Dialplan has to be careful about passing an empty device list or empty
positions in the list. As a result, dialplan has to check for these
conditions before using ChanIsAvail. Simplify dialplan by making
ChanIsAvail handle these conditions gracefully.
* Made tolerate empty positions in the device list.
* Simplified the code and eliminated some unnecessary indention.
ASTERISK-28638
Change-Id: I9e4b67e2cbf26b2417c2d03485b8568e898931d3
* Made BridgeAdd not hangup the call if there is a problem.
* Reduced message level from warning to verbose for normal exception
cases.
* Added a loop safety check to BridgeAdd.
* Made BridgeAdd set BRIDGERESULT with the status when dialplan is
resumed.
Change-Id: I374d39b8a3edcc794eeb5c6b9f31a01424cdc426
Dialplan has to be careful about passing an empty destination list or
empty positions in the list. As a result, dialplan has to check for
these conditions before using Dial. Simplify dialplan by making Dial
handle these conditions gracefully.
* Made tolerate empty positions in the dialed device list.
* Reduced some message log levels from notice to verbose.
ASTERISK-28638
Change-Id: I6edc731aff451f8bdfaee5498078dd18c3a11ab9
Dialplan has to be careful about passing an empty destination list or
empty positions in the list. As a result, dialplan has to check for
these conditions before using Page. Simplify dialplan by making Page
handle these conditions gracefully.
* Made tolerate empty positions in the paged device list.
* Reduced some warnings associated with the 's' option to verbose
messages. The warning level for those messages really serves no purpose
as that is why the 's' option exists.
ASTERISK-28638
Change-Id: I95b64a6d6800cd1a25279c88889314ae60fc21e3
Temporary channel lifespan is very short and CDR deactivation request
through ast_cdr_set_property() may happen when CDR is not available
yet. Use CDR_PROP() dialplan function instead, it will first wait
for pending CDR insertion requests to be processed.
ASTERISK-28636
Change-Id: I1cbe09e8d2169c0962c1195133ff260d291f2074
ConfBridge has the ability to move between different sample
rates for mixing the conference bridge. Up until now there has
only been the ability to set the conference bridge to mix at
a specific sample rate, or to let it move between sample rates
as necessary. This change adds the ability to configure a
conference bridge with a maximum sample rate so it can move
between sample rates but only up to the configured maximum.
ASTERISK-28658
Change-Id: Idff80896ccfb8a58a816e4ce9ac4ebde785963ee
ASTERISK_28143 attempted to fix an issue where calls with no audio would never
timeout. It did so by adding AST_FRAME_NULL as a frame type to process in its
calculations. Unfortunately these frames seem to show up at irregular time
intervals. This resulted in app_amd returning prematurely most of the time.
* Removed AST_FRAME_NULL from the calculations
* Added a check to see how much time has actually passed since app_amd began
ASTERISK-28608
Change-Id: I642a21b02d389b17e40ccd5357754b034c3daa42
This patch fixes several issues reported by the lgtm code analysis tool:
https://lgtm.com/projects/g/asterisk/asterisk
Not all reported issues were addressed in this patch. This patch mostly fixes
confirmed reported errors, potential problematic code points, and a few other
"low hanging" warnings or recommendations found in core supported modules.
These include, but are not limited to the following:
* innapropriate stack allocation in loops
* buffer overflows
* variable declaration "hiding" another variable declaration
* comparisons results that are always the same
* ambiguously signed bit-field members
* missing header guards
Change-Id: Id4a881686605d26c94ab5409bc70fcc21efacc25
The following modules needed tweaks for API changes.
addons/cdr_mysql.c
addons/chan_ooh323.c
apps/app_meetme.c
ASTERISK-28604
Change-Id: Ib40e513ae55b5114be035cdc929abb6a8ce2d06d
If you specify multiple formats in voicemail.conf, eg. "format = gsm|wav"
and are using realtime ODBC backend, only the first format gets stored
in the database. So when you forward a message later on, there is a bug
generating the email, related to the stored format (GSM) being different
than the desired email format (WAV) specified for the user. Sox can
handle this, but Asterisk needs to tell sox exactly what to do.
ASTERISK-22192
Change-Id: I7321e7f7e7c58adbf41dd4fd7191c887b9b2eafd
This reverts commit fd2e8d0da7.
Reason for revert: Problematic for users who store their voicemail
on network storage devices, or share voicemail storage between
multiple Asterisk instances.
ASTERISK-28567 #close
Change-Id: I3ff4ca983d8e753fe2971f3439bd154705693c41
ChanIsAvail() creates a temporary channel with ast_request() to test
resource availability. It should not generate a CDR when it hangs up
this temporary channel.
This patch disables CDR generation for the temporary channel with
ast_cdr_set_property().
ASTERISK-28527
Change-Id: I7b0555c6909c7d322e452dde97c9ea5b111552d1
There are 4 scenarios to consider when capturing audio from a channel
with an audiohook:
1. There is no rx and no tx audio, so return nothing.
2. There is rx but no tx audio, so return rx.
3. There is tx but no rx audio, so return tx.
4. There is rx and tx audio, so mix them and return.
The file passed as the primary argument to MixMonitor will be written to
in scenarios 2, 3, and 4. However, if you pass the r() and t() options
to MixMonitor, a frame will only be written to the r() file if there was
rx audio and a frame will only be written to the t() file if there was
tx audio.
If you subsequently take the r() and t() files and try to mix them, the
sides of the conversation will 'drift' and be non-representative of the
user experience.
This patch adds a new 'S' option to MixMonitor that injects a frame of
silence on either the r() side or the t() side of the channel so that
when later mixed, there is no such drift.
Change-Id: Ibf5ed73a811087727bd561a89a59f4447b4ee20e
The function leave_voicemail checks if expungeonhangup is set,
but does not check if IMAP stream is closed,
so it could call imap function with NULL stream.
This leads to segfault.
ASTERISK-28505 #close
Change-Id: Ib66c57c1f1ba97774e447b36349198e2626a8d7c
You now select voicemail backends like normal dialplan applications, so
there is no longer a need for their own menuselect category.
Reported by snuff-work in #asterisk-dev
Change-Id: Idfa4c9c8349726074318a9e6b68d24c374521005
There were still a few places in the code that could overflow when "packing"
a json object with a value outside the base type integer's range. For instance:
unsigned int value = INT_MAX + 1
ast_json_pack("{s: i}", value);
would result in a negative number being "packed". In those situations this patch
alters those values to a ast_json_int_t, which widens the value up to a long or
long long.
ASTERISK-28480
Change-Id: Ied530780d83e6f1772adba0e28d8938ef30c49a1
app_voicemail utilized the stasis cache when polling mailboxes for MWI. This
caused a memory leak (items were not being appropriately removed from the
cache), and subsequent slowdown in system processing. This patch removes the
stasis cache dependency, thus alleviating the memory leak. It does this by
utilizing the new MWI API that better manages state lifetime.
ASTERISK-28443
ASTERISK-27121
Change-Id: Ie89fedaca81ea1fd03d150d9d3a1ef3d53740e46
Changes made to apps/Makefile to optionally build all three app_voicemail
variations at the same time: 1) file (default), 2) odbc, and 3) imap.
This functionality was requested by users. modules.conf.sample warns the
user to make sure only one voicemail is loaded at a time.
Change-Id: Iba3cd8ffb4b7e8b1c64a11dd383e1eafcd3ed0e7
Now AMD algorithm will not ignore AST_FRAME_NULL, As I think using manual
wait time instead of `framelength` is enough to fix timeout / TOOLONG issue.
ASTERISK-28419 #close
Change-Id: I16ea2d6295bc99b975e8c092e5f9fbd9214debdb
When a channel already in a conference bridge is attended transfered
to another extension, or when an existing call is attended
transferred into a conference bridge, we now generate ConfbridgeJoin
and ConfbridgeLeave events for the entering and departing channels.
Change-Id: Id7709cfbceb26fbcb828b2d0d2a6b2fbeaf028e1
AttendedTransfer queues up attended transfer to the given extension.
This application can be useful with Custom Dynamic Features.
For example to make attended transfer to a predefined number.
features.conf
;;;
[applicationmap]
my_atxfer => *7,self,GoSub,"my_atxfer,s,1",default
;;;
extensions.conf
;;;
[globals]
DYNAMIC_FEATURES=my_atxfer
TRANSFER_CONTEXT=my_transfer
[my_atxfer]
exten => s,1,AttendedTransfer(1234567890)
same => n,Return()
[my_transfer]
include => default
;;;
This application also can be used to completly redefine Attended transfer
feature using dialplan. For example:
features.conf
;;;
[featuremap]
atxfer => *7
[applicationmap]
custom_atxfer => *2,self,GoSub,"custom_atxfer,s,1",default
;;;
extensions.conf
;;;
[globals]
DYNAMIC_FEATURES=custom_atxfer
TRANSFER_CONTEXT=my_transfer
[custom_atxfer]
exten => s,1,
same => n,Playback(pbx-transfer)
same => n,Read(dest,dial,10,i,3,3)
same => n,AttendedTransfer(${dest})
same => n,Return()
[my_transfer]
include => default
;;;
Change-Id: Ie5cfa455d0813cffd5c85a6fb117f07d8f0b903b
BlindTransfer redirects all channels currently bridged to the
caller channel to the specified destination.
This application can be useful with Custom Dynamic Features.
For example to make blind transfer to a predefined number.
features.conf
;;;
[applicationmap]
my_blindxfer => *6,self,GoSub,"my_blindxfer,s,1",default
;;;
extensions.conf
;;;
[globals]
DYNAMIC_FEATURES=my_blindxfer
[my_blindxfer]
exten => s,1,BlindTransfer(1234567890,default)
same => n,Return()
;;;
This application also can be used to completly redefine Blind transfer
feature using dialplan. For example:
features.conf
;;;
[featuremap]
blindxfer =>
[applicationmap]
custom_blindxfer => ##,self,GoSub,"custom_blindxfer,s,1",default
;;;
extensions.conf
;;;
[globals]
DYNAMIC_FEATURES=custom_blindxfer
[custom_blindxfer]
exten => s,1,
same => n,Playback(pbx-transfer)
same => n,Read(dest,dial,10,i,3,3)
same => n,BlindTransfer(${dest},default)
same => n,Return()
;;;
Change-Id: I9d55e7f69ccfd4472dec00d62771d6de8803215a
This patch adds the 'p' option.
The extension entered will be considered complete when a # is entered.
Change-Id: If77c40c9c8b525885730821e768f5dea71cf04c1
Various fixes for issues caught by gcc 9. Mostly snprintf
trying to copy to a buffer potentially too small.
ASTERISK-28412
Change-Id: I9e85a60f3c81d46df16cfdd1c329ce63432cf32e
When producing a combined REMB value the normal behavior
is to have a REMB value which is unique for each sender
based on all of their receivers. This can result in one
sender having low bitrate while all the rest are high.
This change adds "all" variants which produces a bridge
level REMB value instead. All REMB reports are combined
together into a single REMB value that is the same for
each sender.
ASTERISK-28401
Change-Id: I883e6cc26003b497c8180b346111c79a131ba88c
There a long history here:
In commit dd1e62c095 has introduce by default shared_lastcall = true by
default but this now only happen is there not [general] directive in
queues.conf
After that, the commit 4b50e3f1ee fix the
sample file.
We'll need to keep the same setting if there a general or not section in
configuration file since the shared_lastcall is by a long time in
sample files as default value to 'no'.
Change-Id: Id44faec370136df8d57902b453ad4059ed21b94c
Added RINGTIME, RINGTIME_MS, PROGRESSTIME, PROGRESSTIME_MS variables filled
at the earliest received PROGRESS or RINGING.
Added millisecond versions of DIALEDTIME and ANSWEREDTIME.
Added millisecond versions of ast_channel_get_up_time and
ast_channel_get_duration in channel.c.
ASTERISK-28363
Change-Id: If95f1a7d8c4acbac740037de0c6e3109ff6620b1
There is enough MWI functionality to warrant it having its own 'c' and header
files. This patch moves all current core MWI data structures, and functions
into the following files:
main/mwi.h
main/mwi.c
Note, code was simply moved, and not modified. However, this patch is also in
preparation for core MWI changes, and additions to come.
Change-Id: I9dde8bfae1e7ec254fa63166e090f77e4d3097e0
Because the per-mailbox options are the last thing on a line, don't look
for or stomp on any subsequent commas.
ASTERISK-27935 #close
Reported by: Sébastien Duthil
Change-Id: I07b2eb4a33c303d0c7114d5b906f8c067c60a153
If Asterisk crashes while a VM directory is locked, lock files in the VM
spool directory will not get properly cleaned up. We now clear them on
module load.
ASTERISK-20207 #close
Reported by: Steven Wheeler
Change-Id: If40ccd508e2f6e5ade94dde2f0bcef99056d0aaf
* Always set member->lastpause when setting member->paused
* Fixed typo (using member->lastcall instead of member->lastpause) in
'queue show' output.
* Use a constant 'now' in 'queue show' output for a better point-in-time
view of time based stats.
ASTERISK-27541 #close
Reported by: César Benjamín García Martínez
Change-Id: Ib41ced90cfdb66f9bb1e7b263d0f6fc1ac6e18fa
It was a copy/paste of the QUEUE_MEMBER_COUNT function's synopsis.
ASTERISK-20986 #close
Reported by: Olivier Krief
Change-Id: If51ec481feb35824a4e78ab5600b197b819b10be
Fixes an intermittent segmentation fault which occured when accessing
nativeformats of a channel which entered into a queue.
ASTERISK-27964
Reported by: Francisco Seratti
Change-Id: Ic87fa7a363f3b487c24ce07032f4b2201c22db9e
Topic names now follow: <subsystem>:<functionality>[/<object>]
This ensures that they are all unique, and also provides better
insight in to what each topic is for.
Subscriber ids now also use the main topic name they are
subscribed to and an incrementing integer as their identifier to
make it easier to understand what the subscription is primarily
responsible for.
Both the CLI commands for listing topic and subscription statistics
now sort to make it a bit easier to see what is going on.
Subscriptions will now show all topics that they are receiving messages
from, not just the main topic they were subscribed to.
ASTERISK-28335
Change-Id: I484e971a38c3640f2bd156282e532eed84bf220d
While the 'interface' column is a NOT NULL, the empty string is still
allowed. res_config_odbc treats the empty string as a NULL and we crash
when trying to dereference.
Also cleaned up an adjacent error message for consistency.
ASTERISK-28168 #close
Change-Id: I55e012b540fbcda99bb40bede3099b7ae5db8202
This change add ability to set the wrapuptime per-member using the
AddQueueMember application.
The feature to set wrapuptime per member was include in the issue
ASTERISK-27483 for static member by configuration file and was not
added to set from AddQueueMember.
ASTERISK-28055 #close
Change-Id: I7c7ee4a6f804922cd7c42cb02eea26eb3806c6cf
When Asterisk is connected and used with a database the response
time of the database can cause problems in Asterisk if it is long.
Normally the only way to see this problem would be to retrieve a
backtrace from Asterisk and examine where things are blocked, or
examine the database to see if there is any indication of a
problem.
This change adds some basic query logging to make it easier to
investigate such a problem. When logging is enabled res_odbc will
now keep track of the number of queries executed, as well as the
query that has taken the longest time to execute. There is also
an option which will cause a WARNING message to be output if a
query takes longer than a configurable amount of time to execute.
This makes it easier and clearer for users that their database may
be experiencing a problem that could impact Asterisk.
ASTERISK-28277
Change-Id: I173cf4928b10754478a6a8c27dfa96ede0f058a6
You can now define an "aliases" context in voicemail.conf
whose entries point to actual mailboxes. These can be used anywhere
the mailbox is specified.
Example:
[general]
aliasescontext = myaliases
[default]
1234 = yadayada
[myaliases]
4321@devices = 1234@default
Now you can use 4321@devices to refer to the 1234@default mailbox.
This can be useful to provide channel drivers with constant
mailbox specifications such as <extension>@devices leaving
app_voicemail to control exactly which mailbox the alias points to.
Now, only voicemail has to be reloaded to make changes instead of
individual channel drivers which are usually more expensive to
reload.
Change-Id: I395b9205c91523a334fe971be0d1de4522067b04
If a voicemail is marked "urgent" then the VM_MESSAGEFILE channel variable is
not updated correctly since urgent messages are in a different directory. The
fix is to update the channel variable when the path to the urgent message is
created.
ASTERISK-28225
Change-Id: I8efbace06e6122ea0793f7bdb073d4378e8274ca
When using the 'b' option to Queue with a queue that was not configured
for ring all a crash would occur as the wrong pointer would be used.
ASTERISK-28218
Change-Id: If1390f64e321047dff24fd2410c95dde74904980
The free_user function was automatically deleting the stasis mailbox
state but this only makes sense when the mailbox is actually
deleted, not just the structure freed. This was causing issues
where leave_voicemail would publish the mwi message to stasis and
delete the state before the message could be processed by
res_pjsip_mwi.
* Removed the delete of state from free_user().
* Created a new free_user_final() function that both frees the data
structure and deletes the state. This function is only called
during module load/unload where it's appropriate to delete the
state.
ASTERISK-28215
Change-Id: I305e8b3c930e9ac41d901e5dc8a58fd7904d98dd
Currently the file sound_only_person is not played when a marked
user (with announce_only_user=yes) joins an empty conference.
This patch fixes it.
ASTERISK-28201 #close
Change-Id: I85b67687e6b220939c3af8091d83a70a7b174cf4
This reverts commit 29115e2384.
That commit closed a long standing hole which allowed subscriptions
to mailboxes that weren't configured in voicemail.conf. This
caused an issue with FreePBX which depdended on that behavior.
The commit is being reverted until FreePBX can handle the new
behavior.
ASTERISK-28151
Reported by: Ronald Raikes
Change-Id: I57b7b85e75d7dd97c742b5c69d718a0f61260c15
* The bridging core no longer uses the stasis cache for bridge
snapshots. The latest bridge snapshot is now stored on the
ast_bridge structure itself.
* The following APIs are no longer available since the stasis cache
is no longer used:
ast_bridge_topic_cached()
ast_bridge_topic_all_cached()
* A topic pool is now used for individual bridge topics.
* The ast_bridge_cache() function was removed since there's no
longer a separate container of snapshots.
* A new function "ast_bridges()" was created to retrieve the
container of all bridges. Users formerly calling
ast_bridge_cache() can use the new function to iterate over
bridges and retrieve the latest snapshot directly from the
bridge.
* The ast_bridge_snapshot_get_latest() function was renamed to
ast_bridge_get_snapshot_by_uniqueid().
* A new function "ast_bridge_get_snapshot()" was created to retrieve
the bridge snapshot directly from the bridge structure.
* The ast_bridge_topic_all() function now returns a normal topic
not a cached one so you can't use stasis cache functions on it
either.
* The ast_bridge_snapshot_type() stasis message now has the
ast_bridge_snapshot_update structure as it's data. It contains
the last snapshot and the new one.
* cdr, cel, manager and ari have been updated to use the new
arrangement.
Change-Id: I7049b80efa88676ce5c4666f818fa18ad1985369
When a channel snapshot was created it used to be done
from scratch, copying all data (many strings). This incurs
a cost when doing so.
This change segments the channel snapshot into different
components which can be reused if unchanged from the
previous snapshot creation, reducing the cost. In normal
cases this results in some pointers being copied with
reference count being bumped, some integers being set,
and a string or two copied. The other benefit is that it
is now possible to determine if a channel snapshot update
is redundant and thus stop it before a message is published
to stasis.
The specific segments in the channel snapshot were split up
based on whether they are changed together, how often they
are changed, and their general grouping. In practice only
1 (or 0) of the segments actually get changed in normal
operation.
Invalidation is done by setting a flag on the channel when
the segment source is changed, forcing creation of a new
segment when the channel snapshot is created.
ASTERISK-28119
Change-Id: I5d7ef3df963a88ac47bc187d73c5225c315f8423
Channels no longer use the Stasis cache for channel snapshots. Instead
they are stored in a hash table in stasis_channels which reduces the
number of Stasis messages created and allows better storage.
As a result the following APIs are no longer available since the stasis
cache is no longer used:
ast_channel_topic_cached()
ast_channel_topic_all_cached()
The ast_channel_cache_all() and ast_channel_cache_by_name() functions
now return an ao2_container of ast_channel_snapshots rather than
a container of stasis_messages therefore you can't (and don't need
to) call stasis_cache functions on it.
The ast_channel_topic_all() function now returns a normal topic not
a cached one so you can't use stasis cache functions on it either.
The ast_channel_snapshot_type() stasis message now has the
ast_channel_snapshot_update structure as it's data. It contains the
last snapshot and the new one.
ast_channel_snapshot_get_latest() still returns the latest snapshot.
The latest snapshot is now stored on the channel itself to eliminate
cache hits when Stasis messages that have the snapshot as a payload
are created.
ASTERISK-28102
Change-Id: I9334febff60a82d7c39703e49059fa3a68825786
Replace usage of ao2_container_alloc with ao2_container_alloc_hash or
ao2_container_alloc_list. Remove ao2_container_alloc macro.
Change-Id: I0907d78bc66efc775672df37c8faad00f2f6c088
This replaces the inline functions with macros. This removes the need
to directly use __ao2_ref, opts instead for standard ao2_bump and
ao2_cleanup macros.
Change-Id: If4e04e9bab2e3c883188437cb9f487b3e498a21b
This change adds the ability for subscriptions to indicate
which message types they are interested in accepting. By
doing so the filtering is done before being dispatched
to the subscriber, reducing the amount of work that has
to be done.
This is optional and if a subscriber does not add
message types they wish to accept and set the subscription
to selective filtering the previous behavior is preserved
and they receive all messages.
There is also the ability to explicitly force the reception
of all messages for cases such as AMI or ARI where a large
number of messages are expected that are then generically
converted into a different format.
ASTERISK-28103
Change-Id: I99bee23895baa0a117985d51683f7963b77aa190
The 'I' option currently blocks initial CONNECTEDLINE or REDIRECTING updates
from the called parties to the caller.
This patch also blocks updates in the other direction before call is
answered.
ASTERISK-27980
Change-Id: I6ce9e151a2220ce9e95aa66666933cfb9e2a4a01
Adding the "label" attribute used for participant info correlation
was previously done in app_confbridge but it wasn't working
correctly because it didn't have knowledge about which video
streams belonged to which channel. Only bridge_softmix has that
data so now it's set when the bridge topology is changed.
ASTERISK-28107
Change-Id: Ieddeca5799d710cad083af3fcc3e677fa2a2a499
* Update the post-answer documentation and example. The Dial example was
incorrect and misleading for the post-answer subroutine useage.
* Fix note and warning paragraphs in option descriptions. They don't show
up in the wiki.
Change-Id: I81019a1fd75d5b9151f76b52c38e2a90da682d14
Add attribute_warn_unused_result to ast_taskprocessor_push,
ast_taskprocessor_push_local and ast_threadpool_push. This will help
ensure we perform the necessary cleanup upon failure.
Change-Id: I7e4079bd7b21cfe52fb431ea79e41314520c3f6d
Declining the queue_member_status_type stasis message in stasis.conf
causes these messages to leak json objects.
* Add missing ast_json_unref() if the type is NULL in
queue_publish_member_blob().
ASTERISK-28084
Change-Id: I691ecf49bd1f7d9c29182e1eee8c4bb7103be9fc
The first attempt at publishing confbridge events to participants
involved publishing them at the same time stasis events were
created. This caused issues with bridge and channel locks. The
second attempt involved publishing them when the stasis events
were received by the code that published the confbridge AMI events.
This caused timing issues because, depending on resources available,
the event could be received before channels actually joined the
bridge and would therefore fail to send messages to the participant.
This attempt reverts to the original mechanism with one exception.
The join and leave events are published via bridge join and leave
hooks. This guarantees the states of the channels and bridge and
provides deterministic timing for event publishing.
Change-Id: I2660074f8a30a5224cb953d5e047ee84484a9036
This issue related to setting of holdtime, announcements, member delays.
It works well if we set the member delays to "0" and no announcements
and no holdtime.This issue will happen if we set member delays to "1",
"2"... or announcements or holdtime and hangs up the call during
processing it.
And here is the reason:
(At the step of answering a phone.)
It takes care any holdtime, announcements, member delays,
or other options after a call has been answered if it exists.
Normally, After the call has been aswered,
and we wait for the processing one of the cases of the member delays
or hold time or announcements finished, "if (ast_check_hangup(peer))"
will be not executed, then queue will be updated at update_queue().
Here, pending member will be removed.
However, after the call has been aswered,
if we hangs up the call during one of the cases of the member delays
or hold time or announcements, "if (ast_check_hangup(peer))"
will be executed.
outgoing = NULL and at hangupcalls, pending members will not be removed.
* This fixed patch will remove the pending member from container
before hanging up the call with outgoing is NULL.
ASTERISK-27920
Reported by: Cao Minh Hiep
Tested by: Cao Minh Hiep
Change-Id: Ib780fbf48ace9d2d8eaa1270b9d530a4fc14c855
app_voicemail wasn't properly cleaning up the stasis cache or the
mwi topic pool when the module was unloaded or when a user was
deleted as a result of a reload. This resulted in leaks in both
areas.
* app_voicemail now calls ast_delete_mwi_state_full when it frees
a user structure and ast_delete_mwi_state_full in turn now calls
the new stasis_topic_pool_delete_topic function to clear the topic
from the pool.
Change-Id: Ide23144a4a810e7e0faad5a8e988d15947965df8
The append_mailbox function wasn't calculating the correct length
to pass to ast_alloca and it wasn't handling the case where context
might be empty.
Found by the Address Sanitizer.
Change-Id: I7eb51c7bd18a7a8dbdba261462a95cc69e84f161
app_voicemail was using the stasis cache to build and maintain a
list of mailboxes that had subscribers. It then used this list
to determine if a mailbox should be polled for new messages if
polling was enabled. For this to work, stasis had to cache every
subscription and unsubscription to the mailbox which caused a lot of
overhead, both cpu and memory related.
Since polling is only required when changes are being made to
mailboxes outside of app_voicemail and since the number of mailboxes
that don't have any subscribers is likely to be very low, all
mailboxes are now polled instead of just the ones with subscribers.
This paves the way for disabling the caching of stasis subscription
change messages.
Also fixed cleanup in some of the unit tests that not only left
test users in the users list but also caused segfaults if the tests
were run more than once.
ASTERISK-27121
Change-Id: I5cceb737246949f9782955c64425b8bd25a9e9ee
I'm only seeing an error in 14+, so I assume it is due to different
compiler options:
app_queue.c: In function ‘handle_queue_add_member’:
app_queue.c:10234:19: error: ‘%d’ directive writing between 1 and 11
bytes into a region of size 3 [-Werror=format-overflow=]
sprintf(num, "%d", state);
^~
app_queue.c:10234:18: note: directive argument in the range
[-2147483648, 99]
sprintf(num, "%d", state);
^~~~
Compiler: gcc version 8.0.1 20180414 (experimental)
[trunk revision 259383] (Ubuntu 8-20180414-1ubuntu2)
Change-Id: I18577590da46829c1ea7d8b82e41d69f105baa10
When a call leaves a queue on leaveempty condition, QUEUESTATUS
must be set to LEAVEEMPTY, no matter whether Queue was executed with or
without the "c" (continue) option.
The regression was introduced in the fix for ASTERISK_25665.
The following fix (ASTERISK_27065) was incomplete, as QUEUESTATUS was
overwritten in case when "c" is set, regardless of what was the cause
for leaving the queue.
ASTERISK-27973 #close
Reported-by: Valentin Safonov
Change-Id: Iec013fe6a26a4e825ca572a1dda4f3cee5f6f80c
I have removed the STATIC_BUILD option immediately as it has not
been maintained in many years and is non-functional.
ASTERISK-27965
Change-Id: I64783d017b86dba9ee3c7bcfb97e59889a3f76d7
Previously, the msid "label" attribute was used to correlate
participant info but because streams could be reused, the msid
wasn't being updated correctly when someone left the bridge and
another joined.
Now, instead of looking for the msid attribute on a channel's streams,
app_confbridge sets an "SDP:LABEL" attribute on the stream which
res_pjsip_sdp_rtp looks for. If it finds it, it adds a "label"
attribute to the current sdp.
Change-Id: I6cbaa87fb59a2e0688d956e72d2d09e4ac20d5a5
If a conference is ended very quickly after it was created (i.e., the
first user immediately hangs up) then the conference bridge and announcer
channels are not removed.
When a conference is created, the push_announcer() function is added to
the playback queue task processor and the conference object reference is
bumped. If a conference is ended while the push_announcer() function is
still going then the ao2_cleanup(conference) at the end of
push_announcer() will call the destructor function -
destroy_conference_bridge().
The destroy_conference_bridge() function will then add the
hangup_playback() task to the playback queue and will wait for it to end.
Since it is already a current task of the playback queue it will wait
forever.
This patch makes the conference thread call push_announcer() directly.
This way the conference object reference bump is not needed. Since the
playback queue task processor is only used by the conference thread
itself, there is no danger of trying to play announcements before the
announcer is pushed to the bridge.
ASTERISK-27870 #close
Change-Id: I947a50fb121422d90fd1816d643a54d75185a477
With the participant info code in app_confbridge, we were still
in the process of adding the channel to the bridge when trying to send
an in-dialog MESSAGE. This caused 2 threads to grab the channel
blocking flag at the same time. To mitigate this, the participant
info code was moved to confbridge_manager so it runs after all
channel/bridge actions have finished.
Change-Id: I228806ac153074f45e0b35d5236166e92e132abd
Add predial handler support to app_queue. app_dial (ASTERISK_19548) and
app_originate (ASTERISK_26587) have the ability to execute predial
handlers on caller and callee channels. This patch adds predial handlers
to app_queue and uses the same options as Dial and Originate (b and B).
The caller routine gets executed when the caller first enters the queue.
The callee routine gets executed for each queue member when they are about
to be called.
ASTERISK-27912
Change-Id: I5acf5c32587ee008658d12e8a8049eb8fa4d0f24
There can be one and only one thread handling a channel's media at a time.
Otherwise, we don't know which thread is going to handle the media frames.
ASTERISK-27625
Change-Id: Ia341f1a6f4d54f2022261abec9021fe5b2eb4905
This patch changes the way asterisk polls output from mpg123, instead
of waiting for 10 seconds(when playing an http url) it now uses a
timeout of one second and iterates 10 times using this same timeout.
The main difference is that for every timeout asterisk receives it now
checks if mpg123 is still running before poll again.
ASTERISK-27752
Change-Id: Ib7df8462e3e380cb328011890ad9270d9e9b4620
ConfBridge can now send events to participants via in-dialog MESSAGEs.
All current Confbridge events are supported, such as ConfbridgeJoin,
ConfbridgeLeave, etc. In addition to those events, a new event
ConfbridgeWelcome has been added that will send a list of all
current participants to a new participant.
For all but the ConfbridgeWelcome event, the JSON message contains
information about the bridge, such as its id and name, and information
about the channel that triggered the event such as channel name,
callerid info, mute status, and the MSID labels for their audio and
video tracks. You can use the labels to correlate callerid and mute
status to specific video elements in a webrtc client.
To control this behavior, the following options have been added to
confbridge.conf:
bridge_profile/enable_events: This must be enabled on any bridge where
events are desired.
user_profile/send_events: This must be set for a user profile to send
events. Different user profiles connected to the same bridge can have
different settings. This allows admins to get events but not normal
users for instance.
user_profile/echo_events: In some cases, you might not want the user
triggering the event to get the event sent back to them. To prevent it,
set this to false.
A change was also made to res_pjsip_sdp_rtp to save the generated msid
to the stream so it can be re-used. This allows participant A's video
stream to appear as the same label to all other participants.
Change-Id: I26420aa9f101f0b2387dc9e2fd10733197f1318e
There was no real reason to limit the conteny type to text/plain other
than that's what it was limited to before. Now any text/* content
type will be allowed for channel drivers that don't support enhanced
messaging and any type will be allowed for channel drivers that do
support enhanced messaging.
Change-Id: I94a90cfee98b4bc8e22aa5c0b6afb7b862f979d9
When an AMI client connects, it cannot determine if a user was talking
prior to a transition in the user speaking state (which would generate
a ConfbridgeTalking event). This patch causes app_confbridge to track the
talking state and make this state available via ConfBridgeList.
ASTERISK-27877 #close
Change-Id: I19b5284f34966c3fda94f5b99a7e40e6b89767c6
The MeetmeJoin, MeetmeLeave, MeetmeEnd, MeetmeMute, MeetmeTalking, and
MeetmeTalkRequest AMI events were documented with sending out a Usernum
header when the User header was actually output.
* Change the online documentation to match reality.
ASTERISK-27873
ASTERISK-25261
Change-Id: I437bc70618d07c183c9624b7069c2fcae7f17a39
Fix data-type mismatch between app_voicemail and database columns
exposed by new version of MariaDB
ASTERISK-27760
Change-Id: I8543ad480a08c98be78bde1ee870e6e6c84b2c5b
Correct the log warning message shown when ODBC voicemail
retrieve_file is called and there is a null value in the category
column.
A more meaningfull message is now written at debug level.
ASTERISK-27853
Change-Id: Ic36e97d5eb070a23a12ba45972f6b53e2182a3f4
This fixes build warnings found by GCC 8. In some cases format
truncation is intentional so the warning is just suppressed.
ASTERISK-27824 #close
Change-Id: I724f146cbddba8b86619d4c4a9931ee877995c84
Use AST_PBX_MAX_STACK to escape if we recurse 128 times. This will
prevent crash if dialplan contains an include loop. Log an error when
this occurs, at most one message per call to Macro() so we avoid logger
spam.
ASTERISK-26570 #close
Change-Id: I6c71b76998c31434391b150de055ae9a531e31da
Fixes a bug on the "confbridge show profile bridge" cli command
that showed "video_mode=no video" when video_mode was set
to "sfu"
ASTERISK-27418 #close
Change-Id: I481e3172c7f872664c7ac7809879d541c9f031e9
This change adds the ability for multiple REMB reports in
bridge_softmix to be combined according to a configured
behavior into a single report. This single report is sent
back to the sender of video, which adjusts the encoding bitrate
to be at or below the bitrate of the report. The available
behaviors are: lowest, highest, and average. Lowest uses the
lowest received bitrate. Highest uses the highest received
bitrate. Average goes through the received bitrates adding
them to the previous average and creates a new average.
Other behaviors can be added in the future and the existing
average one may be adjusted, but this provides the foundation
to do so.
Support for configuring which behavior to use has been
added to app_confbridge.
ASTERISK-27804
Change-Id: I9eafe4e7c1f72d67074a8d6acb26bfcf19322b66
SendText now accepts new channel variables that can be used
to override the To and From display names and set the Content-Type
of a message. Since you can now set Content-Type, other text/*
content types are now valid.
Change-Id: I648b4574478119f95de09d9f08e9595831b02830
This change adds a configuration option to app_confbridge which can be
used to set the interval at which we will send a combined REMB (remote
estimated maximum bitrate) frame to sources of video. The bridging API
has also been extended slightly to allow setting this so bridge_softmix
can use it.
ASTERISK-27786
Change-Id: I0e49eae60f369c86434414f3cb8278709c793c82
Add an option to make app_originate not wait for the created channel
to answer.
Change-Id: I7fc2facd77079abc6321f44e8bcd4e39298de2ae
Requested-by: Frederic Steinfels <fst@highdefinition.ch>
Signed-off-by: Russell Bryant <russell@russellbryant.net>
Asterisk does not need the development package of libltdl, because it does not
use any symbol of -lltdl directly. Instead, it uses the runtime package via the
shared library -lodbc. On the supported platforms, that shared library declares
its dependency on -lltdl correctly, otherwise AST_EXT_LIB_CHECK would have
failed.
ASTERISK-27745
Change-Id: Icd315809b8e7978203431f3afb66240dd3a040ba
Certain applications (e.g. door-phone) require that also video is transmitted
before a call is accepted.
Change-Id: I9842e1dc2f6e1c2c49dc33fe615255007d2f821e
When app_voicemail calls ast_test_suite_notify with the results of
a user keypress, it formats the keypress as '%c'. If the user hung up
or some other error occurrs, the result of the keypress is a non
printable character. This ultimately causes json_vpack_ex to think
it's being passed a non utf-8 string and return an error.
* Keypress results passed to ast_test_suite_notify are now checked with
isprint() and a '?' is substituted if the check fails.
Change-Id: I78ee188916bbac840f3d03f40201b692347ea865
* acl (named_acl.c)
* cdr
* cel
* ccss
* dnsmgr
* dsp
* enum
* extconfig (config.c)
* features
* http
* indications
* logger
* manager
* plc
* sounds
* udptl
These modules are now loaded at appropriate time by the module loader.
Unlike loadable modules these use AST_MODULE_LOAD_FAILURE on error so
the module loader will abort startup on failure of these modules.
Some of these modules are still initialized or shutdown from outside the
module loader. logger.c is initialized very early and shutdown very
late, manager.c is initialized by the module loader but is shutdown by
the Asterisk core (too much uses it without holding references).
Change-Id: I371a9a45064f20026c492623ea8062d02a1ab97f
The menuselect comment was updated to deprecate these modules but the
AST_MODULE_INFO block at the end of file was missed.
ASTERISK-27671
Change-Id: I63070b5c4d4f08af010c6034acd4793c1bcef839
Checking option_debug directly is incorrect as it ignores file/module
specific debug settings. This system-wide change replaces nearly all
direct checks for option_debug with the DEBUG_ATLEAST macro.
Change-Id: Ic342d4799a945dbc40ac085ac142681094a4ebf0
astosp.h is leftover from when logic was split between app_osplookup and
res_osp. All logic was moved into app_osplookup by 109737eb1c in 2006,
but astosp.h remained. This moves the remaining defines into
app_osplookup and deletes astosp.h.
Change-Id: I0a6c4debd7c9543b608520b1765abfa4fab7b2fd
Between Asterisk 11 and Asterisk 13 there was a significant increase
in the number of AST_FRAME_NULL frames being processed by app_amd.c's
main loop. Each AST_FRAME_NULL frame was being counted as 100ms
towards the total time and silence. This may have been accurate
when app_amd.c was orginally added, but it is not in Asterisk 13.
As such the total analysis time and silence calculations were way
off effectively breaking app_amd.c
* Additional debug messages were added
* AST_FRAME_NULL are now ignored
ASTERISK-27610
Change-Id: I18aca01af98f87c1e168e6ae0d85c136d1df5ea9
* app_fax (replaced by res_fax).
* res_config_sqlite (replaced by res_config_sqlite3).
* res_monitor (replaced by app_mixmonitor).
This is related to ASTERISK~23657 but does not resolve that ticket.
Resolving that ticket would require complete removal of res_monitor.
ASTERISK-27671 #close
Change-Id: I16a3edd61fc1abd4a7b2e9357693ed663f62dd49
* Made the AMI ConfbridgeList action's ConfbridgeList events output all
the standard channel snapshot headers instead of a few hand-coded channel
snapshot headers. The benefit is that the CallerIDName gets disruptive
characters like CR, LF, Tab, and a few others escaped. However, an empty
CallerIDName is now output as "<unknown>" instead of "<no name>".
ASTERISK-27651
Change-Id: Iaf7d54a9d40194c2db060bc9b4979fab6720d977
The dsp_talking_threshold does not represent time in milliseconds. It
represents the average magnitude per sample in the audio packets. This is
what the DSP uses to determine if a packet is silence or talking/noise.
Change-Id: If6f939c100eb92a5ac6c21236559018eeaf58443
This removes references that are no longer needed due to automatic
references created by module dependencies.
In addition this removes most calls to ast_module_check as they were
checking modules which are listed as dependencies.
Change-Id: I332a6e8383d4c72c8e89d988a184ab8320c4872e
I've audited all modules that include any header which includes
asterisk/optional_api.h. All modules which use OPTIONAL_API now declare
those dependencies in AST_MODULE_INFO using requires or optional_modules
as appropriate.
In addition ARI dependency declarations have been reworked. Instead of
declaring additional required modules in res/ari/resource_*.c we now add
them to an optional array "requiresModules" in api-docs for each module.
This allows the AST_MODULE_INFO dependencies to include those missing
modules.
Change-Id: Ia0c70571f5566784f63605e78e1ceccb4f79c606
This patch adds the ability to configure a prompt which will be read
to the "winner" who pressed 1 (or the configured value) and received
the call.
ASTERISK-24372 #close
Change-Id: I6ec1c6c883347f7d1e1f597189544993c8d65272
* Declare 'requires' and 'enhances' text fields on module info structure.
* Rename 'nonoptreq' to 'optional_modules'.
* Update doxygen comments.
Still need to investigate dependencies among modules I cannot compile.
Change-Id: I3ad9547a0a6442409ff4e352a6d897bef2cc04bf
The check for last_user == NULL needs to happen before we dereference
the variable, previously it was possible for us to check flags of a NULL
last_user.
Change-Id: I274f737aa8af9d2d53e4a78cdd7ad57561003945
Fix instances of:
* Retreive
* Recieve
* other then
* different then
* Repeated words ("the the", "an an", "and and", etc).
* othterwise, teh
ASTERISK-24198 #close
Change-Id: I3809a9c113b92fd9d0d9f9bac98e9c66dc8b2d31
* mwi_sub_event_cb: mwist leaked on separate_mailbox failure.
* add_email_attachment: A reference to sox_gain_tmpdir was used
after the storage was out of scope.
Change-Id: I6282c542ff7b82fa091177a912d11234a8b00a30
This patch adds the ability to set the wrapuptime on the queue member
config.
When the option is set the wrapuptime on the queue member is used instead
of the queue's wrapuptime.
ASTERISK-27483 #close
Change-Id: I11c85809537f974eb44dc5bbf82bcedd8a458902
The Local channel has never supported app_transfer
from what I can see so remove it from the documentation.
ASTERISK-25649
Change-Id: Icbcfe297f6f866285a26b3e9fd5c6d00fa22e0e9
Remove nearly all use of regex from ACO users. Still remaining:
* app_confbridge has a legitamate use of option name regex.
* ast_sorcery_object_fields_register is implemented with regex, all
callers use simple prefix based regex. I haven't decided the best
way to fix this in both 13/15 and master.
Change-Id: Ib5ed478218d8a661ace4d2eaaea98b59a897974b
Currently, to figure out specified voicemail's status, there's only one
way to do it, which is use a VoicemailUserEntry AMI message.
But it consumed it too much resource(it check everything).
So, added new AMI action.
ASTERISK-27470
Change-Id: Ie4eba1424a142e5fbd1d9fb1821a3fc1a1e238b7
The approach with having a single global subscription to all extension
state changes has one issue: dynamically created hints don't have any
watchers and are therefore garbage collected on the first dialplan
reload.
This change creates a state subscription for every queue member with a
hint as state_interface, thus increasing the count of watches for
hints, so they are not destroyed prematurely anymore.
There are 2 side effects:
1. The state change callback in app_queue is not executed when
there are no members referring to the extension.
2. The callback is called multiple times for the same hint if it's
associated with more than one queue member.
Reported by: Steven T. Wheeler
ASTERISK-18411 #close
Change-Id: I4956af2136ea2a7f110ac9272eae5f6e676d8f89
There are many places in the code base where we ignore the return value
of fcntl() when getting/setting file descriptior flags. This patch
introduces a convenience function that allows setting or clearing file
descriptor flags and will also log an error on failure for later
analysis.
Change-Id: I8b81901e1b1bd537ca632567cdb408931c6eded7
Currently, when the app_voicemail sending VoicemailUserEntry AMI event, there's
no OldMessageCount info for default.
To check the OldMessageCount info, it required IMAP_STORAGE define, but this is
not correct.
Added OldMessageCount item as a default.
ASTERISK-27456
Change-Id: I5c71521c2d1daf8b7b161e31c34d28cca6aea4c7
Instead of specifying AST_MODFLAG_LOAD_ORDER with load_pri
AST_MODPRI_DEFAULT just use AST_MODFLAG_DEFAULT.
Change-Id: I0123258eafce324249433a69df15a85cc16e509f
Declare 'res' initialized to -1 to deal with earlier error paths that
could cause 'res' to be returned uninitialized.
Change-Id: I8ac2a5755bf4174d89ef893e924c940f702b104e
We've been calling pbx_builtin_setvar_helper to set the
RECORD_STATUS variable before actually closing the recorded file.
If a client is watching VarSet events and tries to do something with
the file when a RECORD_STATUS event is seen, they might attempt to
do so while the file it's still open.
We now delay calling pbx_builtin_setvar_helper until after we close
the file.
ASTERISK-27423
Change-Id: I7fe9de99953e46b4bafa2b38cf151fe8f6488254
When (v)asprintf() fails, the state of the allocated buffer is undefined.
The library had better not leave an allocated buffer as a result or no one
will know to free it. The most likely way it can return failure is for an
allocation failure. If the printf conversion fails then you actually have
a threading problem which is much worse because another thread modified
the parameter values.
* Made __ast_asprintf()/__ast_vasprintf() set the returned buffer to NULL
on failure. That is much more useful than either an uninitialized pointer
or a pointer that has already been freed. Many uses won't have to check
for failure to ensure that the buffer won't be double freed or prevent an
attempt to free an uninitialized pointer.
* stasis.c: Fixed memory leak in multi_object_blob_to_ami() allocated by
ast_asprintf().
* ari/resource_bridges.c:ari_bridges_play_helper(): Remove assignment to
the wrong thing which is now not needed even if assigning to the right
thing.
Change-Id: Ib5252fb8850ecf0f78ed0ee2ca0796bda7e91c23
* Stop using ast_module_helper to check if a module is loaded, use
ast_module_check instead (app_confbridge and app_meetme).
* Stop ast_module_helper from listing reload classes when needsreload
was not requested.
ASTERISK-27378
Change-Id: Iaed8c1e4fcbeb242921dbac7929a0fe75ff4b239
Fix typo, that specify usage wrong option 'dtmf-features' for CHANNEL() function
instead of correct 'dtmf_features'
ASTERISK-27377 #close
Change-Id: I15ecc829c1035b359584673e12cdb5c9291ac930
* Mark the module deprecated.
* Disable the module by default.
* Produce a warning the first time a macro is used.
* Note deprecation related options in app_dial and app_queue.
ASTERISK-27350
Change-Id: I560ea043bacdbc5534a17d97854273d52c2f1bdc
We were ignoring the return value from ast_pbx_outgoing_exten() and
ast_pbx_outgoing_app() which could fail before setting the reason code.
This resulted in failures being reported as success.
ASTERISK-25266 #close
Reported by: Allen Ford
Change-Id: Idf16237b7e41b527d2c69c865829128686beeb3b
The previous patch for ASTERISK-27216 made it so you wouldn't get any
position or periodic announcements unless you had announce-to-first-user
enabled. The announce-to-first-user feature was added by ASTERISK_21782
as a result of the patch which introduced the redundant announcements that
ASTERISK-27216 removes.
* By noting that the makeannouncement variable is used to suppresses the
first user announcement, we set its initial value to the
announce-to-first-user enable setting.
ASTERISK-27216
Change-Id: Ieaeb7dbea8ae7073086b775fbafe0625b000b10a
This patch reverts the change by patch 2263 from old reviewboard.
Note that reverting that 2263-patch still preserves the behaviour that
the commit log of the 2263-patch claimed to add. The reason for this is:
The function wait_for_answer is only called from try_calling which
in turn is only called from the main for loop in queue_exec, and
earlier in that loop we already check the things that's removed by
this patch. There's no need to check those things twice each loop
iteration, and I think the proper place to check it is before each
ringing cycle. By checking it in wait_for_answer, you allow the issue
explained in the jira - that the head caller hears announcements while
the agents' sip phones are actively ringing.
Reported-by: Stefan Engström
Tested-by: Stefan Engström
ASTERISK-27216 #close
Change-Id: Ic4290dc75256f9743900c6762ee1bb915f672db0
Discovered while experimenting with Cyber Mega Phone 2K Ultimate Dynamic
Edition after accepting the audio request but declining the video one.
Change-Id: Iaa86d41fccfbc1b559a30ccf740d78a3b5f8a98c
This change makes it so that the conference recorder channel
that is created only contains audio formats and an audio stream.
This is because the underlying application used by ConfBridge to
record, MixMonitor, only allows recording audio.
Having additional streams (and in particular a video stream) can
result in clients needlessly renegotiating to add a video stream
that will never receive video.
Change-Id: I89d38aedc9205eca7741d5435e73e73bb9de97a0
* WaitForSilence completes successfully if it receives no media in the
specified timeout, but when acting as WaitForNoise that logic needs
to be reversed.
* Use standard argument parsing macros and add some error checking for
invalid values.
* The documentation indicated that the first argument to both
WaitForSilence and WaitForNoise was required when it was not. Update
the documentation to reflect that.
* Wrap up some behavior in structs to avoid boolean checks all over the
place.
ASTERISK-24066 #close
Reported by: M vd S
Change-Id: I01d40adc5b63342bb5018a1bea2081a0aa191ef9
An admin can configure app_minivm with an externnotify program to be run
when a voicemail is received. The app_minivm application MinivmNotify
uses ast_safe_system() for this purpose which is vulnerable to command
injection since the Caller-ID name and number values given to externnotify
can come from an external untrusted source.
* Add ast_safe_execvp() function. This gives modules the ability to run
external commands with greater safety compared to ast_safe_system().
Specifically when some parameters are filled by untrusted sources the new
function does not allow malicious input to break argument encoding. This
may be of particular concern where CALLERID(name) or CALLERID(num) may be
used as a parameter to a script run by ast_safe_system() which could
potentially allow arbitrary command execution.
* Changed app_minivm.c:run_externnotify() to use the new ast_safe_execvp()
instead of ast_safe_system() to avoid command injection.
* Document code injection potential from untrusted data sources for other
shell commands that are under user control.
ASTERISK-27103
Change-Id: I7552472247a84cde24e1358aaf64af160107aef1
This prevents orphaned CBAnn channels from getting stuck in the bridge.
ASTERISK-26994 #close
Reported by: James Terhune
Change-Id: I5e43e832a9507ec3f2c59752cd900b41dab80457
mkstemp() returns a unique filename, but appending an extension to that
filename does not guarantee uniqueness. Instead, use mkdtemp() and we
can put whatever extension we want on the files that we create inside
the directory.
In the case of app_minivm, we also now properly clean up any temporary
files that we create.
ASTERISK-20858 #close
Reported by: Walter Doekes
Change-Id: I30ad04f0e115f0b11693ff678ba5184d8b938e43
If the Record() application is called with a relative filename that
includes directories, we were not properly creating the intermediate
directories and Record() would fail.
Secondarily, updated the documentation for RECORDED_FILE to mention
that it does not include a filename extension.
Finally, rewrote the '%d' functionality to be a bit more straight
forward and less noisy.
ASTERISK-16777 #close
Reported by: klaus3000
Change-Id: Ibc2640cba3a8c7f17d97b02f76b7608b1e7ffde2
Fixed to use correct initial value and fixed to use the
correct queue info to check the first value.
ASTERISK-27204
Change-Id: Ia9e36c828e566e1cc25c66f73307566e4acb8e73
GCC 7 has added capability to produce warnings, this fixes most of those
warnings. The specific warnings are disabled in a few places:
* app_voicemail.c: truncation of paths more than 4096 chars in many places.
* chan_mgcp.c: callid truncated to 80 chars.
* cdr.c: two userfields are combined to cdr copy, fix would break ABI.
* tcptls.c: ignore use of deprecated method SSLv3_client_method().
ASTERISK-27156 #close
Change-Id: I65f280e7d3cfad279d16f41823a4d6fddcbc4c88
Setting this option will cause the Queue application to only announce
the caller's position if it has improved since the last time that we
announced it.
Change-Id: I173a124121422209485b043e2bf784f54242fce6
The following testsuite voicemail tests were failing to re-enter the
mailbox after the first login attempt.
tests/apps/voicemail/authenticate_invalid_mailbox
tests/apps/voicemail/authenticate_invalid_password
The tests were noting the start of the vm-incorrect-mailbox prompt and
immediately sending the mailbox for the next login attempt. Since the
invalid message playback had to complete before the digits were
recognized, the test passed for the wrong reason and added approximately
20 seconds to the test times.
* Allow the vm-incorrect-mailbox prompt to get interrupted by the mailbox
digits like the initial vm-login prompt so the tests are able to enter the
intended mailbox.
Change-Id: I1dc53fe917bfe03a4587b2c4cd24c94696a69df8
This change does a few things to improve packet loss and renegotiation:
1. On outgoing RTP streams we will now properly reflect out of order
packets and packet loss in the sequence number. This allows the
remote jitterbuffer to better reorder things.
2. Video updates can now be discarded for a period of time
after one has been sent to prevent flooding of clients.
3. For declined and removed streams we will now release any
media session resources associated with them. This was not
previously done and caused an issue where old state was being
used for a new stream.
4. RTP bundling was not actually removing bundled RTP instances
from the parent. This has been resolved by removing based on
the RTP instance itself and not the SSRC.
5. The code did not properly handle explicitly unbundling an
RTP instance from its parent. This now works as expected.
ASTERISK-27143
Change-Id: Ibd91362f0e4990b6129638e712bc8adf0899fd45
This commit fixes two possible scenarios:
* When recording name and if during recording you hangup, file is never
removed. This is due to the fact file location is nulled.
* When recording name and if you hangup during thank-you prompt, file
is never removed.
ASTERISK-27123 #close
Change-Id: I39b7271408b4b54ce880c5111a886aa8f28c2625
In say_date_generic the timezonename parameter is passed but never
used. Fix it by passing it to the ast_localtime function.
ASTERISK-27124
Change-Id: I63106b8db10426d417d7275f22554a616e92fae4
When performing the "Queues" action via AMI, it outputs the same
text that the Asterisk CLI outputs when running a "queue show"
command, which does not conform with the AMI spec. "QueueStatus"
already does what the "Queues" action should do, so instead of
correcting the output, the "Queues" action will be removed and
"QueueStatus" should be used instead.
ASTERISK-27073 #close
Reported by: Brian
Change-Id: Id11743859758255b69cc3a557750d7a56c6d16f8
This API was not actively maintained, was not added to new modules
(such as res_pjsip), and there exist better alternatives to acquire the
same information, such as the ARI.
Change-Id: I4b2185a83aeb74798b4ad43ff8f89f971096aa83
The primary focus of this patch is adding a missing call to
ast_odbc_release_obj(), but is also a general cleanup of the ODBC
related code in app_voicemail.
ASTERISK-27093 #close
Change-Id: I8e285142eaeb3146b4287a928276b70db76c902b
Fixed the following bugs:
* calls to stream_echo_write had the last two parameters swapped
* ast_read should have been ast_read_stream
* added a null check on the frame's subclass format
This also resets the update_sent flag upon receiving SRRCHANGE control frame.
This will then force a video update.
ASTERISK-26997
Change-Id: I6ad7c8253559b800800433c52339e7f5aa583566
The fix for ASTERISK-25665 introduced a regression.
The return value of queue_exec used to be 0 in case of leavewhenempty
but it was changed to -1 (returned from wait_our_turn and passed
transparently by queue_exec), thus leading to hangup instead of returning
back to dialplan.
This commit resets the value back to 0 in this case, restoring
original behavior.
ASTERISK-27065 #close
Reported by: Marek Cervenka
Change-Id: Id9c83b75aeda463250155e88c5004be52bbca5ac
A new global option "imap_poll_logout" was added to specify whether need to
disconnect from the IMAP server after polling of mailboxes.
ASTERISK-27068 #close
Closing IMAP connection after loading mailbox from voicemail.conf
ASTERISK-24052 #close
Change-Id: Ib7558ba04516240a32b65f42e9be64372a0ae12a
A previous commit added plumbing to bridge_softmix to allow for an SFU
experience with Asterisk. This commit adds an option to app_confbridge
that allows for a confbridge to actually make use of the SFU video mode.
SFU mode is implemented in a "set it and forget it" kind of way. That
is, when the bridge is created, if SFU mode is enabled, then the video
mode gets set to SFU and cannot be changed. Future improvements may
allow for a hybrid experience (e.g. forward multiple video streams,
specifically those of the most recent talkers), but for this addition,
no such capability is present.
Change-Id: I87bbcb63dec6dbbb42488f894871b86f112b2020
This sets up the "plumbing" in bridge_softmix to
be able to accommodate Asterisk asking as an SFU
(selective forwarding unit) for conferences.
The way this works is that whenever a channel enters or leaves a
conference, all participants in the bridge get sent a stream topology
change request. The topologies consist of the channels' original
topology, along with video destination streams corresponding to each
participants' source video streams. So for instance, if Alice, Bob, and
Carol are in the conference, and each supplies one video stream, then
the topologies for each would look like so:
Alice:
Audio,
Source video(Alice),
Destination Video(Bob),
Destination video (Carol)
Bob:
Audio,
Source video(Bob)
Destination Video(Alice),
Destination video (Carol)
Carol:
Audio,
Source video(Carol)
Destination Video(Alice),
Destination video (Bob)
This way, video that arrives from a source video stream can then be
copied out to the destination video streams on the other participants'
channels.
Once the bridge gets told that a topology on a channel has changed, the
bridge constructs a map in order to get the video frames routed to the
proper destination streams. This is done using the bridge channel's
stream_map.
This change is bare-bones with regards to SFU support. Some key features
are missing at this point:
* Stream limits. This commit makes no effort to limit the number of
streams on a specific channel. This means that if there were 50 video
callers in a conference, bridge_softmix will happily send out topology
change requests to every channel in the bridge, requesting 50+
streams.
* Configuration. The plumbing has been added to bridge_softmix, but
there has been nothing added as of yet to app_confbridge to enable SFU
video mode.
* Testing. Some functions included here have unit tests.
However, the functionality as a whole has only been verified by
hand-tracing the code.
* Selectivenss. For a "selective" forwarding unit, this does not
currently have any means of being selective.
* Features. Presumably, someone might wish to only receive video from
specific sources. There are no external-facing functions at the moment
that allow for users to select who they receive video from.
* Efficiency. The current scheme treats all video streams as being
unidirectional. We could be re-using a source video stream as a
desetnation, too. But to simplify things on this first round, I did it
this way.
Change-Id: I7c44a829cc63acf8b596a337b2dc3c13898a6c4d
A change was done which added an 'in_call' flag to queue
members that was set to true while talking to an agent.
Unfortunately in practice this does not accurately reflect
whether they are talking to an agent or not. If a Local
channel is involved and a transfer is performed then the
app_queue application would incorrectly think the agent
was still in a call with the caller. This was done to
fix a race condition between an agent becoming available
by device state and the checking of the last call information
for the wrapup time. There was a small window where the
last call information would be the previous value instead
of the new one.
This change goes about fixing the original issue in a
different way by considering the call completed if device
state is received which would make the agent available
and if they are currently in a call. If this occurs the
last call information is updated before the agent becomes
available ensuring that old information is not present
when checking if the member should be called. This also
improves the transfer situation by actually updating
and enforcing the wrapup time.
ASTERISK-26399
ASTERISK-26400
ASTERISK-26715
ASTERISK-26975
Change-Id: Ife1cb686e3173b3a6d368601adef9aff69d4beea
When user leaves a conference, its channel calls async_play_sound_file()
in order to play the name announcement and then unlinks the sound file.
The async_play_sound_file() function adds a task to conference playback queue,
which then runs playback_common() function in a different thread.
It leads to a race condition when, in some cases, channel thread may unlink
the sound file before playback_common() had a chance to open it.
This patch creates a file deletion task, that is queued after playback.
ASTERISK-27012 #close
Change-Id: I412f7922d412004b80917d4e892546c15bd70dd3
Additional variable to work alongside QUEUE_MAX_PENALTY and QUEUE_MIN_PENALTY,
including an extra parameter in queuerules.conf. This value causes lower
Agent penalty values to "raise up" so that they can join higher penalty agents
and be treated equally after a period of time.
ASTERISK-26995 #close
Change-Id: If1c6421a983667a5ac4c359f6dac25b212b4c459
George Joseph
Friendly Automation
Joshua Colp
Richard Mudgett
Frederic LE FOLL
Walter Doekes
Michael Cargile
lvl
Kevin Harwell
cmaj
Sean Bright
Corey Farrell
Alexei Gradinari
Chris-Savinovich
Nasir Iqbal
Joshua Colp
agupta
Rodrigo Ramírez Norambuena
Antoni Goldstein
Dömsödi Gergely
Bryan Boatright
Cao Minh Hiep
Ivan Poddubny
Robert Mordec
Kristian F. Høgh
Sam Wierema
William McCall
Nic Colledge
Russell Bryant
Alexander Traud
Florian Floimair
Sungtae Kim
ghjm
Igor Goncharovskiy
Nathan Bruning
StefanEng86
Sergej Kasumovic
Holger Hans Peter Freyther
Benjamin Keith Ford
Niklas Larsson
Mark Michelson
Steve Davies