The only caller of cdr_object_fn_table.process_party_b() explicitly does
the check before calling.
Change-Id: Ib0c53cdf5048227842846e0df9d2c19117c45618
Since ASTERISK-26922, this issue affected only those chan_sip which were
* enabled for dual-stack (bindaddr=::), and
* enabled for TCP (tcpenable=yes) and/or TLS (tlsenable=yes), and
* tried to register and/or invite a IPv4-only service,
* via TCP and/or TLS.
Now, ast_tcptls_client_create does not re-bind to [::] anymore.
ASTERISK-27324 #close
Change-Id: I4b242837bdeb1ec7130dc82505c6180a946fd9b5
ast_strings_match uses sscanf and checks for non-zero return to verify a
token was parsed. This is incorrect as sscanf returns EOF (-1) for errors.
ASTERISK-27318 #close
Change-Id: Ifcece92605f58116eff24c5a0a3b0ee08b3c87b1
Some endpoints do not like a stream being reused for a new
media stream. The frame/jitterbuffer can rely on underlying
attributes of the media stream in order to order the packets.
When a new stream takes its place without any notice the
buffer can get confused and the media ends up getting dropped.
This change uses the SSRC change to determine that a new source
is reusing an existing stream and then bridge_softmix renegotiates
each participant such that they see a new media stream. This
causes the frame/jitterbuffer to start fresh and work as expected.
ASTERISK-27277
Change-Id: I30ccbdba16ca073d7f31e0e59ab778c153afae07
When a sip session is refreshed, the stream topology is looped
through, checking each stream for compatible formats. This would
cause a crash if the stream state was AST_STREAM_STATE_REMOVED,
since the formats would never be set for this stream, causing
a NULL value to be returned from ast_stream_get_formats. This
commit adds a check for streams with removed states.
Also removed a stray semicolon.
Change-Id: Ic86f8b65a4a26a60885b28b8b1a0b22e1b471d42
When two channels were early bridged in a native_rtp bridge, the RTP description
on one side was not updated when the other side answered.
This patch forbids non-answered channels to enter a native_rtp bridge, and
triggers a bridge reconfiguration when an ANSWER frame is received.
ASTERISK-27257
Change-Id: If1aaee1b4ed9658a1aa91ab715ee0a6413b878df
The Websocket implementation will steal the underlying stream of
TCP/TLS sessions. This results in an error message being output
about a stream not being present when in reality this is actually
fine.
This change moves it to a debug message instead.
Change-Id: I66cc639080b4b4599beadb4faa7d313f2721d094
A new endpoint parameter "incoming_mwi_mailbox" allows Asterisk to
receive unsolicited MWI NOTIFY requests and make them available to
other modules via the stasis message bus.
res_pjsip_pubsub has a new handler "pubsub_on_rx_mwi_notify_request"
that parses a simple-message-summary body and, if
endpoint->incoming_mwi_account is set, calls ast_publish_mwi_state
with the voice-message counts from the message.
Change-Id: I08bae3d16e77af48fcccc2c936acce8fc0ef0f3c
If an error occurs during a bridge impart it's possible that
the "bridge_after" callback might try to run before
control_swap_channel_in_bridge has been signalled to continue.
Since control_swap_channel_in_bridge is holding the control lock
and the callback needs it, a deadlock will occur.
* control_swap_channel_in_bridge now only holds the control
lock while it's actually modifying the control structure and
releases it while the bridge impart is running.
* bridge_after_cb is now tolerant of impart failures.
Change-Id: Ifd239aa93955b3eb475521f61e284fcb0da2c3b3
In 2dee95cc (ASTERISK-27024) and 776ffd77 (ASTERISK-26879) there was
confusion about whether the transport_state->localnet ACL has ALLOW or
DENY semantics.
For the record: the localnet has DENY semantics, meaning that "not in
the list" means ALLOW, and the local nets are in the list.
Therefore, checks like this look wrong, but are right:
/* See if where we are sending this request is local or not, and if
not that we can get a Contact URI to modify */
if (ast_apply_ha(transport_state->localnet, &addr) != AST_SENSE_ALLOW) {
ast_debug(5, "Request is being sent to local address, "
"skipping NAT manipulation\n");
(In the list == localnet == DENY == skip NAT manipulation.)
And conversely, other checks that looked right, were wrong.
This change adds two macro's to reduce the confusion and uses those
instead:
ast_sip_transport_is_nonlocal(transport_state, addr)
ast_sip_transport_is_local(transport_state, addr)
ASTERISK-27248 #close
Change-Id: Ie7767519eb5a822c4848e531a53c0fd054fae934
An admin can configure app_minivm with an externnotify program to be run
when a voicemail is received. The app_minivm application MinivmNotify
uses ast_safe_system() for this purpose which is vulnerable to command
injection since the Caller-ID name and number values given to externnotify
can come from an external untrusted source.
* Add ast_safe_execvp() function. This gives modules the ability to run
external commands with greater safety compared to ast_safe_system().
Specifically when some parameters are filled by untrusted sources the new
function does not allow malicious input to break argument encoding. This
may be of particular concern where CALLERID(name) or CALLERID(num) may be
used as a parameter to a script run by ast_safe_system() which could
potentially allow arbitrary command execution.
* Changed app_minivm.c:run_externnotify() to use the new ast_safe_execvp()
instead of ast_safe_system() to avoid command injection.
* Document code injection potential from untrusted data sources for other
shell commands that are under user control.
ASTERISK-27103
Change-Id: I7552472247a84cde24e1358aaf64af160107aef1
A video update frame is used to indicate that a channel
with video negotiated should provide a full frame so the
decoder decoding the stream is able to do so. In situations
where a queue is used to store frames it makes no sense
for the queue to contain multiple video update frames. One
is sufficient to have a full frame be sent.
ASTERISK-27222
Change-Id: Id3f40a6f51b740ae4704003a1800185c0c658ee7
* Add protection checks when mapping streams to the bridge. The channel
and bridge may be in the process of updating the stream mapping when a
media frame comes in so we may not be able to map the frame at the time.
* We need to map the streams to the bridge's stream numbers right before
they are written into the bridge. That way we don't have to keep
locking/unlocking the bridge and we won't have any synchronization
problems before the frames actually go into the bridge.
* Protect the deferred queue with the bridge_channel lock.
ASTERISK-27212
Change-Id: Id6860dd61b594b90c8395f6e2c0150219094c21a
* Fix deadlock in
bridge_softmix.c:softmix_bridge_stream_topology_changed() between
bridge_channel and channel locks.
* The new bridge technology topology change callbacks must be called with
the bridge locked. The callback references the bridge channel list, the
bridge technology could change, and the bridge stream mapping is updated.
ASTERISK-27212
Change-Id: Ide4360ab853607e738ad471721af3f561ddd83be
* ast_channel_request_stream_topology_change() must not be called with any
channel locks held.
* ast_channel_stream_topology_changed() must be called with only the
passed channel lock held.
ASTERISK-27212
Change-Id: I843de7956d9f1cc7cc02025aea3463d8fe19c691
When the iostream code went in it introduced a conditional that made it so the
hook event was not being raised even if a hook is present. This patch adds a
check to see if a hook is present in astman_append. If so then call into the
send_string function, which in turn raises the even for specified hook.
Also updated the ami hooks unit test, so the test could be automated.
ASTERISK-27200 #close
Change-Id: Iff37f02f9708195d8f23e68f959d6eab720e1e36
* netsock2.c: Test the addr->len member first as it may be the only member
initialized in the struct.
* stun.c:ast_stun_handle_packet(): The combinded[] local array could get
used uninitialized by ast_stun_request(). The uninitialized string gets
copied to another location and could overflow the destination memory
buffer.
These valgrind findings were found for ASTERISK_27150 but are not
necessarily a fix for the issue.
Change-Id: I55f8687ba4ffc0f69578fd850af006a56cbc9a57
This change fixes a few locking issues and some video misrouting.
1. When accessing the stream topology of a channel the channel lock
must be held to guarantee the topology remains valid.
2. When a channel was joined to a bridge the bridge specific
implementation for stream mapping was not invoked, causing video
to be misrouted for a brief period of time.
ASTERISK-27182
Change-Id: I5d2f779248b84d41c5bb3896bf22ba324b336b03
joint_cap needs to be released unconditionally as chan->tech->requester
does not steal the reference even on success.
ASTERISK-27180 #close
Change-Id: I647728992559bdb0a9c7357c20be1b36400d68b6
GCC 7 has added capability to produce warnings, this fixes most of those
warnings. The specific warnings are disabled in a few places:
* app_voicemail.c: truncation of paths more than 4096 chars in many places.
* chan_mgcp.c: callid truncated to 80 chars.
* cdr.c: two userfields are combined to cdr copy, fix would break ABI.
* tcptls.c: ignore use of deprecated method SSLv3_client_method().
ASTERISK-27156 #close
Change-Id: I65f280e7d3cfad279d16f41823a4d6fddcbc4c88
The seconds and minutes files have always existed in the base language
directory of the Core package. So say.c has always been calling the wrong
location (under digits/) for those two files and in the case of second and
minute they didn't exist in the Core packages at all.
The 1.6 sounds release moves the second and minute files into Core from
Extra for the languages that already had them. A future release will include
the second and minute files for languages that didn't already have them.
This patch just changes all the target locations for second, seconds,
minute, and minutes that were under the digits subdir to be under the root of
sounds instead. Which is where the sounds will be for some languages after 1.6
sounds and for all languages after a future release.
ASTERISK-25810 #close
Change-Id: I05d9d4bee6a7237030530a46e7eb3df15f13f702
Reported-by: Nicolas Riendeau
This change does a few things to improve packet loss and renegotiation:
1. On outgoing RTP streams we will now properly reflect out of order
packets and packet loss in the sequence number. This allows the
remote jitterbuffer to better reorder things.
2. Video updates can now be discarded for a period of time
after one has been sent to prevent flooding of clients.
3. For declined and removed streams we will now release any
media session resources associated with them. This was not
previously done and caused an issue where old state was being
used for a new stream.
4. RTP bundling was not actually removing bundled RTP instances
from the parent. This has been resolved by removing based on
the RTP instance itself and not the SSRC.
5. The code did not properly handle explicitly unbundling an
RTP instance from its parent. This now works as expected.
ASTERISK-27143
Change-Id: Ibd91362f0e4990b6129638e712bc8adf0899fd45
This adds support for parsing timelen values from config files. This
includes support for all flags which apply to PARSE_INT32. Support for
this parser is added to ACO via the OPT_TIMELEN_T option type.
Fixes an issue where extra characters provided to ast_app_parse_timelen
were ignored, they now cause an error.
Testing is included.
ASTERISK-27117 #close
Change-Id: I6b333feca7e3f83b4ef5bf2636fc0fd613742554
BUNDLE is a specification used in WebRTC to allow multiple
streams to use the same underlying transport. This reduces
the number of ICE and DTLS negotiations that has to occur
to 1 normally.
This change implements this by adding support for it to
the RTP SDP module in PJSIP. BUNDLE can be turned on using
the "bundle" option and on an offer we will offer to
bundle streams together. On an answer we will accept any
bundle groups provided. Once accepted each stream is bundled
to another RTP instance for transport.
For the res_rtp_asterisk changes the ability to bundle
an RTP instance to another based on the SSRC received
from the remote side has been added. For outgoing traffic
if an RTP instance is bundled to another we will use the
other RTP instance for any transport related things. For
incoming traffic received from the transport instance we
look up the correct instance based on the SSRC and use it
for any non-transport related data.
ASTERISK-27118
Change-Id: I96c0920b9f9aca7382256484765a239017973c11
This adds a parameter to ast_waitfordigit_full which can be used to only
stop waiting when certain expected digits are received. Any unexpected
DTMF digits are simply ignored.
This also creates a new dialplan application WaitDigit.
ASTERISK-27129 #close
Change-Id: Id233935ea3d13e71c75a0861834c5936c3700ef9
This change fixes a few things uncovered during SFU testing.
1. Unreal channels incorrectly forwarded video frames when
no video stream was present on them. This caused a crash when
they were read as the core requires a stream to exist for the
underlying media type. The Unreal channel will now ensure a
stream exists for the media type before forwarding the frame
and if no stream exists then the frame is dropped.
2. Mapping of frames during bridging from the stream number of
the underlying channel to the stream number of the bridge was
done in the wrong location. This resulted in the frame getting
dropped. This mapping now occurs on reading of the frame from
the channel.
3. Bridging was using the wrong ast_read function resulting in
it living in a non-multistream world.
4. In bridge_softmix when adding new streams to existing channels
the wrong stream topology was copied resulting in no streams
being added.
Change-Id: Ib7445722c3219951d6740802a0feddf2908c18c8
Setting maxfiles (maximum number of open files) has no practical
effect on a remote asterisk (rasterisk, rasterisk -x).
It has an ill effect of printing an extra message, which
may be annoying in case of -x.
ASTERISK-27105 #close
Change-Id: Iaf9eb344e4b4b517df91b736b27ec55f6a6921a2
Messages like "fwrite() failed: Connection reset by peer" are no
help whatsoever, especially since they can be caused simply by a
client disconnecting.
* Make those WARNINGs DEBUGs.
* Check the return from ast_iostream_printf of headers.
Change-Id: I17bd5f3621514152a7b2b263c801324c5e96568b
This API was not actively maintained, was not added to new modules
(such as res_pjsip), and there exist better alternatives to acquire the
same information, such as the ARI.
Change-Id: I4b2185a83aeb74798b4ad43ff8f89f971096aa83
Clear channel flag AST_FLAG_END_DTMF_ONLY in ast_waitfordigit_full when
ast_read returns NULL.
ASTERISK-27100 #close
Change-Id: Id3039e9a4e74e0cb359f636c9fd0c9740ebf7d9d
The stream topology (list of streams and order) is now stored with the
configured PJSIP endpoints and used during the negotiation process.
Media negotiation state information has been changed to be stored
in a separate object. Two of these objects exist at any one time
on a session. The active media state information is what was previously
negotiated and the pending media state information is what the
media state will become if negotiation succeeds. Streams and other
state information is stored in this object using the index (or
position) of each individual stream for easy lookup.
The ability for a media type handler to specify a callback for
writing has been added as well as the ability to add file
descriptors with a callback which is invoked when data is available
to be read on them. This allows media logic to live outside of
the chan_pjsip module.
Direct media has been changed so that only the first audio and
video stream are directly connected. In the future once the RTP
engine glue API has been updated to know about streams each individual
stream can be directly connected as appropriate.
Media negotiation itself will currently answer all the provided streams
on an offer within configured limits and on an offer will use the
topology created as a result of the disallow/allow codec lines.
If a stream has been removed or declined we will now mark it as such
within the resulting SDP.
Applications can now also request that the stream topology change.
If we are told to do so we will limit any provided formats to the ones
configured on the endpoint and send a re-invite with the new topology.
Two new configuration options have also been added to PJSIP endpoints:
max_audio_streams: determines the maximum number of audio streams to
offer/accept from an endpoint. Defaults to 1.
max_video_streams: determines the maximum number of video streams to
offer/accept from an endpoint. Defaults to 1.
ASTERISK-27076
Change-Id: I8afd8dd2eb538806a39b887af0abd046266e14c7
In an earlier version of Asterisk a local channel [un]lock all functions were
added in order to keep a crash from occurring when a channel hung up too early
during an attended transfer. Unfortunately, when a transfer failure occurs and
depending on the timing, the local channels sometime do not get properly
unlocked and deref'ed after being locked and ref'ed. This happens because the
underlying local channel structure gets NULLed out before unlocking.
This patch reworks those [un]lock functions and makes sure the values that get
locked and ref'ed later get unlocked and deref'ed.
ASTERISK-27074 #close
Change-Id: Ice96653e29bd9d6674ed5f95feb6b448ab148b09
If an attended transfer failed it was possible for some of the channels
involved to get "stuck" because Asterisk was not hanging up the transfer target.
This patch ensures Asterisk hangs up the transfer target when an attended
transfer failure occurs.
ASTERISK-27075 #close
Change-Id: I98a6ecd92d3461ab98c36f0d9451d23adaf3e5f9
* Update SDP unit tests to test negotiating with declined streams.
Generation of declined m= lines created and responded tested.
Change-Id: I5cb99f5010994ab0c7d9cf2d395eca23fab37b98
The SDP offer/answer model requires an answer to an offer before a new SDP
can be processed. This allows our local SDP creation to be deferred until
we know that we need to create an offer or an answer SDP. Once the local
SDP is created it won't change until the SDP negotiation is restarted.
An offer SDP in an initial SIP INVITE can receive more than one answer
SDP. In this case, we need to merge each answer SDP with our original
offer capabilities to get the currently negotiated capabilities. To
satisfy this requirement means that we cannot update our proposed
capabilities until the negotiations are restarted.
Local topology updates from ast_sdp_state_update_local_topology() are
merged together until the next offer SDP is created. These accumulated
updates are then merged with the current negotiated capabilities to create
the new proposed capabilities that the offer SDP is built.
Local topology updates are merged in several passes to attempt to be smart
about how streams from the system are matched with the previously
negotiated stream slots. To allow for T.38 support when merging, type
matching considers audio and image types to be equivalent. First streams
are matched by stream name and type. Then streams are matched by stream
type only. Any remaining unmatched existing streams are declined. Any
new active streams are either backfilled into pre-merge declined slots or
appended onto the end of the merged topology. Any excess new streams
above the maximum supported number of streams are simply discarded.
Remote topology negotiation merges depend if the topology is an offer or
answer. An offer remote topology negotiation dictates the stream slot
ordering and new streams can be added. A remote offer can do anything to
the previously negotiated streams except reduce the number of stream
slots. An answer remote topology negotiation is limited to what our offer
requested. The answer can only decline streams, pick codecs from the
offered list, or indicate the remote's stream hold state.
I had originally kept the RTP instance if the remote offer SDP changed a
stream type between audio and video since they both use RTP. However, I
later removed this support in favor of simply creating a new RTP instance
since the stream's purpose has to be changing anyway. Any RTP packets
from the old stream type might cause mischief for the bridged peer.
* Added ast_sdp_state_restart_negotiations() to restart the SDP
offer/answer negotiations. We will thus know to create a new local SDP
when it is time to create an offer or answer.
* Removed ast_sdp_state_reset(). Save the current topology before
starting T.38. To recover from T.38 simply update the local topology to
the saved topology and restart the SDP negotiations to get the offer SDP
renegotiating the previous configuration.
* Allow initial topology for ast_sdp_state_alloc() to be NULL so an
initial remote offer SDP can dictate the streams we start with. We can
always update the local topology later if it turns out we need to offer
SDP first because the remote chose to defer sending us a SDP.
* Made the ast_sdp_state_alloc() initial topology limit to max_streams,
limit to configured codecs, handle declined streams, and discard
unsupported types.
* Convert struct ast_sdp to ao2 object. Needed to easily save off a
remote SDP to refer to later for various reasons such as generating
declined m= lines in the local SDP.
* Improve converting remote SDP streams to a topology including stream
state. A stream state of AST_STREAM_STATE_REMOVED indicates the stream is
declined/dead.
* Improve merging streams to take into account the stream state.
* Added query for remote hold state.
* Added maximum streams allowed SDP config option.
* Added ability to create new streams as needed. New streams are created
with configured default audio, video, or image codecs depending on stream
type.
* Added global locally_held state along with a per stream local hold
state. Historically, Asterisk only has a global locally held state
because when the we put the remote on hold we do it for all active
streams.
* Added queries for a rejected offer and current SDP negotiation role.
The rejected query allows the using module to know how to respond to a
failed remote SDP set. Should the using module respond with a 488 Not
Acceptable Here or 500 Internal Error to the offer SDP?
* Moved sdp_state_capabilities.connection_address to ast_sdp_state. There
seems no reason to keep it in the sdp_state_capabilities struct since it
was only used by the ast_sdp_state.proposed_capabilities instance.
* Callbacks are now available to allow the using module some customization
of negotiated streams and to complete setting up streams for use. See the
typedef doxygen for each callback for what is allowable and when they are
called.
* Added topology answerer modify callback.
* Added topology pre and post apply callbacks.
* Added topology offerer modify callback.
* Added topology offerer configure callback.
* Had to rework the unit tests because I changed how SDP topologies are
merged. Replaced several unit tests with new negotiation tests.
Change-Id: If07fe6d79fbdce33968a9401d41d908385043a06
This change adds support for socket activation of certain SOCK_STREAM
listeners in Asterisk:
* AMI / AMI over TLS
* CLI
* HTTP / HTTPS
Example systemd units are provided. This support extends to any socket
which is initialized using ast_tcptls_server_start, so any unknown
modules using this function will support socket activation.
Asterisk continues to function as normal if socket activation is not
enabled or if systemd development headers are not available during
build.
ASTERISK-27063 #close
Change-Id: Id814ee6a892f4b80d018365c8ad8d89063474f4d
When a stasis channel is stolen by another app, the control
structure is unreffed but never unlinked from the app_controls
container. This causes the channel reference to leak.
Added OBJ_UNLINK to the callback in channel_stolen_cb.
Also added some additional channel lifecycle debug messages to
channel.c.
ASTERISK-27059 #close
Repoorted-by: George Joseph
Change-Id: Ib820936cd49453f20156971785e7f4f182c56e14
Not easy to reproduce, but we have noticed deadlocks when unloading a module
while dialplan is handling a request.
The deadlock is between :
1) Dialplan execution: pbx_extension_helper() first taking conlock,
then pbx_findapp() [when called] asking for lock on apps list.
2) Application unregistration: ast_unregister_application() first taking lock
on apps list, then unreference_cached_app() [when called] asking for conlock.
As a protection, I suggest to modify ast_unregister_application(), so that it
anticipates the need of conlock, before taking the lock on apps list.
The side effect is a longer unavailability of conlock when unregistering an
application.
ASTERISK-27041
Change-Id: I0db0f1eb320da6a5758cce3a47d765be1face8e2
* changes:
SDP: Set the remote c= line in RTP instance.
SDP: Add t= line in sdp_create_from_state()
stream: Ignore declined streams for some topology calls.
* Pulled finding the rtcp-mux attribute flag out of the ICE candidate for
loop. Also ordered the RTCP ICE candidate skip test to fail earlier.
Change-Id: I8905d9c68563027a46cd3ae14dbcc27e9c814809
* Made ast_format_cap_from_stream_topology() not include any formats from
declined streams.
* Made ast_stream_topology_get_first_stream_by_type() ignore declined
streams to return the first active stream of the type.
* Updated unit tests to check these changes have the expected effect.
Change-Id: Iabbc6a3e8edf263a25fd3056c3c614407c7897df
The ast_channel_suppress function wrongly decremented the
reference count of the underlying structure used to keep
track of what should be suppressed on a channel if the
function was called multiple times on the same channel.
This change cleans up the reference counting a bit so
this no longer occurs.
ASTERISK-27016
Change-Id: I2eed4077cb4916e6626f9f120b63b963acc5c136
This change adds a deferred queue to bridging. If a bridge
technology determines that a frame can not be written and
should be deferred it can indicate back to bridging to do so.
Bridging will then requeue any deferred frames upon a new
channel joining the bridge.
This change has been leveraged for T.38 request negotiate
control frames. Without the deferred queue there is a race
condition between the bridge receiving the T.38 request
negotiate and the second channel joining and being in the
bridge. If the channel is not yet in the bridge then the T.38
negotiation fails.
A unit test has also been added that confirms that a T.38
request negotiate control frame is deferred when no other
channel is in the bridge and that it is requeued when a new
channel joins the bridge.
ASTERISK-26923
Change-Id: Ie05b08523f399eae579130f4a5f562a344d2e415
FreeBSD does not include a crypt.h include file. Definitions for
crypt() and crypt_r() are in unistd.h
ASTERISK-27042 #close
Change-Id: Ib307ee5e384870c6af50efa89fb73722dd0c3a7e
ASTERISK-26419 introduced a bug when calling ast_audiohook_write_list in
ast_write. It would free the frame given to ast_write if the frame returned
by ast_audiohook_write_list was different than the given one. The frame give
to ast_write should never be freed within that function. It is the caller's
resposibility to free the frame after writing (or when it its done with it).
By freeing it within ast_write this of course led to some memory corruption
problems.
This patch makes it so the frame given to ast_write is no longer freed within
the function. The frame returned by ast_audiohook_write_list is now subsequently
used in ast_write and is freed later. It is freed either after translate if the
frame returned by translate is different, or near the end of ast_write prior to
function exit.
ASTERISK-26973 #close
Change-Id: Ic9085ba5f555eeed12f6e565a638c3649695988b
Before this patch, when a user hung up during a Background, we would
stuff 0xff into a char and attempt a dialplan lookup of it. This caused
problems for some realtime engines which interpreted the value as the
beginning of an invalid UTF-8 sequence.
ASTERISK-19291 #close
Reported by: Andrew Nowrot
Change-Id: I8ca6da93252d61c76ebdb46a4aa65e73ca985358
In review 4843 (ASTERISK-24858), we added a hack that forced a smoother
creation when sending signed linear so that the byte order was adjusted
during transmission. This was needed because smoother flags were lost
during the new format work that was done in Asterisk 13.
Rather than rolling that same hack into res_rtp_multicast, re-introduce
smoother flags so that formats can dictate their own options.
Change-Id: I77b835fba0e539c6ce50014a984766f63cab2c16
A previous commit added plumbing to bridge_softmix to allow for an SFU
experience with Asterisk. This commit adds an option to app_confbridge
that allows for a confbridge to actually make use of the SFU video mode.
SFU mode is implemented in a "set it and forget it" kind of way. That
is, when the bridge is created, if SFU mode is enabled, then the video
mode gets set to SFU and cannot be changed. Future improvements may
allow for a hybrid experience (e.g. forward multiple video streams,
specifically those of the most recent talkers), but for this addition,
no such capability is present.
Change-Id: I87bbcb63dec6dbbb42488f894871b86f112b2020
This sets up the "plumbing" in bridge_softmix to
be able to accommodate Asterisk asking as an SFU
(selective forwarding unit) for conferences.
The way this works is that whenever a channel enters or leaves a
conference, all participants in the bridge get sent a stream topology
change request. The topologies consist of the channels' original
topology, along with video destination streams corresponding to each
participants' source video streams. So for instance, if Alice, Bob, and
Carol are in the conference, and each supplies one video stream, then
the topologies for each would look like so:
Alice:
Audio,
Source video(Alice),
Destination Video(Bob),
Destination video (Carol)
Bob:
Audio,
Source video(Bob)
Destination Video(Alice),
Destination video (Carol)
Carol:
Audio,
Source video(Carol)
Destination Video(Alice),
Destination video (Bob)
This way, video that arrives from a source video stream can then be
copied out to the destination video streams on the other participants'
channels.
Once the bridge gets told that a topology on a channel has changed, the
bridge constructs a map in order to get the video frames routed to the
proper destination streams. This is done using the bridge channel's
stream_map.
This change is bare-bones with regards to SFU support. Some key features
are missing at this point:
* Stream limits. This commit makes no effort to limit the number of
streams on a specific channel. This means that if there were 50 video
callers in a conference, bridge_softmix will happily send out topology
change requests to every channel in the bridge, requesting 50+
streams.
* Configuration. The plumbing has been added to bridge_softmix, but
there has been nothing added as of yet to app_confbridge to enable SFU
video mode.
* Testing. Some functions included here have unit tests.
However, the functionality as a whole has only been verified by
hand-tracing the code.
* Selectivenss. For a "selective" forwarding unit, this does not
currently have any means of being selective.
* Features. Presumably, someone might wish to only receive video from
specific sources. There are no external-facing functions at the moment
that allow for users to select who they receive video from.
* Efficiency. The current scheme treats all video streams as being
unidirectional. We could be re-using a source video stream as a
desetnation, too. But to simplify things on this first round, I did it
this way.
Change-Id: I7c44a829cc63acf8b596a337b2dc3c13898a6c4d
During the channel flag audit an incorrect change was
done. The flag should be cleared on the second channel.
ASTERISK-26469
Change-Id: I770c5a389550a2fb5a6ade942fccbb2e1d9199c8
...that can only be run by explicitly calling it with
'test execute category /DO_NOT_RUN/ name RAISE_SEGV'
This allows us to more easily test CI and debugging tools that
should do certain things when asterisk coredumps.
To allow this a new member was added to the ast_test_info
structure named 'explicit_only'. If set by a test, the test
will be skipped during a 'test execute all' or
'test execute category ...'.
Change-Id: Ia3a11856aae4887df9a02b6b081cc777b36eb6ed
Added functions that convert a string to an unsigned integer or unsigned long.
A couple of unit test were also created to test the routines. The reasons for
adding these conversion utilities (and hopefully eventually more) are as
follows:
* Conversion routines are functionally contained with consistent and
better error checking
* The function names offer a better description of what is happening
* It encourages code reuse for easier bug fixing at a single source
* It's simpler to use
* It's unit testable
For instance, currently in a lot of places when converting to an integer or
similar the "sscanf" function is used. When using "sscanf" it may not be
immediately clear what's happening as it lacks semantic naming. Limited error
checking is usually done as well. For example, most of the time a check is done
to make sure the value converted, but does not check for overflows or negative
valued conversions when converting unsigned numbers.
Why use/wrap "strtoul" and not "sscanf" then? Primarily, it lacks some of the
built in error handling that "strtoul" has. For instance "strtoul" contains
overflow checks. Less so, but can still factor as reasons, "sscanf" is slightly
more complex in its use. And maybe a bit controversial, but it may be ("big if")
potentially slower than "strtoul" in some cases.
Change-Id: If7eaca4a48f8c7b89cc8b5a1f4bed2852fca82bb
When manipulating flags on a channel the channel has to be
locked to guarantee that nothing else is also manipulating
the flags. This change introduces locking where necessary to
guarantee this. It also adds helper functions that manipulate
channel flags and lock to reduce repeated code.
ASTERISK-26789
Change-Id: I489280662dba0f4c50981bfc5b5a7073fef2db10
* changes:
SDP: Make process possible multiple fmtp attributes per rtpmap.
SDP: Explicitly stop a RTP instance before destoying it.
SDP: Rework merge_capabilities().
SDP: Update ast_get_topology_from_sdp() to keep RTP map.
The sdp_state.remote_capabilities was only used inside merge_sdps() and
subsequent calls to merge_sdps() by re-INVITE's would leak them.
Change-Id: I0ceb7838ea044cc913e8ad4a255c39c9740ae0ce
When we optionally set the interface_address we are forcing the media to
go out a specific interface address. This allows us to optionally have
the media go out the interface that SIP signalling came in on or if we are
configured to have the media always go out a specific address.
Change-Id: I160d9fac322a075bd2557b430632544178196189
* Made sdp_add_m_from_rtp_stream() and sdp_add_m_from_udptl_stream()
handle generating disabled/declined streams.
* Added /main/sdp/sdp_merge_asymmetric unit test. It currently does not
check the offerer side negotiated SDP because that isn't the purpose of
this patch and there is much to be done to handle declined/dummy streams.
* Added T.38 image streams to the /main/sdp/sdp_merge_symmetric and
/main/sdp/sdp_merge_crisscross unit tests.
Change-Id: Ib4dcb3ca4f9a9133b376f4e3302f9a1f963f2b31
* Tried to give better variable names.
* Made our SDP answer use the offer's RTP payload types as the SDP RFC
says we SHOULD.
* Updating the local topology now takes the stream format caps. We are
likely preparing to send an offer.
Change-Id: I34d3be8e3036402a8575ffcae3eebc5ce348d7c0
This change uses the functions provided by OpenSSL to query
and better construct error messages for situations where
the connection encounters a problem.
ASTERISK-26606
Change-Id: I7ae40ce88c0dc4e185c4df1ceb3a6ccc198f075b
It is possible to initialize a valid config without a capath
or cafile definition. This will cause a crash on a reload.
This fix ensures capath is always allocated.
ASTERISK-26983 #close
Change-Id: I63ff715d9d9023427543a5b8a4ba7b0d82533c12
All log messages go to a queue serviced by a single thread
which does all the IO. This setting controls how big that
queue can get (and therefore how much memory is allocated)
before new messages are discarded. The default is 1000.
Should something go bezerk and log tons of messages in a tight
loop, this will prevent memory escalation.
When the limit is reached, a WARNING is logged to that effect
and messages are discarded until the queue is empty again. At
that time another WARNING will be logged with the count of
discarded messages. There's no "low water mark" for this queue
because the logger thread empties the entire queue and processes it
in 1 batch before going back and waiting on the queue again.
Implementing a low water mark would mean additional locking as
the thread processes each message and it's not worth it.
A "test" was added to test_logger.c but since the outcome is
non-deterministic, it's really just a cli command, not a unit
test.
Change-Id: Ib4520c95e1ca5325dbf584c7989ce391649836d1
ast_stream_clone() cannot copy the opaque user data stored on a stream.
We don't know how to clone the data so it isn't copied into the clone.
Change-Id: Ia51321bf38ecbfdcc53787ca77ea5fd2cabdf367
menu_template_handler wasn't properly accounting for the fact that
it might be called both during a load/reload (which isn't really
valid but not prevented) and by a dialplan function. In both cases
it was attempting to use the "pending" config which wasn't valid in
the latter case. aco_process_config is also partly to blame because
it wasn't properly cleaning "pending" up when a reload was done and
no changes were made. Both of these contributed to a crash if
CONFBRIDGE(menu,template) was called in a dialplan after a reload.
* aco_process_config now sets info->internal->pending to NULL
after it unrefs it although this isn't strictly necessary in the
context of this fix.
* menu_template_handler now uses the "current" config and silently
ignores any attempt to be called as a result of someone uses the
"template" parameter in the conf file.
Luckily there's no other place in the codebase where
aco_pending_config is used outside of aco_process_config.
ASTERISK-25506 #close
Reported-by: Frederic LE FOLL
Change-Id: Ib349a17d3d088f092480b19addd7122fcaac21a7
When using the Bridge AMI action on the same channel multiple times
it was possible for the channel to return to the wrong location in
the dialplan if the other party hung up. This happened because the
priority of the channel was not preserved across each action
invocation and it would fail to move on to the next priority in
other cases.
This change makes it so that the priority of a channel is preserved
when taking control of it from another thread and it is incremented
as appropriate such that the priority reflects where the channel
should next be executed in the dialplan, not where it may or may not
currently be.
The Bridge AMI action was also changed to ensure that it too
starts the channels at the next location in the dialplan.
ASTERISK-24529
Change-Id: I52406669cf64208aef7252a65b63ade31fbf7a5a
This patch is the first cut at adding stream support to the bridging framework.
Changes were made to the framework that allows mapping of stream topologies to
a bridge's supported media types.
The first channel to enter a bridge initially defines the media types for a
bridge (i.e. a one to one mapping is created between the bridge and the first
channel). Subsequently added channels merge their media types into the bridge's
adding to it when necessary. This allows channels with different sized
topologies to map correctly to each other according to media type. The bridge
drops any frame that does not have a matching index into a given write stream.
For now though, bridge_simple will align its two channels according to size or
first to join. Once both channels join the bridge the one with the most streams
will indicate to the other channel to update its streams to be the same as that
of the other. If both channels have the same number of streams then the first
channel to join is chosen as the stream base.
A topology change source was also added to a channel when a stream toplogy
change request is made. This allows subsystems to know whether or not they
initiated a change request. Thus avoiding potential recursive situations.
ASTERISK-26966 #close
Change-Id: I1eb5987921dd80c3cdcf52accc136393ca2d4163
The telephone_event option was used as a flag and a bit mapped value in
different places when it is a boolean. It is also inadequate to configure
the DTMF operation of the RTP instance created for the stream.
Change-Id: Ib1addeaf0ce86f07039f2f979cab29405dc5239b
RFC 5576 defines how SSRC-level attributes may be added to SDP media
descriptions. In general, this is useful for grouping related SSRCes,
indicating SSRC-level format attributes, and resolving collisions in RTP
SSRC values. These attributes are used widely by browsers during WebRTC
communications, including attributes defined by documents outside of RFC
5576.
This commit introduces the addition of SSRC-level attributes into SDPs
generated by Asterisk. Since Asterisk does not tend to use multiple
SSRCs on a media stream, the initial support is minimal. Asterisk
includes an SSRC-level CNAME attribute if configured to do so. This at
least gives browsers (and possibly others) the ability to resolve SSRC
collisions at offer-answer time.
In order to facilitate this, the RTP engine API has been enhanced to be
able to retrieve the SSRC and CNAME on a given RTP instance.
res_rtp_asterisk currently does not provide meaningful CNAME values in
its RTCP SDES items, and therefore it currently will always return an
empty string as the CNAME value. A task in the near future will result
in res_rtp_asterisk generating more meaningful CNAMEs.
Change-Id: I29e7f23e7db77524f82a3b6e8531b1195ff57789
This change extends the ast_request functionality by adding another
function and callback to create an outgoing channel with a requested
stream topology. Fallback is provided by either converting the
requested stream topology into a format capabilities structure if
the channel driver does not support streams or by converting the
requested format capabilities into a stream topology if the channel
driver does support streams.
The Dial application has also been updated to request an outgoing
channel with the stream topology of the calling channel.
ASTERISK-26959
Change-Id: Ifa9037a672ac21d42dd7125aa09816dc879a70e6
Interpolated frames are frames which contain a number of
samples but have no actual data. Audiohooks did not
handle this case when translating an incoming frame into
signed linear. It assumed that a frame would always contain
media when it may not. If this occurs audiohooks will now
immediately return and not act on the frame.
As well for users of ast_trans_frameout the function has
been changed to be a bit more sane and ensure that the data
pointer on a frame is set to NULL if no data is actually
on the frame. This allows the various spots in Asterisk that
check for an interpolated frame based on the presence of a
data pointer to work as expected.
ASTERISK-26926
Change-Id: I7fa22f631fa28d540722ed789ce28e84c7f8662b
This change adds a T.38 format which can be used in a stream
topology to specify that a UDPTL stream needs to be created.
The SDP API has been changed to understand T.38 and create
the UDPTL session, add the attributes, and parse the attributes.
This change does not change the boundary of the T.38 state
machine. It is still up to the channel driver to implement and
act on it (such as queueing control frames or reacting to them).
ASTERISK-26949
Change-Id: If28956762ccb8ead562ac6c03d162d3d6014f2c7
The gist of this work ensures that when a remote SDP is received, it is
merged properly with the local capabilities. The remote SDP is converted
into a stream topology. That topology is then merged with the current
local topology on the SDP state. That new merged topology is then used
to create an SDP. Finally, adjustments are made to RTP instances based
on knowledge gained from the remote SDP.
There are also a battery of tests in this commit that ensure that some
basic SDP merges work as expected.
While this may not sound like a big change, it has the property that it
caused lots of ancillary changes.
* The remote SDP is no longer stored on the SDP state. Biggest reason:
there's no need for it. The remote SDP is used at the time it is being
set and nowhere else.
* Some new SDP APIs were added in order to find attributes and convert
generic SDP attributes into rtpmap structures.
* Writing tests made me realize that retrieving a value from an SDP
options structure, the SDP options needs to be made const.
* The SDP state machine was essentially gutted by a previous commit.
Initially, I attempted to reinstate it, but I found that as it had
been defined, it was not all that useful. What was more useful was
knowing the role we play in SDP negotiation, so the SDP state machine
has been transformed into an indicator of role.
* Rather than storing separate local and joint stream state
capabilities, it makes more sense to keep track of current stream
state and update it as things change.
Change-Id: I5938c2be3c6f0a003aa88a39a59e0880f8b2df3d
The primary win of switching to eventfd when possible is that it only
uses a single file descriptor while pipe() will use two. This means for
each bridge channel we're reducing the number of required file
descriptors by 1, and - if you're using timerfd - we also now have 1
less file descriptor per Asterisk channel.
The API is not ideal (passing int arrays), but this is the cleanest
approach I could come up with to maintain API/ABI.
I've also removed what I believe to be an erroneous code block that
checked the non-blocking flag on the pipe ends for each read. If the
file descriptor is 'losing' its non-blocking mode, it is because of a
bug somewhere else in our code.
In my testing I haven't seen any measurable difference in performance.
Change-Id: Iff0fb1573e7f7a187d5211ddc60aa8f3da3edb1d
Both ast_pbx_outgoing_app() and ast_pbx_outgoing_exten() cause the core
to spawn a new thread to perform the dial. When AST_OUTGOING_WAIT_COMPLETE
is passed to these functions, the calling thread will be blocked until
the newly created channel has been hung up.
After this patch, we run the dial on the current thread rather than
spawning a new one. The only in-tree code that passes
AST_OUTGOING_WAIT_COMPLETE is pbx_spool, so you should see reduced
thread usage if you are using .call files.
Change-Id: I512735d243f0a9da2bcc128f7a96dece71f2d913
The struct ast_rtp_instance has historically been indirectly protected
from reentrancy issues by the channel lock because early channel drivers
held the lock for really long times. Holding the channel lock for such a
long time has caused many deadlock problems in the past. Along comes
chan_pjsip/res_pjsip which doesn't necessarily hold the channel lock
because sometimes there may not be an associated channel created yet or
the channel pointer isn't available.
In the case of ASTERISK-26835 a pjsip serializer thread was processing a
message's SDP body while another thread was reading a RTP packet from the
socket. Both threads wound up changing the rtp->rtcp->local_addr_str
string and interfering with each other. The classic reentrancy problem
resulted in a crash.
In the case of ASTERISK-26853 a pjsip serializer thread was processing a
message's SDP body while another thread was reading a RTP packet from the
socket. Both threads wound up processing ICE candidates in PJPROJECT and
interfering with each other. The classic reentrancy problem resulted in a
crash.
* rtp_engine.c: Make the ast_rtp_instance_xxx() calls lock the RTP
instance struct.
* rtp_engine.c: Make ICE and DTLS wrapper functions to lock the RTP
instance struct for the API call.
* res_rtp_asterisk.c: Lock the RTP instance to prevent a reentrancy
problem with rtp->rtcp->local_addr_str in the scheduler thread running
ast_rtcp_write().
* res_rtp_asterisk.c: Avoid deadlock when local RTP bridging in
bridge_p2p_rtp_write() because there are two RTP instance structs
involved.
* res_rtp_asterisk.c: Avoid deadlock when trying to stop scheduler
callbacks. We cannot hold the instance lock when trying to stop a
scheduler callback.
* res_rtp_asterisk.c: Remove the lock in struct dtls_details and use the
struct ast_rtp_instance ao2 object lock instead. The lock was used to
synchronize two threads to prevent a race condition between starting and
stopping a timeout timer. The race condition is no longer present between
dtls_perform_handshake() and __rtp_recvfrom() because the instance lock
prevents these functions from overlapping each other with regards to the
timeout timer.
* res_rtp_asterisk.c: Remove the lock in struct ast_rtp and use the struct
ast_rtp_instance ao2 object lock instead. The lock was used to
synchronize two threads using a condition signal to know when TURN
negotiations complete.
* res_rtp_asterisk.c: Avoid deadlock when trying to stop the TURN
ioqueue_worker_thread(). We cannot hold the instance lock when trying to
create or shut down the worker thread without a risk of deadlock.
This patch exposed a race condition between a PJSIP serializer thread
setting up an ICE session in ice_create() and another thread reading RTP
packets.
* res_rtp_asterisk.c:ice_create(): Set the new rtp->ice pointer after we
have re-locked the RTP instance to prevent the other thread from trying to
process ICE packets on an incomplete ICE session setup.
A similar race condition is between a PJSIP serializer thread resetting up
an ICE session in ice_create() and the timer_worker_thread() processing
the completion of the previous ICE session.
* res_rtp_asterisk.c:ast_rtp_on_ice_complete(): Protect against an
uninitialized/null remote_address after calling
update_address_with_ice_candidate().
* res_rtp_asterisk.c: Eliminate the chance of ice_reset_session()
destroying and setting the rtp->ice pointer to NULL while other threads
are using it by adding an ao2 wrapper around the PJPROJECT ice pointer.
Now when we have to unlock the RTP instance object to call a PJPROJECT ICE
function we will hold a ref to the wrapper. Also added some rtp->ice NULL
checks after we relock the RTP instance and have to do something with the
ICE structure.
ASTERISK-26835 #close
ASTERISK-26853 #close
Change-Id: I780b39ec935dcefcce880d50c1a7261744f1d1b4
This saves around 100 bytes when G.711, G.722, G.729, and GSM are advertised in
SDP. This reduces the chance to hit the MTU bearer of 1300 bytes for SIP over
UDP, if many codecs are allowed in Asterisk. This new feature is enabled
together with the optional feature compact_headers=yes via the file pjsip.conf.
ASTERISK-26932 #close
Change-Id: Iaa556ab4c8325cd34c334387ab2847fab07b1689
In all non-pbx modules, AST_MODULE_LOAD_FAILURE has been changed
to AST_MODULE_LOAD_DECLINE. This prevents asterisk from exiting
if a module can't be loaded. If the user wishes to retain the
FAILURE behavior for a specific module, they can use the "require"
or "preload-require" keyword in modules.conf.
A new API was added to logger: ast_is_logger_initialized(). This
allows asterisk.c/check_init() to print to the error log once the
logger subsystem is ready instead of just to stdout. If something
does fail before the logger is initialized, we now print to stderr
instead of stdout.
Change-Id: I5f4b50623d9b5a6cb7c5624a8c5c1274c13b2b25
If ast_stun_request() receives packets other than a STUN response then we
could conceivably never exit if we continue to receive packets with less
than three seconds between them.
* Fix poll timeout to keep track of the time when we sent the STUN
request. We will now send a STUN request every three seconds regardless
of how many other packets we receive while waiting for a response until we
have completed three STUN request transmission cycles.
Change-Id: Ib606cb08585e06eb50877f67b8d3bd385a85c266
Return early if ast_sorcery_retrieve_by_id() is not passed an id to find.
Also eliminated the RAII_VAR() usage in the function.
Change-Id: I871dbe162a301b5ced8b4393cec27180c7c6b218
Temporarily running out of file descriptors should not terminate the
listener thread. Otherwise, when there becomes more file descriptors
available, nothing is listening.
* Added EMFILE exception to abnormal thread exit.
* Added an abnormal TCP/TLS listener exit error message.
* Closed the TCP/TLS listener socket on abnormal exit so Asterisk does not
appear dead if something tries to connect to the socket.
ASTERISK-26903 #close
Change-Id: I10f2f784065136277f271159f0925927194581b5
ast_cdr_setuserfield wrote to a fixed length field using strcpy. This could
result in a buffer overrun when called from chan_sip or func_cdr. This patch
adds a maximum bytes written to the field by using ast_copy_string instead.
ASTERISK-26897 #close
patches:
0001-CDR-Protect-from-data-overflow-in-ast_cdr_setuserfie.patch submitted
by Corey Farrell (license #5909)
Change-Id: Ib23ca77e9b9e2803a450e1206af45df2d2fdf65c
If DESTDIR is set, don't call ldconfig. Assume that DESTDIR is used to
create a binary archive. The ldconfig call should be delegated to the
archive postinst script. This fixes the case where fakeroot wraps 'make
install' causing $EUID to be 0 even though it doesn't have permission to
call ldconfig.
The previous logic in configure.ac to detect and correct libdir
has been removed as it was not completely accurate. CentOS 64-bit
users should again specifiy --libdir=/usr/lib64 when configuring
to prevent install to /usr/lib.
Updated Makefile:check-old-libdir to check for orphans in
lib64 when installing to lib as well as orphans in lib when installing
to lib64.
Updated Makefile and main/Makefile uninstall targets to remove the
orphans using the new logic.
ASTERISK-26705
Change-Id: I51739d4a03e60bff38be719b8d2ead0007afdd51
This change cleans up state management for media streams by moving
RTP instances into their own session structure and adding additional
details that are not relevant to the core (such as connection address).
These can live either in the local capabilities or joint capabilities.
The ability to set explicit connection address information for
the purposes of direct media and NAT has also been added at the
global and stream specific level.
ASTERISK-26900
Change-Id: If7e5307239a9534420732de11c451a2705b6b681
The ao2_global_obj_release() function holds an exclusive lock on the
global object while it is being dereferenced. Any destructors that
run during this time that call ao2_global_obj_ref() will deadlock
because a read lock is required.
Instead, we make the global object inaccessible inside of the write
lock and only dereference it once we have released the lock. This
allows the affected destructors to fail gracefully.
While this doesn't completely solve the referenced issue (the error
message about not being able to create an IQ continues to be shown)
it does solve the backtrace spew that accompanied it.
ASTERISK-21009 #close
Reported by: Marcello Ceschia
Change-Id: Idf40ae136b5070dba22cb576ea8414fbc9939385
This change removes the old epoll support which has not been used or
maintained in quite some time.
The fixed number of file descriptors on a channel has also been removed.
File descriptors are now contained in a growable vector. This can be
used like before by specifying a specific position to store a file
descriptor at or using a new API call, ast_channel_fd_add, which adds
a file descriptor to the channel and returns its position.
Tests have been added which cover the growing behavior of the vector
and the new API call.
ASTERISK-26885
Change-Id: I1a754b506c009b83dfdeeb08c2d2815db30ef928
Dynamic payload types were statically defined in Asterisk. This unfortunately
limited the number of dynamic payloads that could be registered. With this patch
dynamic payload type numbers are now assigned dynamically and per RTP instance.
However, in order to limit any issues where some clients expect the old
statically defined value this patch makes it so the value Asterisk used to pre-
designate is used for the dynamic assignment if available.
An option, "rtp_use_dynamic", has also been added (can be set in asterisk.conf)
that turns the new dynamic behavior on or off. When off it reverts back to using
statically defined payload values. This option defaults to "yes" in Asterisk 15.
ASTERISK-26515 #close
patches:
ASTERISK-26515.diff submitted by jcolp (license 5000
Change-Id: I7653465c5ebeaf968f1a1cc8f3f4f5c4321da7fc
The CDR code previously did not allow the user field to be set
from the 'h' extension in the dialplan. This change removes that
limitation and allows it to be set.
ASTERISK-26818
Change-Id: I0fed8a79b5e408bac4e30542b8f33a61c5ed9aa6
We aren't validating that the URI we just parsed is a SIP/SIPS one before
trying to access the user, host, and port members of a possibly uninitialized
structure.
Also update the MessageSend documentation to indicate what 'from' formats are
accepted.
ASTERISK-26484 #close
Reported by: Vinod Dharashive
Change-Id: I476b5cc5f18a7713d0ee945374f2a1c164857d30
Fixed a bug in function "ast_audiohook_write_frame" that checked the
variable other_factory_samples and only flushed the factories, so they
would be in sync, when other_factory_samples > 0. When there is not any
rtp incoming the variable other_factory_samples will be 0, and although
the result of "our_factory_ms - other_factory_ms" may be very large,
this led to the record file not syncing.
ASTERISK-26875 #close
Reported-by: Aaron An
Tested-by: Aaron An
Change-Id: Ia4d890fb8fc1636a7188502bab35f555685aea22
POSIX does not require getprotobyname() to be thread safe and some
implementations use static memory which causes issues when multiple
threads are used.
Further, our usage of it today is just to ultimately get IPPROTO_TCP
for calls to setsockopt(). So instead we just use IPPROTO_TCP directly.
Change-Id: I2e14e58674808f7ce99b2f5e900d0f90d0d8da48
Dereferencing struct ast_autochan.chan without first calling
ast_autochan_channel_lock() is unsafe because the pointer could change at
any time due to a masquerade. Unfortunately, ast_autochan_channel_lock()
itself uses struct ast_autochan.chan unsafely and can result in a deadlock
if the original channel happens to get destroyed after a masquerade in
addition to the pointer getting changed.
The problem is more likely to happen with v11 and earlier because
masquerades are used to optimize out local channels on those versions.
However, it could still happen on newer versions if the channel is
executing a dialplan application when the channel is transferred or
redirected. In this situation a masquerade still must be used.
* Added a lock to struct ast_autochan to safely be able to use
ast_autochan.chan while trying to get the channel lock in
ast_autochan_channel_lock(). The locking order is the channel lock then
the autochan lock. Locking in the other direction requires deadlock
avoidance.
* Fix unsafe ast_autochan.chan usages in app_mixmonitor.c.
* Fix unsafe ast_autochan.chan usages in app_chanspy.c.
* app_chanspy.c: Removed unused autochan parameter from next_channel().
ASTERISK-26867
Change-Id: Id29dd22bc0f369b44e23ca423d2f3657187cc592
Forgetting to indicate an exten is a pattern can cause a crash if the
"pattern" has a character set range. e.g., "9999[3-5]" The crash is due
to a buffer overwrite because the '-' exten eye-candy wasn't removed as
expected and overran the allocated space.
The buffer overwrite is fixed two ways in this patch.
1) Fix ext_strncpy() to distinguish between pattern and non-pattern
extens. Now '-' characters are removed when they are eye-candy and not
when they are part of a pattern character set. Since the function is
private to pbx.c, the return value now returns the number of bytes written
to the destination buffer instead of the strlen() of the final buffer so
the callers that care don't need to add one.
2) Fix callers to ext_strncpy() to supply the correct available buffer
size of the destination buffer.
ASTERISK-26668
Change-Id: I555d97411140e47e0522684062d174fbe32aa84a
* Added additional fields to ast_sdp_options.
* Re-organized ast_sdp.
* Updated field names to correspond to RFC4566 terminology.
* Created allocs/frees for SDP children.
* Created getters/setters for SDP children where appropriate.
* Added ast_sdp_create_from_state.
* Refactored res_sdp_translator_pjmedia for changes.
Change-Id: Iefbd877af7f5a4d3c74deead1bff8802661b0d48
This patch demotes the ERROR message that is displayed when a
nonexistent item is removed from the Stasis cache. The genesis of this
demotion is due to chan_sip's realtime peers and their interaction with
Asterisk's core ast_endpoint code, but ostensibly it could happen from
other channel drivers as well.
Since Mark Michelson already did an excellent job of explaining on this
issue, it is quoted here for posterity:
"Internally, when a realtime peer is retrieved, Asterisk creates an
ast_endpoint structure. When that peer is destroyed, the ast_endpoint is
destroyed as well. Part of the destruction of the ast_endpoint involves
clearing the Stasis cache of all information about that endpoint. The
problem here is that the act of creating the ast_endpoint is not enough
to actually put any information in the Stasis cache. Instead, something
has to happen, such as a state change, in order for the Stasis cache to
have any information about that endpoint. When a device registers,
chan_sip creates an ast_endpoint structure, processes the REGISTER, and
then destroys the ast_endpoint. When the ast_endpoint is destroyed,
there is nothing to destroy in the Stasis cache, so an error message is
emitted. When you use rtcachefriends, ast_endpoint structures persist
for the lifetime of the module and so you do not see this error
message."
ASTERISK-25237 #close
Change-Id: I53cebc6b4a897a1ab9564182b75c177780feff70
This change adds a few things to facilitate stream topology changing:
1. Control frame types have been added for use by the channel driver
to notify the application that the channel wants to change the stream
topology or that a stream topology change has been accepted. They are
also used by the indicate interface to the channel that the application
uses to indicate it wants to do the same.
2. Legacy behavior has been adopted in ast_read() such that if a
channel requests a stream topology change it is denied automatically
and the current stream topology is preserved if the application is
not capable of handling streams.
Tests have also been written which confirm the multistream and
non-multistream behavior.
ASTERISK-26839
Change-Id: Ia68ef22bca8e8457265ca4f0f9de600cbcc10bc9
* manager.c:manager_state_cb() Fix potential use of uninitialized hint[]
if a hint does not exist for the requested extension. Ran into this when
developing a testsuite test. The AMI event ExtensionStatus came out with
the hint header value containing garbage. The AMI event PresenceStatus
also had the same issue.
* manager.c:action_extensionstate() no need to completely initialize the
hint[]. Only initialize the first element.
* pbx.c:ast_add_hint() Remove unnecessary assignment.
* chan_sip.c: Eliminate an unneeded hint[] local variable. We only care
about the return value of ast_get_hint() there.
Change-Id: Ia9a8786f01f93f1f917200f0a50bead0319af97b
* Removed the AST_CHAN_TP_MULTISTREAM tech property. We now rely
on read_stream being set to indicate a multi stream channel.
* Added ast_channel_is_multistream convenience function.
* Fixed issue where stream and default_stream weren't being set on
a frame retrieved from the queue.
* Now testing for NULL being returned from the driver's read or
read_stream callback.
* Fixed issue where the dropnondefault code was crashing on a
NULL f.
* Now enforcing that if either read_stream or write_stream are
set when ast_channel_tech_set is called that BOTH are set.
* Added the unit tests.
ASTERISK-26816
Change-Id: If7792b20d782e71e823dabd3124572cf0a4caab2
This introduces and documents the various states in the state machine.
This also introduces API functions that induce state changes, and places
TODO comments telling what needs to be done in addition to what is
already there. Those TODOs will be replaced with real code in upcoming
changes.
Change-Id: I871c0eb480b4c84d83e91ac5628e7a673e8b89ed
In the event that a cache file is removed out from under us, we should
treat the cache entry as stale and force a refresh.
ASTERISK-26774 #close
Reported by: Igor Gamayunov
Change-Id: I3b1bd0c999d59d18664ef73a29823bc5b431dc52
... and clean them both up on uninstall.
We've fixed the issue where 'make install' was installing to
/usr/lib on 64-bit systems that use /usr/lib64. Now we need
to clean up the remnants in /usr/lib.
* 'make install' now prints a warning if DESTDIR/ASTLIBDIR
contains 'lib64' and libasterisk* shared libraries or modules
are also found in DESTDIR/ASTLIBDIR with 'lib64' transformed
to 'lib'.
* 'make uninstall' ALWAYS cleans up both DESTDIR/ASTLIBDIR and
DESTDIR/ASTLIBDIR with 'lib64' transformed to 'lib'.
ASTERISK-26705
Change-Id: I6edddeb3c07a51e7c7ba7cac3c05e4bf3ec3f01f
This change introduces an ast_read_stream function and callback in
the channel technology which allows reading frames from all streams
and not just the default streams.
The stream number has also been added to frames. This is to allow the
case where frames are queued onto the channel instead of being read
directly from the driver.
This change does impose a restriction on reading though: a chain of
frames can only contain frames from the same stream.
ASTERISK-26816
Change-Id: I5d7dc35e86694df91fd025126f6cfe0453aa38ce
On some platforms a multiarch approach is used for libraries.
The build system does not take this into account and still
places libraries into the lib directory if no --libdir is
specified to configure. On initial startup this results in
libasteriskssl.so not being found, as it is not in the multiarch
lib directory. To make matters worse, options were being passed
to ldconfig on both Linux and FreeBSD that actually prevented
the rebuild of the cache.
* Fedora has a /usr/share/config.site that automatically tells
autoconf to use /usr/lib64 but CentOS does not. This logic was
copied to configure.ac and modified so systems like Ubuntu,
which still use /usr/lib for 64-bit systems, aren't affected.
Now that we have them in the correct directory...
In order for the system loader to find libasteriskssl and
libasteriskpj, one of 3 things has to happen...
- The linker cache must be rebuilt including the directory
where the libasterisk* libraries were installed. Only root
can rebuild the cache. This was busted.
- We have to link the asterisk binary with an rpath pointing
to the directrory where the libasterisk* libraries were
installed. This makes things very complicated and will happen
over the collective dead bodies of everyone who's had to
package a distribution with an rpath.
- Finally, you can start asterisk with LD_LIBRARY_PATH set to the
directrory where the libasterisk* libraries were installed.
There are no other options. So...
* The invokation of ldconfig has been moved from main/Makefile
to ASTTOPDIR/Makefile, the options have been removed, and
DESTDIR/ASTLIBDIR appended. If you aren't root, you will be
warned after the "Asterisk Installation Compete" banner that
you must re-run 'make install' as root, manually run
'ldconfig DESTDIR/ASTLIBDIR' as root, or run asterisk with
LD_LIBRARY_PATH.
ASTERISK-26705
Change-Id: I2a64b7c33a7d3e9bde20f47e3d3ab771977af982
This change adds an ast_write_stream function which allows
writing a frame to a specific media stream. It also moves
ast_write() to using this underneath by writing media
frames provided to it to the default streams of the channel.
Existing functionality (such as audiohooks, framehooks, etc)
are limited to being applied to the default stream only.
Unit tests have also been added which test the behavior of
both non-multistream and multistream channels to confirm that
the write() and write_stream() callbacks are invoked
appropriately.
ASTERISK-26793
Change-Id: I4df20d1b65bd4d787fce0b4b478e19d2dfea245c
Adds binaural synthesis to bridge_softmix (via convolution using libfftw3).
Binaural synthesis is conducted at 48kHz.
For a conference, only one spatial representation is rendered.
The default rendering is applied for mono-capable channels.
ASTERISK-26292
Change-Id: Iecdb381b6adc17c961049658678f6219adae1ddf
Jenkins2
Joshua Colp
Richard Mudgett
Alexander Traud
Corey Farrell
Ben Ford
Jean Aunis
George Joseph
Walter Doekes
Sean Bright
Kevin Harwell
Rusty Newton
Tzafrir Cohen
Mark Michelson
Frederic LE FOLL
Guido Falsi
Joshua Elson
zuul
Walter Doekes
Sebastian Gutierrez
Aaron An
Matt Jordan
Daniel Journo
frahaase