check
to try_calling() to return early if the timeout
has elapsed instead of potentially setting a negative
timeout for the call (thus making it have *no* timeout
at all).
(closes issue #13186)
Reported by: miquel_cabrespina
Patches:
13186.diff uploaded by putnopvut (license 60)
Tested by: miquel_cabrespina
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@134759 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r133169 | mmichelson | 2008-07-23 14:39:47 -0500 (Wed, 23 Jul 2008) | 12 lines
As suggested by seanbright, the PSEUDO_CHAN_LEN in
app_chanspy should be set at load time, not at compile
time, since dahdi_chan_name is determined at load time.
Also changed the next_unique_id_to_use to have the
static qualifier.
Also added the dahdi_chan_name_len variable so that
strlen(dahdi_chan_name) isn't necessary. Thanks to
seanbright for the suggestion.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@133171 65c4cc65-6c06-0410-ace0-fbb531ad65f3
own repository, and must be installed like any other library for Asterisk to
use. The two modules that require it are codec_resample and app_jack.
To install libresample:
$ svn co http://svn.digium.com/svn/libresample/trunk libresample
$ cd libresample
$ ./configure
$ make
$ sudo make install
This code is currently in our own repository because the build system did not
include the appropriate targets for building a dynamic library or for installing
the library.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@132390 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Mark Michelson
Tilghman Lesher
Jeff Peeler
Sean Bright
Kevin P. Fleming
Terry Wilson
Steve Murphy
Jason Parker
Michiel van Baak
Russell Bryant
Brett Bryant