Using the same auth section for inbound and outbound authentication is not
recommended. There is a difference in meaning for an empty realm setting
between inbound and outbound authentication uses.
An empty inbound auth realm represents the global section's default_realm
value when the authentication object is used to challenge an incoming
request. An empty outgoing auth realm is treated as a don't care wildcard
when the authentication object is used to respond to an incoming
authentication challenge.
ASTERISK-26799
Change-Id: Id3952f7cfa1b6683b9954f2c5d2352d2f11059ce
Original patch by John Covert, slight modifications by me.
ASTERISK-17428 #close
Reported by: John Covert
Patches:
app_voicemail.c.patch (license #5512) patch uploaded by
John Covert
Change-Id: Ic3361b0782e5a5397a19ab18eb8550923a9bd6a6
The entry for 'identify' was incorrectly placed in the
res_pjsip section when it should be in
res_pjsip_endpoint_identifier_ip.
ASTERISK-26785 #close
Change-Id: Ia1372b12a952bfe2df6b1b1e0e725ca306a5d41a
This change adds experimental support for providing RTCP
feedback information to codec modules so they can dynamically
change themselves based on conditions.
ASTERISK-26584
Change-Id: Ifd6aa77fb4a7ff546c6025900fc2baf332c31857
ast_loggrabber gathers log files from customizable search patterns,
optionally converts POSIX timestamps to a readable format and
tarballs the results.
Also a few tweaks were made to ast_coredumper.
Change-Id: I8bfe1468ada24c1344ce4abab7b002a59a659495
(cherry picked from commit c709152878)
This utility allows easy manipulation of asterisk coredumps.
* Configurable search paths and patterns for existing coredumps
* Can generate a consistent coredump from the running instance
* Can dump the lock_infos table from a coredump
* Dumps backtraces to separate files...
- thread apply 1 bt full -> <coredump>.thread1.txt
- thread apply all bt -> <coredump>.brief.txt
- thread apply all bt full -> <coredump>.full.txt
- lock_infos table -> <coredump>.locks.txt
* Can tarball corefiles and optionally delete them after processing
* Can tarball results files and optionally delete them after processing
* Converts ':' in coredump and results file names '-' to facilitate
uploading. Jira for instance, won't accept file names with colons
in them.
Tested on Fedora24+, Ubuntu14+, Debian6+, CentOS6+ and FreeBSD9+[1].
[1] For *BSDs, the "devel/gdb" package might have to be installed to
get a recent gdb. The utility will check all instances of gdb
it finds in $PATH and if one isn't found that can run python, it
prints a friendly error.
Change-Id: I935d37ab9db85ef923f32b05579897f0893d33cd
(cherry picked from commit cb47b45560)
Use of the new logging is as simple as issuing the new CLI command or
setting the new pjproject.conf option.
Other options that can affect the logging are how you have the pjproject
log levels mapped to Asterisk log types in pjproject.conf and if you have
configured Asterisk to log the DEBUG type messages. Altering the
pjproject.conf level mapping shouldn't be necessary for most installations
as the default mapping is sensible. Configuring Asterisk to log the DEBUG
message type is standard practice for collecting debug information.
* Added CLI "pjproject set log level" command to dynamically adjust the
maximum pjproject log message level.
* Added CLI "pjproject show log level" command to see the currently set
maximum pjproject log message level.
* Added pjproject.conf startup section "log_level" option to set the
initial maximum pjproject log message level so all messages could be
captured from initialization.
* Set PJ_LOG_MAX_LEVEL to 6 to compile in all defined logging levels into
bundled pjproject. Pjproject will use the currently set run time log
level to determine if a log message is generated just like Asterisk
verbose and debug logging levels.
* In log_forwarder(), made always log enabled and mapped pjproject log
messages. DEBUG mapped log messages are no longer gated by the current
Asterisk debug logging level.
* Removed RAII_VAR() from res_pjproject.c:get_log_level().
ASTERISK-26630 #close
Change-Id: I6dca12979f482ffb0450aaf58db0fe0f6d2e5389
This works the same as for AMI manager variables. Set
"channelvars=foo,bar" in your ari.conf general section, and then the
channel variables "foo" and "bar" (along with their values), will
appear in every Stasis websocket channel event.
ASTERISK-26492 #close
patches:
ari_vars.diff submitted by Mark Michelson
Change-Id: I5609ba239259577c0948645df776d7f3bc864229
Since adding all remaining rates of Signed Linear (ASTERISK-24274), SILK
(Gerrit 3136) and Codec 2 (ASTERISK-26217), no RTP Payload Type is left in the
dynamic range (96-127). RFC 3551 section 3 allows to reassign other ranges.
Consequently, when the dynamic range is exhausted, this change utilizes payload
types in the range between 35 and 63 giving room for another 29 payload types.
ASTERISK-26311 #close
Change-Id: I7bc96ab764bc30098a178b841cbf7146f9d64964
codecs.conf.sample was missing codec opus's configuration options, descriptions,
and examples. This patch adds the configuration options and examples to
codecs.conf.sample that can be used with codec_opus.
ASTERISK-26538 #close
Change-Id: I1d89bb5e01d3e3b5bd78951b8dd0ff077a83dc8b
Removing explicit transport definition for endpoints and registrations. It
isn't necessary and isn't generally advised.
ASTERISK-26514 #close
Change-Id: Ifdec5e631962438a4683600968dfa4bfd15909fb
Support for referring to DAHDI channels by logical names was added in
(FIXME: when? Asterisk 11? 1.8?) and was intended to be part of support
of refering to channels by name.
While technically usable, it has never been properly supported in
dahdi-tools, as using it would require many changes at the Asterisk
level. Instead logical mapping was added at the kernel level.
Thus it seems that refering to DAHDI channels by name is not really used
by anyone, and therefore should probably be removed.
Change-Id: I7d50bbfd9d957586f5cd06570244ef87bd54b485
When channel format changes occurred as a result of an RTP
re-negotiation the bridge was not informed this had happened.
As a result the bridge technology was not re-evaluated and the
channel may have been in a bridge technology that was incompatible
with its formats. The bridge is now unbridged and the technology
re-evaluated when this occurs.
The chan_pjsip module also allowed asymmetric codecs for sending
and receiving. This did not work with all devices and caused one
way audio problems. The default has been changed to NOT do this
but to match the sending codec to the receiving codec. For users
who want asymmetric codecs an option has been added, asymmetric_rtp_codec,
which will return chan_pjsip to the previous behavior.
The codecs returned by the chan_pjsip module when queried by
the bridge_native_rtp module were also not reflective of the
actual negotiated codecs. The nativeformats are now returned as
they reflect the actual negotiated codecs.
ASTERISK-26423 #close
Change-Id: I6ec88c6e3912f52c334f1a26983ccb8f267020dc
This change adds support for dual stack automatically. No
configuration is required and the IP address and version
in the SIP messages and SDP will be automatically changed
based on the transport over which the message is being
sent. RTP usage has also been changed to listen on both
IPv4 and IPv6 simultaneously to allow media to flow, and
to allow ICE support on both simultaneously. This also
allows failover between IPv6 and IPv4 to work as expected.
ASTERISK-26309 #close
Change-Id: I235a421d8f9a326606d861b449fa6fe3a030572d
Introduces ice_blacklist configuration in rtp.conf. Subnets listed in the
form ice_blacklist = <subnet spec>, e.g. ice_blacklist =
192.168.1.0/255.255.255.0, are excluded from ICE host, srflx and relay
discovery. This is useful for optimizing the ICE process where a system
has multiple host address ranges and/or physical interfaces and certain
of them are not expected to be used for RTP. Multiple ice_blacklist
configuration lines may be used. If left unconfigured, all discovered
host addresses are used, as per previous behavior.
Documention in rtp.conf.sample.
ASTERISK-26418 #close
Change-Id: Ibee88f80d7693874fda1cceaef94a03bd86012c9
We use a lot res_calendar, we are very happy with that, especially
because you use libical, the almost alone opensource library that
supports really ical format with all types of recurrency.
Nevertheless, some features are missed for our business use cases.
This first patch adds a new option in calendar.conf:
fetch_again_at_reload. Be my guest for a better name.
If it's true, when you'll launch "module reload res_calendar.so",
Asterisk will download again the calendar.
The business use case is that we have a WebUI with a scheduler planner,
we know when the calendars are modified.
For now, we need to define 1 minute of timeout to have a chance that
our user doesn't wait too long between the modification and the real
test. But it generates a lot of useless HTTP traffic.
ASTERISK-26422 #close
Change-Id: I384b02ebfa42b142bbbd5b7221458c7f4dee7077
The pooling, shared_connection, limit, and idlecheck options
are no longer used in res_odbc.
ASTERISK-26389
Change-Id: I2fde7b467d01f9d1c82cc0a339bb4f7e1dd6bbe6
* Make 'cdrzone=UTC' work properly.
* Fix the documentation of cdr_mysql.conf: it's cdrzone and not timezone
ASTERISK-26359 #close
Change-Id: I2a6f67b71bbbe77cac31a34d0bbfb1d67c933778
This implements the chan_sip legacy_useroption_parsing option but with a
better name.
* Made the caller-id number and redirecting number strings obtained from
incoming SIP URI user fields always truncated at the first semicolon.
People don't care about anything after the semicolon showing up on their
displays even though the RFC allows the semicolon.
ASTERISK-26316 #close
Reported by: Kevin Harwell
Change-Id: Ib42b0e940dd34d84c7b14bc2e90d1ba392624f62
This patch add config to pjsip by endpoint.
;preferred_codec_only=yes
; Respond to a SIP invite with the single most preferred codec
; rather than advertising all joint codec capabilities. This
; limits the other side's codec choice to exactly what we prefer.
ASTERISK-26317 #close
Reported by: AaronAn
Tested by: AaronAn
Change-Id: Iad04dc55055403bbf5ec050997aee2dadc4f0762
When 'tlsclientmethod' is not specified in sip.conf, chan_sip uses the OpenSSL
SSLv23_method. This was documented incorrectly in the file sip.conf.sample.
SSLv23_method got its name in the 90s. Today, with OpenSSL 1.0.2, this method
enables (just) the secure TLSv1.0 and TLSv1.2. Or stated differently, that
function should have been called 'secure_method' or 'automatic_method' back in
the 90s.
Consequently please, specify 'tlsclientmethod=tlsv1' in your sip.conf only if
you face a server which has problems like not falling back to TLSv1.0
automatically.
ASTERISK-24425
Change-Id: I502ce6146b4504cadfd3973af8d6ec3994f54fa3
contact_user, when specified on an endpoint, will override the user
portion of the Contact header on outgoing requests.
Change-Id: Icd4ebfda2f2e44d3ac749d0b4066630e988407d4
The Exchanging Device and Mailbox States could not working
if the Entity ID (EID) is not set manually and can't be obtained
from ethernet interface.
This patch replaces debug message to warning
and addes missing description about option 'entityid' to
asterisk.conf.sample.
With this patch the asterisk also:
(1) decline loading the modules which won't work without EID:
res_corosync and res_pjsip_publish_asterisk.
(2) warn if EID is empty on loading next modules:
pbx_dundi, res_xmpp
Starting with v197 systemd/udev will automatically assign "predictable"
names for all local Ethernet interfaces.
This patch also addes some new ethernet prefixes "eno" and "ens".
ASTERISK-26164 #close
Change-Id: I72d712f1ad5b6f64571bb179c5cb12461e7c58c6
The PJSIP taskprocessors could be overflowed on startup
if there are many (thousands) realtime endpoints
configured with unsolicited mwi.
The PJSIP stack could be totally unresponsive for a few minutes
after boot completed.
This patch creates a separate PJSIP serializers pool for mwi
and makes unsolicited mwi use serializers from this pool.
This patch also adds 2 new global options to tune taskprocessor
alert levels: 'mwi_tps_queue_high' and 'mwi_tps_queue_low'.
This patch also adds new global option 'mwi_disable_initial_unsolicited'
to disable sending unsolicited mwi to all endpoints on startup.
If disabled then unsolicited mwi will start processing
on next endpoint's contact update.
ASTERISK-26230 #close
Change-Id: I4c8ecb82c249eb887930980a800c9f87f28f861a
On heavy loaded system with IMAP or DB storage,
'app_voicemail' taskprocessor queue could reach 500 scheduled tasks.
It could happen when the IMAP or DB server dies or is unreachable.
It could happen on startup when there are many (thousands)
realtime endpoints configured with unsolicited mwi.
If the taskprocessor queue reaches the high water level
then the alert is triggered and pjsip stops processing new requests
until the queue reaches the low water level to clear the alert.
This patch adds 2 new 'general' configuration options
to tune taskprocessor alert levels:
'tps_queue_high' - Taskprocessor high water alert trigger level.
'tps_queue_low' - Taskprocessor low water clear alert level
ASTERISK-26229 #close
Change-Id: I766294fbffedf64053c0d9ac0bedd3109f043ee8
The new option allows the channel driver's faxdetect option to timeout on
a call after the specified number of seconds into a call. The new feature
is disabled if the timeout is set to zero. The option is disabled by
default.
* Don't clear dsp_features after passing them to the dsp code in
my_pri_ss7_open_media(). We should still remember them especially for the
new faxdetect_timeout option.
ASTERISK-26214
Reported by: Richard Mudgett
Change-Id: Ieffd3fe788788d56282844774365546dce8ac810
The new endpoint option allows the PJSIP channel driver's fax_detect
endpoint option to timeout on a call after the specified number of
seconds into a call. The new feature is disabled if the timeout is set
to zero. The option is disabled by default.
ASTERISK-26214
Reported by: Richard Mudgett
Change-Id: Id5a87375fb2c4f9dc1d4b44c78ec8735ba65453d
Following the principle of least surprise, we should not be sending
massive numbers of PJSIP and RTCP HEP packets out into the ether to some
only-slightly-random IP address. Having 'enabled' set to 'no' in the
sample configuration file should prevent this from happening for those
who run 'make samples'.
ASTERISK-26159 #close
Change-Id: I1753a64ca83a3442a6ebdc31061f8185c062d9b1
This patch removes the following modules:
- pbx_functions: It never existed.
- res_pjsip_log_forwarder: It no longer exists.
- res_hep_pjsip: The base HEP module wasn't loaded, and most basic PBXs
aren't going to be installing HOMER
- res_pjsip_phoneprov_provider: The basic res_phoneprov module isn't
loaded, and we aren't configured to make use of the
module
Change-Id: Id91f68cae7c9c8c3d370029fe1268cb51e4ff5a5
Testing has shown that our usage of UnixODBC is problematic
due to bugs within UnixODBC itself as well as the heavy weight
cost of connecting and disconnecting database connections, even
when pooling is enabled.
For users of UnixODBC 2.3.1 and earlier crashes would occur due
to insufficient protection of the disconnect operation. This was
fixed in UnixODBC 2.3.2 and above.
For users of UnixODBC 2.3.3 and higher a slow-down would occur
under heavy database use due to repeated connection establishment.
A regression is present where on each connection the database
configuration is cached again, with the cache growing out of
control.
The connection pool implementation present in this change helps
to mitigate these issues by reducing how much we connect and
disconnect database connections. We also solve the issue of
crashes under UnixODBC 2.3.1 by defaulting the maximum number of
connections to 1, returning us to the previous working behavior.
For users who may have a fixed version the maximum concurrent
connection limit can be increased helping with performance.
The connection pool works by keeping a list of active connections.
If the connection limit has not been reached a new connection is
established. If the connection limit has been reached then the
request waits until a connection becomes available before
continuing.
ASTERISK-26074 #close
ASTERISK-26054 #close
Change-Id: I6774bf4bac49a0b30242c76a09c403d2e856ecff
Add the option 'enable_callee_prompt' to followme.conf. Enabled by
default. If disabled, a callee is not prompted to accept or reject
the forwarded call.
ASTERISK-26064 #close
Change-Id: I0a8b19d4cf95c86a07c992813babb9e4a4acfff5
Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
func_odbc was changed in Asterisk 13.9.0
to make func_odbc use a single database connection per DSN
because of reported bug ASTERISK-25938
with MySQL/MariaDB LAST_INSERT_ID().
This is drawback in performance when func_odbc is used
very often in dialplan.
Single database connection should be optional.
ASTERISK-26010
Change-Id: I7091783a7150252de8eeb455115bd00514dfe843
At one point in time, it seemed like a good idea to use the Asterisk
channel name as the HEP correlation UUID. In particular, it felt like
this would be a useful identifier to tie PJSIP messages and RTCP
messages together, along with whatever other data we may eventually send
to Homer. This also had the benefit of keeping the correlation UUID
channel technology agnostic.
In practice, it isn't as useful as hoped, for two reasons:
1) The first INVITE request received doesn't have a channel. As a
result, there is always an 'odd message out', leading it to be
potentially uncorrelated in Homer.
2) Other systems sending capture packets (Kamailio) use the SIP Call-ID.
This causes RTCP information to be uncorrelated to the SIP message
traffic seen by those capture nodes.
In order to support both (in case someone is trying to use res_hep_rtcp
with a non-PJSIP channel), this patch adds a new option, uuid_type, with
two valid values - 'call-id' and 'channel'. The uuid_type option is used
by a module to determine the preferred UUID type. When available, that
source of a correlation UUID is used; when not, the more readily available
source is used.
For res_hep_pjsip:
- uuid_type = call-id: the module uses the SIP Call-ID header value
- uuid_type = channel: the module uses the channel name if available,
falling back to SIP Call-ID if not
For res_hep_rtcp:
- uuid_type = call-id: the module uses the SIP Call-ID header if the
channel type is PJSIP and we have a channel,
falling back to the Stasis event provided
channel name if not
- uuid_type = channel: the module uses the channel name
ASTERISK-25352 #close
Change-Id: Ide67e59a52d9c806e3cc0a797ea1a4b88a00122c
* No need to set language in a miniml configuration. 'en' will do just
fine.
* It would be useful to have an example of setting it to a different
language.
* Setting the documentation language explicitly is likewise not
required. Setting it to a different value is not common. At least
until there is a set of translated documentation.
Change-Id: I94d91ea34e129925f25af81ef8dc0906fb568cb7
Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
Note the default of remmed-out options. To clarify that those values are
not the defaults.
Change-Id: I849c29b7a710f0abc37355fcb5bfee335ae30738
Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
A minimal configuration does not need to explicitly spell out the
directories. The built-in defaults will do just fine. In many cases
they are wrong.
Change-Id: Id1a671e5c5e9923765a4156b57f9f7e263fdd26c
Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
This patch allows for having app_confbridge register the name of the
conference as an extension into a specific context, similar to
regcontext for chan_sip. This variant is not quite as involved as the
one in chan_sip and doesn't allow for multiple contexts or custom
extensions, you can only specify the context and the conference name
will always be used as the extension to register.
ASTERISK-25989 #close
Change-Id: Icacf94d9f2b5dfd31ef36f6cb702392619a7902f
Note: When packagers use these files (as an example) the paths are never
really used when they are split using '='.
Note: Thirdparty applications will also have trouble parsing the file when
expecting '=>'.
Change-Id: I0ada647f588e81f023fb1333ca15a1a333fd6004
A feature of chan_sip that service providers relied upon was the ability to
identify by the Authorization username. This is most often used when customers
have a PBX that needs to register rather than identify by IP address. From my
own experiance, this is pretty common with small businesses who otherwise
don't need a static IP.
In this scenario, a register from the customer's PBX may succeed because From
will usually contain the PBXs account id but an INVITE will contain the caller
id. With nothing recognizable in From, the service provider's Asterisk can
never match to an endpoint and the INVITE just stays unauthorized.
The fixes:
A new value "auth_username" has been added to endpoint/identify_by that
will use the username and digest fields in the Authorization header
instead of username and domain in the the From header to match an endpoint,
or the To header to match an aor. This code as added to
res_pjsip_endpoint_identifier_user rather than creating a new module.
Although identify_by was always a comma-separated list, there was only
1 choice so order wasn't preserved. So to keep the order, a vector was added
to the end of ast_sip_endpoint. This is only used by res_pjsip_registrar
to find the aor. The res_pjsip_endpoint_identifier_* modules are called in
globals/endpoint_identifier_order.
Along the way, the logic in res_pjsip_registrar was corrected to match
most-specific to least-specific as res_pjsip_endpoint_identifier_user does.
The order is:
username@domain
username@domain_alias
username
Auth by username does present 1 problem however, the first INVITE won't have
an Authorization header so the distributor, not finding a match on anything,
sends a securty_alert. It still sends a 401 with a challenge so the next
INVITE will have the Authorization header and presumably succeed. As a result
though, that first security alert is actually a false alarm.
To address this, a new feature has been added to pjsip_distributor that keeps
track of unidentified requests and only sends the security alert if a
configurable number of unidentified requests come from the same IP in a
configurable amout of time. Those configuration options have been added to
the global config object. This feature is only used when auth_username
is enabled.
Finally, default_realm was added to the globals object to replace the hard
coded "asterisk" used when an endpoint is not yet identified.
The testsuite tests all pass but new tests are forthcoming for this new
feature.
ASTERISK-25835 #close
Reported-by: Ross Beer
Change-Id: I30ba62d208e6f63439600916fcd1c08a365ed69d
This patch added new global pjsip option 'disable_multi_domain'.
Disabling Multi Domain can improve Realtime performance by reducing
number of database requests.
ASTERISK-25930 #close
Change-Id: I2e7160f3aae68475d52742107949a799aa2c7dc7
res_pjsip_mwi was missing the chan_sip "vmexten" functionality which adds
the Message-Account header to the MWI NOTIFY. Also, specifying mailboxes
on endpoints for unsolicited mwi and on aors for subscriptions required
that the admin know in advance which the client wanted. If you specified
mailboxes on the endpoint, subscriptions were rejected even if you also
specified mailboxes on the aor.
Voicemail extension:
* Added a global default_voicemail_extension which defaults to "".
* Added voicemail_extension to both endpoint and aor.
* Added ast_sip_subscription_get_dialog for support.
* Added ast_sip_subscription_get_sip_uri for support.
When an unsolicited NOTIFY is constructed, the From header is parsed, the
voicemail extension from the endpoint is substituted for the user, and the
result placed in the Message-Account field in the body.
When a subscribed NOTIFY is constructed, the subscription dialog local uri
is parsed, the voicemail_extension from the aor (looked up from the
subscription resource name) is substituted for the user, and the result
placed in the Message-Account field in the body.
If no voicemail extension was defined, the Message-Account field is not added
to the NOTIFY body.
mwi_subscribe_replaces_unsolicited:
* Added mwi_subscribe_replaces_unsolicited to endpoint.
The previous behavior was to reject a subscribe if a previous internal
subscription for unsolicited MWI was found for the mailbox. That remains the
default. However, if there are mailboxes also set on the aor and the client
subscribes and mwi_subscribe_replaces_unsolicited is set, the existing internal
subscription is removed and replaced with the external subscription. This
allows an admin to configure mailboxes on both the endpoint and aor and allows
the client to select which to use.
ASTERISK-25865 #close
Reported-by: Ross Beer
Change-Id: Ic15a9415091760539c7134a5ba3dc4a6a1217cea
There were a number of places in the res_pjsip stack that were getting
all endpoints or all aors, and then filtering them locally.
A good example is pjsip_options which, on startup, retrieves all
endpoints, then the aors for those endpoints, then tests the aors to see
if the qualify_frequency is > 0. One issue was that it never did
anything with the endpoints other than retrieve the aors so we probably
could have skipped a step and just retrieved all aors. But nevermind.
This worked reasonably well with local config files but with a realtime
backend and thousands of objects, this was a nightmare. The issue
really boiled down to the fact that while realtime supports predicates
that are passed to the database engine, the non-realtime sorcery
backends didn't.
They do now.
The realtime engines have a scheme for doing simple comparisons. They
take in an ast_variable (or list) for matching, and the name of each
variable can contain an operator. For instance, a name of
"qualify_frequency >" and a value of "0" would create a SQL predicate
that looks like "where qualify_frequency > '0'". If there's no operator
after the name, the engines add an '=' so a simple name of
"qualify_frequency" and a value of "10" would return exact matches.
The non-realtime backends decide whether to include an object in a
result set by calling ast_sorcery_changeset_create on every object in
the internal container. However, ast_sorcery_changeset_create only does
exact string matches though so a name of "qualify_frequency >" and a
value of "0" returns nothing because the literal "qualify_frequency >"
doesn't match any name in the objset set.
So, the real task was to create a generic string matcher that can take a
left value, operator and a right value and perform the match. To that
end, strings.c has a new ast_strings_match(left, operator, right)
function. Left and right are the strings to operate on and the operator
can be a string containing any of the following: = (or NULL or ""), !=,
>, >=, <, <=, like or regex. If the operator is like or regex, the
right string should be a %-pattern or a regex expression. If both left
and right can be converted to float, then a numeric comparison is
performed, otherwise a string comparison is performed.
To use this new function on ast_variables, 2 new functions were added to
config.c. One that compares 2 ast_variables, and one that compares 2
ast_variable lists. The former is useful when you want to compare 2
ast_variables that happen to be in a list but don't want to traverse the
list. The latter will traverse the right list and return true if all
the variables in it match the left list.
Now, the backends' fields_cmp functions call ast_variable_lists_match
instead of ast_sorcery_changeset_create and they can now process the
same syntax as the realtime engines. The realtime backend just passes
the variable list unaltered to the engine. The only gotcha is that
there's no common realtime engine support for regex so that's been noted
in the api docs for ast_sorcery_retrieve_by_fields.
Only one more change to sorcery was done... A new config flag
"allow_unqualified_fetch" was added to reg_sorcery_realtime.
"no": ignore fetches if no predicate fields were supplied.
"error": same as no but emit an error. (good for testing)
"yes": allow (the default);
"warn": allow but emit a warning. (good for testing)
Now on to res_pjsip...
pjsip_options was modified to retrieve aors with qualify_frequency > 0
rather than all endpoints then all aors. Not only was this a big
improvement in realtime retrieval but even for config files there's an
improvement because we're not going through endpoints anymore.
res_pjsip_mwi was modified to retieve only endpoints with something in
the mailboxes field instead of all endpoints then testing mailboxes.
res_pjsip_registrar_expire was completely refactored. It was retrieving
all contacts then setting up scheduler entries to check for expiration.
Now, it's a single thread (like keepalive) that periodically retrieves
only contacts whose expiration time is < now and deletes them. A new
contact_expiration_check_interval was added to global with a default of
30 seconds.
Ross Beer reports that with this patch, his Asterisk startup time dropped
from around an hour to under 30 seconds.
There are still objects that can't be filtered at the database like
identifies, transports, and registrations. These are not going to be
anywhere near as numerous as endpoints, aors, auths, contacts however.
Back to allow_unqualified_fetch. If this is set to yes and you have a
very large number of objects in the database, the pjsip CLI commands
will attempt to retrive ALL of them if not qualified with a LIKE.
Worse, if you type "pjsip show endpoint <tab>" guess what's going to
happen? :) Having a cache helps but all the objects will have to be
retrieved at least once to fill the cache. Setting
allow_unqualified_fetch=no prevents the mass retrieve and should be used
on endpoints, auths, aors, and contacts. It should NOT be used for
identifies, registrations and transports since these MUST be
retrieved in bulk.
Example sorcery.conf:
[res_pjsip]
endpoint=config,pjsip.conf,criteria=type=endpoint
endpoint=realtime,ps_endpoints,allow_unqualified_fetch=error
ASTERISK-25826 #close
Reported-by: Ross Beer
Tested-by: Ross Beer
Change-Id: Id2691e447db90892890036e663aaf907b2dc1c67
The 'reload' mechanism actually involves closing the underlying
socket and calling the appropriate udp, tcp or tls start functions
again. Only outbound_registration, pubsub and session needed work
to reset the transport before sending requests to insure that the
pjsip transport didn't get pulled out from under them.
In my testing, no calls were dropped when a transport was changed
for any of the 3 transport types even if ip addresses or ports were
changed. To be on the safe side however, a new transport option was
added (allow_reload) which defaults to 'no'. Unless it's explicitly
set to 'yes' for a transport, changes to that transport will be ignored
on a reload of res_pjsip. This should preserve the current behavior.
Change-Id: I5e759850e25958117d4c02f62ceb7244d7ec9edf
Previously you could add [!dnid] to the SIP dial string to alter the To:
header. This change allows you to alter the From header as well.
SIP dial string extra options now look like this:
[![touser[@todomain]][![fromuser][@fromdomain]]]
INCOMPATIBLE CHANGE: If you were using an exclamation mark in your To:
header, that is no longer possible.
ASTERISK-25803 #close
Change-Id: I2457e9ba7a89eb1da22084bab5a4d4328e189db7
Warnings and errors in the pjproject libraries are generally handled by
Asterisk. In many cases, Asterisk wouldn't even consider them to be warnings
or errors so the messages emitted by pjproject directly are either superfluous
or misleading. A good exampe of this are the level-0 errors pjproject emits
when it can't open a TCP/TLS socket to a client to send an OPTIONS. We don't
consider a failure to qualify a UDP client an "ERROR", why should a TCP/TLS
client be treated any differently?
A config file for res_pjproject has bene added (pjproject.conf) and a new
log_mappings object allows mapping pjproject levels to Asterisk levels
(or nothing). The defaults if no pjproject.conf file is found are the same
as those that were hard-coded into res_pjproject initially: 0,1 = LOG_ERROR,
2 = LOG_WARNING, 3,4,5 = LOG_DEBUG<level>
Change-Id: Iba7bb349c70397586889b8f45b8c3d6c6c8c3898
* changes:
app_confbridge: Add ability to get the muted conference state.
app_confbridge.c: Update CONFBRIDGE and CONFBRIDGE_INFO documentation.
app_confbridge: Make non-admin users join a muted conference muted.
During ICE negotiation the IPs of the local interfaces are sent to the remote
peer as host candidates. In many cases Asterisk is behind a static one-to-one
NAT, so these host addresses will be internal IP addresses.
To help in hiding the topology of the internal network, this patch adds the
ability to override the host candidates by matching them against a
user-defined list of replacements.
Change-Id: I1c9541af97b83a4c690c8150d19bf7202c8bff1f
This change exposes the configuration of various aspects of the TLS
support and sets the default to the modern standards.
The TLS cipher is now set to the best values according to the
Mozilla OpSec team, different TLS versions can now be disabled, and
the cipher order can be forced to be that of the server instead of
the client.
ASTERISK-24972 #close
Change-Id: I0a10f2883f7559af5e48dee0901251dbf30d45b8
Added new global option (regcontext) to pjsip. When set, Asterisk will
dynamically create and destroy a NoOp priority 1 extension
for a given endpoint who registers or unregisters with us.
ASTERISK-25670 #close
Reported-by: Daniel Journo
Change-Id: Ib1530c5b45340625805c057f8ff1fb240a43ea62
On a system with multiple ip addresses in the same subnet, if a
transport is bound to a specific ip address and endpoint/media_address
is set, the SIP/SDP will have the correct address in all fields but
the rtp stream MAY still originate from one of the other ip addresses,
most probably the "primary" ip address. This happens because
res_pjsip_sdp_rtp/create_rtp always calls ast_instance_new with
the "all" ip address (0.0.0.0 or ::).
The new option causes res_pjsip_sdp_rtp/create_rtp to call
ast_rtp_instance_new with the endpoint's media_address (if specified)
instead of the "all" address. This causes the packets to originate from
the specified address.
ASTERISK-25632
ASTERISK-25637
Reported-by: Olivier Krief
Reported-by: Dan Journo
Change-Id: I3dfaa079e54ba7fb7c4fd1f5f7bd9509bbf8bd88
In the sample sip.conf this is written with regard to notifyringing:
;notifyringing = no ; Control whether subscriptions already INUSE get sent
RINGING when another call is sent (default: yes)
However, this setting changes whether or not any RINGING indications are sent
to subscriptions. There is no separate configurable setting that allows
to control whether INUSE subscriptions also get sent RINGING. This is however
a useful option, to see (using BLF) if somebody else is able to handle an
incoming call or if everybody is busy.
This patch corrects the documentation for notifyringing (so the documentation
matches the functionality) and make notifyringing a tri-state option, by adding
the value 'notinuse' (in addition to 'yes' and 'no'). When notifyringing =
notinuse, only subscriptions that are not INUSE are sent the RINGING signal.
The default setting for notifyringing remains set to yes, so the default
behaviour is not affected.
ASTERISK-25558
Change-Id: I88f7036ee084bb3f43b74f15612695c6708f74aa
- The maximum_number_of_words was previously documented as being
the number of words that when exceeded, would result in the AMD
application returning that the audio represents a machine.
This was inconsistent with its actual functionality - it was
a number of words that when REACHED, would result in determination
as a machine.
This update corrects the functionality to match the previously
documented functionality. This is a backwards incompatible change
in configuration file, and has been added to UPGRADE.txt as a result.
The sample configuration file and application defaults have been updated
so that the default value is now 2, which reflects the same default
functionality as previous versions.
- Update documentation for silence_threshold, which previously implied
that it was measuring time, rather than noise averages in the sample.
- Update the comments in amd.conf.sample.
ASTERISK-25639 #close
Change-Id: I4b1451e5dc9cb3cb06d59b6ab872f5275ba79093
This option adds the ability to specify a timeout, in seconds, for a
participant in a ConfBridge. When the user's timeout has been reached,
the user is ejected from the conference with the CONFBRIDGE_RESULT
channel variable set to "TIMEOUT".
The rationale for this change is that there have been times where we
have seen channels get "stuck" in ConfBridge because a network issue
results in a SIP BYE not being received by Asterisk. While these
channels can be hung up manually via CLI/AMI/ARI, adding some sort of
automatic cleanup of the channels is a nice feature to have.
ASTERISK-25549 #close
Reported by Mark Michelson
Change-Id: I2996b6c5e16a3dda27595f8352abad0bda9c2d98
This patch adds a new setting "websockets_enabled" to sip.conf.
Setting this to false allows chan_sip to be used without causing
conflicts with res_pjsip_transport_websocket.
ASTERISK-24106 #close
Reported by: Andrew Nagy
Change-Id: I04fe8c4f2d57b2d7375e0e25826c91a72e93bea7
During outbound registration it is possible to receive a fatal (any permanent/
non-temporary 4xx, 5xx, 6xx) response from the registrar that is simply due
to a problem with the registrar itself. Upon receiving the failure response
Asterisk terminates outbound registration for the given endpoint.
This patch adds an option, 'fatal_retry_interval', that when set continues
outbound registration at the given interval up to 'max_retries' upon receiving
a fatal response.
ASTERISK-25485 #close
Change-Id: Ibc2c7b47164ac89cc803433c0bbe7063bfa143a2
When Asterisk is part of a larger distributed system, log files are often
gathered using tools (such as logstash) that prefer to consume information
and have it rendered using other tools (such as Kibana) that prefer a
structured format, e.g., JSON. This patch adds support for JSON formatted
logs by adding support for an optional log format specifier in Asterisk's
logging subsystem. By adding a format specifier of '[json]':
full => [json]debug,verbose,notice,warning,error
Log messages will be output to the 'full' channel in the following
format:
{
"hostname": Hostname or name specified in asterisk.conf
"timestamp": Date/Time
"identifiers": {
"lwp": Thread ID,
"callid": Call Identifier
}
"logmsg": {
"location": {
"filename": Name of the file that generated the log statement
"function": Function that generated the log statement
"line": Line number that called the logging function
}
"level": Log level, e.g., DEBUG, VERBOSE, etc.
"message": Actual text of the log message
}
}
ASTERISK-25425 #close
Change-Id: I8649bfedf3fb7bf3138008cc11565553209cc238
This change adds support for the 'rtp_timeout' and 'rtp_timeout_hold'
endpoint options. These allow the channel to be hung up if RTP
is not received from the remote endpoint for a specified number of
seconds.
ASTERISK-25259 #close
Change-Id: I3f39daaa7da2596b5022737b77799d16204175b9
* In sip.conf.sample fix sentence where we said that WS or WSS are supported
transports for use in an outbound register definition. They are not
supported in that case.
* In func_cdr.c made it clear that the Disable option for CDR_PROP can be used
to enable CDR on a channel.
ASTERISK-24867 #close
Reported by: Rusty Newton
ASTERISK-24853 #close
Reported by: PSDK
Change-Id: I3d698bc6302b9d00a0a995b5c4ad9a42d69b48ca
Some phones send g.726 audio packed for AAL2, which differs from what is
recommended by RFC 3351. If Asterisk receives audio formatted as such when
negotiating g.726 then it sounds a bit distorted. Added an option to
res_pjsip_endpoint that allows g.726 negotiated audio to be treated as g.726
AAL2 packed.
ASTERISK-25158 #close
Reported by: Steve Pitts
Change-Id: Ie7e21f75493d7fe53e75e12c971e72f5afa33615
When a client connects to a server via SSL/TLS, the server commonly utilizes an
RSA key-pair. However, other such algorithms exist (i.e. DSA and ECDSA), and if
the server socket is configured with a certificate for either one of those, it
would lose its compatibility with RSA-only clients.
Now, the server socket can be configured with up to one RSA, ECDSA and DSA key
each. For example, if a client is not compatible with SHA-2 hashed certificates
like Nokia mobile phones, the server socket still can use RSA/SHA-1 for legacy
clients and ECDSA/SHA-2 for everyone else.
ASTERISK-24815 #close
Reported by: Alexander Traud
patches:
tls_rsa_ecc_dsa.patch uploaded by Alexander Traud (License 6520)
Change-Id: Iada5e00d326db5ef86e0af7069b4dfa1b979da9a
The main IVR was playing demo-congrats. I've switched it over to the
basic-pbx-ivr-main file that we added in core sounds 1.4.27. This prompt
has Allison prompting the user with the actual IVR menu.
ASTERISK-24892 #close
Change-Id: Ifb749616ff8e156a1031ddaddfcc9244767a095d
Richard Mudgett
Sean Bright
George Joseph
Lorenzo Miniero
Sebastian Gutierrez
Sebastien Duthil
zuul
Alexander Traud
Kevin Harwell
Rusty Newton
Tzafrir Cohen
Joshua Colp
Michael Walton
Ludovic Gasc (GMLudo)
Aaron An
Alexei Gradinari
Matt Jordan
Timo Teräs
Tzafrir Cohen
Jaco Kroon
Diederik de Groot
George Joseph
Leif Madsen
Philip Correia
Walter Doekes
Mark Michelson
Daniel Journo
Ward van Wanrooij
Dade Brandon
Corey Farrell