770 Commits (db79bcb82f15f9ef60dd68ab6acfeda383e4d3e1)

Author	SHA1	Message	Date
Sean Bright	d856a3e2ef	alembic: Drop redundant voicemail_messages index. ... The `voicemail_messages_dir` index is a left prefix of the table's primary key and therefore unnecessary.	7 months ago
Sean Bright	73836c7d97	res_pjsip_pubsub: Persist subscription 'generator_data' in sorcery ... Fixes #895	7 months ago
Sean Bright	a006e6a676	alembic: Make 'revises' header comment match reality.	8 months ago
Ben Ford	fb0e46e464	channel: Add multi-tenant identifier. ... This patch introduces a new identifier for channels: tenantid. It's a stringfield on the channel that can be used for general purposes. It will be inherited by other channels the same way that linkedid is. You can set tenantid in a few ways. The first is to set it in the dialplan with the Set and CHANNEL functions: exten => example,1,Set(CHANNEL(tenantid)=My tenant ID) It can also be accessed via CHANNEL: exten => example,2,NoOp(CHANNEL(tenantid)) Another method is to use the new tenantid option for pjsip endpoints in pjsip.conf: [my_endpoint] type=endpoint tenantid=My tenant ID This is considered the best approach since you will be able to see the tenant ID as early as the Newchannel event. It can also be set using set_var in pjsip.conf on the endpoint like setting other channel variable: set_var=CHANNEL(tenantid)=My tenant ID Note that set_var will not show tenant ID on the Newchannel event, however. Tenant ID has also been added to CDR. It's read-only and can be accessed via CDR(tenantid). You can also get the tenant ID of the last channel communicated with via CDR(peertenantid). Tenant ID will also show up in CEL records if it has been set, and the version number has been bumped accordingly. Fixes: #740 UserNote: tenantid has been added to channels. It can be read in dialplan via CHANNEL(tenantid), and it can be set using Set(CHANNEL(tenantid)=My tenant ID). In pjsip.conf, it is recommended to use the new tenantid option for pjsip endpoints (e.g., tenantid=My tenant ID) so that it will show up in Newchannel events. You can set it like any other channel variable using set_var in pjsip.conf as well, but note that this will NOT show up in Newchannel events. Tenant ID is also available in CDR and can be accessed with CDR(tenantid). The peer tenant ID can also be accessed with CDR(peertenantid). CEL includes tenant ID as well if it has been set. UpgradeNote: A new versioned struct (ast_channel_initializers) has been added that gets passed to __ast_channel_alloc_ap. The new function ast_channel_alloc_with_initializers should be used when creating channels that require the use of this struct. Currently the only value in the struct is for tenantid, but now more fields can be added to the struct as necessary rather than the __ast_channel_alloc_ap function. A new option (tenantid) has been added to endpoints in pjsip.conf as well. CEL has had its version bumped to include tenant ID.	9 months ago
George Joseph	e6633e8fdd	ast-db-manage: Remove duplicate enum creation ... Remove duplicate creation of ast_bool_values from 2b7c507d7d12_add_queue_log_option_log_restricted_.py. This was causing alembic upgrades to fail since the enum was already created in fe6592859b85_fix_mwi_subscribe_replaces_.py back in 2018. Resolves: #797	10 months ago
Alexei Gradinari	07aa0ffe6a	app_queue: Add option to not log Restricted Caller ID to queue_log ... Add a queue option log-restricted-caller-id to strip the Caller ID when storing the ENTERQUEUE event in the queue log if the Caller ID is restricted. Resolves: #765 UpgradeNote: Add a new column to the queues table: queue_log_option_log_restricted ENUM('0','1','off','on','false','true','no','yes') to control whether the Restricted Caller ID will be stored in the queue log. UserNote: Add a Queue option log-restricted-caller-id to control whether the Restricted Caller ID will be stored in the queue log. If log-restricted-caller-id=no then the Caller ID will be stripped if the Caller ID is restricted.	10 months ago
George Joseph	85241bd229	Revert "res_pjsip_endpoint_identifier_ip: Add endpoint identifier transport address." ... This reverts PR #602 Resolves: #GHSA-qqxj-v78h-hrf9	11 months ago
Sean Bright	79210720bc	alembic: Correct NULLability of PJSIP id columns. ... Fixes #695	1 year ago
Sperl Viktor	0ab4a5ef6b	res_pjsip_endpoint_identifier_ip: Add endpoint identifier transport address. ... Add a new identify_by option to res_pjsip_endpoint_identifier_ip called 'transport' this matches endpoints based on the bound ip address (local) instead of the 'ip' option, which matches on the source ip address (remote). UserNote: set identify_by=transport for the pjsip endpoint. Then use the existing 'match' option and the new 'transport' option of the identify. Fixes: #672	1 year ago
Sperl Viktor	895ab9d798	res_pjsip_endpoint_identifier_ip: Endpoint identifier request URI ... Add ability to match against PJSIP request URI. UserNote: this new feature let users match endpoints based on the indound SIP requests' URI. To do so, add 'request_uri' to the endpoint's 'identify_by' option. The 'match_request_uri' option of the identify can be an exact match for the entire request uri, or a regular expression (between slashes). It's quite similar to the header identifer. Fixes: #599	1 year ago
Joshua Elson	c8ab570c6f	Implement Configurable TCP Keepalive Settings in PJSIP Transports ... This commit introduces configurable TCP keepalive settings for both TCP and TLS transports. The changes allow for finer control over TCP connection keepalives, enhancing stability and reliability in environments prone to connection timeouts or where intermediate devices may prematurely close idle connections. This has proven necessary and has already been tested in production in several specialized environments where access to the underlying transport is unreliable in ways invisible to the operating system directly, so these keepalive and timeout mechanisms are necessary. Fixes #657	1 year ago
Sean Bright	63168983aa	alembic: Fix compatibility with SQLAlchemy 2.0+. ... SQLAlchemy 2.0 changed the way that commits/rollbacks are handled causing the final `UPDATE` to our `alembic_version_<whatever>` tables to be rolled back instead of committed. We now use one connection to determine which `alembic_version_<whatever>` table to use and another to run the actual migrations. This prevents the erroneous rollback. This change is compatible with both SQLAlchemy 1.4 and 2.0.	1 year ago
Sean Bright	e5e9692738	res_pjsip: Fix alembic downgrade for boolean columns. ... When downgrading, ensure that we don't touch columns that didn't actually change during upgrade.	1 year ago
Sean Bright	e0d3e9da23	alembic: Quote new MySQL keyword 'qualify.' ... Fixes #651	1 year ago
Sean Bright	6291ddaf90	res_pjsip: Use consistent type for boolean columns. ... This migrates the relevant schema objects from the `('yes', 'no')` definition to the `('0', '1', 'off', 'on', 'false', 'true', 'yes', 'no')` one. Fixes #617	1 year ago
George Joseph	628f8d7a43	Stir/Shaken Refactor ... Why do we need a refactor? The original stir/shaken implementation was started over 3 years ago when little was understood about practical implementation. The result was an implementation that wouldn't actually interoperate with any other stir-shaken implementations. There were also a number of stir-shaken features and RFC requirements that were never implemented such as TNAuthList certificate validation, sending Reason headers in SIP responses when verification failed but we wished to continue the call, and the ability to send Media Key(mky) grants in the Identity header when the call involved DTLS. Finally, there were some performance concerns around outgoing calls and selection of the correct certificate and private key. The configuration was keyed by an arbitrary name which meant that for every outgoing call, we had to scan the entire list of configured TNs to find the correct cert to use. With only a few TNs configured, this wasn't an issue but if you have a thousand, it could be. What's changed? * Configuration objects have been refactored to be clearer about their uses and to fix issues. * The "general" object was renamed to "verification" since it contains parameters specific to the incoming verification process. It also never handled ca_path and crl_path correctly. * A new "attestation" object was added that controls the outgoing attestation process. It sets default certificates, keys, etc. * The "certificate" object was renamed to "tn" and had it's key change to telephone number since outgoing call attestation needs to look up certificates by telephone number. * The "profile" object had more parameters added to it that can override default parameters specified in the "attestation" and "verification" objects. * The "store" object was removed altogther as it was never implemented. * We now use libjwt to create outgoing Identity headers and to parse and validate signatures on incoming Identiy headers. Our previous custom implementation was much of the source of the interoperability issues. * General code cleanup and refactor. * Moved things to better places. * Separated some of the complex functions to smaller ones. * Using context objects rather than passing tons of parameters in function calls. * Removed some complexity and unneeded encapsuation from the config objects. Resolves: #351 Resolves: #46 UserNote: Asterisk's stir-shaken feature has been refactored to correct interoperability, RFC compliance, and performance issues. See https://docs.asterisk.org/Deployment/STIR-SHAKEN for more information. UpgradeNote: The stir-shaken refactor is a breaking change but since it's not working now we don't think it matters. The stir_shaken.conf file has changed significantly which means that existing ones WILL need to be changed. The stir_shaken.conf.sample file in configs/samples/ has quite a bit more information. This is also an ABI breaking change since some of the existing objects needed to be changed or removed, and new ones added. Additionally, if res_stir_shaken is enabled in menuselect, you'll need to either have the development package for libjwt v1.15.3 installed or use the --with-libjwt-bundled option with ./configure.	1 year ago
Flole998	775352ee6c	res_pjsip_outbound_registration.c: Add User-Agent header override ... This introduces a setting for outbound registrations to override the global User-Agent header setting. Resolves: #515 UserNote: PJSIP outbound registrations now support a per-registration User-Agent header	1 year ago
Mike Bradeen	0668e5494a	app_voicemail_odbc: remove macrocontext from voicemail_messages table ... When app_macro was deprecated, the macrocontext column was removed from the INSERT statement but the binds were not renumbered. This broke the insert. This change removes the macrocontext column via alembic and re-numbers the existing columns in the INSERT. Fixes: #527 UserNote: The fix requires removing the macrocontext column from the voicemail_messages table in the voicemail database via alembic upgrade. UpgradeNote: The fix requires that the voicemail database be upgraded via alembic. Upgrading to the latest voicemail database via alembic will remove the macrocontext column from the voicemail_messages table.	1 year ago
George Joseph	1a0acabb8a	ast_coredumper: Increase reliability ... Instead of searching for the asterisk binary and the modules in the filesystem, we now get their locations, along with libdir, from the coredump itself... For the binary, we can use `gdb -c <coredump> ... "info proc exe"`. gdb can print this even without having the executable and symbols. Once we have the binary, we can get the location of the modules with `gdb ... "print ast_config_AST_MODULE_DIR` If there was no result then either it's not an asterisk coredump or there were no symbols loaded. Either way, it's not usable. For libdir, we now run "strings" on the note0 section of the coredump (which has the shared library -> memory address xref) and search for "libasteriskssl|libasteriskpj", then take the dirname. Since we're now getting everything from the coredump, it has to be correct as long as we're not crossing namespace boundaries like running asterisk in a docker container but trying to run ast_coredumper from the host using a shared file system (which you shouldn't be doing). There is still a case for using --asterisk-bin and/or --libdir: If you've updated asterisk since the coredump was taken, the binary, libraries and modules won't match the coredump which will render it useless. If you can restore or rebuild the original files that match the coredump and place them in a temporary directory, you can use --asterisk-bin, --libdir, and a new --moddir option to point to them and they'll be correctly captured in a tarball created with --tarball-coredumps. If you also use --tarball-config, you can use a new --etcdir option to point to what normally would be the /etc/asterisk directory. Also addressed many "shellcheck" findings. Resolves: #445	1 year ago
Sean Bright	07e378e2c0	alembic: Update list of TLS methods available on ps_transports. ... Related to #221 and #222. Also adds `*.ini` to the `.gitignore` file in ast-db-manage for convenience.	1 year ago
Sean Bright	91c8866ff3	live_ast: Add astcachedir to generated asterisk.conf. ... `astcachedir` (added in b0842713) was not added to `live_ast` so continued to point to the system `/var/cache` directory instead of the one in the live environment.	1 year ago
sungtae kim	ddb5c377fd	res_pjsip: Expanding PJSIP endpoint ID and relevant resource length to 255 characters ... This commit introduces an extension to the endpoint and relevant resource sizes for PJSIP, transitioning from its current 40-character constraint to a more versatile 255-character capacity. This enhancement significantly overcomes limitations related to domain qualification and practical usage, ultimately delivering improved functionality. In addition, it includes adjustments to accommodate the expanded realm size within the ARI, specifically enhancing the maximum realm length. Resolves: #345 UserNote: With this update, the PJSIP realm lengths have been extended to support up to 255 characters. UpgradeNote: As part of this update, the maximum allowable length for PJSIP endpoints and relevant resources has been increased from 40 to 255 characters. To take advantage of this enhancement, it is recommended to run the necessary procedures (e.g., Alembic) to update your schemas.	2 years ago
George Joseph	0c6253b9b8	safe_asterisk: Change directory permissions to 755 ... If the safe_asterisk script detects that the /var/lib/asterisk directory doesn't exist, it now creates it with 755 permissions instead of 770. safe_asterisk needing to create that directory should be extremely rare though because it's normally created by 'make install' which already sets the permissions to 755. Resolves: #316	2 years ago
George Joseph	64597bf727	alembic: Fix quoting of the 100rel column ... Add quoting around the ps_endpoints 100rel column in the ALTER statements. Although alembic doesn't complain when generating sql statements, postgresql does (rightly so). Resolves: #274	2 years ago
Jason D. McCormick	6a55551c5c	install_prereq: Fix dependency install on aarch64. ... Fixes dependency solutions in install_prereq for Debian aarch64 platforms. install_prereq was attempting to forcibly install 32-bit armhf packages due to the aptitude search for dependencies. Resolves: #37	2 years ago
Sean Bright	b2c75ea7f3	ast-db-manage: Synchronize revisions between comments and code. ... In a handful of migrations, the comment header that indicates the current and previous revisions has drifted from the identifiers revision and down_revision variables. This updates the comment headers to match the code.	2 years ago
Sean Bright	a094620058	ast-db-manage: Fix alembic branching error caused by #122. ... Fixes #147.	2 years ago
Naveen Albert	ce7a72d7e2	res_musiconhold: Add option to loop last file. ... Adds the loop_last option to res_musiconhold, which allows the last audio file in the directory to be looped perpetually once reached, rather than circling back to the beginning again. Resolves: #122 ASTERISK-30462 UserNote: The loop_last option in musiconhold.conf now allows the last file in the directory to be looped once reached.	2 years ago
Niklas Larsson	c1f21b6f66	app_queue: Preserve reason for realtime queues ... When Asterisk is restarted it does not preserve paused reason for members of realtime queues. This was fixed for non-realtime queues in ASTERISK_25732 Resolves: #66 UpgradeNote: Add a new column to the queue_member table: reason_paused VARCHAR(80) so the reason can be preserved. UserNote: Make paused reason in realtime queues persist an Asterisk restart. This was fixed for non-realtime queues in ASTERISK_25732.	2 years ago
Naveen Albert	2159ec8532	logrotate: Fix duplicate log entries. ... The Asterisk logrotate script contains explicit references to files with the .log extension, which are also included when *log is expanded. This causes issues with newer versions of logrotate. This fixes this by ensuring that a log file cannot be referenced multiple times after expansion occurs. Resolves: #96 ASTERISK-30442 Reported by: EN Barnett Tested by: EN Barnett	2 years ago
Sean Bright	0d6b271831	core: Cleanup gerrit and JIRA references. (#58) ... * Remove .gitreview and switch to pulling the main asterisk branch version from configure.ac instead. * Replace references to JIRA with GitHub. * Other minor cleanup found along the way. Resolves: #39	2 years ago
The_Blode	0c50ab0d4f	install_prereq: Add Linux Mint support. ... ASTERISK-30359 #close Change-Id: I9c140c7f12ca7dafe65c317f2a26122cf2c72556	2 years ago
Sean Bright	cb8e3aa590	contrib: rc.archlinux.asterisk uses invalid redirect. ... `rc.archlinux.asterisk`, which explicitly requests bash in its shebang, uses the following command syntax: ${DAEMON} -rx "core stop now" > /dev/null 2&>1 The intent of which is to execute: ${DAEMON} -rx "core stop now" While sending both stdout and stderr to `/dev/null`. Unfortunately, because the `&` is in the wrong place, bash is interpreting the `2` as just an additional argument to the `$DAEMON` command and not as a file descriptor and proceeds to use the bashism `&>` to send stderr and stdout to a file named `1`. So we clean it up and just use bash's shortcut syntax. Issue raised and a fix suggested (but not used) by peutch on GitHub¹. ASTERISK-30449 #close 1. https://github.com/asterisk/asterisk/pull/31 Change-Id: Ie279bf4efb4d95cbf507313483d316e977303d19	2 years ago
Naveen Albert	d1bec3623e	res_pjsip_session: Add overlap_context option. ... Adds the overlap_context option, which can be used to explicitly specify a context to use for overlap dialing extension matches, rather than forcibly using the context configured for the endpoint. ASTERISK-30262 #close Change-Id: Ibbcd4a8b11402428a187fb56b8d4e7408774a0db	2 years ago
Mike Bradeen	4095a382da	chan_sip: Remove deprecated module. ... ASTERISK-30297 Change-Id: Ic700168c80b68879d9cee8bb07afe2712fb17996	2 years ago
Mike Bradeen	de3ce178ab	chan_alsa: Remove deprecated module. ... ASTERISK-30298 Change-Id: I5c8afb781528afdf55d237e3bffa5e4a862ae8c7	2 years ago
Michael Kuron	841107f294	res_pjsip_aoc: New module for sending advice-of-charge with chan_pjsip ... chan_sip supported sending AOC-D and AOC-E information in SIP INFO messages in an "AOC" header in a format that was originally defined by Snom. In the meantime, ETSI TS 124 647 introduced an XML-based AOC format that is supported by devices from multiple vendors, including Snom phones with firmware >= 8.4.2 (released in 2010). This commit adds a new res_pjsip_aoc module that inserts AOC information into outgoing messages or sends SIP INFO messages as described below. It also fixes a small issue in res_pjsip_session which didn't always call session supplements on outgoing_response. * AOC-S in the 180/183/200 responses to an INVITE request * AOC-S in SIP INFO (if a 200 response has already been sent or if the INVITE was sent by Asterisk) * AOC-D in SIP INFO * AOC-D in the 200 response to a BYE request (if the client hangs up) * AOC-D in a BYE request (if Asterisk hangs up) * AOC-E in the 200 response to a BYE request (if the client hangs up) * AOC-E in a BYE request (if Asterisk hangs up) The specification defines one more, AOC-S in an INVITE request, which is not implemented here because it is not currently possible in Asterisk to have AOC data ready at this point in call setup. Once specifying AOC-S via the dialplan or passing it through from another SIP channel's INVITE is possible, that might be added. The SIP INFO requests are sent out immediately when the AOC indication is received. The others are inserted into an appropriate outgoing message whenever that is ready to be sent. In the latter case, the XML is stored in a channel variable at the time the AOC indication is received. Depending on where the AOC indications are coming from (e.g. PRI or AMI), it may not always be possible to guarantee that the AOC-E is available in time for the BYE. Successfully tested AOC-D and both variants of AOC-E with a Snom D735 running firmware 10.1.127.10. It does not appear to properly support AOC-S however, so that could only be tested by inspecting SIP traces. ASTERISK-21502 #close Reported-by: Matt Jordan <mjordan@digium.com> Change-Id: Iebb7ad0d5f88526bc6629d3a1f9f11665434d333	2 years ago
Mike Bradeen	d0140fc7fe	app_osplookup: Remove deprecated module. ... ASTERISK-30302 Change-Id: I2268189646fa0b587675d8619322818143172474	2 years ago
Henning Westerholt	7b2d3a6411	res_pjsip: return all codecs on a re-INVITE without SDP ... Currently chan_pjsip on receiving a re-INVITE without SDP will only return the codecs that are previously negotiated and not offering all enabled codecs. This causes interoperability issues with different equipment (e.g. from Cisco) for some of our customers and probably also in other scenarios involving 3PCC infrastructure. According to RFC 3261, section 14.2 we SHOULD return all codecs on a re-INVITE without SDP The PR proposes a new parameter to configure this behaviour: all_codecs_on_empty_reinvite. It includes the code, documentation, alembic migrations, CHANGES file and example configuration additions. ASTERISK-30193 #close Change-Id: I69763708d5039d512f391e296ee8a4d43a1e2148	3 years ago
Maximilian Fridrich	14826a8038	res_pjsip: Add mediasec capabilities. ... This patch adds support for mediasec SIP headers and SDP attributes. These are defined in RFC 3329, 3GPP TS 24.229 and draft-dawes-sipcore-mediasec-parameter. The new features are implemented so that a backbone for RFC 3329 is present to streamline future work on RFC 3329. With this patch, Asterisk can communicate with Deutsche Telekom trunks which require these fields. ASTERISK-30032 Change-Id: Ia7f5b5ba42db18074fdd5428c4e1838728586be2	3 years ago
Maximilian Fridrich	492c93861c	res_pjsip: Add 100rel option "peer_supported". ... This patch adds a new option to the 100rel parameter for pjsip endpoints called "peer_supported". When an endpoint with this option receives an incoming request and the request indicated support for the 100rel extension, then Asterisk will send 1xx responses reliably. If the request did not indicate 100rel support, Asterisk sends 1xx responses normally. ASTERISK-30158 Change-Id: Id6d95ffa8f00dab118e0b386146e99f254f287ad	3 years ago
Mike Bradeen	1b6227a6a8	alembic: add missing ps_endpoints columns ... The following required columns were missing, now added to the ps_endpoints table: incoming_call_offer_pref outgoing_call_offer_pref stir_shaken_profile ASTERISK-29453 Change-Id: I5cf565edf30195844d6acbc1e1de8c5f0d837568	3 years ago
George Joseph	1fa568e76f	Geolocation: chan_pjsip Capability Preview ... This commit adds res_pjsip_geolocation which gives chan_pjsip the ability to use the core geolocation capabilities. This commit message is intentionally short because this isn't a simple capability. See the documentation at https://wiki.asterisk.org/wiki/display/AST/Geolocation for more information. THE CAPABILITIES IMPLEMENTED HERE MAY CHANGE BASED ON USER FEEDBACK! ASTERISK-30128 Change-Id: Ie2e2bcd87243c2cfabc43eb823d4427c7086f4d9	3 years ago
Kevin Harwell	a3b2daf127	res_pjsip: allow TLS verification of wildcard cert-bearing servers ... Rightly the use of wildcards in certificates is disallowed in accordance with RFC5922. However, RFC2818 does make some allowances with regards to their use when using subject alt names with DNS name types. As such this patch creates a new setting for TLS transports called 'allow_wildcard_certs', which when it and 'verify_server' are both enabled allows DNS name types, as well as the common name that start with '*.' to match as a wildcard. For instance: *.example.com will match for: foo.example.com Partial matching is not allowed, e.g. f*.example.com, foo.*.com, etc... And the starting wildcard only matches for a single level. For instance: *.example.com will NOT match for: foo.bar.example.com The new setting is disabled by default. ASTERISK-30072 #close Change-Id: If0be3fdab2e09c2a66bb54824fca406ebaac3da4	3 years ago
Naveen Albert	31dc28ab09	res_pjsip_outbound_registration: Make max random delay configurable. ... Currently, PJSIP will randomly wait up to 10 seconds for each outbound registration's initial attempt. The reason for this is to avoid having all outbound registrations attempt to register simultaneously. This can create limitations with the test suite where we need to be able to receive inbound calls potentially within 10 seconds of starting up. For instance, we might register to another server and then try to receive a call through the registration, but if the registration hasn't happened yet, this will fail, and hence this inconsistent behavior can cause tests to fail. Ultimately, this requires a smaller random value because there may be no good reason to wait for up to 10 seconds in these circumstances. To address this, a new config option is introduced which makes this maximum delay configurable. This allows, for instance, this to be set to a very small value in test systems to ensure that registrations happen immediately without an unnecessary delay, and can be used more generally to control how "tight" the initial outbound registrations are. ASTERISK-29965 #close Change-Id: Iab989a8e94323e645f3a21cbb6082287c7b2f3fd	3 years ago
Mark Petersen	1cdaeb8161	chan_pjsip: add allow_sending_180_after_183 option ... added new global config option "allow_sending_180_after_183" that if enabled will preserve 180 after a 183 ASTERISK-29842 Change-Id: I8a53f8c35595b6d16d8e86e241b5f110d92f3d18	3 years ago
Alexei Gradinari	c12cb899de	res_pjsip_pubsub: provide a display name for RLS subscriptions ... Whereas BLFs allow to show a display name for each RLS entry, the asterisk provides only the extension now. This is not end user friendly. This commit adds a new resource_list option, resource_display_name, to indicate whether display name of resource or the resource name being provided for RLS entries. If this option is enabled, the Display Name will be provided. This option is disabled by default to remain the previous behavior. If the 'event' set to 'presence' or 'dialog' the non-empty HINT name will be set as the Display Name. The 'message-summary' is not supported yet. ASTERISK-29891 #close Change-Id: Ic5306bd5a7c73d03f5477fe235e9b0f41c69c681	3 years ago
Frederic Van Espen	cb44ceadec	ast_coredumper: Fix deleting results when output dir is set ... When OUTPUTDIR is set to another directory and the --delete-results-after is set, the resulting txt files are not deleted. ASTERISK-29794 #close Change-Id: I1c0071f6809a1e3f5cfc455d6eb08378bc0d7286	3 years ago
Alexander Traud	f3b29c6aa8	progdocs: Update Makefile. ... In developer mode, use internal documentation as well. This should produce no warnings. Fix yours! In noisy mode, output all possible warnings of Doxygen. This creates zillion of warnings. Double-check your current module! Any warnings are in the file './doxygen.log'. Beside that, this change avoids deprecated parameters because the configuration file for Doxygen contains only those parameters which differ from the default. This avoids the need to update the file on each run. Furthermore, it adds AST_VECTOR to be expanded. Finally, the default name for that file is Doxyfile. Therefore, let us use that! ASTERISK-26991 ASTERISK-20259 Change-Id: I4129092a199d5e24c319a09cd088614b121015af	3 years ago
Josh Soref	815e99d5ea	contrib: Spelling fixes ... Correct typos of the following word families: standard increase comments valgrind promiscuous editing libtonezone storage aggressive whitespace russellbryant consecutive peternixon ASTERISK-29714 Change-Id: I9cafbf41b579c9c0c84c81719d2c4f900beec245	3 years ago