5467 Commits (dbcb9582540bd75dca0128d70afa206df5e071be)

Author	SHA1	Message	Date
Mark Michelson	1db9e7886c	channel: Use frame deferral API for safe sleep. ... This is another case where manual frame deferral can be replaced with centralized routines instead. Change-Id: I42cdf205f8f29a7977e599751a57efbaac07c30e (cherry picked from commit d149c4b9e0)	9 years ago
Mark Michelson	0288fba2f0	autoservice: Use frame deferral API ... Rather than use manual frame deferral, just let the channel API do it for us. ASTERISK-26343 Change-Id: I688386f36e765dbc07be863943a43f26bd5eac49 (cherry picked from commit 8ba3e2fc27)	9 years ago
Mark Michelson	8d8323b142	AGI: Only defer frames when in an interception routine. ... AGI recently was modified to defer important frames. This was because when AGI was used in a connected line interception routine, the resulting connected line frame would end up getting discarded by the AGI. However, this caused bad behavior in other cases. Specifically, during a transfer, if someone attempted to manually set the Caller ID on a channel in an AGI, the deferred connected line frame would end up overwriting what had been manually set in the AGI. Since the initial issue was specific to interception routines, this change removes the manual frame deferral from AGI and instead uses the new frame deferral API in interception routines. ASTERISK-26343 #close Reported by Morton Tryfoss Change-Id: Iab7d39436d0ee99bfe32ad55ef91e9bd88db4208	9 years ago
Mark Michelson	4a8b1940b8	Add API for channel frame deferral. ... There are several places in Asterisk that have duplicated logic for deferring important frames until later. This commit adds a couple of API calls to facilitate this automatically. ast_channel_start_defer_frames(): Future reads of deferrable frames on this channel will be deferred until later. ast_channel_stop_defer_frames(): Any frames that have been deferred get requeued onto the channel. ASTERISK-26343 Change-Id: I3e1b87bc6796f222442fa6f7d1b6a4706fb33641	9 years ago
Joshua Colp	1be6c9d26a	Merge "stasis_recording/stored: remove calls to deprecated readdir_r function." into 14	9 years ago
Joshua Colp	a4d145e465	Merge "main/bridge_channel: Fix channel reference leak on video source" into 14	9 years ago
Joshua Colp	51ff8e3899	Merge "main/bridge: Add some verbose logging for video source changes" into 14	9 years ago
Matt Jordan	62d60c1f58	main/bridge_channel: Fix channel reference leak on video source ... When a channel is made the video source, the bridge holds a reference to it. Whenever the video source changes, that reference is released. However, a ref leak does occur if the channel leaves the bridge (such as being hung up) while it is the video source, as the bridge never releases the ref in such a case. This patch adds a line to the bridge_channel_internal_join routine such that, when a channel finishes its time in the bridge, it notifies the bridge via ast_bridge_remove_video_src that if it is a video source its reference should be released. ASTERISK-26555 #close Change-Id: I3a2f5238a9d2fc49c591f0e65199d782ab0be76a	9 years ago
Matt Jordan	be254aa8e3	main/bridge: Add some verbose logging for video source changes ... It's actually quite useful to see the source of a video stream change. This doesn't happen terribly often, even with talk detection - but when it does, it's nice to know which channel is now providing your video stream. As a verbose 5 level message, it shouldn't be terribly spammy or costly to have, and is 'lower level' then most other verbose messages that the bridge system emits. ASTERISK-26555 Change-Id: Ia1c20ecafa9670171fd38bddcf3beccae47fb15c	9 years ago
Kevin Harwell	25895897f8	stasis_recording/stored: remove calls to deprecated readdir_r function. ... The readdir_r function has been deprecated and should no longer be used. This patch removes the readdir_r dependency (replaced it with readdir) and also moves the directory search code to a more centralized spot (file.c) Also removed a strict dependency on the dirent structure's d_type field as it is not portable. The code now checks to see if the value is available. If so, it tries to use it, but defaults back to using the stats function if necessary. Lastly, for most implementations of readdir it *should* be thread-safe to make concurrent calls to it as long as different directory streams are specified. glibc falls into this category. However, since it is possible that there exist some implementations that are not safe, locking has been added for those other than glibc. ASTERISK-26412 ASTERISK-26509 #close Change-Id: Id8f54689b1e2873e82a09d0d0d2faf41964e80ba	9 years ago
Alexander Traud	6445f21caa	rtp_engine: Allow more than 32 dynamic payload types. ... Since adding all remaining rates of Signed Linear (ASTERISK-24274) and SILK (Gerrit 3136), only one RTP Payload Type is left in the dynamic range (96-127). RFC 3551 section 3 allows to reassign other ranges. Consequently, when the dynamic range is exhausted, you can go for "rtp_pt_dynamic = 35" (or 0) in asterisk.conf. This enables the range 35-63 (or 0-63) giving room for another 29 (or 64) payload types. ASTERISK-26311 #close Change-Id: I7bc96ab764bc30098a178b841cbf7146f9d64964	9 years ago
Joshua Colp	eaf04cb6d0	Merge "netsock.c: fix includes for HURD" into 14	9 years ago
Tzafrir Cohen	2897fc9ab0	netsock.c: fix includes for HURD ... ASTERISK-25070 Change-Id: I43bf94d2d36d3d8a8d0df40cd6c027d65a462814	9 years ago
Etienne Lessard	d9f9691d31	manager: Add documentation for NewConnectedLine event. ... The NewConnectedLine event has been added by commit fe7671f, but the documentation was missing. ASTERISK-26537 #close Change-Id: I7fc331f18caa28492da9303e576f70884ca8c9e6	9 years ago
Corey Farrell	39ba7aa91f	astobj2: Declare private variable data_size for AO2_DEBUG only. ... Every ao2 object contains storage for a private variable data_size, though the value is never read if AO2_DEBUG is disabled. This change makes the variable conditional, reducing memory usage. ASTERISK-26524 #close Change-Id: If859929e507676ebc58b0f84247a4231e11da07f	9 years ago
George Joseph	d84eaa46fa	pjproject_bundled: Fix issue where "/version.mak" wasn't found ... main/Makefile includes third-party/pjproject/build.mak but doesn't set PJDIR beforehand so "include $(PJDIR)/version.mak" evaluates to "/version.mak". Fix is to set PJDIR in main/Makefile before the include. Change-Id: I0f7c67d60209049056fe9c4b041bf0463aa95604	9 years ago
Corey Farrell	b76afa5e4f	Fix shutdown crash caused by modules being left open. ... It is only safe to run ast_register_cleanup callbacks when all modules have been unloaded. Previously these callbacks were run during graceful shutdown, making it possible to crash during shutdown. ASTERISK-26513 #close Change-Id: Ibfa635bb688d1227ec54aa211d90d6bd45052e21	9 years ago
Joshua Colp	1567ccfc82	Merge "ARI: Detect duplicate channel IDs" into 14	9 years ago
Pascal Cadotte Michaud	cb342298cd	typo: s/paranthesis/parenthesis/ in a comment ... Change-Id: I7c1f4eb051177ee22cbe97e063d4a3effe29be30	9 years ago
Mark Michelson	98378133c0	ARI: Detect duplicate channel IDs ... ARI and AMI allow for an explicit channel ID to be specified when originating channels. Unfortunately, there is nothing in place to prevent someone from using the same ID for multiple channels. Further complicating things, adding ID validation to channel allocation makes it impossible for ARI to discern why channel allocation failed, resulting in a vague error code being returned. The fix for this is to institute a new method for channel errors to be discerned. The method mirrors errno, in that when an error occurs, the caller can consult the channel errno value to determine what the error was. This initial iteration of the feature only introduces "unknown" and "channel ID exists" errors. However, it's possible to add more errors as needed. ARI uses this feature to determine why channel allocation failed and can return a 409 error during origination to show that a channel with the given ID already exists. ASTERISK-26421 Change-Id: Ibba7ae68842dab6df0c2e9c45559208bc89d3d06	9 years ago
snuffy	8e3aee2036	Fix issue with CLI not returning to prompt after running "features show" ... ASTERISK-26444 #close Change-Id: I91d645b7e6e5dba35f8c410df2be77a8c0e3acb8	9 years ago
zuul	1ecb4f9e2b	Merge "utils.c: Fix ast_set_default_eid for multiple platforms" into 14	9 years ago
Mark Michelson	0abc71dfd6	CDR: Alter destruction pattern for CDR chains. ... CDRs form chains. When the root of the chain is destroyed, it then unreferences the next CDR in the chain. That CDR is destroyed, and it then unreferences the next CDR in the chain. This repeats until the end of the chain is reached. While this typically does not cause any sort of problems, it is possible in strange scenarios for the CDR chain to grow way longer than expected. In such a scenario, the destruction pattern can result in a stack overflow. This patch fixes the problem by switching from a recursive pattern to an iterative pattern for destruction. When the root CDR is destroyed, it is responsible for iterating over the rest of the CDRs and unreferencing each one. Other CDRs in the chain, since they are not the root, will simply destroy themselves and be done. This causes the stack depth not to increase. ASTERISK-26421 #close Reported by Andrew Nagy Change-Id: I3ca90c2b8051f3b7ead2e0e43f60d2c18fb204b8	9 years ago
Alexander Traud	3938e3320f	cli: Auto-complete File not Module for core set debug. ... Since Asterisk 1.8, the command "core set debug" on the command-line interface asks not for a file (.c) but a module name. This change shows modules (.so) on the auto-completion via a tabulator or the question mark. Now, when you partially type a module name, TAB or ?, you get the correct candidiates. ASTERISK-26480 Change-Id: I1213f1dd409bd4ff8de08ad80cb0c73cafb1bae0	9 years ago
George Joseph	13aa241b9c	utils.c: Fix ast_set_default_eid for multiple platforms ... ast_set_default_eid was searching for ethX, emX, enoX, ensX and even pciD#U interface names. While this was a good attempt, it wasn't inclusive enough to capture interfaces like enp6s0 or ens6d1, etc. Rather than relying on interface names, we now simply find the first interface returned by the OS that has a hardware address and that address isn't all 0x00 or all 0xff. The code IS different for BSD, Solaris and Linux based on what method is available for enumerating interfaces. Tested on: FreeBSD9 CentOS6 Ubuntu14 Fedora24 I was unable to test on Solaris at this time but the code for Solaris is used elsewhere at Digium. Change-Id: Iaa6db87ca78a9a375e47d70e043ae08c1448cb72	9 years ago
Joshua Colp	839766f5e1	Merge "Audit ast_json_pack() calls for needed UTF-8 checks." into 14	9 years ago
Joshua Colp	465ba82ea2	Merge "json: Check party id name, number, subaddresses for UTF-8." into 14	9 years ago
Joshua Colp	6d5e11dc91	Merge "json: Add UTF-8 check call." into 14	9 years ago
Richard Mudgett	aba27b5a60	Audit ast_json_pack() calls for needed UTF-8 checks. ... Added needed UTF-8 checks before constructing json objects in various files for strings obtained outside the system. In this case string values from a channel driver's peer and not from the user setting channel variables. * aoc.c: Fixed type mismatch in s_to_json() for time and granularity json object construction. ASTERISK-26466 Reported by: Richard Mudgett Change-Id: Iac2d867fa598daba5c5dbc619b5464625a7f2096	9 years ago
Richard Mudgett	beae5022bf	json: Check party id name, number, subaddresses for UTF-8. ... * Updated unit test as ast_json_name_number() is now NULL tolerant. ASTERISK-26466 #close Reported by: Richard Mudgett Change-Id: I7d4e14194f8f81f24a1dc34d1b8602c0950265a6	9 years ago
Richard Mudgett	2433a9d0c0	json: Add UTF-8 check call. ... Since the json library does not make the check function public we recreate/copy the function in our interface module. ASTERISK-26466 Reported by: Richard Mudgett Change-Id: I36d3d750b6f5f1a110bc69ea92b435ecdeeb2a99	9 years ago
Richard Mudgett	b288b8b997	aoc.c: Whitespace cleanup ... * In s_to_json() removed unnecessary ast_json_ref() to ast_json_null() when creating the type json object. The ref is a noop. Change-Id: I2be8b836876fc2e34a27c161f8b1c53b58a3889a	9 years ago
zuul	357134fef1	Merge "audiohooks: Remove redundant codec translations when using audiohooks" into 14	9 years ago
zuul	dd6d6a55fe	Merge "astobj2: Add backtrace to log_bad_ao2." into 14	9 years ago
Michael Walton	4cf2d9f261	audiohooks: Remove redundant codec translations when using audiohooks ... The main frame read and write handlers in main/channel.c don't use the optimum placement in the processing flow for calling audiohooks callbacks, as far as codec translation is concerned. This change places the audiohooks callback code: * After the channel read translation if the frame is not linear before the translation, thereby increasing the chance that the frame is linear as required by audiohooks * Before the channel write translation if the frame is linear at this point This prevents the audiohooks code from instantiating additional translation paths to/from linear where a linear frame format is already available, saving valuable CPU cycles ASTERISK-26419 Change-Id: I6edd5771f0740e758e7eb42558b953f046c01f8f	9 years ago
Corey Farrell	2f2ef9b8a6	logger: Prevent output of verbose messages initiated from rasterisk. ... Remote asterisk consoles should only display verbose log messages created by the daemon. The first patch for ASTERISK-26410 caused a couple verbose messages to be printed when the rasterisk process ended. ASTERISK-26410 Change-Id: Ie2a1bb3753ad2724c0349ec1a336f52f7117b52a	9 years ago
Corey Farrell	d236973657	astobj2: Add backtrace to log_bad_ao2. ... * Compile __ast_assert_failed unconditionally. * Use __ast_assert_failed to log messages from log_bad_ao2 * Remove calls to ast_assert(0) that happen after log_bad_ao2 was run. Change-Id: I48f1af44b2718ad74a421ff75cb6397b924a9751	10 years ago
Corey Farrell	013414ca4b	logger: Output early verbose messages to console. ... Verbose messages should be printed to the console if the sublevel is less than option_verbose. This fix ensures the welcome message with copyright and license are printed at daemon and interactive rasterisk startup. ASTERISK-26410 #close Change-Id: Ia44235e30ec328aba92ea2c8a837b094e65c9a03	10 years ago
George Joseph	d64edafa63	chan_sip: Address runaway when realtime peers subscribe to mailboxes ... Users upgrading from asterisk 13.5 to a later version and who use realtime with peers that have mailboxes were experiencing runaway situations that manifested as a continuous stream of taskprocessor congestion errors, memory leaks and an unresponsive chan_sip. A related issue was that setting rtcachefriends=no NEVER worked in asterisk 13 (since the move to stasis). In 13.5 and earlier, when a peer tried to register, all of the stasis threads would block and chan_sip would again become unresponsive. After 13.5, the runaway would happen. There were a number of causes... * mwi_event_cb was (indirectly) calling build_peer even though calls to mwi_event_cb are often caused by build_peer. * In an effort to prevent chan_sip from being unloaded while messages were still in flight, destroy_mailboxes was calling stasis_unsubscribe_and_join but in some cases waited forever for the final message. * add_peer_mailboxes wasn't properly marking the existing mailboxes on a peer as "keep" so build_peer would always delete them all. * add_peer_mwi_subs was unsubscribing existing mailbox subscriptions then just creating them again. All of this was causing a flood of subscribes and unsubscribes on multiple threads all for the same peer and mailbox. Fixes... * add_peer_mailboxes now marks mailboxes correctly and build_peer only deletes the ones that really are no longer needed by the peer. * add_peer_mwi_subs now only adds subscriptions marked as "new" instead of unsubscribing and resubscribing everything. It also adds the peer object's address to the mailbox instead of its name to the subscription userdata so mwi_event_cb doesn't have to call build_peer. With these changes, with rtcachefriends=yes (the most common setting), there are no leaks, locks, loops or crashes at shutdown. rtcachefriends=no still causes leaks but at least it doesn't lock, loop or crash. Since making rtcachefriends=no work wasnt in scope for this issue, further work will have to be deferred to a separate patch. Side fixes... * The ast_lock_track structure had a member named "thread" which gdb doesn't like since it conflicts with it's "thread" command. That member was renamed to "thread_id". ASTERISK-25468 #close Change-Id: I07519ef7f092629e1e844f855abd279d6475cdd0	10 years ago
zuul	d4422a2253	Merge "core: Ensure presencestate subtype and message are NULL." into 14	10 years ago
zuul	c526e3d94c	Merge "logger: Simplify ast_callid handling code." into 14	10 years ago
Joshua Colp	64df75b02c	core: Ensure presencestate subtype and message are NULL. ... When retrieving presence state information there is no guarantee that the subtype and message passed in are set to NULL. This change ensures they are. ASTERISK-26397 #close Change-Id: If38cd730e409e9a9b6eb9adef6591d15a9e61f86	10 years ago
zuul	79070e486d	Merge "logger: Always enable verbose for console channel." into 14	10 years ago
zuul	6b8de13946	Merge "logger: Fix default console settings." into 14	10 years ago
zuul	5325e7a500	Merge "core: Fix LOW_MEMORY missing symbol ast_pbx_uuid_get." into 14	10 years ago
zuul	7f8d570c8d	Merge "asterisk.c: Non-root users also get the astcanary after core restart." into 14	10 years ago
Corey Farrell	ba3269f12b	core: Fix LOW_MEMORY missing symbol ast_pbx_uuid_get. ... Move the function outside the conditional block that excludes LOW_MEMORY. ASTERISK-26273 #close Change-Id: Ic290fa128222c410c3531107e30efacabc8493b4	10 years ago
zuul	381cafe335	Merge "sd_notify (systemd status notifications) support" into 14	10 years ago
Corey Farrell	1a7d39818f	logger: Simplify ast_callid handling code. ... Routines responsible for managing ast_callid's are overly complicated. This is left-over code from when ast_callid was an AO2 object. Now that it is an integer the code can be reduced. ast_callid handler code no longer prints it's own error message upon failure to allocate threadstorage as ast_calloc would have already printed a message. Debug messages that were printed when TEST_FRAMEWORK was enabled have been also been removed. Change-Id: I65a768a78dc6cf3cfa071e97f33ce3dce280258e	10 years ago
Corey Farrell	1b61a21757	logger: Always enable verbose for console channel. ... Previous versions of Asterisk did not require verbose to be specified in logger.conf for the console channel, if it was requested by command line or asterisk.conf it just worked. This change causes Asterisk to always enable verbose in the console channel level mask. Verbose is displayed on consoles if requested by command line, option_verbose or 'core set verbose'. This also delays initialization of the logger until after threadstorage is initialized. Initializing too early can cause messages to be printed multiple times to the console (stdout). ASTERISK-26391 #close Change-Id: I52187d67c2fcb3efd5561bf04b3e5e23e5ee8a04	10 years ago