asterisk

Commit Graph

Author	SHA1	Message	Date
George Joseph	140e453afc	debug_utilities: Add ast_logescalator The escalator works by creating a set of startup commands in cli.conf that set up logger channels and issue the debug commands for the subsystems specified. If asterisk is running when it is executed, the same commands will be issued to the running instance. The original cli.conf is saved before any changes are made and can be restored by executing '$prog --reset'. The log output will be stored in... $astlogdir/message.$uniqueid $astlogdir/debug.$uniqueid $astlogdir/dtmf.$uniqueid $astlogdir/fax.$uniqueid $astlogdir/security.$uniqueid $astlogdir/pjsip_history.$uniqueid $astlogdir/sip_history.$uniqueid Some minor tweaks were made to chan_sip, and res_pjsip_history so their history output could be send to a log channel as packets are captured. A minor tweak was also made to manager so events are output to verbose when "manager set debug on" is issued. Change-Id: I799f8e5013b86dc5282961b27383d134bf09e543	9 years ago
Richard Mudgett	7f21d12d2d	chan_oss.c: Fix format ref leak in oss_read(). Change-Id: I0a5d56c7dcf327d60f86a4c25a23571733709fd0	9 years ago
zuul	8d4c188fda	Merge "chan_sip: Remember SDP negotiation on SIP_CODEC_INBOUND." into 14	9 years ago
zuul	06936fdf1d	Merge "chan_rtp.c: Fix uninitialized memory crash." into 14	9 years ago
Alexander Traud	0b89c7c12e	chan_sip: Remember SDP negotiation on SIP_CODEC_INBOUND. After a SIP_CODEC_INBOUND in the dialplan, do not continue with cached formats but remember the joint format. Cached formats contain default parameters, often create an empty fmtp line. However, a joint format might have passed format_get_joint(.) in a res_format_attr_* module (like Opus Codec) and contain the resulting format parameters from a SDP negotiation. ASTERISK-26691 #close Change-Id: I35712d98a793d4c3efdd156cec57deab9014b1dc	9 years ago
Joshua Colp	e40016e39f	chan_pjsip: Use session for retrieving CHANNEL() information. The CHANNEL() dialplan function implementation for PJSIP allows querying of PJSIP specific information. This used the channel passed in to get the PJSIP session and associated information. It is possible for this channel to be masqueraded and end up as a different channel type by the time the information request is actually acted upon. This change retrieves the PJSIP session safely and accesses data from it (including channel). This provides a guarantee that the session and channel will not be altered when the request is being acted upon. ASTERISK-26673 Change-Id: I335e12b89e1820cafdd92b3e7526b8ba649eb7e6	9 years ago
Richard Mudgett	e4d4d9b412	chan_rtp.c: Fix uninitialized memory crash. unicast_rtp_request() could pass an uninitialized 'us' parameter to ast_ouraddrfor(). If ast_ouraddrfor() returns an error then the 'us' parameter may not get initialized. Thus when the code tries to save the 'us' parameter to the local address we could try to copy a ridiculous sized memory buffer and segfault. * Made pass an initialized 'us' parameter to ast_ouraddrfor() and abort the UnicastRTP channel request if it fails. ASTERISK-26672 Change-Id: I1ef7a7c09f4da4f15dcb6de660d2bcac5f2a95c0	9 years ago
Joshua Colp	3feb2a4b1c	Merge "chan_dahdi.c: Fix bounds check regression." into 14	9 years ago
Corey Farrell	767d569f76	chan_sip: Reorder unload_module to deal with stuck TCP threads. In some situations TCP threads may become frozen. This creates the possibility that Asterisk could segfault if they become unfrozen after chan_sip has been dlclose'd. This reorders the unload_module process to allow abort if threads do not exit within 5 seconds. High level order as follows: 1) Unregister from the core to stop new requests. 2) Signal threads to stop 3) Clear config based tables (but do not free the table itself). 4) Verify that threads have shutdown, cancel unload if not. 5) Clean all remaining resources. ASTERISK-26586 Change-Id: Ie23692041d838fbd35ece61868f4c640960ff882	9 years ago
Richard Mudgett	0d3f6e903b	chan_dahdi.c: Fix bounds check regression. Caused by ASTERISK-25494 Change-Id: I1fc408c1a083745ff59da5c4113041bbfce54bcb	9 years ago
Joshua Colp	e5bf133882	Merge "Fix typo in chan_sip" into 14	9 years ago
Joshua Colp	5231dd5a12	Merge "Small code cleanup in chan_sip" into 14	9 years ago
Badalyan Vyacheslav	ec7d86c90f	chan_sip: Delete unneeded check P is always true. We check it before Change-Id: Iee61cda002a9f61aee26b9f66c5f9b59e3389efb	9 years ago
Badalyan Vyacheslav	c15228ff84	Small code cleanup in chan_sip The conditional expressions of the 'if' operators situated alongside each other are identical. Change-Id: I2cf7c317b106ec14440c7f1b5dcfbf03639f748a	9 years ago
Badalyan Vyacheslav	59457d39ef	Fix typo in chan_sip The conditional expressions of the 'if' operators situated alongside each other are identical. Change-Id: I652b6dcddb3be007e669a6aa8107edb31a1ddafb	9 years ago
Walter Doekes	98a82190fb	chan_sip: Do not allow non-SP/HTAB between header key and colon. RFC says SIP headers look like: HCOLON = ( SP / HTAB ) ":" SWS SWS = [LWS] ; sep whitespace LWS = [WSP CRLF] 1WSP ; linear whitespace WSP = SP / HTAB ; from rfc2234 chan_sip implemented this: HCOLON = ( LOWCTL / SP ) ":" SWS LOWCTL = %x00-1F ; CTL without DEL This discrepancy meant that SIP proxies in front of Asterisk with chan_sip could pass on unknown headers with \x00-\x1F in them, which would be treated by Asterisk as a different (known) header. For example, the "To\x01:" header would gladly be forwarded by some proxies as irrelevant, but chan_sip would treat it as the relevant "To:" header. Those relying on a SIP proxy to scrub certain headers could mistakenly get unexpected and unvalidated data fed to Asterisk. This change fixes so chan_sip only considers SP/HTAB as valid tokens before the colon, making it agree on the headers with other speakers of SIP. ASTERISK-26433 #close AST-2016-009 Change-Id: I78086fbc524ac733b8f7f78cb423c91075fd489b	9 years ago
Joshua Colp	81dc839dab	Merge "res_pjsip/chan_sip: Advertise 'ws' in the SIP URI transport parameter" into 14	9 years ago
Joshua Colp	12517ad1f3	Merge "chan_pjsip: fix switching sending codec when asymmetric_rtp_codec=no" into 14	9 years ago
Alexei Gradinari	d49fbc5f4e	chan_pjsip: fix switching sending codec when asymmetric_rtp_codec=no The sending codec is switched to the receiving codec and then is switched back to the best native codec on EVERY receiving RTP packets. This is because after call of ast_channel_set_rawwriteformat there is call of ast_set_write_format which calls set_format which sets rawwriteformat to the best native format. This patch adds a new function ast_set_write_format_path which set specific write path on channel and uses this function to switch the sending codec. ASTERISK-26603 #close Change-Id: I5b7d098f8b254ce8f45546e6c36e5d324737f71d	9 years ago
Matt Jordan	9fe1a62f7f	res_pjsip/chan_sip: Advertise 'ws' in the SIP URI transport parameter Per RFC 7118 5.2, the SIP URI 'transport' parameter should advertise 'ws' when WebSockets are to be used as the transport. This applies to both secure and insecure WebSockets. There were two bugs in Asterisk with respect to this: (1) The most egregious occurs in res_pjsip. There, we advertise 'ws' for insecure websockets and 'wss' for secure websockets. While this would seem to make sense - since 'WS' and 'WSS' are used for the Via Transport parameter - this is not the case for the SIP URI. This patch corrects that by registering the secure websockets with pjproject using the shorthand 'WS', and by returning 'ws' when asked for the transport parameter. Note that in pjproject, it is perfectly valid to have multiple transports use the same shorthand. (2) In chan_sip, we return an upper-case version of the transport 'WS' instead of 'ws'. Since we should be strict in what we send and liberal in what we accept (within reason), this patch lower-cases the transport before appending it to the parameter. ASTERISK-24330 #close Reported by: cervajs, Inaki Baz Castillo Change-Id: Iff77b645f8cc3b7cd35168a6676c26b147f22f42	9 years ago
Michael Kuron	cbdf9cc948	chan_sip: Fix segfault during module unload If a TCP/TLS connection was pending (not accepted and not timed out) during unload of chan_sip, Asterisk would segfault when trying to send a signal to a thread whose thread ID hadn't been recorded yet. This commit fixes that by recording the thread ID before calling the blocking connect() syscall. This was a regression introduced by `776a14386a`. The above wasn't enough to fix the segfault, which was now delayed to the point where connect() timed out. Therefore, it was necessary to also remove the SA_RESTART flag from the SIGURG sigaction so that pthread_kill() could be used to interruput the connect() syscall. This was a regression introduced by `5d313f51b9`. ASTERISK-26586 #close Change-Id: I76fd9d47d56e4264e2629bce8ec15fecba673e7b	9 years ago
Igor Goncharovskiy	ba09e7a23f	Fix closing rtp ports after call finished in chan_unistim. Fix ASTERISK-26565 by adding ast_rtp_instance_stop before rtp instance destroy for chan_unistim. Also several fixes for displayed text translation. Change-Id: If42a03eea09bd1633471406bdc829cf98bf6affc	9 years ago
Kevin Harwell	ac82b40bff	Revert "chan_sip: Fix lastrtprx always updated" This reverts commit `93332cb1d0`. Unfortunately, the aforementioned commit caused a regression (incoming calls would eventually disconnect). Thus it is being removed. ASTERISK-26523 #close ASTERISK-25270 Change-Id: Ibf5586adc303073a8eac667a4cbfdb6be184a64d	9 years ago
Sebastian Gutierrez	1012c28437	chan_sip: add missing account code Added missing account to AMI event of sip show peers ASTERISK-26176 #close Change-Id: Ieb6c2c80a838a1b59c82103eba4c63ba238dc482	9 years ago
Grachev Sergey	782dfa09a8	chan_sip: Incorrect display option Outbound reg. retry 403 If in sip.conf (general section) set option register_retry_403=no, the command "sip show settings" return value: Outbound reg. retry 403:0 If in sip.conf (general section) set option register_retry_403=yes, the command "sip show settings" return value: Outbound reg. retry 403:-1 * In static char "sip show settings" for "Outbound.reg. retry 403" option use AST_CLI_YESNO ASTERISK-26476 #close Change-Id: I3c14272f05f1067bd2aeaa8b3ef9cf8fcb12dcf9	9 years ago
Joshua Colp	2a6d5fb271	Merge "pjsip: Fix a few media bugs with reinvites and asymmetric payloads." into 14	9 years ago
Joshua Colp	791d2319ce	pjsip: Fix a few media bugs with reinvites and asymmetric payloads. When channel format changes occurred as a result of an RTP re-negotiation the bridge was not informed this had happened. As a result the bridge technology was not re-evaluated and the channel may have been in a bridge technology that was incompatible with its formats. The bridge is now unbridged and the technology re-evaluated when this occurs. The chan_pjsip module also allowed asymmetric codecs for sending and receiving. This did not work with all devices and caused one way audio problems. The default has been changed to NOT do this but to match the sending codec to the receiving codec. For users who want asymmetric codecs an option has been added, asymmetric_rtp_codec, which will return chan_pjsip to the previous behavior. The codecs returned by the chan_pjsip module when queried by the bridge_native_rtp module were also not reflective of the actual negotiated codecs. The nativeformats are now returned as they reflect the actual negotiated codecs. ASTERISK-26423 #close Change-Id: I6ec88c6e3912f52c334f1a26983ccb8f267020dc	9 years ago
Alexei Gradinari	3e040685c7	chan_pjsip: segfault on already disconnected session On heavy loaded system the TCP/TLS incoming calls could be disconnected by pjproject while these calls are being processed by asterisk. This patch uses functions pjsip_inv_add_ref/pjsip_inv_dec_ref to inform pjproject that an INVITE session is in use. ASTERISK-26482 #close Change-Id: Ia2e3e2f75358cdb530252a9ce158af3d5d9fdf33	9 years ago
zuul	e2cf981a1c	Merge "chan_sip: Support nat=auto_comedia or nat=force_rport,auto_comedia." into 14	9 years ago
Joshua Colp	e285643a9c	Merge "chan_rtp: Set a sane default rtp engine for unicast." into 14	9 years ago
Moises Silva	3135b15a54	chan_rtp: Set a sane default rtp engine for unicast. ASTERISK-26439 Change-Id: I7f5ee2eeba8906e9ecb3293dbe3a747770bb5011	9 years ago
Michael Kuron	60c84bbad5	chan_sip: Only send video on outgoing channel if incoming channel supports it Previously, the settings videosupport=always and videosupport=yes behaved identically and unconditionally caused a video offer to be sent in the SDP on an outgoing call. This was a regression introduced with commit `5a1d90e1fb` in Asterisk 1.6.1. This commit restores correct behavior: videosupport=always causes a video offer to be sent unconditionally, while videosupport=yes will only offer video on an outbound channel if the incoming channel it is bridged to also supports video. That way, the device receiving the outgoing call can display the correct user interface elements for audio or video and will not unnecessarily show a blank video window on an audio-only call. ASTERISK-17470 #close Change-Id: I782f4409d436114dbc97061c3570c0cd24f7c3ae	9 years ago
Alexander Traud	ca1b197765	chan_sip: Support nat=auto_comedia or nat=force_rport,auto_comedia. In the SIP channel driver chan_sip, auto_comedia was expected to be used in tandem with auto_force_rport. Or stated differently: Only when auto_force_rport was chosen (the default), auto_comedia worked. This change allows auto_comedia to be set independently of the state of (auto_)force_rport. For example, nat=force_rport,auto_comedia is useful for IPv4/IPv6 Dual Stack deployments when IPv6 clients are behind a Firewall. ASTERISK-26457 #close Change-Id: Ib29d66c6dbb61648e371e01fc36c6978ddae5bc2	9 years ago
Alexander Traud	16d9d67329	chan_sip: Honor support of Symmetric Response (rport) for SIP requests. In the SIP channel driver chan_sip, the default is "auto_force_rport". When no NAT was detected, for example in case of IPv6, Asterisk uses the IP address from the headers within the SIP-REGISTER for subsequent SIP signaling. When the remote party specifies support for Symmetric Response (RFC 3581) via the parameter "rport", Asterisk should not extract the port from the SIP headers but reuse the port of the transport. This did not happen because of a typo. ASTERISK-26438 #close Change-Id: If6e7891848aaf96666dee5305695f7c6667cd5a6	9 years ago
zuul	0b62db30ce	Merge "chan_sip: Resolve externhost not to IPv6; instead go for IPv4." into 14	9 years ago
zuul	f029ba6564	Merge "channels/chan_pjsip: fix HANGUPCAUSE function bug." into 14	9 years ago
Aaron An	7bcb1fc940	channels/chan_pjsip: fix HANGUPCAUSE function bug. HANGUPCAUSE not return 'SIP 200 Ok' when dialed channel answered. This patch change the call order of ast_queue_control_data and ast_queue_control in chan_pjsip_incoming_response. ASTERISK-26396 #close Reported by: AaronAn Tested by: AaronAn Change-Id: Ide2d31723d8d425961e985de7de625694580be61	9 years ago
Alexander Traud	175975e994	chan_sip: Resolve externhost not to IPv6; instead go for IPv4. For the channel driver chan_sip, you specify externhost=example.com in sip.conf when your Asterisk is behind a NAT and your IP address is assigned dynamically. Or stated differently: You do not have a static IP address to use "externaddr" directly. This NAT support is quite handy but just about IPv4. Previously, Asterisk resolved "externhost" to any IP version. When the first DNS answer resolved to an IPv6, Asterisk sent an IPv6 in SIP/SDP for origin (o=) and connection (c=). This happened in outgoing SIP-REGISTER and while answering SIP-INVITE. If the remote peer is IPv4-only, it might not handle o=/c= with an IPv6. This change makes sure, no IPv6 is resolved anymore for "externhost". ASTERISK-18232 #close Reported by: Jacek Kowalski Tested by: Alexander Traud patches: changes.patch submitted by Alessandro Crespi Change-Id: If68eedbeff65bd1c1d8a9ed921c02ba464b32dac	9 years ago
George Joseph	d64edafa63	chan_sip: Address runaway when realtime peers subscribe to mailboxes Users upgrading from asterisk 13.5 to a later version and who use realtime with peers that have mailboxes were experiencing runaway situations that manifested as a continuous stream of taskprocessor congestion errors, memory leaks and an unresponsive chan_sip. A related issue was that setting rtcachefriends=no NEVER worked in asterisk 13 (since the move to stasis). In 13.5 and earlier, when a peer tried to register, all of the stasis threads would block and chan_sip would again become unresponsive. After 13.5, the runaway would happen. There were a number of causes... * mwi_event_cb was (indirectly) calling build_peer even though calls to mwi_event_cb are often caused by build_peer. * In an effort to prevent chan_sip from being unloaded while messages were still in flight, destroy_mailboxes was calling stasis_unsubscribe_and_join but in some cases waited forever for the final message. * add_peer_mailboxes wasn't properly marking the existing mailboxes on a peer as "keep" so build_peer would always delete them all. * add_peer_mwi_subs was unsubscribing existing mailbox subscriptions then just creating them again. All of this was causing a flood of subscribes and unsubscribes on multiple threads all for the same peer and mailbox. Fixes... * add_peer_mailboxes now marks mailboxes correctly and build_peer only deletes the ones that really are no longer needed by the peer. * add_peer_mwi_subs now only adds subscriptions marked as "new" instead of unsubscribing and resubscribing everything. It also adds the peer object's address to the mailbox instead of its name to the subscription userdata so mwi_event_cb doesn't have to call build_peer. With these changes, with rtcachefriends=yes (the most common setting), there are no leaks, locks, loops or crashes at shutdown. rtcachefriends=no still causes leaks but at least it doesn't lock, loop or crash. Since making rtcachefriends=no work wasnt in scope for this issue, further work will have to be deferred to a separate patch. Side fixes... * The ast_lock_track structure had a member named "thread" which gdb doesn't like since it conflicts with it's "thread" command. That member was renamed to "thread_id". ASTERISK-25468 #close Change-Id: I07519ef7f092629e1e844f855abd279d6475cdd0	9 years ago
Steve Davies	58f41ebf93	chan_sip: Fix session timeout on retransmit of non-UDP packets Change-Id I1cd33453c77c56c8e1394cd60a6f17bb61c1d957 Enable Session-Timers for SIP over TCP (and TLS) also disables SIP retransmits in chan_sip for non-UDP connections, allowing the TCP layer to handle the retransmits. Unfortunately, this caused sessions to be terminated with a retransmit timeout becasue it stopped at the point of the first retrans call. This patch waits for the 64*T1 timer to expire instead. ASTERISK-19968 Change-Id: I844f26801aada10bc94e9bebe6e151f0a8443204 (cherry picked from commit `98e42cc662`)	9 years ago
Alexander Traud	b3802e68b8	chan_sip: Enable Session-Timers for SIP over TCP (and TLS). Asterisk defaults to timers=accept/refresher=uas. In that scenario, only in that scenario, Sessions-Timers (RFC 4028) had no effect via TCP. This change enables Session-Timers for SIP over TCP (and for SIP over TLS). However with longer international calls via TCP, the SIP channel might break, because all hops on the Internet route must stay online (have not a single power outage, for example). Therefore with Session-Timers enabled (which are enabled at default), you might see dropped calls. Consequently even with this change, you might be better-off going for session-timers=refuse in your sip.conf. ASTERISK-19968 #close Change-Id: I1cd33453c77c56c8e1394cd60a6f17bb61c1d957 (cherry picked from commit `66c9dfb272`)	9 years ago
Walter Doekes	52e6d03401	chan_sip: Allow target refresh (Contact update) on re-INVITE. Previously, the Contact was stored only on initial INVITE and on any 18X and 200. That meant that after re-INVITEs from us the Contact could get updated, but after re-INVITEs from the peer, it did not. This changeset fixes this inconsistency, properly allowing target refreshes through re-INVITES (RFC3261, 12.2). If your strictrtp setting allows it, this change allows you to switch the source IP of a connected/calling device mid-call with a simple re-INVITE from the new IP. ASTERISK-26358 #close Change-Id: Ibb8512054ab27c8c3d2514022568fde943bf2435	9 years ago
Joshua Colp	d7d22a2be5	chan_sip: Don't allocate new RTP instances on top of old ones. In some scenarios dialog_initialize_rtp can be called multiple times on the same dialog. This can cause RTP instances to be leaked along with multiple file descriptors for each instance. This change makes it so the existing RTP instances are destroyed and not overwritten, stopping the memory leak. ASTERISK-26272 #close patches: ASTERISK-26272-13.patch submitted by Corey Farrell (license 5909) Change-Id: Id529de1184c68f2f4d254ab41a1f458dafdb5f73	9 years ago
Walter Doekes	9b59ebee2f	chan_sip: Don't refuse calls with "optional crypto"; fall back to RTP. Certain SNOM phones send so-called "optional crypto" in their SDP body. Regular SRTP setup looks like this: m=audio 64620 RTP/SAVP 8 0 9 99 3 18 4 101 a=crypto:1 AES_CM_128_HMAC_SHA1_32 inline:... SNOM-style "optional crypto" looks like this: m=audio 61438 RTP/AVP 8 0 9 99 3 18 4 101 a=crypto:1 AES_CM_128_HMAC_SHA1_32 inline:... A crypto line is supplied, but the m-line does not have SAVP. When res_srtp.so is not loaded, then chan_sip.so treats the optional crypto as regular RTP, but when res_srtp.so is loaded, it refuses the incoming call with the following message: WARNING: process_sdp: Failed to receive SDP offer/answer with required SRTP crypto attributes for audio For platforms that want to start providing SRTP this presents a compatibility problem. This changeset lets chan_sip handle the SDP as if no crypto-line was supplied: i.e. accept the call as regular RTP, just like it did before res_srtp was loaded. Now you'll get this informative warning instead: WARNING: Ignoring crypto attribute in SDP because RTP transport is insecure ASTERISK-23989 #close Reported by: Olle Johansson Change-Id: I91a15ae05a0296e398d6b65f53bb11afde1d80e2	9 years ago
Kevin Harwell	d2bee6b535	res_format_attr_g729: Add annexb=no format parameter to SDPs Historically, Asterisk has always specified annexb=no for the g729 format. However, when using res_pjsip no format attribute was specified. This patch makes it so the SDP now contains a format attribute line with annexb=no. Note, that this means only g729a is negotiated. Even for pass through support. According to rfc7261 the type of annex used (a or b) is dependent upon the answerer. However, Asterisk being a back to back user agent makes this tricky to support at this time, thus we only allow annex 'a' for now. ASTERISK-26228 #close patches: res_format_attr_g729.c submitted by Jason Parker (license 4993) Change-Id: I76bc20cc0a01af01536e9915afef319c269c22d0	9 years ago
Corey Farrell	ba91710bc4	Refactor usage pattern of xmldoc info tag. This updates func_channel.c and main/message.c to use a generic xpointer include instead of including info from each channel driver. Now the name attribute of info is CHANNEL or CHANNEL_EXAMPLES to be included in documentation for func_channel. Setting the name attribute of info to MessageToInfo or MessageFromInfo causes it to be included in the MessageSend application and AMI action. Change-Id: I89fd8276a3250824241a618009714267d3a8d1ea	9 years ago
zuul	a50303cfc4	Merge "chan_sip: Fix lastrtprx always updated" into 14	9 years ago
cjack	19e323a6aa	chan_sip: Fix lastrtprx always updated Packets are read regulary, when there is no data in buffer fr->frametype is AST_FRAME_NULL. There was no check of frametype and lastrtprx always updated and, therefore, rtptimeout did not work at all. ASTERISK-25270 #close Change-Id: If3b5ca0dbb822582a86eb7d01dcae4e83448c41d	9 years ago
Matt Jordan	89dccb04bc	func_channel: Reorganize documentation * Following the example of the PJSIP channel driver, the channel technology specific documentation has been moved to the respective channel drivers that provide that functionality. This has the benefit of locating the documentation of items with those modules that provide it. * Examples of using the CHANNEL function for both standard items as well as for PJSIP have been added. * The 'max_forwards' standard item has been documented. Change-Id: Ifaa79a232c8ac99cf8da6ef6cc7815d398b1b79b	9 years ago
Matt Jordan	eec60dd773	channels/chan_pjsip: Add PJSIP_SEND_SESSION_REFRESH This patch adds a new PJSIP specific dialplan function, PJSIP_SEND_SESSION_REFRESH. When invoked on a PJSIP channel, the media session will be refreshed via either an UPDATE or re-INVITE request. When used in conjunction with the PJSIP_MEDIA_OFFER dialplan function, the formats in use on a PJSIP channel can be re-negotiated and changed dynamically after call setup. ASTERISK-26277 #close Change-Id: Ib98fe09ba889aafe26d58d32f0fd1323f8fd9b1b	9 years ago

1 2 3 4 5 ...

8329 Commits (de7ac8b596cbe149c85d013500290e189d6b0009)