1005 Commits (e26bd15e7a79d21ba0963d8ce38ec43e4550e225)

Author	SHA1	Message	Date
Richard Mudgett	5823f279f3	chan_rtp: Backport changes from master. ... * Deprecate chan_multicast_rtp. Change-Id: Ib5a45e58c75ee8abd0b4f9575379b5321feb853e	10 years ago
zuul	54be8fd149	Merge "pjsip_distributor.c: Ignore messages until fully booted." into 13	10 years ago
zuul	c9b873add8	Merge "ari/resource_channels: Add 'formats' to channel create/originate" into 13	10 years ago
Richard Mudgett	993b769524	pjsip_distributor.c: Ignore messages until fully booted. ... We should not be processing any incoming messages until we are fully booted. We may not have dialplan or other needed configuration loaded yet. ASTERISK-26089 #close Reported by: Scott Griepentrog ASTERISK-26088 Reported by: Richard Mudgett Change-Id: I584aefb4f34b885a8927e1f13a2c64babd606264	10 years ago
Joshua Colp	321a9b128f	res_odbc: Implement a connection pool. ... Testing has shown that our usage of UnixODBC is problematic due to bugs within UnixODBC itself as well as the heavy weight cost of connecting and disconnecting database connections, even when pooling is enabled. For users of UnixODBC 2.3.1 and earlier crashes would occur due to insufficient protection of the disconnect operation. This was fixed in UnixODBC 2.3.2 and above. For users of UnixODBC 2.3.3 and higher a slow-down would occur under heavy database use due to repeated connection establishment. A regression is present where on each connection the database configuration is cached again, with the cache growing out of control. The connection pool implementation present in this change helps to mitigate these issues by reducing how much we connect and disconnect database connections. We also solve the issue of crashes under UnixODBC 2.3.1 by defaulting the maximum number of connections to 1, returning us to the previous working behavior. For users who may have a fixed version the maximum concurrent connection limit can be increased helping with performance. The connection pool works by keeping a list of active connections. If the connection limit has not been reached a new connection is established. If the connection limit has been reached then the request waits until a connection becomes available before continuing. ASTERISK-26074 #close ASTERISK-26054 #close Change-Id: I6774bf4bac49a0b30242c76a09c403d2e856ecff	10 years ago
zuul	93237209eb	Merge "core/dial: New channel variable FORWARDERNAME" into 13	10 years ago
George Joseph	c27c232057	ari/resource_channels: Add 'formats' to channel create/originate ... If you create a local channel and don't specify an originator channel to take capabilities from, we automatically add all audio formats to the new channel's capabilities. When we try to make the channel compatible with another, the "best format" functions pick the best format available, which in this case will be slin192. While this is great for preserving quality, it's the worst for performance and overkill for the vast majority of applications. In the absense of any other information, adding all formats is the correct thing to do and it's not always possible to supply an originator so a new parameter 'formats' has been added to the channel create/originate functions. It's just a comma separated list of formats to make availalble for the channel. Example: "ulaw,slin,slin16". 'formats' and 'originator' are mutually exclusive. To facilitate determination of format names, the format name has been added to "core show codecs". ASTERISK-26070 #close Change-Id: I091b23ecd41c1b4128d85028209772ee139f604b	10 years ago
Alexei Gradinari	2de58c6d01	core/dial: New channel variable FORWARDERNAME ... Added a new channel variable FORWARDERNAME which indicates which channel was responsible for a forwarding requests received on dial attempt. Fixed a bug in the app_queue: FORWARD_CONTEXT is not used. ASTERISK-26059 #close Change-Id: I34e93e8c1b5e17776a77b319703c48c8ca48e7b2	10 years ago
Joshua Colp	e3c9ad6382	Merge "res_pjsip: add "via_addr", "via_port", "call_id" to contact" into 13	10 years ago
Alexei Gradinari	230686f4ec	res_pjsip: add "via_addr", "via_port", "call_id" to contact ... As res_pjsip_nat rewrites contact's address, only the last Via header can contain the source address of registered endpoint. Also Call-Id header may contain the source address of registered endpoint. Added "via_addr", "via_port", "call_id" to contact. Added new fields ViaAddress, CallID to AMI event ContactStatus. ASTERISK-26011 Change-Id: I36bcc0bf422b3e0623680152d80486aeafe4c576	10 years ago
zuul	87fe6b1622	Merge "func_odbc: single database connection should be optional" into 13	10 years ago
Alexei Gradinari	cd89501d48	func_odbc: single database connection should be optional ... func_odbc was changed in Asterisk 13.9.0 to make func_odbc use a single database connection per DSN because of reported bug ASTERISK-25938 with MySQL/MariaDB LAST_INSERT_ID(). This is drawback in performance when func_odbc is used very often in dialplan. Single database connection should be optional. ASTERISK-26010 Change-Id: I57d990616c957dabf7597dea5d5c3148f459dfb6	10 years ago
Joshua Colp	3296d2d194	Merge "res_pjsip_empty_info: Respond to empty SIP INFO packets" into 13	10 years ago
Joshua Colp	4e4a991d90	Merge "res_pjsip: Endpoint IP Access Controls" into 13	10 years ago
snuffy	39fedfa423	res_pjsip_empty_info: Respond to empty SIP INFO packets ... Some SBCs require responses to empty SIP INFO packets after establishing call via INVITE, if not responded to they may drop your call after unspecified timeout of X minutes. They are identified by having no Content-Type, check for this and respond with 200 - OK message. ASTERISK-24986 #close Reported-by: Ilya Trikoz, Federico Santulli Change-Id: Ib27e4f07151e5aef28fa587e4ead36c5b87c43e0	10 years ago
Alexei Gradinari	524a302974	res_pjsip: Endpoint IP Access Controls ... With the old SIP module we can use IP access controls per peer. PJSIP module missing this feature. This patch added next configuration Endpoint options: "acl" - list of IP ACL section names in acl.conf "deny" - List of IP addresses to deny access from "permit" - List of IP addresses to permit access from "contact_acl" - List of Contact ACL section names in acl.conf "contact_deny" - List of Contact header addresses to deny "contact_permit" - List of Contact header addresses to permit This patch also better logging failed request: add custom message instead of "No matching endpoint found" add SIP method to logging ASTERISK-25900 Change-Id: I456dea3909d929d413864fb347d28578415ebf02	10 years ago
Matt Jordan	89ae4466ea	res_hep: Provide an option to pick the UUID type ... At one point in time, it seemed like a good idea to use the Asterisk channel name as the HEP correlation UUID. In particular, it felt like this would be a useful identifier to tie PJSIP messages and RTCP messages together, along with whatever other data we may eventually send to Homer. This also had the benefit of keeping the correlation UUID channel technology agnostic. In practice, it isn't as useful as hoped, for two reasons: 1) The first INVITE request received doesn't have a channel. As a result, there is always an 'odd message out', leading it to be potentially uncorrelated in Homer. 2) Other systems sending capture packets (Kamailio) use the SIP Call-ID. This causes RTCP information to be uncorrelated to the SIP message traffic seen by those capture nodes. In order to support both (in case someone is trying to use res_hep_rtcp with a non-PJSIP channel), this patch adds a new option, uuid_type, with two valid values - 'call-id' and 'channel'. The uuid_type option is used by a module to determine the preferred UUID type. When available, that source of a correlation UUID is used; when not, the more readily available source is used. For res_hep_pjsip: - uuid_type = call-id: the module uses the SIP Call-ID header value - uuid_type = channel: the module uses the channel name if available, falling back to SIP Call-ID if not For res_hep_rtcp: - uuid_type = call-id: the module uses the SIP Call-ID header if the channel type is PJSIP and we have a channel, falling back to the Stasis event provided channel name if not - uuid_type = channel: the module uses the channel name ASTERISK-25352 #close Change-Id: Ide67e59a52d9c806e3cc0a797ea1a4b88a00122c	10 years ago
Jaco Kroon	2db17a793c	app_confbridge: Add a regcontext option for confbridge bridge profiles. ... This patch allows for having app_confbridge register the name of the conference as an extension into a specific context, similar to regcontext for chan_sip. This variant is not quite as involved as the one in chan_sip and doesn't allow for multiple contexts or custom extensions, you can only specify the context and the conference name will always be used as the extension to register. ASTERISK-25989 #close Change-Id: Icacf94d9f2b5dfd31ef36f6cb702392619a7902f	10 years ago
zuul	168a7b3dd8	Merge "res_fax: add FAXMODE variable" into 13	10 years ago
Alexei Gradinari	7a14e669f0	res_pjsip/AMI: add contact.updated event ... With the old SIP module AMI sends PeerStatus event on every successfully REGISTER requests, ie, on start registration, update registration and stop registration. With PJSIP AMI sends ContactStatus only when status is changed. Regarding registration: on start registration - Created on stop registration - Removed but on update registration nothing This patch added contact.updated event. ASTERISK-25904 Change-Id: I8fad8aae9305481469c38d2146e1ba3a56d3108f	10 years ago
Alexei Gradinari	06d4ac0355	res_fax: add FAXMODE variable ... The app_fax set FAXMODE variable, but res_fax missing this feature. This patch add FAXMODE variable which is set to either "audio" or "T38". ASTERISK-25980 Change-Id: Ie3dcbfb72cc681e9e267a60202f7fb8723a51b6b	10 years ago
Alexei Gradinari	3cb8934de0	pjsip: Added "reg_server" to contacts. ... If the Asterisk system name is set in asterisk.conf, it will be stored into the "reg_server" field in the ps_contacts table to facilitate multi-server setups. ASTERISK-25931 Change-Id: Ia8f6bd2267809c78753b52bcf21835b9b59f4cb8	10 years ago
George Joseph	38bed4515d	res_pjsip: Add ability to identify by Authorization username ... A feature of chan_sip that service providers relied upon was the ability to identify by the Authorization username. This is most often used when customers have a PBX that needs to register rather than identify by IP address. From my own experiance, this is pretty common with small businesses who otherwise don't need a static IP. In this scenario, a register from the customer's PBX may succeed because From will usually contain the PBXs account id but an INVITE will contain the caller id. With nothing recognizable in From, the service provider's Asterisk can never match to an endpoint and the INVITE just stays unauthorized. The fixes: A new value "auth_username" has been added to endpoint/identify_by that will use the username and digest fields in the Authorization header instead of username and domain in the the From header to match an endpoint, or the To header to match an aor. This code as added to res_pjsip_endpoint_identifier_user rather than creating a new module. Although identify_by was always a comma-separated list, there was only 1 choice so order wasn't preserved. So to keep the order, a vector was added to the end of ast_sip_endpoint. This is only used by res_pjsip_registrar to find the aor. The res_pjsip_endpoint_identifier_* modules are called in globals/endpoint_identifier_order. Along the way, the logic in res_pjsip_registrar was corrected to match most-specific to least-specific as res_pjsip_endpoint_identifier_user does. The order is: username@domain username@domain_alias username Auth by username does present 1 problem however, the first INVITE won't have an Authorization header so the distributor, not finding a match on anything, sends a securty_alert. It still sends a 401 with a challenge so the next INVITE will have the Authorization header and presumably succeed. As a result though, that first security alert is actually a false alarm. To address this, a new feature has been added to pjsip_distributor that keeps track of unidentified requests and only sends the security alert if a configurable number of unidentified requests come from the same IP in a configurable amout of time. Those configuration options have been added to the global config object. This feature is only used when auth_username is enabled. Finally, default_realm was added to the globals object to replace the hard coded "asterisk" used when an endpoint is not yet identified. The testsuite tests all pass but new tests are forthcoming for this new feature. ASTERISK-25835 #close Reported-by: Ross Beer Change-Id: I30ba62d208e6f63439600916fcd1c08a365ed69d	10 years ago
Alexei Gradinari	df3639700a	res_pjsip: disable multi domain to improve realtime performace ... This patch added new global pjsip option 'disable_multi_domain'. Disabling Multi Domain can improve Realtime performance by reducing number of database requests. ASTERISK-25930 #close Change-Id: I2e7160f3aae68475d52742107949a799aa2c7dc7	10 years ago
Alexei Gradinari	fd601f26f7	res_pjsip_outbound_publish: Add transport for outbound PUBLISH ... The first available transport of the appropriate type is used now. This patch adds new config option 'transport' for outbound-publish. If transport is set then outbound PUBLISH requests will use this transport. ASTERISK-25901 #close Change-Id: Ib389130489b70e36795b0003fa5fd386e2680151	10 years ago
George Joseph	c7eb18d865	chan_pjsip: Add 'pjsip show channelstats' ... Added the ability to show channel statistics to chan_pjsip (cli_functions.c) Moved the existing 'pjsip show channel(s)' functionality from pjsip_configuration to cli_functions.c. The stats needed chan_pjsip's private header so it made sense to move the existing channel commands as well. Now using stasis_cache_dump to get the channel snapshots rather than retrieving all endpoints, then getting each one's channel snapshots. Much more efficient. Change-Id: I03b114522126d27434030b285bf6d531ddd79869	10 years ago
George Joseph	27f32cd0a6	res_pjsip_caller_id: Anonymize 'From' when caller id presentation is prohibited ... Per RFC3325, the 'From' header is now anonymized on outgoing calls when caller id presentation is prohibited. TID = trust_id_outbound PRO = Set(CALLERID(pres)=prohib) USR = endpoint/from_user DOM = endpoint/from_domain PAI = YES(privacy=off), NO(not sent), PRI(privacy=full) (assumes send_pai=yes) Conditions |Result --------------------|---------------------------------------------------- TID PRO USR DOM |PAI FROM --------------------|---------------------------------------------------- Y Y abc def.ghi |PRI "Anonymous" <sip:abc@def.ghi> Y Y abc |PRI "Anonymous" <sip:abc@anonymous.invalid> Y Y def.ghi |PRI "Anonymous" <sip:anonymous@def.ghi> Y Y |PRI "Anonymous" <sip:anonymous@anonymous.invalid> Y N abc def.ghi |YES <sip:abc@def.ghi> Y N abc |YES <sip:abc@<ip_address>> Y N def.ghi |YES "Caller Name" <sip:<caller_exten>@def.ghi> Y N |YES "Caller Name" <sip:<caller_exten>@<ip_address>> N Y abc def.ghi |NO "Anonymous" <sip:abc@def.ghi> N Y abc |NO "Anonymous" <sip:abc@anonymous.invalid> N Y def.ghi |NO "Anonymous" <sip:anonymous@def.ghi> N Y |NO "Anonymous" <sip:anonymous@anonymous.invalid> N N abc def.ghi |YES <sip:abc@def.ghi> N N abc |YES <sip:abc@<ip_address>> N N def.ghi |YES "Caller Name" <sip:<caller_exten>@def.ghi> N N |YES "Caller Name" <sip:<caller_exten>@<ip_address>> ASTERISK-25791 #close Reported-by: Anthony Messina Change-Id: I2c82a5ca1413c2c00fb62ea95b0ae8e97af54dc9	10 years ago
zuul	9e896540c8	Merge "build-system: Allow building with static pjproject" into 13	10 years ago
Richard Mudgett	4165ea7778	SIP diversion: Fix REDIRECTING(reason) value inconsistencies. ... Previous chan_sip behavior: Before this patch chan_sip would always strip any quotes from an incoming reason and pass that value up as the REDIRECTING(reason). For an outgoing reason value, chan_sip would check the value against known values and quote any it didn't recognize. Incoming 480 response message reason text was just assigned to the REDIRECTING(reason). Previous chan_pjsip behavior: Before this patch chan_pjsip would always pass the incoming reason value up as the REDIRECTING(reason). For an outgoing reason value, chan_pjsip would send the reason value as passed down. With this patch: Both channel drivers match incoming reason values with values documented by REDIRECTING(reason) and values documented by RFC5806 regardless of whether they are quoted or not. RFC5806 values are mapped to the equivalent REDIRECTING(reason) documented value and is set in REDIRECTING(reason). e.g., an incoming RFC5806 'unconditional' value or a quoted string version ('"unconditional"') is converted to REDIRECTING(reason)'s 'cfu' value. The user's dialplan only needs to deal with 'cfu' instead of any of the aliases. The incoming 480 response reason text supported by chan_sip checks for known reason values and if not matched then puts quotes around the reason string and assigns that to REDIRECTING(reason). Both channel drivers send outgoing known REDIRECTING(reason) values as the unquoted RFC5806 equivalent. User custom values are either sent as is or with added quotes if SIP doesn't allow a character within the value as part of a RFC3261 Section 25.1 token. Note that there are still limitations on what characters can be put in a custom user value. e.g., embedding quotes in the middle of the reason string is silly and just going to cause you grief. * Setting a REDIRECTING(reason) value now recognizes RFC5806 aliases. e.g., Setting REDIRECTING(reason) to 'unconditional' is converted to the 'cfu' value. * Added missing malloc() NULL return check in res_pjsip_diversion.c set_redirecting_reason(). * Fixed potential read from a stale pointer in res_pjsip_diversion.c add_diversion_header(). The reason string needed to be copied into the tdata memory pool to ensure that the string would always be available. Otherwise, if the reason string returned by reason_code_to_str() was a user's reason string then the string could be freed later by another thread. Change-Id: Ifba83d23a195a9f64d55b9c681d2e62476b68a87	10 years ago
George Joseph	b59956a875	build-system: Allow building with static pjproject ... Background here: http://lists.digium.com/pipermail/asterisk-dev/2016-January/075266.html From CHANGES: * To help insure that Asterisk is compiled and run with the same known version of pjproject, a new option (--with-pjproject-bundled) has been added to ./configure. When specified, the version of pjproject specified in third-party/versions.mak will be downloaded and configured. When you make Asterisk, the build process will also automatically build pjproject and Asterisk will be statically linked to it. Once a particular version of pjproject is configured and built, it won't be configured or built again unless you run a 'make distclean'. To facilitate testing, when 'make install' is run, the pjsua and pjsystest utilities and the pjproject python bindings will be installed in ASTDATADIR/third-party/pjproject. The default behavior remains building with the shared pjproject installation, if any. Building: All you have to do is include the --with-pjproject-bundled option on the ./configure command line (and remove any existing --with-pjproject option if specified). Everything else is automatic. Behind the scenes: The top-level Makefile was modified to include 'third-party' in the list of MOD_SUBDIRS. The third-party directory was created to contain any third party packages that may be needed in the future. Its Makefile automatically iterates over any subdirectories passing on targets. The third-party/pjproject directory was created to house the pjproject source distribution. Its Makefile contains targets to download, patch configure, generate dependencies, compile libs, apps and python bindings, sanitized build.mak and generate a symbols list. When bootstrap.sh is run, it automatically includes the configure.m4 file in third-party/pjproject. This file has a macro to download and conifgure pjproject and get and set PJPROJECT_INCLUDE, PJPROJECT_DIR and PJPROJECT_BUNDLED. It also tests for the capabilities like PJ_TRANSACTION_GRP_LOCK by parsing preprocessor output as opposed to trying to compile. Of course, bootstrap.sh is only run once and the configure file is incldued in the patch. When configure is run with the new options, the macro in configure.m4 triggers the download, patch, conifgure and tests. No compilation is performed at this time. The downloaded tarball is cached in /tmp so it doesn't get downloaded again on a distclean. When make is run in the top-level Asterisk source directory, it will automatically descend all the subdirectories in third_party just as it does for addons, apps, etc. The top-level Makefile makes sure that the 'third-party' is built before 'main' so that dependencies from the other directories are built first. When main does build, a new shared library (libasteriskpj) is created that links statically to the pjproject .a files and exports all their symbols. The asterisk binary links to that, just as it does with libasteriskssl. When Asterisk is installed, the pjsua and pjsystest apps, and the pjproject python bindings are installed in ASTDATADIR/third-party/pjproject. This will facilitate testing, including running the testsuite which will be updated to check that directory for the pjsua module ahead of the system python library. Modules should continue to depend on pjproject if they use pjproject APIs directly. They should not care about the implementation. No changes to any res_pjsip modules were made. Change-Id: Ia7a60c28c2e9ba9537c5570f933c1ebcb20a3103	10 years ago
zuul	d35c494df1	Merge "res_pjsip/config_transport: Allow reloading transports." into 13	10 years ago
zuul	aa637f0a91	Merge "res_pjsip_config_wizard: Add command to export primitive objects" into 13	10 years ago
George Joseph	d2a1457e0b	res_pjsip/config_transport: Allow reloading transports. ... The 'reload' mechanism actually involves closing the underlying socket and calling the appropriate udp, tcp or tls start functions again. Only outbound_registration, pubsub and session needed work to reset the transport before sending requests to insure that the pjsip transport didn't get pulled out from under them. In my testing, no calls were dropped when a transport was changed for any of the 3 transport types even if ip addresses or ports were changed. To be on the safe side however, a new transport option was added (allow_reload) which defaults to 'no'. Unless it's explicitly set to 'yes' for a transport, changes to that transport will be ignored on a reload of res_pjsip. This should preserve the current behavior. Change-Id: I5e759850e25958117d4c02f62ceb7244d7ec9edf	10 years ago
George Joseph	6b921f706d	res_pjproject: Add ability to map pjproject log levels to Asterisk log levels ... Warnings and errors in the pjproject libraries are generally handled by Asterisk. In many cases, Asterisk wouldn't even consider them to be warnings or errors so the messages emitted by pjproject directly are either superfluous or misleading. A good exampe of this are the level-0 errors pjproject emits when it can't open a TCP/TLS socket to a client to send an OPTIONS. We don't consider a failure to qualify a UDP client an "ERROR", why should a TCP/TLS client be treated any differently? A config file for res_pjproject has bene added (pjproject.conf) and a new log_mappings object allows mapping pjproject levels to Asterisk levels (or nothing). The defaults if no pjproject.conf file is found are the same as those that were hard-coded into res_pjproject initially: 0,1 = LOG_ERROR, 2 = LOG_WARNING, 3,4,5 = LOG_DEBUG<level> Change-Id: Iba7bb349c70397586889b8f45b8c3d6c6c8c3898	10 years ago
George Joseph	5e848dae7b	res_pjsip_config_wizard: Add command to export primitive objects ... A new command (pjsip export config_wizard primitives) has been added that will export all the pjsip objects it created to the console or a file suitable for reuse in a pjsip.conf file. ASTERISK-24919 #close Reported-by: Ray Crumrine Change-Id: Ica2a5f494244b4f8345b0437b16d06aa0484452b	10 years ago
Joshua Colp	2177dbea50	Merge topic 'ASTERISK-20987' into 13 ... * changes: app_confbridge: Add ability to get the muted conference state. app_confbridge.c: Update CONFBRIDGE and CONFBRIDGE_INFO documentation. app_confbridge: Make non-admin users join a muted conference muted.	10 years ago
Sean Bright	4e8e6d3922	res_rtp_asterisk: Allow ICE host candidates to be overriden ... During ICE negotiation the IPs of the local interfaces are sent to the remote peer as host candidates. In many cases Asterisk is behind a static one-to-one NAT, so these host addresses will be internal IP addresses. To help in hiding the topology of the internal network, this patch adds the ability to override the host candidates by matching them against a user-defined list of replacements. Change-Id: I1c9541af97b83a4c690c8150d19bf7202c8bff1f	10 years ago
Richard Mudgett	1d0abf86e7	app_confbridge: Add ability to get the muted conference state. ... * Added CONFBRIDGE_INFO(muted,) for querying the muted conference state. * Added Muted header to AMI ConfbridgeListRooms action response list events to indicate the muted conference state. * Added Muted column to CLI "confbridge list" output to indicate the muted conference state and made the locked column a yes/no value instead of a locked/unlocked value. ASTERISK-20987 Reported by: hristo Change-Id: I4076bd8ea1c23a3afd4f5833e9291b49a0c448b1	10 years ago
George Joseph	137fe5ae01	res_pjproject: Add module providing pjproject logging and utils ... res_pjsip_log_forwarder has been renamed to res_pjproject and enhanced as follows: As a follow-on to the recent 'Add CLI "pjsip show buildopts"' patch, a new ast_pjproject_get_buildopt function has been added. It allows the caller to get the value of one of the buildopts. The initial use case is retrieving the runtime value of PJ_MAX_HOSTNAME to insure we don't send a hostname greater than pjproject can handle. Since it can differ between the version of pjproject that Asterisk was compiled against and the version of pjproject that Asterisk is running against, we can't use the PJ_MAX_HOSTNAME macro directly in Asterisk source code. Change-Id: Iab6e82fec3d7cf00c1cf6185c42be3e7569dee1e	10 years ago
Joshua Colp	236896f391	Merge "pjsip: Add option global/regcontext" into 13	10 years ago
George Joseph	219c204a41	pjsip_sdp_rtp: Add option endpoint/bind_rtp_to_media_address ... On a system with multiple ip addresses in the same subnet, if a transport is bound to a specific ip address and endpoint/media_address is set, the SIP/SDP will have the correct address in all fields but the rtp stream MAY still originate from one of the other ip addresses, most probably the "primary" ip address. This happens because res_pjsip_sdp_rtp/create_rtp always calls ast_instance_new with the "all" ip address (0.0.0.0 or ::). The new option causes res_pjsip_sdp_rtp/create_rtp to call ast_rtp_instance_new with the endpoint's media_address (if specified) instead of the "all" address. This causes the packets to originate from the specified address. ASTERISK-25632 ASTERISK-25637 Reported-by: Olivier Krief Reported-by: Dan Journo Change-Id: I3dfaa079e54ba7fb7c4fd1f5f7bd9509bbf8bd88	10 years ago
Daniel Journo	22801a06ee	pjsip: Add option global/regcontext ... Added new global option (regcontext) to pjsip. When set, Asterisk will dynamically create and destroy a NoOp priority 1 extension for a given endpoint who registers or unregisters with us. ASTERISK-25670 #close Reported-by: Daniel Journo Change-Id: Ib1530c5b45340625805c057f8ff1fb240a43ea62	10 years ago
Rodrigo Ramírez Norambuena	e13719bff1	app_queue: Added reason pause of member ... In app_queue added value Paused Reason on QueueMemberStatus when a member on queue is paused and the reason was set. ASTERISK-25480 #close Reporte by: Rodrigo Ramírez Norambuena Change-Id: Ia5db503482f50764c15e2020196c785f59d4a68e	10 years ago
George Joseph	4ec85a9f07	voicemail: Move app_voicemail / res_mwi_external conflict to runtime ... The menuselect conflict between app_voicemail and res_mwi_external makes it hard to package 1 version of Asterisk. There no actual build dependencies between the 2 so moving this check to runtime seems like a better solution. The ast_vm_register and ast_vm_greeter_register functions in app.c were modified to return AST_MODULE_LOAD_DECLINE instead of -1 if there is already a voicemail module registered. The modules' load_module functions were then modified to return DECLINE instead of -1 to the loader. Since -1 is interpreted by the loader as AST_MODULE_LOAD_FAILURE, the modules were incorrectly causing Asterisk to stop so this needed to be cleaned up anyway. Now you can build both and use modules.conf to decide which voicemail implementation to load. The default menuselect options still build app_voicemail and not res_mwi_external but if both ARE built, res_mwi_external will load first and become the voicemail provider unless modules.conf rules prevent it. This is noted in CHANGES. Change-Id: I7d98d4e8a3b87b8df9e51c2608f0da6ddfb89247	10 years ago
Matt Jordan	dde7f3c1c4	res_pjsip_history: Add a module that provides PJSIP history for debugging ... This patch adds a new module, res_pjsip_history, that provides a slightly better way of debugging SIP message traffic on a busy Asterisk system. The existing mechanisms all rely on passively dumping a SIP message to the CLI. While this is perfectly fine for logging purposes and well controlled environments, on many installations, the amount of SIP messages Asterisk receives will quickly swamp the CLI. This makes it difficult to view/capture those messages that you want to diagnose in real time. This patch provides another way of handling this. When enabled, the module will store SIP message traffic in memory. This traffic can then be queried at leisure. In order to make the querying useful, a CLI command has been implemented, 'pjsip show history', that supports a basic expression syntax similar to SQL or other query languages. A small number of useful fields have been added in this initial patch; additional fields can easily be added in later improvements. Those fields are: - number: The entry index in the history - timestamp: The time the message was recieved - addr: The source/destination address of the message - sip.msg.request.method: The request method - sip.msg.call-id: The Call-ID header Note - this is a resurrection of the module initially proposed on Review Board here: https://reviewboard.asterisk.org/r/4053/ Change-Id: I39bd74ce998e99ad5ebc0aab3e84df3a150f8e36	10 years ago
Joshua Colp	59d5bb0613	res_sorcery_memory_cache: Add support for a full backend cache. ... This change introduces the configuration option 'full_backend_cache' which changes the cache to be a full mirror of the backend instead of a per-object cache. This allows all sorcery retrieval operations to be carried out against it and is useful for object types which are used in a "retrieve all" or "retrieve some" pattern. ASTERISK-25625 #close Change-Id: Ie2993487e9c19de563413ad5561c7403b48caab5	10 years ago
Matt Jordan	529535f0c2	Revert "bridges/bridge_t38: Add a bridging module for managing T.38 state" ... This reverts commit 6614babea2. Unfortunately, using a bridge to manage T.38 state will cause severe deadlocks in core_unreal/chan_local. Local channels attempt to reach across both their peer and the peer's bridge to inspect T.38 state. Given the propensity of Local channel chains, managing the locking situation in such a scenario is practically infeasible. Change-Id: Ic687397ffea08dfb899345a443bd990ec3d0416a	10 years ago
Alexander Traud	5a18193dc0	res_format_attr_vp8: In SDP, forward max-fr and max-fs for video-codec VP8. ... ASTERISK-25584 #close Change-Id: Iae00071b4ff1ae76f24995aeac4d00284fd14f91	10 years ago
Matt Jordan	6614babea2	bridges/bridge_t38: Add a bridging module for managing T.38 state ... When 4875e5ac32 was merged, it fixed several issues with a direct media bridge transitioning to handling a T.38 fax. However, it uncovered a race condition caused by the bridging core. When a channel involved in a T.38 fax leaves a bridge, the frame queued by the channel driver that should inform the far side that it is no longer in a T.38 fax may not make it across the bridge. The bridging framework is *extremely* aggressive in tearing down the bridge, and control frames that are currently in flight *may* get dropped. This patch adds a new module to the bridging framework, bridge_t38. This module maintains some notion of the T.38 state for the two channels in a bridge. When the bridge detects that it is being torn down or when one of the two channels leaves, it informs the respective channel(s) that they should stop faxing. This ensures that channels switch back to audio if they survive and are ejected out of a bridge while faxing. ASTERISK-25582 Change-Id: If5b0bb478eb01c4607c9f4a7fc17c7957d260ea0	10 years ago
Niklas Larsson	3fcf160fae	CHANGES: Fix a typo ... Change-Id: Iceb3d9bb78140c376174a7bee197dfcf8ef9cda7	10 years ago