Small fix. It is necessary to double-check
the index that we just removed because there
is a new element.
ASTERISK-26453 #close
Change-Id: Ib947fa94dc91dcd9341f357f1084782c64434eb7
Fixed a memory leak. It removes only the first element.
Added a useful feature in vector.h to remove all items
under the CMP through a callback function / macro.
ASTERISK-26453 #close
Change-Id: I84508353463456d2495678f125738e20052da950
Added tests for bzip2, tar, patch, sed and nm to configure.ac.
Set DOWNLOAD_TO_STDOUT to a working command line regardless of
whether the download program is wget, curl or fetch.
Added a 'configure.m4' file to the third-party directory which takes
care of calling any third-party project setup. Had to move some
pjproject_bundled stuff up in configure.ac so it was called before
the third-party configure macro.
The pjproject tarball is now downloaded to the externals_cache_dir if
it was specified on the ./configure command line
Removed regeneration of the pjproject aconfigure file. It was only
needed for an old patch that no longer applies.
Converted the tests for symbols to explicit tests since we know that
they're now available in the bundled version. Saves a little time
during configure.
ASTERISK-26416 #close
Reported-by: Corey Farrell
Change-Id: Id1d94251c0155f8dd41b7de7067f35cfbaafbb9b
* Compile __ast_assert_failed unconditionally.
* Use __ast_assert_failed to log messages from log_bad_ao2
* Remove calls to ast_assert(0) that happen after log_bad_ao2 was run.
Change-Id: I48f1af44b2718ad74a421ff75cb6397b924a9751
Add Ogg/Opus playback support.
This uses libopusfile in order to be able to read .opus files and play
them back.
Writing/recording support is not present at this time.
ASTERISK-26409
Change-Id: I8815d23345108d8ca7c0bd640f6a1ce6b4f56955
Users upgrading from asterisk 13.5 to a later version and who use
realtime with peers that have mailboxes were experiencing runaway
situations that manifested as a continuous stream of taskprocessor
congestion errors, memory leaks and an unresponsive chan_sip.
A related issue was that setting rtcachefriends=no NEVER worked in
asterisk 13 (since the move to stasis). In 13.5 and earlier, when a
peer tried to register, all of the stasis threads would block and
chan_sip would again become unresponsive. After 13.5, the runaway
would happen.
There were a number of causes...
* mwi_event_cb was (indirectly) calling build_peer even though calls to
mwi_event_cb are often caused by build_peer.
* In an effort to prevent chan_sip from being unloaded while messages
were still in flight, destroy_mailboxes was calling
stasis_unsubscribe_and_join but in some cases waited forever for the
final message.
* add_peer_mailboxes wasn't properly marking the existing mailboxes
on a peer as "keep" so build_peer would always delete them all.
* add_peer_mwi_subs was unsubscribing existing mailbox subscriptions
then just creating them again.
All of this was causing a flood of subscribes and unsubscribes on
multiple threads all for the same peer and mailbox.
Fixes...
* add_peer_mailboxes now marks mailboxes correctly and build_peer only
deletes the ones that really are no longer needed by the peer.
* add_peer_mwi_subs now only adds subscriptions marked as "new" instead
of unsubscribing and resubscribing everything. It also adds the peer
object's address to the mailbox instead of its name to the subscription
userdata so mwi_event_cb doesn't have to call build_peer.
With these changes, with rtcachefriends=yes (the most common setting),
there are no leaks, locks, loops or crashes at shutdown.
rtcachefriends=no still causes leaks but at least it doesn't lock, loop
or crash. Since making rtcachefriends=no work wasnt in scope for this
issue, further work will have to be deferred to a separate patch.
Side fixes...
* The ast_lock_track structure had a member named "thread" which gdb
doesn't like since it conflicts with it's "thread" command. That
member was renamed to "thread_id".
ASTERISK-25468 #close
Change-Id: I07519ef7f092629e1e844f855abd279d6475cdd0
sd_notify() is used to notify systemd of changes to the status of the
process. This allows the systemd daemon to know when the process
finished loading (and thus only start another program after Asterisk has
finished loading).
To use this, use a systemd unit with 'Type=notify' for Asterisk.
This commit also adds the function ast_sd_notify(), a wrapper around
sd_notify that does nothing if not built with systemd support.
Also adds support for libsystemd detection in the configure script.
Change-Id: Ied6a59dafd5ef331c5c7ae8f3ccd2dfc94be7811
(cherry picked from commit 07b95f7c65)
This implements the chan_sip legacy_useroption_parsing option but with a
better name.
* Made the caller-id number and redirecting number strings obtained from
incoming SIP URI user fields always truncated at the first semicolon.
People don't care about anything after the semicolon showing up on their
displays even though the RFC allows the semicolon.
ASTERISK-26316 #close
Reported by: Kevin Harwell
Change-Id: Ib42b0e940dd34d84c7b14bc2e90d1ba392624f62
On heavy loaded system the TCP/TLS incoming calls could be
disconnected by pjproject while these calls are being
processed by asterisk which could use the session's memory pools.
If the session in the disconnected state then the session memory
pools were already freed, so we get segfault.
This patch adds a lifetime control on an INVITE session to pjproject.
The lifetime of the session is manipulated by calling
pjsip_inv_add_ref/pjsip_inv_dec_ref.
This patch uses these functions to inform pjproject that the
session is in use.
This patch adds check if the session state is not disconnected
and also checks if the memory pool is not NULL.
This patch also places tasks 'session_end' and 'session_end_completion'
into session's serializer to avoid race condition.
ASTERISK-26291 #close
Change-Id: I4d28b1fb3b91f0492a911d110049d670fdc3c8d7
ast_channel_get_t38_state() calls ast_channel_queryoption() with
AST_OPTION_T38_STATE. If the passed in channel is a local channel then a
deadlock can happen if a channel lock is held when called.
* Made ast_channel_get_t38_state() callers not hold a channel lock before
calling.
* Update ast_channel_get_t38_state() doxygen to note that no channel locks
can be held when calling the function.
ASTERISK-26203 #close
Reported by: Etienne Lessard
ASTERISK-24822 #close
Reported by: David Brillert
ASTERISK-22732 #close
Reported by: Richard Mudgett
Change-Id: I49fd76fa9af628b4198009b5c0b82c8b03681214
ASTERISK-25980 added the FAXMODE channel variable to res_fax.c.
Unfortunately, it also introduced a deadlock potential because
set_channel_variables() which sets FAXMODE can be called during a
masquerade. The ast_channel_get_t38_state() which gets the value used to
set FAXMODE cannot be called with the channel locked. As a result, local
channels can deadlock because of how they must acquire the locks necessary
to operate.
The intent of FAXMODE is for dialplan to know how a fax was transferred
after the fax completes. However, the previous patch sets FAXMODE to the
channel's current T.38 state AFTER the fax has completed and where T.38
may have already disconnected.
* Set FAXMODE based upon T.38 negotiations exchanged either with the fax
applications or the fax framehooks.
ASTERISK-26203
Reported by: Etienne Lessard
ASTERISK-24822
Reported by: David Brillert
ASTERISK-22732
Reported by: Richard Mudgett
Change-Id: Id525747254b64c1efe8b1b5973d52ff9719c2ae1
MALLOC_DEBUG should not be used to check if debugging is actually
enabled, __AST_DEBUG_MALLOC should be used instead. MALLOC_DEBUG only
indicates that debugging is requested, __AST_DEBUG_MALLOC indicates it
is active.
Change-Id: I3ce9cdb6ec91b74ee1302941328462231be1ea53
contact_user, when specified on an endpoint, will override the user
portion of the Contact header on outgoing requests.
Change-Id: Icd4ebfda2f2e44d3ac749d0b4066630e988407d4
updated the uri handler to include the url prefix of the http server
this enables res_ari to add it to the uris when generating docs
Change-Id: I279335a2625261a8492206c37219698f42591c2e
The Exchanging Device and Mailbox States could not working
if the Entity ID (EID) is not set manually and can't be obtained
from ethernet interface.
This patch replaces debug message to warning
and addes missing description about option 'entityid' to
asterisk.conf.sample.
With this patch the asterisk also:
(1) decline loading the modules which won't work without EID:
res_corosync and res_pjsip_publish_asterisk.
(2) warn if EID is empty on loading next modules:
pbx_dundi, res_xmpp
Starting with v197 systemd/udev will automatically assign "predictable"
names for all local Ethernet interfaces.
This patch also addes some new ethernet prefixes "eno" and "ens".
ASTERISK-26164 #close
Change-Id: I72d712f1ad5b6f64571bb179c5cb12461e7c58c6
If both channels which should be masqueraded
are in the same serializer:
1st channel will be locked waiting condition 'complete'
2nd channel will be locked waiting condition 'suspended'
On heavy load system a chance that both channels will be in
the same serializer 'pjsip/distibutor' is very high.
To reproduce compile res_pjsip/pjsip_distributor.c with
DISTRIBUTOR_POOL_SIZE=1
Steps to reproduce:
1. Party A calls Party B (bridged call 'AB')
2. Party B places Party A on hold
3. Party B calls Voicemail app (non-bridged call 'BV')
4. Party B attended transfers Party A to voicemail using REFER.
5. When asterisk masquerades calls 'AB' and 'BV',
a deadlock is happened.
This patch adds a suspension indicator to the taskprocessor.
When a session suspends/unsuspends the serializer
it sets the indicator to the appropriate state.
The session checks the suspension indicator before
suspend the serializer.
ASTERISK-26145 #close
Change-Id: Iaaebee60013a58c942ba47b1b4930a63e686663b
The PJSIP taskprocessors could be overflowed on startup
if there are many (thousands) realtime endpoints
configured with unsolicited mwi.
The PJSIP stack could be totally unresponsive for a few minutes
after boot completed.
This patch creates a separate PJSIP serializers pool for mwi
and makes unsolicited mwi use serializers from this pool.
This patch also adds 2 new global options to tune taskprocessor
alert levels: 'mwi_tps_queue_high' and 'mwi_tps_queue_low'.
This patch also adds new global option 'mwi_disable_initial_unsolicited'
to disable sending unsolicited mwi to all endpoints on startup.
If disabled then unsolicited mwi will start processing
on next endpoint's contact update.
ASTERISK-26230 #close
Change-Id: I4c8ecb82c249eb887930980a800c9f87f28f861a
This ensures startup is canceled due to allocation failures from the
following initializations.
* channel.c: ast_channels_init
* config_options.c: aco_init
ASTERISK-26265 #close
Change-Id: I911ed08fa2a3be35de55903e0225957bcdbe9611
We can allow dangerous functions when adding a hint since altering
dialplan is itself a privileged activity. Otherwise, we could never
execute dangerous functions.
ASTERISK-25996 #close
Reported by: Andrew Nagy
Change-Id: I4929ff100ad1200a0198262d069a34f2296e77ba
This adds support for tagging functions with the noreturn attribute.
If DO_CRASH is enabled then ast_do_crash never returns. If AST_DEVMODE
and DO_CRASH are enabled then failed assertions never return. This can
resolve a large number of false positives with static analyzers.
ASTERISK-26220 #close
Change-Id: Icfb61e5fe54574eced4c3e88b317244f467ec753
The fax detection timeout option did not work because basically the wrong
variable was checked in fax_detect_framehook(). As a result, the timer
would timeout immediately and disable fax detection.
* Fixed ignoring negative timeout values. We'd complain and then go right
on using the negative value.
* Fixed destroy_faxdetect() in the off-nominal case of an incomplete
object creation.
* Added more range checking to FAXOPT(gateway) timeout parameter.
ASTERISK-26214 #close
Reported by: Richard Mudgett
Change-Id: Idc5e698dfe33572de9840bc68cd9fc043cbad976
The new endpoint option allows the PJSIP channel driver's fax_detect
endpoint option to timeout on a call after the specified number of
seconds into a call. The new feature is disabled if the timeout is set
to zero. The option is disabled by default.
ASTERISK-26214
Reported by: Richard Mudgett
Change-Id: Id5a87375fb2c4f9dc1d4b44c78ec8735ba65453d
This commit adds scaffolding in order to support the SILK audio format
on calls. Roughly, this is what is added:
* Cached silk formats. One for each possible sample rate.
* ast_codec structures for each possible sample rate.
* RTP payload mappings for "SILK".
In addition, this change overhauls the res_format_attr_silk file in the
following ways:
* The "samplerate" attribute is scrapped. That's native to the format.
* There are far more checks to ensure that attributes have been
allocated before attempting to reference them.
* We do not SDP fmtp lines for attributes set to 0.
These changes make way to be able to install a codec_silk module and
have it actually work. It also should allow for passthrough silk calls
in Asterisk.
Change-Id: Ieeb39c95a9fecc9246bcfd3c45a6c9b51c59380e
Since July 2014, TLS based protocols (SIP over TLS, Secure WebSockets, HTTPS)
support PFS thanks to ASTERISK-23905. In July 2015, the same feature was added
for DTLS. The source code from main/tcptls.c should have been re-used to ease
security audits. Therefore, this change rolls back the change from July 2015 and
re-uses the code from July 2014. This has the additional benefits to work under
CentOS 7 and enabling not just ECDHE but DHE based cipher suites as well.
ASTERISK-25659 #close
Reported by: StefanEng86, urbaniak, pay123
Tested by: sarumjanuch, traud
patches:
res_rtp_asterisk.patch submitted by sarumjanuch
dtls_centos_step_1.patch submitted by traud
dtls_centos_step_2.patch submitted by traud
Change-Id: I537cadf4421f092a613146b230f2c0ee1be28d5c
Updated the macro-set autoconf/ax_pthread.m4 to its latest upstream version.
ASTERISK-26046 #close
Change-Id: I11abc11d17acd2b6a8a5a5be8ae8e0949dab9cc7
The ASTERISK-25904 change-id I8fad8aae9305481469c38d2146e1ba3a56d3108f
patch introduced several regressions when the newly created "Updated"
state goes out for each endpoint registration refresh.
1) It restarted any OPTIONS RTT ping cycle.
2) It would interfere with a currently active ping and throw off that
ping's resulting RTT calculation.
3) It cleared the RTT time each time the endpoint was refreshed.
4) The cleared RTT time was sent out as a statsd update each time.
5) It created two AMI events for each update.
* Revert the original patch and reimplement it. Now the current contact
status state is re-sent instead of the state being momentarily toggled
every time the endpoint refreshes its registration. The statsd events are
not created for the re-sent refresh because they are sent after every
OPTIONS ping.
ASTERISK-26160 #close
Reported by: Matt Jordan
Change-Id: Ie072be790fbb2a8f5c1c874266e4143fa31f66d1
The func_odbc module was modified to ensure that the
previous behavior of using a single database connection
was maintained. This was done by getting a single database
connection and holding on to it. With the new multiple
connection support in res_odbc this will actually starve
every other thread from getting access to the database as
it also maintains the previous behavior of having only
a single database connection.
This change disables the func_odbc specific behavior if
the res_odbc module is running with only a single database
connection active. The connection is only kept for the
duration of the request.
ASTERISK-26177 #close
Change-Id: I9bdbd8a300fb3233877735ad3fd07bce38115b7f
When res_corosync detects that a node leaves or joins, it currently is
informed of this via Corosync callbacks. However, there are a few
limitations with the information presented:
(1) While we have information that Corosync is aware of - such as the
Corosync nodeid - that information is really only useful inside of
Corosync or res_corosync. There's no way to translate a Corosync
nodeid to some other internally useful unique identifier for the
Asterisk instance that just joined or left the cluster.
(2) While res_corosync is notified of the instance joining or leaving
the cluster, it has no mechanism to inform the Asterisk core or
other modules of this event. This limits the usefulness of res_corosync
as a heartbeat mechanism for other modules.
This patch addresses both issues.
First, it adds the notion of a cluster discovery message both within the
Stasis message bus, as well as the binary event messages that
res_corosync uses to transmit data back and forth within the cluster.
When Asterisk joins the cluster, it sends a discovery message to the other
nodes in the cluster, which correlates the Corosync nodeid along with
the Asterisk EID. res_corosync now maintains a hash of Corosync nodeids
to Asterisk EIDs, such that it can map changes in cluster state with the
Asterisk instance that has that nodeid. Likewise, when an Asterisk
instance receives a discovery message from a node in the cluster, it now
sends its own discovery message back to the originating node with the
local Asterisk EID. This lets Asterisk instances within the cluster
build a complete picture of the other Asterisk instances within the
cluster.
Second, it publishes the discovery messages onto the Stasis message bus.
Said messages are published whenever a node joins or leaves the cluster.
Interested modules can subscribe for the ast_cluster_discovery_type()
message under the ast_system_topic() and be notified when changes in
cluster state occur.
Change-Id: I9015f418d6ae7f47e4994e04e18948df4d49b465
If specified, incoming SUBSCRIBE requests will be searched for the matching
extension in the indicated context. If no "subscribe_context" is specified,
then the "context" setting is used.
ASTERISK-25471 #close
Change-Id: I3fb7a15f5bc154079bd348c08b7ad1cdd2d5e514
Updated the macro-set autoconf/libcurl.m4 to its latest upstream version. This
avoids a warning about an obsolete macro on AC_HELP_STRING, because Asterisk is
using AS_HELP_STRING everywhere else already.
ASTERISK-26046
Change-Id: I8299faf504ceaeee3e39930c59293809e116c631
Adding format_name even to the end of ast_codec caused issued with
binary codec modules because the pointer would be garbage in asterisk
when they registered. So, the ast_codec structure was reverted and an
internal_ast_codec structure was created just for use in codec.c. A new
internal-only API was also added (__ast_codec_register_with_format) so
that codec_builtin could register codecs with the format_name in a
separate parameter rather than in the ast_codec structure.
ASTERISK-26144 #close
Reported-by: Alexei Gradinari
Change-Id: I6df1b08f6a6ae089db23adfe1ebc8636330265ba
Removed the obsolete macro AC_TYPE_SIGNAL because Asterisk does not use K&R C
but requires ANSI C anyway.
ASTERISK-26046
Change-Id: I914c014385e1862102d90fe7650621def78db02e
A non-existent constraint was being referenced in the upgrade script.
This patch corrects the problem by removing the reference.
This patch fixes another realtime problem as well. Our Alembic scripts
store booleans as yes or no values. However, Sorcery tries to insert
"true" or "false" instead. This patch updates Sorcery to use "yes" and
"no"
ASTERISK-26128 #close
Change-Id: I366dbbf91418a9cb160b3ca74b0e59b5ac284bec
The patch removes updating all Endpoints' status on startup.
Instead, only non-qualified aors with static contact
and non-qualified non-expired contacts are retrieved from the realtime to
update the endpoint status to ONLINE.
The endpoint name was added to the contact object to simply find the endpoint
that created this contact.
The status of endpoints with qualified aors will be updated by 'qualify'
functions.
ASTERISK-26061 #close
Change-Id: Id324c1776fa55d3741e0c5457ecac0304cb1a0df
Occasionally under load we'll attempt to send a final NOTIFY on a
subscription that's already been terminated and a SEGV will occur
down in pjproject's evsub_destroy function. This is a result of a
race condition between all the paths that can generate a notify
and/or destroy the underlying pjproject evsub object:
* The client can send a SUBSCRIBE with Expires: 0.
* The client can send a SUBSCRIBE/refresh.
* The subscription timer can expire.
* An extension state can change.
* An MWI event can be generated.
* The pjproject transaction timer (timer_b) can expire.
Normally when our pubsub_on_evsub_state is called with a terminate,
we push a task to the serializer and return at which point the dialog
is unlocked. This is usually not a problem because the task runs
immediately and locks the dialog again. When the system is heavily
loaded though, there may be a delay between the unlock and relock
during which another event may occur such as the subscription timer
or timer_b expiring, an extension state change, etc. These may also
cause a terminate to be processed and if so, we could cause pjproject
to try to destroy the evsub structure twice. There's no way for us to
tell that the evsub was already destroyed and the evsub's group lock
can't tolerate this and SEGVs.
The remedy is twofold.
* A patch has been submitted to Teluu and added to the bundled
pjproject which adds add/decrement operations on evsub's group lock.
* In res_pjsip_pubsub:
* configure.ac and pjproject-bundled's configure.m4 were updated
to check for the new evsub group lock APIs.
* We now add a reference to the evsub group lock when we create
the subscription and remove the reference when we clean up the
subscription. This prevents evsub from being destroyed before
we're done with it.
* A state has been added to the subscription tree structure so
termination progress can be tracked through the asyncronous tasks.
* The pubsub_on_evsub_state callback has been split so it's not doing
double duty. It now only handles the final cleanup of the
subscription tree. pubsub_on_rx_refresh now handles both client
refreshes and client terminates. It was always being called for
both anyway.
* The serialized_on_server_timeout task was removed since
serialized_pubsub_on_rx_refresh was almost identical.
* Missing state checks and ao2_cleanups were added.
* Some debug levels were adjusted to make seeing only off-nominal
things at level 1 and nominal or progress things at level 2+.
ASTERISK-26099 #close
Reported-by: Ross Beer.
Change-Id: I779d11802cf672a51392e62a74a1216596075ba1
Announcer channels were not being destroyed because the
stasis_app_control structure that referenced them was not being
destroyed. The control structure was not being destroyed because it was
not being unlinked from its container. It was not being unlinked from
its container because the after bridge callback for the announcer
channel was not being run. The after bridge callback was not being run
because the after bridge datastore was not being removed from the
channel on destruction. The channel was not being destroyed because the
hangup that used to destroy the channel was now only reducing the
reference count to one. The reference count of the channel was only
being reduced to one because the stasis_app_control structure was
holding the final reference...
The control structure used to not keep a reference to the channel, so
that loop described above did not happen.
The solution is to manually remove the control structure from its
container when the playback on a bridge is complete.
ASTERISK-26083 #close
Reported by Joshua Colp
Change-Id: I0ddc0f64484ea0016245800b409b567dfe85cfb4
A crash can occur in res_hep_pjsip or res_hep_rtcp if res_hep has not
loaded and does not have a configuration file. Previously when this
occurred, checks were put in to see if the configuration was loaded
successfully. While this is a good idea - and has been added to the
offending function in res_hep - the reality is res_hep_pjsip and
res_hep_rtcp have no business running if res_hep isn't also running.
As such, this patch also adds a function to res_hep that returns whether
or not it successfully loaded. Oddly enough, ast_module_check returns
"everything is peachy" even if a module declined its load - so it cannot
be solely relied on. res_hep_pjsip and res_hep_rtcp now also check this
function to see if they should continue to load; if it fails, they
decline their load as well.
ASTERISK-26096 #close
Change-Id: I007e535fcc2e51c2ca48534f48c5fc2ac38935ea
POSIX defines poll.h, sys/poll.h should not be used at is c-library
internal header which may or may not exist. Notable in musl it
generates warning of being incorrect. And add explict include of
sys/cdefs.h where needed.
Change-Id: I142930df53fe7585a06b854b6faddc5301e024be
Stasis subscriptions and message routers create taskprocessors to process
the event messages. API calls are needed to be able to set the congestion
levels of these taskprocessors for selected subscriptions and message
routers.
* Updated CDR, CEL, and manager's stasis subscription congestion levels
based upon stress testing. Increased the congestion levels to reduce the
potential for bursty call setup/teardown activity from triggering the
taskprocessor overload alert. CDRs in particular need an extra high
congestion level because they can take awhile to process the stasis
messages.
ASTERISK-26088
Reported by: Richard Mudgett
Change-Id: Id0a716394b4eee746dd158acc63d703902450244
Sorcery creates taskprocessors for object types to process object observer
callbacks. An API call is needed to be able to set the congestion levels
of these taskprocessors for selected object types.
* Updated PJSIP's contact and contact_status sorcery object type observer
default congestion levels based upon stress testing. Increased the
congestion levels to reduce the potential for bursty register/unregister
and subscribe/unsubscribe activity from triggering the taskprocessor
overload alert.
ASTERISK-26088
Reported by: Richard Mudgett
Change-Id: I4542e83b556f0714009bfeff89505c801f1218c6
When taskprocessors get backed up, there is a good chance that we are
being overloaded and need to defer adding new work to the system.
* Implemented a high/low water alert mechanism for modules to check if the
system is being overloaded and take appropriate action. When a
taskprocessor is created it has default congestion levels set. A
taskprocessor can later have those congestion levels altered for specific
needs if stress testing shows that the taskprocessor is a symptom of
overloading or needs to handle bursty activity without triggering an
overload alert.
* Add CLI "core show taskprocessor" low/high water columns.
* Fixed __allocate_taskprocessor() to not use RAII_VAR(). RAII_VAR() was
never a good thing to use when creating a taskprocessor because of the
nature of how its references needed to be cleaned up on a partial
creation.
* Made res_pjsip's distributor check if the taskprocessor overload alert
is active before placing a message representing brand new work onto a
distributor serializer.
ASTERISK-26088
Reported by: Richard Mudgett
Change-Id: I182f1be603529cd665958661c4c05ff9901825fa
We must continue using the serializer that the original INVITE came in on
for the dialog. There may be retransmissions already enqueued in the
original serializer that can result in reentrancy and message sequencing
problems.
Outgoing call legs create the pjsip/outsess/<endpoint> serializers for
their dialogs.
ASTERISK-26088
Reported by: Richard Mudgett
Change-Id: I24d7948749c582b8045d5389ba3f6588508adbbc
Incoming messages that are not part of a dialog or a recognized response
to one of our requests need to be sent to a consistent serializer. Under
load we may be queueing retransmissions before we can process the original
message. We don't need to throw these messages onto random serializers
and cause reentrancy and message sequencing problems.
* Created a pool of pjsip/distributor serializers that get picked by
hashing the call-id and remote tag strings of the received messages.
* Made ast_sip_destroy_distributor() destroy items in the reverse order of
creation.
ASTERISK-26088
Reported by: Richard Mudgett
Change-Id: I2ce769389fc060d9f379977f559026fbcb632407
If you create a local channel and don't specify an originator channel
to take capabilities from, we automatically add all audio formats to
the new channel's capabilities. When we try to make the channel
compatible with another, the "best format" functions pick the best
format available, which in this case will be slin192. While this is
great for preserving quality, it's the worst for performance and
overkill for the vast majority of applications.
In the absense of any other information, adding all formats is the
correct thing to do and it's not always possible to supply an
originator so a new parameter 'formats' has been added to the channel
create/originate functions. It's just a comma separated list of formats
to make availalble for the channel. Example: "ulaw,slin,slin16".
'formats' and 'originator' are mutually exclusive.
To facilitate determination of format names, the format name has been
added to "core show codecs".
ASTERISK-26070 #close
Change-Id: I091b23ecd41c1b4128d85028209772ee139f604b
As res_pjsip_nat rewrites contact's address, only the last Via header
can contain the source address of registered endpoint.
Also Call-Id header may contain the source address of registered
endpoint.
Added "via_addr", "via_port", "call_id" to contact.
Added new fields ViaAddress, CallID to AMI event ContactStatus.
ASTERISK-26011
Change-Id: I36bcc0bf422b3e0623680152d80486aeafe4c576
The characters 0x80-0xFF were trimmed as well as 0x00-0x20 because of
a signed comparison.
ASTERISK-25669 #close
Reported by: Jesper
patches:
strings.curl.trim.patch submitted by Jesper (License 5518)
Change-Id: Ia51e169f24e3252a7ebbaab3728630138ec6f60a
With the old SIP module we can use IP access controls per peer.
PJSIP module missing this feature.
This patch added next configuration Endpoint options:
"acl" - list of IP ACL section names in acl.conf
"deny" - List of IP addresses to deny access from
"permit" - List of IP addresses to permit access from
"contact_acl" - List of Contact ACL section names in acl.conf
"contact_deny" - List of Contact header addresses to deny
"contact_permit" - List of Contact header addresses to permit
This patch also better logging failed request:
add custom message instead of "No matching endpoint found"
add SIP method to logging
ASTERISK-25900
Change-Id: I456dea3909d929d413864fb347d28578415ebf02
At one point in time, it seemed like a good idea to use the Asterisk
channel name as the HEP correlation UUID. In particular, it felt like
this would be a useful identifier to tie PJSIP messages and RTCP
messages together, along with whatever other data we may eventually send
to Homer. This also had the benefit of keeping the correlation UUID
channel technology agnostic.
In practice, it isn't as useful as hoped, for two reasons:
1) The first INVITE request received doesn't have a channel. As a
result, there is always an 'odd message out', leading it to be
potentially uncorrelated in Homer.
2) Other systems sending capture packets (Kamailio) use the SIP Call-ID.
This causes RTCP information to be uncorrelated to the SIP message
traffic seen by those capture nodes.
In order to support both (in case someone is trying to use res_hep_rtcp
with a non-PJSIP channel), this patch adds a new option, uuid_type, with
two valid values - 'call-id' and 'channel'. The uuid_type option is used
by a module to determine the preferred UUID type. When available, that
source of a correlation UUID is used; when not, the more readily available
source is used.
For res_hep_pjsip:
- uuid_type = call-id: the module uses the SIP Call-ID header value
- uuid_type = channel: the module uses the channel name if available,
falling back to SIP Call-ID if not
For res_hep_rtcp:
- uuid_type = call-id: the module uses the SIP Call-ID header if the
channel type is PJSIP and we have a channel,
falling back to the Stasis event provided
channel name if not
- uuid_type = channel: the module uses the channel name
ASTERISK-25352 #close
Change-Id: Ide67e59a52d9c806e3cc0a797ea1a4b88a00122c
The pjsua and pjsystest apps are now built only if TEST_FRAMEWORK is set.
The python bindings are now built only if TEST_FRAMEWORK is set and a
python development package is installed.
libresample was also disabled.
ASTERISK-25993 #close
Reported-by: Joshua Colp
Change-Id: If4e91c503a02f113d5b71bc8b972081fa3ff6f03
With the old SIP module AMI sends PeerStatus event on every
successfully REGISTER requests, ie, on start registration,
update registration and stop registration.
With PJSIP AMI sends ContactStatus only when status is changed.
Regarding registration:
on start registration - Created
on stop registration - Removed
but on update registration nothing
This patch added contact.updated event.
ASTERISK-25904
Change-Id: I8fad8aae9305481469c38d2146e1ba3a56d3108f
If the Asterisk system name is set in asterisk.conf, it will be stored
into the "reg_server" field in the ps_contacts table to facilitate
multi-server setups.
ASTERISK-25931
Change-Id: Ia8f6bd2267809c78753b52bcf21835b9b59f4cb8
A feature of chan_sip that service providers relied upon was the ability to
identify by the Authorization username. This is most often used when customers
have a PBX that needs to register rather than identify by IP address. From my
own experiance, this is pretty common with small businesses who otherwise
don't need a static IP.
In this scenario, a register from the customer's PBX may succeed because From
will usually contain the PBXs account id but an INVITE will contain the caller
id. With nothing recognizable in From, the service provider's Asterisk can
never match to an endpoint and the INVITE just stays unauthorized.
The fixes:
A new value "auth_username" has been added to endpoint/identify_by that
will use the username and digest fields in the Authorization header
instead of username and domain in the the From header to match an endpoint,
or the To header to match an aor. This code as added to
res_pjsip_endpoint_identifier_user rather than creating a new module.
Although identify_by was always a comma-separated list, there was only
1 choice so order wasn't preserved. So to keep the order, a vector was added
to the end of ast_sip_endpoint. This is only used by res_pjsip_registrar
to find the aor. The res_pjsip_endpoint_identifier_* modules are called in
globals/endpoint_identifier_order.
Along the way, the logic in res_pjsip_registrar was corrected to match
most-specific to least-specific as res_pjsip_endpoint_identifier_user does.
The order is:
username@domain
username@domain_alias
username
Auth by username does present 1 problem however, the first INVITE won't have
an Authorization header so the distributor, not finding a match on anything,
sends a securty_alert. It still sends a 401 with a challenge so the next
INVITE will have the Authorization header and presumably succeed. As a result
though, that first security alert is actually a false alarm.
To address this, a new feature has been added to pjsip_distributor that keeps
track of unidentified requests and only sends the security alert if a
configurable number of unidentified requests come from the same IP in a
configurable amout of time. Those configuration options have been added to
the global config object. This feature is only used when auth_username
is enabled.
Finally, default_realm was added to the globals object to replace the hard
coded "asterisk" used when an endpoint is not yet identified.
The testsuite tests all pass but new tests are forthcoming for this new
feature.
ASTERISK-25835 #close
Reported-by: Ross Beer
Change-Id: I30ba62d208e6f63439600916fcd1c08a365ed69d
This patch added new global pjsip option 'disable_multi_domain'.
Disabling Multi Domain can improve Realtime performance by reducing
number of database requests.
ASTERISK-25930 #close
Change-Id: I2e7160f3aae68475d52742107949a799aa2c7dc7
* changes:
test_message.c: Wait longer in case dialplan also processes the test message.
Manager: Short circuit AMI message processing.
manager.c: Eliminate most RAII_VAR usage.
manager_channels.c: Fix allocation failure crash.
Improve AMI message processing performance if there are no consumers
listening for the messages. We now skip creating the AMI event message
text strings.
Change-Id: I7b22fc5ec4e500d00635c1a467aa8ea68a1bb2b3
You cannot reference the passed in features struct after calling
ast_bridge_impart(). Even if the call fails.
Change-Id: I902b88ba0d5d39520e670fb635078a367268ea21
softmix_bridge_join() failed because of an allocation failure. To address
this, the softmix bridge technology now checks if the channel failed to
join softmix successfully. In addition, the bridge now begins the process
of kicking the channel out of the bridge so we don't have channels
partially in the bridge for very long.
* Fix the test_channel_feature_hooks.c unit tests. The test channel must
have a valid codec to join the simple_bridge technology. This patch makes
joining a bridge more strict by not allowing partially joined channels to
remain in the bridge.
Change-Id: I97e2ade6a2bcd1214f24fb839fda948825b61a2b
An earlier patch blocked the ast_bridge_impart() call until the channel
either entered the target bridge or it failed. Unfortuantely, if the
target bridge is stasis and the imprted channel is not a stasis channel,
stasis bounces the channel out of the bridge to come back into the bridge
as a proper stasis channel. When the channel is bounced out, that
released the block on ast_bridge_impart() to continue. If the impart was
a result of a transfer, then it became a race to see if the swap channel
would get hung up before the imparted channel could come back into the
stasis bridge. If the imparted channel won then everything is fine. If
the swap channel gets hung up first then the transfer will fail because
the swap channel is leaving the bridge.
* Allow a chain of ast_bridge_impart()'s to happen before any are
unblocked to prevent the race condition described above. When the channel
finally joins the bridge or completely fails to join the bridge then the
ast_bridge_impart() instances are unblocked.
ASTERISK-25947
Reported by: Richard Mudgett
ASTERISK-24649
Reported by: John Bigelow
ASTERISK-24782
Reported by: John Bigelow
Change-Id: I8fef369171f295f580024ab4971e95c799d0dde1
There are several places that do scheduled tasks or periodic housecleaning,
each with its own implementation:
* res_pjsip_keepalive has a thread that sends keepalives.
* pjsip_distributor has a thread that cleans up expired unidentified requests.
* res_pjsip_registrar_expire has a thread that cleans up expired contacts.
* res_pjsip_pubsub uses ast_sched directly and then calls ast_sip_push_task.
* res_pjsip_sdp_rtp also uses ast_sched to send keepalives.
There are also places where we should be doing scheduled work but aren't.
A good example are the places we have sorcery observers to start registration
or qualify. These don't work when changes are made to a backend database
without a pjsip reload. We need to check periodically.
As a first step to solving these issues, a new ast_sip_sched facility has
been created.
ast_sip_sched wraps ast_sched but only uses ast_sched as a scheduled queue.
When a task is ready to run, ast_sip_task_pusk is called for it. This ensures
that the task is executed in a PJLIB registered thread and doesn't hold up the
ast_sched thread so it can immediately continue processing the queue. The
serializer used by ast_sip_sched is one of your choosing or a random one from
the res_pjsip pool if you don't choose one.
Another feature is the ability to automatically clean up the task_data when the
task expires (if ever). If it's an ao2 object, it will be dereferenced, if
it's a malloc'd object it will be freed. This is selectable when the task is
scheduled. Even if you choose to not auto dereference an ao2 task data object,
the scheduler itself maintains a reference to it while the task is under it's
control. This prevents the data from disappearing out from under the task.
There are two scheduling models.
AST_SIP_SCHED_TASK_PERIODIC specifies that the invocations of the task occur at
the specific interval. That is, every "interval" milliseconds, regardless of
how long the task takes. If the task takes longer than the interval, it will
be scheduled at the next available multiple of interval. For exmaple: If the
task has an interval of 60 secs and the task takes 70 secs (it better not),
the next invocation will happen at 120 seconds.
AST_SIP_SCHED_TASK_DELAY specifies that the next invocation of the task should
start "interval" milliseconds after the current invocation has finished.
Also, the same ast_sched facility for fixed or variable intervals exists. The
task's return code in conjunction with the AST_SIP_SCHED_TASK_FIXED or
AST_SIP_SCHED_TASK_VARIABLE flags controls the next invocation start time.
One res_pjsip.h housekeeping change was made. The pjsip header files were
added to the top. There have been a few cases lately where I've needed
res_pjsip.h just for ast_sip calls and had compiles fail spectacularly because
I didn't add the pjsip header files to my source even though I never referenced
any pjsip calls.
Finally, a few new convenience APIs were added to astobj2 to make things a
little easier in the scheduler. ao2_ref_and_lock() calls ao2_ref() and
ao2_lock() in one go. ao2_unlock_and_unref() does the reverse. A few macros
were also copied from res_phoneprov because I got tired of having to duplicate
the same hash, sort and compare functions over and over again. The
AO2_STRING_FIELD_(HASH|SORT|CMP)_FN macros will insert functions suitable for
aor_container_alloc into your source.
This facility can be used immediately for the situations where we already have
a thread that wakes up periodically or do some scheduled work. For the
registration and qualify issues, additional sorcery and schema changes would
need to be made so that we can easily detect changed objects on a periodic
basis without having to pull the entire database back to check. I'm thinking
of a last-updated timestamp on the rows but more on this later.
Change-Id: I7af6ad2b2d896ea68e478aa1ae201d6dd016ba1c
Contact expiration can occur in several places: res_pjsip_registrar,
res_pjsip_registrar_expire, and automatically when anyone calls
ast_sip_location_retrieve_aor_contact. At the same time, res_pjsip_registrar
may also be attempting to renew or add a contact. Since none of this was locked
it was possible for one thread to be renewing a contact and another thread to
expire it immediately because it was working off of stale data. This was the
casue of intermittent registration/inbound/nominal/multiple_contacts test
failures.
Now, the new named lock functionality is used to lock the aor during contact
expire and add operations and res_pjsip_registrar_expire now checks the
expiration with the lock held before deleting the contact.
ASTERISK-25885 #close
Reported-by: Josh Colp
Change-Id: I83d413c46a47796f3ab052ca3b349f21cca47059
Locking some objects like sorcery objects can be tricky because the underlying
ao2 object may not be the same for all callers. For instance, two threads that
call ast_sorcery_retrieve_by_id on the same aor name might actually get 2
different ao2 objects if the underlying wizard had to rehydrate the aor from a
database. Locking one ao2 object doesn't have any effect on the other even if
those objects had locks in the first place.
Named locks allow access control by keyspace and key strings. Now an "aor"
named "1000" can be locked and any other thread attempting to lock "aor" "1000"
will wait regardless of whether the underlying ao2 object is the same or not.
Mutex and rwlocks are supported.
This capability will initially be used to lock an aor when multiple threads may
be attempting to prune expired contacts from it.
Change-Id: If258c0b7f92b02d07243ce70e535821a1ea7fb45
Badalyan Vyacheslav
George Joseph
Corey Farrell
Kevin Harwell
Tzafrir Cohen
Richard Mudgett
zuul
Alexei Gradinari
Torrey Searle
Joshua Colp
Mark Michelson
Alexander Traud
Matt Jordan
Timo Teräs
Ivan Poddubny
George Joseph