This change makes it so that if an RTCP packet is being sent
the RTP ICE component is used for sending if RTCP-MUX is in use.
ASTERISK-27133
Change-Id: I6200f611ede709602ee9b89501720c29545ed68b
This patch creates a new configuration option called "webrtc". When enabled it
defaults and enables the following options that are needed in order for webrtc
to work in Asterisk:
rtcp-mux, use_avpf, ice_support, and use_received_transport=enabled
media_encryption=dtls
dtls_verify=fingerprint
dtls_setup=actpass
When "webrtc" is enabled, this patch also parses the "msid" media level
attribute from an SDP. It will also appropriately add it onto the outgoing
session when applicable.
Lastly, when "webrtc" is enabled h264 RTCP FIR feedback frames are now sent.
ASTERISK-27119 #close
Change-Id: I5ec02e07c5d5b9ad86a34fdf31bf2f9da9aac6fd
BUNDLE is a specification used in WebRTC to allow multiple
streams to use the same underlying transport. This reduces
the number of ICE and DTLS negotiations that has to occur
to 1 normally.
This change implements this by adding support for it to
the RTP SDP module in PJSIP. BUNDLE can be turned on using
the "bundle" option and on an offer we will offer to
bundle streams together. On an answer we will accept any
bundle groups provided. Once accepted each stream is bundled
to another RTP instance for transport.
For the res_rtp_asterisk changes the ability to bundle
an RTP instance to another based on the SSRC received
from the remote side has been added. For outgoing traffic
if an RTP instance is bundled to another we will use the
other RTP instance for any transport related things. For
incoming traffic received from the transport instance we
look up the correct instance based on the SSRC and use it
for any non-transport related data.
ASTERISK-27118
Change-Id: I96c0920b9f9aca7382256484765a239017973c11
Currently when rtp is paused, no packets are written to the
recorded audio file, causing the silence to be skipped and recording
not properly time aligned. The read handler as been adapted to
return a silence frame of the correct size.
ASTERISK-27128 #close
Change-Id: I2d7f60650457860b9c70907b14426756b058a844
arm the t38 webhook always, so we can correctly reject a
T38 negotiation request when t38 is disabled on a channel
Change-Id: Ib1ffe35aee145d4e0fe61dd012580be11aae079d
This adds a parameter to ast_waitfordigit_full which can be used to only
stop waiting when certain expected digits are received. Any unexpected
DTMF digits are simply ignored.
This also creates a new dialplan application WaitDigit.
ASTERISK-27129 #close
Change-Id: Id233935ea3d13e71c75a0861834c5936c3700ef9
By default, when res_musiconhold reloads or unloads, it sends a HUP
signal to custom applications (and all descendants), waits 100ms,
then sends a TERM signal, waits 100ms, then finally sends a KILL
signal. An application which is interacting with an external
device and/or spawns children of its own may not be able to exit
cleanly in the default times, expecially if sent a KILL signal, or
if it's children are getting signals directly from
res_musiconhoild.
* To allow extra time, the 'kill_escalation_delay'
class option can be used to set the number of milliseconds
res_musiconhold waits before escalating kill signals, with the
default being the current 100ms.
* To control to whom the signals are sent, the "kill_method" class
option can be set to "process_group" (the default, existing
behavior), which sends signals to the application and its
descendants directly, or "process" which sends signals only to the
application itself.
Change-Id: Iff70a1a9405685a9021a68416830c0db5158603b
If the from_user field contains certain characters (like @, {, ^, etc.),
PJSIP will return a null value for the URI when attempting to parse it.
This causes a crash when trying to dial out through a trunk that contains
these invalid characters in its from_user field.
This change checks the configuration and ensures that an endpoint will
not be created if the from_user contains an invalid character. It also
adds a null check to the PJSIP URI parsing as a backup.
ASTERISK-27036 #close
Reported by: Maxim Vasilev
Change-Id: I0396fdb5080604e0bdf1277464d5c8a85db913d0
When a message is received on the TURN socket, the code processing the
message needs to call into the ICE/STUN session for further processing.
This code path locks the TURN group lock then the ICE/STUN group lock. In
another thread an ICE/STUN timer can fire off to send a keep alive message
over the TURN socket. In this code path, the ICE/STUN group lock is
obtained then the TURN group lock is obtained to send the packet. A
classic deadlock case if the group locks are not the same.
* Made TURN get created using the ICE/STUN session's group lock.
NOTE: I was originally concerned that the ICE/STUN session can get
recreated by ice_reset_session() for an event like RTCP multiplexing
causing a change during SDP negotiation. In this case the TURN group lock
would become different. However, TURN is also recreated as part of the
ICE/STUN recreation in ice_create() when all known ICE candidates are
added to the new ICE session. While the ICE/STUN and TURN sessions are
being recreated there is a period where the group locks could be
different.
ASTERISK-27023 #close
Patches:
res_rtp_asterisk-turn-deadlock-fix.patch (license #6502)
patch uploaded by Michael Walton (modified)
Change-Id: Ic870edb99ce4988a8c8eb6e678ca7f19da1432b9
This API was not actively maintained, was not added to new modules
(such as res_pjsip), and there exist better alternatives to acquire the
same information, such as the ARI.
Change-Id: I4b2185a83aeb74798b4ad43ff8f89f971096aa83
When a SIP message comes in on a transport, pjproject obtains the lock on
the transport and pulls the data out of the socket. Unlike UDP, the TCP
transport does not allow concurrent access. Without concurrency the
transport lock is not released when the transport's message complete
callback is called. The processing continues and eventually Asterisk
starts processing the SIP message. The first thing Asterisk tries to do
is determine the associated dialog of the message to determine the
associated serializer. To get the associated serializer safely requires
us to get the dialog lock.
To send a request or response message for a dialog, pjproject obtains the
dialog lock and then obtains the transport lock. Deadlock can result
because of the opposite order the locks are obtained.
* Fix the deadlock by obtaining the serializer associated with the dialog
another way that doesn't involve obtaining the dialog lock. In this case,
we use an ao2 container to hold the associated endpoint and serializer.
The new locks are held a brief time and won't overlap other existing lock
times.
ASTERISK-27090 #close
Change-Id: I9ed63f4da9649e9db6ed4be29c360968917a89bd
The OBJ_SEARCH_xxx defines should not be used as if they were individual
bits. They represent a multi-bit enumeration value field.
Change-Id: I32abc9a475396dab02402a7014357dd94284e17b
There needed to be a way to notify handlers upstream that DTLS had been
established. This patch makes it so once DTLS has been estalished a source
change control frame is put into the read queue. Any handlers can then watch
for that frame and trigger off of it.
ASTERISK-27096 #close
Change-Id: I27ff344f5a8c691a1890dfe3254a4b1a49e7f4a0
When connected_line_method is "invite", we're supposed to determine
if the client can support UPDATE and if it can, send UPDATE instead
of INVITE to avoid the SDP renegotiation. Not only was pjproject
not setting the PJSIP_INV_SUPPORT_UPDATE flag, we were testing
that invite_tsx wasn't NULL which isn't always the case.
* Updated chan_pjsip/update_connected_line_information to drop the
requirement that invite_tsx isn't NULL.
* Submitted patch to pjproject sip_inv.c that sets the
PJSIP_INV_SUPPORT_UPDATE flag correctly.
* Updated pjsip.conf.sample to clarify what happens when "invite"
is specified.
ASTERISK-27095
Change-Id: Ic2381b3567b8052c616d96fbe79564c530e81560
The existing auto dtmf mode reverts to inband if 4733 fails to be
negotiated. This patch adds a new mode auto_info which will
switch to INFO instead of inband if 4733 is not available.
ASTERISK-27066 #close
Change-Id: Id185b11e84afd9191a2f269e8443019047765e91
The stream topology (list of streams and order) is now stored with the
configured PJSIP endpoints and used during the negotiation process.
Media negotiation state information has been changed to be stored
in a separate object. Two of these objects exist at any one time
on a session. The active media state information is what was previously
negotiated and the pending media state information is what the
media state will become if negotiation succeeds. Streams and other
state information is stored in this object using the index (or
position) of each individual stream for easy lookup.
The ability for a media type handler to specify a callback for
writing has been added as well as the ability to add file
descriptors with a callback which is invoked when data is available
to be read on them. This allows media logic to live outside of
the chan_pjsip module.
Direct media has been changed so that only the first audio and
video stream are directly connected. In the future once the RTP
engine glue API has been updated to know about streams each individual
stream can be directly connected as appropriate.
Media negotiation itself will currently answer all the provided streams
on an offer within configured limits and on an offer will use the
topology created as a result of the disallow/allow codec lines.
If a stream has been removed or declined we will now mark it as such
within the resulting SDP.
Applications can now also request that the stream topology change.
If we are told to do so we will limit any provided formats to the ones
configured on the endpoint and send a re-invite with the new topology.
Two new configuration options have also been added to PJSIP endpoints:
max_audio_streams: determines the maximum number of audio streams to
offer/accept from an endpoint. Defaults to 1.
max_video_streams: determines the maximum number of video streams to
offer/accept from an endpoint. Defaults to 1.
ASTERISK-27076
Change-Id: I8afd8dd2eb538806a39b887af0abd046266e14c7
When re-inviting to add more streams it is possible for
the role of existing ICE sessions to be changed to the
incorrect value. This results in subsequent refreshes
within the sessions getting a role conflict and the ICE
session breaking down. This change only sets the role to
be the new value if an ICE renegotiation is actually
going to happen, otherwise the existing role is preserved.
As well if we encounter a situation where a unidirectional
ICE negotiation happens and the other side does not send us
candidates we will not store any information for sending
traffic, even though we know where they are reachable. This
change fixes this by using the source of the ICE traffic
itself as the target if no candidates are known and we
receive some ICE traffic.
ASTERISK-27088
Change-Id: I71228181e358917fcefc3100fad21b2fc02a59a9
The T38 sdp callback incorrectly has a side effect of incrementing
the media_count. This can lead to core dumps.
Change-Id: I7bb2f4987de4046ec52cfc34e5ea0662dae32af8
Do not need to unsubscribe/subscribe on creating the ednpoint's contact.
The modified function create_mwi_subscriptions_for_endpoint adds
the subscription only if it does not exist.
The subscriptions aren't added for active contacts
which are retrieved on startup from realtime
if mwi_disable_initial_unsolicited=yes.
Because the mwi_contact_added is not called.
So the subscriptions also should be created on updating contact.
ASTERISK-26230 #close
Change-Id: I47e265af9296ca09aa42a316fdacac104148cee4
The SDP offer/answer model requires an answer to an offer before a new SDP
can be processed. This allows our local SDP creation to be deferred until
we know that we need to create an offer or an answer SDP. Once the local
SDP is created it won't change until the SDP negotiation is restarted.
An offer SDP in an initial SIP INVITE can receive more than one answer
SDP. In this case, we need to merge each answer SDP with our original
offer capabilities to get the currently negotiated capabilities. To
satisfy this requirement means that we cannot update our proposed
capabilities until the negotiations are restarted.
Local topology updates from ast_sdp_state_update_local_topology() are
merged together until the next offer SDP is created. These accumulated
updates are then merged with the current negotiated capabilities to create
the new proposed capabilities that the offer SDP is built.
Local topology updates are merged in several passes to attempt to be smart
about how streams from the system are matched with the previously
negotiated stream slots. To allow for T.38 support when merging, type
matching considers audio and image types to be equivalent. First streams
are matched by stream name and type. Then streams are matched by stream
type only. Any remaining unmatched existing streams are declined. Any
new active streams are either backfilled into pre-merge declined slots or
appended onto the end of the merged topology. Any excess new streams
above the maximum supported number of streams are simply discarded.
Remote topology negotiation merges depend if the topology is an offer or
answer. An offer remote topology negotiation dictates the stream slot
ordering and new streams can be added. A remote offer can do anything to
the previously negotiated streams except reduce the number of stream
slots. An answer remote topology negotiation is limited to what our offer
requested. The answer can only decline streams, pick codecs from the
offered list, or indicate the remote's stream hold state.
I had originally kept the RTP instance if the remote offer SDP changed a
stream type between audio and video since they both use RTP. However, I
later removed this support in favor of simply creating a new RTP instance
since the stream's purpose has to be changing anyway. Any RTP packets
from the old stream type might cause mischief for the bridged peer.
* Added ast_sdp_state_restart_negotiations() to restart the SDP
offer/answer negotiations. We will thus know to create a new local SDP
when it is time to create an offer or answer.
* Removed ast_sdp_state_reset(). Save the current topology before
starting T.38. To recover from T.38 simply update the local topology to
the saved topology and restart the SDP negotiations to get the offer SDP
renegotiating the previous configuration.
* Allow initial topology for ast_sdp_state_alloc() to be NULL so an
initial remote offer SDP can dictate the streams we start with. We can
always update the local topology later if it turns out we need to offer
SDP first because the remote chose to defer sending us a SDP.
* Made the ast_sdp_state_alloc() initial topology limit to max_streams,
limit to configured codecs, handle declined streams, and discard
unsupported types.
* Convert struct ast_sdp to ao2 object. Needed to easily save off a
remote SDP to refer to later for various reasons such as generating
declined m= lines in the local SDP.
* Improve converting remote SDP streams to a topology including stream
state. A stream state of AST_STREAM_STATE_REMOVED indicates the stream is
declined/dead.
* Improve merging streams to take into account the stream state.
* Added query for remote hold state.
* Added maximum streams allowed SDP config option.
* Added ability to create new streams as needed. New streams are created
with configured default audio, video, or image codecs depending on stream
type.
* Added global locally_held state along with a per stream local hold
state. Historically, Asterisk only has a global locally held state
because when the we put the remote on hold we do it for all active
streams.
* Added queries for a rejected offer and current SDP negotiation role.
The rejected query allows the using module to know how to respond to a
failed remote SDP set. Should the using module respond with a 488 Not
Acceptable Here or 500 Internal Error to the offer SDP?
* Moved sdp_state_capabilities.connection_address to ast_sdp_state. There
seems no reason to keep it in the sdp_state_capabilities struct since it
was only used by the ast_sdp_state.proposed_capabilities instance.
* Callbacks are now available to allow the using module some customization
of negotiated streams and to complete setting up streams for use. See the
typedef doxygen for each callback for what is allowable and when they are
called.
* Added topology answerer modify callback.
* Added topology pre and post apply callbacks.
* Added topology offerer modify callback.
* Added topology offerer configure callback.
* Had to rework the unit tests because I changed how SDP topologies are
merged. Replaced several unit tests with new negotiation tests.
Change-Id: If07fe6d79fbdce33968a9401d41d908385043a06
If the endpoint's last contact is deleted unsolicited MWI has to be
unsubscribed.
ASTERISK-27051 #close
Change-Id: I33e174e0b9dba0998927d16d6d100fda5c7254e0
When a stasis channel is stolen by another app, the control
structure is unreffed but never unlinked from the app_controls
container. This causes the channel reference to leak.
Added OBJ_UNLINK to the callback in channel_stolen_cb.
Also added some additional channel lifecycle debug messages to
channel.c.
ASTERISK-27059 #close
Repoorted-by: George Joseph
Change-Id: Ib820936cd49453f20156971785e7f4f182c56e14
This option was added to control whether to notify dialog-info state
'early' or 'confirmed' on Ringing when already INUSE.
The value "yes" is useful for some SIP phones (Cisco SPA)
to be able to indicate and pick up ringing devices.
ASTERISK-26919 #close
Change-Id: Ie050bc30023543c7dfb4365c5be3ce58c738c711
In Corosync 2.x libraries were changed to use LibQB IPC.
Sadly LibQB IPC doesn't support copy-free access to received buffer, so
Corosync libraries were rewritten to use stack as buffer. Mostly the
needed stack size is quite small, but for all *_dispatch functions, 1MiB
is needed.
Asterisk function ast_pthread_create_background set stack size for new
thread to much smaller AST_BACKGROUND_STACKSIZE (~500KiB).
This results in Asterisk crash when running with Corosync 2.x.
Patch solves this issue by creating it's own version of
ast_pthread_create_background which sets stack size to much higher value
(actually it's AST_BACKGROUND_STACKSIZE + 3MiB).
Another problem may appear when "corosync show members" netconsole
command is executed. It is also executed in thread and also has only
500KiB stack size. Sadly it calls corosync_cfg_get_node_addrs which
again needs at least 1MiB stack.
Solution is to use HAVE_COROSYNC_CFG_STATE_TRACK as a discriminator
between Corosync 1.x and 2.x. If 1.x is found, nothing changes. If 2.x
is found, NodeID is displayed instead of IP address.
ASTERISK-25370 #close
Reported by: mdu113
Change-Id: Id95b0d21ab6e708e7d74ad8786c587211676fa08
The recent change to make the use of LOAD_DECLINE more consistent
caused res_ari to unload itself before declining if the ari.conf
file wasn't found. The ari stubs though still tried to use the
configuration resulting in segfaults.
This patch creates a new CHECK_ARI_MODULE_LOADED macro which tests
to see if res_ari is actually loaded and causes the stubs to also
decline if it isn't. The macro was then added to the mustache
template's "load_module" function.
ASTERISK-27026 #close
Reported-by: Ronald Raikes
Change-Id: I263d56efa628ee3c411bdcd16d49af6260c6c91d
destroy_subscription was attempting to get the id of the
subscription tree's endpoint after we'd already called ao2_cleanup
on it causing a segfault.
Moved the cleanup until after the debug statement and since
endpoint could also be NULL at this point, check for that as well.
ASTERISK-27057 #close
Reported-by: Ryan Smith
Change-Id: Ice0a7727f560cf204d870a774c6df71e159b1678
There was a typo introduced in commit 776ffd77 which was preventing
the transport's external media address from being used.
ASTERISK-27024 #close
Reported-by: Christopher van de Sande
patches:
patch.diff submitted by Florian Floimair (license 6892)
Change-Id: I7ec617171eaa2d86d2680b00cf37d5088adafc27
It looks like there was a copy/paste error in ast_rtp_change_source
where if there was a rtcp srtp instance, instead of updating its
ssrc we were updating the srtp instance ssrc twice.
ASTERISK-27022 #close
Reported-by: Michael Walton
Change-Id: Ic88f3aee7227b401c58745ac265ff92c19620095
When doing an attended transfer it's possible for the transferer, after
receiving an accepted response from Asterisk, to send a BYE to Asterisk,
which can then be processed before Asterisk has time to start and/or
complete the transfer process. This of course causes the transfer to not
complete successfully, thus dropping the call.
This patch makes it so any BYEs received from the transferer, after the REFER,
that initiate a session end are deferred until the transfer is complete. This
allows the channel that would have otherwise been hung up by Asterisk to
remain available throughout the transfer process.
ASTERISK-27053 #close
Change-Id: I43586db79079457d92d71f1fd993be9a3b409d5a
If sending unsolicited mwi to all endpoints on startup is disabled
(mwi_disable_initial_unsolicited=yes) do not need to create subscriptions.
If there are many (thousands) realtime endpoints configured with unsolicited mwi
and Vociemail Storage configured as ODBC or IMAP there will be huge number of
DB/IMAP requests on startup.
ASTERISK-26230 #close
Change-Id: I50ae909639e3ee298b931a54def4b2b9e0fb86c5
Added check for NULL return value when calling
ast_sorcery_retrieve_by_id in function get_write_timeout
ASTERISK-27046
Change-Id: I9357717278da631c3a1cb502c412693929b0cb41
PJSIP support in Asterisk differs from chan_sip in that it
allows media to be sent as-is without transcoding provided
the codecs were negotiated in the SDP. This is allowed
according to the RFC. Support for this differs quite a lot
though and some endpoints do not handle it well.
This change extends the 'asymmetric_rtp_codec' option to
also cover this case. When set to no (the default) the code
behaves as chan_sip does - the best codec is selected and
we will only ever send that, unless we change what we are
sending if the remote side changes. When set to yes we
will send media as-is without transcoding if the codec
has been negotiated in the SDP.
ASTERISK-26996
Change-Id: Ib1647f6902a0843e8c435946f831c2159e8d1d51
When a frame destined for a MulticastRTP channel does not have timing
information (such as when an 'originate' is done), we generate the RTP
timestamps ourselves without regard to the number of samples we are
about to send.
Instead, use the same method as res_rtp_asterisk and 'predict' a
timestamp given the number of samples. If the difference between the
timestamp that we generate and the one we predict is within a specific
threshold, use the predicted timestamp so that we end up with timestamps
that are consistent with the number of samples we are actually sending.
Change-Id: I2bf0db3541b1573043330421cbb114ff0f22ec1f
This introduces the ability for PJSIP code to specify filtering flags
when retrieving PJSIP contacts. The first flag for use causes the
query code to only retrieve contacts that are not unreachable. This
change has been leveraged by both the Dial() process and the
PJSIP_DIAL_CONTACTS dialplan function so they will now only attempt
calls to contacts which are not unreachable.
ASTERISK-26281
Change-Id: I8233b4faa21ba3db114f5a42e946e4b191446f6c
In review 4843 (ASTERISK-24858), we added a hack that forced a smoother
creation when sending signed linear so that the byte order was adjusted
during transmission. This was needed because smoother flags were lost
during the new format work that was done in Asterisk 13.
Rather than rolling that same hack into res_rtp_multicast, re-introduce
smoother flags so that formats can dictate their own options.
Change-Id: I77b835fba0e539c6ce50014a984766f63cab2c16
This change allows the format of the EAGI audio pipe to be changed by
setting the dialplan variable 'EAGI_AUDIO_FORMAT' to the name of one of
the loaded formats.
ASTERISK-26124 #close
Change-Id: I7a10fad401ad2a21c68c2e7246fa357d5cee5bbd
Documented the 'beep' option in both the parameters list and the command
description.
ASTERISK-23839 #close
Change-Id: I4970395c922dbdce3f7cf0f56d5b065ec9aa53ea
Explicitly check that the appropriate number of arguments were passed to
SET VARIABLE before attempting to reference them. Also initialize the
arguments array to zeroes before populating it.
ASTERISK-22432 #close
Change-Id: I5143607d80a2724f749c1674f3126b04ed32ea97
If the generated XML documentation for a command does not end with a \n,
the postamble of the usage message does not appear on its own line.
ASTERISK-25662 #close
Change-Id: If190f1e9e37fe215fed95897d78d4a6e142b0020
Some devices separate format attributes with a semicolon followed by a
space, so trim blanks before trying to match them.
ASTERISK-27008 #close
Change-Id: Ia44cb2e4fef5c73dc541a29da79cb0e19c22d9cc
When using rtcp mux if an rtcp payload came in it would still use the srtp
unprotect algorithm instead of the srtp unprotect rtcp method. Since rtcp
data was being passed to the rtp unprotect method this would result in an
error.
This patch ensures that the correct unprotect method is chosen by making
sure the passed in rtcp flag is appropriately set when rtcp mux is enabled
and an rtcp payload is received.
ASTERISK-26979 #close
Change-Id: Ic5409f9d1a267f1d4785fc5aed867daaecca6241
When manipulating flags on a channel the channel has to be
locked to guarantee that nothing else is also manipulating
the flags. This change introduces locking where necessary to
guarantee this. It also adds helper functions that manipulate
channel flags and lock to reduce repeated code.
ASTERISK-26789
Change-Id: I489280662dba0f4c50981bfc5b5a7073fef2db10
Retransmissions of an initial INVITE could be queued in the serializer
before we have processed the first INVITE message. If the first INVITE
message doesn't get completely processed before the retransmissions are
seen then we could try to setup the same call from the retransmissions. A
symptom of this is seeing a (key exists) message associated with an
INVITE. An earlier change attempted to address this kind of problem by
calculating a distributor serializer to use for unassociated messages.
Part of that change also made incoming calls keep using that distributor
serializer. (ASTERISK-26088) However, some leftover code was still
deferring the INVITE processing to the session's serializer even though we
were already in that serializer. This not only is unnecessary but would
cause the same call resetup problem.
* Removed the code to defer processing the initial INVITE to the session's
serializer because we are already running in that serializer.
ASTERISK-26998 #close
Change-Id: I1e822d82dcc650e508bc2d40d545d5de4f3421f6
This option was added to turn off notifying the progress details
on Blind Transfer. If this option is not set then the chan_pjsip
will send NOTIFY "200 OK" immediately after "202 Accepted".
Some SIP phones like Mitel/Aastra or Snom keep the line busy until
receive "200 OK".
ASTERISK-26333 #close
Change-Id: Id606fbff2e02e967c02138457badc399144720f2
This change adds the required logic to allow the SIP
Call-ID to be placed into the HEP RTCP traffic if the
chan_sip module is used. In cases where the option is
enabled but the channel is not either SIP or PJSIP then
the code will fallback to the channel name as done
previously.
Based on the change on Nir's branch at:
team/nirs/hep-chan-sip-support
ASTERISK-26427
Change-Id: I09ffa5f6e2fdfd99ee999650ba4e0a7aad6dc40d
When a call gets put on hold RTP is temporarily stopped and Asterisk was
setting the remote RTCP address to NULL. Then when RTCP data was received
from the remote endpoint, Asterisk would be missing this information when
publishing the rtcp_message stasis event. Consequently, message subscribers
(in this case res_hep_rtcp) trying to parse the "from" field output the
following error:
"ast_sockaddr_split_hostport: Port missing in (null)"
This patch makes it so the remote RTCP address is no longer set to NULL when
stopping RTP. There was only one place that appeared to check if the remote
RTCP address was NULL as a way to tell if RTCP was running. This patch added
an additional check on the RTCP schedid for that case to make sure RTCP was
truly not running.
ASTERISK-26860 #close
Change-Id: I6be200fb20db647e48b5138ea4b81dfa7962974b
A deadlock can happen between a channel lock and a pjsip session media
container lock. One thread is processing a reINVITE's SDP and walking
through the session's media container when it waits for the channel lock
to put the determined format capabilities onto the channel. The other
thread is writing a frame to the channel and processing the T.38 frame
hook. The T.38 frame hook then waits for the pjsip session's media
container lock. The two threads are now deadlocked.
* Made the T.38 frame hook release the channel lock before searching the
session's media container. This fix has been done to several other
frame hooks to fix deadlocks.
ASTERISK-26974 #close
Change-Id: Ie984a76ce00bef6ec9aa239010e51e8dd74c8186
There was no context info in this module's log messages so it was
impossible to toubleshoot.
Added endpoint or host to all messages and added the realms in the
challenge for the "No auth credentials for any realm" message.
Change-Id: Ifeed2786f35fbea7d141237ae15625e472acff9b
RFC 5576 defines how SSRC-level attributes may be added to SDP media
descriptions. In general, this is useful for grouping related SSRCes,
indicating SSRC-level format attributes, and resolving collisions in RTP
SSRC values. These attributes are used widely by browsers during WebRTC
communications, including attributes defined by documents outside of RFC
5576.
This commit introduces the addition of SSRC-level attributes into SDPs
generated by Asterisk. Since Asterisk does not tend to use multiple
SSRCs on a media stream, the initial support is minimal. Asterisk
includes an SSRC-level CNAME attribute if configured to do so. This at
least gives browsers (and possibly others) the ability to resolve SSRC
collisions at offer-answer time.
In order to facilitate this, the RTP engine API has been enhanced to be
able to retrieve the SSRC and CNAME on a given RTP instance.
res_rtp_asterisk currently does not provide meaningful CNAME values in
its RTCP SDES items, and therefore it currently will always return an
empty string as the CNAME value. A task in the near future will result
in res_rtp_asterisk generating more meaningful CNAMEs.
Change-Id: I29e7f23e7db77524f82a3b6e8531b1195ff57789
If you use ast_request to create a PJSIP channel but then hang it
up without causing a transaction to be sent, the session will
never be destroyed. This is due ot the fact that it's pjproject
that triggers the session cleanup when the transaction ends.
app_chanisavail was doing this to get more granular channel state
and it's also possible for this to happen via ARI.
* ast_sip_session_terminate was modified to explicitly call the
cleanup tasks and unreference session if the invite state is NULL
AND invite_tsx is NULL (meaning we never sent a transaction).
* chan_pjsip/hangup was modified to bump session before it calls
ast_sip_session_terminate to insure that session stays valid
while it does its own cleanup.
* Added test events to session_destructor for a future testsuite
test.
ASTERISK-26908 #close
Reported-by: Richard Mudgett
Change-Id: I52daf6f757184e5544c261f64f6fe9602c4680a9
It's possible for a name in a party id structure to be marked as valid, but the
name string itself be NULL (for instance this is possible to do by using the
dialplan CALLERID function). There were a couple of places where the name was
validated, but the string itself was not checked before passing it to functions
like 'strlen'. This of course caused a crashed.
This patch adds in a NULL check before attempting to pass it into a function
that is not NULL tolerant.
ASTERISK-25823 #close
Change-Id: Iaa6ffe9d92f598fe9e3c8ae373fadbe3dfbf1d4a
* Initialize hepv3_runtime_data.sockfd to -1 so that our ao2 destructor
does not close fd 0
* Add logging output when the required option - capture_address - is not
specified.
* Remove a no longer relevant #define and correct related documentation
* Pass appropriate flags to aco_option_register so that capture_address
cannot be the empty string.
ASTERISK-26953 #close
Change-Id: Ief08441bc6596d6f1718fa810e54a5048124f076
If ICE is enabled and a STUN server does not respond then we will block
until we give up on the STUN response. This will take nine seconds. In
the mean time the peer that sent the INVITE will send retransmissions.
* Restructure res_pjsip_session.c:new_invite() to send a 100 Trying out
earlier to prevent these retransmissions.
ASTERISK-26890
Change-Id: Ie3fc611e53a0eff6586ad55e4aacad81cf6319a8
* Restructure ast_sip_session_alloc() to need less cleanup on off nominal
error paths.
* Made ast_sip_session_alloc() and ast_sip_session_create_outgoing() avoid
unnecessary ref manipulation to return a session. This is faster than
calling a function. That function may do logging of the ref changes with
REF_DEBUG enabled.
Change-Id: I2a0affc4be51013d3f0485782c96b8fee3ddb00a
Occasionally a crash happens when processing the RTCP DTLS timeout
handler. The RTCP DTLS timeout timer could be left running if we have not
completed the DTLS handshake before we place the call on hold or we
attempt direct media.
* Made ast_rtp_prop_set() stop the RTCP DTLS timer when disabling RTCP.
* Made some sanity tweaks to ast_rtp_prop_set() when switching from
standard RTCP mode to RTCP multiplexed mode.
ASTERISK-26692 #close
Change-Id: If6c64c79129961acfa4b3d63a864e8f6b664acc0
The struct ast_rtp_instance has historically been indirectly protected
from reentrancy issues by the channel lock because early channel drivers
held the lock for really long times. Holding the channel lock for such a
long time has caused many deadlock problems in the past. Along comes
chan_pjsip/res_pjsip which doesn't necessarily hold the channel lock
because sometimes there may not be an associated channel created yet or
the channel pointer isn't available.
In the case of ASTERISK-26835 a pjsip serializer thread was processing a
message's SDP body while another thread was reading a RTP packet from the
socket. Both threads wound up changing the rtp->rtcp->local_addr_str
string and interfering with each other. The classic reentrancy problem
resulted in a crash.
In the case of ASTERISK-26853 a pjsip serializer thread was processing a
message's SDP body while another thread was reading a RTP packet from the
socket. Both threads wound up processing ICE candidates in PJPROJECT and
interfering with each other. The classic reentrancy problem resulted in a
crash.
* rtp_engine.c: Make the ast_rtp_instance_xxx() calls lock the RTP
instance struct.
* rtp_engine.c: Make ICE and DTLS wrapper functions to lock the RTP
instance struct for the API call.
* res_rtp_asterisk.c: Lock the RTP instance to prevent a reentrancy
problem with rtp->rtcp->local_addr_str in the scheduler thread running
ast_rtcp_write().
* res_rtp_asterisk.c: Avoid deadlock when local RTP bridging in
bridge_p2p_rtp_write() because there are two RTP instance structs
involved.
* res_rtp_asterisk.c: Avoid deadlock when trying to stop scheduler
callbacks. We cannot hold the instance lock when trying to stop a
scheduler callback.
* res_rtp_asterisk.c: Remove the lock in struct dtls_details and use the
struct ast_rtp_instance ao2 object lock instead. The lock was used to
synchronize two threads to prevent a race condition between starting and
stopping a timeout timer. The race condition is no longer present between
dtls_perform_handshake() and __rtp_recvfrom() because the instance lock
prevents these functions from overlapping each other with regards to the
timeout timer.
* res_rtp_asterisk.c: Remove the lock in struct ast_rtp and use the struct
ast_rtp_instance ao2 object lock instead. The lock was used to
synchronize two threads using a condition signal to know when TURN
negotiations complete.
* res_rtp_asterisk.c: Avoid deadlock when trying to stop the TURN
ioqueue_worker_thread(). We cannot hold the instance lock when trying to
create or shut down the worker thread without a risk of deadlock.
This patch exposed a race condition between a PJSIP serializer thread
setting up an ICE session in ice_create() and another thread reading RTP
packets.
* res_rtp_asterisk.c:ice_create(): Set the new rtp->ice pointer after we
have re-locked the RTP instance to prevent the other thread from trying to
process ICE packets on an incomplete ICE session setup.
A similar race condition is between a PJSIP serializer thread resetting up
an ICE session in ice_create() and the timer_worker_thread() processing
the completion of the previous ICE session.
* res_rtp_asterisk.c:ast_rtp_on_ice_complete(): Protect against an
uninitialized/null remote_address after calling
update_address_with_ice_candidate().
* res_rtp_asterisk.c: Eliminate the chance of ice_reset_session()
destroying and setting the rtp->ice pointer to NULL while other threads
are using it by adding an ao2 wrapper around the PJPROJECT ice pointer.
Now when we have to unlock the RTP instance object to call a PJPROJECT ICE
function we will hold a ref to the wrapper. Also added some rtp->ice NULL
checks after we relock the RTP instance and have to do something with the
ICE structure.
ASTERISK-26835 #close
ASTERISK-26853 #close
Change-Id: I780b39ec935dcefcce880d50c1a7261744f1d1b4
The periodic doc job does a make ari-stubs and checks that
there are no changes before generating the docs. Since I changed
the mustache template (and the generated code directly) recently
and forgot to regenerate the stubs, the doc job thinks they're out
of date.
Change-Id: I94b97035311eccf52b0101b8590223265a7881d4
res_stun_monitor will fail to load if DNS resolution of the STUN server
fails. Instead, we continue without the STUN server being resolved and
we will re-attempt the resolution on the STUN refresh interval.
ASTERISK-21856 #close
Reported by: Jeremy Kister
Change-Id: I6334c54a1cc798f8a836b4b47948e0bb4ef59254
This saves around 100 bytes when G.711, G.722, G.729, and GSM are advertised in
SDP. This reduces the chance to hit the MTU bearer of 1300 bytes for SIP over
UDP, if many codecs are allowed in Asterisk. This new feature is enabled
together with the optional feature compact_headers=yes via the file pjsip.conf.
ASTERISK-26932 #close
Change-Id: Iaa556ab4c8325cd34c334387ab2847fab07b1689
In all non-pbx modules, AST_MODULE_LOAD_FAILURE has been changed
to AST_MODULE_LOAD_DECLINE. This prevents asterisk from exiting
if a module can't be loaded. If the user wishes to retain the
FAILURE behavior for a specific module, they can use the "require"
or "preload-require" keyword in modules.conf.
A new API was added to logger: ast_is_logger_initialized(). This
allows asterisk.c/check_init() to print to the error log once the
logger subsystem is ready instead of just to stdout. If something
does fail before the logger is initialized, we now print to stderr
instead of stdout.
Change-Id: I5f4b50623d9b5a6cb7c5624a8c5c1274c13b2b25
Added the stun_blacklist option to rtp.conf. Some multihomed servers have
IP interfaces that cannot reach the STUN server specified by stunaddr.
Blacklist those interface subnets from trying to send a STUN packet to
find the external IP address. Attempting to send the STUN packet
needlessly delays processing incoming and outgoing SIP INVITEs because we
will wait for a response that can never come until we give up on the
response. Multiple subnets may be listed.
ASTERISK-26890 #close
Change-Id: I3ff4f729e787f00c3e6e670fe6435acce38be342
* create_rtp(): Eliminate use of deprecated transport struct member. That
member and several others in the transport structure were deprecated
because of an infinite loop created when using realtime configuration.
See 2451d4e455
ASTERISK-26851
Change-Id: I0533aa13c9ce3c6cc394e0fd2b5bf1cd1b2ef3bc
This change adds database tables for the PUBLISH support so it
can be configured using realtime. A minor fix to the
res_pjsip_publish_asterisk module was done so that it read the
sorcery configuration from the correct section. Finally the
sample configuration files have been updated.
ASTERISK-26928
Change-Id: I81991ae5c75af98d247f7eacd1c0b0a763675952
* create_rtp(): Fix unexpected alteration of global address_rtp if a
transport is bound to an address.
* create_rtp(): Fix use of uninitialized memory if the endpoint RTP media
address is invalid or the transport has an invalid address.
ASTERISK-26851
Change-Id: Icde42e65164a88913cb5c2601b285eebcff397b7
We were leaking a transport ref in multihomed_on_rx_message() which
resulted in the FRACK about excessive ref counts.
ASTERISK-26916 #close
Change-Id: I7a96658a9614a060565bb9ad51cb1c9c11ee145f
It is perfectly acceptable for a BYE to be sent on a disconnected
session. This occurs when we respond to a challenge to the BYE
for authentication credentials.
ASTERISK-26363
Change-Id: I6ef0ddece812fea6665a1dd2549ef44fb9d90045
Two new parameters have been added to the pjsip config wizard.
* Setting 'sends_line_with_registrations' to true will cause the wizard
to skip the creation of an identify object to match incoming request
to the endpoint and instead add the line and endpoint parameters to
the outbound registration object.
* Setting 'outbound_proxy' is a shortcut for adding individual
endpoint/outbound_proxy, aor/outbound_proxy and
registration/outbound_proxy parameters.
Change-Id: I678e5f80765734c056620528a6d40d82736ceeb0
(cherry picked from commit a827892ff7)
(cherry picked from commit 27344675be)
There doesn't appear to be any reason that we are chdir'ing in
moh_scan_files, and in the event of an Asterisk crash, the core files
may not get written because we have changed into a read-only directory.
ASTERISK-23996 #close
Reported by: Walter Doekes
Change-Id: Iac806dce01b3335963fbd62d4b4da9a65c614354
If a read error occurs, we immediately attempt a reconnect without any
delay. Instead, let's sleep and backoff up to 60 seconds before we try
again.
ASTERISK-24712 #close
Reported by: Matthias Urlichs
Change-Id: I6fe10ef4734837727437beab715e336777f13f48
chan_sip sets the hangup cause code to AST_CAUSE_REQUESTED_CHAN_UNAVAIL
(44) when a channel is hung up due to an RTP timeout. So do the same
when it happens with PJSIP for parity.
Change-Id: I3546ebbde6460c22a27c9da1bf321711b5961ab8
The documentation for JABBER_STATUS (and the deprecated JabberStatus
app) indicate that a return value of 7 indicates that the specified
buddy was not in the roster. It also indicates that you can specify a
"bare" JID (one without a resource). Unfortunately the actual behavior
does not match the documented behavior.
Assuming that our roster includes the buddy online and available
"valid@example.org/Valid" and does *not* include the buddy
"invalid@example.org", the JABBER_STATUS() function returns the
following before this patch:
+------------------------------+------------+--------------------------+
| Buddy | Status | Result |
+------------------------------+------------+--------------------------+
| valid@example.org | Online | 7 (Not in roster) |
| valid@example.org/Valid | Online | 1 (Online) |
| valid@example.org/Invalid | N/A | 7 (Not in roster) |
| invalid@example.org | N/A | Error logged, no return |
| invalid@example.org/Valid | N/A | Error logged, no return |
+------------------------------+------------+--------------------------+
And after this patch:
+------------------------------+------------+--------------------------+
| Buddy | Status | Result |
+------------------------------+------------+--------------------------+
| valid@example.org | Online | 1 (Online) |
| valid@example.org/Valid | Online | 1 (Online) |
| valid@example.org/Invalid | N/A | 6 (Offline) |
| invalid@example.org | N/A | 7 (Not in roster) |
| invalid@example.org/Valid | N/A | 7 (Not in roster) |
+------------------------------+------------+--------------------------+
This brings the behavior in line with the documentation.
ASTERISK-23510 #close
Reported by: Anthony Critelli
Change-Id: I9c3241035363ef4a6bdc21fabfd8ffcd9ec657bf
If any errors occur during the TLS connection setup, we currently dump a
fairly generic error message. So instead we try to pull in something
useful from OpenSSL to report instead.
ASTERISK-24712
Reported by: Matthias Urlichs
Change-Id: I288500991a9681f447d92913b11fedaf426087f4
The only remaining reference to the endpoint is in the endpoints
container, and because it is unlinked in ast_endpoint_shutdown, we don't
have to explicitly cleanup the endpoint ourselves.
Change-Id: I912a2692e52d3e2ed445b32d8ae3f9004bc2f2e8
SSL_connect returns non-zero for both success and some error conditions
so simply negating is inadequate.
Change-Id: Ifbf882896e598703b6c615407fa456d3199f95b1
If we never establish a connection to our Jabber server, iksemel never sets up
its internal transport pointer, so attempting to send a message dereferences a
NULL pointer and causes a crash.
ASTERISK-21855 #close
Reported by: Jeremy Kister
Change-Id: I204a568894e4a53ab929783ecc594a000f04d79c
Support for RFC3578 overlap dialling (i.e. 484 Response to partially matched
destinations) as currently provided by chan_sip is missing from res_pjsip.
This patch adds a new endpoint attribute (allow_overlap) [defaults to yes]
which when set to yes enables 484 responses to partial destination
matches rather than the current 404.
ASTERISK-26864
Change-Id: Iea444da3ee7c7d4f1fde1d01d138a3d7b0fe40f6
Rather than hard-coding UDP, allow consumers of the HEP API to specify
which protocol is in use. Update the PJSIP provider to pass in the
current protocol type.
ASTERISK-26850 #close
Change-Id: I54bbb0a001cfe4c6a87ad4b6f2014af233349978
We aren't validating that the URI we just parsed is a SIP/SIPS one before
trying to access the user, host, and port members of a possibly uninitialized
structure.
Also update the MessageSend documentation to indicate what 'from' formats are
accepted.
ASTERISK-26484 #close
Reported by: Vinod Dharashive
Change-Id: I476b5cc5f18a7713d0ee945374f2a1c164857d30
We are currently passing in the capacity of the read buffer instead of the
number of bytes that we actually read off the wire.
Change-Id: I60465049727d955c7f9a5e529e6f2aaff04cda36
We were inadvertenly referencing the cos_video option to determine if we
should set the tos_audio and cos_audio value on the RTP instance.
Change-Id: Ia7964f486801d39dc6f5dae570baff079e1595b0
If local_net is not defined on a transport, transport_state->localnet
will be NULL. ast_apply_ha will, be default, return AST_SENSE_ALLOW in
this case, causing the external_media_address, if set, to be skipped.
This patch causes us to only check if we are sending within a network if
local_net is defined.
ASTERISK-26879 #close
Change-Id: Ib661c31a954cabc9c99f1f25c9c9a5c5b82cbbfb
Currently a wildcard address is used for the local RTP socket, which
will not always result in the same address as used by the SIP socket
(e.g. if explicit transport addresses are configured).
Use the transport's host address when binding new local RTP sockets if
available.
ASTERISK-26851
Change-Id: I098c29c9d1f79a4f970d72ba894874ac75954f1a
A new transport parameter 'symmetric_transport' has been added.
When a request from a dynamic contact comes in on a transport with
this option set to 'yes', the transport name will be saved and used
for subsequent outgoing requests like OPTIONS, NOTIFY and INVITE.
It's saved as a contact uri parameter named 'x-ast-txp' and will
display with the contact uri in CLI, AMI, and ARI output. On the
outgoing request, if a transport wasn't explicitly set on the
endpoint AND the request URI is not a hostname, the saved transport
will be used and the 'x-ast-txp' parameter stripped from the
outgoing packet.
* config_transport was modified to accept and store the new parameter.
* config_transport/transport_apply was updated to store the transport
name in the pjsip_transport->info field using the pjsip_transport->pool
on UDP transports.
* A 'multihomed_on_rx_message' function was added to
pjsip_message_ip_updater that, for incoming requests, retrieves the
transport name from pjsip_transport->info and retrieves the transport.
If transport->symmetric_transport is set, an 'x-ast-txp' uri parameter
containing the transport name is added to the incoming Contact header.
* An 'ast_sip_get_transport_name' function was added to res_pjsip.
It takes an ast_sip_endpoint and a pjsip_sip_uri and returns a
transport name if endpoint->transport is set or if there's an
'x-ast-txp' parameter on the uri and the uri host is an ipv4 or
ipv6 address. Otherwise it returns NULL.
* An 'ast_sip_dlg_set_transport' function was added to res_pjsip
which takes an ast_sip_endpoint, a pjsip_dialog, and an optional
pjsip_tpselector. It calls ast_sip_get_transport_name() and if
a non-NULL is returned, sets the selector and sets the transport
on the dialog. If a selector was passed in, it's updated.
* res_pjsip/ast_sip_create_dialog_uac and ast_sip_create_dialog_uas
were modified to call ast_sip_dlg_set_transport() instead of their
original logic.
* res_pjsip/create_out_of_dialog_request was modified to call
ast_sip_get_transport_name() and pjsip_tx_data_set_transport()
instead of its original logic.
* Existing transport logic was removed from endpt_send_request
since that can only be called after a create_out_of_dialog_request.
* res_pjsip/ast_sip_create_rdata was converted to a wrapper around
a new 'ast_sip_create_rdata_with_contact' function which allows
a contact_uri to be specified in addition to the existing
parameters. (See below)
* res_pjsip_pubsub/internal_pjsip_evsub_send_request was eliminated
since all it did was transport selection and that is now done in
ast_sip_create_dialog_uac and ast_sip_create_dialog_uas.
* 'contact_uri' was added to subscription_persistence. This was
necessary because although the parsed rdata contact header has the
x-ast-txp parameter added (if appropriate),
subscription_persistence_update stores the raw packet which
doesn't have it. subscription_persistence_recreate was then
updated to call ast_sip_create_rdata_with_contact with the
persisted contact_uri so the recreated subscription has the
correct transport info to send the NOTIFYs.
* res_pjsip_session/internal_pjsip_inv_send_msg was eliminated since
all it did was transport selection and that is now done in
ast_sip_create_dialog_uac.
* pjsip_message_ip_updater/multihomed_on_tx_message was updated
to remove all traces of the x-ast-txp parameter from the
outgoing headers.
NOTE: This change does NOT modify the behavior of permanent
contacts specified on an aor. To do so would require that the
permanent contact's contact uri be updated with the x-ast-txp
parameter and the aor sorcery object updated. If we need to
persue this, we need to think about cloning permanent contacts into
the same store as the dynamic ones on an aor load so they can be
updated without disturbing the originally configured value.
You CAN add the x-ast-txp parameter to a permanent contact's uri
but it would be much simpler to just set endpoint->transport.
Change-Id: I4ee1f51473da32ca54b877cd158523efcef9655f
This change removes an assumption that when DTLS is stopped
an RTCP session will be present on the RTP session. This is not
always the case.
ASTERISK-26732
Change-Id: Ib9f7c09ce0b005efe362dbcc8795202b18f94611
This commit adds support for RFC 5761: Multiplexing RTP Data and Control
Packets on a Single Port. Specifically, it enables the feature when
using chan_pjsip.
A new option, "rtcp_mux" has been added to endpoint configuration in
pjsip.conf. If set, then Asterisk will attempt to use rtcp-mux with
whatever it communicates with. Asterisk follows the rules set forth in
RFC 5761 with regards to falling back to standard RTCP behavior if the
far end does not indicate support for rtcp-mux.
The lion's share of the changes in this commit are in
res_rtp_asterisk.c. This is because it was pretty much hard wired to
have an RTP and an RTCP transport. The strategy used here is that when
rtcp-mux is enabled, the current RTCP transport and its trappings (such
as DTLS SSL session) are freed, and the RTCP session instead just
mooches off the RTP session. This leads to a lot of specialized if
statements throughout.
ASTERISK-26732 #close
Reported by Dan Jenkins
Change-Id: If46a93ba1282418d2803e3fd7869374da8b77ab5
When transfering to a URI without an extension, ensure that the
s extension of the dialplan is entered
ASTERISK-26869 #close
Change-Id: I07403df66cf93f09e00a40ab5b41bfc6f72b1525
This change ensures that if no header_match option is set on an
identify an error message is not output stating the option is set
to an invalid value.
ASTERISK-26863
Change-Id: I239bc6d2319dd3da24ba96a38d4d6e9b5526d62a
This patch adds a new features to the endpoint identifier module,
'match_header'. When set, inbound requests are matched by a provided SIP
header: value pair. This option works in conjunction with the existing
'match' configuration option, such that if any 'match*' attribute
matches an inbound request, the request is associated with the specified
endpoint.
Since this module now identifies by more than just IP address,
appropriate renaming of the module and/or variables can be done in a
non-release branch.
ASTERISK-26863 #close
Change-Id: Icfc14835c962f92e35e67bbdb235cf0589de5453
(cherry picked from commit 30f52d79d7)
* Added additional fields to ast_sdp_options.
* Re-organized ast_sdp.
* Updated field names to correspond to RFC4566 terminology.
* Created allocs/frees for SDP children.
* Created getters/setters for SDP children where appropriate.
* Added ast_sdp_create_from_state.
* Refactored res_sdp_translator_pjmedia for changes.
Change-Id: Iefbd877af7f5a4d3c74deead1bff8802661b0d48
* res_musiconhold.c: Ensure the general section is not treated as
a moh class.
ASTERISK-26353 #close
Change-Id: Ia3dbd11ea2b43ab3e6c820a9827811dd24bea82d
This change adds a PJSIP patch (which has been contributed upstream)
to allow the registration of IPv6 transport types.
Using this the res_pjsip_transport_websocket module now registers
an IPv6 Websocket transport and uses it for the corresponding
traffic.
ASTERISK-26685
Change-Id: Id1f9126f995b31dc38db8fdb58afd289b4ad1647
When doing some WebRTC testing, I found that the websocket would
disconnect whenever I attempted to place a call into Asterisk. After
looking into it, I pinpointed the problem to be due to the iostreams
change being merged in.
Under certain circumstances, a call to ast_iostream_read() can return a
negative value. However, in this circumstance, the websocket code was
treating this negative return as if it were a partial read from the
websocket. The expected length would get adjusted by this negative
value, resulting in the expected length being too large.
This patch simply adds an if check to be sure that we are only updating
the expected length of a read when the return from a read is positive.
ASTERISK-26842 #close
Reported by Mark Michelson
Change-Id: Ib4423239828a013d27d7bc477d317d2f02db61ab
According to the RFC[1] WSS should only be used in the Via header
for secure Websockets.
* Use WSS in Via for secure transport.
* Only register one transport with the WS name because it would be
ambiguous. Outgoing requests may try to find the transport by name and
pjproject only finds the first one registered. This may mess up unsecure
websockets but the impact should be minimal. Firefox and Chrome do not
support anything other than secure websockets anymore.
* Added and updated some debug messages concerning websockets.
* security_events.c: Relax case restriction when determining security
transport type.
* The res_pjsip_nat module has been updated to not touch the transport
on Websocket originating messages.
[1] https://tools.ietf.org/html/rfc7118
ASTERISK-26796 #close
Change-Id: Ie3a0fb1a41101a4c1e49d875a8aa87b189e7ab12
res_config_pgsql should match the behavior of other realtime backend
drivers so that queue_log can disable adaptive logging.
ASTERISK-25628 #close
Reported by: Dmitry Wagin
Change-Id: Ic1fb1600c7ce10fdfb1bcdc43c5576b7e0014372
The find_table() functions NULL or a locked table pointer. We are
not consistently calling release_table() in failure paths.
Change-Id: I6f665b455799c84b036e5b34904b82b05eab9544
When a subscription was being recreated and the endpoint wasn't
found, we were trying to unref the endpoint. This was causing
FRACKs. Removed the unref.
ASTERISK-26823 #close
Change-Id: If86d2aecff8fe853c7f38a1bfde721fcef3cd164
This change fixes an assumption in res_pjsip that a contact will
always have a status. There is a race condition where this is
not true and would crash. The status will now be unknown when
this situation occurs.
ASTERISK-26623 #close
Change-Id: Id52d3ca4d788562d236da49990a319118f8d22b5
Outbound registration now subscribes to network change events
published by res_stun_monitor and refreshes all registrations
when an event happens.
The 'pjsip send (un)register' CLI commands were updated to accept
'*all' as an argument to operate on all registrations.
The 'PJSIP(Un)Register' AMI commands were also updated to
accept '*all'.
ASTERISK-26808 #close
Change-Id: Iad58a9e0aa5d340477fca200bf293187a6ca5a25
This change updates the documentation for the outbound_proxy option
to ensure it is consistently stated that a full SIP URI must be
provided for the option.
The res_pjsip_outbound_registration module has also been changed so
that the provided outbound_proxy value is checked to ensure it is a
URI and if not an error is output stating so.
ASTERISK-26782
Change-Id: I6c239a32274846fd44e65b44ad9bf6373479b593
* Removed all 2.5.5 functional patches.
* Updated usages of pj_release_pool to be "safe".
* Updated configure options to disable webrtc.
* Updated config_site.h to disable webrtc in pjmedia.
* Added Richard Mudgett's recent resolver patches.
Change-Id: Ib400cc4dfca68b3d07ce14d314e829bfddc252c7
* A missing AST_LIST_UNLOCK() in find_table()
* The ESCAPE_STRING() macro uses pgsqlConn under the hood and we were
not consistently locking before calling it.
* There were a handful of other places where pgsqlConn was accessed
directly without appropriate locking.
Change-Id: Iea63f0728f76985a01e95b9912c3c5c6065836ed
The initial motivation for this patch was to properly handle memory
allocation failures - we weren't checking the return values from the
various LDAP library allocation functions.
In the process, because update_ldap() and update2_ldap() were
substantially the same code, they've been consolidated.
Change-Id: Iebcfe404177cc6860ee5087976fe97812221b822
All of the realtime backends create artificial ast_categorys to pass
back into the core as query results. These categories have no filename
or line number information associated with them and the backends differ
slightly on how they create them. So create a couple helper macros to
help make things more consistent.
Also updated the call sites to remove redundant error messages about
memory allocation failure.
Note that res_config_ldap sets the category filename to the 'table name'
but that is not read by anything in the core, so I've dropped it.
Change-Id: I3a1fd91e0c807dea1ce3b643b0a6fe5be9002897
The inbound authentication object is supposed to be immutable when it is
stored in sorcery. However, the immutable property is violated if the
authentication object does not have a realm set.
The immutable contract violation has a different effect depending upon
what sorcery back end is used. If it is the config file back end you
would get the same object back until res_pjsip is reloaded. If it is the
real-time or AstDB back end you would get a new object on each query. If
it is cached you would get the same object back until it is refreshed from
the database.
Once an inbound authentication object has its realm set it may or may not
get updated again if the default_realm changes.
If the same authentication object is used for inbound and outbound
authentication then the immutable violation can make it very hard to
determine why the outbound authentication now fails. The only diagnostic
message is a complaint about no realms matching when it had worked
earlier. It fails because of the difference in behaviour for an empty
realm setting between inbound and outbound authentication objects.
* Fixed the sorcery object immutable violation by creating a new object
and setting the default_realm on it instead. The new object is a shallow
copy for speed.
* The auth_store thread storage no longer holds an auth ref. It
interferes with the shallow copy and never needed a ref anyway.
ASTERISK-26799 #close
Change-Id: I2328a52f61b78ed5fbba38180b7f183ee7e08956
There was code attempting to update the artificial authentication object
whenever the default_realm changed. However, once the artificial
authentication object was created it would never get updated. The
artificial authentication object would require a system restart for a
change to the default_realm to take effect.
ASTERISK-26799
Change-Id: Id59036e9529c2d3ed728af2ed904dc36e7094802
Using the same auth section for inbound and outbound authentication is not
recommended. There is a difference in meaning for an empty realm setting
between inbound and outbound authentication uses.
An empty inbound auth realm represents the global section's default_realm
value when the authentication object is used to challenge an incoming
request. An empty outgoing auth realm is treated as a don't care wildcard
when the authentication object is used to respond to an incoming
authentication challenge.
ASTERISK-26799
Change-Id: Id3952f7cfa1b6683b9954f2c5d2352d2f11059ce
* Removed overloaded unmatched response ignore. We obviously sent the
request so we shouldn't ignore it because it isn't new work.
ASTERISK-26669
ASTERISK-26738
Change-Id: I55fb5cadc83a8e6699b347c6dc7fa32c5a617d37
When listing a container, we now print the number of objects
in the container at the end of the list.
Change-Id: I791cbc3ee9da9a2af9adc655164b5d32953df812
OpenLDAP will raise an error when we try to delete an LDAP attribute
that doesn't exist. We need to filter out LDAP_MOD_DELETE requests
based on which attributes the current LDAP entry actually has. There
is of course a small window of opportunity for this to still fail,
but it is much less likely now.
Change-Id: I3fe1b04472733e43151563aaf9f8b49980273e6b
The code in update_ldap() and update2_ldap() was using both Asterisk's
memory allocation routines as well as OpenLDAP's. I've changed it so
that everything that is passed to OpenLDAP's functions are allocated
with their routines.
Change-Id: Iafec9c1fd8ea49ccc496d6316769a6a426daa804
The "_general" configuration section allows administrators to provide
both general configuration options (host, port, url, etc.) as well as a
global realtime-to-LDAP-attribute mapping that is a fallback if one of
the later sections do not override it. This neglected to exclude the
general configuration options from the mapping. As an example, during
my testing, chan_sip requested 'port' from realtime, and because I did
not have it defined, it pulled in the 'port' configuration option from
"_general." We now filter those out explicitly.
Change-Id: I1fc61560bf96b8ba623063cfb7e0a49c4690d778
We always treat the first change of our modification batch as a
replacement when it sometimes is actually a delete. So we have to pass
the correct arguments to the OpenLDAP library.
ASTERISK-26580 #close
Reported by: Nicholas John Koch
Patches:
res_config_ldap.c-11.24.1.patch (license #6833) patch uploaded
by Nicholas John Koch
Change-Id: I0741d25de07c9539f1edc6eff3696165dfb64fbe
When ast_config_load() fails with CONFIG_STATUS_FILEINVALID, it has
already destroyed the ast_config struct for us. Trying to do it again
results in a crash.
Change-Id: If6a5c0ca718ad428e01a1fb25beb209a9ac18bc6
This creates the following:
* Asterisk's internal representation of an SDP
* An API for translating SDPs from one format to another
* An implementation of a translator for PJMEDIA
Change-Id: Ie2ecd3cbebe76756577be9b133e84d2ee356d46b
The realtime framework allows for components to look up values using a
LIKE clause with similar syntax to SQL's. pbx_realtime uses this
functionality to search for pattern matching extensions that start with
an underscore (_).
When passing an underscore to SQL's LIKE clause, it will be interpreted
as a wildcard matching a single character and therefore needs to be
escaped. It is (for better or for worse) the responsibility of the
component that is querying realtime to escape it with a backslash before
passing it in. Some RDBMs support escape characters by default, but the
SQL92 standard explicitly says that there are no escape characters
unless they are specified with an ESCAPE clause, e.g.
SELECT * FROM table WHERE column LIKE '\_%' ESCAPE '\'
This patch instructs 3 backends - res_config_mysql, res_config_pgsql,
and res_config_sqlite3 - to use the ESCAPE clause where appropriate.
Looking through documentation and source tarballs, I was able to
determine that the ESCAPE clause is supported in:
MySQL 5.0.15 (released 2005-10-22 - earliest version available from
archives)
PostgreSQL 7.1 (released 2001-04-13)
SQLite 3.1.0 (released 2005-01-21)
The versions of the relevant libraries that we depend on to access MySQL
and PostgreSQL will not work on versions that old, and I've added an
explicit check in res_config_sqlite3 to only use the ESCAPE clause when
we have a sufficiently new version of SQLite3.
res_config_odbc already handles the escape characters appropriately, so
no changes were required there.
ASTERISK-15858 #close
Reported by: Humberto Figuera
ASTERISK-26057 #close
Reported by: Stepan
Change-Id: I93117fbb874189ae819f4a31222df7c82cd20efa
There were two specific issues resolved here:
1) The code that iterated over the required fields
(via ast_realtime_require) was broken for the RQ_INTEGER1 field
type. Iteration would stop when the first RQ_INTEGER1 (0) field
was encountered.
2) sqlite3_changes() was used to try and count the number of rows
returned by a SELECT statement. sqlite3_changes() only counts
affected rows, so this was always returning the value from the
most recent data modification statement. We now separate read-only
queries from data modification queries and count rows appropriately
in both cases.
ASTERISK-23457 #close
Reported by: Scott Griepentrog
Change-Id: I91ed20494efc3fcfbc2a96ac7646999a49814884
This patch fixes 2 original issues and more that those 2 exposed.
* When we send a NOTIFY, and the client either doesn't respond or
responds with a non OK, pjproject only calls our
pubsub_on_evsub_state callback, no others. Since
pubsub_on_evsub_state (which does the sub_tree cleanup) does not
expect to be called back without the other callbacks being called
first, it just returns leaving the sub_tree orphaned. Now
pubsub_on_evsub_state checks the event for PJSIP_EVENT_TSX_STATE
which is what pjproject will set to tell us that it was the
transaction that timed out or failed and not the subscription
itself timing our or being terminated by the client. If is
TSX_STATE, pubsub_on_evsub_state now does the proper cleanup
regardless of the state of the subscription.
* When a client renews a subscription, we don't update the
persisted subscription with the new expires timestamp. This causes
subscription_persistence_recreate to prune the subscription if/when
asterisk restarts. Now, pubsub_on_rx_refresh calls
subscription_persistence_update to apply the new expires timestamp.
This exposed other issues however...
* When creating a dialog from rdata (which sub_persistence_recreate
does from the packet buffer) there must NOT be a tag on the To
header (which there will be when a client refreshes a
subscription). If there is one, pjsip_dlg_create_uas will fail.
To address this, subscription_persistence_update now accepts a flag
that indicates that the original packet buffer must not be updated.
New subscribes don't set the flag and renews do. This makes sure
that when the rdata is recreated on asterisk startup, it's done
from the original subscribe packet which won't have the tag on To.
* When creating a dialog from rdata, we were setting the dialog's
remote (SUBSCRIBE) cseq to be the same as the local (NOTIFY) cseq.
When the client tried to resubscribe after a restart with the
correct cseq, we'd reject the request with an Invalid CSeq error.
* The acts of creating a dialog and evsub by themselves when
recreating a subscription does NOT restart pjproject's subscription
timer. The result was that even if we did correctly recreate the
subscription, we never removed it if the client happened to go away
or send a non-OK response to a NOTIFY. However, there is no
pjproject function exposed to just set the timer on an evsub that
wasn't created by an incoming subscribe request. To address this,
we create our own timer using ast_sip_schedule_task. This timer is
used only for re-establishing subscriptions after a restart.
An earlier approach was to add support for setting pjproject's
timer (via a pjproject patch) and while that patch is still included
here, we don't use that call at the moment.
While addressing these issues, additional debugging was added and
some existing messages made more useful. A few formatting changes
were also made to 'pjsip show scheduled tasks' to make displaying
the subscription timers a little more friendly.
ASTERISK-26696
ASTERISK-26756
Change-Id: I8c605fc1e3923f466a74db087d5ab6f90abce68e
pjsip limits the total number of ICE candidates to PJ_ICE_MAX_CAND,
which is a compile-time constant. Instead of hard-coding 16 when we
enumerate local interfaces, use PJ_ICE_MAX_CAND so that we can
potentially collect more interfaces if the compile time options are
changed.
Tangentially related to ASTERISK~24464
Change-Id: I1b85509e39e33b1fed63c86261fc229ba14bbabd
* app_minivm: Use built-in completion facilities to complete optional
arguments.
* app_voicemail: Use built-in completion facilities to complete
optional arguments.
* app_confbridge: Add missing colons after 'Usage' text.
* chan_alsa: Use built-in completion facilities to complete optional
arguments.
* chan_sip: Use built-in completion facilities to complete optional
arguments. Add completions for 'load' for 'sip show user', 'sip show
peer', and 'sip qualify peer.'
* chan_skinny: Correct and extend completions for 'skinny reset' and
'skinny show line.'
* func_odbc: Correct completions for 'odbc read' and 'odbc write'
* main/astmm: Use built-in completion facilities to complete arguments
for 'memory' commands.
* main/bridge: Correct completions for 'bridge kick.'
* main/ccss: Use built-in completion facilities to complete arguments
for 'cc cancel' command.
* main/cli: Add 'all' completion for 'channel request hangup.' Correct
completions for 'core set debug channel.' Correct completions for 'core
show calls.'
* main/pbx_app: Remove redundant completions for 'core show
applications.'
* main/pbx_hangup_handler: Remove unused completions for 'core show
hanguphandlers all.'
* res_sorcery_memory_cache: Add completion for 'reload' argument of
'sorcery memory cache stale' and properly implement.
Change-Id: Iee58c7392f6fec34ad9d596109117af87697bbca
This change adds the media stream topology definition and API for
accessing and using it.
Some refactoring of the stream was also done.
ASTERISK-26786
Change-Id: Ic930232d24d5ad66dcabc14e9b359e0ff8e7f568
The original return value corresponded to AST_SIP_AUTHENTICATION_CHALLENGE
but we have no authenticator registered to create the challenge.
Change-Id: I62368180d774b497411b80fbaabd0c80841f8512
In Asterisk 11, if the 'Originate' AMI command failed to connect the provided
Channel while in extension mode, a 'failed' extension would be looked up and
run. This was, I believe, unintentionally removed in 51b6c49. This patch
restores that behavior.
This also adds an enum for the various 'synchronous' modes in an attempt to
make them meaningful.
ASTERISK-26115 #close
Reported by: Nasir Iqbal
Change-Id: I8afbd06725e99610e02adb529137d4800c05345d
This reverts commit 6492e91392.
The change in question was intended to prevent the need to reload in
order to update qualifies on contacts when an AOR changes. However, this
ended up causing a deadlock instead.
Change-Id: I1a835c90a5bb65b6dc3a1e94cddc12a4afc3d71e
The adding and removing of device state subscriptions did not protect
fully against simultaneous manipulation. In particular the subscribe
case allowed a small window where two subscriptions could be added for
the same device state instead of just one.
This change makes the code hold the subscriptions lock for the entirety
of each operation to ensure that two are not occurring at the same time.
ASTERISK-26770
Change-Id: I3e7f8eb9d09de440c9024d2dd52029f6f20e725b
A dialplan intercept routine is equivalent to an interrupt routine. As
such, the routine must be done quickly and you do not have access to the
media stream. These restrictions are necessary because the media stream
is the responsibility of some other code and interfering with or delaying
that processing is bad. A possible future dialplan processing
architecture change may allow the interception routine to run in a
different thread from the main thread handling the media and remove the
execution time restriction.
* Made res_agi.c:run_agi() running an AGI in an interception routine run
in DeadAGI mode. No touchy channel frames.
ASTERISK-25951
ASTERISK-26343
ASTERISK-26716
Change-Id: I638f147ca7a7f2590d7194a8ef4090eb191e4e43
Prior to this change, qualifies would only update in the following
cases:
* A reload of res_pjsip.so was issued.
* A dynamic contact was re-registered after its AOR's qualify_frequency
had been changed
This does not work well if you are using realtime for your AORs. You can
update your database to have a new qualify_frequency, but the permanent
contacts on that AOR will not have their qualifies updated. And the
dynamic contacts on that AOR will not have their qualifies updated until
the next registration, which could be a long time.
This change seeks to fix this problem by making it so that whenever AOR
configuration is applied, the contacts pertaining to that AOR have their
qualifies updated.
Additions from this patch:
* AOR sorcery objects now have an apply handler that calls into a newly
added function in the OPTIONS code. This causes all contacts
associated with that AOR to re-schedule qualifies.
* When it is time to qualify a contact, the OPTIONS code checks to see
if the AOR can still be retrieved. If not, then qualification is
canceled on the contact.
Alterations from this patch:
* The registrar code no longer updates contact's qualify_frequence and
qualify_timeout. There is no point to this since those values already
get updated when the AOR changes.
* Reloading res_pjsip.so no longer calls the OPTIONS initialization
function. Reloading res_pjsip.so results in re-loading AORs, which
results in re-scheduling qualifies.
Change-Id: I2e7c3316da28f389c45954f24c4e9389abac1121
There are some error cases in PJSIP when sending a request that will
result in the callback for the request being invoked. The code did not
handle this case and assumed on every error case that the callback was not
invoked.
The code has been changed to check whether the callback has been invoked
and if so to absorb the error and treat it as a success.
ASTERISK-26679
ASTERISK-26699
Change-Id: I563982ba204da5aa1428989a11c06dd9087fea91
Before Asterisk 13, signed linear was converted into network byte order by a
smoother before being sent over the network. We restore this behavior by
forcing the creation of a smoother when slinear is in use and setting the
appropriate flags so that the byte order conversion is always done.
ASTERISK-24858 #close
Reported-by: Frankie Chin
Change-Id: I868449617d1a7819578f218c8c6b2111ad84f5a9
The escalator works by creating a set of startup commands in cli.conf
that set up logger channels and issue the debug commands for the
subsystems specified. If asterisk is running when it is executed,
the same commands will be issued to the running instance. The original
cli.conf is saved before any changes are made and can be restored by
executing '$prog --reset'.
The log output will be stored in...
$astlogdir/message.$uniqueid
$astlogdir/debug.$uniqueid
$astlogdir/dtmf.$uniqueid
$astlogdir/fax.$uniqueid
$astlogdir/security.$uniqueid
$astlogdir/pjsip_history.$uniqueid
$astlogdir/sip_history.$uniqueid
Some minor tweaks were made to chan_sip, and res_pjsip_history
so their history output could be send to a log channel as packets
are captured.
A minor tweak was also made to manager so events are output to verbose
when "manager set debug on" is issued.
Change-Id: I799f8e5013b86dc5282961b27383d134bf09e543
This change adds a missing unreference of the hostname when resolving and
also cleans up the iterator.
ASTERISK-26735
Change-Id: Ic012ebaf3d89e714eec340b7b0c5e63c66af857a
Marking an object as stale in a memory cache is supposed to prime the
cache so that the next time the item is retrieved, the stale item is
deleted from the cache and a background task is run to re-populate the
cache with a fresh version of the object.
The problem is, there are some object types out there for which there is
no natural reason that they would be retrieved from the backend with any
regularity. Outbound PJSIP registrations are a good example of this. At
startup, they are read, and an object-specific state is created that
refers to the initially-retrieved object for all time.
Adding the "reload" option to the CLI/AMI commands gives the cache the
opportunity to manually re-retrieve the object from the backend, both
storing the new object in the cache and applying the new object's
configuration to the module that uses that object.
Change-Id: Ieb1fe7270ceed491f057ec5cbf0e097bde96c5c8
* channel.c:ast_sendtext(): Fix T.140 SendText memory leak.
* format_compatibility.c: T.140 RED and T.140 were swapped.
* res_rtp_asterisk.c:rtp_red_init(): Fix ast_format_t140_red ref leak.
* res_rtp_asterisk.c:rtp_red_init(): Fix data race after starting periodic
scheduled red_write().
* res_rtp_asterisk.c: Some other minor misc tweaks.
Change-Id: Ifa27a2e0f8a966b1cf628607c86fc4374b0b88cb
When configuring a match using a netmask the error variable was
not defaulting to 0. For some people this would cause the code
to think an error occurred when adding the match when in reality
it added perfectly fine.
ASTERISK-26693
Change-Id: I850c250813742bddde65c84e739093c9e01dfe56
The mechanism used for detecting the maximum log level compiled into the
linked pjproject did not work. The API call simply stores the requested
level into an integer and does no range checking. Asterisk was assuming
that there was range checking and limited the new value to the allowable
range. To get the actual maximum log level compiled into the linked
pjproject we need to get and save off the initial set log level from
pjproject. This is the maximum log level supported.
* Get and save off the initial log level setting before altering it to the
desired level on startup. This has to be done by a macro rather than
calling a core function to avoid incorrectly linking pjproject.
* Split the initial log level warning messages to warn if the linked
pjproject cannot support the requested startup level and if it is too low
to get the pjproject buildopts for "pjproject show buildopts".
* Adjust the CLI "pjproject set log level" to check the saved max log
level and to generate normal output messages instead of a warning message.
ASTERISK-26743 #close
Change-Id: I40aa76653e2a1dece66c3f8734594b4f0471cfb4
If endpoint ACLs were specified, they were not being freed
when endpoints were destroyed. On systems with realtime endpoints, this
could add up quickly since each DB lookup would allocate the ACL without
freeing it.
ASTERISK-26731 #close
Reported by Ustinov Artem
Change-Id: Ie1f8bf5b7a0de628c975beba01e69c56893331ad
The 'ari set debug' command has been enhanced to accept 'all' as an
application name. This allows dumping of all apps even if an app
hasn't registered yet. To accomplish this, a new global_debug global
variable was added to res/stasis/app.c and new APIs were added to
set and query the value.
'ari set debug' now displays requests and responses as well as events.
This required refactoring the existing debug code.
* The implementation for 'ari set debug' was moved from stasis/cli.{c,h}
to ari/cli.{c,h}, and stasis/cli.{c,h} were deleted.
* In order to print the body of incoming requests even if a request
failed, the consumption of the body was moved from the ari stubs
to ast_ari_callback in res_ari.c and the moustache templates were
then regenerated. The body is now passed to ast_ari_invoke and then
on to the handlers. This results in code savings since that template
was inserted multiple times into all the stubs.
An additional change was made to the ao2_str_container implementation
to add partial key searching and a sort function. The existing cli
code assumed it was already there when it wasn't so the tab completion
was never working.
Change-Id: Ief936f747ce47f1fb14035fbe61152cf766406bf
(cherry picked from commit 1d890874f3)
An option has been added, srv_lookups, which controls whether
SRV lookups are performed on the provided match hosts or not.
It was possible for this option to be applied after resolution
had already happened.
This change makes it so hosts are stored away, settings are read
and applied, and then resolution is done. This ensures that no
matter the ordering the srv_lookups option is in effect.
ASTERISK-26735
Change-Id: I750378cb277be0140f8c5539450270afbfc43388
This change adds experimental support for providing RTCP
feedback information to codec modules so they can dynamically
change themselves based on conditions.
ASTERISK-26584
Change-Id: Ifd6aa77fb4a7ff546c6025900fc2baf332c31857
Fix the AMI PJSIPShowSubscriptionsInbound, PJSIPShowSubscriptionsOutbound,
and PJSIPShowResourceLists actions event counts. The reported counts may
not necessarily be accurate depending on what happens.
The subscriptions count would be wrong if Asterisk ever has outbound
subscriptions.
The resource list count could be wrong if a list were added or removed
during the AMI action being processed.
Change-Id: I4344301827523fa174960a42c413fd19abe4aed5
This change implements SRV support for the IP based endpoint
identifier module. All possible addresses through SRV are looked
up and added as matches. If no SRV records are available a
fallback to normal host resolution is done. If an IP address
is provided then no SRV lookup occurs.
This is configured using the "srv_lookups" option on the
identify section and defaults to "yes".
ASTERISK-26693
Change-Id: I6b641e275bf96629320efa8b479737062aed82ac
Adds the ability for extensions to be registered to include filename and
line number so that dialplan show output can show the filename and line
number of a config file responsible for generating a given extension.
This only affects config modules that are written to use the new extension
registering functions. In this patch, that only includes pbx_config, so
extensions registered in extensions.conf and any included extension will
be shown in this manner. Extensions registered in this manner will show
the filename and line number *instead* of the registrar.
ASTERISK-26658 #close
Reported by: Jonathan R. Rose
Change-Id: Ieccc6abccdff34ed5c7da3511fd24972b8f2dd30
This feature was available in the SIP channel driver chan_sip. For example,
Asterisk is the outbound proxy and has to handle all SIP-URIs, even domains not
local to Asterisk. In that case, SIPDOMAIN is used in the Dialplan, to detect
and dial remote SIP-URIs. This change here sets the SIP destination domain of
an inbound call (SIPDOMAIN) in the SIP channel driver res_pjsip as well.
ASTERISK-26670 #close
Change-Id: I27c880dc404a3c1c6792e1ba3545475339577243
When "fetch_again_at_reload" is set in config, we create now
new object and thread for each reloaded calendar (with new
configuration). Old calendar should be then unlinked, so the
old thread can exit and free memory.
ASTERISK-26683
Change-Id: Ic17fba9371c5a8b26a6bc54ea4957c13a32a343e
refer_incoming_refer_request needed to look for the "r" header as well
as the "Refer-To" header.
ASTERISK-26655 #close
patches:
refer_compact_fix.diff submitted by JoshE (license 6075)
Change-Id: I610410a99b02427ea5db887aeb454d5f12c2259f
ast_rtp_remote_address_set() could pass an uninitialized 'us' parameter to
ast_ouraddrfor(). If ast_ouraddrfor() returns an error then the 'us'
parameter may not get initialized. Thus when the code tries to save the
'us' parameter to the local address we could try to copy a ridiculous
sized memory buffer and segfault.
* Made pass an initialized 'us' parameter to ast_ouraddrfor().
* Optimized out the 'us' struct variable.
ASTERISK-26672 #close
Change-Id: I4acea5dcdf0813da2c7d3e11c2d6067d160d17dc
We access uninitialized memory when the 'ourip' parameter does not
have an initial guess to our IP address.
ASTERISK-26672
Change-Id: I35507ea1ad7455d2be188f6ccdd4add7bd150e15
Joshua Colp
George Joseph
Kevin Harwell
Jenkins2
Torrey Searle
Corey Farrell
Benjamin Keith Ford
Richard Mudgett
Sean Bright
Mark Michelson
Alexei Gradinari
Jan Friesse
Jørgen H
Martin Tomec
Yasin CANER
Alexander Traud
zuul
Daniel Journo
Richard Begg
Matt Jordan
Lorenzo Miniero
Jonathan R. Rose
Joshua Elson