372 Commits (d348c9aa1ea5771b51ad9883420cb41a1fc27b3e)

Author	SHA1	Message	Date
Richard Mudgett	816f26c16c	Generate a correct AstData string for ast_callerid.cid_ton ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@274782 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Richard Mudgett	25a3c313b5	Fix trunk compile. ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@274773 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Eliel C. Sardanons	a1b89a6a50	Implement AstData API data providers as part of the GSOC 2010 project, ... midterm evaluation. Review: https://reviewboard.asterisk.org/r/757/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@274727 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
David Vossel	b00f58da25	adds speex 16khz audio support ... (closes issue #17501) Reported by: fabled Patches: asterisk-trunk-speex-wideband-v2.patch uploaded by fabled (license 448) Tested by: malcolmd, fabled, dvossel git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@271231 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
David Vossel	fcb055fb4e	addition of G.719 pass-through support ... (closes issue #16293) Reported by: malcolmd Patches: g719.passthrough.patch.7 uploaded by malcolmd (license 924) format_g719.c uploaded by malcolmd (license 924) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@270940 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Mark Michelson	e8d2153da6	Merged revisions 269821 via svnmerge from ... https://origsvn.digium.com/svn/asterisk/branches/1.4 ........ r269821 | mmichelson | 2010-06-10 14:30:12 -0500 (Thu, 10 Jun 2010) | 19 lines Fix potential crash when writing raw SLIN audio on a PLC-enabled channel. The issue here was that the frame created when adjusting for PLC had no offset to its audio data. If this frame were translated to another format prior to being sent out an RTP socket, all went well because the translation code would put an appropriate offset into the frame. However, if the SLIN audio were not translated before being sent out the RTP socket, bad things would happen. Specifically, the ast_rtp_raw_write makes the assumption that the frame has at least enough of an offset that it can accommodate an RTP header. This was not the case. As such, data was being written prior to the allocation, likely corrupting the data the memory allocator had written. Thus when the time came to free the data, all hell broke loose. ....Well, Asterisk crashed at least. The fix was just what one would expect. Offset the data in the frame by a reasonable amount. The method I used is a bit odd since the data in the frame is 16 bit integers and not bytes. I left a big ol' comment about it. This can be improved on if someone is interested. I was more interested in getting the crash resolved. ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@269822 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Terry Wilson	857814f435	Add SRTP support for Asterisk ... After 5 years in mantis and over a year on reviewboard, SRTP support is finally being comitted. This includes generic CHANNEL dialplan functions that work for getting the status of whether a call has secure media or signaling as defined by the underlying channel technology and for setting whether or not a new channel being bridged to a calling channel should have secure signaling or media. See doc/tex/secure-calls.tex for examples. Original patch by mikma, updated for trunk and revised by me. (closes issue #5413) Reported by: mikma Tested by: twilson, notthematrix, hemanshurpatel Review: https://reviewboard.asterisk.org/r/191/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@268894 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Richard Mudgett	0760f4e70a	Add ETSI Malicious Call ID support. ... Add the ability to report malicious callers as an AMI event in the call event class. Relevant specification: EN 300 180 Review: https://reviewboard.asterisk.org/r/576/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@267350 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Richard Mudgett	afd4454c44	Generic Advice of Charge. ... Asterisk Generic AOC Representation - Generic AOC encode/decode routines. (Generic AOC must be encoded to be passed on the wire in the AST_CONTROL_AOC frame) - AST_CONTROL_AOC frame type to represent generic encoded AOC data - Manager events for AOC-S, AOC-D, and AOC-E messages Asterisk App Support - app_dial AOC-S pass-through support on call setup - app_queue AOC-S pass-through support on call setup AOC Unit Tests - AOC Unit Tests for encode/decode routines - AOC Unit Test for manager event representation. SIP AOC Support - Pass-through of generic AOC-D and AOC-E messages to snom phones via the snom AOC specification. - Creation of chan_sip page3 flags for the addition of the new 'snom_aoc_enabled' sip.conf option. IAX AOC Support - Natively supports AOC pass-through through the use of the new AST_CONTROL_AOC frame type DAHDI AOC Support - ETSI PRI full AOC Pass-through support - 'aoc_enable' chan_dahdi.conf option for independently enabling pass-through of AOC-S, AOC-D, AOC-E. - 'aoce_delayhangup' option for retrieving AOC-E on disconnect. - DAHDI A() dial string option for requesting AOC services. example usage: ;requests AOC-S, AOC-D, and AOC-E on call setup exten=>1111,1,Dial(DAHDI/g1/1112/A(s,d,e)) Review: https://reviewboard.asterisk.org/r/552/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@267096 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Mark Michelson	8999372c33	Fix misspelling of macro args. ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@266092 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Richard Mudgett	838ce15e20	Memory leak in connected line data when SIP blond transfer done. ... The handling of the control subclass AST_CONTROL_READ_ACTION frame leaked connected line string memory in __ast_read(). Also in __ast_read() the frame type switch should not have had a case for AST_CONTROL_READ_ACTION. AST_CONTROL_READ_ACTION is not a frame type. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@265608 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
David Vossel	fdb698ca2b	fixes segfault when using generic plc ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@265273 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Richard Mudgett	ba8e183938	Channel initialization failure causes crashes. ... __ast_channel_alloc_ap() has several points in the initialization of a new channel structure where it could fail. Since the channel structure is now an ao2 object, the destructor callback needs to be able to handle clean up when the structure setup is incomplete. Problems corrected: 1) Failing to setup the alertpipe would not unreference the structure but free it directly. Doing this to an ao2_object is very bad. 2) File descriptors need to be initialized to -1 before a construction failure could occur so the destructor will not close unopened descriptors. 3) The destructor needs to check that the string field has been initialized before using any string field values. Crashes expected. 4) The destructor should not notify devstate if the device name is empty. It is a waste of cycles and a couple ERROR log messages are generated. Review: https://reviewboard.asterisk.org/r/675/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@265174 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Mark Michelson	73e8c7572e	Merged revisions 264996 via svnmerge from ... https://origsvn.digium.com/svn/asterisk/branches/1.4 ........ r264996 | mmichelson | 2010-05-21 11:28:34 -0500 (Fri, 21 May 2010) | 32 lines Allow ast_safe_sleep to defer specific frames until after the sleep has concluded. From reviewboard Background: A Digium customer discovered a somewhat odd bug. The setup is that parties A and B are bridged, and party A places party B on hold. While party B is listening to hold music, he mashes a bunch of DTMF. Party A takes party B off hold while this is happening, but party B continues to hear hold music. I could reproduce this about 1 in 5 times. The issue: When DTMF features are enabled and a user presses keys, the channel that the DTMF is streamed to is placed in an ast_safe_sleep for 100 ms, the duration of the emulated tone. If an AST_CONTROL_UNHOLD frame is read from the channel during the sleep, the frame is dropped. Thus the unhold indication is never made to the channel that was originally placed on hold. The fix: Originally, I discussed with Kevin possible ways of fixing the specific problem reported. However, we determined that the same type of problem could happen in other situations where ast_safe_sleep() is used. Using autoservice as a model, I modified ast_safe_sleep_conditional() to defer specific frame types so they can be re-queued once the sleep has finished. I made a common function for determining if a frame should be deferred so that there are not two identical switch blocks to maintain. Review: https://reviewboard.asterisk.org/r/674/ ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@264997 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Mark Michelson	6bb45831eb	Fix transcode_via_sln option with SIP calls and improve PLC usage. ... From reviewboard: The problem here is a bit complex, so try to bear with me... It was noticed by a Digium customer that generic PLC (as configured in codecs.conf) did not appear to actually be having any sort of benefit when packet loss was introduced on an RTP stream. I reproduced this issue myself by streaming a file across an RTP stream and dropping approx. 5% of the RTP packets. I saw no real difference between when PLC was enabled or disabled when using wireshark to analyze the RTP streams. After analyzing what was going on, it became clear that one of the problems faced was that when running my tests, the translation paths were being set up in such a way that PLC could not possibly work as expected. To illustrate, if packets are lost on channel A's read stream, then we expect that PLC will be applied to channel B's write stream. The problem is that generic PLC can only be done when there is a translation path that moves from some codec to SLINEAR. When I would run my tests, I found that every single time, read and write translation paths would be set up on channel A instead of channel B. There appeared to be no real way to predict which channel the translation paths would be set up on. This is where Kevin swooped in to let me know about the transcode_via_sln option in asterisk.conf. It is supposed to work by placing a read translation path on both channels from the channel's rawreadformat to SLINEAR. It also will place a write translation path on both channels from SLINEAR to the channel's rawwriteformat. Using this option allows one to predictably set up translation paths on all channels. There are two problems with this, though. First and foremost, the transcode_via_sln option did not appear to be working properly when I was placing a SIP call between two endpoints which did not share any common formats. Second, even if this option were to work, for PLC to be applied, there had to be a write translation path that would go from some format to SLINEAR. It would not work properly if the starting format of translation was SLINEAR. The one-line change presented in this review request in chan_sip.c fixed the first issue for me. The problem was that in sip_request_call, the jointcapability of the outbound channel was being set to the format passed to sip_request_call. This is nativeformats of the inbound channel. Because of this, when ast_channel_make_compatible was called by app_dial, both channels already had compatibly read and write formats. Thus, no translation path was set up at the time. My change is to set the jointcapability of the sip_pvt created during sip_request_call to the intersection of the inbound channel's nativeformats and the configured peer capability that we determined during the earlier call to create_addr. Doing this got the translation paths set up as expected when using transcode_via_sln. The changes presented in channel.c fixed the second issue for me. First and foremost, when Asterisk is started, we'll read codecs.conf to see the value of the genericplc option. If this option is set, and ast_write is called for a frame with no data, then we will attempt to fill in the missing samples for the frame. The implementation uses a channel datastore for maintaining the PLC state and for creating a buffer to store PLC samples in. Even when we receive a frame with data, we'll call plc_rx so that the PLC state will have knowledge of the previous voice frame, which it can use as a basis for when it comes time to actually do a PLC fill-in. So, reviewers, now I ask for your help. First off, there's the one line change in chan_sip that I have put in. Is it right? By my logic it seems correct, but I'm sure someone can tell me why it is not going to work. This is probably the change I'm least concerned about, though. What concerns me much more is the set of changes in channel.c. First off, am I even doing it right? When I run tests, I can clearly see that when PLC is activated, I see a significant increase in RTP traffic where I would expect it to be. However, in my humble opinion, the audio sounds kind of crappy whenever the PLC fill-in is done. It sounds worse to me than when no PLC is used at all. I need someone to review the logic I have used to be sure that I'm not misusing anything. As far as I can see my pointer arithmetic is correct, and my use of AST_FRIENDLY_OFFSET should be correct as well, but I'm sure someone can point out somewhere where I've done something incorrectly. As I was writing this review request up, I decided to give the code a test run under valgrind, and I find that for some reason, calls to plc_rx are causing some invalid reads. Apparently I'm reading past the end of a buffer somehow. I'll have to dig around a bit to see why that is the case. If it's obvious to someone reviewing, speak up! Finally, I have one other proposal that is not reflected in my code review. Since without transcode_via_sln set, one cannot predict or control where a translation path will be up, it seems to me that the current practice of using PLC only when transcoding to SLINEAR is not useful. I recommend that once it has been determined that the method used in this code review is correct and works as expected, then the code in translate.c that invokes PLC should be removed. Review: https://reviewboard.asterisk.org/r/622/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@264452 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Mark Michelson	b5d5cc565f	Enhancements to connected line and redirecting work. ... From reviewboard: Digium has a commercial customer who has made extensive use of the connected party and redirecting information present in later versions of Asterisk Business Edition and which is to be in the upcoming 1.8 release. Through their use of the feature, new problems and solutions have come about. This patch adds several enhancements to maximize usage of the connected party and redirecting information functionality. First, Asterisk trunk already had connected line interception macros. These macros allow you to manipulate connected line information before it was sent out to its target. This patch adds the same feature except for redirecting information instead. Second, the ast_callerid and ast_party_id structures have been enhanced to provide a "tag." This tag can be set with func_callerid, func_connectedline, func_redirecting, and in the case of DAHDI, mISDN, and SIP channels, can be set in a configuration file. The idea behind the callerid tag is that it can be set to whatever value the administrator likes. Later, when running connected line and redirecting macros, the admin can read the tag off the appropriate structure to determine what action to take. You can think of this sort of like a channel variable, except that instead of having the variable associated with a channel, the variable is associated with a specific identity within Asterisk. Third, app_dial has two new options, s and u. The s option lets a dialplan writer force a specific caller ID tag to be placed on the outgoing channel. The u option allows the dialplan writer to force a specific calling presentation value on the outgoing channel. Fourth, there is a new control frame subclass called AST_CONTROL_READ_ACTION added. This was added to correct a very specific situation. In the case of SIP semi-attended (blond) transfers, the party being transferred would not have the opportunity to run a connected line interception macro to possibly alter the transfer target's connected line information. The issue here was that during a blond transfer, the SIP transfer code has no bridged channel on which to queue the connected line update. The way this was corrected was to add this new control frame subclass. Now, we queue an AST_CONTROL_READ_ACTION frame on the channel on which the connected line interception macro should be run. When ast_read is called to read the frame, ast_read responds by calling a callback function associated with the specific read action the control frame describes. In this case, the action taken is to run the connected line interception macro on the transferee's channel. Review: https://reviewboard.asterisk.org/r/652/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@263541 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Tilghman Lesher	6a0ea1d79e	Merged revisions 261093-261094 via svnmerge from ... https://origsvn.digium.com/svn/asterisk/branches/1.4 ........ r261093 | tilghman | 2010-05-04 18:36:53 -0500 (Tue, 04 May 2010) | 7 lines Protect against overflow, when calculating how long to wait for a frame. (closes issue #17128) Reported by: under Patches: d.diff uploaded by under (license 914) ........ r261094 | tilghman | 2010-05-04 18:47:08 -0500 (Tue, 04 May 2010) | 2 lines Add a tiny corner case to the previous commit ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@261095 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
David Vossel	6722251986	Merged revisions 259858 via svnmerge from ... https://origsvn.digium.com/svn/asterisk/branches/1.4 ........ r259858 | dvossel | 2010-04-28 16:16:03 -0500 (Wed, 28 Apr 2010) | 33 lines resolves deadlocks in chan_local Issue_1. In the local_hangup() 3 locks must be held at the same time... pvt, pvt->chan, and pvt->owner. Proper deadlock avoidance is done when the channel to hangup is the outbound chan_local channel, but when it is not the outbound channel we have an issue... We attempt to do deadlock avoidance only on the tech pvt, when both the tech pvt and the pvt->owner are locked coming into that loop. By never giving up the pvt->owner channel deadlock avoidance is not entirely possible. This patch resolves that by doing deadlock avoidance on both the pvt->owner and the pvt when trying to get the pvt->chan lock. Issue_2. ast_prod() is used in ast_activate_generator() to queue a frame on the channel and make the channel's read function get called. This function is used in ast_activate_generator() while the channel is locked, which mean's the channel will have a lock both from the generator code and the frame_queue code by the time it gets to chan_local.c's local_queue_frame code... local_queue_frame contains some of the same crazy deadlock avoidance that local_hangup requires, and this recursive lock prevents that deadlock avoidance from happening correctly. This patch removes ast_prod() from the channel lock so only one lock is held during the local_queue_frame function. (closes issue #17185) Reported by: schmoozecom Patches: issue_17185_v1.diff uploaded by dvossel (license 671) issue_17185_v2.diff uploaded by dvossel (license 671) Tested by: schmoozecom, GameGamer43 Review: https://reviewboard.asterisk.org/r/631/ ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@259870 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Mark Michelson	af6690ba7f	Merged revisions 259104 via svnmerge from ... https://origsvn.digium.com/svn/asterisk/branches/1.4 ........ r259104 | mmichelson | 2010-04-26 16:44:43 -0500 (Mon, 26 Apr 2010) | 3 lines Let compilation succeed warning-free when DONT_OPTIMIZE is turned off. ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@259105 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Mark Michelson	317a12d950	Merged revisions 259018 via svnmerge from ... https://origsvn.digium.com/svn/asterisk/branches/1.4 ........ r259018 | mmichelson | 2010-04-26 16:03:08 -0500 (Mon, 26 Apr 2010) | 13 lines Prevent Newchannel manager events for dummy channels. No Newchannel manager event will be fired for channels that are allocated to not match a registered technology type. Thus bogus channels allocated solely for variable substitution or CDR operations do not result in a Newchannel event. (closes issue #16957) Reported by: atis Review: https://reviewboard.asterisk.org/r/601 ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@259023 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Matthew Nicholson	99a7b2fed0	Fix previous commit. ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@258675 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Matthew Nicholson	8c41f2db82	Merged revisions 193391,258670 via svnmerge from ... https://origsvn.digium.com/svn/asterisk/branches/1.4 ........ r193391 | mnicholson | 2009-05-08 16:01:25 -0500 (Fri, 08 May 2009) | 8 lines Set the proper disposition on originated calls. (closes issue #14167) Reported by: jpt Patches: call-file-missing-cdr2.diff uploaded by mnicholson (license 96) Tested by: dlotina, rmartinez, mnicholson ........ r258670 | mnicholson | 2010-04-22 16:49:07 -0500 (Thu, 22 Apr 2010) | 11 lines Fix broken CDR behavior. This change allows a CDR record previously marked with disposition ANSWERED to be set as BUSY or NO ANSWER. Additionally this change partially reverts r235635 and does not set the AST_CDR_FLAG_ORIGINATED flag on CDRs generated from ast_call(). To preserve proper CDR behavior, the AST_CDR_FLAG_DIALED flag is now cleared from all brige CDRs in ast_bridge_call(). (closes issue #16797) Reported by: VarnishedOtter Tested by: mnicholson ........ (closes issue #16222) Reported by: telles Tested by: mnicholson git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@258671 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Eliel C. Sardanons	a753e8878b	Asterisk data retrieval API. ... This module implements an abstraction for retrieving and exporting asterisk data. Developed by: Brett Bryant <brettbryant@gmail.com> Eliel C. Sardanons (LU1ALY) <eliels@gmail.com> For the Google Summer of code 2009 Project. Documentation can be found in doxygen format and inside the header include/asterisk/data.h Review: https://reviewboard.asterisk.org/r/275/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@258517 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Mark Michelson	e24661fd18	Merge Call completion support into trunk. ... From Reviewboard: CCSS stands for Call Completion Supplementary Services. An admittedly out-of-date overview of the architecture can be found in the file doc/CCSS_architecture.pdf in the CCSS branch. Off the top of my head, the big differences between what is implemented and what is in the document are as follows: 1. We did not end up modifying the Hangup application at all. 2. The document states that a single call completion monitor may be used across multiple calls to the same device. This proved to not be such a good idea when implementing protocol-specific monitors, and so we ended up using one monitor per-device per-call. 3. There are some configuration options which were conceived after the document was written. These are documented in the ccss.conf.sample that is on this review request. For some basic understanding of terminology used throughout this code, see the ccss.tex document that is on this review. This implements CCBS and CCNR in several flavors. First up is a "generic" implementation, which can work over any channel technology provided that the channel technology can accurately report device state. Call completion is requested using the dialplan application CallCompletionRequest and can be canceled using CallCompletionCancel. Device state subscriptions are used in order to monitor the state of called parties. Next, there is a SIP-specific implementation of call completion. This method uses the methods outlined in draft-ietf-bliss-call-completion-06 to implement call completion using SIP signaling. There are a few things to note here: * The agent/monitor terminology used throughout Asterisk sometimes is the reverse of what is defined in the referenced draft. * Implementation of the draft required support for SIP PUBLISH. I attempted to write this in a generic-enough fashion such that if someone were to want to write PUBLISH support for other event packages, such as dialog-state or presence, most of the effort would be in writing callbacks specific to the event package. * A subportion of supporting PUBLISH reception was that we had to implement a PIDF parser. The PIDF support added is a bit minimal. I first wrote a validation routine to ensure that the PIDF document is formatted properly. The rest of the PIDF reading is done in-line in the call-completion-specific PUBLISH-handling code. In other words, while there is PIDF support here, it is not in any state where it could easily be applied to other event packages as is. Finally, there are a variety of ISDN-related call completion protocols supported. These were written by Richard Mudgett, and as such I can't really say much about their implementation. There are notes in the CHANGES file that indicate the ISDN protocols over which call completion is supported. Review: https://reviewboard.asterisk.org/r/523 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@256528 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Richard Mudgett	a5a0a5f867	Consolidate ast_channel.cid.cid_rdnis into ast_channel.redirecting.from.number. ... SWP-1229 ABE-2161 * Ensure chan_local.c:local_call() will not leak cid.cid_dnid when copying. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@256104 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Russell Bryant	37797ddd52	Merged revisions 256009 via svnmerge from ... https://origsvn.digium.com/svn/asterisk/branches/1.4 ........ r256009 | russell | 2010-04-02 18:30:15 -0500 (Fri, 02 Apr 2010) | 2 lines Remove extremely verbose debug message. ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@256010 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Kevin P. Fleming	42577406fd	Improve handling of T.38 re-INVITEs that arrive before a T.38-capable ... application is executing on a channel. This patch addresses an issue found during working with end-users using res_fax. If an incoming call is answered in the dialplan, or jumps to the 'fax' extension due to reception of a CNG tone (with faxdetect enabled), and then the remote endpoint sends a T.38 re-INVITE, it is possible for the channel's T.38 state to be 'T38_STATE_NEGOTIATING' when the application starts up. Unfortunately, even if the application wants to use T.38, it can't respond to the peer's negotiation request, because the AST_CONTROL_T38_PARAMETERS control frame that chan_sip sent originally has been lost, and the application needs the content of that frame to be able to formulate a reply. This patch adds a new 'request' type to AST_CONTROL_T38_PARAMETERS, AST_T38_REQUEST_PARMS. If the application sends this request, chan_sip will re-send the original control frame (with AST_T38_REQUEST_NEGOTIATE as the request type), and the application can respond as normal. If this occurs within the five second timeout in chan_sip, the automatic cancellation of the peer reinvite will be stopped, and the application will 'own' the negotiation process from that point onwards. This also improves the code path in chan_sip to allow sip_indicate(), when called for AST_CONTROL_T38_PARAMETERS, to be able to return a non-zero response, which should have been in place before since the control frame *can* fail to be processed properly. It also modifies ast_indicate() to return whatever result the channel driver returned for this control frame, rather than converting all non-zero results into '-1'. Finally, the new request type intentionally returns a positive value, so that an application that sends AST_T38_REQUEST_PARMS can know for certain whether the channel driver accepted it and will be replying with a control frame of its own, or whether it was ignored (if the sip_indicate()/ast_indicate() path had properly supported failure responses before, this would not be necessary). This patch also modifies res_fax to take advantage of the new request. In addition, this patch makes sip_t38_abort() actually lock the private structure before doing its work... bad programmer, no donut. This patch also enhances chan_sip's 'faxdetect' support to allow triggering on T.38 re-INVITEs received as well as CNG tone detection. Review: https://reviewboard.asterisk.org/r/556/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@254450 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Jeff Peeler	48edf2c78a	Exit native bridging early for greater timing accuracy with warnings ... This changes native bridging to break one millisecond early so that the more accurate timeval calculations done in the generic bridge can be performed using the bridge config. Currently the time between exiting native bridging slightly late can sometimes cause a large enough discrepancy for warnings to be missed. For the record, 1.4 does not attempt to native bridge at all when warnings are enabled. (closes issue #15815) Reported by: adomjan Review: https://reviewboard.asterisk.org/r/577/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@254050 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Terry Wilson	68d1ded8dd	Only change the RTP ssrc when we see that it has changed ... This change basically reverts the change reviewed in https://reviewboard.asterisk.org/r/374/ and instead limits the updating of the RTP synchronization source to only those times when we detect that the other side of the conversation has changed the ssrc. The problem is that SRCUPDATE control frames are sent many times where we don't want a new ssrc, including whenever Asterisk has to send DTMF in a normal bridge. This is also not the first time that this mistake has been made. The initial implementation of the ast_rtp_new_source function also changed the ssrc--and then it was removed because of this same issue. Then, we put it back in again to fix a different issue. This patch attempts to only change the ssrc when we see that the other side of the conversation has changed the ssrc. It also renames some functions to make their purpose more clear. Review: https://reviewboard.asterisk.org/r/540/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@252089 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Richard Mudgett	efea9ad922	Fix placing ISDN calls on hold preventing native bridging from being reexamined after a transfer. ... Consider the following scenario: /-- B A == * == Network \-- C Party B calls party A (EuroISDN BRI phone) Party A puts B on hold using the HOLD/RETRIEVE messages. Party A calls party C. Party A puts C on hold to talk with party B again. Party A transfers B to C by hanging up. The call does not get the opportunity to get re-transferred into the ISDN network by the native bridge because native bridging is not being reexamined after the initial transfer. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@247609 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
David Vossel	091f850a58	fixes sample rate conversion issue with Monitor application ... When using ast_seekstream with the read/write streams of a monitor, the number of samples we are seeking must be of the same rate as the stream or the jump calculation will be incorrect. This patch adds logic to correctly convert the number of samples to jump to the sample rate the read/write stream is using. For example, if the call is G722 (16khz) and the read/write stream is recording a 8khz wav, seeking 320 samples of 16khz audio is not the same as seeking 320 samples of 8khz audio when performing the ast_seekstream on the stream. ABE-2044 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@246899 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
David Vossel	7d5d0311c1	Merged revisions 246545 via svnmerge from ... https://origsvn.digium.com/svn/asterisk/branches/1.4 ........ r246545 | dvossel | 2010-02-12 17:30:17 -0600 (Fri, 12 Feb 2010) | 16 lines lock channel during datastore removal On channel destruction the channel's datastores are removed and destroyed. Since there are public API calls to find and remove datastores on a channel, a lock should be held whenever datastores are removed and destroyed. This resolves a crash caused by a race condition in app_chanspy.c. (closes issue #16678) Reported by: tim_ringenbach Patches: datastore_destroy_race.diff uploaded by tim ringenbach (license 540) Tested by: dvossel ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@246546 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Tilghman Lesher	72c1b76038	Merged revisions 244070 via svnmerge from ... https://origsvn.digium.com/svn/asterisk/branches/1.4 ........ r244070 | tilghman | 2010-02-01 11:46:31 -0600 (Mon, 01 Feb 2010) | 16 lines Revert previous chan_local fix (r236981) and fix instead by destroying expired frames in the queue. (closes issue #16525) Reported by: kobaz Patches: 20100126__issue16525.diff.txt uploaded by tilghman (license 14) 20100129__issue16525__1.6.0.diff.txt uploaded by tilghman (license 14) Tested by: kobaz, atis (closes issue #16581) Reported by: ZX81 (closes issue #16681) Reported by: alexr1 ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@244071 65c4cc65-6c06-0410-ace0-fbb531ad65f3	16 years ago
Jeff Peeler	c277952cea	Merged revisions 243258 via svnmerge from ... https://origsvn.digium.com/svn/asterisk/branches/1.4 ........ r243258 | jpeeler | 2010-01-26 12:19:10 -0600 (Tue, 26 Jan 2010) | 2 lines Remove unnecessary code in ast_read as issue 16058 has been fully solved now. ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@243266 65c4cc65-6c06-0410-ace0-fbb531ad65f3	16 years ago
Jeff Peeler	568c057c4c	Extend max call limit duration from 24.8 days to 292+ million years. ... If the limit was set past MAX_INT upon answering, the call was immediately hung up due to overflow from the return of ast_tvdiff_ms (in ast_check_hangup). The time calculation functions ast_tvdiff_sec and ast_tvdiff_ms have been changed to return an int64_t to prevent overflow. Also the reporter suggested adding a message indicating the reason for the call hanging up. Given that the new limit is so much higher, the message (which would only really be useful in the overflow scenario) has been made a debug message only. (closes issue #16006) Reported by: viraptor git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@241143 65c4cc65-6c06-0410-ace0-fbb531ad65f3	16 years ago
Jeff Peeler	9228fba7d7	Fix broken call pickup ... The problem was the OUTGOING flag was not getting set properly on the channel, resulting in pickup failing as ast_read thought the call was inbound. Refer to 170393 for a more verbose description as this is the same exact change. (closes issue #16539) Reported by: syspert Patches: bug16539.patch uploaded by jpeeler (license 325) Tested by: syspert git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@240179 65c4cc65-6c06-0410-ace0-fbb531ad65f3	16 years ago
David Vossel	03529837cc	add silence gen to wait apps ... asterisk.conf's 'transmit_silence' option existed before this patch, but was limited to only generating silence while recording and sending DTMF. Now enabling the transmit_silence option generates silence during wait times as well. To achieve this, ast_safe_sleep has been modified to generate silence anytime no other generators are present and transmit_silence is enabled. Wait apps not using ast_safe_sleep now generate silence when transmit_silence is enabled as well. (closes issue #16524) Reported by: kobaz (closes issue #16523) Reported by: kobaz Tested by: dvossel Review: https://reviewboard.asterisk.org/r/456/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@239712 65c4cc65-6c06-0410-ace0-fbb531ad65f3	16 years ago
David Vossel	a575a50cd5	fixes ast_transfer stall until hangup if called with a channel that doesn't support transfers ...	16 years ago
Jeff Peeler	cf7b67d9d3	Merged revisions 235635 via svnmerge from ... https://origsvn.digium.com/svn/asterisk/branches/1.4 ........ r235635 | jpeeler | 2009-12-18 16:29:51 -0600 (Fri, 18 Dec 2009) | 48 lines Correct CDR dispositions for BUSY/FAILED This patch is simple in that it reorders the disposition defines so that the fix for issue 12946 works properly (the default CDR disposition was changed to AST_CDR_NOANSWER). Also, the AST_CDR_FLAG_ORIGINATED flag was set in ast_call to ensure all CDR records are written. The side effects of CDR changes are scary, so I'm documenting the test cases performed to attempt to catch any regressions. The following tests were all performed using 1.4 rev 195881 vs head (235571) + patch: A calls B C calls B (busy) Hangup C Hangup A (Both SIP and features) A calls B A blind transfers to C Hangup C (Both SIP and features) A calls B A attended transfers to C Hangup C A calls B A attended transfers to C (SIP) C blind transfers to A (features) Hangup A All of the test scenario CDRs matched. The following tests were performed just with the patch to ensure proper operation (with unanswered=yes): exten =>s,1,Answer exten =>s,n,ResetCDR(w) exten =>s,n,ResetCDR(w) exten =>s,1,ResetCDR(w) exten =>s,n,ResetCDR(w) (closes issue #16180) Reported by: aatef Patches: bug16180.patch uploaded by jpeeler (license 325) ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@235660 65c4cc65-6c06-0410-ace0-fbb531ad65f3	16 years ago
Jeff Peeler	473837a4ab	Change match criteria existence in ast_channel_cmp_cb to use ast_strlen_zero. ... (closes issue #16161) Reported by: may213 Patches: core-show-channel.patch uploaded by may213 (license 454) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@235226 65c4cc65-6c06-0410-ace0-fbb531ad65f3	16 years ago
Russell Bryant	97bb26bf75	Merged revisions 233092 via svnmerge from ... https://origsvn.digium.com/svn/asterisk/branches/1.4 ........ r233092 | russell | 2009-12-04 11:12:47 -0600 (Fri, 04 Dec 2009) | 7 lines Only do frame payload check for HOLD frames. This code was added for helping to debug the source of invalid HOLD frames. However, a side effect of this is that it will incorrectly report errors for frames that have an integer payload. Make the check for this block specific to the HOLD frame case. ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@233100 65c4cc65-6c06-0410-ace0-fbb531ad65f3	16 years ago
Jeff Peeler	d9f37a67e1	Merged revisions 231911 via svnmerge from ... https://origsvn.digium.com/svn/asterisk/branches/1.4 ........ r231911 | jpeeler | 2009-12-01 15:29:31 -0600 (Tue, 01 Dec 2009) | 12 lines Fix crash with invalid frame data The crash was happening as a result of a frame containing an invalid data pointer, but was set with data length of zero. The few times the issue was reproduced it _seemed_ that the frame was queued properly, that is the data pointer was set to NULL. I never could reproduce the crash so as a last resort the crash has been fixed, but a check in __ast_read has been added to give as much information about the source of problematic frames in the future. (closes issue #16058) Reported by: atis ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@231927 65c4cc65-6c06-0410-ace0-fbb531ad65f3	16 years ago
Tilghman Lesher	f98c12a57d	Merged revisions 231298 via svnmerge from ... https://origsvn.digium.com/svn/asterisk/branches/1.4 ........ r231298 | tilghman | 2009-11-25 16:31:57 -0600 (Wed, 25 Nov 2009) | 2 lines After a frame duplication failure, unlock the channel before returning. ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@231299 65c4cc65-6c06-0410-ace0-fbb531ad65f3	16 years ago
Tilghman Lesher	5e2aa190fe	Display a list of channel variables in each channel-oriented event. ... (Closes AST-33) Reviewboard: https://reviewboard.asterisk.org/r/368/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@230111 65c4cc65-6c06-0410-ace0-fbb531ad65f3	16 years ago
Leif Madsen	fef304e641	Merged revisions 228896 via svnmerge from ... https://origsvn.digium.com/svn/asterisk/branches/1.4 ........ r228896 | lmadsen | 2009-11-09 09:37:43 -0600 (Mon, 09 Nov 2009) | 6 lines Update WARNING message. Update a WARNING message to give a suggested fix when encountered. (closes issue #16198) Reported by: atis Tested by: atis ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@228897 65c4cc65-6c06-0410-ace0-fbb531ad65f3	16 years ago
David Vossel	10fa8fe8d0	Merged revisions 228692 via svnmerge from ... https://origsvn.digium.com/svn/asterisk/branches/1.4 ........ r228692 | dvossel | 2009-11-06 16:33:27 -0600 (Fri, 06 Nov 2009) | 9 lines fixes audiohook write crash occuring in chan_spy whisper mode. After writing to the audiohook list in ast_write(), frames were being freed incorrectly. Under certain conditions this resulted in a double free crash. (closes issue #16133) Reported by: wetwired (closes issue #16045) Reported by: bluecrow76 Patches: issue16045.diff uploaded by dvossel (license 671) Tested by: bluecrow76, dvossel, habile ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@228693 65c4cc65-6c06-0410-ace0-fbb531ad65f3	16 years ago
Tilghman Lesher	d8e0c58437	Expand codec bitfield from 32 bits to 64 bits. ... Reviewboard: https://reviewboard.asterisk.org/r/416/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@227580 65c4cc65-6c06-0410-ace0-fbb531ad65f3	16 years ago
Richard Mudgett	1174a61612	Add support for calling and called subaddress. Partial support for COLP subaddress. ... The Telecom Specs in NZ suggests that SUB ADDRESS is always on, so doing "desk to desk" between offices each with an asterisk box over the ISDN should then be possible, without a whole load of DDI numbers required. (closes issue #15604) Reported by: alecdavis Patches: asterisk_subaddr_trunk.diff11.txt uploaded by alecdavis (license 585) Some minor modificatons were made. Tested by: alecdavis, rmudgett Review: https://reviewboard.asterisk.org/r/405/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@225357 65c4cc65-6c06-0410-ace0-fbb531ad65f3	16 years ago
Kevin P. Fleming	cdd1f9e296	Finish implementaton of astobj2 OBJ_MULTIPLE, and convert ast_channel_iterator to use it. ... This patch finishes the implementation of OBJ_MULTIPLE in astobj2 (the case where multiple results need to be returned; OBJ_NODATA mode already was supported). In addition, it converts ast_channel_iterators (only the targeted versions, not the ones that iterate over all channels) to use this method. During this work, I removed the 'ao2_flags' arguments to the ast_channel_iterator constructor functions; there were no uses of that argument yet, there is only one possible flag to pass, and it made the iterators less 'opaque'. If at some point in the future someone really needs an ast_channel_iterator that does not lock the container, we can provide constructor(s) for that purpose. Review: https://reviewboard.asterisk.org/r/379/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@225244 65c4cc65-6c06-0410-ace0-fbb531ad65f3	16 years ago
Matthew Nicholson	0d4726b0a2	Merged revisions 223225 via svnmerge from ... https://origsvn.digium.com/svn/asterisk/branches/1.4 ........ r223225 | mnicholson | 2009-10-09 13:20:11 -0500 (Fri, 09 Oct 2009) | 8 lines Signal timeouts by returning AST_CONTROL_RINGING when originating calls. (closes issue #15104) Reported by: nblasgen Patches: manager-timeout1.diff uploaded by mnicholson (license 96) Tested by: nblasgen, mnicholson ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@223273 65c4cc65-6c06-0410-ace0-fbb531ad65f3	16 years ago