https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89559 | tilghman | 2007-11-25 11:17:10 -0600 (Sun, 25 Nov 2007) | 14 lines
We previously attempted to use the ESCAPE clause to set the escape delimiter to
a backslash. Unfortunately, this does not universally work on all databases,
since on databases which natively use the backslash as a delimiter, the
backslash itself needs to be delimited, but on other databases that have no
delimiter, backslashing the backslash causes an error.
So the only solution that I can come up with is to create an option in res_odbc
that explicitly specifies whether or not backslash is a native delimiter. If
it is, we use it natively; if not, we use the ESCAPE clause to make it one.
Reported by: elguero
Patch by: tilghman
(Closes issue #11364)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89561 65c4cc65-6c06-0410-ace0-fbb531ad65f3
and we now have the groupcount system to implement call-limits in the dialplan. You
can use the "setvar" option in realtime/sip.conf to set limits per device.
- Implement "callcounter" as a new option to enable the call counting we need to
report device status to queue, manager and SIP subscriptions.
The call counter setting is now enabled in the code by setting the device call-limit
to 999. When we remove the call limit, we can simply enable this with a boolean
setting.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89554 65c4cc65-6c06-0410-ace0-fbb531ad65f3
way of handling DTMF in SIP. Totally undocumented, but implemented
in enough devices so we have to support it.
Code by sergee, small changes by oej.
Closes issue #11049
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89278 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89173 | crichter | 2007-11-12 12:26:48 +0100 (Mo, 12 Nov 2007) | 1 line
if we're NT and no number was dialed and overlapdial is set, we wait for the ISDN timeout instead of starting our own timer. added a comment for the misdn.conf.sample for the overlapdial config option.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89179 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89169 | crichter | 2007-11-12 10:45:36 +0100 (Mo, 12 Nov 2007) | 1 line
aded ntkeepcalls option, to avoid droÃpping calls when the L2 goes down on a PTP link. There are some pbx which do turn off the L1 for a very short while and restart it immediately. normally T310 should be started and after 10 seconds or so the calls should be dropped, this is a simple fix wihtout this timer.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89174 65c4cc65-6c06-0410-ace0-fbb531ad65f3
It was mistakenly deleted in 1.4 without ever being merged to trunk.
Reported by eliel on #asterisk-dev.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89132 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This introduces a new channel driver, chan_unistim, that supports the Unistim
VoIP protocol for Nortel phones. The following models have been confirmed
to work: i2002, i2004 and i2050.
(closes issue #8864)
Reported by: c_hans
Patches:
chan_unistim.patch uploaded by c (license 304)
ustm_no_conf.diff uploaded by junky (license 177)
Tested by: c_hans, dbowerman, math, junky, loloski
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@88368 65c4cc65-6c06-0410-ace0-fbb531ad65f3
phones to be rung in a specific order.
(closes issue #7279, reported and initially patched by diLLec, patch reworked by me)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@87154 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: ruffle
Patches:
app_voicemail.c.diff uploaded by ruffle (license 201)
10739-moveheard.diff uploaded by qwell (license 4)
Tested by: callguy, ruffle
Add an option to disable the automatic moving of "heard" messages to the Old folder.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@82871 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: snar
Patches:
app-queue-cdr-trunk.patch uploaded by snar (license 245)
queues.conf.patch uploaded by snar (license 245)
Add an updatecdr option to queues.conf, so that if a "member name" is specified,
the cdr record will be updated with that, rather than the channel.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@82800 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: junky
Patches:
register_trying.diff.txt uploaded by jcmoore
Disable sending 100 Trying on REGISTER attempts and make it an option. This has been signed off by oej.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@82257 65c4cc65-6c06-0410-ace0-fbb531ad65f3
+ extensive documentation changes both in sip.conf.sample and in the source;
+ allow "externip" and "externhost" to include a port number as well;
+ allow "bindaddr" to have a port number (making bindport unnecessary,
even though it is still present for backward compatibility);
+ introduce the new "stunaddr" parameter to specify an STUN server to
be used from the main SIP socket;
+ extend the "sip show settings" output to show all the above.
Internally:
+ change related data structures from struct in_addr to struct sockaddr_in
to store the port numbers as well;
+ reorganize ast_sip_ouraddrfor() (should also be renamed to sip_ouraddrfor()
because it is not a generic API, though it might become so if called with
a socket as an additional argument, in which case it can be moved elsewhere).
As mentioned in the documentation, media sessions still do not use STUN so the
port numbers may still be incorrect when Asterisk is behind a NAT
On passing, some of the debugging messages printing media addresses are
probably using the wrong values, but this will be checked/fixed in a
subsequent commit if needed.
Part of the following chunk in the function that handles a "sip reload" is
probably needed on previous versions as well, to avoid leaking the memory
used for the "localaddr" list:
@@ -17244,13 +17274,17 @@
/* Reset IP addresses */
memset(&bindaddr, 0, sizeof(bindaddr));
+ memset(&stunaddr, 0, sizeof(stunaddr));
+ memset(&internip, 0, sizeof(internip));
+ /* Free memory for local network address mask */
+ ---> ast_free_ha(localaddr); <-----
memset(&localaddr, 0, sizeof(localaddr));
memset(&externip, 0, sizeof(externip));
memset(&default_prefs, 0 , sizeof(default_prefs));
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@76221 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This feature may be turned on by adding imapgreetings=yes to the general section of voicemail.conf
voicemail.conf.sample has details on the options added.
As a result, IMAP storage now has RETRIEVE and DISPOSE macros defined.
In addition to the IMAP greeting changes, I also have added an enum for the voicemail folders
and so now the code should be easier to understand and maintain when it comes to this area.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@72232 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Also adds a new "reporting" permission for manager, since it can be incredibly spammy.
This permission was discussed on the -dev mailing list some months back.
Issue 8613, patch by johann8384, with some minor changes by me.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@70961 65c4cc65-6c06-0410-ace0-fbb531ad65f3
disclaimer along with SIP messages in the header, X-Disclaimer. This is off by
default. Also, the text of the disclaimer can be customized in sip.conf.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@66777 65c4cc65-6c06-0410-ace0-fbb531ad65f3
features.conf. This allows you to create a feature one time, and then map it
into groups for various different key mappings for the same feature, as well
as easy access control to groups of features.
(patch from bbryant)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@66774 65c4cc65-6c06-0410-ace0-fbb531ad65f3
class in musiconhold.conf, a caller on hold may press this digit to switch
to listening to that music class.
This involved adding a new callback for generators, which allow generators
to get notified of DTMF from the channel they are running on. Then, a callback
was implemented for the music on hold generators.
(patch from bbryant)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@65505 65c4cc65-6c06-0410-ace0-fbb531ad65f3
add some new options to control what happens when you hangup on an attended
transfer before the target extension answers the transferred channel. You
can now have it send the transferee back to the transferer.
(issue #8413, patch from sergee with very minor modifications by me)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@62593 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This set of changes introduces a new generic event API for use within Asterisk.
I am still working on a way for events to be shared between servers, but this
part is ready and can already be used inside of Asterisk.
This set of changes introduces the first use of the API, as well. I have
restructured the way that MWI (message waiting indication) is handled. It is
now event based instead of polling based. For example, if there are a bunch
of SIP phones subscribed to mailboxes, then chan_sip will not have to
constantly poll the mailboxes for changes. app_voicemail will generate events
when changes occur.
See UPGRADE.txt and CHANGES for some more information on the effects of these
changes from the user perspective. For developer information, see the text in
include/asterisk/event.h.
As always, additional feedback is welcome on the asterisk-dev mailing list.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@62292 65c4cc65-6c06-0410-ace0-fbb531ad65f3
minimum amount of time between queue announcements for use when the caller's queue
position changes frequently.
(issue #9604, patch by Matthew Roth)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@62242 65c4cc65-6c06-0410-ace0-fbb531ad65f3
blocks instead of one large monolithic app. Supports multiple templates
and is designed mostly for voicemail delivery over e-mail.
There's a todo with a list of ideas in the source code if you want
to contribute. Feedback is appreciated!
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@61671 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r60603 | russell | 2007-04-06 15:58:43 -0500 (Fri, 06 Apr 2007) | 13 lines
To be able to achieve the things that we would like to achieve with the
Asterisk GUI project, we need a fully functional HTTP interface with access
to the Asterisk manager interface. One of the things that was intended to be
a part of this system, but was never actually implemented, was the ability for
the GUI to be able to upload files to Asterisk. So, this commit adds this in
the most minimally invasive way that we could come up with.
A lot of work on minimime was done by Steve Murphy. He fixed a lot of bugs in
the parser, and updated it to be thread-safe. The ability to check
permissions of active manager sessions was added by Dwayne Hubbard. Then,
hacking this all together and do doing the modifications necessary to the HTTP
interface was done by me.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@60604 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Tilghman Lesher
Olle Johansson
Steve Murphy
Russell Bryant
Mark Michelson
Christian Richter
Jason Parker
Joshua Colp
Kevin P. Fleming
Matthew Fredrickson
Philippe Sultan
Dwayne M. Hubbard
Luigi Rizzo
Pari Nannapaneni