8086 Commits (e158517a9c39ad22d2959f010d905ad2bc9872d4)

Author	SHA1	Message	Date
Richard Mudgett	8cced7767c	chan_dahdi/sig_analog: Fix distinctive ring detection to suck less. ... The distinctive ring feature interferes with detecting Caller ID and appears to have been broken for years. What happens is if you have a ring-ring cadence as used in the UK you get too many DAHDI events for the distinctive ring pattern array and Caller ID detection is aborted. I think when Zapata/DAHDI added the ring begin event it broke distinctive ring. More events happen than before and the code does no filtering of which event times are recorded in the pattern array. * Made distinctive ring only record the ringt count when the ring ends instead of on just any DAHDI event. Distinctive ring can be ring, ring-ring, ring-ring-ring, or different ring durations for the up to three rings. * Fixed the distinctive ring detection enable (chan_dahdi.conf option usedistinctiveringdetection) to be per port instead of somewhat per port and somewhat global. This has been broken since v1.8. * Fixed using the default distinctive ring context when the detected pattern does not match any configured dringX patterns. The default context did not get set when the previous call was a matched distinctive ring pattern and the current call is not matched. This has been broken since v1.8. * Made distinctive ring have no effect on Caller ID detection when it is disabled. Caller ID detection just monitors for 10 seconds before giving up. * Fixed leak of struct callerid_state memory when a polarity reversal during Caller ID detection causes the incoming call to be aborted. DAHDI-1143 AST-1545 ASTERISK-24825 #close Reported by: Richard Mudgett ASTERISK-17588 Reported by: Daniel Flounders Review: https://reviewboard.asterisk.org/r/4444/ ........ Merged revisions 432530 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432534 65c4cc65-6c06-0410-ace0-fbb531ad65f3	10 years ago
Richard Mudgett	13e715b30c	chan_sip: Fix realtime locking inversion when poking a just built peer. ... When a realtime peer is built it can cause a locking inversion when the just built peer is poked. If the CLI command "sip show channels" is periodically executed then a deadlock can happen because of the locking inversion. * Push the peer poke off onto the scheduler thread to avoid the locking inversion of the just built realtime peer. AST-1540 ASTERISK-24838 #close Reported by: Richard Mudgett Review: https://reviewboard.asterisk.org/r/4454/ ........ Merged revisions 432526 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432528 65c4cc65-6c06-0410-ace0-fbb531ad65f3	10 years ago
Matthew Jordan	de86b30dba	make: Remove 'res_features' from libraries to link against with cygwin/mingw32 ... Both the apps and channels Makefiles still listed 'res_features' as modules to link against when compiling for cygwin or mingw32. This module hasn't existed for quite some time. ASTERISK-18105 #close Reported by: feyfre ........ Merged revisions 432341 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432342 65c4cc65-6c06-0410-ace0-fbb531ad65f3	10 years ago
Matthew Jordan	34989bd9c8	channels/chan_sip: Don't send a BYE after final response when PBX thread fails ... When Asterisk fails to start a PBX thread for a new channel - for example, when the maxcalls setting in asterisk.conf is exceeded - we currently send a final response, and then attempt to send a BYE request to the UA. Since that's all sorts of wrong, this patch fixes that by setting sipalreadygone on the sip_pvt such that we don't get stuck sending BYE requests to something that does not want it. Note that this patch is a slight modification of the one on ASTERISK-15434. For clarity, it explicitly calls sipalreadygone with the calls to transmit a final response. ASTERISK-21845 ASTERISK-15434 #close Reported by: Makoto Dei Tested by: Matt Jordan patches: sip-pbxstart-failed.patch uploaded by Makoto Dei (License 5027) ........ Merged revisions 432320 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432321 65c4cc65-6c06-0410-ace0-fbb531ad65f3	10 years ago
Matthew Jordan	ddff640f94	channels/chan_sip: Clarify WARNING message in mismatched SRTP scenario ... When we receive an SDP as part of an offer/answer for a peer/friend has been configured to require encryption, and that SDP offer/answer failed to provide acceptable crypto attributes, we currently issue a WARNING that uses the phrase "we" and "requested". In this case, both of those terms are ambiguous - the user will probably think "we" is Asterisk (it most likely isn't) and it may not be a "request", so much as an SDP that was received in some fashion. This patch makes the WARNING messages slightly less bad and a bit more accurate as well. ASTERISK-23214 #close Reported by: Rusty Newton ........ Merged revisions 432277 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432278 65c4cc65-6c06-0410-ace0-fbb531ad65f3	10 years ago
Matthew Jordan	978649a568	channels/chan_sip: Fix crash when transmitting packet after thread shutdown ... When the monitor thread is stopped, its pthread ID is set to a specific value (AST_PTHREADT_STOP) so that later portions of the code can determine whether or not it is safe to manipulate the thread. Unfortunately, __sip_reliable_xmit failed to check for that value, checking instead only for AST_PTHREAD_STOP. Passing the invalid yet very specific value to pthread_kill causes a crash. This patch adds a check for AST_PTHREADT_STOP in __sip_reliable_xmit such that it doesn't attempt to poke the thread if the thread has already been stopped. ASTERISK-24800 #close Reported by: JoshE ........ Merged revisions 432198 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432199 65c4cc65-6c06-0410-ace0-fbb531ad65f3	10 years ago
Matthew Jordan	3d1a1533bf	ARI/PJSIP: Apply requesting channel's format cap to created channels ... This patch addresses the following problems: * ari/resource_channels: In ARI, we currently create a format capability structure of SLIN and apply it to the new channel being created. This was originally done when the PBX core was used to create the channel, as there was a condition where a newly created channel could be created without any formats. Unfortunately, now that the Dial API is being used, this has two drawbacks: (a) SLIN, while it will ensure audio will flows, can cause a lot of needless transcodings to occur, particularly when a Local channel is created to the dialplan. When no format capabilities are available, the Dial API handles this better by handing all audio formats to the requsted channels. As such, we defer to that API to provide the format capabilities. (b) If a channel (requester) is causing this channel to be created, we currently don't use its format capabilities as we are passing in our own. However, the Dial API will use the requester channel's formats if none are passed into it, and the requester channel exists and has format capabilities. This is the "best" scenario, as it is the most likely to create a media path that minimizes transcoding. Fixing this simply entails removing the providing of the format capabilities structure to the Dial API. * chan_pjsip: Rather than blindly picking the first format in the format capability structure - which actually *can* be a video or text format - we select an audio format, and only pick the first format if that fails. That minimizes the weird scenario where we attempt to transcode between video/audio. * res_pjsip_sdp_rtp: Applied the joint capapbilites to the format structure. Since ast_request already limits us down to one format capability once the format capabilities are passed along, there's no reason to squelch it here. * channel: Fixed a comment. The reason we have to minimize our requested format capabilities down to a single format is due to Asterisk's inability to convey the format to be used back "up" a channel chain. Consider the following: PJSIP/A => L;1 <=> L;2 => PJSIP/B g,u,a g,u,a g,u,a u That is, we have PJSIP/A dialing a Local channel, where the Local;2 dials PJSIP/B. PJSIP/A has native format capabilities g722,ulaw,alaw; the Local channel has inherited those format capabilities down the line; PJSIP/B supports only ulaw. According to these format capabilities, ulaw is acceptable and should be selected across all the channels, and no transcoding should occur. However, there is no way to convey this: when L;2 and PJSIP/B are put into a bridge, we will select ulaw, but that is not conveyed to PJSIP/A and L;1. Thus, we end up with: PJSIP/A <=> L;1 <=> L;2 <=> PJSIP/B g g X u u Which causes g722 to be written to PJSIP/B. Even if we can convey the 'ulaw' choice back up the chain (which through some severe hacking in Local channels was accomplished), such that the chain looks like: PJSIP/A <=> L;1 <=> L;2 <=> PJSIP/B u u u u We have no way to tell PJSIP/A's *channel driver* to Answer in the SDP back with only 'ulaw'. This results in all the channel structures being set up correctly, but PJSIP/A *still* sending g722 and causing the chain to fall apart. There's a lot of difficulty just in setting this up, as there are numerous race conditions in the act of bridging, and no clean mechanism to pass the selected format backwards down an established channel chain. As such, the best that can be done at this point in time is clarifying the comment. Review: https://reviewboard.asterisk.org/r/4434/ ASTERISK-24812 #close Reported by: Matt Jordan git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432195 65c4cc65-6c06-0410-ace0-fbb531ad65f3	10 years ago
Richard Mudgett	89b48af3e5	chan_dahdi/sig_analog: Put log message strings on one line. ... With the log messages on one line, you can search for the log message seen in the log and expect to find it. ........ Merged revisions 432032 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432034 65c4cc65-6c06-0410-ace0-fbb531ad65f3	10 years ago
Richard Mudgett	e0ff83c272	chan_dahdi: Remove some dead code. ... ........ Merged revisions 431992 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431993 65c4cc65-6c06-0410-ace0-fbb531ad65f3	10 years ago
Corey Farrell	eb9448a1ae	Create work around for scheduler leaks during shutdown. ... * Added ast_sched_clean_by_callback for cleanup of scheduled events that have not yet fired. * Run all pending peercnt_remove_cb and replace_callno events in chan_iax2. Cleanup of replace_callno events is only run 11, since it no longer releases any references or allocations in 13+. ASTERISK-24451 #close Reported by: Corey Farrell Review: https://reviewboard.asterisk.org/r/4425/ ........ Merged revisions 431916 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431917 65c4cc65-6c06-0410-ace0-fbb531ad65f3	10 years ago
Joshua Colp	3543a36362	'information' ends with an 'n'. ... git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431752 65c4cc65-6c06-0410-ace0-fbb531ad65f3	10 years ago
Joshua Colp	5d26236758	chan_pjsip: Fix crash when CHANNEL dialplan function is invoked with pjsip argument and no type. ... ASTERISK-24771 #close Reported by: Niklas Larsson git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431751 65c4cc65-6c06-0410-ace0-fbb531ad65f3	10 years ago
Matthew Jordan	1995baad71	ARI/PJSIP: Add the ability to redirect (transfer) a channel in a Stasis app ... This patch adds a new feature to ARI to redirect a channel to another server, and fixes a few bugs in PJSIP's handling of the Transfer dialplan application/ARI redirect capability. *New Feature* A new operation has been added to the ARI channels resource, redirect. With this, a channel in a Stasis application can be redirected to another endpoint of the same underlying channel technology. *Bug fixes* In the process of writing this new feature, two bugs were fixed in the PJSIP stack: (1) The existing .transfer channel callback had the limitation that it could only transfer channels to a SIP URI, i.e., you had to pass 'PJSIP/sip:foo@my_provider.com' to the dialplan application. While this is still supported, it is somewhat unintuitive - particularly in a world full of endpoints. As such, we now also support specifying the PJSIP endpoint to transfer to. (2) res_pjsip_multihomed was, unfortunately, trying to 'help' a 302 redirect by updating its Contact header. Alas, that resulted in the forwarding destination set by the dialplan application/ARI resource/whatever being rewritten with very incorrect information. Hence, we now don't bother updating an outgoing response if it is a 302. Since this took a looong time to find, some additional debug statements have been added to those modules that update the Contact headers. Review: https://reviewboard.asterisk.org/r/4316/ ASTERISK-24015 #close Reported by: Private Name ASTERISK-24703 #close Reported by: Matt Jordan git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431717 65c4cc65-6c06-0410-ace0-fbb531ad65f3	10 years ago
Richard Mudgett	feddab7944	HTTP: Stop accepting requests on final system shutdown. ... There are three CLI commands to stop and restart Asterisk each. 1) core stop/restart now - Hangup all calls and stop or restart Asterisk. New channels are prevented while the shutdown request is pending. 2) core stop/restart gracefully - Stop or restart Asterisk when there are no calls remaining in the system. New channels are prevented while the shutdown request is pending. 3) core stop/restart when convenient - Stop or restart Asterisk when there are no calls in the system. New calls are not prevented while the shutdown request is pending. ARI has made stopping/restarting Asterisk more problematic. While a shutdown request is pending it is desirable to continue to process ARI HTTP requests for current calls. To handle the current calls while a shutdown request is pending, a new committed to shutdown phase is needed so ARI applications can deal with the calls until the system is fully committed to shutdown. * Added a new shutdown committed phase so ARI applications can deal with calls until the final committed to shutdown phase is reached. * Made refuse new HTTP requests when the system has reached the final system shutdown phase. Starting anything while the system is actively releasing resources and unloading modules is not a good thing. * Split the bridging framework shutdown to not cleanup the global bridging containers when shutting down in a hurry. This is similar to how other modules prevent crashes on rapid system shutdown. * Moved ast_begin_shutdown(), ast_cancel_shutdown(), and ast_shutting_down(). You should not have to include channel.h just to access these system functions. ASTERISK-24752 #close Reported by: Matthew Jordan Review: https://reviewboard.asterisk.org/r/4399/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431692 65c4cc65-6c06-0410-ace0-fbb531ad65f3	10 years ago
Matthew Jordan	29f3ff0b61	channels/chan_sip: Fix RealTime error during SIP unregistration with MariaDB ... When a SIP device that has its registration stored in RealTime unregisters, the entry for that device is updated with blank values, i.e., "", indicating that it is no longer registered. Unfortunately, one of those values that is 'blanked' is the device's port. If the column type for the port is not a string datatype (the recommended type is integer), an ODBC or database error will be thrown. MariaDB does not coerce empty strings to a valid integer value. This patch updates the query run from chan_sip such that it replaces the port value with a value of '0', as opposed to a blank value. This is the value that other database backends coerce the empty string ("") to already, and the handling of reading a RealTime registration value from a backend already anticipates receiving a port of '0' from the backends. ASTERISK-24772 #close Reported by: Richard Miller patches: chan_sip.diff uploaded by Richard Miller (License 5685) ........ Merged revisions 431673 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431674 65c4cc65-6c06-0410-ace0-fbb531ad65f3	10 years ago
Mark Michelson	43dd42d8ae	Fix some memory leaks. ... These memory leaks were found and fixed by John Hardin. I'm just committing them for him. ASTERISK-24736 #close Reported by Mark Michelson Review: https://reviewboard.asterisk.org/r/4389 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431468 65c4cc65-6c06-0410-ace0-fbb531ad65f3	10 years ago
Mark Michelson	22fc3359da	Use SIPS URIs in Contact headers when appropriate. ... RFC 3261 sections 8.1.1.8 and 12.1.1 dictate specific scenarios when we are required to use SIPS URIs in Contact headers. Asterisk's non-compliance with this could actually cause calls to get dropped when communicating with clients that are strict about checking the Contact header. Both of the SIP stacks in Asterisk suffered from this issue. This changeset corrects the behavior in chan_sip. ASTERISK-24646 #close Reported by Stephan Eisvogel Review: https://reviewboard.asterisk.org/r/4346 ........ Merged revisions 431423 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431424 65c4cc65-6c06-0410-ace0-fbb531ad65f3	10 years ago
Kevin Harwell	e2b493b8f0	chan_sip: stale nonce causes failure ... When refreshing (with a small expiration) a registration that was sent to chan_sip the nonce would be considered stale and reject the registration. What was happening was that the initial registration's "dialog" still existed in the dialogs container and upon refresh the dialog match algorithm would choose that as the "dialog" instead of the newly created one. This occurred because the algorithm did not check to see if the from tag matched if authentication info was available after the 401. So, it ended up assuming the original "dialog" was a match and stopped the search. The old "dialog" of course had an old nonce, thus the stale nonce message. This fix attempts to leave the original functionality alone except in the case of a REGISTER. If a REGISTER is received if searches for an existing "dialog" matching only on the callid. If the expires value is low enough it will reuse dialog that is there, otherwise it will create a new one. ASTERISK-24715 #close Reported by: John Bigelow Review: https://reviewboard.asterisk.org/r/4367/ ........ Merged revisions 431187 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431194 65c4cc65-6c06-0410-ace0-fbb531ad65f3	10 years ago
David M. Lee	702d79de2a	Various fixes for OS X ... This patch addresses compilation errors on OS X. It's been a while, so there's quite a few things. * Fixed __attribute__ decls in route.h to be portable. * Fixed htonll and ntohll to work when they are defined as macros. * Replaced sem_t usage with our ast_sem wrapper. * Added ast_sem_timedwait to our ast_sem wrapper. * Fixed some GCC 4.9 warnings using sig*set() functions. * Fixed some format strings for portability. * Fixed compilation issues with res_timing_kqueue (although tests still fail on OS X). * Fixed menuconfig /sbin/launchd detection, which disables res_timing_kqueue on OS X). ASTERISK-24539 #close Reported by: George Joseph ASTERISK-24544 #close Reported by: George Joseph Review: https://reviewboard.asterisk.org/r/4327/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431092 65c4cc65-6c06-0410-ace0-fbb531ad65f3	10 years ago
Kevin Harwell	630eea087d	Investigate and fix memory leaks in Asterisk ... Fixed memory leaks that were found in Asterisk. ASTERISK-24693 #close Reported by: Kevin Harwell Review: https://reviewboard.asterisk.org/r/4347/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430999 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Walter Doekes	e23f07beb8	Fix typo's (retrieve, specified, address). ... ........ Merged revisions 430996 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430998 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Walter Doekes	9210648bbe	chan_sip: Case insensitive comparison of "defaultuser" parameter. ... All the other configuration options are case insensitive, so this one should be too. ASTERISK-24355 #close Reported by: HZMI8gkCvPpom0tM patches: ast.patch uploaded by HZMI8gkCvPpom0tM (License 6658) ........ Merged revisions 430993 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430994 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	74a13629e2	channels/chan_sip: Fix registration leak during reload ... When the SIP registrations were migrated to using ao2 in what was then trunk, the explicit destruction of the registrations on module reload was removed and not replaced with an ao2 equivalent. Debugging done by Stefan Engström, the issue reporter, on ASTERISK-24673 confirmed that the reference in the registry_list container was being leaked. Since the purpose of cleanup_all_regs is to prep a registration for destruction, this function now calls an ao2_callback function callback with the OBJ_MULTIPLE | OBJ_NODATA | OBJ_UNLINK flags used to remove the registrations. This cleans up each registration, and also removes it from the registration container registry_list. Review: https://reviewboard.asterisk.org/r/4355/ ASTERISK-24640 #close Reported by: Max Man ASTERISK-24673 #close Reported by: Stefan Engström Tested by: Stefan Engström git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430864 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	6af6a216a1	CHANNEL(peer), chan_iax2, res_fax, SNMP agent: Fix deadlock from reaching across a bridge. ... Calling ast_channel_bridge_peer() cannot be done while holding any channel locks. The reported issue hit the deadlock in chan_iax2, but an audit of the ast_channel_bridge_peer() calls found three more locations where the same deadlock can occur. * Made CHANNEL(peer), res_fax, and the SNMP agent not call ast_channel_bridge_peer() with any channel locked. For CHANNEL(peer) I had to rework the logic to not hold the channel lock. * Made chan_iax2 no longer call ast_channel_bridge_peer(). It was done for legacy reasons that no longer apply. * Removed the iax.conf forcejitterbuffer option. It is now always enabled when the jitterbuffer option is enabled. If you put a jitter buffer on a channel it will be on the channel. ASTERISK-24600 #close Reported by: Jeff Collell Review: https://reviewboard.asterisk.org/r/4342/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430817 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Mark Michelson	821c15ae53	Fix problem where a hung channel could occur on a failed blind transfer. ... Different clients react differently to being told that a blind transfer has failed. Some will simply send a BYE and be done with it. Others will attempt to reinvite themselves back onto the call. In the latter case, we were creating a new channel and then leaving it to sit forever doing nothing. With this code change, that new channel will not be created and the dialog with the transferring channel will be cleaned up properly. ASTERISK-24624 #close Reported by Zane Conkle Review: https://reviewboard.asterisk.org/r/4339 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430714 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Joshua Colp	056f11ac65	chan_pjsip: Add configure check for 'pjsip_get_dest_info' function. ... The 'pjsip_get_dest_info' function is used to determine if the signaling transport of the dialog is secure or not. This function was added in PJSIP 2.3 and does not exist in earlier versions. This configure check allows Asterisk to build and run with older versions at the loss of the 'secure' argument for the PJSIP CHANNEL dialplan function. Usage of this argument will require upgrading to PJSIP 2.3. ASTERISK-24665 #close Reported by: Mark Michelson Review: https://reviewboard.asterisk.org/r/4329/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430546 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	4b363688d4	AMI: Make AMI actions that generate event lists consistent. ... * Made the following AMI actions use list API calls for consistency: Agents BridgeInfo BridgeList BridgeTechnologyList ConfbridgeLIst ConfbridgeLIstRooms CoreShowChannels DAHDIShowChannels DBGet DeviceStateList ExtensionStateList FAXSessions Hangup IAXpeerlist IAXpeers IAXregistry MeetmeList MeetmeListRooms MWIGet ParkedCalls Parkinglots PJSIPShowEndpoint PJSIPShowEndpoints PJSIPShowRegistrationsInbound PJSIPShowRegistrationsOutbound PJSIPShowResourceLists PJSIPShowSubscriptionsInbound PJSIPShowSubscriptionsOutbound PresenceStateList PRIShowSpans QueueStatus QueueSummary ShowDialPlan SIPpeers SIPpeerstatus SIPshowregistry SKINNYdevices SKINNYlines Status VoicemailUsersList * Incremented the AMI version to 2.7.0. * Changed astman_send_listack() to not use the listflag parameter and always set the value to "Start" so the start capitalization is consistent. i.e., The FAXSessions used "Start" while the rest of the system used "start". The corresponding complete event always used "Complete". * Fixed ami_show_resource_lists() "PJSIPShowResourceLists" to output the AMI ActionID for all of its list events. * Fixed off-nominal AMI protocol error in manager_bridge_info(), manager_parking_status_single_lot(), and manager_parking_status_all_lots(). Use of astman_send_error() after responding to the original AMI action request violates the action response pattern by sending two responses. * Fixed minor protocol error in action_getconfig() when no requested categories are found. Each line needs to be formatted as "Header: text". * Fixed off-nominal memory leak in manager_build_parked_call_string(). * Eliminated unnecessary use of RAII_VAR() in ami_subscription_detail(). ASTERISK-24049 #close Reported by: Jonathan Rose Review: https://reviewboard.asterisk.org/r/4315/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430434 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Joshua Colp	a7c38428af	pjsip: Add 'PJSIP_AOR' and 'PJSIP_CONTACT' dialplan functions. ... The PJSIP_AOR dialplan function allows inspection of configured AORs including what contacts are currently bound to them. The PJSIP_CONTACT dialplan function allows inspection of contacts in existence. These can include both externally added (by way of registration) or permanent ones. ASTERISK-24341 Reported by: xrobau Review: https://reviewboard.asterisk.org/r/4308/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430179 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	9735a13429	chan_sip: Send CANCEL via original INVITE destination even after UPDATE request ... Given the following scenario: * Three SIP phones (A, B, C), all communicating via a proxy with Asterisk * A call is established between A and B. B performs a SIP attended transfer of A to C. B sets the call on hold (A is hearing MOH) and dials the extension of C. While phone C is ringing, B transfers the call (that is, what we typically call a 'blond transfer'). * When the transfer completes, A hears the ringing of phone C, while B is idle. In the SIP messaging for the above scenario, a REFER request is sent to transfer the call. When "sendrpid=yes" is set in sip.conf, Asterisk may send an UPDATE request to phone C to update party information. This update is sent directly to phone C, not through the intervening proxy. This has the unfortunate side effect of providing route information, which is then set on the sip_pvt structure for C. If someone (e.g. B) is trying to get the call back (through a directed pickup), Asterisk will send a CANCEL request to C. However, since we have now updated the route set, the CANCEL request will be sent directly to C and not through the proxy. The phone ignores this CANCEL according to RFC3261 (Section 9.1). This patch updates reqprep such that the route is not updated if an UPDATE request is being sent while the INVITE state is INV_PROCEEDING or INV_EARLY_MEDIA. This ensures that a subsequent CANCEL request is still sent to the correct location. Review: https://reviewboard.asterisk.org/r/4279 ASTERISK-24628 #close Reported by: Karsten Wemheuer patches: issue.patch uploaded by Karsten Wemheuer (License 5930) ........ Merged revisions 429982 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429983 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	7074bf956b	chan_dahdi: Don't ignore setvar when using configuration section scheme. ... When the configuration section scheme of chan_dahdi.conf is used (keyword dahdichan instead of channel) all setvar= options are completely ignored. No variable defined this way appears in the created DAHDI channels. * Move the clearing of setvar values to after the deferred processing of dahdichan. AST-1378 #close Reported by: Guenther Kelleter Patch by: Guenther Kelleter ........ Merged revisions 429825 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429829 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	b22c833c12	chan_dahdi.c, res_rtp_asterisk.c: Change some spammy debug messages to level 5. ... ASTERISK-24337 #close Reported by: Rusty Newton ........ Merged revisions 429804 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429805 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	e603fbe04a	chan_dahdi: Populate CALLERID(ani2) for incoming calls in featdmf signaling mode. ... For the featdmf signaling mode the incoming MF Caller-ID information is formatted as follows: *${CALLERID(ani2)}${CALLERID(ani)}#*${EXTEN}# Rather than discarding the ani2 digits, populate the CALLERID(ani2) value with what is received instead. AST-1368 #close Reported by: Denis Martinez Patches: extract_ani2_for_featdmf_v11.patch (license #5621) patch uploaded by Richard Mudgett ........ Merged revisions 429783 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429784 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Mark Michelson	5bd5f580c1	Ensure the correct value is returned for CHANNEL(pjsip, secure) ... Prior to this patch, we were using the PJSIP dialog's secure flag to determine if a secure transport was being used. Unfortunately, the dialog's secure flag was only set if a SIPS URI were in use, as required by RFC 3261 sections 12.1.1 and 12.1.2. What we're interested in is not dialog security, but transport security. This code change switches to a model where we use the dialog's target URI to determine what transport would be used to communicate, and then check if that transport is secure. AST-1450 #close Reported by John Bigelow Review: https://reviewboard.asterisk.org/r/4277 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429739 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Walter Doekes	9ae57e0dd6	Fix printf problems with high ascii characters after r413586 (1.8). ... In r413586 (1.8) various casts were added to silence gcc 4.10 warnings. Those fixes included things like: -out += sprintf(out, "%%%02X", (unsigned char) *ptr); +out += sprintf(out, "%%%02X", (unsigned) *ptr); That works for low ascii characters, but for the high range that yields e.g. FFFFFFC3 when C3 is expected. This changeset: - fixes those casts to use the 'hh' unsigned char modifier instead - consistently uses %02x instead of %2.2x (or other non-standard usage) - adds a few 'h' modifiers in various places - fixes a 'replcaes' typo - dev/urandon typo (in 13+ patch) Review: https://reviewboard.asterisk.org/r/4263/ ASTERISK-24619 #close Reported by: Stefan27 (on IRC) ........ Merged revisions 429673 from http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged revisions 429674 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429675 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Joshua Colp	f26d4618eb	chan_sip: Allow T.38 switch-over when SRTP is in use. ... Previously when SRTP was enabled on a channel it was not possible to switch to T.38 as no crypto attributes would be present. This change makes it so it is now possible. If a T.38 re-invite comes in SRTP is terminated since in practice you can't encrypt a UDPTL stream. Now... if we were doing T.38 over RTP (which does exist) then we'd have a chance but almost nobody does that so here we are. ASTERISK-24449 #close Reported by: Andreas Steinmetz patches: udptl-ignore-srtp-v2.patch submitted by Andreas Steinmetz (license 6523) ........ Merged revisions 429632 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429633 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Kevin Harwell	01c4e76c4e	chan_pjsip: Race between channel answer and bridge setup when using direct media ... When direct media is enabled and a pjsip channel is answered a race would occur between the handling of the answer and bridge setup. Sometimes the media negotiation would take place after the native bridge was setup. This resulted in a NULL media address, which in turn resulted in Asterisk using its address as the remote media address when sending a reinvite. This patch makes the chan_pjsip answer handler synchronous thus alleviating the race condition (the bridge won't start setting things up until after it returns). ASTERISK-24563 #close Reported by: Steve Pitts Review: https://reviewboard.asterisk.org/r/4257/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429477 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Joshua Colp	0c9fbb449f	res_pjsip_session: Delay sending BYE if a re-INVITE transaction is in progress. ... Given the scenario where a PJSIP channel is in a native RTP bridge with direct media and the channel is then hung up the code will currently re-INVITE the channel back to Asterisk and send a BYE at the same time. Many SIP implementations dislike this greatly. This change makes it so that if a re-INVITE transaction is in progress the BYE is queued to occur after the completion of the transaction (be it through normal means or a timeout). Review: https://reviewboard.asterisk.org/r/4248/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429409 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Joshua Colp	fb768ec33a	res_http_websocket: Fix crash due to double freeing memory when receiving a payload length of zero. ... Frames with a payload length of 0 were incorrectly handled in res_http_websocket. Provided a frame with a payload had been received prior it was possible for a double free to occur. The realloc operation would succeed (thus freeing the payload) but be treated as an error. When the session was then torn down the payload would be freed again causing a crash. The read function now takes this into account. This change also fixes assumptions made by users of res_http_websocket. There is no guarantee that a frame received from it will be NULL terminated. ASTERISK-24472 #close Reported by: Badalian Vyacheslav Review: https://reviewboard.asterisk.org/r/4220/ Review: https://reviewboard.asterisk.org/r/4219/ ........ Merged revisions 429270 from http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged revisions 429272 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429273 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Kevin Harwell	525c823b4b	Direct Media calls within private network sometimes get one way audio ... When endpoints with direct_media enabled, behind a firewall (Asterisk on a separate network) and were bridged sometimes Asterisk would send the ip address of the firewall in the sdp to one of the phones in the reinvite resulting in one way audio. When sending the reinvite Asterisk will retrieve the media address from the associated rtp instance, but if frames were being read this can be overwritten with another address (in this case the firewall's). This patch ensures that Asterisk uses the original device address when using direct media. ASTERISK-24563 Reported by: Steve Pitts Review: https://reviewboard.asterisk.org/r/4216/ ........ Merged revisions 429195 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429196 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	d79c68d3fb	main/stasis: Allow subscriptions to use a threadpool for message delivery ... Prior to this patch, all Stasis subscriptions would receive a dedicated thread for servicing published messages. In contrast, prior to r400178 (see review https://reviewboard.asterisk.org/r/2881/), the subscriptions shared a thread pool. It was discovered during some initial work on Stasis that, for a low subscription count with high message throughput, the threadpool was not as performant as simply having a dedicated thread per subscriber. For situations where a subscriber receives a substantial number of messages and is always present, the model of having a dedicated thread per subscriber makes sense. While we still have plenty of subscriptions that would follow this model, e.g., AMI, CDRs, CEL, etc., there are plenty that also fall into the following two categories: * Large number of subscriptions, specifically those tied to endpoints/peers. * Low number of messages. Some subscriptions exist specifically to coordinate a single message - the subscription is created, a message is published, the delivery is synchronized, and the subscription is destroyed. In both of the latter two cases, creating a dedicated thread is wasteful (and in the case of a large number of peers/endpoints, harmful). In those cases, having shared delivery threads is far more performant. This patch adds the ability of a subscriber to Stasis to choose whether or not their messages are dispatched on a dedicated thread or on a threadpool. The threadpool is configurable through stasis.conf. Review: https://reviewboard.asterisk.org/r/4193 ASTERISK-24533 #close Reported by: xrobau Tested by: xrobau ........ Merged revisions 428681 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@428687 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Joshua Colp	aeb5f34ecc	AST-2014-015: Fix race condition in chan_pjsip when sending responses after a CANCEL has been received. ... Due to the serialized architecture of chan_pjsip there exists a race condition where a CANCEL may be received and processed before responses (such as 180 Ringing, 183 Session Progress, and 200 OK) are sent. Since the session is in an unexpected state PJSIP will assert when this is attempted. This change makes it so that these responses are not sent on disconnected sessions. ASTERISK-24471 #close Reported by: yaron nahum ........ Merged revisions 428301 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@428302 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	524588c345	ast_str: Fix improper member access to struct ast_str members. ... Accessing members of struct ast_str outside of the string manipulation API routines is invalid since struct ast_str is supposed to be treated as opaque. Review: https://reviewboard.asterisk.org/r/4194/ ........ Merged revisions 428244 from http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged revisions 428245 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@428246 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Corey Farrell	e8286df19c	chan_sip: Fix theoretical leak of p->refer. ... If transmit_refer is called when p->refer is already allocated, it leaks the previous allocation. Updated code to always free previous allocation during a new allocation. Also instead of checking if we have a previous allocation, always create a clean record. ASTERISK-15242 #close Reported by: David Woolley Review: https://reviewboard.asterisk.org/r/4160/ ........ Merged revisions 428117 from http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged revisions 428118 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@428119 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Joshua Colp	b902694840	chan_pjsip: Remove AOR check when dialing and one is specified. ... The AOR value may contain the name of an AOR or a full SIP URI. Checking if the AOR exists can't be done as a result of this. ........ Merged revisions 428051 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@428052 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Joshua Colp	62d33a6696	chan_pjsip: Add additional log message when an AOR is specified when dialing and it does not exist. ... ASTERISK-24499 #close Reported by: Rusty Newton ........ Merged revisions 428007 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@428008 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Joshua Colp	99414651e4	chan_motif / chan_pjsip: Fix incorrect "No such module" messages when reloading. ... For chan_motif the direct return value of the underlying config options framework was passed back. This can relay various states which the module loader would not interpet as success. It has been changed so only on errors will it report back an error. For chan_pjsip the code implemented a dummy reload function which always returned an error. This has been removed as all configuration is held within res_pjsip instead. ASTERISK-23651 #close Reported by: Rusty Newton ........ Merged revisions 427981 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@427982 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	468ccd1b66	channels/chan_mgcp: Fix regression which causes gateways to be skipped ... In r227276, a while loop was turned into a for loop. Unfortunately, a portion of the while loop was left in the code such that, when a static gateway is encountered in the list of MGCP gateways, the next gateway would be skipped. At best, we would simply flip past a gateway; at worst, this could lead to a crash. ASTERISK-24500 #close Reported by: Xavier Hienne patches: chan_mgcp.patch uploaded by Xavier Hienne (License 6657) ........ Merged revisions 427613 from http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged revisions 427614 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@427615 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Corey Farrell	a6bfa0d20a	chan_console: Fix reference leaks to pvt. ... Fix a bunch of calls to get_active_pvt where the reference is never released. ASTERISK-24504 #close Reported by: Corey Farrell Review: https://reviewboard.asterisk.org/r/4152/ ........ Merged revisions 427554 from http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged revisions 427555 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@427557 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	f6809b01df	channels/sip/reqresp_parser: Fix unit tests for r426594 ... When r426594 was made, it did not take into account a unit test that verified that the function properly populated the unsupported buffer. The function would previously memset the buffer if it detected it had any contents; since this function can now be called iteratively on successive headers, the unit tests would now fail. This patch updates the unit tests to reset the buffer themselves between successive calls, and updates the documentation of the function to note that this is now required. ........ Merged revisions 426858 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 426860 from http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged revisions 426863 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@426865 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Igor Goncharovskiy	934ab9d1b8	Add additional checks for NULL pointers to fix several crashes reported. ...	11 years ago