75 Commits (d953c9287a83c44e551c51a5b8804ffc6679d20e)

Author	SHA1	Message	Date
Richard Mudgett	7596231b0b	configure: Check cache for valid pjproject tarball before downloading. ... On a fresh Asterisk source directory, the bundled pjproject tarball is unconditionally downloaded even if the tarball is already in a specified cache directory. * Made check if the pjproject tarball is valid in the cache directory before downloading the tarball on a fresh source directory. Change-Id: Ic7ec842d3c97ecd8dafbad6f056b7fdbce41cae5	8 years ago
George Joseph	d91c93c226	configure: Add --with-download-cache option ... To make building without an internet connection easier, a new ./configure option '--with-download-cache' was added that sets the cache for externals (like pjproject, the codecs and the DPMA), AND the sounds files. It can also be specified as an environment variable named "AST_DOWNLOAD_CACHE". The existing '--with-sounds-cache' option / SOUNDS_CACHE_DIR env variable and '--with-externals-cache' option / EXTERNALS_CACHE_DIR env variable remain and if specified, will override '--with-downloads-cache'. Change-Id: I5c3cf15ee61e8fe191b52732303e969854f8d861	9 years ago
George Joseph	e92c1988ea	bundled_pjproject: Improve SSL/TLS error handling ... OpenSSL has 2 levels or error processing. It's possible for the top layer to return SSL_ERROR_SYSCALL but the lower layer return no error, in which case processing should continue. Only the top layer was being examined though so connections were being torn down when they didn't need to be. This patch adds the examination of the lower level codes, and if they return no errors, allows processing to continue. ASTERISK-27001 Reported-by: Ian Gilmour patches: pjproject-2.6.patch submitted by Ian Gilmour (license 6889) Updated-by: George Joseph and Sauw Ming (Teluu) Merged to upstream pjproject on 7/27/2017 (commit 5631) Change-Id: I23844ca0c68ef1ee550f14d46f6dae57d33b7bd2	9 years ago
Benjamin Keith Ford	203987ebeb	pjsip: Increase maximum packet size. ... The maximum packet size for PJSIP has been increased to handle the multiple streams being added for WebRTC. Change-Id: I9ea1e8d02668c544acadcb1c6200e1cc1bd588b3	9 years ago
Jenkins2	3bef1a0df9	Merge "pjproject_bundled: Allow passing configure options to bundled" into 14	9 years ago
George Joseph	f8a95ef5b6	pjproject_bundled: Allow passing configure options to bundled ... There wasn't any good way to pass options like --host or --build down to the pjproject configure which makes cross-compiling difficult. * Added a new PJPROJECT_CONFIGURE_OPTS environment variable which can be used to pass arbitrary options to pjproject configure. * Automatically set the pjproject configure --host and --build options to match those supplied for the asterisk configure. ASTERISK-27097 #close Reported-by: Kinsey Moore Change-Id: I5fa776e110262851173002a26ffe1172e4c35b2e	9 years ago
George Joseph	be0feb2ce8	chan_pjsip: Fix ability to send UPDATE on COLP ... When connected_line_method is "invite", we're supposed to determine if the client can support UPDATE and if it can, send UPDATE instead of INVITE to avoid the SDP renegotiation. Not only was pjproject not setting the PJSIP_INV_SUPPORT_UPDATE flag, we were testing that invite_tsx wasn't NULL which isn't always the case. * Updated chan_pjsip/update_connected_line_information to drop the requirement that invite_tsx isn't NULL. * Submitted patch to pjproject sip_inv.c that sets the PJSIP_INV_SUPPORT_UPDATE flag correctly. * Updated pjsip.conf.sample to clarify what happens when "invite" is specified. ASTERISK-27095 Change-Id: Ic2381b3567b8052c616d96fbe79564c530e81560	9 years ago
George Joseph	38e0d2304b	pjproject_bundled: Use the asterisk github mirror for download ... We now mirror the pjproject tarball and md5 at https://github.com/asterisk/third-party/tree/master/pjproject To improve download reliability, we now get the tarball from our mirror instead of from pjsip.org. ASTERISK-27052 #close Reported-by: 'alex' Change-Id: I60236587a8935bfa71fcc391f4e2ecb31918c08a	9 years ago
Jenkins2	17b23c4447	Merge "AST-2017-003: Handle zero-length body parts correctly." into 14	9 years ago
Mark Michelson	04c7bd61ce	AST-2017-003: Handle zero-length body parts correctly. ... ASTERISK-26939 #close Change-Id: I7ea235ab39833a187db4e078f0788bd0af0a24fd	9 years ago
Mark Michelson	83f6a6a2d6	AST-2017-002: Ensure transaction key buffer is large enough. ... ASTERISK-26938 #close Change-Id: I266490792fd8896a23be7cb92f316b7e69356413	9 years ago
George Joseph	6b15c7fc05	pjproject_bundled: Add --disable-libwebrtc to configure ... Without the disable, pjproject tries to build it's internal webrtc implementation which requires sse2. This fails on platforms without sse2. ASTERISK-26930 #close Reported-by: abelbeck Change-Id: I07231f9160c35cfa42b194d3aad4e7d51fd9a410	9 years ago
Alexander Traud	884bc5f76d	pjproject_bundled: Crash on pj_ssl_get_info() while ioqueue_on_read_complete(). ... When the Asterisk channel driver res_pjsip offers SIP-over-TLS, sometimes, not reproducible, Asterisk crashed in pj_ssl_sock_get_info() because a NULL pointer was read. This change avoids this crash. ASTERISK-26927 #close Change-Id: I24a6011b44d1426d159742ff4421cf806a52938b	9 years ago
George Joseph	e8cace12ba	pjproject_bundled: Add 3 upstream patches ... 0035-r5572-svn-backport-dialog-transaction-deadlock.patch 0036-r5573-svn-backport-ua-pjsua-transaction-deadlock.patch 0037-r5576-svn-backport-session-timer-crash.patch Also removed the progress bar from wget download to stdout. ASTERISK-26905 #close Reported-by: Ross Beer Change-Id: I268fb3cf71a3bb24283ff0d24bd8b03239d81256	9 years ago
Sean Bright	b033b74118	core: Remove embedded module support ... This has not worked for some time and is no longer actively maintained. Change-Id: I5110b0db69c152761b58fa025cb0a53b0e544d99	9 years ago
Kevin Harwell	8df2f481b6	pjproject_bundled: raise timeout value used when downloading ... After configuring Asterisk with '--with-pjproject-bundled' the configure/build process attempts to download pjproject from its download site. Currently, a timeout of 10 seconds is used that will stop the download process if pjproject has not been fully downloaded in that time. For some systems this was not enough time and the process was timing out too early. This patch raises the download timeout value to '60'. Also, this patch fixes another bug where the DOWNLOAD_TIMEOUT variable was not being properly exported due to a naming error. DOWNLOAD_MAX_TIMEOUT is now properly renamed to DOWNLOAD_TIMEOUT. ASTERISK-26814 #close Change-Id: Ia56e4e8a3d39db76bc8a1852b2cf07ec10b39842	9 years ago
Joshua Elson	cd80729193	pjsip: prevent memory corruption on creation of xml bodies ... ASTERISK-26776 #close Change-Id: I884b6f4e8233a355d0be687ec78d41bc0e4d3fd2	9 years ago
Joshua Colp	2416cf62d5	Merge "res_pjsip_transport_websocket: Add support for IPv6." into 14	9 years ago
George Joseph	9c3f0073cc	pjproject_bundled: Reduce the need for rebuilds ... Bundled pjproject should now only rebuild if one of the menuselect "Compiler Flags" options changes. Change-Id: If114a2e16b9e77af371a600d6a5e197bbf28fe43	9 years ago
Joshua Colp	833aa5e7a4	res_pjsip_transport_websocket: Add support for IPv6. ... This change adds a PJSIP patch (which has been contributed upstream) to allow the registration of IPv6 transport types. Using this the res_pjsip_transport_websocket module now registers an IPv6 Websocket transport and uses it for the corresponding traffic. ASTERISK-26685 Change-Id: Id1f9126f995b31dc38db8fdb58afd289b4ad1647	9 years ago
George Joseph	05c2e60017	pjproject_bundled: Update for pjproject 2.6 ... * Removed all 2.5.5 functional patches. * Updated usages of pj_release_pool to be "safe". * Updated configure options to disable webrtc. * Updated config_site.h to disable webrtc in pjmedia. * Added Richard Mudgett's recent resolver patches. Change-Id: Ib400cc4dfca68b3d07ce14d314e829bfddc252c7	9 years ago
Richard Mudgett	76f33b5ce7	pjproject: Fixes to resolve DNS SRV crashes. ... * Re #1945 (misc): Don't trigger SRV complete callback when there is a parse error. * srv_resolver.c: Don't try to send query if already considered resolved. ** In resolve_hostnames() don't try to resolve a query that is already considered resolved. ** In resolve_hostnames() fix DNS typo in comments. ** In build_server_entries() move a common expression assigning to cnt earlier. * sip_transport.c: Fix tdata object name to actually contain the pointer. It helps if the logs referencing a tdata object buffer actually have a name that includes the correct pointer as part of the name. Also since the tdata has its own pool it helps if any logs referencing the pool have the same name as the tdata object. This change brings tdata logging in line with how tsx objects are named. ASTERISK-26669 #close ASTERISK-26738 #close Change-Id: I56af2ded25476b3e870ca586ee69ed6954ef75af	9 years ago
Richard Mudgett	ce84d80428	pjproject: Increase SENDER_WIDTH column size for 64-bit system logs. ... ASTERISK-26669 ASTERISK-26738 Change-Id: Ibae6fc8cae69a1f04df0c577c4c11200499d6fe0	9 years ago
George Joseph	507c50914a	res_pjsip_pubsub: Correctly implement persisted subscriptions ... This patch fixes 2 original issues and more that those 2 exposed. * When we send a NOTIFY, and the client either doesn't respond or responds with a non OK, pjproject only calls our pubsub_on_evsub_state callback, no others. Since pubsub_on_evsub_state (which does the sub_tree cleanup) does not expect to be called back without the other callbacks being called first, it just returns leaving the sub_tree orphaned. Now pubsub_on_evsub_state checks the event for PJSIP_EVENT_TSX_STATE which is what pjproject will set to tell us that it was the transaction that timed out or failed and not the subscription itself timing our or being terminated by the client. If is TSX_STATE, pubsub_on_evsub_state now does the proper cleanup regardless of the state of the subscription. * When a client renews a subscription, we don't update the persisted subscription with the new expires timestamp. This causes subscription_persistence_recreate to prune the subscription if/when asterisk restarts. Now, pubsub_on_rx_refresh calls subscription_persistence_update to apply the new expires timestamp. This exposed other issues however... * When creating a dialog from rdata (which sub_persistence_recreate does from the packet buffer) there must NOT be a tag on the To header (which there will be when a client refreshes a subscription). If there is one, pjsip_dlg_create_uas will fail. To address this, subscription_persistence_update now accepts a flag that indicates that the original packet buffer must not be updated. New subscribes don't set the flag and renews do. This makes sure that when the rdata is recreated on asterisk startup, it's done from the original subscribe packet which won't have the tag on To. * When creating a dialog from rdata, we were setting the dialog's remote (SUBSCRIBE) cseq to be the same as the local (NOTIFY) cseq. When the client tried to resubscribe after a restart with the correct cseq, we'd reject the request with an Invalid CSeq error. * The acts of creating a dialog and evsub by themselves when recreating a subscription does NOT restart pjproject's subscription timer. The result was that even if we did correctly recreate the subscription, we never removed it if the client happened to go away or send a non-OK response to a NOTIFY. However, there is no pjproject function exposed to just set the timer on an evsub that wasn't created by an incoming subscribe request. To address this, we create our own timer using ast_sip_schedule_task. This timer is used only for re-establishing subscriptions after a restart. An earlier approach was to add support for setting pjproject's timer (via a pjproject patch) and while that patch is still included here, we don't use that call at the moment. While addressing these issues, additional debugging was added and some existing messages made more useful. A few formatting changes were also made to 'pjsip show scheduled tasks' to make displaying the subscription timers a little more friendly. ASTERISK-26696 ASTERISK-26756 Change-Id: I8c605fc1e3923f466a74db087d5ab6f90abce68e	9 years ago
George Joseph	da5e8b177c	pjproject_bundled: Fix setting max log level ... An earlier attempt to prevent pjsua from spitting out an extra 6795 lines of debug output every time the testsuite called it was also turning off the ability for asterisk to output debug info when it needed to. This patch reverts the earlier fix and instead adds a pjproject patch that sets the startup log level to 1 for pjsua pjsystest and the pjsua python binding. This is an asterisk-only patch that does not affect pjproject functionality and will not be submitted upstream. Change-Id: I347a8b58b2626f2906ccfc1d339e907627a0c9e8	9 years ago
George Joseph	846432013a	pjproject_bundled: Fix compilation with MALLOC_DEBUG ... When MALLOC_DEBUG was specified, make was failing. Immediately remaking would work. The issues was in the ordering of the make dependencies. Change-Id: If6030b54fc693f3179f32bfd20c6b5d5f1b3f7cd	9 years ago
George Joseph	cac644cf14	pjproject_bundled: Compile pjsua with max log level = 2 ... A while back, we changed config_site.h to set PJ_LOG_MAX_LEVEL = 6. This allowed us to control the log level better from inside Asterisk. An unfortunate side effect of this was that the pjsua binary and python bindings were also compiled with log level set to 6 so whenever a testsuite test that uses pjsua runs, it spits out 6795 lines of debug in an instant even before the test starts. I believe this overruns the Jenkins capture buffer and prevents the test from properly terminating. In turn, this results in the testsuite just hanging until the job is killed. It's more frequent on the higher end agents because they can spit out the messages faster. Unfortunately, the messages are all spit out before we have control of the python pj.Lib instance where we can set logging levels so the only alternative was to actually compile pjsua and _pjsua.so with an overridden PJ_LOG_MAX_LEVEL. Although defining a lower max level was done in the Makefile, the define in config_site.h had to be wrapped with "#ifndef" so the change would take effect. Change-Id: I2af9e7d48dde1927279c586c9c725d868fe6f3ff	9 years ago
George Joseph	c89ce1181c	pjproject_bundled: Make build single threaded ... There were just too many issues in various environments with multi threaded building of pjproject. It doesn't really speed things up anyway since asterisk is already being compiled in parallel. Change-Id: Ie5648fb91bb89b4224b6bf43a0daa1af793c4ce1	9 years ago
George Joseph	f4551951ba	pjproject_bundled: Retry download if previously saved tarball is bad ... If a tarball is corrupted during download, the makefile will attempt to download it again. If the tarball somehow gets corrupted after it's downloaded however, the makefile was just failing. We now retry the download. ASTERISK-26653 #close Change-Id: I1b24d454852d80186f60c5a65dc4624ea8a1c359	9 years ago
Joshua Colp	2303ae94b4	Merge "Bundled pjproject: Fix finding SIP transactions." into 14	9 years ago
Richard Mudgett	36dbad82c9	Bundled pjproject: Fix finding SIP transactions. ... Occasionally SIP message transactions are not found when they should be. In the particular case an incoming INVITE transaction is CANCELed but the INVITE transaction cannot be found so a 481 response is returned for the CANCEL. The problematic calls have a '_' character in the Via branch parameter. The problem is in the pjproject PJ_HASH_USE_OWN_TOLOWER feature's code. The problem with the "own tolower" code is that it does not calculate the same hash value as when the pj_tolower() function is used. The "own tolower" code will erroneously modify the ASCII characters '@', '[', '\\', ']', '^', and '_'. Calls to pj_hash_calc_tolower() can use the PJ_HASH_USE_OWN_TOLOWER substitute algorithm when enabled. Calls to pj_hash_get_lower(), pj_hash_set_lower(), and pj_hash_set_np_lower() call find_entry() which never uses the PJ_HASH_USE_OWN_TOLOWER algorithm. As a result you may not be able to find a hash tabled entry because the calculated hash values would differ. * Simply disable PJ_HASH_USE_OWN_TOLOWER. ASTERISK-26490 #close Change-Id: If89bfdb5f301b8b685881a9a2a6e0c3c5af32253	9 years ago
George Joseph	90c0faa340	pjproject_bundled: Fix missing inclusion of symbols ... Added back in a -g3, and an -O3 when DONT_OPTIMIZE is not set, to the CFLAGS. Not sure how they went missing. Also fixed an uninstall problem where we weren't removing the symlink from libasteriskpj.so.2 to libasteriskpj.so. While I was there, I fixed it for libasteriskssl as well. Change-Id: I9e00873b1e9082d05b5549d974534b48a2142556	9 years ago
Richard Mudgett	846c77b28c	PJPROJECT logging: Made easier to get available logging levels. ... Use of the new logging is as simple as issuing the new CLI command or setting the new pjproject.conf option. Other options that can affect the logging are how you have the pjproject log levels mapped to Asterisk log types in pjproject.conf and if you have configured Asterisk to log the DEBUG type messages. Altering the pjproject.conf level mapping shouldn't be necessary for most installations as the default mapping is sensible. Configuring Asterisk to log the DEBUG message type is standard practice for collecting debug information. * Added CLI "pjproject set log level" command to dynamically adjust the maximum pjproject log message level. * Added CLI "pjproject show log level" command to see the currently set maximum pjproject log message level. * Added pjproject.conf startup section "log_level" option to set the initial maximum pjproject log message level so all messages could be captured from initialization. * Set PJ_LOG_MAX_LEVEL to 6 to compile in all defined logging levels into bundled pjproject. Pjproject will use the currently set run time log level to determine if a log message is generated just like Asterisk verbose and debug logging levels. * In log_forwarder(), made always log enabled and mapped pjproject log messages. DEBUG mapped log messages are no longer gated by the current Asterisk debug logging level. * Removed RAII_VAR() from res_pjproject.c:get_log_level(). ASTERISK-26630 #close Change-Id: I6dca12979f482ffb0450aaf58db0fe0f6d2e5389	9 years ago
zuul	7ec27528b2	Merge "pjproject_bundled: Improve reliability of pjproject download" into 14	9 years ago
Joshua Colp	3a151b5205	Merge "build: Various OpenBSD issues" into 14	9 years ago
George Joseph	6d34d0ab36	pjproject_bundled: Improve reliability of pjproject download ... The download process now has a timeout which will cause wget to retry if it stops retrieving data for 5 seconds and fetch and curl to timeout if the whole retrieval take smore than 30 seconds. If the tarball retrieval works, the MD5SUM file is retrieved from the downloads site and the md5 checksum is verified. If either the tarball retrieval or MD5SUM retrieval fails, or the checksums don't match, the entire process is retried once. If it fails again, any incomplete tarball is deleted. .DELETE_ON_ERROR: was also added to the Makefile. Not only does this delete the tarball on failure, it till also delete corrupted library files from the pjproject source directory should they fail to build correctly. Tested all the way back to FreeBSD 9, CentOS 6, Debian 6 and Ubuntu 14. Change-Id: Iea7d33b96a31622ab1b6e54baebaf271959514e1	9 years ago
zuul	38d023c628	Merge "res_pjsip_outbound_authenticator_digest.c: Fix memory pool leak." into 14	9 years ago
George Joseph	54d7e65014	build: Various OpenBSD issues ... OpenBSD's 'find' doesn't take the -delete argument so you have to pipe through 'xargs rm -rf'. 'echo -e' doesn't like \t starting a line. It just prints 't' which causes the libasteriskpj.exports file to be garbage. They were just cosmetic so they were removed. librt doesn't exist so the link of libasteriskpj.so fails. It's not actually needed for linux anyway so -lrt was removed from the link. res_rtp_asterisk was failing to load because of an undefined DTLS_method. '|| defined(LIBRESSL_VERSION_NUMBER)' was added to the #if so DTLSv1_method is used instead. ASTERISK-26608 Change-Id: I926ec95b0b69633231e3ad1d6e803b977272c49c	9 years ago
Richard Mudgett	fb05acbb32	res_pjsip_outbound_authenticator_digest.c: Fix memory pool leak. ... Responding to authentication challenges leaks PJSIP memory pools. The leak was introduced with a pjproject 2.5.5 API change. https://trac.pjsip.org/repos/ticket/1929 changed the API usage of pjsip_auth_clt_init() to require the new API pjsip_auth_clt_deinit() to clean up cached authentication allocations that get allocated with pjsip_auth_clt_reinit_req(). ASTERISK-26516 #close Change-Id: I4473141b8c3961d0dc91c382beb3876b3efb45c8	9 years ago
Matt Jordan	fb9b867d7d	pjproject: Use a much higher limit for PJ_ICE_MAX_CHECKS ... The PJ_ICE_MAX_CHECKS constant is used by pjproject to determine how many pairs of local/remote candidates will be made. If for some reason we reach this upper bound, ICE will generally fail and no media will flow between the browser and Asterisk. This patch makes PJ_ICE_MAX_CHECKS set to the total possible number of pairs of candidates we'd theoretically allow, which is PJ_ICE_MAX_CAND^2. Prior to this patch, we simply multiplied PJ_ICE_MAX_CAND by two; on systems with multiple interfaces (I blame Docker), this is far too low to allow WebRTC calls to succeed. Setting this to be PJ_ICE_MAX_CAND^2 allowed WebRTC calls to succeed even when the system Asterisk was running on had quite a few virtual interfaces. Change-Id: Icd4f17de0ac9d3a83dddfc8bf1cb7616bc107d55	9 years ago
George Joseph	aa04c453b8	pjproject_bundled: Fix issue with libasteriskpj needing libresample ... libresample is only needed by pjproject if we're building pjsua, which we only do if TEST_FRAMEWORK is selected. It's required by pjsua to process audio which is needed by some testsuite tests. Unfortunately, pjproject relies on a newer version of libresample than the version that ships by most distros so we need to compile the version that's bundled with pjproject. Since we only need it for pjsua, we DON'T want it's symbols exposed when we actually build asterisk. There was a problem however... TEST_FRAMEWORK is only known AFTER we've already run ./configure on both asterisk and pjproject but pjproject's ./configure needs to test it to know whether to set up to build libresample or not. The previous way of figuring this out was to always tell ./configure "yes" but not actually build the library. This caused an issue where building libasteriskpj was being told to include libresample but it wasn't actually there. The solution is to still do a default pjproject configure during an asterisk ./configure but if makeopts or menuselect.makeopts changes subsequently, we now reconfigure pjproject, taking into account the current state of TEST_FRAMEWORK. Previously, if makeopts or menuselect.makeopts changed, only a recompile of pjproject was done. Change-Id: I9b5d84c61384a3ae07fe30e85c49698378cc4685	9 years ago
Joshua Colp	abfb7b5d4a	Merge "res_pjsip_sdp_rtp: Limit number of formats to defined maximum." into 14	9 years ago
zuul	5417fc9f65	Merge "bundled pjproject: Fix DNS write to freed memory." into 14	9 years ago
Richard Mudgett	4fda9e7b0b	bundled pjproject: Fix DNS write to freed memory. ... PJPROJECT 2.5.5 introduced a race condition with the -r5349 IPv6 DNS patch. The patch below fixes a write to freed memory under cartain DNS lookup conditions. 0006-r5477-svn-backport-Fix-DNS-write-on-freed-memory.patch ASTERISK-26516 Reported by: Richard Mudgett Change-Id: Ifdfae9ecf1e41b53080f33aab44ce1a220f349c5	9 years ago
Joshua Colp	69196a8db4	res_pjsip_sdp_rtp: Limit number of formats to defined maximum. ... The res_pjsip_sdp_rtp module did not restrict the number of formats added to a media stream in the SDP to the defined limit. If allow=all was used with additional loaded codecs this could result in the next media stream being overwritten some. This change restricts the module to limit it to the defined maximum and also increases the maximum in our bundled pjproject. ASTERISK-26541 #close Change-Id: I0dc5f59d3891246cafa2f3df5ec406f088559ee8	9 years ago
George Joseph	23812d60b9	pjproject_bundled: Fix compile of pjsua so it handles audio ... In order for pjsua and its python binding to actually negotiate audio for the testsuite tests, it needs g711 and resample. The pj* libraries themselves do not. Unfortunately, pjproject relies on a brand new libresample that most distros don't ship so we need to use the libresample already bundled with pjproject. Only the pjsua executable and the _pjsua.so python library are linked with it so it shouldn't interfere with asterisk itself. Also it was pointed out that apply_patches couldn't handle multiple patches that depended on each other during the dry-run, so the dry-run was removed. Change-Id: I24f397462b486dcdde0dcafe40e6c55a6593f098	9 years ago
Richard Mudgett	79ac79ab03	bundled pjproject: Crashes while resolving DNS names. ... PJPROJECT 2.5.5 introduced a race condition with the -r5349 IPv6 DNS patch. The patches below fix the DNS lookup race condition crash caused by attempting to send the same message twice for the single DNS lookup. 0006-r5471-svn-backport-Various-fixes-for-DNS-IPv6.patch 0006-r5473-svn-backport-Fix-pending-query.patch The patch below removes a cached DNS response from the hash table when another thread is referencing the old entry. The table still contained the entry when it was destroyed which can result in inexplicable crashes. 0006-r5475-svn-backport-Remove-DNS-cache-entry.patch ASTERISK-26344 #close Reported by: Ian Gilmour ASTERISK-26387 #close Reported by: Harley Peters Change-Id: I17fde80359e66f65a91341ceca58d914d0f61cc4	9 years ago
George Joseph	162bb27cfb	pjproject_bundled: Remove usage of tar's --strip-components option ... Older versions of tar don't support the --strip-components option so instead of doing 'tar --strip-components=1 -C source', we now just untar to the tarball's root directory (pjproject-<version>) and rename that directory to 'source'. Also fixed an issue where the pjproject source directory is a hard coded absolute pathname. ASTERISK-26510 #close ASTERISK-22480 #close Change-Id: I9ec92952507a91ff4e4d01e0149e09fd8e8f32b0	9 years ago
George Joseph	0836b617e5	pjproject_bundled: Fixed various build issues ... * CFLAGS is now properly set when using older gcc. * All third-party pjproject targets have been removed. This fixes an issue with older libsrtp in some distros. * Manually removing the source directory now causes a rebuild. * EXTERNALS_CACHE_DIR is now properly checked. * Whitespace fixes. Change-Id: I98fec6847efc5602a9f41cb95096fd660a49fa60	9 years ago
George Joseph	230dd6f9af	pjproject_bundled: Add patch to address SSL crash ... Addresses crashes when an attempt is made to operate on an SSL socket after the socket has been closed. ASTERISK-26477 #close Change-Id: I421305b357558b4f9e690210dc0f4831ef4b3002	9 years ago