https://origsvn.digium.com/svn/asterisk/trunk
................
r203116 | russell | 2009-06-25 11:04:10 -0500 (Thu, 25 Jun 2009) | 18 lines
Merged revisions 203115 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r203115 | russell | 2009-06-25 11:02:16 -0500 (Thu, 25 Jun 2009) | 11 lines
Resolve a crash related to a T.38 reinvite race condition.
This change resolves a crash observed locally during some T.38 testing.
A call was set up using a call file, and when the T.38 reinvite came in,
the channel state was still AST_STATE_DOWN. The reason is explained by
a comment in the code that previously lived in the handling of
AST_STATE_RINGING. This change modifies the logic to handle the same
race condition for any channel state that is not UP.
(closes ABE-1895)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@203117 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r203037 | rmudgett | 2009-06-24 16:08:55 -0500 (Wed, 24 Jun 2009) | 15 lines
Merged revisions 203036 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r203036 | rmudgett | 2009-06-24 16:01:43 -0500 (Wed, 24 Jun 2009) | 8 lines
Improved chan_dahdi.conf pritimer error checking.
Valid format is: pritimer=timer_name,timer_value
* Fixed segfault if the ',' is missing.
* Completely check the range returned by pri_timer2idx() to prevent
possible access outside array bounds.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@203044 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r202343 | mmichelson | 2009-06-22 09:58:24 -0500 (Mon, 22 Jun 2009) | 36 lines
Merged revisions 202341-202342 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r202341 | mmichelson | 2009-06-22 09:42:55 -0500 (Mon, 22 Jun 2009) | 26 lines
Fix a situation in which Asterisk would not stop retransmitting 487s.
If a CANCEL were received by Asterisk, we would send a 487 in response
to the original INVITE and a 200 OK for the CANCEL. If there were a network
hiccup which caused the 200 OK and the 487 to be lost, then the UA communicating
with Asterisk may try to retransmit its CANCEL. Asterisk's response to this used
to be to try sending another 487 to the canceled INVITE and another 200 OK to the
CANCEL.
The problem here is that the originally-sent 487 was sent "reliably" meaning that
it will be retransmitted until it is received properly. So when we receive the second
CANCEL it is likely that the first batch of 487s we sent is still going strong and
reaches the UA. The result was that the second set of 487s would be retransmitted
constantly until the maximum number of retries had been reached.
The fix for this is that if we receive a second CANCEL for an INVITE, then we cancel
the retransmission of the first set of 487s and start a second set. This causes the
dialog to be terminated reasonably.
(closes issue #14584)
Reported by: klaus3000
Patches:
14584_v2.patch uploaded by mmichelson (license 60)
Tested by: klaus3000
........
r202342 | mmichelson | 2009-06-22 09:44:58 -0500 (Mon, 22 Jun 2009) | 3 lines
Remove an extra debug line left from previous commit.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@202344 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r202337 | mmichelson | 2009-06-22 09:35:09 -0500 (Mon, 22 Jun 2009) | 31 lines
Merged revisions 202336 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r202336 | mmichelson | 2009-06-22 09:34:05 -0500 (Mon, 22 Jun 2009) | 25 lines
Fix a possible infinite loop in SDP parsing during glare situation.
There was a while loop in get_ip_and_port_from_sdp which was controlled
by a call to get_sdp_iterate. The loop would exit either if what we were
searching for was found or if the return was NULL. The problem is that
get_sdp_iterate never returns NULL. This means that if what we were searching
for was not present, the loop would run infinitely. This modification of the
loop fixes the problem.
(closes issue #15213)
Reported by: schmidts
(closes issue #15349)
Reported by: samy
(closes issue #14464)
Reported by: pj
(closes issue #15345)
Reported by: aragon
Patches:
sip_inf_loop.patch uploaded by mmichelson (license 60)
Tested by: aragon
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@202338 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r201462 | mmichelson | 2009-06-17 15:10:01 -0500 (Wed, 17 Jun 2009) | 12 lines
Fix problem with no audio due to ignoring the SDP.
A recent change to our SDP version comparison made audio not function
on some calls. This was because of a test wherein we were trying to
see if an unsigned value was less than 0. This is a dumb comparison
and arguably the compiler should have warned about it. Alas, though,
it slipped past. Now it's fixed by changing the variable to be a
signed type.
Found by several developers. Tested by mnicholson and dbrooks.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@201463 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r200946 | dvossel | 2009-06-16 11:03:30 -0500 (Tue, 16 Jun 2009) | 32 lines
SIP transport type issues
What this patch addresses:
1. ast_sip_ouraddrfor() by default binds to the UDP address/port
reguardless if the sip->pvt is of type UDP or not. Now when no
remapping is required, ast_sip_ouraddrfor() checks the sip_pvt's
transport type, attempting to set the address and port to the
correct TCP/TLS bindings if necessary.
2. It is not necessary to send the port number in the Contact
header unless the port is non-standard for the transport type.
This patch fixes this and removes the todo note.
3. In sip_alloc(), the default dialog built always uses transport
type UDP. Now sip_alloc() looks at the sip_request (if present)
and determines what transport type to use by default.
4. When changing the transport type of a sip_socket, the file
descriptor must be set to -1 and in some cases the tcptls_session's
ref count must be decremented and set to NULL. I've encountered
several issues associated with this process and have created a function,
set_socket_transport(), to handle the setting of the socket type.
(closes issue #13865)
Reported by: st
Patches:
dont_add_port_if_tls.patch uploaded by Kristijan (license 753)
13865.patch uploaded by mmichelson (license 60)
tls_port_v5.patch uploaded by vrban (license 756)
transport_issues.diff uploaded by dvossel (license 671)
Tested by: mmichelson, Kristijan, vrban, jmacz, dvossel
Review: https://reviewboard.asterisk.org/r/278/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@200992 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r165180 | mnicholson | 2008-12-17 12:49:12 -0600 (Wed, 17 Dec 2008) | 14 lines
This patch adds a new 'ignoresdpversion' option to sip.conf. When this is
enabled (either globally or for a specific peer), chan_sip will treat any SDP
data it receives as new data and update the media stream accordingly. By
default, Asterisk will only modify the media stream if the SDP session version
received is different from the current SDP session version. This option is
required to interoperate with devices that have non-standard SDP session
version implementations (observed by toc on the bug tracker with Microsoft OCS
which always uses 0 as the session version).
http://reviewboard.digium.com/r/94/
(closes issue #13958)
Reported by: toc
Tested by: toc
........
r200689 | kpfleming | 2009-06-15 15:42:38 -0500 (Mon, 15 Jun 2009) | 12 lines
Accept T.38 re-INVITE responses with invalid SDP versions.
This commit changes the 'incoming SDP version' check logic a bit more; when
'ignoresdpversion' is *not* set for a peer, if we initiate a re-INVITE to
switch to T.38, we'll always accept the peer's SDP response, even if they
don't properly increment the SDP version number as they should. If this situation
occurs, a warning message will be generated suggesting that the peer's
configuration be changed to include the 'ignoresdpversion' configuration option
(although ideally they'd fix their SIP implementation to be RFC compliant).
AST-221
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@200724 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r199818 | dvossel | 2009-06-09 15:47:57 -0500 (Tue, 09 Jun 2009) | 11 lines
CLI NOTIFY sending wrong transport type.
SIP's cli NOTIFY command only used UDP rather than copying the transport type from the peer.
(closes issue #15283)
Reported by: jthurman
Patches:
sip-notify-tcp-svn199728.patch uploaded by jthurman (license 614)
Tested by: jthurman, dvossel
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@199821 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r199227 | mmichelson | 2009-06-05 08:51:08 -0500 (Fri, 05 Jun 2009) | 14 lines
Correct "dahdi show channels" output when specifying a group.
Since a DAHDI channel may belong to multiple groups, we need to use
a bitwise and instead of equivalence to determine whether to display
the channel information.
(closes issue #15248)
Reported by: gentian
Patches:
15248.patch uploaded by mmichelson (license 60)
Tested by: gentian
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@199228 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r198824 | dvossel | 2009-06-02 12:55:35 -0500 (Tue, 02 Jun 2009) | 8 lines
fixes issue with channels not going down after transfer
Iax2 currently does not support native bridging if the timeoutms value is set. We check for that in iax2_bridge, but then set timeoutms to 0 by default. If the timeoutms is not provided it is set to -1. By setting timeoutms to 0 it is processed causing a bridging retry loop.
(closes issue #15216)
Reported by: oxymoron
Tested by: dvossel
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@198825 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r197621 | eliel | 2009-05-28 12:01:48 -0400 (Thu, 28 May 2009) | 19 lines
Merged revisions 197562 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r197562 | eliel | 2009-05-28 11:21:32 -0400 (Thu, 28 May 2009) | 13 lines
Use the address we already know when reloading a peer with nat=yes.
If we already have an address for a peer, and we are reloading the sip
configuration, try to use that address to contact the peer, instead of
getting it from the Contact.
(closes issue #15194)
Reported by: ibc
Patches:
sip.patch uploaded by eliel (license 64)
Tested by: manwe
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@197704 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r197606 | mmichelson | 2009-05-28 10:32:19 -0500 (Thu, 28 May 2009) | 22 lines
Recorded merge of revisions 197588 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r197588 | mmichelson | 2009-05-28 10:27:49 -0500 (Thu, 28 May 2009) | 16 lines
Allow for media to arrive from an alternate source when responding to a reinvite with 491.
When we receive a SIP reinvite, it is possible that we may not be able to process the
reinvite immediately since we have also sent a reinvite out ourselves. The problem is
that whoever sent us the reinvite may have also sent a reinvite out to another party,
and that reinvite may have succeeded.
As a result, even though we are not going to accept the reinvite we just received, it
is important for us to not have problems if we suddenly start receiving RTP from a new
source. The fix for this is to grab the media source information from the SDP of the
reinvite that we receive. This information is passed to the RTP layer so that it will
know about the alternate source for media.
Review: https://reviewboard.asterisk.org/r/252
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@197615 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r197467 | file | 2009-05-28 10:47:45 -0300 (Thu, 28 May 2009) | 15 lines
Merged revisions 197466 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r197466 | file | 2009-05-28 10:44:58 -0300 (Thu, 28 May 2009) | 8 lines
Fix a bug where the flag indicating the presence of rport would get overwritten by the nat setting.
The presence of rport is now stored as a separate flag. Once the dialog is setup and authenticated
(or it passes through unauthenticated) the proper nat flag is set.
(closes issue #13823)
Reported by: dimas
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@197469 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r196988 | seanbright | 2009-05-27 09:02:54 -0400 (Wed, 27 May 2009) | 9 lines
Display an error message when chan_alsa fails to load due to a missing
or inaccessible configuration file.
Before this change, when chan_alsa failed to load due to a missing or
inaccessible configuration file, no message would be displayed. With this
change, when chan_alsa fails to load due to a missing or inaccessible
configuration file, a message will be displayed.
(closes issue #14760)
Reported by: Nick_Lewis
Patches:
chan_alsa.c-confload.patch uploaded by Nick (license 657)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@196989 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r196416 | dvossel | 2009-05-22 16:09:45 -0500 (Fri, 22 May 2009) | 19 lines
SIP set outbound transport type from Registration
In sip.conf the transport option allows for the configuration of what transport types (udp, tcp, and tls) a peer will accept, but only the first type listed was used for outbound connections. This patch changes this. Now the default transport type is only used until the peer registers. When registration takes place the transport type is parsed out of the Contact header. If the Contact header's transport type is equal to one that the peer supports, the peer's default transport type for outbound connections is set to match the Contact header's type. If the Contact header's transport type is not present, then the peer's default transport type is set to match the one the peer registered with. When a peer unregisters or the registration expires, the default transport type for that peer is reset.
(closes issue #12282)
Reported by: rjain
Patches:
reg_patch_1.diff uploaded by dvossel (license 671)
Tested by: dvossel
(closes issue #14727)
Reported by: pj
Patches:
reg_patch_3.diff uploaded by dvossel (license 671)
Tested by: pj, dvossel
Review: https://reviewboard.asterisk.org/r/249/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@196454 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r195995 | dvossel | 2009-05-21 14:11:49 -0500 (Thu, 21 May 2009) | 20 lines
Merged revisions 195991 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r195991 | dvossel | 2009-05-21 14:04:56 -0500 (Thu, 21 May 2009) | 14 lines
Sign problem calculating timestamp for iax frame leads to no audio on the receiving peer.
There are rare cases in which a frame's delivery timestamp is slightly less than the iax2_pvt's offset. This causes the pvt's timestamp to be a small negative number, but since the timestamp value is unsigned it looks like a huge positive number. This patch checks for this negative case and sets the ms to zero. A similar check is already done right below this one in the 'else' statement.
(closes issue #15032)
Reported by: guillecabeza
Patches:
chan_iax2.c.patch_timestamp uploaded by guillecabeza (license 380)
Tested by: guillecabeza
(closes issue #14216)
Reported by: Andrey Sofronov
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@195997 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r194833 | dvossel | 2009-05-15 15:52:12 -0500 (Fri, 15 May 2009) | 24 lines
Merged revisions 194557,194685 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r194557 | dvossel | 2009-05-14 17:59:43 -0500 (Thu, 14 May 2009) | 10 lines
IAX2 "Ghost" Channels
There is a bug tracker issue where people are reporting "Ghost" channels in their 'iax2 show channels' output. The confusion is caused by channels being listed as "(NONE)" with format "unknown". These are not channels of coarse. They are usually just pending registration or poke requests, but it is confusing output. To help make sense of this I have added two columns to 'iax2 show channels'. One shows the first message which started the transaction, and the second shows the last message sent by either side of the call. This helps diagnose why the entry exists and why it may not go away.
(closes issue #14207)
Reported by: clive18
Review: https://reviewboard.asterisk.org/r/246/
........
r194685 | dvossel | 2009-05-15 10:40:37 -0500 (Fri, 15 May 2009) | 6 lines
Update to previous IAX2 "Ghost" Channels patch.
Fixed some comments made on reviewboard for the previous patch.
(issue #14207)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@194834 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r194496 | mmichelson | 2009-05-14 17:20:51 -0500 (Thu, 14 May 2009) | 30 lines
Merged revisions 194484 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r194484 | mmichelson | 2009-05-14 17:17:55 -0500 (Thu, 14 May 2009) | 24 lines
Fix a race condition where a reinvite could trigger a 482 response.
The loop detection/spiral detection code in chan_sip used the owner
channel's state as a criterion for determining if the incoming INVITE
is a looped request. The problem with this is that the INVITE-handling
code happens in a different thread than the thread that marks the owner
channel as being up. As a result, if a reinvite were to come in very quickly,
say from another Asterisk on the same LAN, it was possible for the reinvite
to arrive before the owner channel had been set to the up state.
This patch corrects the problem by using the invitestate of the sip_pvt
instead, since that can be guaranteed to be set correctly by the time
the reinvite arrives. Since there is a switch statement further in the
INVITE-handling code, the AST_STATE_RINGING state also checks the invitestate
of the sip_pvt in case we should actually be treating the channel as if it were
up already.
(closes issue #12215)
Reported by: jpyle
Patches:
12215_confirmed.patch uploaded by mmichelson (license 60)
Tested by: lmadsen
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@194504 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r193954 | mmichelson | 2009-05-12 15:28:13 -0500 (Tue, 12 May 2009) | 18 lines
Update spiral support in trunk and 1.6.X to match what is in 1.4.
In 1.4, a SIP spiral is treated the same way as a call forward. This
works much better than what is currently in trunk and 1.6.X. The code
in trunk and 1.6.X did not create a new call to the recipient of the spiral,
instead trying to continue the same call. In addition to just being plain
wrong, this also had the side effect of only being able to spiral calls
to other SIP channels.
With this in place, as long as call forwards are honored, SIP spirals
will work properly. This means that it will work for outbound calls
made by the Queue, Dial, and Page applications. For originated calls and
spool calls, however, the spiral will not work properly until a generic
call forward mechanism is introduced into Asterisk.
(relates to issue #13630)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@193960 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r193614 | rmudgett | 2009-05-11 14:11:29 -0500 (Mon, 11 May 2009) | 19 lines
Merged revisions 193613 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r193613 | rmudgett | 2009-05-11 14:09:00 -0500 (Mon, 11 May 2009) | 12 lines
Sent wrong message to clear a call we started if the other end has not responed yet.
In the state MISDN_CALLING (i.e. SETUP was sent but no answer has arrived yet),
it is not allowed to clear the call with RELEASE_COMPLETE. It must be
cleared with DISCONNECT. A RELEASE_COMPLETE is only allowed as an answer
to a SETUP. (See Q.931 ch. 5.3.2, 5.3.2.a, 5.3.2.b)
Patches:
chan-misdn-ccstate7.patch uploaded by customer.
JIRA ABE-1862
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@193615 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r193387 | dvossel | 2009-05-08 15:32:51 -0500 (Fri, 08 May 2009) | 7 lines
TCP not matching valid peer.
find_peer() does not find a valid peer when using pvt->recv as the sockaddr_in argument. Because of the way TCP works, the port number in pvt->recv is not what we're looking for at all. There is currently only one place that find_peer searches for a peer using the sockaddr_in argument. If the peer is not found after using pvt->recv (works for UDP since the port number will be correct), a temp sockaddr_in struct is made using the Contact header in the sip_request. This has the correct port number in it.
Review: http://reviewboard.digium.com/r/236/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@193449 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r193077 | rmudgett | 2009-05-07 17:24:04 -0500 (Thu, 07 May 2009) | 12 lines
Merged revisions 193050 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r193050 | rmudgett | 2009-05-07 17:17:06 -0500 (Thu, 07 May 2009) | 5 lines
Give a more helpful message when an incoming call's dialed extension does not match.
Added the dialed extension and context to the chan_misdn messages warning
that the dialed number cannot be matched in the dialplan.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@193078 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r192933 | tilghman | 2009-05-07 11:43:56 -0500 (Thu, 07 May 2009) | 17 lines
Merged revisions 192932 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r192932 | tilghman | 2009-05-07 11:29:08 -0500 (Thu, 07 May 2009) | 10 lines
Eliminate repetition of fullcontact during reconstruction.
If the fullcontact field appears in both the sippeers and the
sipregs table, then during reconstruction of the field, it will
otherwise be doubled.
(closes issue #14754)
Reported by: Alexei Gradinari
Patches:
20090506__bug14754.diff.txt uploaded by tilghman (license 14)
Tested by: lmadsen
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@192934 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r192387 | file | 2009-05-05 11:22:47 -0300 (Tue, 05 May 2009) | 10 lines
Fix a bug with setting t38pt_udptl at the user or peer level.
If an incoming call authenticated as a user or peer and t38pt_udptl was
not set to yes in general then no UDPTL session would be present and any
T38 related things would fail. This commit changes it so that if after
authenticating T38 is enabled but no UDPTL session is present one will be
created.
(issue AST-215)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@192397 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r190287 | file | 2009-04-23 16:15:30 -0300 (Thu, 23 Apr 2009) | 13 lines
Merged revisions 190286 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r190286 | file | 2009-04-23 16:13:18 -0300 (Thu, 23 Apr 2009) | 6 lines
Fix a bug in chan_local glare hangup detection.
If both sides of a Local channel were hung up at around the same time it was
possible for one thread to destroy the local private structure and have the other thread
immediately try to remove the already freed structure from the local channel list.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@190288 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r189993 | jpeeler | 2009-04-22 14:23:49 -0500 (Wed, 22 Apr 2009) | 18 lines
Make chan_h323 respect packetization settings
Previously, packetization settings were ignored and now they are not. A new
config option 'autoframing' has been added to mirror the way chan_sip handles
it. Turning on the autoframing option (available both as a global option or per
peer) overrides the local settings with the remote packetization settings.
Testing was performed with varying packetization levels with the following
codecs: ulaw, alaw, gsm, and g729.
(closes issue #12415)
Reported by: pj
Patches:
2009012200_h323packetization.diff.txt uploaded by mvanbaak (license 7),
modified by me
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@189995 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r189911 | tilghman | 2009-04-22 11:01:30 -0500 (Wed, 22 Apr 2009) | 7 lines
Do not continue to receive DTMF, when the channel is hungup and about to be destroyed.
(closes issue #14858)
Reported by: barryf
Patches:
20090421__bug14858.diff.txt uploaded by tilghman (license 14)
Tested by: barryf
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@189912 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r189771 | dvossel | 2009-04-21 15:28:37 -0500 (Tue, 21 Apr 2009) | 11 lines
Fixes segfault when switching UDP to TCP in sip.conf after reload.
If transport in sip.conf is switched from UDP to TCP, Asterisk segfaults right after issuing a sip reload. The problem is the socket type is changed to TCP but the fd may still be present for UDP. Later, when the TCP session should be created or set using an existing one, it isn't because the old file descriptor is still present. Now every time transport is changed during a sip.conf reload, the file descriptor is set to -1, signifying it must be created or found.
(closes issue #14727)
Reported by: pj
Tested by: dvossel
Review: http://reviewboard.digium.com/r/229/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@189773 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r189419 | dbailey | 2009-04-20 14:28:16 -0500 (Mon, 20 Apr 2009) | 11 lines
Merged revisions 189391 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r189391 | dbailey | 2009-04-20 14:10:56 -0500 (Mon, 20 Apr 2009) | 4 lines
Clean up problem with manager implementation of mmap where it was not testing against MAP_FAILED response.
Got rid of shadowed variable used in processign the mmap results.
Change test of mmap results to compare against MAP_FAILED
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@189421 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r189204 | dvossel | 2009-04-17 20:28:45 -0500 (Fri, 17 Apr 2009) | 18 lines
Merged revisions 189203 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r189203 | dvossel | 2009-04-17 20:27:19 -0500 (Fri, 17 Apr 2009) | 12 lines
Fixed autologoff in agents.conf not working when agent logs in via AgentLogin app
An agent logs in by calling an extension that calls the AgentLogin app. In agents.conf ackcall=always is set, so when they get a call they have the choice to either acknowledge it or ignore it. autologoff=10 is set as well, so if the agent ignores the call over 10sec one may assume that the agent should be logged out (and in this case hungup on as well), but this was not happening.
(closes issue #14091)
Reported by: evandro
Patches:
autologoff.diff uploaded by dvossel (license 671)
Review: http://reviewboard.digium.com/r/225/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@189205 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r189097 | mmichelson | 2009-04-17 15:20:23 -0500 (Fri, 17 Apr 2009) | 13 lines
Prevent a crash when SIP blonde transferring an unbridged call.
If one attempts to use the attended transfer button on a SIP phone
to transfer an unbridged call (such as a call to an IVR) but hangs
up while the target of the transfer is still ringing, we need to not
crash.
The problem was that ast_hangup was called from outside the channel
thread.
AST-211
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@189101 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r188947 | file | 2009-04-17 11:44:56 -0300 (Fri, 17 Apr 2009) | 22 lines
Merged revisions 188946 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r188946 | file | 2009-04-17 11:41:25 -0300 (Fri, 17 Apr 2009) | 15 lines
Fix a bug where a value used to create the channel name was bogus.
This commit fixes the scenario where an incoming call is authenticated
using a peer entry. Previously the channel name was created using either
the username setting from the sip.conf entry or the IP address that the
call came from. Now the channel name will be created using the peer name
itself. This commit will not change the way the channel name is generated
for users or friends.
(closes issue #14256)
Reported by: Nick_Lewis
Patches:
chan_sip.c-chname.patch uploaded by Nick (license 657)
Tested by: Nick_Lewis, file
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@188948 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r188647 | dvossel | 2009-04-15 17:10:04 -0500 (Wed, 15 Apr 2009) | 18 lines
Merged revisions 188646 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r188646 | dvossel | 2009-04-15 17:08:40 -0500 (Wed, 15 Apr 2009) | 12 lines
National prefix inserted even when caller ID not available
When the caller ID is restricted, the expected behavior is for the caller id to be blank. In chan_dahdi, the national prefix is placed onto the callers number even if its restricted (empty) causing the caller id to be the national prefix rather than blank.
(closes issue #13207)
Reported by: shawkris
Patches:
national_prefix.diff uploaded by dvossel (license 671)
Review: http://reviewboard.digium.com/r/220/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@188648 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r188247 | file | 2009-04-14 10:14:21 -0300 (Tue, 14 Apr 2009) | 7 lines
Fix a bug with the change I made yesterday to outbound proxy support.
Per discussion with oej on IRC we need the actual IP address, not the
outbound proxy IP address, in the sa field. This change matches the already
existing code for all other uses of the outbound proxy setting.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@188248 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r188067 | file | 2009-04-13 13:28:06 -0300 (Mon, 13 Apr 2009) | 10 lines
Fix a bug where using an outbound proxy would cause the local address to be 127.0.0.1.
Copy the outbound proxy IP address into the SIP dialog structure as the IP address we will
be sending to. This has to be done because the logic that determines what local IP address to use
in the SIP messages is not aware of an outbound proxy being in place. It only knows what IP address
we are sending to.
(closes issue #12006)
Reported by: mnicholson
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@188068 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r187906 | jpeeler | 2009-04-10 15:26:46 -0500 (Fri, 10 Apr 2009) | 12 lines
Fix module embedding for chan_h323.
Include libchanh323.a in the modules.link file so that all the symbols can be
resolved at link time.
(closes issue #11966)
Reported by: dome
Patches:
issue_11966.patch uploaded by kpfleming (license 421)
Tested by: jpeeler
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@187912 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A note to all of you. Don't block revisions in a branch if you actually
meant to merge them. Two very old revisions somehow didn't get merged into
1.6.0 and this change was dependent on those two old revisions. What should have
taken 2 minutes has now wasted about 30 minutes of my time :(
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@187555 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r141810 | mmichelson | 2008-09-08 16:18:49 -0500 (Mon, 08 Sep 2008) | 22 lines
Merged revisions 141809 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r141809 | mmichelson | 2008-09-08 16:10:10 -0500 (Mon, 08 Sep 2008) | 14 lines
Fix pedantic mode of chan_sip to only check the
remote tag of an endpoint once a dialog has
been confirmed. Up until that point, it is possible
and legal for the far-end to send provisional
responses with a different To: tag each time. With
this patch applied, these provisional messages
will not cause a matching problem.
(closes issue #11536)
Reported by: ibc
Patches:
11536v2.patch uploaded by putnopvut (license 60)
........
................
r141868 | mmichelson | 2008-09-08 17:14:40 -0500 (Mon, 08 Sep 2008) | 4 lines
Um, apparently I didn't actually finish merging before committing.
Bad bad bad
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@187554 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A bad merge from trunk to 1.6.0 meant freeing memory that
should not be freed. In trunk, pkt->data is an ast_str, but
in 1.6.0, it is allocated in the same chunk of memory as the
sip_pkt. This only affects 1.6.0.
(closes issue #14819)
Reported by: cwolff09
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@186517 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r186461 | kpfleming | 2009-04-03 15:20:01 -0500 (Fri, 03 Apr 2009) | 11 lines
Merged revisions 186458 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r186458 | kpfleming | 2009-04-03 15:19:20 -0500 (Fri, 03 Apr 2009) | 5 lines
Fix a bug where DAHDI/Zaptel channels would not properly switch formats when requested
Don't offer AST_FORMAT_SLINEAR on DAHDI/Zaptel channels... while it could provide a slight performance benefit, the translation core in Asterisk has some flaws when a channel driver offers multiple raw formats. this fix is much simpler than fixing the translation core to solve that issue (although that will be done later).
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@186463 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r185953 | kpfleming | 2009-04-02 08:51:44 -0500 (Thu, 02 Apr 2009) | 11 lines
Merged revisions 185952 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r185952 | kpfleming | 2009-04-02 08:43:43 -0500 (Thu, 02 Apr 2009) | 5 lines
the DAHDI_GETCONF, DAHDI_SETCONF and DAHDI_GET_PARAMS ioctls were recently corrected to show that they do, in fact, read data from userspace as part of their work. due to this fix, valgrind now reports a number of cases where chan_dahdi passed an uninitialized (or partially) buffer to these ioctls, which could lead to unexpected behavior.
this patch corrects chan_dahdi to ensure that buffers passed to these ioctls are always fully initialized.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@185954 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r185846 | dvossel | 2009-04-01 14:03:32 -0500 (Wed, 01 Apr 2009) | 16 lines
Merged revisions 185845 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r185845 | dvossel | 2009-04-01 14:02:00 -0500 (Wed, 01 Apr 2009) | 10 lines
Fixes issue with dropped calles due to re-Invite glare and re-Invites never executing after a 491
Acknowledgement for 491 responses were never being processed because it didn't match our pending invite's seqno. Since the ACK was never processed, the 491 frame would continue to be retransmitted until eventually the call was dropped due to max retries. Now during a pending invite, if we receive another invite, we send an 491 and hold on to that glare invite's seqno in the "glareinvite" variable for that sip_pvt struct. When ACK's are received, we first check to see if it is in response to our pending invite, if not we check to see if it is in response to a glare invite. In this case, it is in response to the glare invite and must be dealt with or the call is dropped. I've changed the wait time for resending the re-Invite after receving a 491 response to comply with RFC 3261. Before this patch the scheduled re-Invite would only change a flag indicating that the re-Invite should be sent out, now it actually sends it out as well.
(closes issue #12013)
Reported by: alx
Review: http://reviewboard.digium.com/r/213/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@185847 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r185363 | dbrooks | 2009-03-31 11:46:57 -0500 (Tue, 31 Mar 2009) | 44 lines
Merged revisions 185362 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r185362 | dbrooks | 2009-03-31 11:37:12 -0500 (Tue, 31 Mar 2009) | 35 lines
Fix incorrect parsing in chan_gtalk when xmpp contains extra whitespaces
To drill into the xmpp to find the capabilities between channels, chan_gtalk
calls iks_child() and iks_next(). iks_child() and iks_next() are functions in
the iksemel xml parsing library that traverse xml nodes. The bug here is that
both iks_child() and iks_next() will return the next iks_struct node
*regardless* of type. chan_gtalk expects the next node to be of type IKS_TAG,
which in most cases, it is, but in this case (a call being made from the
Empathy IM client), there exists iks_struct nodes which are not IKS_TAG data
(they are extraneous whitespaces), and chan_gtalk doesn't handle that case,
so capabilities don't match, and a call cannot be made.
iks_first_tag() and iks_next_tag(), on the other hand, will not return the
very next iks_struct, but will check to see if the next iks_struct is of
type IKS_TAG. If it isn't, it will be skipped, and the next struct of type
IKS_TAG it finds will be returned. This assures that chan_gtalk will find
the iks_struct it is looking for.
This fix simply changes all calls to iks_child() and iks_next() to become
calls to iks_first_tag() and iks_next_tag(), which resolves the capability
matching.
The following is a payload listing from Empathy, which, due to the extraneous
whitespace, will not be parsed correctly by iksemel:
<iq from='dbrooksjab@235-22-24-10/Telepathy' to='astjab@235-22-24-10/asterisk' type='set' id='542757715704'> <session xmlns='http://www.google.com/session' initiator='dbrooksjab@235-22-24-10/Telepathy' type='initiate' id='1837267342'> <description xmlns='http://www.google.com/session/phone'> <payload-type clockrate='16000' name='speex' id='96'/>
<payload-type clockrate='8000' name='PCMA' id='8'/>
<payload-type clockrate='8000' name='PCMU' id='0'/>
<payload-type clockrate='90000' name='MPA' id='97'/>
<payload-type clockrate='16000' name='SIREN' id='98'/>
<payload-type clockrate='8000' name='telephone-event' id='99'/>
</description>
</session>
</iq>
Review: http://reviewboard.digium.com/r/181/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@185426 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r185122 | rmudgett | 2009-03-30 15:41:24 -0500 (Mon, 30 Mar 2009) | 26 lines
Merged revisions 185120 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r185120 | rmudgett | 2009-03-30 15:38:11 -0500 (Mon, 30 Mar 2009) | 19 lines
Make chan_misdn BRI TE side normally defer channel selection to the NT side.
Channel allocation collisions are not handled by chan_misdn very well.
This patch simply avoids the problem for BRI only.
For PRI, allocation collisions are still possible but less likely since
there are simply more channels available and each end could use a different
allocation strategy.
misdn.conf options available:
te_choose_channel - Use to force the TE side to allocate channels.
method - Specify the channel allocation strategy.
(closes issue #13488)
Reported by: Christian_Pinedo
Patches:
isdn_lib.patch.txt uploaded by crich
Tested by: crich, siepkes, festr
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@185124 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r184948 | file | 2009-03-30 11:37:47 -0300 (Mon, 30 Mar 2009) | 21 lines
Merged revisions 184947 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r184947 | file | 2009-03-30 11:35:47 -0300 (Mon, 30 Mar 2009) | 14 lines
Improve our handling of T38 in the initial INVITE from a device.
We now answer with matching media streams to what is requested. If an INVITE
is received with both a T38 and RTP media stream this means we answer with both.
For any outgoing calls created as a result of this inbound one no T38 is requested
in the initial INVITE. Instead if we start receiving udptl packets we trigger a
reinvite on the outbound side.
(closes issue #12437)
Reported by: marsosa
Tested by: pinga-fogo, okrief, file, afu
Review: http://reviewboard.digium.com/r/208/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@184949 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r184838 | russell | 2009-03-29 00:32:04 -0500 (Sun, 29 Mar 2009) | 8 lines
Simplify chan_h323 build to not require a second run of "make".
(closes issue #14715)
Reported by: jthurman
Patches:
h323-makefile-1.6.0.7-rc2.patch uploaded by jthurman (license 614)
h323-makefile-1.6.1.0-rc3.patch uploaded by jthurman (license 614)
h323-makefile-1.6.2.0-beta1.patch uploaded by jthurman (license 614)
Tested by: tzafrir, russell
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@184841 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r184566 | file | 2009-03-27 10:15:26 -0300 (Fri, 27 Mar 2009) | 16 lines
Merged revisions 184565 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r184565 | file | 2009-03-27 10:06:45 -0300 (Fri, 27 Mar 2009) | 9 lines
Fix an issue where nat=yes would not always take effect for the RTP session on outgoing calls.
If calls were placed using an IP address or hostname the global nat setting was copied over
but was not set on the RTP session itself. This caused the RTP stack to not perform symmetric RTP
actions.
(closes issue #14546)
Reported by: acunningham
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@184580 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r184280 | file | 2009-03-25 16:22:06 -0300 (Wed, 25 Mar 2009) | 5 lines
Fix issue with a T38 reinvite being sent even if not configured to do so.
If we receive a T38 request negotiate control frame we should only attempt to do so
if the option is enabled on the dialog.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@184281 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r184037 | russell | 2009-03-24 16:40:44 -0500 (Tue, 24 Mar 2009) | 6 lines
Exclude slin16, siren7, and siren14 from bandwidth=low and =medium
The default codec configuration for chan_iax2 is bandwidth=low. I noticed
slin16 being negotiated as the codec in some test calls, but that no longer
happens after this change.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@184038 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r183117 | mmichelson | 2009-03-19 11:07:54 -0500 (Thu, 19 Mar 2009) | 20 lines
Merged revisions 183115 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r183115 | mmichelson | 2009-03-19 11:04:02 -0500 (Thu, 19 Mar 2009) | 14 lines
Fix an issue where cancelled outgoing SIP calls would erroneously report the device as "in use."
A user was having an issue where if an outgoing SIP call was canceled, the SIP device
would remain in use if we had not received any response to the initial INVITE we sent out.
The SIP device would remain in use until the autocongestion timer was exhausted.
I tracked down the cause of this to be the section of code I am removing here. I asked several
people what the purpose of this code was meant to be, but no one could give me any sort of
answer as to why this was here. The person who was having this issue has been using this patch
for several months and it has stopped the problems they have had.
AST-196
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@183118 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r183108 | file | 2009-03-19 12:37:23 -0300 (Thu, 19 Mar 2009) | 11 lines
Improve our triggering of a T38 switchover internally when triggered by a received reinvite.
Previously we reached across the channel bridge to get the other party's SIP dialog
structure in order to trigger an outgoing reinvite. This is extremely dangerous to do
and only works if bridged to another SIP channel. This patch changes this to use the
T38 control frame method of requesting a switchover. This change also causes the SIP
channel driver to propogate back whether the switchover worked or not instead of blindly
accepting the incoming T38 reinvite.
Review: http://reviewboard.digium.com/r/200/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@183109 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r182847 | russell | 2009-03-17 21:28:55 -0500 (Tue, 17 Mar 2009) | 52 lines
Merged revisions 182810 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r182810 | russell | 2009-03-17 21:09:13 -0500 (Tue, 17 Mar 2009) | 44 lines
Fix cases where the internal poll() was not being used when it needed to be.
We have seen a number of problems caused by poll() not working properly on
Mac OSX. If you search around, you'll find a number of references to using
select() instead of poll() to work around these issues. In Asterisk, we've
had poll.c which implements poll() using select() internally. However, we
were still getting reports of problems.
vadim investigated a bit and realized that at least on his system, even
though we were compiling in poll.o, the system poll() was still being used.
So, the primary purpose of this patch is to ensure that we're using the
internal poll() when we want it to be used.
The changes are:
1) Remove logic for when internal poll should be used from the Makefile.
Instead, put it in the configure script. The logic in the configure
script is the same as it was in the Makefile. Ideally, we would have
a functionality test for the problem, but that's not actually possible,
since we would have to be able to run an application on the _target_
system to test poll() behavior.
2) Always include poll.o in the build, but it will be empty if AST_POLL_COMPAT
is not defined.
3) Change uses of poll() throughout the source tree to ast_poll(). I feel
that it is good practice to give the API call a new name when we are
changing its behavior and not using the system version directly in all cases.
So, normally, ast_poll() is just redefined to poll(). On systems where
AST_POLL_COMPAT is defined, ast_poll() is redefined to ast_internal_poll().
4) Change poll() in main/poll.c to be ast_internal_poll().
It's worth noting that any code that still uses poll() directly will work fine
(if they worked fine before). So, for example, out of tree modules that are
using poll() will not stop working or anything. However, for modules to work
properly on Mac OSX, ast_poll() needs to be used.
(closes issue #13404)
Reported by: agalbraith
Tested by: russell, vadim
http://reviewboard.digium.com/r/198/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@182945 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r182722 | jpeeler | 2009-03-17 15:47:31 -0500 (Tue, 17 Mar 2009) | 15 lines
Allow H.323 Plus library to be used in addition to the OpenH323 library
Chan_h323 can now be compiled against both the previously supported versions of
OpenH323 as well as the current H.323 Plus (version 1.20.2). The configure
script has been modified to look in the default install location of h323 to
hopefully help avoid using the environment variables OPENH323DIR and PWLIBDIR.
Also, the CLI command "h323 show version" has been added which indicates which
version of h323 is in use.
(closes issue #11261)
Reported by: vhatz
Patches:
asterisk-1.6.0.6-h323plus.patch uploaded by jthurman (license 614)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@182723 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r182282 | dvossel | 2009-03-16 12:49:58 -0500 (Mon, 16 Mar 2009) | 13 lines
Merged revisions 182281 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r182281 | dvossel | 2009-03-16 12:47:42 -0500 (Mon, 16 Mar 2009) | 7 lines
Randomize IAX2 encryption padding
The 16-32 byte random padding at the beginning of an encrypted IAX2 frame turns out to not be all that random at all. This patch calls ast_random to fill the padding buffer with random data. The padding is randomized at the beginning of every encrypted call and for every encrypted retransmit frame.
Review: http://reviewboard.digium.com/r/193/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@182283 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r182022 | file | 2009-03-13 14:25:09 -0300 (Fri, 13 Mar 2009) | 7 lines
Fix an issue with requesting a T38 reinvite before the call is answered.
The code responsible for sending the T38 reinvite did not check if an INVITE was
already being handled. This caused things to get confused and the call to fail.
The code now defers sending the T38 reinvite until the current INVITE is done being
handled.
(issue AST-191)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@182036 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r181769 | mmichelson | 2009-03-12 13:30:58 -0500 (Thu, 12 Mar 2009) | 28 lines
Merged revisions 181768 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r181768 | mmichelson | 2009-03-12 13:29:48 -0500 (Thu, 12 Mar 2009) | 22 lines
Properly send a 487 on an INVITE we have not responded to if we receive a BYE.
If we receive an INVITE from an endpoint and then later receive a BYE from that
same endpoint before we have sent a final response for the INVITE, then we need
to respond to the INVITE with a 487.
There was logic in the code prior to this commit which seemed to exist solely to
handle this situation, but there was one condition in an if statement which
was incorrect. The only way we would send a 487 was if the sip_pvt had no owner
channel. This made no sense since we created the owner channel when we received
the INVITE, meaning that the majority of the time we would never send the 487.
The 487 being sent should not rely on whether we have created a channel. Its
delivery should be dependent on the current state of the initial INVITE transaction.
With this commit, that logic is now correctly in place.
(closes issue #14149)
Reported by: legranjl
Patches:
14149.patch uploaded by mmichelson (license 60)
Tested by: legranjl
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@181770 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r181371 | dvossel | 2009-03-11 12:34:57 -0500 (Wed, 11 Mar 2009) | 17 lines
Merged revisions 181340 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r181340 | dvossel | 2009-03-11 12:25:31 -0500 (Wed, 11 Mar 2009) | 11 lines
encrypted IAX2 during packet loss causes decryption to fail on retransmitted frames
If an iax channel is encrypted, and a retransmit frame is sent, that packet's iseqno is updated while it is encrypted. This causes the entire frame to be corrupted. When the corrupted frame is sent, the other side decrypts it and sends a VNAK back because the decrypted frame doesn't make any sense. When we get the VNAK, we look through the sent queue and send the same corrupted frame causing a loop. To fix this, encrypted frames requiring retransmission are decrypted, updated, then re-encrypted. Since key-rotation may change the key held by the pvt struct, the keys used for encryption/decryption are held within the iax_frame to guarantee they remain correct.
(closes issue #14607)
Reported by: stevenla
Tested by: dvossel
Review: http://reviewboard.digium.com/r/192/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@181372 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r181345 | file | 2009-03-11 14:26:40 -0300 (Wed, 11 Mar 2009) | 21 lines
Merged revisions 181328 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r181328 | file | 2009-03-11 14:22:52 -0300 (Wed, 11 Mar 2009) | 14 lines
Fix issue where an attended transfer could not be completed under a rare scenario.
When completing an attended transfer chan_sip does a check to make sure the extension
in the URI portion of the Refer-To header is a local valid extension. We don't actually
need to check this since we know for sure the other channel is already up and talking to
the extension. Some devices do not put the extension in the Refer-To header either, which
can cause the extension check to fail. We now no longer do this check if it is an attended
transfer.
(closes issue #14628)
Reported by: sverre
Patches:
14628.diff uploaded by file (license 11)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@181352 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r181296 | file | 2009-03-11 13:40:48 -0300 (Wed, 11 Mar 2009) | 16 lines
Merged revisions 181295 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r181295 | file | 2009-03-11 13:36:50 -0300 (Wed, 11 Mar 2009) | 9 lines
Fix a problem with inband DTMF detection on outgoing SIP calls when dtmfmode=auto.
When dtmfmode was set to auto the inband DTMF detector was not setup
on outgoing SIP calls. This caused inband DTMF detection to fail.
The inband DTMF detector is now setup for both dtmfmode inband and auto.
(closes issue #13713)
Reported by: makoto
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@181297 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r181135 | jpeeler | 2009-03-10 23:06:44 -0500 (Tue, 10 Mar 2009) | 20 lines
Fix malloc debug macros to work properly with h323.
The main problem here was that cstdlib was undefining free thereby causing the
proper debug macros to not be used. ast_h323.cxx has been changed to call
ast_free instead to avoid the issue.
A few other issues were addressed:
- There were a few instances of functions improperly passing ast_free instead
of ast_free_ptr.
- Some clean up was done to avoid the debug macros intentionally being redefined.
(copied below from Kevin's commit, appreciate the help)
- disable astmm.h from doing anything when STANDALONE is defined, which is used
by the tools in the utils/ directory that use parts of Asterisk header files in
hackish ways; also ensure that utils/extconf.c and utils/conf2ael.c are
compiled with STANDALONE defined.
(closes issue #13593)
Reported by: pj
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@181137 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r151464 | mmichelson | 2008-10-21 18:54:41 -0500 (Tue, 21 Oct 2008) | 11 lines
Make the sip_standard_port function more granular by allowing separate
type and port arguments. This is necessary because when building our From
and Contact headers, we need to be absolutely sure that we are placing our
source port there and not the peer's source port.
(closes issue #12761)
Reported by: asbestoshead
Patches:
patch-chan-sip-contact-port.txt uploaded by asbestoshead (license 455)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@179473 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r179219 | mmichelson | 2009-03-01 15:45:08 -0600 (Sun, 01 Mar 2009) | 18 lines
Properly free memory and remove scheduler entries when a transmission failure occurs.
Previously, only the "data" field of the sip_pkt created during __sip_reliable_xmit
was freed when XMIT_FAILURE was returned by __sip_xmit. When retrans_pkt was called,
this inevitably resulted in the reading and writing of freed memory.
XMIT_FAILURE is a condition meaning that we don't want to attempt resending the packet
at all. The proper action to take is to remove the scheduler entry we just created,
free the packet's data as well as the packet itself, and unlink it from the list of
packets on the sip_pvt structure.
(closes issue #14455)
Reported by: Nick_Lewis
Patches:
14455.patch uploaded by mmichelson (license 60)
Tested by: Nick_Lewis
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@179220 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r178767 | dvossel | 2009-02-26 09:50:22 -0600 (Thu, 26 Feb 2009) | 8 lines
IAX2 prune realtime fix
Iax2 prune realtime had issues. If "iax2 prune realtime all" was called, it would appear like the command was successful, but in reality nothing happened. This is because the reload that was supposed to take place checks the config files, sees no changes, and does nothing. If there had been a change in the the config file, the realtime users would have been marked for deletion and everything would have been fine. Now prune_users() and prune_peers() are called instead of reload_config() to prune all users/peers that are realtime. These functions remove all users/peers with the rtfriend and delme flags set. iax2_prune_realtime() also lacked the code to properly delete a single friend. For example. if iax2 prune realtime <friend> was called, only the peer instance would be removed. The user would still remain.
(closes issue #14479)
Reported by: mousepad99
Review: http://reviewboard.digium.com/r/176/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@178768 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r178213 | file | 2009-02-24 11:18:38 -0400 (Tue, 24 Feb 2009) | 16 lines
Merged revisions 178205 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r178205 | file | 2009-02-24 11:16:07 -0400 (Tue, 24 Feb 2009) | 9 lines
Skip check for extension when subscribing for MWI.
Since the remote side is not actually subscribing to a specific extension when
subscribing for MWI just skip the check to see if the extension exists. They can't use it
to specify the mailbox either since we require configuration of that in sip.conf
(closes issue #14531)
Reported by: festr
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@178224 65c4cc65-6c06-0410-ace0-fbb531ad65f3
During iax2 call negotiation, supported codecs are passed in an Information Element containing a 2 byte field where each bit correlates to a specific codec. In 1.6 only audio codec bits 0-12 and 15 are defined, leaving bits 13-14 undefined. By default all bits are enabled unless specified otherwise. Since its a 2 byte field and 13-14 are not defined, these bits are never turned off. In trunk, bits 13-14 are defined, which means 1.6 is advertising support for codecs it does not have when talking to trunk. I fixed this by adding #define for undefined audio codec bits. These bits are then removed from iax2's full bandwidth capabilities.
(closes issue #14283)
Reported by: jcovert
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@177698 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r177162 | jpeeler | 2009-02-18 14:11:57 -0600 (Wed, 18 Feb 2009) | 14 lines
Modify h323 to build against PTLib as well as the older PWLib
Several changes in PTLib have occurred requiring build time detection. Changes
accounted for include the library name change, config option change, install
location change, and a boolean type change which is handled by ast_ptlib.h.
Also, the sed check has been modified to properly work with autoconf >= 2.62.
(closes issue #14224)
Reported by: bergolth
Patches:
asterisk-autoconf-sed.patch uploaded by bergolth (license 661)
asterisk-pwlib-v3.patch uploaded by bergolth (license 661)
Tested by: jpeeler
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@177163 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r176705 | dhubbard | 2009-02-17 15:59:38 -0600 (Tue, 17 Feb 2009) | 11 lines
create a UDPTL structure in create_addr_from_peer() if it does not already exist for T38
This is required to create a UDPTL structure in create_addr_from_peer() to handle the
scenario where 't38pt_udptl=yes' is not defined in the [general] section of sip.conf but
is defined the peer's context. I tested this patch by enabling t38pt_udptl in the
[general] section on one system and only enabling t38pt_udptl in a peer's context on
the system sending a fax. Without the patch, the sending system will fail to initiate
T38 negotiation with the warning message, "No way to add SDP without an UDPTL structure".
When this patch is applied the sending side will successfully initiate T38 negotiation.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@176709 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r176642 | tilghman | 2009-02-17 15:14:18 -0600 (Tue, 17 Feb 2009) | 8 lines
Prior to masquerade, move the group definitions to the channel performing the
masq, so that the group count lingers past the bridge.
(closes issue #14275)
Reported by: kowalma
Patches:
20090216__bug14275.diff.txt uploaded by Corydon76 (license 14)
Tested by: kowalma
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@176643 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r176459 | tilghman | 2009-02-16 19:58:39 -0600 (Mon, 16 Feb 2009) | 17 lines
Merged revisions 176426 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r176426 | tilghman | 2009-02-16 18:49:22 -0600 (Mon, 16 Feb 2009) | 10 lines
After a 'sip reload', qualifies for realtime peers weren't immediately
restarted, instead waiting until the next registration. We're now
caching the qualify across a reload/restart and starting the qualify
immediately upon loading the peer.
(closes issue #14196)
Reported by: pdf
Patches:
20090120__bug14196_1.4.diff.txt uploaded by pdf (license 663)
Tested by: pdf
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@176460 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r176355 | dvossel | 2009-02-16 17:33:55 -0600 (Mon, 16 Feb 2009) | 13 lines
Merged revisions 176354 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r176354 | dvossel | 2009-02-16 17:30:52 -0600 (Mon, 16 Feb 2009) | 8 lines
Fixes issue with AST_CONTROL_SRCUPDATE not being relayed correctly during bridging
This should have been committed with rev176247, but I missed it. srcupdate frames no longer break out of the native bridge, but are not being sent to the other call leg either. This fixs that.
issue #13749
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@176359 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r176248 | dvossel | 2009-02-16 15:30:17 -0600 (Mon, 16 Feb 2009) | 11 lines
Merged revisions 175597 via svnmerge from
https://origsvn.digium.com/svn/asterisk/trunk
........
r175597 | dvossel | 2009-02-13 14:11:55 -0600 (Fri, 13 Feb 2009) | 4 lines
Fixed iax2 key rotation backwards compatibility
Turns key rotation back on by default. Added bit into encryption IE to indicate whether or not key rotation is supported or not. If it is not supported then it is not enabled, which insures backwards compatibility. This eliminates the need for the keyrotate option in iax.conf, so it has been removed.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@176250 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r176030 | file | 2009-02-16 11:36:19 -0400 (Mon, 16 Feb 2009) | 16 lines
Merged revisions 176029 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r176029 | file | 2009-02-16 11:33:53 -0400 (Mon, 16 Feb 2009) | 9 lines
Don't have the Via header stored as a stringfield as it can change often during the lifetime of a dialog.
This issue crept up with subscriptions on the AA50. When an outgoing NOTIFY is sent a new branch value
is created and the Via header is changed to reflect it. Since this was a stringfield a new spot in the
pool was used for the value while the old was left untouched/unused. If the current pool was full a new
pool was created. This would cause memory usage to increase steadily.
(issue #AA50-2332)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@176031 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r174543 | file | 2009-02-10 11:37:07 -0400 (Tue, 10 Feb 2009) | 6 lines
Make the logic for inuse and inringing manipluation match that of 1.4. The old broken logic would reset the values back to 0 during certain scenarios causing the wrong state to be reported.
(closes issue #14399)
Reported by: caspy
(issue #13238)
Reported by: kowalma
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@174544 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r174301 | mmichelson | 2009-02-09 11:20:55 -0600 (Mon, 09 Feb 2009) | 20 lines
Merged revisions 174282 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r174282 | mmichelson | 2009-02-09 11:11:05 -0600 (Mon, 09 Feb 2009) | 12 lines
Don't do an SRV lookup if a port is specified
RFC 3263 says to do A record lookups on a hostname
if a port has been specified, so that's what we're
going to do. See section 4.2.
(closes issue #14419)
Reported by: klaus3000
Patches:
patch_chan_sip_nosrvifport_1.4.23.txt uploaded by klaus3000 (license 65)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@174322 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r174084 | dhubbard | 2009-02-06 17:51:56 -0600 (Fri, 06 Feb 2009) | 13 lines
Merged revisions 174082 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r174082 | dhubbard | 2009-02-06 17:36:03 -0600 (Fri, 06 Feb 2009) | 5 lines
check ast_strlen_zero() before calling ast_strdupa() in sip_uri_headers_cmp()
and sip_uri_params_cmp()
The reporter didn't actually upload a properly-formed patch, instead a
modified chan_sip.c file was uploaded. I created a patch to determine the
changes, then modified the suggested changes to create a proper fix. The
summary above is a complete description of the changes.
(closes issue #13547)
Reported by: tecnoxarxa
Patches:
chan_sip.c.gz uploaded by tecnoxarxa (license 258)
Tested by: tecnoxarxa
........
................
------------------------------------------------------------------------
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@174085 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r174041 | file | 2009-02-06 15:28:53 -0400 (Fri, 06 Feb 2009) | 4 lines
Don't subscribe to a mailbox on pseudo channels. It is futile. This solves an issue where duplicated pseudo channels would cause a crash because the first one would unsubscribe and the next one would also try to unsubscribe the same subscription.
(closes issue #14322)
Reported by: amessina
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@174042 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r173974 | file | 2009-02-06 13:18:35 -0400 (Fri, 06 Feb 2009) | 15 lines
Merged revisions 173967-173968 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r173967 | file | 2009-02-06 13:14:15 -0400 (Fri, 06 Feb 2009) | 4 lines
Some clients do not put the call-id for replaces at the beginning, so support it being anywhere in the string.
(closes issue #14350)
Reported by: fhackenberger
........
r173968 | file | 2009-02-06 13:15:01 -0400 (Fri, 06 Feb 2009) | 2 lines
Remove a debug message I put in by accident.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@173986 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Fixes issue with IAX2 transfers not taking place. As it was, a call that was being transfered would never be handed off correctly to the call ends because of how call numbers were stored in a hash table. The hash table, "iax_peercallno_pvt", storing all the current call numbers did not take into account the complications associated with transferring a call, so a separate hash table was required. This second hash table "iax_transfercallno_pvt" handles calls being transfered, once the call transfer is complete the call is removed from the transfer hash table and added to the peer hash table resuming normal operations. Addition functions were created to handle storing, removing, and comparing items in the iax_transfercallno_pvt table.
(issue #13468)
Review: http://reviewboard.digium.com/r/140/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@173250 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r172400 | rmudgett | 2009-01-29 14:38:34 -0600 (Thu, 29 Jan 2009) | 12 lines
channels/chan_dahdi.c
* Added doxygen comments to the major dahdi structures.
* Fixed PRI and SS7 using an incorrect string value if the extension
delimiter is not present in the Dial() function.
* Fixed SS7 not checking if the dialed extension is at least as long
as the stripmsd option.
* Fixed PRI not handling unknown TON/NPI prefix letters correctly.
* Fixed some uninitialized string variables on FXS ports.
configs/chan_dahdi.conf.sample
* Updated some documentation.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@172434 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r172173 | oej | 2009-01-29 10:18:01 +0100 (Tor, 29 Jan 2009) | 24 lines
Merged revisions 172169 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r172169 | oej | 2009-01-29 09:48:18 +0100 (Tor, 29 Jan 2009) | 16 lines
Make sure that we always add the hangupcause headers. In some cases, the owner was disconnected before we checked for the cause.
This patch implements a temporary storage in the pvt and use that instead.
The code is based on ideas from code from Adomjan in issue #13385 (Add support for Reason: header)
Thanks to Klaus Darillion for testing!
(closes issue #14294)
related to issue #13385
Reported by: klaus3000 and adomjan
Patches:
bug14294b.diff uploaded by oej (license 306)
Based on 20080829_chan_sip.c-q850reason_header.patch uploaded by adomjan (license 487)
Tested by: oej, klaus3000
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@172217 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r171691 | mmichelson | 2009-01-27 15:58:39 -0600 (Tue, 27 Jan 2009) | 47 lines
Merged revisions 171689 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r171689 | mmichelson | 2009-01-27 15:55:08 -0600 (Tue, 27 Jan 2009) | 39 lines
Fix devicestate problems for "always-on" agent channels
A revision to chan_agent attempted to "inherit" the device
state of the underlying channel in order to report the
device state of an agent channel more accurately.
The problem with the logic here is that it makes no sense to
use this for always-on agents. If the agent is logged in, then
to the underlying channel, the agent will always appear to be
"in use," no matter if the agent is on a call or not. The reason
is that to the underlying channel, the channel is currently in use
on a call to the AgentLogin application.
The most common cause that I found for this issue to occur was for
a SIP channel to be the underlying channel type for an Agent channel.
If the SIP phone re-registers, then the registration will cause the
device state core to query the device state of the SIP channel. Since the
SIP channel is in use, the Agent channel would also inherit this status.
Once the agent channel was set to "in use" there was no way that the device
state could change on that channel unless the agent logged out.
The solution for this problem is a bit different in 1.4 than it is in the
other branches. In 1.4, there will be a one-line fix to make sure that only
callback agents will inherit device state from their underlying channel type.
For the other branches of Asterisk, since callback support has been removed, there
is also no need for device state inheritance in chan_agent, so I will simply be
removing it from the code.
In addition, the 1.4 source is getting a new comment to help the next person who
edits chan_agent.c. I'm adding a comment that a agent_pvt's loginchan field may be
used to determine if the agent is a callback agent or not.
(closes issue #14173)
Reported by: nathan
Patches:
14173.patch uploaded by putnopvut (license 60)
Tested by: nathan, aramirez
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@171692 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r171528 | oej | 2009-01-27 16:00:19 +0100 (Tis, 27 Jan 2009) | 23 lines
Solving the same issue, but a bit different in trunk...
Merged revisions 171527 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r171527 | oej | 2009-01-27 15:33:20 +0100 (Tis, 27 Jan 2009) | 13 lines
Use the same branch tag in CANCEL as in INVITE
Originally putnopvut implemented some changes in revision 142079 that according to the bug report seemed to have worked then, but somehow fails now.
I guess code, as humans, get old and forget stuff. Anyway, this bug caused CANCEL not to work with picky systems.
Thanks Fredrik for pointing out where the bug in the SIP messaging was.
(closes issue #14346)
Reported by: oej
Patches:
bug14346.diff uploaded by oej (license 306)
Tested by: oej
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@171529 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Russell Bryant
Richard Mudgett
Mark Michelson
Joshua Colp
Matthew Fredrickson
David Vossel
Matthew Nicholson
David Brooks
Kevin P. Fleming
Eliel C. Sardanons
Sean Bright
Tilghman Lesher
Jeff Peeler
Doug Bailey
Leif Madsen
Dwayne M. Hubbard
Michiel van Baak
Philippe Sultan
Olle Johansson