160 Commits (cf0f1829fb07d1400017a575765bc2ba9e8717a0)

Author	SHA1	Message	Date
Michael Neuhauser	37c16f9eef	res_pjsip: delay contact pruning on Asterisk start ... Move the call to ast_sip_location_prune_boot_contacts() *after* the call to ast_res_pjsip_init_options_handling() so that res/res_pjsip/pjsip_options.c is informed about the contact deletion and updates its sip_options_contact_statuses list. This allows for an AMI event to be sent by res/res_pjsip/pjsip_options.c if the endpoint registers again from the same remote address and port (i.e., same URI) as used before the Asterisk restart. ASTERISK-30109 Reported-by: Michael Neuhauser Change-Id: I1ba4478019e4931a7085f62708d9b66837e901a8	3 years ago
George Joseph	1fa568e76f	Geolocation: chan_pjsip Capability Preview ... This commit adds res_pjsip_geolocation which gives chan_pjsip the ability to use the core geolocation capabilities. This commit message is intentionally short because this isn't a simple capability. See the documentation at https://wiki.asterisk.org/wiki/display/AST/Geolocation for more information. THE CAPABILITIES IMPLEMENTED HERE MAY CHANGE BASED ON USER FEEDBACK! ASTERISK-30128 Change-Id: Ie2e2bcd87243c2cfabc43eb823d4427c7086f4d9	3 years ago
Trevor Peirce	5f0581c5f5	res_pjsip: Actually enable session timers when timers=always ... When a pjsip endpoint is defined with timers=always, this has been a functional noop. This patch correctly sets the feature bitmap to both enable support for session timers and to enable them even when the endpoint itself does not request or support timers. ASTERISK-29603 Reported-By: Ray Crumrine Change-Id: I8b5eeaa9ec7f50cc6d96dd34c2b4aa9c53fb5440	3 years ago
Ben Ford	0724b767a3	AST-2022-002 - res_stir_shaken/curl: Add ACL checks for Identity header. ... Adds a new configuration option, stir_shaken_profile, in pjsip.conf that can be specified on a per endpoint basis. This option will reference a stir_shaken_profile that can be configured in stir_shaken.conf. The type of this option must be 'profile'. The stir_shaken option can be specified on this object with the same values as before (attest, verify, on), but it cannot be off since having the profile itself implies wanting STIR/SHAKEN support. You can also specify an ACL from acl.conf (along with permit and deny lines in the object itself) that will be used to limit what interfaces Asterisk will attempt to retrieve information from when reading the Identity header. ASTERISK-29476 Change-Id: I87fa61f78a9ea0cd42530691a30da3c781842406	4 years ago
Alexander Traud	ecffdab059	stir/shaken: Avoid a compiler extension of GCC. ... ASTERISK-29776 Change-Id: I86e5eca66fb775a5744af0c929fb269e70575a73	4 years ago
Josh Soref	9ae9893c63	res: Spelling fixes ... Correct typos of the following word families: identifying structures actcount initializer attributes statement enough locking declaration userevent provides unregister session execute searches verification suppressed prepared passwords recipients event because brief unidentified redundancy character the module reload operation backslashes accurate incorrect collision initializing instance interpreted buddies omitted manually requires queries generator scheduler configuration has owner resource performed masquerade apparently routable ASTERISK-29714 Change-Id: I88485116d2c59b776aa2e1f8b4ce8239a21decda	4 years ago
Ben Ford	1031a1805b	STIR/SHAKEN: Option split and response codes. ... The stir_shaken configuration option now has 4 different choices to pick from: off, attest, verify, and on. Off and on behave the same way they do now. Attest will only perform attestation on the endpoint, and verify will only perform verification on the endpoint. Certain responses are required to be sent based on certain conditions for STIR/SHAKEN. For example, if we get a Date header that is outside of the time range that is considered valid, a 403 Stale Date response should be sent. This and several other responses have been added. Change-Id: I4ac1ecf652cd0e336006b0ca638dc826b5b1ebf7	4 years ago
Matthew Kern	5e9799a42e	res_pjsip_t38: bind UDPTL sessions like RTP ... In res_pjsip_sdp_rtp, the bind_rtp_to_media_address option and the fallback use of the transport's bind address solve problems sending media on systems that cannot send ipv4 packets on ipv6 sockets, and certain other situations. This change extends both of these behaviors to UDPTL sessions as well in res_pjsip_t38, to fix fax-specific problems on these systems, introducing a new option endpoint/t38_bind_udptl_to_media_address. ASTERISK-29402 Change-Id: I87220c0e9cdd2fe9d156846cb906debe08c63557	4 years ago
George Joseph	9cc1d6fc22	res_pjsip_outbound_authenticator_digest: Be tolerant of RFC8760 UASs ... RFC7616 and RFC8760 allow more than one WWW-Authenticate or Proxy-Authenticate header per realm, each with different digest algorithms (including new ones like SHA-256 and SHA-512-256). Thankfully however a UAS can NOT send back multiple Authenticate headers for the same realm with the same digest algorithm. The UAS is also supposed to send the headers in order of preference with the first one being the most preferred. We're supposed to send an Authorization header for the first one we encounter for a realm that we can support. The UAS can also send multiple realms, especially when it's a proxy that has forked the request in which case the proxy will aggregate all of the Authenticate headers and then send them all back to the UAC. It doesn't stop there though... Each realm can require a different username from the others. There's also nothing preventing each digest algorithm from having a unique password although I'm not sure if that adds any benefit. So now... For each Authenticate header we encounter, we have to determine if we support the digest algorithm and, if not, just skip the header. We then have to find an auth object that matches the realm AND the digest algorithm or find a wildcard object that matches the digest algorithm. If we find one, we add it to the results vector and read the next Authenticate header. If the next header is for the same realm AND we already added an auth object for that realm, we skip the header. Otherwise we repeat the process for the next header. In the end, we'll have accumulated a list of credentials we can pass to pjproject that it can use to add Authentication headers to a request. NOTE: Neither we nor pjproject can currently handle digest algorithms other than MD5. We don't even have a place for it in the ast_sip_auth object. For this reason, we just skip processing any Authenticate header that's not MD5. When we support the others, we'll move the check into the loop that searches the objects. Changes: * Added a new API ast_sip_retrieve_auths_vector() that takes in a vector of auth ids (usually supplied on a call to ast_sip_create_request_with_auth()) and populates another vector with the actual objects. * Refactored res_pjsip_outbound_authenticator_digest to handle multiple Authenticate headers and set the stage for handling additional digest algorithms. * Added a pjproject patch that allows them to ignore digest algorithms they don't support. This patch has already been merged upstream. * Updated documentation for auth objects in the XML and in pjsip.conf.sample. * Although res_pjsip_authenticator_digest isn't affected by this change, some debugging and a testsuite AMI event was added to facilitate testing. Discovered during OpenSIPit 2021. ASTERISK-29397 Change-Id: I3aef5ce4fe1d27e48d61268520f284d15d650281	5 years ago
Sean Bright	4a843e00ef	res_pjsip.c: OPTIONS processing can now optionally skip authentication ... ASTERISK-27477 #close Change-Id: I68f6715bba92a525149e35d142a49377a34a1193	5 years ago
Joshua C. Colp	dcd2ed69a3	res_pjsip: Adjust outgoing offer call pref. ... This changes the outgoing offer call preference default option to match the behavior of previous versions of Asterisk. The additional advanced codec negotiation options have also been removed from the sample configuration and marked as reserved for future functionality in XML documentation. The codec preference options have also been fixed to enforce local codec configuration. ASTERISK-29109 Change-Id: Iad19347bd5f3d89900c15ecddfebf5e20950a1c2	5 years ago
Torrey Searle	888090ab18	res_pjsip_diversion: implement support for History-Info ... Implemention of History-Info capable of interworking with Diversion Header following RFC7544 ASTERISK-29027 #close Change-Id: I2296369582d4b295c5ea1e60bec391dd1d318fa6	5 years ago
Joshua C. Colp	447f6cc37a	res_pjsip: Fix codec preference defaults. ... When reading in a codec preference configuration option the value would be set on the respective option before applying any default adjustments, resulting in the configuration not being as expected. This was exposed by the REST API push configuration as it used the configuration returned by Asterisk to then do a modification. In the case of codec preferences one of the options had a transcode value of "unspecified" when the defaults should have ensured it would be "allow" instead. This also renames the options in other places that were missed. Change-Id: I4ad42e74fdf181be2e17bc75901c62591d403964	5 years ago
George Joseph	a15e64aaf5	ACN: Configuration renaming for pjsip endpoint ... This change renames the codec preference endpoint options. incoming_offer_codec_prefs becomes codec_prefs_incoming_offer to keep the options together when showing an endpoint. Change-Id: I6202965b4723777f22a83afcbbafcdafb1d11c8d	5 years ago
Ben Ford	5fbed5af24	res_stir_shaken: Add stir_shaken option and general improvements. ... Added a new configuration option for PJSIP endpoints - stir_shaken. If set to yes, then STIR/SHAKEN support will be added to inbound and outbound INVITEs. The default is no. Alembic has been updated to include this option. Previously the dialplan function was not trimming the whitespace from the parameters it recieved. Now it does. Also added a conditional that, when TEST_FRAMEWORK is enabled, the timestamp in the identity header will be overlooked. This is just for testing, since the testsuite will rely on a SIPp scenario with a preset identity header to trigger the MISMATCH result. Change-Id: I43d67f1489b8c1c5729ed3ca8d71e35ddf438df1	5 years ago
George Joseph	2d22e34206	ACN: res_pjsip endpoint options ... This commit adds the endpoint options required to control Advanced Codec Negotiation. incoming_offer_codec_prefs outgoing_offer_codec_prefs incoming_answer_codec_prefs outgoing_answer_codec_prefs The documentation may need tweaking and some additional edits added, especially for the "answer" prefs. That'll be handled when things finalize. This commit is safe to merge as it doens't alter any existing functionality nor does it alter the previous codec negotiation work which may now be obsolete. Change-Id: I920ba925d7dd36430dfd2ebd9d82d23f123d0e11	5 years ago
George Joseph	7ba6d43083	test_res_pjsip_session_caps: Create unit test ... This unit test runs through combinations of... * Local codecs * Remote Codecs * Codec Preference * Incoming/Outgoing A few new APIs were created to make it easier to test the functionality but didn't result in any actual functional change. ASTERISK_28777 Change-Id: Ic8957c43e7ceeab0e9272af60ea53f056164f164	6 years ago
George Joseph	2ee455958e	codec_negotiation: Implement outgoing_call_offer_pref ... Based on this new endpoint setting, a joint list of preferred codecs between those received from the Asterisk core (remote), and those specified in the endpoint's "allow" parameter (local) is created and is used to create the outgoing SDP offer. * Add outgoing_call_offer_pref to pjsip_configuration (endpoint) * Add "call_direction" to res_pjsip_session. * Update pjsip_session_caps.c to make the functions more generic so they could be used for both incoming and outgoing. * Update ast_sip_session_create_outgoing to create the pending_media_state->topology with the results of ast_sip_session_create_joint_call_stream(). * The endpoint "preferred_codec_only" option now automatically sets AST_SIP_CALL_CODEC_PREF_FIRST in incoming_call_offer_pref. * A helper function ast_stream_get_format_count() was added to streams to return the current count of formats. ASTERISK-28777 Change-Id: Id4ec0b4a906c2ae5885bf947f101c59059935437	6 years ago
Kevin Harwell	06dada3f01	codec negotiation: add incoming_call_offer_prefs option ... Add a new option, incoming_call_offer_pref, to res_pjsip endpoints that specifies the preferred order of codecs after receiving an offer. This patch does the following: Adds a new enumeration, ast_sip_call_codec_pref, used by the the new configuration option that's added to the endpoint media structure. Adds a new ast_sip_session_caps structure that's set for each session media object. Creates a new file, res_pjsip_session_caps that "implements" the new structure and option, and is compiled into the res_pjsip_session library. ASTERISK-28756 #close Change-Id: I35e7a2a0c236cfb6bd9cdf89539f57a1ffefc76f	6 years ago
Joshua C. Colp	d6712790cd	pjsip: Update ACLs on named ACL changes. ... This change extends the Sorcery API to allow a wizard to be told to explicitly reload objects or a specific object type even if the wizard believes that nothing has changed. This has been leveraged by res_pjsip and res_pjsip_acl to reload endpoints and PJSIP ACLs when a named ACL changes. ASTERISK-28697 Change-Id: Ib8fee9bd9dd490db635132c479127a4114c1ca0b	6 years ago
Sean Bright	32ce6e9a06	channels: Allow updating variable value ... When modifying an already defined variable in some channel drivers they add a new variable with the same name to the list, but that value is never used, only the first one found. Introduce ast_variable_list_replace() and use it where appropriate. ASTERISK-23756 #close Patches: setvar-multiplie.patch submitted by Michael Goryainov Change-Id: Ie1897a96c82b8945e752733612ee963686f32839	6 years ago
Torrey Searle	4661c08549	chan_pjsip: add a flag to ignore 183 responses if no SDP present ... chan_sip will always ignore 183 responses that do not contain SDP however, chan_pjsip will currently always translate it into a 183 with SDP. This new flag allows chan_pjsip to have the same behavior as chan_sip. ASTERISK-28322 #close Change-Id: If81cfaa17c11b6ac703e3d71696f259d86c6be4a	7 years ago
Kevin Harwell	f668db9ba0	pjsip/config_global: regcontext context not created ... The context specified by 'regcontext' was not being created, so when Asterisk attempted to later dynamically add an extension it would fail. This patch now creates the context if a 'regcontext' is specified. ASTERISK-28238 Change-Id: I0f36cf4ab0a93ff4b1cc5548d617ecfd45e09265	7 years ago
Joshua Colp	50ac85cb40	stasis: Segment channel snapshot to reduce creation cost. ... When a channel snapshot was created it used to be done from scratch, copying all data (many strings). This incurs a cost when doing so. This change segments the channel snapshot into different components which can be reused if unchanged from the previous snapshot creation, reducing the cost. In normal cases this results in some pointers being copied with reference count being bumped, some integers being set, and a string or two copied. The other benefit is that it is now possible to determine if a channel snapshot update is redundant and thus stop it before a message is published to stasis. The specific segments in the channel snapshot were split up based on whether they are changed together, how often they are changed, and their general grouping. In practice only 1 (or 0) of the segments actually get changed in normal operation. Invalidation is done by setting a flag on the channel when the segment source is changed, forcing creation of a new segment when the channel snapshot is created. ASTERISK-28119 Change-Id: I5d7ef3df963a88ac47bc187d73c5225c315f8423	7 years ago
Alexei Gradinari	eee935983b	pjsip: new endpoint's options to control Connected Line updates ... This patch adds new options 'trust_connected_line' and 'send_connected_line' to the endpoint. The option 'trust_connected_line' is to control if connected line updates are accepted from this endpoint. The option 'send_connected_line' is to control if connected line updates can be sent to this endpoint. The default value is 'yes' for both options. Change-Id: I16af967815efd904597ec2f033337e4333d097cd	7 years ago
Alexei Gradinari	aae5bdc22e	res_pjsip: set callerid_tag to empty string ... This patch sets the callerid_tag to empty string by default. If the callerid_tag is set to NULL then the tag does not become part of a connected line update. For example: Alice's tag is "Alice". Bob's tag is empty. Charlie's tag is "Charlie". Alice calls Bob and then does attended transfer to Charlie. When Alice hangs up the CONNECTEDLINE(tag) is "Alice" on the interception routine on the Charlie's channel, but should be empty. Ths patch also fix memory leaks if there are more then one options "callerid", "callerid_tag", "voicemail_extension" and "contact_user" in the pjsip.conf endpoint definition. Change-Id: I86ba455c4677ca8d516d9a04ce7fb4d24dd576e4	7 years ago
Richard Mudgett	d60411a2b4	res_pjsip: Fix mwi_subscribe_replaces_unsolicited type mismatch ... ASTERISK-27988 Change-Id: Iccafdd0552ea8aaed647620fb14499f1bf341843	7 years ago
George Joseph	8f42447c68	res_pjsip: Add 'suppress_q850_reason_headers' option to endpoint ... A new option 'suppress_q850_reason_headers' has been added to the endpoint object. Some devices can't accept multiple Reason headers and get confused when both 'SIP' and 'Q.850' Reason headers are received. This option allows the 'Q.850' Reason header to be suppressed. The default value is 'no'. ASTERISK-27949 Reported-by: Ross Beer Change-Id: I54cf37a827d77de2079256bb3de7e90fa5e1deb1	7 years ago
George Joseph	880fbff6b7	res_pjsip_session: Add ability to accept multiple sdp answers ... pjproject by default currently will follow media forked during an INVITE on outbound calls if the To tag is different on a subsequent response as that on an earlier response. We handle this correctly. There have been reported cases where the To tag is the same but we still need to follow the media. The pjproject patch in this commit adds the capability to sip_inv and also adds the capability to control it at runtime. The original "different tag" behavior was always controllable at runtime but we never did anything with it and left it to default to TRUE. So, along with the pjproject patch, this commit adds options to both the system and endpoint objects to control the two behaviors, and a small logic change to session_inv_on_media_update in res_pjsip_session to control the behavior at the endpoint level. The default behavior for "different tags" remains the same at TRUE and the default for "same tag" is FALSE. Change-Id: I64d071942b79adb2f0a4e13137389b19404fe3d6 ASTERISK-27936 Reported-by: Ross Beer	7 years ago
Joshua Colp	882e79b77e	pjsip: Rewrite OPTIONS support with new eyes. ... The OPTIONS support in PJSIP has organically grown, like many things in Asterisk. It has been tweaked, changed, and adapted based on situations run into. Unfortunately this has taken its toll. Configuration file based objects have poor performance and even dynamic ones aren't that great. This change scraps the existing code and starts fresh with new eyes. It leverages all of the APIs made available such as sorcery observers and serializers to provide a better implementation. 1. The state of contacts, AORs, and endpoints relevant to the qualify process is maintained. This state can be updated by external forces (such as a device registering/unregistering) and also the reload process. This state also includes the association between endpoints and AORs. 2. AORs are scheduled and not contacts. This reduces the amount of work spent juggling scheduled items. 3. Manipulation of which AORs are being qualified and the endpoint states all occur within a serializer to reduce the conflict that can occur with multiple threads attempting to modify things. 4. Operations regarding an AOR use a serializer specific to that AOR. 5. AORs and endpoint state act as state compositors. They take input from lower level objects (contacts feed AORs, AORs feed endpoint state) and determine if a sufficient enough change has occurred to be fed further up the chain. 6. Realtime is supported by using observers to know when a contact has been registered. If state does not exist for the associated AOR then it is retrieved and becomes active as appropriate. The end result of all of this is best shown with a configuration file of 3000 endpoints each with an AOR that has a static contact. In the old code it would take over a minute to load and use all 8 of my cores. This new code takes 2-3 seconds and barely touches the CPU even while dealing with all of the OPTIONS requests. ASTERISK-26806 Change-Id: I6a5ebbfca9001dfe933eaeac4d3babd8d2e6f082	8 years ago
Richard Mudgett	d50d637764	stringfields: Collect extended stringfields into the stringfield section. ... Use of extended stringfields is a temporary mechanism to avoid ABI breakage in released branches without resorting to more inconvienient methods. * Collect existing extended stringfields into the parent stringfield section of the struct. Change-Id: I8d46d037801b4518837c3ea4b6df95ceadc9436b	8 years ago
Sean Bright	65a4084060	res_pjsip: Endpoint destruction does not free DTLS configuration ... ASTERISK-27679 #close Reported by: Mak Dee Change-Id: I89a2783a11be0763bf123d1619ed176b6225cf42	8 years ago
Richard Mudgett	8494e78010	res_pjsip: Split type=identify to IP address and SIP header matching priorities ... The type=identify endpoint identification method can match by IP address and by SIP header. However, the SIP header matching has limited usefulness because you cannot specify the SIP header matching priority relative to the IP address matching. All the matching happens at the same priority and the order of evaluating the identify sections is indeterminate. e.g., If you had two type=identify sections where one matches by IP address for endpoint alice and the other matches by SIP header for endpoint bob then you couldn't predict which endpoint is matched when a request comes in that matches both. * Extract the SIP header matching criteria into its own "header" endpoint identification method so the user can specify the relative priority of the SIP header and the IP address matching criteria in the global endpoint_identifier_order option. The "ip" endpoint identification method now only matches by IP address. ASTERISK-27491 Change-Id: I9df142a575b7e1e3471b7cda5d3ea156cef08095	8 years ago
Richard Mudgett	a7bbb18e5c	res_pjsip.c: Fix ident_to_str() and refactor ident_handler(). ... * Extracted sip_endpoint_identifier_type2str() and sip_endpoint_identifier_str2type() to simplify the calling functions. * Fixed pjsip_configuration.c:ident_to_str() building the endpoint's identify_by value string. Change-Id: Ide876768a8d5d828b12052e2a75008b0563fc509	8 years ago
Corey Farrell	1b80ffa495	Fix Common Typo's. ... Fix instances of: * Retreive * Recieve * other then * different then * Repeated words ("the the", "an an", "and and", etc). * othterwise, teh ASTERISK-24198 #close Change-Id: I3809a9c113b92fd9d0d9f9bac98e9c66dc8b2d31	8 years ago
Sean Bright	dbb376f166	pjsip_configuration: Add correct file header ... Change-Id: I25348c386a222bb704aff07f54375108a6402906	8 years ago
Corey Farrell	53f42cc052	res_pjsip: Fix warning by deferring implicit type cast. ... Mac doesn't like the comparison of -1 to an enum, so store the result of ast_sip_str_to_dtmf to an int so we can check for the negative return value. ast_sip_str_to_dtmf returns an int so this is only delaying the implicit type cast. Change-Id: I0c262c1719ee951aae1f437d733a301cf5f8ad29	8 years ago
Corey Farrell	29205e7adc	res_pjsip: Fix leak on error in ast_sip_auth_vector_init. ... Change-Id: Ib0fc7a18f3135ca8990c3984c9e15f6d26e556e8	8 years ago
Joshua Colp	637b37fb98	Merge "dtls: Add support for ephemeral DTLS certificates."	8 years ago
Sean Bright	04d3785a79	dtls: Add support for ephemeral DTLS certificates. ... This mimics the behavior of Chrome and Firefox and creates an ephemeral X.509 certificate for each DTLS session. Currently, the only supported key type is ECDSA because of its faster generation time, but other key types can be added in the future as necessary. ASTERISK-27395 Change-Id: I5122e5f4b83c6320cc17407a187fcf491daf30b4	8 years ago
Ben Ford	f8e0f9be22	res_pjsip: Add to list of valid characters for from_user. ... Fixes a regression where some characters were unable to be used in the from_user field of an endpoint. Additionally, the backtick was removed from the list of valid characters, since it is not valid, and it was replaced with a single quote, which is a valid character. ASTERISK-27387 Change-Id: Id80c10a644508365c87b3182e99ea49da11b0281	8 years ago
Joshua Colp	9e1fbab382	res_pjsip: Add 'ip' as a valid option to 'identify_by' on endpoint. ... When the identify_by option on an endpoint is set to ip it will only be identified using the res_pjsip_endpoint_identifier_ip module. This ensures that it is not mistakenly matched using the username of the From header. To ensure behavior has not changed the default has been changed to "username,ip" for the identify_by option. ASTERISK-27206 Change-Id: I2170b86a7f7e221b4f00bf14aa1ef1ac5b050bbd	8 years ago
Corey Farrell	a68a91f722	res_pjsip: Fix leak of persistent endpoint references. ... Do not manually call sip_endpoint_apply_handler from load_all_endpoints. This is not necessary and causes memory leaks. Additionally reinitialize persistent->aors when we reuse a persistent object with a new endpoint. ASTERISK-27306 Change-Id: I59bbfc8da8a14d5f4af8c5bb1e71f8592ae823eb	8 years ago
Sean Bright	721947ebae	webrtc: Allow 'webrtc' to be set on endpoints without dtls_ca_file ... If using a legitimate certificate from a trusted certificate authority, you don't need to provide CA file. Change-Id: I8623973b4209b44889243716d7880274caed8a6d	8 years ago
George Joseph	446d48fd49	res_pjsip: Add handling for incoming unsolicited MWI NOTIFY ... A new endpoint parameter "incoming_mwi_mailbox" allows Asterisk to receive unsolicited MWI NOTIFY requests and make them available to other modules via the stasis message bus. res_pjsip_pubsub has a new handler "pubsub_on_rx_mwi_notify_request" that parses a simple-message-summary body and, if endpoint->incoming_mwi_account is set, calls ast_publish_mwi_state with the voice-message counts from the message. Change-Id: I08bae3d16e77af48fcccc2c936acce8fc0ef0f3c	8 years ago
Richard Mudgett	82f4ade959	res_pjsip: Remove ephemeral registered contacts on transport shutdown. ... The fix for the issue is broken up into three parts. This is part two which handles the server side of REGISTER requests when rewrite_contact is enabled. Any registered reliable transport contact becomes invalid when the transport connection becomes disconnected. * Monitor the rewrite_contact's reliable transport REGISTER contact for shutdown. If it is shutdown then the contact must be removed because it is no longer valid. Otherwise, when the client attempts to re-REGISTER it may be blocked because the invalid contact is there. Also if we try to send a call to the endpoint using the invalid contact then the endpoint is not likely to see the request. The endpoint either won't be listening on that port for new connections or a NAT/firewall will block it. * Prune any rewrite_contact's registered reliable transport contacts on boot. The reliable transport no longer exists so the contact is invalid. * Websockets always rewrite the REGISTER contact address and the transport needs to be monitored for shutdown. * Made the websocket transport set a unique name since that is what we use as the ao2 container key. Otherwise, we would not know which transport we find when one of them shuts down. The names are also used for PJPROJECT debug logging. * Made the websocket transport post the PJSIP_TP_STATE_CONNECTED state event. Now the global keep_alive_interval option, initially idle shutdown timer, and the server REGISTER contact monitor can work on wetsocket transports. * Made the websocket transport set the PJSIP_TP_DIR_INCOMING direction. Now initially idle websockets will automatically shutdown. ASTERISK-27147 Change-Id: I397a5e7d18476830f7ffe1726adf9ee6c15964f4	8 years ago
Kevin Harwell	521b6fed12	alembic/res_pjsip: Add "webrtc" configuration option ... When the "webrtc" option was added in res_pjsip it was not added to the alembic scripts. This patch adds the option for alembic. Also, changed the sorcery configuration type to an OPT_YESNO_T value instead of an OPT_BOOL_T so if this field is ever written to a database it will write out the correct value. ASTERISK-27119 #close Change-Id: I3e199f060aea25e193c439fc5cf96be4d3ed1c7b	8 years ago
Torrey Searle	65c560894d	chan_pjsip: add a new function PJSIP_DTMF_MODE ... This function is a replica of SIPDtmfMode, allowing the DTMF mode of a PJSIP call to be modified on a per-call basis ASTERISK-27085 #close Change-Id: I20eef5da3e5d1d3e58b304416bc79683f87e7612	8 years ago
Kevin Harwell	7da6ddda30	res_pjsip: Add "webrtc" configuration option ... This patch creates a new configuration option called "webrtc". When enabled it defaults and enables the following options that are needed in order for webrtc to work in Asterisk: rtcp-mux, use_avpf, ice_support, and use_received_transport=enabled media_encryption=dtls dtls_verify=fingerprint dtls_setup=actpass When "webrtc" is enabled, this patch also parses the "msid" media level attribute from an SDP. It will also appropriately add it onto the outgoing session when applicable. Lastly, when "webrtc" is enabled h264 RTCP FIR feedback frames are now sent. ASTERISK-27119 #close Change-Id: I5ec02e07c5d5b9ad86a34fdf31bf2f9da9aac6fd	8 years ago
Jenkins2	0f45c979a3	Merge "res_rtp_asterisk / res_pjsip: Add support for BUNDLE."	8 years ago