mirror of https://github.com/asterisk/asterisk
master
20
22
23
releases/certified-20.7
certified/20.7
revert-1530-endpoints-remove-subscription-and-router
revert-1412-master-feature-extended-hangupcause
releases/22
releases/21
releases/23
releases/20
master-issue-1604
21
certified/18.9
18
revert-1477-taskpool-pjsip
releases/21-pre-reorder
releases/20-pre-reorder
releases/22.5
releases/20.15
releases/21.10
releases/18
releases/certified-18.9
releases/22.4
releases/21.9
releases/20.14
revert-549-master-issue-548
16
19
releases/19
releases/16
20.2
18.17
20.1
19.8
18.16
16.30
20.0
19.7
18.15
16.29
16.19
19.6
18.14
16.28
development/16/python3
development/16/geolocation
19.5
18.13
16.27
19.4
18.12
16.26
19.3
18.11
16.25
certified/16.8
19.2
18.10
16.24
certified/16.3
19.1
18.9
16.23
19.0
18.8
16.22
16.21
18.7
18.6
16.20
18.5
17.9
13.38
17
13
18.4
16.18
18.3
16.17
18.2
16.16
18.1
16.15
jenkinstest-16
18.0
17.8
16.14
13.37
17.7
16.13
13.36
certified/13.21
17.6
16.12
13.35
17.5
16.11
13.34
17.4
16.10
13.33
17.3
16.9
13.32
17.2
16.8
13.31
17.1
16.7
13.30
17.0
16.6
13.29
16.5
15.7
13.28
15
16.4
13.27
16.3
13.26
16.2
13.25
16.1
13.24
16.0
15.6
13.23
14.7
14
certified/13.18
certified/13.13
certified/11.6
11
certified/13.8
certified/13.1
1.8
certified/1.8.28
12
certified/1.8.15
certified/11.2
10-digiumphones
10
certified/1.8.11
certified/1.8.6
1.6.2
1.4
1.6.1
1.6.0
1.2
1.2-netsec
1.0
certified-20.7-cert8
22.7.0
21.12.0
23.1.0
20.17.0
23.1.0-rc2
22.7.0-rc2
21.12.0-rc2
20.17.0-rc2
22.7.0-rc1
23.1.0-rc1
21.12.0-rc1
20.17.0-rc1
23.0.0
22.6.0
21.11.0
20.16.0
21.11.0-rc2
23.0.0-rc2
22.6.0-rc2
20.16.0-rc2
20.15.0
20.15.0-rc1
20.15.0-rc2
20.15.0-rc3
20.15.1
20.15.2
20.16.0-rc1
21.10.0
21.10.0-rc1
21.10.0-rc2
21.10.0-rc3
21.10.1
21.10.2
21.11.0-rc1
22.5.0-rc1
22.5.0-rc2
22.5.0-rc3
22.5.0
22.5.1
22.5.2
22.6.0-rc1
23.0.0-rc1
18.26.4
certified-18.9-cert17
23.0.0-pre1
certified-20.7-cert7
certified-18.9-cert16
18.26.3
certified-20.7-cert6
certified-18.9-cert15
22.4.1
21.9.1
20.14.1
18.26.2
certified-20.7-cert5
certified-18.9-cert14
22.4.0
21.9.0
20.14.0
22.4.0-rc1
21.9.0-rc1
20.14.0-rc1
22.3.0
21.8.0
20.13.0
22.3.0-rc1
21.8.0-rc1
20.13.0-rc1
22.2.0
21.7.0
20.12.0
22.2.0-rc2
21.7.0-rc2
20.12.0-rc2
22.2.0-rc1
21.7.0-rc1
20.12.0-rc1
certified-20.7-cert4
certified-18.9-cert13
22.1.1
21.6.1
20.11.1
18.26.1
22.1.0
21.6.0
20.11.0
18.26.0
22.1.0-rc1
21.6.0-rc1
20.11.0-rc1
18.26.0-rc1
18.25.0
20.10.0
21.5.0
22.0.0
22.0.0-rc2
21.5.0-rc2
20.10.0-rc2
18.25.0-rc2
22.0.0-rc1
21.5.0-rc1
20.10.0-rc1
18.25.0-rc1
certified-20.7-cert3
certified-18.9-cert12
21.4.3
20.9.3
18.24.3
22.0.0-pre1
21.4.2
20.9.2
18.24.2
certified-20.7-cert2
certified-18.9-cert11
21.4.1
20.9.1
18.24.1
21.4.0
20.9.0
18.24.0
certified-20.7-cert1
certified-18.9-cert10
21.4.0-rc1
20.9.0-rc1
18.24.0-rc1
21.3.1
20.8.1
18.23.1
21.3.0
20.8.0
18.23.0
certified-20.7-cert1-rc2
certified-18.9-cert9
20.8.0-rc1
21.3.0-rc1
18.23.0-rc1
certified-20.7-cert1-rc1
certified-20.7-cert1-pre1
21.2.0
20.7.0
18.22.0
certified-18.9-cert8
21.2.0-rc2
20.7.0-rc2
18.22.0-rc2
21.2.0-rc1
20.7.0-rc1
18.22.0-rc1
certified-18.9-cert8-rc2
certified-18.9-cert8-rc1
21.1.0
20.6.0
18.21.0
21.1.0-rc2
20.6.0-rc2
18.21.0-rc2
21.1.0-rc1
20.6.0-rc1
18.21.0-rc1
21.0.2
20.5.2
18.20.2
certified-18.9-cert7
certified-18.9-cert6
21.0.1
20.5.1
18.20.1
21.0.0
20.5.0
18.20.0
21.0.0-rc1
20.5.0-rc1
18.20.0-rc1
21.0.0-pre1
18.19.0
20.4.0
20.4.0-rc2
18.19.0-rc2
20.4.0-rc1
18.19.0-rc1
20.3.1
certified-18.9-cert5
19.8.1
18.18.1
16.30.1
certified-18.9-cert4
20.3.0
18.18.0
20.3.0-rc1
18.18.0-rc1
20.2.1
18.17.1
20.2.0
18.17.0
20.2.0-rc1
18.17.0-rc1
certified/18.9-cert4
20.1.0
19.8.0
18.16.0
16.30.0
20.1.0-rc2
19.8.0-rc2
18.16.0-rc2
16.30.0-rc2
20.1.0-rc1
18.16.0-rc1
19.8.0-rc1
16.30.0-rc1
certified/18.9-cert3
20.0.1
19.7.1
18.15.1
16.29.1
19.7.0
20.0.0
18.15.0
16.29.0
certified/18.9-cert2
20.0.0-rc2
19.7.0-rc2
18.15.0-rc2
16.29.0-rc2
20.0.0-rc1
19.7.0-rc1
18.15.0-rc1
16.29.0-rc1
19.6.0
18.14.0
16.28.0
19.6.0-rc2
18.14.0-rc2
16.28.0-rc2
19.6.0-rc1
18.14.0-rc1
16.28.0-rc1
19.5.0
18.13.0
16.27.0
19.5.0-rc1
18.13.0-rc1
16.27.0-rc1
19.4.1
18.12.1
16.26.1
19.4.0
18.12.0
16.26.0
19.4.0-rc1
18.12.0-rc1
16.26.0-rc1
certified/18.9-cert1
19.3.3
18.11.3
16.25.3
certified/16.8-cert14
19.3.2
18.11.2
16.25.2
19.3.1
18.11.1
16.25.1
19.3.0
18.11.0
16.25.0
19.3.0-rc1
18.11.0-rc1
16.25.0-rc1
certified/16.8-cert13
19.2.1
18.10.1
16.24.1
19.2.0
18.10.0
16.24.0
19.2.0-rc1
18.10.0-rc1
16.24.0-rc1
certified/18.9-cert1-rc1
19.1.0
18.9.0
16.23.0
19.1.0-rc1
18.9.0-rc1
16.23.0-rc1
19.0.0
18.8.0
16.22.0
certified/16.8-cert12
19.0.0-rc1
18.8.0-rc1
16.22.0-rc1
16.21.1
18.7.1
18.7.0
16.21.0
18.7.0-rc3
16.21.0-rc3
18.7.0-rc2
16.21.0-rc2
18.7.0-rc1
16.21.0-rc1
certified/16.8-cert11
18.6.0
16.20.0
18.6.0-rc1
16.20.0-rc1
certified/16.8-cert10
18.5.1
17.9.4
16.19.1
13.38.3
18.5.0
16.19.0
certified/16.8-cert9
18.5.0-rc1
16.19.0-rc1
18.4.0
16.18.0
18.4.0-rc1
16.18.0-rc1
certified/16.8-cert8
18.3.0
16.17.0
18.3.0-rc2
16.17.0-rc2
18.3.0-rc1
16.17.0-rc1
certified/16.8-cert7
18.2.2
17.9.3
16.16.2
certified/16.8-cert6
18.2.1
17.9.2
16.16.1
13.38.2
18.2.0
16.16.0
18.2.0-rc1
16.16.0-rc1
18.1.1
17.9.1
16.15.1
13.38.1
18.1.0
17.9.0
16.15.0
13.38.0
18.1.0-rc1
17.9.0-rc1
16.15.0-rc1
13.38.0-rc1
18.0.1
17.8.1
16.14.1
certified/16.8-cert5
13.37.1
certified/16.8-cert4
certified/16.8-cert4-rc4
18.0.0
17.8.0
16.14.0
13.37.0
18.0.0-rc2
certified/16.8-cert4-rc3
18.0.0-rc1
17.8.0-rc1
16.14.0-rc1
13.37.0-rc1
17.7.0
16.13.0
13.36.0
17.7.0-rc2
16.13.0-rc2
13.36.0-rc2
17.7.0-rc1
16.13.0-rc1
13.36.0-rc1
certified/16.8-cert4-rc2
17.6.0
16.12.0
13.35.0
17.6.0-rc1
16.12.0-rc1
13.35.0-rc1
certified/16.8-cert4-rc1
certified/16.8-cert3
17.5.1
16.11.1
17.5.0
16.11.0
13.34.0
17.5.0-rc3
16.11.0-rc3
13.34.0-rc3
17.5.0-rc2
16.11.0-rc2
13.34.0-rc2
17.5.0-rc1
16.11.0-rc1
13.34.0-rc1
certified/16.8-cert2
17.4.0
16.10.0
13.33.0
certified/16.8-cert1
17.4.0-rc2
16.10.0-rc2
13.33.0-rc2
17.4.0-rc1
16.10.0-rc1
13.33.0-rc1
certified/16.8-cert1-rc5
certified/16.8-cert1-rc4
17.3.0
16.9.0
13.32.0
17.3.0-rc1
16.9.0-rc1
13.32.0-rc1
certified/16.8-cert1-rc3
certified/16.8-cert1-rc2
certified/16.8-cert1-rc1
17.2.0
16.8.0
13.31.0
17.2.0-rc2
16.8.0-rc2
13.31.0-rc2
17.2.0-rc1
16.8.0-rc1
13.31.0-rc1
certified/16.3-cert1
certified/13.21-cert6
17.1.0
16.7.0
13.30.0
17.1.0-rc2
16.7.0-rc2
13.30.0-rc2
17.1.0-rc1
16.7.0-rc1
13.30.0-rc1
certified/13.21-cert5
17.0.1
16.6.2
13.29.2
17.0.0
17.0.0-rc3
16.6.1
13.29.1
16.6.0
13.29.0
16.6.0-rc2
13.29.0-rc2
17.0.0-rc2
16.6.0-rc1
13.29.0-rc1
16.5.1
15.7.4
13.28.1
17.0.0-rc1
16.5.0
13.28.0
16.5.0-rc1
13.28.0-rc1
certified/13.21-cert4
16.4.1
15.7.3
13.27.1
16.4.0
13.27.0
16.4.0-rc1
13.27.0-rc1
16.3.0
13.26.0
16.3.0-rc1
13.26.0-rc1
16.2.1
15.7.2
16.2.0
13.25.0
13.25.0-rc3
16.2.0-rc2
13.25.0-rc2
16.2.0-rc1
13.25.0-rc1
16.1.1
15.7.1
13.24.1
16.1.0
13.24.0
15.7.0
16.1.0-rc1
15.7.0-rc1
13.24.0-rc1
16.0.1
15.6.2
16.0.0
16.0.0-rc3
certified/13.21-cert3
15.6.1
14.7.8
13.23.1
16.0.0-rc2
15.6.0
13.23.0
15.6.0-rc1
13.23.0-rc1
16.0.0-rc1
15.5.0
13.22.0
15.5.0-rc1
13.22.0-rc1
15.4.1
14.7.7
certified/13.21-cert2
certified/13.18-cert4
13.21.1
certified/13.21-cert1
certified/13.21-cert1-rc2
certified/13.21-cert1-rc1
15.4.0
13.21.0
15.4.0-rc2
15.4.0-rc1
13.21.0-rc1
15.3.0
13.20.0
15.3.0-rc2
13.20.0-rc2
15.3.0-rc1
13.20.0-rc1
15.2.2
certified/13.18-cert3
14.7.6
13.19.2
13.19.1
15.2.1
15.2.0
13.19.0
15.2.0-rc2
13.19.0-rc2
certified/13.18-cert2
15.1.5
14.7.5
13.18.5
certified/13.18-cert1
15.2.0-rc1
13.19.0-rc1
certified/13.18-cert1-rc3
certified/13.13-cert9
15.1.4
14.7.4
13.18.4
15.1.3
certified/13.13-cert8
14.7.3
13.18.3
certified/13.18-cert1-rc2
15.1.2
14.7.2
13.18.2
certified/13.18-cert1-rc1
certified/13.13-cert7
15.1.1
14.7.1
13.18.1
15.1.0
14.7.0
13.18.0
15.1.0-rc2
14.7.0-rc2
13.18.0-rc2
15.1.0-rc1
14.7.0-rc1
13.18.0-rc1
15.0.0
certified/13.13-cert6
certified/11.6-cert18
14.6.2
13.17.2
11.25.3
15.0.0-rc1
14.6.1
certified/13.13-cert5
13.17.1
certified/11.6-cert17
11.25.2
15.0.0-beta1
14.6.0
13.17.0
14.6.0-rc1
13.17.0-rc1
14.5.0
13.16.0
14.5.0-rc2
13.16.0-rc2
14.5.0-rc1
13.16.0-rc1
certified/13.13-cert4
14.4.1
13.15.1
14.4.0
13.15.0
14.4.0-rc3
13.15.0-rc3
14.3.1
13.14.1
certified/13.13-cert3
13.15.0-rc2
14.4.0-rc2
14.4.0-rc1
13.15.0-rc1
certified/13.13-cert2
14.3.0
13.14.0
certified/13.13-cert1
14.3.0-rc2
13.14.0-rc2
certified/13.13-cert1-rc4
14.3.0-rc1
13.14.0-rc1
certified/13.13-cert1-rc3
certified/13.13-cert1-rc2
certified/11.6-cert16
certified/13.8-cert4
14.2.1
13.13.1
11.25.1
certified/13.13-cert1-rc1
14.2.0
13.13.0
14.2.0-rc2
13.13.0-rc2
11.25.0
14.2.0-rc1
13.13.0-rc1
11.25.0-rc1
14.1.2
13.12.2
14.1.1
13.12.1
11.24.1
14.1.0
13.12.0
11.24.0
14.1.0-rc1
13.12.0-rc1
11.24.0-rc1
14.0.2
14.0.1
14.0.0
14.0.0-rc2
14.0.0-rc1
13.11.2
certified/11.6-cert15
certified/13.8-cert3
11.23.1
13.11.1
13.11.0
13.11.0-rc2
14.0.0-beta2
certified/11.6-cert14
certified/11.6-cert14-rc2
certified/13.8-cert2
certified/13.8-cert2-rc1
certified/11.6-cert14-rc1
13.11.0-rc1
14.0.0-beta1
11.23.0
13.10.0
certified/13.1-cert8
13.10.0-rc3
certified/13.8-cert1
13.10.0-rc2
11.23.0-rc1
13.10.0-rc1
certified/13.8-cert1-rc3
13.9.1
13.9.0
certified/13.8-cert1-rc2
13.9.0-rc2
certified/13.1-cert7
13.9.0-rc1
certified/13.1-cert6
13.8.2
13.8.1
certified/13.1-cert5
certified/13.8-cert1-rc1
13.8.0
11.22.0
certified/13.1-cert4
certified/11.6-cert13
11.21.2
13.7.2
11.20.0
13.6.0
13.5.0
11.19.0
certified/13.1-cert3-rc1
13.4.0
11.18.0
0.1.0
0.1.1
0.1.10
0.1.11
0.1.12
0.1.2
0.1.3
0.1.4
0.1.5
0.1.6
0.1.7
0.1.8
0.1.9
0.2.0
0.3.0
0.4.0
0.5.0
0.7.0
0.7.1
0.7.2
0.9.0
1.0.0
1.0.0-rc1
1.0.0-rc2
1.0.1
1.0.10
1.0.11
1.0.11.1
1.0.12
1.0.2
1.0.4
1.0.5
1.0.6
1.0.7
1.0.8
1.0.9
1.2.0
1.2.0-beta1
1.2.0-beta2
1.2.0-rc1
1.2.0-rc2
1.2.1
1.2.10
1.2.10-netsec
1.2.11
1.2.11-netsec
1.2.12
1.2.12-netsec
1.2.12.1
1.2.12.1-netsec
1.2.13
1.2.13-netsec
1.2.14
1.2.14-netsec
1.2.15
1.2.15-netsec
1.2.16
1.2.16-netsec
1.2.17
1.2.17-netsec
1.2.18
1.2.18-netsec
1.2.19
1.2.19-netsec
1.2.2
1.2.2-netsec
1.2.20
1.2.20-netsec
1.2.21
1.2.21-netsec
1.2.21.1
1.2.21.1-netsec
1.2.22
1.2.22-netsec
1.2.23
1.2.23-netsec
1.2.24
1.2.24-netsec
1.2.25
1.2.25-netsec
1.2.26
1.2.26-netsec
1.2.26.1
1.2.26.1-netsec
1.2.26.2
1.2.26.2-netsec
1.2.27
1.2.28
1.2.28.1
1.2.29
1.2.3
1.2.3-netsec
1.2.30
1.2.30.1
1.2.30.2
1.2.30.3
1.2.30.4
1.2.31
1.2.31.1
1.2.31.2
1.2.32
1.2.33
1.2.34
1.2.35
1.2.36
1.2.37
1.2.38
1.2.39
1.2.4
1.2.4-netsec
1.2.40
1.2.5
1.2.5-netsec
1.2.6
1.2.6-netsec
1.2.7
1.2.7-netsec
1.2.7.1
1.2.7.1-netsec
1.2.8
1.2.8-netsec
1.2.9
1.2.9-netsec
1.2.9.1
1.2.9.1-netsec
1.4.0
1.4.0-beta1
1.4.0-beta2
1.4.0-beta3
1.4.0-beta4
1.4.1
1.4.10
1.4.10.1
1.4.11
1.4.12
1.4.12.1
1.4.13
1.4.14
1.4.15
1.4.16
1.4.16.1
1.4.16.2
1.4.17
1.4.18
1.4.18.1
1.4.19
1.4.19-rc1
1.4.19-rc2
1.4.19-rc3
1.4.19-rc4
1.4.19.1
1.4.19.2
1.4.2
1.4.20
1.4.20-rc1
1.4.20-rc2
1.4.20-rc3
1.4.20.1
1.4.21
1.4.21-rc1
1.4.21-rc2
1.4.21.1
1.4.21.2
1.4.22
1.4.22-rc1
1.4.22-rc2
1.4.22-rc3
1.4.22-rc4
1.4.22-rc5
1.4.22.1
1.4.22.2
1.4.23
1.4.23-rc1
1.4.23-rc2
1.4.23-rc3
1.4.23-rc4
1.4.23-testing
1.4.23.1
1.4.23.2
1.4.24
1.4.24-rc1
1.4.24.1
1.4.25
1.4.25-rc1
1.4.25.1
1.4.26
1.4.26-rc1
1.4.26-rc2
1.4.26-rc3
1.4.26-rc4
1.4.26-rc5
1.4.26-rc6
1.4.26.1
1.4.26.2
1.4.26.3
1.4.27
1.4.27-rc1
1.4.27-rc2
1.4.27-rc3
1.4.27-rc4
1.4.27-rc5
1.4.27.1
1.4.28
1.4.28-rc1
1.4.29
1.4.29-rc1
1.4.29.1
1.4.3
1.4.30
1.4.30-rc1
1.4.30-rc2
1.4.30-rc3
1.4.31
1.4.31-rc1
1.4.31-rc2
1.4.32
1.4.32-rc1
1.4.32-rc2
1.4.33
1.4.33-rc1
1.4.33-rc2
1.4.33.1
1.4.34
1.4.34-rc1
1.4.34-rc2
1.4.35
1.4.35-rc1
1.4.36
1.4.36-rc1
1.4.37
1.4.37-rc1
1.4.37.1
1.4.38
1.4.38-rc1
1.4.38.1
1.4.39
1.4.39-rc1
1.4.39.1
1.4.39.2
1.4.4
1.4.40
1.4.40-rc1
1.4.40-rc2
1.4.40-rc3
1.4.40.1
1.4.40.2
1.4.41
1.4.41-rc1
1.4.41.1
1.4.41.2
1.4.42
1.4.42-rc1
1.4.42-rc2
1.4.43
1.4.44
1.4.5
1.4.6
1.4.7
1.4.7.1
1.4.8
1.4.9
1.6.0
1.6.0-beta1
1.6.0-beta2
1.6.0-beta3
1.6.0-beta4
1.6.0-beta5
1.6.0-beta6
1.6.0-beta7
1.6.0-beta7.1
1.6.0-beta8
1.6.0-beta9
1.6.0-rc1
1.6.0-rc2
1.6.0-rc3
1.6.0-rc4
1.6.0-rc5
1.6.0-rc6
1.6.0.1
1.6.0.10
1.6.0.11-rc1
1.6.0.11-rc2
1.6.0.12
1.6.0.13
1.6.0.13-rc1
1.6.0.14
1.6.0.14-rc1
1.6.0.15
1.6.0.16
1.6.0.16-rc1
1.6.0.16-rc2
1.6.0.17
1.6.0.18
1.6.0.18-rc1
1.6.0.18-rc2
1.6.0.18-rc3
1.6.0.19
1.6.0.2
1.6.0.20
1.6.0.20-rc1
1.6.0.21
1.6.0.21-rc1
1.6.0.22
1.6.0.23
1.6.0.23-rc1
1.6.0.23-rc2
1.6.0.24
1.6.0.25
1.6.0.26
1.6.0.26-rc1
1.6.0.27
1.6.0.27-rc1
1.6.0.27-rc2
1.6.0.27-rc3
1.6.0.28
1.6.0.28-rc1
1.6.0.28-rc2
1.6.0.3
1.6.0.3-rc1
1.6.0.3.1
1.6.0.4-rc1
1.6.0.4-testing
1.6.0.5
1.6.0.6
1.6.0.6-rc1
1.6.0.7
1.6.0.7-rc1
1.6.0.7-rc2
1.6.0.8
1.6.0.9
1.6.1-beta1
1.6.1-beta2
1.6.1-beta3
1.6.1-beta4
1.6.1-rc1
1.6.1.0
1.6.1.0-rc2
1.6.1.0-rc3
1.6.1.0-rc4
1.6.1.0-rc5
1.6.1.1
1.6.1.10
1.6.1.10-rc1
1.6.1.10-rc2
1.6.1.10-rc3
1.6.1.11
1.6.1.12
1.6.1.12-rc1
1.6.1.13
1.6.1.13-rc1
1.6.1.14
1.6.1.15-rc1
1.6.1.15-rc2
1.6.1.16
1.6.1.17
1.6.1.18
1.6.1.18-rc1
1.6.1.18-rc2
1.6.1.19
1.6.1.19-rc1
1.6.1.19-rc2
1.6.1.19-rc3
1.6.1.2
1.6.1.20
1.6.1.20-rc1
1.6.1.20-rc2
1.6.1.21
1.6.1.22
1.6.1.23
1.6.1.24
1.6.1.25
1.6.1.3-rc1
1.6.1.4
1.6.1.5
1.6.1.5-rc1
1.6.1.6
1.6.1.7-rc1
1.6.1.7-rc2
1.6.1.8
1.6.1.9
1.6.2.0
1.6.2.0-beta1
1.6.2.0-beta2
1.6.2.0-beta3
1.6.2.0-beta4
1.6.2.0-rc1
1.6.2.0-rc2
1.6.2.0-rc3
1.6.2.0-rc4
1.6.2.0-rc5
1.6.2.0-rc6
1.6.2.0-rc7
1.6.2.0-rc8
1.6.2.1
1.6.2.1-rc1
1.6.2.10
1.6.2.10-rc1
1.6.2.10-rc2
1.6.2.11
1.6.2.11-rc1
1.6.2.11-rc2
1.6.2.12
1.6.2.12-rc1
1.6.2.13
1.6.2.14
1.6.2.14-rc1
1.6.2.15
1.6.2.15-rc1
1.6.2.15.1
1.6.2.16
1.6.2.16-rc1
1.6.2.16.1
1.6.2.16.2
1.6.2.17
1.6.2.17-rc1
1.6.2.17-rc2
1.6.2.17-rc3
1.6.2.17.1
1.6.2.17.2
1.6.2.17.3
1.6.2.18
1.6.2.18-rc1
1.6.2.18.1
1.6.2.18.2
1.6.2.19
1.6.2.19-rc1
1.6.2.2
1.6.2.20
1.6.2.21
1.6.2.22
1.6.2.23
1.6.2.24
1.6.2.3-rc1
1.6.2.3-rc2
1.6.2.4
1.6.2.5
1.6.2.6
1.6.2.6-rc1
1.6.2.6-rc2
1.6.2.7
1.6.2.7-rc1
1.6.2.7-rc2
1.6.2.7-rc3
1.6.2.8
1.6.2.8-rc1
1.6.2.8-rc2
1.6.2.9
1.6.2.9-rc1
1.6.2.9-rc2
1.6.2.9-rc3
1.8.0
1.8.0-beta1
1.8.0-beta2
1.8.0-beta3
1.8.0-beta4
1.8.0-beta5
1.8.0-rc1
1.8.0-rc2
1.8.0-rc3
1.8.0-rc4
1.8.0-rc5
1.8.1
1.8.1-rc1
1.8.1.1
1.8.1.2
1.8.10.0
1.8.10.0-rc1
1.8.10.0-rc2
1.8.10.0-rc3
1.8.10.0-rc4
1.8.10.1
1.8.11.0
1.8.11.0-rc1
1.8.11.0-rc2
1.8.11.0-rc3
1.8.11.1
1.8.12.0
1.8.12.0-rc1
1.8.12.0-rc2
1.8.12.0-rc3
1.8.12.1
1.8.12.2
1.8.13.0
1.8.13.0-rc1
1.8.13.0-rc2
1.8.13.1
1.8.14.0
1.8.14.0-rc1
1.8.14.0-rc2
1.8.14.1
1.8.15-cert4
1.8.15.0
1.8.15.0-rc1
1.8.15.1
1.8.16.0
1.8.16.0-rc1
1.8.16.0-rc2
1.8.17.0
1.8.17.0-rc1
1.8.17.0-rc2
1.8.17.0-rc3
1.8.18.0
1.8.18.0-rc1
1.8.18.1
1.8.19.0
1.8.19.0-rc1
1.8.19.0-rc2
1.8.19.0-rc3
1.8.19.0-tc1
1.8.19.1
1.8.2
1.8.2-rc1
1.8.2.1
1.8.2.2
1.8.2.3
1.8.2.4
1.8.20.0
1.8.20.0-rc1
1.8.20.0-rc2
1.8.20.1
1.8.20.2
1.8.21.0
1.8.21.0-rc1
1.8.21.0-rc2
1.8.22.0
1.8.22.0-rc1
1.8.22.0-rc2
1.8.23.0
1.8.23.0-rc1
1.8.23.0-rc2
1.8.23.1
1.8.24.0
1.8.24.0-rc1
1.8.24.0-rc2
1.8.24.1
1.8.25.0
1.8.25.0-rc1
1.8.25.0-rc2
1.8.26.0
1.8.26.0-rc1
1.8.26.0-rc2
1.8.26.1
1.8.27.0
1.8.27.0-rc1
1.8.27.0-rc2
1.8.28-cert5
1.8.28.0
1.8.28.0-rc1
1.8.28.1
1.8.28.2
1.8.29.0
1.8.29.0-rc1
1.8.3
1.8.3-rc1
1.8.3-rc2
1.8.3-rc3
1.8.3.1
1.8.3.2
1.8.3.3
1.8.30.0
1.8.30.0-rc1
1.8.31.0
1.8.31.0-rc1
1.8.31.1
1.8.32.0
1.8.32.0-rc1
1.8.32.0-rc2
1.8.32.1
1.8.32.2
1.8.32.3
1.8.4
1.8.4-rc1
1.8.4-rc2
1.8.4-rc3
1.8.4.1
1.8.4.2
1.8.4.3
1.8.4.4
1.8.5-rc1
1.8.5.0
1.8.5.1
1.8.6.0
1.8.6.0-rc1
1.8.6.0-rc2
1.8.6.0-rc3
1.8.7.0
1.8.7.0-rc1
1.8.7.0-rc2
1.8.7.1
1.8.7.2
1.8.8.0
1.8.8.0-rc1
1.8.8.0-rc2
1.8.8.0-rc3
1.8.8.0-rc4
1.8.8.0-rc5
1.8.8.1
1.8.8.2
1.8.9.0
1.8.9.0-rc1
1.8.9.0-rc2
1.8.9.0-rc3
1.8.9.1
1.8.9.2
1.8.9.3
10.0.0
10.0.0-beta1
10.0.0-beta2
10.0.0-rc1
10.0.0-rc2
10.0.0-rc3
10.0.0-rc4
10.0.1
10.1.0
10.1.0-rc1
10.1.0-rc2
10.1.1
10.1.2
10.1.3
10.10.0
10.10.0-digiumphones
10.10.0-digiumphones-rc1
10.10.0-digiumphones-rc2
10.10.0-rc1
10.10.0-rc2
10.10.1
10.10.1-digiumphones
10.11.0
10.11.0-digiumphones
10.11.0-digiumphones-rc1
10.11.0-digiumphones-rc2
10.11.0-digiumphones-rc3
10.11.0-rc1
10.11.0-rc2
10.11.0-rc3
10.11.1
10.11.1-digiumphones
10.12.0
10.12.0-digiumphones
10.12.0-digiumphones-rc1
10.12.0-digiumphones-rc2
10.12.0-rc1
10.12.0-rc2
10.12.1
10.12.1-digiumphones
10.12.2
10.12.2-digiumphones
10.12.3
10.12.3-digiumphones
10.12.4
10.12.4-digiumphones
10.2.0
10.2.0-rc1
10.2.0-rc2
10.2.0-rc3
10.2.0-rc4
10.2.1
10.3.0
10.3.0-rc1
10.3.0-rc2
10.3.0-rc3
10.3.1
10.4.0
10.4.0-digiumphones-rc1
10.4.0-digiumphones-rc2
10.4.0-rc1
10.4.0-rc2
10.4.0-rc3
10.4.1
10.4.2
10.5.0
10.5.0-digiumphones
10.5.0-digiumphones-rc1
10.5.0-digiumphones-rc2
10.5.0-rc1
10.5.0-rc2
10.5.1
10.5.1-digiumphones
10.5.2
10.5.2-digiumphones
10.6.0
10.6.0-digiumphones
10.6.0-digiumphones-rc1
10.6.0-digiumphones-rc2
10.6.0-rc1
10.6.0-rc2
10.6.1
10.6.1-digiumphones
10.7.0
10.7.0-digiumphones
10.7.0-digiumphones-rc1
10.7.0-rc1
10.7.1
10.7.1-digiumphones
10.8.0
10.8.0-digiumphones
10.8.0-digiumphones-rc1
10.8.0-digiumphones-rc2
10.8.0-rc1
10.8.0-rc2
10.9.0
10.9.0-digiumphones
10.9.0-digiumphones-rc1
10.9.0-digiumphones-rc2
10.9.0-digiumphones-rc3
10.9.0-rc1
10.9.0-rc2
10.9.0-rc3
11.0.0
11.0.0-beta1
11.0.0-beta2
11.0.0-rc1
11.0.0-rc2
11.0.1
11.0.2
11.1.0
11.1.0-rc1
11.1.0-rc2
11.1.0-rc3
11.1.1
11.1.2
11.10.0
11.10.0-rc1
11.10.1
11.10.2
11.11.0
11.11.0-rc1
11.12.0
11.12.0-rc1
11.12.1
11.13.0
11.13.0-rc1
11.13.1
11.14.0
11.14.0-rc1
11.14.0-rc2
11.14.1
11.14.2
11.15.0
11.15.0-rc1
11.15.0-rc2
11.15.1
11.16.0
11.16.0-rc1
11.17.0
11.17.0-rc1
11.17.1
11.18.0-rc1
11.19.0-rc1
11.2.0
11.2.0-rc1
11.2.0-rc2
11.2.1
11.2.2
11.20.0-rc1
11.20.0-rc2
11.20.0-rc3
11.21.0
11.21.0-rc1
11.21.0-rc2
11.21.0-rc3
11.21.1
11.22.0-rc1
11.3.0
11.3.0-rc1
11.3.0-rc2
11.4.0
11.4.0-rc1
11.4.0-rc2
11.4.0-rc3
11.5.0
11.5.0-rc1
11.5.0-rc2
11.5.1
11.6-cert11
11.6.0
11.6.0-rc1
11.6.0-rc2
11.6.1
11.7.0
11.7.0-rc1
11.7.0-rc2
11.8.0
11.8.0-rc1
11.8.0-rc2
11.8.0-rc3
11.8.1
11.9.0
11.9.0-rc1
11.9.0-rc2
11.9.0-rc3
12.0.0
12.0.0-alpha1
12.0.0-alpha2
12.0.0-beta1
12.0.0-beta2
12.1.0
12.1.0-rc1
12.1.0-rc2
12.1.0-rc3
12.1.1
12.2.0
12.2.0-rc1
12.2.0-rc2
12.2.0-rc3
12.3.0
12.3.0-rc1
12.3.0-rc2
12.3.1
12.3.2
12.4.0
12.4.0-rc1
12.5.0
12.5.0-rc1
12.5.1
12.6.0
12.6.0-rc1
12.6.1
12.7.0
12.7.0-rc1
12.7.0-rc2
12.7.1
12.7.2
12.8.0
12.8.0-rc1
12.8.0-rc2
12.8.1
12.8.2
13.0.0
13.0.0-beta1
13.0.0-beta2
13.0.0-beta3
13.0.1
13.0.2
13.1-cert2
13.1.0
13.1.0-rc1
13.1.0-rc2
13.1.1
13.2.0
13.2.0-rc1
13.2.1
13.3.0
13.3.0-rc1
13.3.1
13.3.2
13.4.0-rc1
13.5.0-rc1
13.6.0-rc1
13.6.0-rc2
13.6.0-rc3
13.7.0
13.7.0-rc1
13.7.0-rc2
13.7.0-rc3
13.7.1
13.8.0-rc1
certified/1.8.11-cert1
certified/1.8.11-cert10
certified/1.8.11-cert2
certified/1.8.11-cert3-rc1
certified/1.8.11-cert3-rc2
certified/1.8.11-cert4
certified/1.8.11-cert5
certified/1.8.11-cert5-rc1
certified/1.8.11-cert5-rc2
certified/1.8.11-cert6
certified/1.8.11-cert7
certified/1.8.11-cert8
certified/1.8.11-cert9
certified/1.8.11-cert9-rc1
certified/1.8.15-cert1
certified/1.8.15-cert1-rc1
certified/1.8.15-cert1-rc2
certified/1.8.15-cert1-rc3
certified/1.8.15-cert2
certified/1.8.15-cert3
certified/1.8.15-cert4
certified/1.8.15-cert5
certified/1.8.15-cert6
certified/1.8.15-cert7
certified/1.8.28-cert1
certified/1.8.28-cert1-rc1
certified/1.8.28-cert2
certified/1.8.28-cert3
certified/1.8.28-cert4
certified/1.8.28-cert5
certified/1.8.6-cert1
certified/11.2-cert1
certified/11.2-cert1-rc1
certified/11.2-cert1-rc2
certified/11.2-cert2
certified/11.2-cert3
certified/11.6-cert1
certified/11.6-cert1-rc1
certified/11.6-cert1-rc2
certified/11.6-cert10
certified/11.6-cert11
certified/11.6-cert12
certified/11.6-cert2
certified/11.6-cert3
certified/11.6-cert4
certified/11.6-cert5
certified/11.6-cert6
certified/11.6-cert7
certified/11.6-cert8
certified/11.6-cert9
certified/13.1-cert1
certified/13.1-cert1-rc1
certified/13.1-cert1-rc2
certified/13.1-cert1-rc3
certified/13.1-cert2
certified/13.1-cert3
${ noResults }
2701 Commits (cef5e9d4340f94de8801aaecfb004a080df8a68f)
| Author | SHA1 | Message | Date |
|---|---|---|---|
|
|
c8fbace2ba |
Makes parking lots clear and rebuild properly when features reload is invoked from CLI
Before, default parkinglot in context parkedcalls with ext 700 would always be present and when reload was invoked, the previous parkinglots would not be cleared. (closes issue #18801) Reported by: mickecarlsson Review: https://reviewboard.asterisk.org/r/1161/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.2@313047 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
15 years ago |
|
|
1c272a5d15 |
Merged revisions 312761 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4 ........ r312761 | mnicholson | 2011-04-05 09:10:34 -0500 (Tue, 05 Apr 2011) | 8 lines Limit the number of unauthenticated manager sessions and also limit the time they have to authenticate. AST-2011-005 (closes issue #18996) Reported by: tzafrir Tested by: mnicholson ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.2@312764 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
15 years ago |
|
|
82f042979f |
Merged revisions 312285 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4 ........ r312285 | tilghman | 2011-04-01 05:36:42 -0500 (Fri, 01 Apr 2011) | 7 lines Found some leaking file descriptors while looking at ast_FD_SETSIZE dead code. (issue #18969) Reported by: oej Patches: 20110315__issue18969__14.diff.txt uploaded by tilghman (license 14) ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.2@312287 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
15 years ago |
|
|
c2d1e38d80 |
When comebacktoorigin=no, Asterisk no longer tries to dial extension <Originating Channe>@parkedcalltimeout and instead dials s without going through fallback.
(closes issue #18650) Reported by: davidw Patches: patch.diff uploaded by jrose (license 1225) https://reviewboard.asterisk.org/r/1150/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.2@311844 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
15 years ago |
|
|
399854127f |
Don't write items to the manager socket twice.
AST-2011-003 (closes issue 0018987) Reported by: ks-steven git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.2@311140 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
15 years ago |
|
|
7981744453 |
Fix crash on fdopen failure
See security advisory AST-2011-004 (closes issue #18845) Reported by: cmaj Patches: patch-main-tcptls-1.8.3-rc2-open-session-crash-take2.diff.txt uploaded by cmaj (license 830) patch-main-tcptls-1.8.3-rc2-open-session-crash-take3.diff.txt uploaded by cmaj (license 830) Tested by: cmaj, twilson git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.2@310998 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
15 years ago |
|
|
e830fbd5ab |
Revert patch with accidental reversion of a previous patch
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.2@310997 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
15 years ago |
|
|
61856614c3 |
Fix crash on fdopen failure
See security advisory AST-2011-004 (closes issue #18845) Reported by: cmaj Patches: patch-main-tcptls-1.8.3-rc2-open-session-crash-take2.diff.txt uploaded by cmaj (license 830) patch-main-tcptls-1.8.3-rc2-open-session-crash-take3.diff.txt uploaded by cmaj (license 830) Tested by: cmaj, twilson git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.2@310996 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
15 years ago |
|
|
8ae012e658 |
Don't keep trying to write to a closed connection
See security advisory AST-2011-003. git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.2@310992 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
15 years ago |
|
|
20e1c5b4a8 |
Merged revisions 310888 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4 ........ r310888 | twilson | 2011-03-16 11:58:42 -0500 (Wed, 16 Mar 2011) | 29 lines Don't delay DTMF in core bridge while listening for DTMF features This patch is mostly the work of Olle Johansson. I did some cleanup and added the silence generating code if transmit_silence is set. When a channel listens for DTMF in the core bridge, the outbound DTMF is not sent until we have received DTMF_END. For a long DTMF, this is a disaster. We send 4 seconds of DTMF to Asterisk, which sends no audio for those 4 seconds. Some products see this delay and the time skew on RTP packets that results and start ignoring the audio that is sent afterward. With this change, the DTMF_BEGIN frame is inspected and checked. If it matches a feature code, we wait for DTMF_END and activate the feature as before. If transmit_silence=yes in asterisk.conf, silence is sent if we paritally match a multi-digit feature. If it doesn't match a feature, the frame is forwarded along with the DTMF_END without delay. By doing it this way, DTMF is not delayed. (closes issue #15642) Reported by: jasonshugart Patches: issue_15652_dtmf_ast-1.4.patch.txt uploaded by twilson (license 396) Tested by: globalnetinc, jde (closes issue #16625) Reported by: sharvanek Review: https://reviewboard.asterisk.org/r/1092/ Review: https://reviewboard.asterisk.org/r/1125/ ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.2@310889 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
15 years ago |
|
|
22540b3198 |
Merged revisions 310779 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4 ........ r310779 | alecdavis | 2011-03-15 13:26:09 +1300 (Tue, 15 Mar 2011) | 10 lines core show locks: display ThreadID in hexadecimal Allow easier cross referencing of thread ID's with GDB backtraces (closes issue #18968) Reported by: alecdavis Patches: bug18968.diff.txt uploaded by alecdavis (license 585) ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.2@310780 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
15 years ago |
|
|
b426ade142 |
Merged revisions 310633 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4 ........ r310633 | rmudgett | 2011-03-14 11:38:24 -0500 (Mon, 14 Mar 2011) | 25 lines "Caller*ID failed checksum" on Wildcard TDM2400P and TDM410 The last character in the caller id message is getting a framing error. The checksum is the last character in the message. A framing error in the checksum could be because: 1) The sender did not send a full stop bit. 2) The sender cut off the FSK carrier too soon. 3) The sender opted to send zero of the specified zero to 10 trailing mark bits and round-off errors in the code resulted in the code not being where it thought it was in the demodulated bit stream. Bit 8 of 'b' is set when parity error. Bit 9 of 'b' is set when framing error. Made ignore the framing and parity error bits if the errored character is the checksum. We can tolerate a framing/parity error there. The checksum character validates the message. (closes issue #18474) Reported by: nivek Patches: callerid.c.1.patch uploaded by nivek (license 636) (with modifications) Tested by: nivek ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.2@310635 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
15 years ago |
|
|
c4a2dfae6a |
Missed part of the conversion when we started passing ppid to astcanary.
(closes issue #18850) Reported by: viraptor Patches: canary_ppid.patch uploaded by viraptor (license 543) git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.2@309677 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
15 years ago |
|
|
85a049ff26 |
Revert previous 2 commits, and instead conditionally redefine the same macro used in flex 2.5.35 that clashed with our workaround.
Not surprisingly, the workaround was exactly the same code as was provided by the Flex maintainers, albeit in two different places, in different macros. This should fix the FreeBSD builds, which have an older version of Flex. git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.2@309251 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
15 years ago |
|
|
d8bc2281bb |
A later version of flex already includes the fwrite workaround code, which if used twice causes a compilation error.
Detect whether Flex will compile without the workaround; if so, suppress our workaround code. git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.2@309033 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
15 years ago |
|
|
65f88d94cb |
Merged revisions 308813 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4 ........ r308813 | twilson | 2011-02-24 11:42:16 -0600 (Thu, 24 Feb 2011) | 12 lines Don't broadcast FullyBooted to every AMI connection The FullyBooted event should not be sent to every AMI connection every time someone connects via AMI. It should only be sent to the user who just connected. (closes issue #18168) Reported by: FeyFre Patches: bug0018168.patch uploaded by FeyFre (license 1142) Tested by: FeyFre, twilson ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.2@308814 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
15 years ago |
|
|
b8c403161c |
Merged revisions 308721 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4 ........ r308721 | mnicholson | 2011-02-24 08:54:56 -0600 (Thu, 24 Feb 2011) | 2 lines silence gcc 4.2 compiler warning ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.2@308722 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
15 years ago |
|
|
29469758df |
Merge missing bugfix for issue #11583
This is the combination of two commits that made it into 1.4, 1.6.0, 1.6.1, and trunk (and therefor 1.8) but that was missed for 1.6.2. ........ r183386 | dvossel | 2009-03-19 14:40:07 -0500 (Thu, 19 Mar 2009) | 6 lines Cleaning up a few things in detect disconnect patch Initialized ast_call_feature in detect_disconnect to avoid accessing uninitialized memory. Cleaned up /param tags in features.h. No longer send dynamic features in ast_feature_detect. issue #11583 ........ ........ r183126 | dvossel | 2009-03-19 11:15:16 -0500 (Thu, 19 Mar 2009) | 17 lines Allow disconnect feature before a call is bridged feature.conf has a disconnect option. By default this option is set to '*', but it could be anything. If a user wishes to disconnect a call before the other side answers, only '*' will work, regardless if the disconnect option is set to something else. This is because features are unavailable until bridging takes place. The default disconnect option, '*', was hardcoded in app_dial, which doesn't make any sense from a user perspective since they may expect it to be something different. This patch allows features to be detected from outside of the bridge, but not operated on. In this case, the disconnect feature can be detected before briding and handled outside of features.c. (closes issue #11583) Reported by: sobomax Patches: patch-apps__app_dial.c uploaded by sobomax (license 359) 11583.latest-patch uploaded by murf (license 17) detect_disconnect.diff uploaded by dvossel (license 671) Tested by: sobomax, dvossel Review: http://reviewboard.digium.com/r/195/ ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.2@308677 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
15 years ago |
|
|
2cb53e3d98 |
Add HTTP URI log, use ast_debug for console logging
Guessed the log levels based on info that level 3 is the soft roof. Can we create a page / document to define the levels? git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.2@308528 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
15 years ago |
|
|
23b4073184 |
Merged revisions 308413 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4 ........ r308413 | mnicholson | 2011-02-21 08:57:15 -0600 (Mon, 21 Feb 2011) | 5 lines Properly check the bounds of arrays when decoding UDPTL packets. Also, remove broken support for receiving UDPTL packets larger than 16k. That shouldn't ever happen anyway. AST-2011-002 FAX-281 ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.2@308414 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
15 years ago |
|
|
ee1a03e4d8 |
Add CSS MIME Type
Modern browsers are checking for the MIME Type of pages and in some cases will not load a file if the type is wrong. git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.2@308329 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
15 years ago |
|
|
daf3853e6c |
Merged revisions 307534 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4 ........ r307534 | qwell | 2011-02-10 16:33:09 -0600 (Thu, 10 Feb 2011) | 8 lines Remove color when executing commands via a remote console. Essentially this makes '-x' imply '-n' on rasterisk. This was done in a different and incomplete way previously, which I'm reverting here. (issue #18776) Reported by: alecdavis ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.2@307535 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
15 years ago |
|
|
36d6bd2396 |
Make sure to set parking dial context for non-default parking lots.
Since parking_con_dial isn't settable, set all parking lots to "park-dial". (closes issue #17946) Reported by: bluecrow76 Patches: asterisk-1.8.0-beta4-multipark-fixes-2010SEP02.diff uploaded by bluecrow76 (license 270) modified by me git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.2@307227 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
15 years ago |
|
|
4cefaad7a0 |
Merged revisions 306672 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4 ........ r306672 | twilson | 2011-02-07 14:35:20 -0800 (Mon, 07 Feb 2011) | 10 lines Don't try to pickup a call in the middle of a masquerade If A calls B which doesn't answer and C & D both try to do a call pickup, it is possible for ast_pickup_call to answer the call, then fail to masquerade one of the calls because the other one is already in the process of masquerading. This patch checks to see if the channel is in the process of masquerading before call before selecting it for a pickup. Review: https://reviewboard.asterisk.org/r/1094/ ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.2@306673 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
15 years ago |
|
|
b620129580 |
Set exception on channel in parking thread when POLLPRI event detected.
This is done just to make the code be equivalent to the old select code. As noted in 303106 the same issue was already fixed in this branch, but the exception was not set on the channel in the case of POLLPRI. The reason that this did not cause a problem here is because in 122923 the check in __ast_read to check the exception flag was removed. (related to #18637) git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.2@306123 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
15 years ago |
|
|
050a3c39ec |
Merged revisions 305888 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4 ........ r305888 | rmudgett | 2011-02-02 18:02:43 -0600 (Wed, 02 Feb 2011) | 8 lines Minor AST_FRAME_TEXT related issues. * Include the null terminator in the buffer length. When the frame is queued it is copied. If the null terminator is not part of the frame buffer length, the receiver could see garbage appended onto it. * Add channel lock protection with ast_sendtext(). * Fixed AMI SendText action ast_sendtext() return value check. ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.2@305889 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
15 years ago |
|
|
f2afe6299a |
Asterisk HTTP response Content-type
Address content type for BSD and other platforms (closes issue #18456) Reported by: alexo Patches: asterisk18_http.patch uploaded by alexo (license 1175) Tested by: alexo git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.2@305082 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
15 years ago |
|
|
7fde40240f |
Change delimiter used internally for GOTO_ON_BLINDXFR to commas to match 76703.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.2@304338 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
15 years ago |
|
|
77919e528e |
Merged revisions 304242 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4 ........ r304242 | mmichelson | 2011-01-26 14:38:37 -0600 (Wed, 26 Jan 2011) | 3 lines Get rid of unused 'verbose' field in ast_udptl ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.2@304250 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
15 years ago |
|
|
3ef4c6820e |
Per the man page, setvbuf() must be called before any other operation on an open file.
We use setvbuf() to associate a buffer with a stream, but we have already written to the open file. This works (by chance) on Linux, but fails on other platforms, such as OpenSolaris. (closes issue #16610) Reported by: bklang Patches: setvbuf.patch uploaded by crjw (license 963) Tested by: bklang, asgaroth, efutch git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.2@304096 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
15 years ago |
|
|
418ce98827 |
Merged revisions 304005 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4 ........ r304005 | rmudgett | 2011-01-25 17:21:09 -0600 (Tue, 25 Jan 2011) | 8 lines DTMF attended transfers sometimes fail for no apparent reason. The loop in feature_request_and_dial() can exit when Party C has answered without processing an AST_CONTROL_ANSWER. Also sometimes an AST_CONTROL_ANSWER never happens even though Party C has answered. Don't hangup Party C if he is up or we receive an AST_CONTROL_ANSWER. ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.2@304006 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
15 years ago |
|
|
0f8989a993 |
Merged revisions 303546 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4 ........ r303546 | russell | 2011-01-24 14:32:21 -0600 (Mon, 24 Jan 2011) | 31 lines Fix channel redirect out of MeetMe() and other issues with channel softhangup. Mantis issue #18585 reports that a channel redirect out of MeetMe() stopped working properly. This issue includes a patch that resolves the issue by removing a call to ast_check_hangup() from app_meetme.c. I left that in my patch, as it doesn't need to be there. However, the rest of the patch fixes this problem with or without the change to app_meetme. The key difference between what happens before and after this patch is the effect of the END_OF_Q control frame. After END_OF_Q is hit in ast_read(), ast_read() will return NULL. With the ast_check_hangup() removed, app_meetme sees this which causes it to exit as intended. Checking ast_check_hangup() caused app_meetme to exit earlier in the process, and the target of the redirect saw the condition where ast_read() returned NULL. Removing ast_check_hangup() works around the issue in app_meetme, but doesn't solve the issue if another application did the same thing. There are also other edge cases where if an application finishes at the same time that a redirect happens, the target of the redirect will think that the channel hung up. So, I made some changes in pbx.c to resolve it at a deeper level. There are already places that unset the SOFTHANGUP_ASYNCGOTO flag in an attempt to abort the hangup process. My patch extends this to remove the END_OF_Q frame from the channel's read queue, making the "abort hangup" more complete. This same technique was used in every place where a softhangup flag was cleared. (closes issue #18585) Reported by: oej Tested by: oej, wedhorn, russell Review: https://reviewboard.asterisk.org/r/1082/ ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.2@303548 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
15 years ago |
|
|
8d40dc2122 |
main/features: Use POLLPRI when waiting for events on parked channels.
This change resolves a regression in the 1.6.2 when converting from select to poll. The DAHDI timers use POLLPRI to indicate that the timer fired, but features was not waiting for that flag. The result was no audio for MOH when a call was parked and res_timing_dahdi was in use. This patch is slightly modified from the one on the mantis issue. It does not set an exception on the channel if the POLLPRI flag is set. (closes issue #18262) Reported by: francesco_r Patches: patch_park_moh-trunk-2.txt uploaded by cjacobsen (license 1029) Tested by: francesco_r, rfrantik, one47 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.2@303106 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
15 years ago |
|
|
7289113d93 |
Turn a noisy verbose message into a debug message.
This can drown your console if you're using the AMI over HTTP. git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.2@302788 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
15 years ago |
|
|
1ce0e49b02 |
Merged revisions 302671 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4 ........ r302671 | rmudgett | 2011-01-19 15:21:56 -0600 (Wed, 19 Jan 2011) | 15 lines DTMF transfer plays the wrong sounds for wrong number or other call failure. * Set the default for features.conf.sample xferfailsound option to "beeperr" as documented instead of "pbx-invalid" and corrected the use of it in DTMF blind transfer (#1). * Improved DTMF blind transfer handling of wrong numbers. Most of the concerns in this issue were taken care of by the patch for issue 17999: Issues with DTMF triggered attended transfers. (closes issue #18379) Reported by: gincantalupo Tested by: rmudgett ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.2@302693 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
15 years ago |
|
|
676b6cf22f |
Kill zombies.
When we ast_safe_fork() with a non-zero argument, we're expected to reap our own zombies. On a zero argument, however, the zombies are only reaped when there aren't any non-zero forked children alive. At other times, we accumulate zombies. This code is forward ported from res_agi in 1.4, so that forked children are always reaped, thus preventing an accumulation of zombie processes. (closes issue #18515) Reported by: ernied Patches: 20101221__issue18515.diff.txt uploaded by tilghman (license 14) Tested by: ernied git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.2@302599 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
15 years ago |
|
|
7d8cdc8c05 |
Don't call strlen() when we only need to look at the next character or two.
(closes issue #18042) Reported by: wdoekes Patches: astsvn-inefficient-ast-uri-decode.patch uploaded by wdoekes (license 717) git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.2@302554 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
15 years ago |
|
|
faaebdfa2b |
Remove an extraneous \r\n at the end of a parking manager events.
(closes issue #18363) Reported by: clegall_proformatique Patches: asterisk_1.8_295998_parking_manager_events_format.patch uploaded by clegall proformatique (license 1139) git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.2@302551 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
15 years ago |
|
|
24fbdc445b |
Make sure that h_length is set when we short-circuit out of ast_gethostbyname.
(closes issue #16135) Reported by: thedavidfactor Patches: utils.patch uploaded by thedavidfactor (license 903) git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.2@302504 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
15 years ago |
|
|
7ca6a0e2bd |
Convert device state callbacks to ao2 objects to fix a deadlock in chan_sip.
Lock scenario presented here: Thread 1 holds ast_rdlock_contexts &conlock holds handle_statechange hints holds handle_statechange hint waiting for cb_extensionstate Locked Here: chan_sip.c line 7428 (find_call) Thread 2 holds handle_request_do &netlock holds find_call sip_pvt_ptr waiting for ast_rdlock_contexts &conlock Locked Here: pbx.c line 9911 (ast_rdlock_contexts) Chan_sip has an established locking order of locking the sip_pvt and then getting the context lock. So the as stated by the summary, the operations in thread 2 have been modified to no longer require the context lock. (closes issue #18310) Reported by: one47 Patches: statecbs_ao2.mk2.patch uploaded by one47 (license 23), modified by me Review: https://reviewboard.asterisk.org/r/1072/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.2@302265 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
15 years ago |
|
|
f78288c30b |
Merged revisions 302172 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4 ........ r302172 | rmudgett | 2011-01-18 12:04:36 -0600 (Tue, 18 Jan 2011) | 88 lines Issues with DTMF triggered attended transfers. Issue #17999 1) A calls B. B answers. 2) B using DTMF dial *2 (code in features.conf for attended transfer). 3) A hears MOH. B dial number C 4) C ringing. A hears MOH. 5) B hangup. A still hears MOH. C ringing. 6) A hangup. C still ringing until "atxfernoanswertimeout" expires. For v1.4 C will ring forever until C answers the dead line. (Issue #17096) Problem: When A and B hangup, C is still ringing. Issue #18395 SIP call limit of B is 1 1. A call B, B answered 2. B *2(atxfer) call C 3. B hangup, C ringing 4. Timeout waiting for C to answer 5. Recall to B fails because B has reached its call limit. Because B reached its call limit, it cannot do anything until the transfer it started completes. Issue #17273 Same scenario as issue 18395 but party B is an FXS port. Party B cannot do anything until the transfer it started completes. If B goes back off hook before C answers, B hears ringback instead of the expected dialtone. ********** Note for the issue #17273 and #18395 fix: DTMF attended transfer works within the channel bridge. Unfortunately, when either party A or B in the channel bridge hangs up, that channel is not completely hung up until the transfer completes. This is a real problem depending upon the channel technology involved. For chan_dahdi, the channel is crippled until the hangup is complete. Either the channel is not useable (analog) or the protocol disconnect messages are held up (PRI/BRI/SS7) and the media is not released. For chan_sip, a call limit of one is going to block that endpoint from any further calls until the hangup is complete. For party A this is a minor problem. The party A channel will only be in this condition while party B is dialing and when party B and C are conferring. The conversation between party B and C is expected to be a short one. Party B is either asking a question of party C or announcing party A. Also party A does not have much incentive to hangup at this point. For party B this can be a major problem during a blonde transfer. (A blonde transfer is our term for an attended transfer that is converted into a blind transfer. :)) Party B could be the operator. When party B hangs up, he assumes that he is out of the original call entirely. The party B channel will be in this condition while party C is ringing, while attempting to recall party B, and while waiting between call attempts. WARNING: The ATXFER_NULL_TECH conditional is a hack to fix the problem. It will replace the party B channel technology with a NULL channel driver to complete hanging up the party B channel technology. The consequences of this code is that the 'h' extension will not be able to access any channel technology specific information like SIP statistics for the call. ATXFER_NULL_TECH is not defined by default. ********** (closes issue #17999) Reported by: iskatel Tested by: rmudgett JIRA SWP-2246 (closes issue #17096) Reported by: gelo Tested by: rmudgett JIRA SWP-1192 (closes issue #18395) Reported by: shihchuan Tested by: rmudgett (closes issue #17273) Reported by: grecco Tested by: rmudgett Review: https://reviewboard.asterisk.org/r/1047/ ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.2@302173 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
15 years ago |
|
|
6adc202b2c |
Removed a usleep(1) that shouldn't be necessary in session_do, and removed the
ms_t member from the mansession_session structure. Merged revisions 301591 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/1.4 ........ r301591 | mnicholson | 2011-01-12 12:39:03 -0600 (Wed, 12 Jan 2011) | 5 lines Don't store the thread id for the manager session in the structure we pass to the thread for the manager session. ABE-2543 ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.2@301594 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
15 years ago |
|
|
ac9c6a3692 |
Merged revisions 301502 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4 ........ r301502 | jpeeler | 2011-01-12 12:10:42 -0600 (Wed, 12 Jan 2011) | 12 lines Fix CPU spike when pressing DTMF after agent login. The problem here is that DTMF was being continuously deferred and requeued since ast_safe_sleep is called in a loop. There are serveral other places in the code that sleeps and then loops in a similar fashion. Because of this fact I opted to not defer DTMF any more, which will not affect the original fix: https://reviewboard.asterisk.org/r/674 (closes issue #18130) Reported by: rgj ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.2@301503 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
15 years ago |
|
|
423fa1a875 |
Merged revisions 301305 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4 ........ r301305 | mnicholson | 2011-01-11 12:34:40 -0600 (Tue, 11 Jan 2011) | 4 lines Prevent buffer overflows in ast_uri_encode() ABE-2705 ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.2@301307 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
15 years ago |
|
|
f97b1161de |
Fix backwards and broken XML documentation.
(closes issue #18547) Reported by: jcovert Patches: xmldoc.c.patch uploaded by jcovert (license 551) chan_iax2.c.doc.patch uploaded by jcovert (license 551) chan_sip.c.patch uploaded by jcovert (license 551) chan_agent.c.patch uploaded by jcovert (license 551) git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.2@300520 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
15 years ago |
|
|
828635332e |
Use correct variable for atxfercallbackretries config option.
* Misc formatting changes. git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.2@300165 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
15 years ago |
|
|
d2619c264a |
Note that Park() timeout is milliseconds.
(closes issue #15758) Reported by: mmurdock Tested by: mmurdock, seanbright git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.2@299087 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
15 years ago |
|
|
9fb5ffe7b5 |
Remove backtrace used for testing merge process
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.2@298962 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
15 years ago |
|
|
fb52725167 |
Merged revisions 298905 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4 ........ r298905 | tilghman | 2010-12-17 15:40:56 -0600 (Fri, 17 Dec 2010) | 6 lines Let Asterisk find better backtrace information with libbfd. The menuselect option BETTER_BACKTRACES, if enabled, will use libbfd to search for better symbol information within both the Asterisk binary, as well as loaded modules, to assist when using inline backtraces to track down problems. ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.2@298957 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
15 years ago |
|
|
942d26cc5a |
Merged revisions 298345 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4 ........ r298345 | seanbright | 2010-12-15 16:28:29 -0500 (Wed, 15 Dec 2010) | 6 lines Fix reference and container leaks when running 'astobj2 test.' We need to make sure that ao2_iterator_destroy is called once for each time that ao2_iterator_init is called. Also make sure to unref a newly allocated object that we've linked into a container. ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.2@298346 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
15 years ago |