3758 Commits (dafdcc623cd46dba3663a3b5bb2663f8630a3a00)

Author	SHA1	Message	Date
Sean Bright	bfc93cc954	chan_pjsip: Ignore RTP that we haven't negotiated ... If chan_pjsip receives an RTP packet whose payload differs from the channel's native format, and asymmetric_rtp_codec is disabled (the default), Asterisk will switch the channel's native format to match that of the incoming packet without regard to the negotiated payloads. We now keep track of the formats that have been negotiated and check before switching payloads which results in these packets being dropped instead of causing the session to terminate. ASTERISK-28139 #close Reported by: Paul Brooks Change-Id: Icc3b85cee1772026cee5dc1b68459bf9431c14a3	5 years ago
Joshua Colp	0d1fcf0626	Merge "netsock2: ast_addressfamily_to_sockaddrsize and ast_sockaddr_from_sockaddr." into 13	5 years ago
Friendly Automation	3e446508b4	Merge "netsock2: backport ast_sockaddr_copy_sockaddr to asterisk 13." into 13	5 years ago
Jaco Kroon	e7d2ab666b	netsock2: ast_addressfamily_to_sockaddrsize and ast_sockaddr_from_sockaddr. ... ast_addressfamily_to_sockaddrize will determine the size that's required, and ast_sockaddr_from_sockaddr then wraps this new function and ast_sockaddr_copy_sockaddr to copy arbitrary sockaddr's (without knowing the address family) into the ast_sockaddr structure. Change-Id: Iee604e96e9096c79b477d6e5ff310cf0b06dae86 Signed-off-by: Jaco Kroon <jaco@uls.co.za>	5 years ago
Kevin Harwell	fa700acf39	Merge "res_pjsip_pubsub: Add ability to persist generator state information." into 13	5 years ago
Joshua Colp	4cefb2f3cb	Merge "res_pjsip_endpoint_identifier_ip.c: Add port matching support" into 13	5 years ago
Joshua C. Colp	9720b29d8e	res_pjsip_pubsub: Add ability to persist generator state information. ... Some body generators, such as dialog-info+xml, require storing state information which is then conveyed in the NOTIFY request itself. Up until now there was no way for such body generators to persist this information. Two new API calls have been added to allow body generators to set and get persisted data. This data is persisted out alongside the normal persistence information and allows the body generator to restore state information or to simply use this for normal storage of state. State is stored in the form of JSON and it is up to the body generator to interpret this as needed. The dialog-info+xml body generator has been updated to take advantage of this to persist the version number. ASTERISK-27759 Change-Id: I5fda56c624fd13c17b3c48e0319b77079e9e27de	5 years ago
Sean Bright	49bb7d85cd	res_pjsip_endpoint_identifier_ip.c: Add port matching support ... Adds source port matching support when IP matching is used: [example] type = identify match = 1.2.3.4:5060/32, 1.2.3.4:6000/32, asterisk.org:4444 If the IP matches but the source port does not, we reject and search for alternatives. SRV lookups are still performed if enabled (srv_lookups = yes), unless the configured FQDN includes a port number in which case just a host lookup is performed. ASTERISK-28639 #close Reported by: Mitch Claborn Change-Id: I256d5bd5d478b95f526e2f80ace31b690eebba92	5 years ago
George Joseph	e4e5e07e3d	stasis.c: Use correct topic name in stasis_topic_pool_delete_topic ... When a topic is created for an object, its name is only <object>:<uniqueid> For example: bridge:cb68b3a8-fce7-4738-8a17-d7847562f020 When a topic is added to a pool, its name has the pool's topic name prepended. For example: bridge:all/bridge:cb68b3a8-fce7-4738-8a17-d7847562f020 The topic_pool_entry's name however, is only what was passed in to stasis_topic_pool_get_topic which is bridge:cb68b3a8-fce7-4738-8a17-d7847562f020 That's actually correct because the entry is qualified by the pool that's in. When you're ready to delete the entry from the pool, you retrieve the tropic name from the object but since it now has the pool's topic name prepended, it won't be found in the pool container. Fix: * Modified stasis_topic_pool_delete_topic() to skip past the pool topic's name, if it was prepended to the topic name, before searching the container for a pool entry. ASTERISK-28633 Reported by: Joeran Vinzens Change-Id: I4396aa69dd83e4ab84c5b91b39293cfdbcf483e6	5 years ago
Joshua Colp	5a3826e334	Merge "res_fax: wrap v21 detected Asterisk initiated negotiation with config option" into 13	5 years ago
Jaco Kroon	e8ca2af820	netsock2: backport ast_sockaddr_copy_sockaddr to asterisk 13. ... This function is already present in 15, 16 and master. Change-Id: I491ddecdccc87620c264567c549217e48f3d4ff1 Signed-off-by: Jaco Kroon <jaco@uls.co.za>	6 years ago
Friendly Automation	66970af0d3	Merge "confbridge: Add support for specifying maximum sample rate." into 13	6 years ago
Joshua C. Colp	7cea1c4306	configure: Add check for MySQL client bool and my_bool type usage. ... Instead of trying to use the defined MySQL client version from the header use a configure check to determine whether the bool or my_bool type should be used for defining a boolean. ASTERISK-28604 Change-Id: Id2225b3785115de074c50c123ff1a68005b4a9c7	6 years ago
Joshua C. Colp	ca35de4282	confbridge: Add support for specifying maximum sample rate. ... ConfBridge has the ability to move between different sample rates for mixing the conference bridge. Up until now there has only been the ability to set the conference bridge to mix at a specific sample rate, or to let it move between sample rates as necessary. This change adds the ability to configure a conference bridge with a maximum sample rate so it can move between sample rates but only up to the configured maximum. ASTERISK-28658 Change-Id: Idff80896ccfb8a58a816e4ce9ac4ebde785963ee	6 years ago
Kevin Harwell	754fca9297	res_fax: wrap v21 detected Asterisk initiated negotiation with config option ... A previous patch: Gerrit Change-Id: I73bb24799bfe1a48adae9c034a2edbae54cc2a39 made it so a T.38 Gateway tries to negotiate with both sides by sending T.38 negotiation request to both endpoints supported T.38 versus the previous behavior of forwarding negotiation to the "other" channel once a preamble was detected. This had the unfortunate side effect of breaking some setups. Specifically ones that set the max datagram option on an endpoint configuration (configured max datagram was not propagated since Asterisk now initiates negotiations). This patch adds a configuration option, "negotiate_both", that when enabled makes it so Asterisk initiates the negotiation requests to both endpoints vs. the previous behavior of waiting, and forwarding the request. The default is disabled keeping with the old behavior. ASTERISK-28660 Change-Id: I5deb875f3485e20bc75119ec743090655d864a1a	6 years ago
Jaco Kroon	6e79028020	ACL: ast_apply_acl_nolog - identical to ast_apply_acl but without logging. ... Due to use in res_rtp_asterisk there is a need to be able to apply an ACL without logging any invalid/denies. It's probably sensible to at least validate the ACL once directly after load and report invalid ACLs. Change-Id: I256169229d945ca7c1bbf228fc492d91df345843 Signed-off-by: Jaco Kroon <jaco@uls.co.za>	6 years ago
Kevin Harwell	6ca76798e1	various files - fix some alerts raised by lgtm code analysis ... This patch fixes several issues reported by the lgtm code analysis tool: https://lgtm.com/projects/g/asterisk/asterisk Not all reported issues were addressed in this patch. This patch mostly fixes confirmed reported errors, potential problematic code points, and a few other "low hanging" warnings or recommendations found in core supported modules. These include, but are not limited to the following: * innapropriate stack allocation in loops * buffer overflows * variable declaration "hiding" another variable declaration * comparisons results that are always the same * ambiguously signed bit-field members * missing header guards Change-Id: Id4a881686605d26c94ab5409bc70fcc21efacc25	6 years ago
Sean Bright	f1e3a13579	utils.h: Set lower bound for thread stack size to PTHREAD_STACK_MIN ... ASTERISK-28590 #close Change-Id: I51abce00c04d0a06550bda5205580705185b9c1c	6 years ago
Kevin Harwell	2042020abf	res_pjsip/res_pjsip_mwi: use centralized serializer pools ... Both res_pjsip and res_pjsip_mwi made use of serializer pools. However, they both implemented their own serializer pool functionality that was pretty much identical in each of the source files. This patch removes the duplicated code, and uses the new 'ast_serializer_pool' object instead. Additionally res_pjsip_mwi enables a shutdown group on the pool since if the timing was right the module could be unloaded while taskprocessor threads still needed to execute, thus causing a crash. Change-Id: I959b0805ad024585bbb6276593118be34fbf6e1d	6 years ago
Kevin Harwell	0b7efc1687	serializer: move/add asterisk serializer pool functionality ... Serializer pools have previously existed in Asterisk. However, for the most part the code has been duplicated across modules. This patch abstracts the code into an 'ast_serializer_pool' object. As well the code is now centralized in serializer.c/h. In addition serializer pools can now optionally be monitored by a shutdown group. This will prevent the pool from being destroyed until all serializers have completed. Change-Id: Ib1e906144b90ffd4d5ed9826f0b719ca9c6d2971	6 years ago
Torrey Searle	6fd195ca91	channel/chan_pjsip: add dialplan function for music on hold ... Add a new dialplan function PJSIP_MOH_PASSTHROUGH that allows the on-hold behavior to be controlled on a per-call basis ASTERISK-28542 #close Change-Id: Iebe905b2ad6dbaa87ab330267147180b05a3c3a8	6 years ago
Joshua Colp	d775bc5add	chan_pjsip: Add support for passing hold and unhold requests through. ... This change adds an option, moh_passthrough, that when enabled will pass hold and unhold requests through using a SIP re-invite. When placing on hold a re-invite with sendonly will be sent and when taking off hold a re-invite with sendrecv will be sent. This allows remote servers to handle the musiconhold instead of the local Asterisk instance being responsible. Review: https://reviewboard.asterisk.org/r/4103/ Change-Id: Ib6294e906e577e1a4245cb1f058d3976ff484c52	6 years ago
Sean Bright	622e487cd4	channels: Allow updating variable value ... When modifying an already defined variable in some channel drivers they add a new variable with the same name to the list, but that value is never used, only the first one found. Introduce ast_variable_list_replace() and use it where appropriate. ASTERISK-23756 #close Patches: setvar-multiplie.patch submitted by Michael Goryainov Change-Id: Ie1897a96c82b8945e752733612ee963686f32839	6 years ago
Sean Bright	ddc64ca059	audiohook.c: Substitute silence for unavailable audio frames ... There are 4 scenarios to consider when capturing audio from a channel with an audiohook: 1. There is no rx and no tx audio, so return nothing. 2. There is rx but no tx audio, so return rx. 3. There is tx but no rx audio, so return tx. 4. There is rx and tx audio, so mix them and return. The file passed as the primary argument to MixMonitor will be written to in scenarios 2, 3, and 4. However, if you pass the r() and t() options to MixMonitor, a frame will only be written to the r() file if there was rx audio and a frame will only be written to the t() file if there was tx audio. If you subsequently take the r() and t() files and try to mix them, the sides of the conversation will 'drift' and be non-representative of the user experience. This patch adds a new 'S' option to MixMonitor that injects a frame of silence on either the r() side or the t() side of the channel so that when later mixed, there is no such drift. Change-Id: Ibf5ed73a811087727bd561a89a59f4447b4ee20e	6 years ago
Joshua Colp	1496aef51b	cdr / cel: Use event time at event creation instead of processing. ... When updating times on CDR or CEL records using the time at which it is done can result in times being incorrect if the system is heavily loaded and stasis message processing is delayed. This change instead makes it so CDR and CEL use the time at which the stasis messages that drive the systems are created. This allows them to be backed up while still producing correct records. ASTERISK-28498 Change-Id: I6829227e67aefa318efe5e183a94d4a1b4e8500a	6 years ago
Walter Doekes	3449240130	sched: Don't allow ast_sched_del to deadlock ast_sched_runq from same thread ... When fixing ASTERISK~24212, a change was done so a scheduled callback could not be removed while it was running. The caller of ast_sched_del would have to wait. However, when the caller of ast_sched_del is the callback itself (however wrong this might be), this new check would cause a deadlock: it would wait forever for itself. This changeset introduces an additional check: if ast_sched_del is called by the callback itself, it is immediately rejected (along with an ERROR log and a backtrace). Additionally, the AST_SCHED_DEL_UNREF macro is adjusted so the after-ast_sched_del-refcall function is only run if ast_sched_del returned success. This should fix the following spurious race condition found in chan_sip: - thread 1: schedule sip_poke_peer_now (using AST_SCHED_REPLACE) - thread 2: run sip_poke_peer_now - thread 2: blank out sched-ID (too soon!) - thread 1: set sched-ID (too late!) - thread 2: try to delete the currently running sched-ID After this fix, an ERROR would be logged, but no deadlocks (in do_monitor) nor excess calls to sip_unref_peer(peer) (causing double frees of rtp_instances and other madness) should occur. (Thanks Richard Mudgett for reviewing/improving this "scary" change.) Note that this change does not fix the observed race condition: unlocked access to peer->pokeexpire (and potentially other scheduled items in chan_sip), causing AST_SCHED_DEL_UNREF to look at a changing id. But it will make the deadlock go away. And in the observed case, it will not have adverse affects (like memory leaks) because the scheduled item is removed through a different path. ASTERISK-28282 Change-Id: Ic26777fa0732725e6ca7010df17af77a012aa856	6 years ago
George Joseph	f22dedc597	Merge "app_confbridge: Attended transfer event fixup" into 13	6 years ago
George Joseph	41f5d15763	app_confbridge: Attended transfer event fixup ... When a channel already in a conference bridge is attended transfered to another extension, or when an existing call is attended transferred into a conference bridge, we now generate ConfbridgeJoin and ConfbridgeLeave events for the entering and departing channels. Change-Id: Id7709cfbceb26fbcb828b2d0d2a6b2fbeaf028e1	6 years ago
Joshua Colp	1ea9bad34d	res_rtp_asterisk: Add support for DTLS packet fragmentation. ... This change adds support for larger TLS certificates by allowing OpenSSL to fragment the DTLS packets according to the configured MTU. By default this is set to 1200. This is accomplished by implementing our own BIO method that supports MTU querying. The configured MTU is returned to OpenSSL which fragments the packet accordingly. When a packet is to be sent it is done directly out the RTP instance. ASTERISK-28018 Change-Id: If2d5032019a28ffd48f43e9e93ed71dbdbf39c06	6 years ago
George Joseph	6edef49525	Merge "mwi core: Move core MWI functionality into its own files" into 13	6 years ago
Friendly Automation	10b46eea9e	Merge "app_dial.c: RINGTIME, PROGRESSTIME and ms resolution dial timings" into 13	6 years ago
Antoni Goldstein	001e7762e4	app_dial.c: RINGTIME, PROGRESSTIME and ms resolution dial timings ... Added RINGTIME, RINGTIME_MS, PROGRESSTIME, PROGRESSTIME_MS variables filled at the earliest received PROGRESS or RINGING. Added millisecond versions of DIALEDTIME and ANSWEREDTIME. Added millisecond versions of ast_channel_get_up_time and ast_channel_get_duration in channel.c. ASTERISK-28363 Change-Id: If95f1a7d8c4acbac740037de0c6e3109ff6620b1	6 years ago
Kevin Harwell	4ea20c9c85	mwi core: Move core MWI functionality into its own files ... There is enough MWI functionality to warrant it having its own 'c' and header files. This patch moves all current core MWI data structures, and functions into the following files: main/mwi.h main/mwi.c Note, code was simply moved, and not modified. However, this patch is also in preparation for core MWI changes, and additions to come. Change-Id: I9dde8bfae1e7ec254fa63166e090f77e4d3097e0	6 years ago
Dan Cropp	00588226c6	res_pjsip: Added a norefersub configuration setting ... Added a new PJSIP global setting called norefersub. Default is true to keep support working as before. res_pjsip_refer: Configures PJSIP norefersub capability accordingly. Checks the PJSIP global setting value. If it is true (default) it adds the norefersub capability to PJSIP. If it is false (disabled) it does not add the norefersub capability to PJSIP. This is useful for Cisco switches that do not follow RFC4488. ASTERISK-28375 #close Reported-by: Dan Cropp Change-Id: I0b1c28ebc905d881f4a16e752715487a688b30e9	6 years ago
Friendly Automation	e7de71ee24	Merge "main/json.c: Added app_name, app_data to channel type" into 13	6 years ago
sungtae kim	707897e5f7	main/json.c: Added app_name, app_data to channel type ... It was difficult to check the channel's current application and parameters using ARI for current channels. Added app_name, app_data items to show the current application information. ASTERISK-28343 Change-Id: Ia48972b3850e5099deab0faeaaf51223a1f2f38c	6 years ago
sungtae kim	fb7aa52ae0	res/res_ari: Added ARI resource /ari/channels/{channelId}/rtp_statistics ... Added ARI resource for channel statistics. GET /ari/channels/{channelId}/rtp_statistics : It returns given channel's rtp statistics detail. ASTERISK-28320 Change-Id: I4343eec070438cec13f2a4f22e7fd9e574381376	6 years ago
Matthew Fredrickson	4315634bc9	main/taskprocessor: Increase max name length of taskprocessors ... Since the new names went in, the maximum taskprocessor name is too short. This patch increases the name field to a length to better handle the new names. Change-Id: I32f32d6926f25c8ef5a91303fd2988d2c2858877	6 years ago
George Joseph	85f87790a5	Merge "sorcery.c: Sorcery enhancements for wizard management" into 13	6 years ago
George Joseph	69b194c837	sorcery.c: Sorcery enhancements for wizard management ... Added ability to specifiy a wizard is read-only when applying it to a specific object type. This allows you to specify create, update and delete callbacks for the wizard but limit which object types can use them. Added the ability to allow an object type to have multiple wizards of the same type. This is indicated when a wizard is added to a specific object type. Added 3 new sorcery wizard functions: * ast_sorcery_object_type_insert_wizard which does the same thing as the existing ast_sorcery_insert_wizard_mapping function but accepts the new read-only and allot-duplicates flags and also returns the ast_sorcery_wizard structure used and it's internal data structure. This allows immediate use of the wizard's callbacks without having to register a "wizard mapped" observer. * ast_sorcery_object_type_apply_wizard which does the same thing as the existing ast_sorcery_apply_wizard_mapping function but has the added capabilities of ast_sorcery_object_type_insert_wizard. * ast_sorcery_object_type_remove_wizard which removes a wizard matching both its name and its original argument string. * The original logic in __ast_sorcery_insert_wizard_mapping was moved to __ast_sorcery_object_type_insert_wizard and enhanced for the new capabilities, then __ast_sorcery_insert_wizard_mapping was refactored to just call __ast_sorcery_insert_wizard_mapping. * Added a unit test to test_sorcery.c to test the read-only capability. Change-Id: I40f35840252e4313d99e11dbd80e270a3aa10605	6 years ago
Sean Bright	cc954977eb	vector: Add AST_VECTOR_COMPACT() to reclaim wasted space ... This might be useful in situations where you are loading an undetermined number of items into a vector and don't want to keep (potentially) 2x the necessary memory around indefinitely. Change-Id: I9711daa0fe01783fc6f04c5710eba84f2676d7b9	6 years ago
Friendly Automation	3df8d605cc	Merge "AMI/ARI: Bump non-breaking version numbers" into 13	6 years ago
Joshua C. Colp	c7d58aec7a	Merge "stasis: Improve topic/subscription names and statistics." into 13	6 years ago
Kevin Harwell	a96729c1cd	AMI/ARI: Bump non-breaking version numbers ... Increasing the non-breaking AMI and ARI version numbers due to changes and additions in those API's. Note, some changes may be forthcoming (will be added between now and the next release of Asterisk), thus not listed here. As well a few changes listed below may have been released in a previous release of Asterisk, but the API version numbers were not increased at that time, so including here. AMI: * res_pjsip: option for ContactStatus event updates - 4a8564c ARI: * bridging: Add creation timestamps - 4dd4dbd * res_stasis: Add ability to switch applications - 65170ba * ARI event type filtering - da93d17 * Added ARI resource /ari/asterisk/ping - 67d587f ASTERISK-28314 Change-Id: I96951b19c27c196e410b09fe82b00c8ca328cccc	6 years ago
Joshua Colp	07b3253155	stasis: Improve topic/subscription names and statistics. ... Topic names now follow: <subsystem>:<functionality>[/<object>] This ensures that they are all unique, and also provides better insight in to what each topic is for. Subscriber ids now also use the main topic name they are subscribed to and an incrementing integer as their identifier to make it easier to understand what the subscription is primarily responsible for. Both the CLI commands for listing topic and subscription statistics now sort to make it a bit easier to see what is going on. Subscriptions will now show all topics that they are receiving messages from, not just the main topic they were subscribed to. ASTERISK-28335 Change-Id: I484e971a38c3640f2bd156282e532eed84bf220d	6 years ago
Friendly Automation	4f6daa0aff	Merge "chan_pjsip: add a flag to ignore 183 responses if no SDP present" into 13	6 years ago
Torrey Searle	cbc704c5ec	chan_pjsip: add a flag to ignore 183 responses if no SDP present ... chan_sip will always ignore 183 responses that do not contain SDP however, chan_pjsip will currently always translate it into a 183 with SDP. This new flag allows chan_pjsip to have the same behavior as chan_sip. ASTERISK-28322 #close Change-Id: If81cfaa17c11b6ac703e3d71696f259d86c6be4a	6 years ago
George Joseph	c3189a696e	Merge "res_stasis: Add ability to switch applications." into 13	6 years ago
Friendly Automation	db18f8c959	Merge "bridging: Add creation timestamps" into 13	6 years ago
Ben Ford	65170ba8f0	res_stasis: Add ability to switch applications. ... Added the ability to move between Stasis applications within Stasis. This can be done by calling 'move' in an application, providing (at minimum) the channel's id and the application to switch to. If the application is not registered or active, nothing will happen and the channel will remain in the current application, and an event will be triggered to let the application know that the move failed. The event name is "ApplicationMoveFailed", and provides the "destination" that the channel was attempting to move to, as well as the usual channel information. Optionally, a list of arguments can be passed to the function call for the receiving application. A full example of a 'move' call would look like this: client.channels.move(channelId, app, appArgs) The control object used to control the channel in Stasis can now switch which application it belongs to, rather than belonging to one Stasis application for its lifetime. This allows us to use the same control object instead of having to tear down the current one and create another. ASTERISK-28267 #close Change-Id: I43d12b10045a98a8d42541889b85695be26f288a	6 years ago