Because of a copy-and-paste error when the struct ast_sockaddr changed,
tlsbindaddr was not added, when sip.conf contained autodomain=yes; see
"show sip domains" on the command-line interface (CLI) of Asterisk.
ASTERISK-27106
Change-Id: I3d0957150017c223136968ef1266f275d0d6695e
When connected_line_method is "invite", we're supposed to determine
if the client can support UPDATE and if it can, send UPDATE instead
of INVITE to avoid the SDP renegotiation. Not only was pjproject
not setting the PJSIP_INV_SUPPORT_UPDATE flag, we were testing
that invite_tsx wasn't NULL which isn't always the case.
* Updated chan_pjsip/update_connected_line_information to drop the
requirement that invite_tsx isn't NULL.
* Submitted patch to pjproject sip_inv.c that sets the
PJSIP_INV_SUPPORT_UPDATE flag correctly.
* Updated pjsip.conf.sample to clarify what happens when "invite"
is specified.
ASTERISK-27095
Change-Id: Ic2381b3567b8052c616d96fbe79564c530e81560
The existing auto dtmf mode reverts to inband if 4733 fails to be
negotiated. This patch adds a new mode auto_info which will
switch to INFO instead of inband if 4733 is not available.
ASTERISK-27066 #close
Change-Id: Id185b11e84afd9191a2f269e8443019047765e91
The stream topology (list of streams and order) is now stored with the
configured PJSIP endpoints and used during the negotiation process.
Media negotiation state information has been changed to be stored
in a separate object. Two of these objects exist at any one time
on a session. The active media state information is what was previously
negotiated and the pending media state information is what the
media state will become if negotiation succeeds. Streams and other
state information is stored in this object using the index (or
position) of each individual stream for easy lookup.
The ability for a media type handler to specify a callback for
writing has been added as well as the ability to add file
descriptors with a callback which is invoked when data is available
to be read on them. This allows media logic to live outside of
the chan_pjsip module.
Direct media has been changed so that only the first audio and
video stream are directly connected. In the future once the RTP
engine glue API has been updated to know about streams each individual
stream can be directly connected as appropriate.
Media negotiation itself will currently answer all the provided streams
on an offer within configured limits and on an offer will use the
topology created as a result of the disallow/allow codec lines.
If a stream has been removed or declined we will now mark it as such
within the resulting SDP.
Applications can now also request that the stream topology change.
If we are told to do so we will limit any provided formats to the ones
configured on the endpoint and send a re-invite with the new topology.
Two new configuration options have also been added to PJSIP endpoints:
max_audio_streams: determines the maximum number of audio streams to
offer/accept from an endpoint. Defaults to 1.
max_video_streams: determines the maximum number of video streams to
offer/accept from an endpoint. Defaults to 1.
ASTERISK-27076
Change-Id: I8afd8dd2eb538806a39b887af0abd046266e14c7
The construction of the returned string assumed incorrectly that the
supplied buffer would always be initialized as an empty string. If it is
not an empty string we could overrun the supplied buffer by the length of
the non-empty buffer string plus one. It is also theoreticaly possible
for the supplied buffer to be overrun by a string terminator during a read
operation even if the supplied buffer is an empty string.
* Fix the assumption that the supplied buffer would already be an empty
string. The buffer is not guaranteed to contain an empty string by all
possible callers.
* Fix string terminator buffer overrun potential.
Change-Id: If6a0806806527678c8554b1dcb34fd7808aa95c9
The chan_pjsip module uses a calculation approach for
determining device state. This means that in situations
where we would expect device state to change we need to
tell the core to query. A scenario that was missed is
when early media was signaled.
This change adds the notification for the core to
query device state when we are told that early media
is being provided.
ASTERISK-27039
Change-Id: Iafebfd152894966344ff2e950a3cee9f59a3eb6f
PJSIP support in Asterisk differs from chan_sip in that it
allows media to be sent as-is without transcoding provided
the codecs were negotiated in the SDP. This is allowed
according to the RFC. Support for this differs quite a lot
though and some endpoints do not handle it well.
This change extends the 'asymmetric_rtp_codec' option to
also cover this case. When set to no (the default) the code
behaves as chan_sip does - the best codec is selected and
we will only ever send that, unless we change what we are
sending if the remote side changes. When set to yes we
will send media as-is without transcoding if the codec
has been negotiated in the SDP.
ASTERISK-26996
Change-Id: Ib1647f6902a0843e8c435946f831c2159e8d1d51
This introduces the ability for PJSIP code to specify filtering flags
when retrieving PJSIP contacts. The first flag for use causes the
query code to only retrieve contacts that are not unreachable. This
change has been leveraged by both the Dial() process and the
PJSIP_DIAL_CONTACTS dialplan function so they will now only attempt
calls to contacts which are not unreachable.
ASTERISK-26281
Change-Id: I8233b4faa21ba3db114f5a42e946e4b191446f6c
If we are offered or are offering RTCP-MUX, don't consider RTCP ICE
candidates. This confuses certain browsers (current Firefox for
example) and causes intial audio setup delays.
ASTERISK-26982 #close
Change-Id: Ifeaf47e83972fe8dbe58b7fb3d6d1823400cfb91
The while(1) loop in skinny_session wasn't checking for EOF so
a packet that was longer than a header but still truncated
would spin the while loop infinitely. Not only does this
permanently tie up a thread and drive a core to 100% utilization,
the call of ast_log() in such a tight loop eats all available
process memory.
Added poll with timeout to top of read loop
ASTERISK-26940 #close
Reported-by: Sandro Gauci
Change-Id: I2ce65f3c5cb24b4943a9f75b64d545a1e2cd2898
If you use ast_request to create a PJSIP channel but then hang it
up without causing a transaction to be sent, the session will
never be destroyed. This is due ot the fact that it's pjproject
that triggers the session cleanup when the transaction ends.
app_chanisavail was doing this to get more granular channel state
and it's also possible for this to happen via ARI.
* ast_sip_session_terminate was modified to explicitly call the
cleanup tasks and unreference session if the invite state is NULL
AND invite_tsx is NULL (meaning we never sent a transaction).
* chan_pjsip/hangup was modified to bump session before it calls
ast_sip_session_terminate to insure that session stays valid
while it does its own cleanup.
* Added test events to session_destructor for a future testsuite
test.
ASTERISK-26908 #close
Reported-by: Richard Mudgett
Change-Id: I52daf6f757184e5544c261f64f6fe9602c4680a9
For outgoing TCP connections, Asterisk uses the first IP address of the
interface instead of the IP address we asked him to bind to.
ASTERISK-26922 #close
Reported-by: Ksenia
Change-Id: I43c71ca89211dbf1838e5bcdb9be8d06d98e54eb
Some equipments may send a re-INVITE containing an SDP in the final ACK
request. If this happens in the context of direct media, the remote end
should be updated with a re-INVITE.
This patch queues an "update RTP peer" frame to trigger the re-INVITE,
instead of the "source change" frame wich was used previously.
ASTERISK-26951
Change-Id: I3644d2025f20e086ea9f8f62b486172c52b5b2e6
This saves around 100 bytes when G.711, G.722, G.729, and GSM are advertised in
SDP. This reduces the chance to hit the MTU bearer of 1300 bytes for SIP over
UDP, if many codecs are allowed in Asterisk. This new feature is enabled
together with the optional feature compact_headers=yes via the file pjsip.conf.
ASTERISK-26932 #close
Change-Id: Iaa556ab4c8325cd34c334387ab2847fab07b1689
In all non-pbx modules, AST_MODULE_LOAD_FAILURE has been changed
to AST_MODULE_LOAD_DECLINE. This prevents asterisk from exiting
if a module can't be loaded. If the user wishes to retain the
FAILURE behavior for a specific module, they can use the "require"
or "preload-require" keyword in modules.conf.
A new API was added to logger: ast_is_logger_initialized(). This
allows asterisk.c/check_init() to print to the error log once the
logger subsystem is ready instead of just to stdout. If something
does fail before the logger is initialized, we now print to stderr
instead of stdout.
Change-Id: I5f4b50623d9b5a6cb7c5624a8c5c1274c13b2b25
SIP user-agents indicate which protocol extensions are allowed in headers
like Supported and Required. Such protocol extensions are Session Timers
(RFC 4028) for example. Session Timers are supported since Mantis-10665.
Since ASTERISK-21721, not only the first but multiple Supported/Required
headers in a message are parsed. In that change, an existing variable was
re-used within a newly added do-loop. Currently, at the end of that loop,
that variable is an empty string always. Previously, that variable was used
within log output. However, the log output was not changed.
ASTERISK-26915 #close
Change-Id: I09315f31b4d78fb214bb2a9fb6c0f5e143eae990
POSIX does not require getprotobyname() to be thread safe and some
implementations use static memory which causes issues when multiple
threads are used.
Further, our usage of it today is just to ultimately get IPPROTO_TCP
for calls to setsockopt(). So instead we just use IPPROTO_TCP directly.
Change-Id: I2e14e58674808f7ce99b2f5e900d0f90d0d8da48
When using a non-dynamic peer address, build_peer() invalidates the
peer address structure by setting the address family to unspecified.
However, if dnsmgr is enabled, the subsequent call to ast_dnsmgr_lookup()
will not amend the peer address if the cache is still valid, resulting
in peer connectivity failures.
To fix this, we call ast_dnsmgr_refresh() instead.
ASTERISK-26865
Change-Id: Id8a89a2f771ebbaf32255a35fe596a6dcb97a082
When querying for PJSIP specific information using the dialplan
function CHANNEL() it is possible that the underlying session
will no longer have a channel associated with it. This is
most likely to occur when the RTCP HEP module attempts to get
the channel name. If this happens then a crash will occur.
This change just adds a check that the channel exists on the
session before querying it.
ASTERISK-26857
Change-Id: I113479cffff6ae64cf8ed089e9e1565223426f01
When receiving a 422 response, the invitestate variable must be reset to
INV_CALLING.
ASTERISK-26841
Change-Id: Ia0502d6b02192664cefa4e75bafdd2645ce56099
This change adds a few things to facilitate stream topology changing:
1. Control frame types have been added for use by the channel driver
to notify the application that the channel wants to change the stream
topology or that a stream topology change has been accepted. They are
also used by the indicate interface to the channel that the application
uses to indicate it wants to do the same.
2. Legacy behavior has been adopted in ast_read() such that if a
channel requests a stream topology change it is denied automatically
and the current stream topology is preserved if the application is
not capable of handling streams.
Tests have also been written which confirm the multistream and
non-multistream behavior.
ASTERISK-26839
Change-Id: Ia68ef22bca8e8457265ca4f0f9de600cbcc10bc9
* manager.c:manager_state_cb() Fix potential use of uninitialized hint[]
if a hint does not exist for the requested extension. Ran into this when
developing a testsuite test. The AMI event ExtensionStatus came out with
the hint header value containing garbage. The AMI event PresenceStatus
also had the same issue.
* manager.c:action_extensionstate() no need to completely initialize the
hint[]. Only initialize the first element.
* pbx.c:ast_add_hint() Remove unnecessary assignment.
* chan_sip.c: Eliminate an unneeded hint[] local variable. We only care
about the return value of ast_get_hint() there.
Change-Id: Ia9a8786f01f93f1f917200f0a50bead0319af97b
There is difference exists in behaviour of char type on x86 and ARM.
On x86 by default char variable type means signed char, but in ARM
unsigned char used. This make binary calculations and negative values
works wrong on ARM.
This patch change type of char variables used for store negative
values and binary calculations to signed char.
ASTERISK-26714
Change-Id: Id78716dee9568a58419d4ef63c038affc3dfc7ab
* app_minivm: Use built-in completion facilities to complete optional
arguments.
* app_voicemail: Use built-in completion facilities to complete
optional arguments.
* app_confbridge: Add missing colons after 'Usage' text.
* chan_alsa: Use built-in completion facilities to complete optional
arguments.
* chan_sip: Use built-in completion facilities to complete optional
arguments. Add completions for 'load' for 'sip show user', 'sip show
peer', and 'sip qualify peer.'
* chan_skinny: Correct and extend completions for 'skinny reset' and
'skinny show line.'
* func_odbc: Correct completions for 'odbc read' and 'odbc write'
* main/astmm: Use built-in completion facilities to complete arguments
for 'memory' commands.
* main/bridge: Correct completions for 'bridge kick.'
* main/ccss: Use built-in completion facilities to complete arguments
for 'cc cancel' command.
* main/cli: Add 'all' completion for 'channel request hangup.' Correct
completions for 'core set debug channel.' Correct completions for 'core
show calls.'
* main/pbx_app: Remove redundant completions for 'core show
applications.'
* main/pbx_hangup_handler: Remove unused completions for 'core show
hanguphandlers all.'
* res_sorcery_memory_cache: Add completion for 'reload' argument of
'sorcery memory cache stale' and properly implement.
Change-Id: Iee58c7392f6fec34ad9d596109117af87697bbca
When PJSIP tries to call an endpoint with a domain (e.g. 1000@test.com),
the user part is stripped down as it would be a trunk with a specified user,
and only the host part is called as a PJSIP endpoint and can't be found.
This is not correct in the case of a multidomain SIP account, so the stripping
after the @ sign is done only if the whole endpoint (in multidomain case
1000@test.com) can't be found.
ASTERISK-26248
Change-Id: I3a2dd6f57f3bd042df46b961eccd81d31ab202e6
We shouldn't unlock the channel after starting a snapshot staging because
another thread may interfere and do its own snapshot staging.
* app_dial.c:dial_exec_full() made hold the channel lock while setting up
the outgoing channel staging. Made hold the channel lock after the called
party answers while updating the caller channel staging.
* chan_sip.c:sip_new() completed the channel staging on off-nominal exit.
Also we need to use ast_hangup() instead of ast_channel_unref() at that
location.
* channel.c:__ast_channel_alloc_ap() added a comment about not needing to
complete the channel snapshot staging on off-nominal exit paths.
* rtp_engine.c:ast_rtp_instance_set_stats_vars() made hold the channel
locks while staging the channels for the stats channel variables.
Change-Id: Iefb6336893163f6447bad65568722ad5d5d8212a
The escalator works by creating a set of startup commands in cli.conf
that set up logger channels and issue the debug commands for the
subsystems specified. If asterisk is running when it is executed,
the same commands will be issued to the running instance. The original
cli.conf is saved before any changes are made and can be restored by
executing '$prog --reset'.
The log output will be stored in...
$astlogdir/message.$uniqueid
$astlogdir/debug.$uniqueid
$astlogdir/dtmf.$uniqueid
$astlogdir/fax.$uniqueid
$astlogdir/security.$uniqueid
$astlogdir/pjsip_history.$uniqueid
$astlogdir/sip_history.$uniqueid
Some minor tweaks were made to chan_sip, and res_pjsip_history
so their history output could be send to a log channel as packets
are captured.
A minor tweak was also made to manager so events are output to verbose
when "manager set debug on" is issued.
Change-Id: I799f8e5013b86dc5282961b27383d134bf09e543
After a SIP_CODEC_INBOUND in the dialplan, do not continue with cached formats
but remember the joint format. Cached formats contain default parameters,
often create an empty fmtp line. However, a joint format might have passed
format_get_joint(.) in a res_format_attr_* module (like Opus Codec) and
contain the resulting format parameters from a SDP negotiation.
ASTERISK-26691 #close
Change-Id: I35712d98a793d4c3efdd156cec57deab9014b1dc
The CHANNEL() dialplan function implementation for PJSIP allows
querying of PJSIP specific information. This used the channel
passed in to get the PJSIP session and associated information.
It is possible for this channel to be masqueraded and end
up as a different channel type by the time the information
request is actually acted upon.
This change retrieves the PJSIP session safely and accesses
data from it (including channel). This provides a guarantee
that the session and channel will not be altered when the
request is being acted upon.
ASTERISK-26673
Change-Id: I335e12b89e1820cafdd92b3e7526b8ba649eb7e6
unicast_rtp_request() could pass an uninitialized 'us' parameter to
ast_ouraddrfor(). If ast_ouraddrfor() returns an error then the 'us'
parameter may not get initialized. Thus when the code tries to save the
'us' parameter to the local address we could try to copy a ridiculous
sized memory buffer and segfault.
* Made pass an initialized 'us' parameter to ast_ouraddrfor() and abort
the UnicastRTP channel request if it fails.
ASTERISK-26672
Change-Id: I1ef7a7c09f4da4f15dcb6de660d2bcac5f2a95c0
In some situations TCP threads may become frozen. This creates the
possibility that Asterisk could segfault if they become unfrozen after
chan_sip has been dlclose'd. This reorders the unload_module process to
allow abort if threads do not exit within 5 seconds.
High level order as follows:
1) Unregister from the core to stop new requests.
2) Signal threads to stop
3) Clear config based tables (but do not free the table itself).
4) Verify that threads have shutdown, cancel unload if not.
5) Clean all remaining resources.
ASTERISK-26586
Change-Id: Ie23692041d838fbd35ece61868f4c640960ff882
RFC says SIP headers look like:
HCOLON = *( SP / HTAB ) ":" SWS
SWS = [LWS] ; sep whitespace
LWS = [*WSP CRLF] 1*WSP ; linear whitespace
WSP = SP / HTAB ; from rfc2234
chan_sip implemented this:
HCOLON = *( LOWCTL / SP ) ":" SWS
LOWCTL = %x00-1F ; CTL without DEL
This discrepancy meant that SIP proxies in front of Asterisk with
chan_sip could pass on unknown headers with \x00-\x1F in them, which
would be treated by Asterisk as a different (known) header. For
example, the "To\x01:" header would gladly be forwarded by some proxies
as irrelevant, but chan_sip would treat it as the relevant "To:" header.
Those relying on a SIP proxy to scrub certain headers could mistakenly
get unexpected and unvalidated data fed to Asterisk.
This change fixes so chan_sip only considers SP/HTAB as valid tokens
before the colon, making it agree on the headers with other speakers of
SIP.
ASTERISK-26433 #close
AST-2016-009
Change-Id: I78086fbc524ac733b8f7f78cb423c91075fd489b
The sending codec is switched to the receiving codec and then
is switched back to the best native codec on EVERY receiving RTP packets.
This is because after call of ast_channel_set_rawwriteformat there is call
of ast_set_write_format which calls set_format which sets rawwriteformat
to the best native format.
This patch adds a new function ast_set_write_format_path which set
specific write path on channel and uses this function to switch
the sending codec.
ASTERISK-26603 #close
Change-Id: I5b7d098f8b254ce8f45546e6c36e5d324737f71d
Per RFC 7118 5.2, the SIP URI 'transport' parameter should advertise
'ws' when WebSockets are to be used as the transport. This applies to
both secure and insecure WebSockets.
There were two bugs in Asterisk with respect to this:
(1) The most egregious occurs in res_pjsip. There, we advertise 'ws' for
insecure websockets and 'wss' for secure websockets. While this
would seem to make sense - since 'WS' and 'WSS' are used for the Via
Transport parameter - this is not the case for the SIP URI. This
patch corrects that by registering the secure websockets with
pjproject using the shorthand 'WS', and by returning 'ws' when asked
for the transport parameter. Note that in pjproject, it is perfectly
valid to have multiple transports use the same shorthand.
(2) In chan_sip, we return an upper-case version of the transport 'WS'
instead of 'ws'. Since we should be strict in what we send and
liberal in what we accept (within reason), this patch lower-cases
the transport before appending it to the parameter.
ASTERISK-24330 #close
Reported by: cervajs, Inaki Baz Castillo
Change-Id: Iff77b645f8cc3b7cd35168a6676c26b147f22f42
If a TCP/TLS connection was pending (not accepted and not timed out) during
unload of chan_sip, Asterisk would segfault when trying to send a signal to
a thread whose thread ID hadn't been recorded yet. This commit fixes that by
recording the thread ID before calling the blocking connect() syscall.
This was a regression introduced by 776a14386a.
The above wasn't enough to fix the segfault, which was now delayed to the
point where connect() timed out. Therefore, it was necessary to also remove
the SA_RESTART flag from the SIGURG sigaction so that pthread_kill() could be
used to interruput the connect() syscall.
This was a regression introduced by 5d313f51b9.
ASTERISK-26586 #close
Change-Id: I76fd9d47d56e4264e2629bce8ec15fecba673e7b
fopencookie/funclose is a non-standard API and should not be used
in portable software. Additionally, the way FILE's fd is used in
non-blocking mode is undefined behaviour and cannot be relied on.
This introduces internal abstraction for io streams, that allows
implementing the desired virtualization of read/write operations
with necessary timeout handling.
ASTERISK-24515 #close
ASTERISK-24517 #close
Change-Id: Id916aef418b665ced6a7489aef74908b6e376e85
Fix ASTERISK-26565 by adding ast_rtp_instance_stop before
rtp instance destroy for chan_unistim. Also several fixes
for displayed text translation.
Change-Id: If42a03eea09bd1633471406bdc829cf98bf6affc
Correct typo of end-pints to end-points
Re-wrap session timer parameter docs to max 80 chars wide; this
eases reading on terminals with lower resolution, commonly the case
for those with visual impairments.
ASTERISK-26573
Change-Id: I22c94459f4bb6b8a2f6713cfd22e87c32f204e6b
Signed-off-by: C.J. Collier <cjcollier@linuxfoundation.org>
This reverts commit 93332cb1d0.
Unfortunately, the aforementioned commit caused a regression (incoming calls
would eventually disconnect). Thus it is being removed.
ASTERISK-26523 #close
ASTERISK-25270
Change-Id: Ibf5586adc303073a8eac667a4cbfdb6be184a64d
If in sip.conf (general section) set option register_retry_403=no,
the command "sip show settings" return value:
Outbound reg. retry 403:0
If in sip.conf (general section) set option register_retry_403=yes,
the command "sip show settings" return value:
Outbound reg. retry 403:-1
* In static char "sip show settings" for "Outbound.reg. retry 403"
option use AST_CLI_YESNO
ASTERISK-26476 #close
Change-Id: I3c14272f05f1067bd2aeaa8b3ef9cf8fcb12dcf9
Support for referring to DAHDI channels by logical names was added in
(FIXME: when? Asterisk 11? 1.8?) and was intended to be part of support
of refering to channels by name.
While technically usable, it has never been properly supported in
dahdi-tools, as using it would require many changes at the Asterisk
level. Instead logical mapping was added at the kernel level.
Thus it seems that refering to DAHDI channels by name is not really used
by anyone, and therefore should probably be removed.
Change-Id: I7d50bbfd9d957586f5cd06570244ef87bd54b485
ASTERISK_REGISTER_FILE no longer has any purpose so this commit removes
all traces of it.
Previously exported symbols removed:
* __ast_register_file
* __ast_unregister_file
* ast_complete_source_filename
This also removes the mtx_prof static variable that was declared when
MTX_PROFILE was enabled. This variable was only used in lock.c so it
is now initialized in that file only.
ASTERISK-26480 #close
Change-Id: I1074af07d71f9e159c48ef36631aa432c86f9966
When channel format changes occurred as a result of an RTP
re-negotiation the bridge was not informed this had happened.
As a result the bridge technology was not re-evaluated and the
channel may have been in a bridge technology that was incompatible
with its formats. The bridge is now unbridged and the technology
re-evaluated when this occurs.
The chan_pjsip module also allowed asymmetric codecs for sending
and receiving. This did not work with all devices and caused one
way audio problems. The default has been changed to NOT do this
but to match the sending codec to the receiving codec. For users
who want asymmetric codecs an option has been added, asymmetric_rtp_codec,
which will return chan_pjsip to the previous behavior.
The codecs returned by the chan_pjsip module when queried by
the bridge_native_rtp module were also not reflective of the
actual negotiated codecs. The nativeformats are now returned as
they reflect the actual negotiated codecs.
ASTERISK-26423 #close
Change-Id: I6ec88c6e3912f52c334f1a26983ccb8f267020dc
On heavy loaded system the TCP/TLS incoming calls could be
disconnected by pjproject while these calls are being
processed by asterisk.
This patch uses functions pjsip_inv_add_ref/pjsip_inv_dec_ref
to inform pjproject that an INVITE session is in use.
ASTERISK-26482 #close
Change-Id: Ia2e3e2f75358cdb530252a9ce158af3d5d9fdf33
Previously, the settings videosupport=always and videosupport=yes behaved
identically and unconditionally caused a video offer to be sent in the SDP on
an outgoing call. This was a regression introduced with commit
5a1d90e1fb in Asterisk 1.6.1.
This commit restores correct behavior: videosupport=always causes a video offer
to be sent unconditionally, while videosupport=yes will only offer video on an
outbound channel if the incoming channel it is bridged to also supports video.
That way, the device receiving the outgoing call can display the correct user
interface elements for audio or video and will not unnecessarily show a blank
video window on an audio-only call.
ASTERISK-17470 #close
Change-Id: I782f4409d436114dbc97061c3570c0cd24f7c3ae
In the SIP channel driver chan_sip, auto_comedia was expected to be used in
tandem with auto_force_rport. Or stated differently: Only when auto_force_rport
was chosen (the default), auto_comedia worked. This change allows auto_comedia
to be set independently of the state of (auto_)force_rport. For example,
nat=force_rport,auto_comedia is useful for IPv4/IPv6 Dual Stack deployments
when IPv6 clients are behind a Firewall.
ASTERISK-26457 #close
Change-Id: Ib29d66c6dbb61648e371e01fc36c6978ddae5bc2
In the SIP channel driver chan_sip, the default is "auto_force_rport". When no
NAT was detected, for example in case of IPv6, Asterisk uses the IP address
from the headers within the SIP-REGISTER for subsequent SIP signaling. When
the remote party specifies support for Symmetric Response (RFC 3581) via the
parameter "rport", Asterisk should not extract the port from the SIP headers
but reuse the port of the transport. This did not happen because of a typo.
ASTERISK-26438 #close
Change-Id: If6e7891848aaf96666dee5305695f7c6667cd5a6
For the channel driver chan_sip, you specify externhost=example.com in sip.conf
when your Asterisk is behind a NAT and your IP address is assigned dynamically.
Or stated differently: You do not have a static IP address to use "externaddr"
directly. This NAT support is quite handy but just about IPv4. Previously,
Asterisk resolved "externhost" to any IP version. When the first DNS answer
resolved to an IPv6, Asterisk sent an IPv6 in SIP/SDP for origin (o=) and
connection (c=). This happened in outgoing SIP-REGISTER and while answering
SIP-INVITE. If the remote peer is IPv4-only, it might not handle o=/c= with an
IPv6. This change makes sure, no IPv6 is resolved anymore for "externhost".
ASTERISK-18232 #close
Reported by: Jacek Kowalski
Tested by: Alexander Traud
patches:
changes.patch submitted by Alessandro Crespi
Change-Id: If68eedbeff65bd1c1d8a9ed921c02ba464b32dac
Users upgrading from asterisk 13.5 to a later version and who use
realtime with peers that have mailboxes were experiencing runaway
situations that manifested as a continuous stream of taskprocessor
congestion errors, memory leaks and an unresponsive chan_sip.
A related issue was that setting rtcachefriends=no NEVER worked in
asterisk 13 (since the move to stasis). In 13.5 and earlier, when a
peer tried to register, all of the stasis threads would block and
chan_sip would again become unresponsive. After 13.5, the runaway
would happen.
There were a number of causes...
* mwi_event_cb was (indirectly) calling build_peer even though calls to
mwi_event_cb are often caused by build_peer.
* In an effort to prevent chan_sip from being unloaded while messages
were still in flight, destroy_mailboxes was calling
stasis_unsubscribe_and_join but in some cases waited forever for the
final message.
* add_peer_mailboxes wasn't properly marking the existing mailboxes
on a peer as "keep" so build_peer would always delete them all.
* add_peer_mwi_subs was unsubscribing existing mailbox subscriptions
then just creating them again.
All of this was causing a flood of subscribes and unsubscribes on
multiple threads all for the same peer and mailbox.
Fixes...
* add_peer_mailboxes now marks mailboxes correctly and build_peer only
deletes the ones that really are no longer needed by the peer.
* add_peer_mwi_subs now only adds subscriptions marked as "new" instead
of unsubscribing and resubscribing everything. It also adds the peer
object's address to the mailbox instead of its name to the subscription
userdata so mwi_event_cb doesn't have to call build_peer.
With these changes, with rtcachefriends=yes (the most common setting),
there are no leaks, locks, loops or crashes at shutdown.
rtcachefriends=no still causes leaks but at least it doesn't lock, loop
or crash. Since making rtcachefriends=no work wasnt in scope for this
issue, further work will have to be deferred to a separate patch.
Side fixes...
* The ast_lock_track structure had a member named "thread" which gdb
doesn't like since it conflicts with it's "thread" command. That
member was renamed to "thread_id".
ASTERISK-25468 #close
Change-Id: I07519ef7f092629e1e844f855abd279d6475cdd0
HANGUPCAUSE not return 'SIP 200 Ok' when dialed channel answered.
This patch change the call order of ast_queue_control_data
and ast_queue_control in chan_pjsip_incoming_response.
ASTERISK-26396 #close
Reported by: AaronAn
Tested by: AaronAn
Change-Id: Ide2d31723d8d425961e985de7de625694580be61
Change-Id I1cd33453c77c56c8e1394cd60a6f17bb61c1d957 Enable Session-Timers for
SIP over TCP (and TLS) also disables SIP retransmits in chan_sip for non-UDP
connections, allowing the TCP layer to handle the retransmits. Unfortunately,
this caused sessions to be terminated with a retransmit timeout becasue it
stopped at the point of the first retrans call.
This patch waits for the 64*T1 timer to expire instead.
ASTERISK-19968
Change-Id: I844f26801aada10bc94e9bebe6e151f0a8443204
Previously, the Contact was stored only on initial INVITE and on any
18X and 200. That meant that after re-INVITEs from *us* the Contact
could get updated, but after re-INVITEs from the *peer*, it did not.
This changeset fixes this inconsistency, properly allowing target
refreshes through re-INVITES (RFC3261, 12.2).
If your strictrtp setting allows it, this change allows you to switch
the source IP of a connected/calling device mid-call with a simple
re-INVITE from the new IP.
ASTERISK-26358 #close
Change-Id: Ibb8512054ab27c8c3d2514022568fde943bf2435
In some scenarios dialog_initialize_rtp can be called multiple times on
the same dialog. This can cause RTP instances to be leaked along with
multiple file descriptors for each instance.
This change makes it so the existing RTP instances are destroyed and
not overwritten, stopping the memory leak.
ASTERISK-26272 #close
patches:
ASTERISK-26272-13.patch submitted by Corey Farrell (license 5909)
Change-Id: Id529de1184c68f2f4d254ab41a1f458dafdb5f73
Following the Encrypt-all-the-things paradigm:
The user enters his SIP-URI and password. Thanks to DNS-NAPTR, the phone
determines SIP-over-TLS as preferred transport. In SIP/SDP, the phone starts
the call with a crypto attribute, but not as RTP/sAVP but the RTP/AVP profile
(sRTP is preferred aka optional; not mandatory). If the VoIP server does not
support sRTP and TLS, the phone shows an open padlock icon.
This paradigm is supported by several VoIP/SIP clients on default. Some
implementations even cannot be changed to RTP/sAVP. Therefore here, this
change allows Preferred sRTP for ingress. For egress, please, create a dial
plan which starts with RTP/SAVP, and when rejected tries again with RTP/AVP.
ASTERISK-20234 #close
Reported by: tootai
Tested by: tootai, Alexander Traud
patches:
srtp_patches.diff submitted by Matt Jordan
Change-Id: I42cb779df3a9c7b3dd03a629fb3a296aa4ceb0fd
Certain SNOM phones send so-called "optional crypto" in their SDP body.
Regular SRTP setup looks like this:
m=audio 64620 RTP/SAVP 8 0 9 99 3 18 4 101
a=crypto:1 AES_CM_128_HMAC_SHA1_32 inline:...
SNOM-style "optional crypto" looks like this:
m=audio 61438 RTP/AVP 8 0 9 99 3 18 4 101
a=crypto:1 AES_CM_128_HMAC_SHA1_32 inline:...
A crypto line is supplied, but the m-line does not have SAVP.
When res_srtp.so is *not* loaded, then chan_sip.so treats the optional
crypto as regular RTP, but when res_srtp.so *is* loaded, it refuses the
incoming call with the following message:
WARNING: process_sdp: Failed to receive SDP offer/answer with
required SRTP crypto attributes for audio
For platforms that want to start providing SRTP this presents a
compatibility problem.
This changeset lets chan_sip handle the SDP as if no crypto-line was
supplied: i.e. accept the call as regular RTP, just like it did before
res_srtp was loaded.
Now you'll get this informative warning instead:
WARNING: Ignoring crypto attribute in SDP because RTP transport is
insecure
ASTERISK-23989 #close
Reported by: Olle Johansson
Change-Id: I91a15ae05a0296e398d6b65f53bb11afde1d80e2
Starting from draft 2 of RFC 5456 (October 23, 2006) plaintext auth
is not supported in IAX2 protocol. Please refer to section 8.6.13 of
RFC 5456.
But plaintext auth is still supported by Asterisk implementation of IAX2.
This support should be dropped.
Patch, based on asterisk-dev discussion, adds deprecation warning on
startup if 'auth' is set to 'plaintext', changes default values of
'auth' from 'md5, plaintext' to 'md5'.
Patch is safe in terms of backwards compatibility, will work even if
remote peers have auth=plaintext and we have defaults.
auth=plaintext setting will remain deprecated in Asterisk 14 and 15,
and IAX2 plaintext support will be removed in Asterisk 16.
ASTERISK-22820 #close
Change-Id: I5d2f3830cb57645604818f87518916e8a5c317bf
Historically, Asterisk has always specified annexb=no for the g729 format.
However, when using res_pjsip no format attribute was specified. This patch
makes it so the SDP now contains a format attribute line with annexb=no.
Note, that this means only g729a is negotiated. Even for pass through support.
According to rfc7261 the type of annex used (a or b) is dependent upon the
answerer. However, Asterisk being a back to back user agent makes this tricky
to support at this time, thus we only allow annex 'a' for now.
ASTERISK-26228 #close
patches:
res_format_attr_g729.c submitted by Jason Parker (license 4993)
Change-Id: I76bc20cc0a01af01536e9915afef319c269c22d0
This updates func_channel.c and main/message.c to use a generic xpointer
include instead of including info from each channel driver. Now the
name attribute of info is CHANNEL or CHANNEL_EXAMPLES to be included in
documentation for func_channel. Setting the name attribute of info to
MessageToInfo or MessageFromInfo causes it to be included in the
MessageSend application and AMI action.
Change-Id: I89fd8276a3250824241a618009714267d3a8d1ea
Packets are read regulary, when there is no data in buffer fr->frametype
is AST_FRAME_NULL. There was no check of frametype and lastrtprx always
updated and, therefore, rtptimeout did not work at all.
ASTERISK-25270 #close
Change-Id: If3b5ca0dbb822582a86eb7d01dcae4e83448c41d
* Following the example of the PJSIP channel driver, the channel
technology specific documentation has been moved to the respective
channel drivers that provide that functionality. This has the benefit
of locating the documentation of items with those modules that provide
it.
* Examples of using the CHANNEL function for both standard items as well
as for PJSIP have been added.
* The 'max_forwards' standard item has been documented.
Change-Id: Ifaa79a232c8ac99cf8da6ef6cc7815d398b1b79b
This patch adds a new PJSIP specific dialplan function,
PJSIP_SEND_SESSION_REFRESH. When invoked on a PJSIP channel, the media
session will be refreshed via either an UPDATE or re-INVITE request.
When used in conjunction with the PJSIP_MEDIA_OFFER dialplan function,
the formats in use on a PJSIP channel can be re-negotiated and changed
dynamically after call setup.
ASTERISK-26277 #close
Change-Id: Ib98fe09ba889aafe26d58d32f0fd1323f8fd9b1b
(cherry picked from commit eec60dd773)
Asterisk defaults to timers=accept/refresher=uas. In that scenario, only in that
scenario, Sessions-Timers (RFC 4028) had no effect via TCP. This change enables
Session-Timers for SIP over TCP (and for SIP over TLS).
However with longer international calls via TCP, the SIP channel might break,
because all hops on the Internet route must stay online (have not a single power
outage, for example). Therefore with Session-Timers enabled (which are enabled
at default), you might see dropped calls. Consequently even with this change,
you might be better-off going for session-timers=refuse in your sip.conf.
ASTERISK-19968 #close
Change-Id: I1cd33453c77c56c8e1394cd60a6f17bb61c1d957
sip_show_channels locks the dialogs container first then locks each
sip_pvt so it can spit out the details. The rest of sip dialog
processing locks the sip_pvt first then locks the dialogs container
if it needs to. Both lock in the order they need but deadlocks can
result. To fix, sip_show_channels and sip_show_channelstats have
been converted to use an iterator rather than ao2_callback. This way
the container is locked only while getting the next entry and is
unlocked when the callback is called.
ASTERISK-23013 #close
Change-Id: Id9980419909e811f89484950ed46ef117b9eb990
The dahdi_handle_dtmf() and my_handle_dtmf() have the potential to
deadlock if an incoming fax happens during the Playback or similar
application.
* Fixed the potential deadlock by not calling ast_async_goto() with the
channel lock held.
ASTERISK-26216 #close
Reported by: Richard Mudgett
Change-Id: I9144b84ade5f96690996624ec8a2d40c56af40aa
The sip_read() has the potential to deadlock if an incoming fax happens
during the Playback or similar application.
* Fixed the potential deadlock by not calling ast_async_goto() with the
channel lock held.
* Made always eat the fax detection frame whether there is a fax extension
or not.
ASTERISK-26216
Reported by: Richard Mudgett
Change-Id: I6d3f5cccd4b77c3aa6ffc1a54c0f6bde61c9278e
The chan_pjsip_cng_tone_detected() has the potential to deadlock if an
incoming fax happens during the Playback or similar application.
* Fixed the potential deadlock by not calling ast_async_goto() with the
channel lock held.
* Made always eat the fax detection frame whether there is a fax extension
or not.
ASTERISK-26216
Reported by: Richard Mudgett
Change-Id: I32aecbb4818af646dc5a619f0dc040e9b1f222e5
The new option allows the channel driver's faxdetect option to timeout on
a call after the specified number of seconds into a call. The new feature
is disabled if the timeout is set to zero. The option is disabled by
default.
* Don't clear dsp_features after passing them to the dsp code in
my_pri_ss7_open_media(). We should still remember them especially for the
new faxdetect_timeout option.
ASTERISK-26214
Reported by: Richard Mudgett
Change-Id: Ieffd3fe788788d56282844774365546dce8ac810
The new endpoint option allows the PJSIP channel driver's fax_detect
endpoint option to timeout on a call after the specified number of
seconds into a call. The new feature is disabled if the timeout is set
to zero. The option is disabled by default.
ASTERISK-26214
Reported by: Richard Mudgett
Change-Id: Id5a87375fb2c4f9dc1d4b44c78ec8735ba65453d
If AST_TEST_DEFINE is not conditional to TEST_FRAMEWORK it produces dead
code. This places all existing unit tests into a conditional block if
they weren't already.
ASTERISK-26211 #close
Change-Id: I8ef83ee11cbc991b07b7a37ecb41433e8c734686
Cleanup the peer reference when stasis_subscription_final_message is
true. Also free peer_name even if peer exists, after reload a new
peer_name will be allocated.
ASTERISK-26193 #close
Change-Id: If7ecd52facdc5c227f701c760841e3f6ca53cc69
* get_sip_pvt_from_replaces leaks sip_pvt_ptr on any error.
* build_peer leaks peer on failure to allocate the endpoint.
This patch fixes get_sip_pvt by using an RAII_VAR, build_peer is fixed
with an unref in the appropriate place.
ASTERISK-26184 #close
Change-Id: I728b424648ad041409f7d90880f4c28b3ce2ca12
Some T.38 implementations may send another re-invite after the initial
one which adds additional negotiation details (such as the max bitrate).
Currently this will fail when passthrough is being done in chan_sip as we
do nothing if T.38 is already active.
Other handlers of T.38 inside of Asterisk (such as res_fax) handle this
scenario so this change adds support for it to chan_sip and res_pjsip_t38.
If a request to negotiate is received while T.38 is already enabled a
new re-INVITE is sent and negotiation is done again.
ASTERISK-26179 #close
Change-Id: I0298494d3da6df3219bbfa4be9aa04015043145c
pjsip_inv_end_session() is documented as being able to return the
passed in tdata parameter set to NULL on success.
Change-Id: I09d53725c49b7183c41bfa1be3ff225f3a8d3047
gcc 6.1.1 caught a few more issues.
Made sure the unit tests still pass for the func_env and stdtime
issues.
ASTERISK-26157 #close
Change-Id: I6664d8f34a45bc1481d2a854481c7878b0c1cf8e
This change removes hardcoded SDP parsing and generation for
Siren7 and Siren14 from chan_sip and moves it to format attribute
modules so it can also be used by chan_pjsip.
With this the fmtp lines for both are added with the bitrate
information.
ASTERISK-26021
Change-Id: Ibb004eda37a14c0a35ef0613f6237977fc800037
A code block only enabled when HAVE_PKTINFO is not defined (FreeBSD)
was using a pointer to a pointer as the destination of a memcpy and a
'&' instead of '*' in the sizeof.
ASTERISK-26138 #close
Change-Id: Id4927ff256c0e470bdf7bcfc025146a2f656e708
bridge_native_rtp can call into an RTP-capable channel driver in order
for the driver to update information about who the channel is
communicating with. For SIP channel drivers, this means deactivating
RTCP and sending a reinvite so that the endpoints can communicate
directly.
bridge_native_rtp does the right thing and has the channel locked when
calling into the channel driver. chan_pjsip can't alter session
properties in this thread, though. chan_pjsip queues a task on the
session serializer in order to update properties there.
The problem is that this queued task was not locking the channel. This
meant that the queued task could attempt to deactivate RTCP at the same
time that the channel thread was attempting to process an incoming RTCP
packet. This could lead to a crash.
This patch fixes the issue by locking the channel in the queued task
when altering RTP properties.
ASTERISK-26092 #close
Reported by Niklas Larsson
Change-Id: I3464e226a3c41f6b915f97891e07fa1599e2a159
A change to glibc 2.22 changed the order of the sockadddr_storage
members which caused the places where we do an initialization of
ast_sockaddr with '{ { 0, 0, } }' to fail compilation. Those
initializers (which we shouldn't have been using anyway) have been
replaced with memsets.
Change-Id: Idd1b3b320903d8771bfe221f0b015685de628fa4
POSIX defines signal.h. sys/signal.h should not be used as it is
c-library internal header which may or may not exist. Notably with
musl it generates warning of being incorrect.
Change-Id: Ia56b0aa1d84b5c590114867b1b384a624f39a6fc
This saves around 100 bytes when G.711, G.722, G.729, and GSM are advertised in
SDP. This reduces the chance to hit the MTU bearer of 1300 bytes for SIP over
UDP, if many codecs are allowed in Asterisk. This new feature is enabled
together with the optional feature compactheaders=yes via the file sip.conf.
ASTERISK-25578 #close
Change-Id: I16491b1937862de26f84fa0ffe679a6bab925044
Currently chan_sip can give weird messages if the contacts don't
fit in the From: or To: headers. This fix changes the from,to and
invite variables to use ast_str, allocates and deallocates them and
resizes them if needed.
ASTERISK-26069 #close
Change-Id: I1b68fcbddca6f6cc7d7a92fe1cb0d5430282b2b3
Change the awkward and not as flexible UnicastRTP options format
From:
Dial(UnicastRTP/127.0.0.1[/[<engine>][/[<codec>]]])
To:
Dial(UnicastRTP/127.0.0.1[/[<options>]])
Where <options> can be standard Asterisk flag options:
c(<codec>) - Specify which codec/format to use such as 'ulaw'.
e(<engine>) - Specify which RTP engine to use such as 'asterisk'.
More option flags can be easily added later such as the codec's RTP
payload type to use when the codec does not have a static payload type
defined.
Change-Id: I0c297aaf09e2ee515536cb7437bb8042ff8ff3c9
This adds a new parameter to the end of a multicast RTP dialing string.
This parameter defines the following options:
* i: Set the interface from which multicast RTP is sent
* l: Set whether multicast packets are looped back to the sender
* t: Set the TTL for multicast packets
* c: Set the codec to use for RTP
ASTERISK-26068 #close
Reported by Mark Michelson
Change-Id: I033b706b533f0aa635c342eb738e0bcefa07e219
* Fixed NULL crash potential if parameters are missing.
* Reordered some operations so further diagnostic messages can be
more helpful.
Change-Id: Ibbdc67a2496508cbfbfef0cf19c35177ae2fbd70
When chan_sip does a re-INVITE to refresh a session and authentication
is required, the INVITE with the Authorization header containes a
second Session-Expires header without the ";refersher=" parameter.
This is causing some proxies to return a 400. Also, when Asterisk is
the uas and the refresher, it is including the Session-Expires and
Min-SE headers in OPTIONS messages which is not allowed per RFC4028.
This patch (based on the reporter's) Checks to see if a Session-Expires
header is already in the message before adding another one. It also
checks that the method is INVITE or UPDATE.
ASTERISK-26030 #close
Change-Id: I58a7b07bab5a3177748d8a7034fb8ad8e11ce1d9
The unload process currently tells each TCP/TLS to terminate but
does not wait for them to do so. This introduces a race condition
where the container holding the threads may be destroyed before
the threads are able to remove themselves from it. When they
finally do the container is invalid and can't be used causing a
crash.
A previous change existed which waited a bit to wait for any
stranglers to finish. This change extends this and waits longer.
ASTERISK-25961 #close
Change-Id: Idc6262b670ca49ede32061159e323b7b63c6f3c6
Since Stasis has been introduced, an attempt to send AMI messages by an
autocreated peer caused a crash, and all events from autocreated peers were
semi-inadvertently disabled altogether in 0b83761. This change restores the
disabled functionality.
ASTERISK-25950
Change-Id: Iecc350f23db603fadb2f302064643ebe9664e974
This eliminates some casts that I made a note saying v10 and above
would no longer need them.
Better late than never :)
Change-Id: I346cdb3032b6478ceb40eb6fe732978b54035572
Added the ability to show channel statistics to chan_pjsip (cli_functions.c)
Moved the existing 'pjsip show channel(s)' functionality from
pjsip_configuration to cli_functions.c. The stats needed chan_pjsip's
private header so it made sense to move the existing channel commands as well.
Now using stasis_cache_dump to get the channel snapshots rather than retrieving
all endpoints, then getting each one's channel snapshots. Much more efficient.
Change-Id: I03b114522126d27434030b285bf6d531ddd79869
Asterisk 13.7.0 included a fix for ASTERISK-24543, not to send all those
codecs, which the caller did not request/support. That fix was not complete
because on the second Session Timer all codecs were sent again. Some VoIP/SIP
clients interpreted that complete codec-list as a change in the SIP session.
Because of that, Asterisk did not send the RTP audio via NAT anymore which
created a non-audio scenario after the second Session Timer fired.
ASTERISK-24543 #close
Change-Id: I1881827816ab7fd47eb4287a95961179b34a0b66
check_via() already skips leading blanks where the sent-by address (with the
optional port) should be placed.
Since RFC 3261 allows for blanks between the port ant the Via parameters:
> https://tools.ietf.org/html/rfc3261#section-20.42
(actually it allows a lot of blanks more ;-)). I just switched from
ast_skip_blanks() to ast_strip() on the local copy of the string.
ASTERISK-21301 #close
Change-Id: Ie5b8fe5a07067b7c0dc9bcdd1707e99b23b02b06
During a transfer involving direct media a race occurs between when the
transferer channel is swapped out, initiating rtp changes/updates, and the
subsequent reinvites.
When Alice, after speaking with Charlie (Bob is on hold), connects Bob and
Charlie invites are sent to each in order to establish the call between them.
Bob is taken off hold and Charlie is told to have his media flow through
Asterisk. However, if before those invites go out the bridge updates Bob's
and/or Charlie's rtp information with direct media data (i.e. address, port)
then the invite(s) will contain the remote data in the SDP instead of the
Asterisk data.
The race occurs in the native bridge glue code when updating the peer. The
direct_media_address can get set twice before sending out the first invite
during call connection. This can happen because the checking/setting of the
direct_media_address happened in one thread while the sending of the invite(s)
happened in another thread.
This fix removes the race condition by moving the checking/setting of the
direct_media_address to be in the same thread as the sending of the invites(s).
This serializes the checking/setting and sending so they can no longer happen
out of order.
ASTERISK-25849 #close
Change-Id: Idfea590175e74f401929a601dba0c91ca1a7f873
This patch is part of a series to resolve deadlocks in chan_sip.c.
Stopping a scheduled event can result in a deadlock if the scheduled event
is running when you try to stop the event. If you hold a lock needed by
the scheduled event while trying to stop the scheduled event then a
deadlock can happen. The general strategy for resolving the deadlock
potential is to push the actual starting and stopping of the scheduled
events off onto the scheduler/do_monitor() thread by scheduling an
immediate one shot scheduled event. Some restructuring may be needed
because the code may assume that the start/stop of the scheduled events is
immediate.
ASTERISK-25023 #close
Change-Id: I96d429c57a48861fd8bde63dd93db4e92dc3adb6
This patch is part of a series to resolve deadlocks in chan_sip.c.
Stopping a scheduled event can result in a deadlock if the scheduled event
is running when you try to stop the event. If you hold a lock needed by
the scheduled event while trying to stop the scheduled event then a
deadlock can happen. The general strategy for resolving the deadlock
potential is to push the actual starting and stopping of the scheduled
events off onto the scheduler/do_monitor() thread by scheduling an
immediate one shot scheduled event. Some restructuring may be needed
because the code may assume that the start/stop of the scheduled events is
immediate.
ASTERISK-25023
Change-Id: I2e40de89efc8ae6e8850771d089ca44bc604b508
This patch is part of a series to resolve deadlocks in chan_sip.c.
Stopping a scheduled event can result in a deadlock if the scheduled event
is running when you try to stop the event. If you hold a lock needed by
the scheduled event while trying to stop the scheduled event then a
deadlock can happen. The general strategy for resolving the deadlock
potential is to push the actual starting and stopping of the scheduled
events off onto the scheduler/do_monitor() thread by scheduling an
immediate one shot scheduled event. Some restructuring may be needed
because the code may assume that the start/stop of the scheduled events is
immediate.
* Made always run check_pendings() under the scheduler thread so scheduler
ids can be checked safely.
ASTERISK-25023
Change-Id: Ia834d6edd5bdb47c163e4ecf884428a4a8b17d52
This patch is part of a series to resolve deadlocks in chan_sip.c.
Stopping a scheduled event can result in a deadlock if the scheduled event
is running when you try to stop the event. If you hold a lock needed by
the scheduled event while trying to stop the scheduled event then a
deadlock can happen. The general strategy for resolving the deadlock
potential is to push the actual starting and stopping of the scheduled
events off onto the scheduler/do_monitor() thread by scheduling an
immediate one shot scheduled event. Some restructuring may be needed
because the code may assume that the start/stop of the scheduled events is
immediate.
ASTERISK-25023
Change-Id: If595e4456cd059d7171880c7f354e844c21b5f5f
This patch is part of a series to resolve deadlocks in chan_sip.c.
Stopping a scheduled event can result in a deadlock if the scheduled event
is running when you try to stop the event. If you hold a lock needed by
the scheduled event while trying to stop the scheduled event then a
deadlock can happen. The general strategy for resolving the deadlock
potential is to push the actual starting and stopping of the scheduled
events off onto the scheduler/do_monitor() thread by scheduling an
immediate one shot scheduled event. Some restructuring may be needed
because the code may assume that the start/stop of the scheduled events is
immediate.
ASTERISK-25023
Change-Id: I6d65269151ba95e0d8fe4e9e611881cde2ab4900
This patch is part of a series to resolve deadlocks in chan_sip.c.
Stopping a scheduled event can result in a deadlock if the scheduled event
is running when you try to stop the event. If you hold a lock needed by
the scheduled event while trying to stop the scheduled event then a
deadlock can happen. The general strategy for resolving the deadlock
potential is to push the actual starting and stopping of the scheduled
events off onto the scheduler/do_monitor() thread by scheduling an
immediate one shot scheduled event. Some restructuring may be needed
because the code may assume that the start/stop of the scheduled events is
immediate.
ASTERISK-25023
Change-Id: I9c11b9d597468f63916c99e1dabff9f4a46f84c1
This patch is part of a series to resolve deadlocks in chan_sip.c.
Stopping a scheduled event can result in a deadlock if the scheduled event
is running when you try to stop the event. If you hold a lock needed by
the scheduled event while trying to stop the scheduled event then a
deadlock can happen. The general strategy for resolving the deadlock
potential is to push the actual starting and stopping of the scheduled
events off onto the scheduler/do_monitor() thread by scheduling an
immediate one shot scheduled event. Some restructuring may be needed
because the code may assume that the start/stop of the scheduled events is
immediate.
* Fix clearing autokillid in __sip_autodestruct() even though we could
reschedule.
ASTERISK-25023
Change-Id: I450580dbf26e2e3952ee6628c735b001565c368f
This patch is part of a series to resolve deadlocks in chan_sip.c.
Stopping a scheduled event can result in a deadlock if the scheduled event
is running when you try to stop the event. If you hold a lock needed by
the scheduled event while trying to stop the scheduled event then a
deadlock can happen. The general strategy for resolving the deadlock
potential is to push the actual starting and stopping of the scheduled
events off onto the scheduler/do_monitor() thread by scheduling an
immediate one shot scheduled event. Some restructuring may be needed
because the code may assume that the start/stop of the scheduled events is
immediate.
* Fix retrans_pkt() to call check_pendings() with both the owner channel
and the private objects locked as required.
* Refactor dialog retransmission packet list to safely remove packet
nodes. The list nodes are now ao2 objects. The list has a ref and the
scheduled entry has a ref.
ASTERISK-25023
Change-Id: I50926d81be53f4cd3d572a3292cd25f563f59641
This patch is part of a series to resolve deadlocks in chan_sip.c.
Stopping a scheduled event can result in a deadlock if the scheduled event
is running when you try to stop the event. If you hold a lock needed by
the scheduled event while trying to stop the scheduled event then a
deadlock can happen. The general strategy for resolving the deadlock
potential is to push the actual starting and stopping of the scheduled
events off onto the scheduler/do_monitor() thread by scheduling an
immediate one shot scheduled event. Some restructuring may be needed
because the code may assume that the start/stop of the scheduled events is
immediate.
ASTERISK-25023
Change-Id: I98a694fd42bc81436c83aa92de03226e6e4e3f48
This patch is part of a series to resolve deadlocks in chan_sip.c.
* Make dialog_unlink_all() unschedule all items at once in the sched
thread.
ASTERISK-25023
Change-Id: I7743072fb228836e8228b72f6dc46c8cc50b3fb4
This patch is part of a series to resolve deadlocks in chan_sip.c.
The reordering of chan_sip's shutdown is to handle any immediate events
that get put onto the scheduler so resources aren't leaked. The typical
immediate events at this time are going to be concerned with stopping
other scheduled events.
ASTERISK-25023
Change-Id: I3f6540717634f6f2e84d8531a054976f2bbb9d20
This patch is part of a series to resolve deadlocks in chan_sip.c.
Delaying destruction of the chan_sip sip_pvt structures caused the
/channels/chan_sip/test_sip_rtpqos unit test to crash. That test
registers a special test ast_rtp_engine with the rtp engine module. When
the unit test completes it cleans up by unregistering the test
ast_rtp_engine and exits. Since the delayed destruction of the sip_pvt
happens after the unit test returns, the destructor tries to call the rtp
engine destroy callback of the test ast_rtp_engine auto variable which no
longer exists on the stack.
* Change the test ast_rtp_engine auto variable to a static variable. Now
the variable can still exist after the unit test exits so the delayed
sip_pvt destruction can complete successfully.
ASTERISK-25023
Change-Id: I61e34a12d425189ef7e96fc69ae14993f82f3f13
Remove destructor calling destroy_it calling really_destroy_it
for no benefit. Just make the destructor the really_destroy_it
function.
Change-Id: Idea0d47b27dd74f2488db75bcc7f353d8fdc614a
Previous chan_sip behavior:
Before this patch chan_sip would always strip any quotes from an incoming
reason and pass that value up as the REDIRECTING(reason). For an outgoing
reason value, chan_sip would check the value against known values and
quote any it didn't recognize. Incoming 480 response message reason text
was just assigned to the REDIRECTING(reason).
Previous chan_pjsip behavior:
Before this patch chan_pjsip would always pass the incoming reason value
up as the REDIRECTING(reason). For an outgoing reason value, chan_pjsip
would send the reason value as passed down.
With this patch:
Both channel drivers match incoming reason values with values documented
by REDIRECTING(reason) and values documented by RFC5806 regardless of
whether they are quoted or not. RFC5806 values are mapped to the
equivalent REDIRECTING(reason) documented value and is set in
REDIRECTING(reason). e.g., an incoming RFC5806 'unconditional' value or a
quoted string version ('"unconditional"') is converted to
REDIRECTING(reason)'s 'cfu' value. The user's dialplan only needs to deal
with 'cfu' instead of any of the aliases.
The incoming 480 response reason text supported by chan_sip checks for
known reason values and if not matched then puts quotes around the reason
string and assigns that to REDIRECTING(reason).
Both channel drivers send outgoing known REDIRECTING(reason) values as the
unquoted RFC5806 equivalent. User custom values are either sent as is or
with added quotes if SIP doesn't allow a character within the value as
part of a RFC3261 Section 25.1 token. Note that there are still
limitations on what characters can be put in a custom user value. e.g.,
embedding quotes in the middle of the reason string is silly and just
going to cause you grief.
* Setting a REDIRECTING(reason) value now recognizes RFC5806 aliases.
e.g., Setting REDIRECTING(reason) to 'unconditional' is converted to the
'cfu' value.
* Added missing malloc() NULL return check in res_pjsip_diversion.c
set_redirecting_reason().
* Fixed potential read from a stale pointer in res_pjsip_diversion.c
add_diversion_header(). The reason string needed to be copied into the
tdata memory pool to ensure that the string would always be available.
Otherwise, if the reason string returned by reason_code_to_str() was a
user's reason string then the string could be freed later by another
thread.
Change-Id: Ifba83d23a195a9f64d55b9c681d2e62476b68a87
chan_sip could not handle AST_T38_TERMINATED frames being sent to it when
the channel left the bridge. The action resulted in overlapping outgoing
reINVITEs. The testsuite tests/fax/sip/directmedia_reinvite_t38 was not
happy.
* Force T.38 to be remembered as locally bridged. Now when the channel
leaves the native RTP bridge after T.38, the channel remembers that it has
already reINVITEed the media back to Asterisk. It just needs to terminate
T.38 when the AST_T38_TERMINATED arrives.
* Prevent redundant AST_T38_TERMINATED from causing problems. Redundant
AST_T38_TERMINATED frames could cause overlapping outgoing reINVITEs if
they happen before the T.38 state changes to disabled. Now the T.38 state
is set to disabled before the reINVITE is sent.
ASTERISK-25582 #close
Change-Id: I53f5c6ce7d90b3f322a942af1a9bcab6d967b7ce
Use the correct comparison function since we only care if the address
without the port is the same.
Change-Id: Ibf6c485f843a1be6dee58a47b33d81a7a8cbe3b0
Previously you could add [!dnid] to the SIP dial string to alter the To:
header. This change allows you to alter the From header as well.
SIP dial string extra options now look like this:
[![touser[@todomain]][![fromuser][@fromdomain]]]
INCOMPATIBLE CHANGE: If you were using an exclamation mark in your To:
header, that is no longer possible.
ASTERISK-25803 #close
Change-Id: I2457e9ba7a89eb1da22084bab5a4d4328e189db7
Setting the sip.conf timert1 value to a value higher than 1245 can cause
an integer overflow and result in large retransmit timeout times. These
large timeout times hold system file descriptors hostage and can cause the
system to run out of file descriptors.
NOTE: The default sip.conf timert1 value is 500 which does not expose the
vulnerability.
* The overflow is now detected and the previous timeout time is
calculated.
ASTERISK-25397 #close
Reported by: Alexander Traud
Change-Id: Ia7231f2f415af1cbf90b923e001b9219cff46290
When I ask asterisk to send a SIP NOTIFY message to a sip peer using either a)
AMI action: SIPnotify or b) cli command: sip notify <cmd> <peer>, I expect
asterisk to include the same value for its own ip in both cases a) and b),
but it seems a) produces a contact header like Contact:
<sip:asterisk@192.168.1.227:8060> whereas b) produces a contact header like
<sip:asterisk@127.0.0.1:8060>. 0.0.0.0:8060 is my udpbindaddr in sip.conf
My guess is that manager_sipnotify should call
ast_sip_ouraddrfor(&p->sa, &p->ourip, p) the same way sip_cli_notify does,
because after applying this patch, both cases a) and b) produce
the contact header that I expect: <sip:asterisk@192.168.1.227:8060>
Reported by: Stefan Engström
Tested by: Stefan Engström
Change-Id: I86af5e209db64aab82c25417de6c768fb645f476
sip_sipredirect uses sscanf to copy up to 256 characters to a stacked buffer
of 256 characters. This patch reduces the copy to 255 characters to leave
room for the string null terminator.
ASTERISK-25722 #close
Change-Id: Id6c3a629a609e94153287512c59aa1923e8a03ab
In the sample sip.conf this is written with regard to notifyringing:
;notifyringing = no ; Control whether subscriptions already INUSE get sent
RINGING when another call is sent (default: yes)
However, this setting changes whether or not any RINGING indications are sent
to subscriptions. There is no separate configurable setting that allows
to control whether INUSE subscriptions also get sent RINGING. This is however
a useful option, to see (using BLF) if somebody else is able to handle an
incoming call or if everybody is busy.
This patch corrects the documentation for notifyringing (so the documentation
matches the functionality) and make notifyringing a tri-state option, by adding
the value 'notinuse' (in addition to 'yes' and 'no'). When notifyringing =
notinuse, only subscriptions that are not INUSE are sent the RINGING signal.
The default setting for notifyringing remains set to yes, so the default
behaviour is not affected.
ASTERISK-25558
Change-Id: I88f7036ee084bb3f43b74f15612695c6708f74aa
websocket_write_timeout was not being set to its default value
during sip config reload, which meant that prior to this commit,
1) the default value of 100 was not used, unless an invalid value
(or 1) was specified in sip.conf for websocket_write_timeout, and
2) if the websocket_write_timeout directive was removed from sip.conf
without a full restart of asterisk, then the previous value would
continue to be used indefinitely.
This essentially lead to a 0ms write timeout (the first write attempt
in ast_careful_fwrite must have succeeded) in websocket write requests
from chan_sip, unless websocket_write_timeout was explicitely set in sip.conf.
Changes to websocket_write_timeout still only apply to new websocket
sessions, after the sip reload -- timeouts on existing sessions are
not adjusted during sip reload.
Change-Id: Ibed3816ed29cc354af6564c5ab3e75eab72cb953
Per the documentation the WebSocket support in chan_sip is
supposed to be enabled by default but is not. This change
corrects that.
Change-Id: Icb02bbcad47b11a795c14ce20a9bf29649a54423
Adds the TCP Keep Alive option to TCP and TLS server sockets. Previously
this option was only being set on session sockets.
http://www.tldp.org/HOWTO/html_single/TCP-Keepalive-HOWTO/
According to the link above, the SO_KEEPALIVE option is useful for knowing
when a TCP connected endpoint has severed communication without indicating
it or has become unreachable for some reason. Without this patch, keep
alive is not set on the socket listening for incoming TCP sessions and
in Komatsu's report this resulted in the thread listening for TCP becoming
stuck in a waiting state.
ASTERISK-25364 #close
Reported by: Hiroaki Komatsu
Change-Id: I7ed7bcfa982b367dc64b4b73fbd962da49b9af36
The current logic for ICE negotiation starts it
when receiving an SDP with ICE candidates. This is
incorrect as ICE negotiation can only start when each
call party have at least one pair of local and remote
candidate. Starting ICE negotiation early would result
in negotiation failure and ultimately no audio.
This change makes it so ICE negotiation is only started
when a response with SDP is received or when a response
with SDP is sent.
ASTERISK-24146
Change-Id: I55a632bde9e9827871b09141d82747e08379a8ca
Asterisk may crash when calling ast_channel_get_t38_state(c)
on a locked channel which is being hung up.
ASTERISK-25609 #close
Change-Id: Ifaa707c04b865a290ffab719bd2e5c48ff667c7b
A crash happens sometimes when performing a CLI "sip reload". The bogus
peer gets refreshed while it is in use by a new call which can cause the
crash.
* Protected the global bogus peer object with an ao2 global object
container.
ASTERISK-25610 #close
Change-Id: I5b528c742195681abcf713c6e1011ea65354eeed
Current support for reason header did work only in SIP responses.
According to RFC3336 the reason header might appear in any SIP request.
But it seems to make most sence in BYE and CANCEL so parasing is done
there too (if use_q850_reason=yes).
Change-Id: Ib6be7b34c23a76d0e98dfd0816c89931000ac790
chan_sip.c:
* Initialize mwi subscription scheduler ids earlier because of ASTOBJ to
ao2 conversion.
* Initialize register scheduler ids earlier because of ASTOBJ to ao2
conversion.
chan_skinny.c:
* Fix more scheduler usage for the valid 0 id value.
ASTERISK-25476
Change-Id: If9f0e5d99638b2f9d102d1ebc9c5a14b2d706e95
channels/chan_iax2.c:
* Initialize struct chan_iax2_pvt scheduler ids earlier because of
iax2_destroy_helper().
channels/chan_sip.c:
channels/sip/config_parser.c:
* Fix initialization of scheduler id struct members. Some off nominal
paths had 0 as a scheduler id to be destroyed when it was never started.
chan_skinny.c:
* Fix some scheduler id comparisons that excluded the valid 0 id.
channel.c:
* Fix channel initialization of the video stream scheduler id.
pbx_dundi.c:
* Fix channel initialization of the packet retransmission scheduler id.
ASTERISK-25476
Change-Id: I07a3449f728f671d326a22fcbd071f150ba2e8c8
When a channel is in a direct media bridge, a re-INVITE may arrive that forces
Asterisk to re-negotiate the media to a T.38 fax. When this occurs, the bridge
must change its technology to a simple bridge, and re-INVITE the media back
to Asterisk.
Generally, this logic mostly already exists in Asterisk. However, prior to this
patch, there were a few bugs:
(1) The T.38 framehook currently prevents a channel capable of T.38 faxes from
ever entering into a direct media bridge. This applies even when the only
media being passed over the channel is audio. This patch fixes this bug
by having the framehook specify that it defers caring about any frame type.
This allows the channels to enter into a direct media bridge, which will
be broken when a re-INVITE is received.
(2) When a re-INVITE is received, nothing instructed the bridging layer to
re-inspect the allowed bridging technology. This now occurs when either
a re-INVITE is received from a peer, or when a response is received from
the far end (that is, when the T.38 state changes to either
T38_PEER_REINVITE or T38_LOCAL_REINVITE).
(3) chan_pjsip needs to do a small amount of work to prevent a direct media
bridge from being chosen when a T.38 session is in progress. When a T.38
session supplement has a t38 datastore - which is added when we detect
we should start thinking about T.38 on a channel - we now refuse a native
RTP bridge.
(4) When a BYE request is received, we don't terminate the T.38 session. If
the other side of a T.38 fax survives the hangup (due to the 'g' flag
in Dial, for example), we don't currently re-INVITE the media on the
other channel back to audio. This patch now has res_pjsip_t38 intercept
BYE requests and inform the far side that the T.38 session is terminated.
This naturally causes the correct re-INVITEs to be sent.
ASTERISK-25582
Change-Id: Iabd6aa578e633d16e6b9f342091264e4324a79eb
When ASTERISK-25449 was closed, a number of scheduler issues mentioned in
the comments were missed. These have since beed raised in ASTERISK-25476
and elsewhere.
This patch attempts to collect all of the scheduler issues discovered so
far and address them sensibly.
ASTERISK-25476 #close
Change-Id: I87a77d581e2e0d91d33b4b2fbff80f64a566d05b
This patch adds a new setting "websockets_enabled" to sip.conf.
Setting this to false allows chan_sip to be used without causing
conflicts with res_pjsip_transport_websocket.
ASTERISK-24106 #close
Reported by: Andrew Nagy
Change-Id: I04fe8c4f2d57b2d7375e0e25826c91a72e93bea7
Since version 13, Asterisk sent all allowed codecs as callee, even when the
caller did not request/support them. In case of dynamic RTP payloads, this led
to the same ID for different codecs, which is not allowed by SIP/SDP. Now, the
intersection between the requested and the supported codecs is send again.
ASTERISK-24543 #close
Change-Id: Ie90cb8bf893b0895f8d505e77343de3ba152a287
Fixed 1 issue in each of the affected files.
ASTERISK-25494 #close
Reported-by: George Joseph
Tested-by: George Joseph
Change-Id: I818f149cd66a93b062df421e1c73c7942f5a4a77
Alexander Traud
George Joseph
Torrey Searle
Mark Michelson
Richard Mudgett
Jenkins2
Joshua Colp
Sean Bright
Vitezslav Novy
Thierry Magnien
Jean Aunis
zuul
Richard Begg
Daniel Journo
Igor Goncharovsky
Norbert Varga
Corey Farrell
Badalyan Vyacheslav
Walter Doekes
Alexei Gradinari
Matt Jordan
Michael Kuron
Timo Teräs
C.J. Collier
Kevin Harwell
Sebastian Gutierrez
Grachev Sergey
Tzafrir Cohen
Moises Silva
Aaron An
Steve Davies
Walter Doekes
varnav
cjack
Vasil Kolev
kkm
Jaco Kroon
George Joseph
Francesco Castellano
StefanEng86
Ward van Wanrooij
Dade Brandon
Jonathan Rose
Eugene Voityuk
Filip Jenicek
Christof Lauber