At one point in time, it seemed like a good idea to use the Asterisk
channel name as the HEP correlation UUID. In particular, it felt like
this would be a useful identifier to tie PJSIP messages and RTCP
messages together, along with whatever other data we may eventually send
to Homer. This also had the benefit of keeping the correlation UUID
channel technology agnostic.
In practice, it isn't as useful as hoped, for two reasons:
1) The first INVITE request received doesn't have a channel. As a
result, there is always an 'odd message out', leading it to be
potentially uncorrelated in Homer.
2) Other systems sending capture packets (Kamailio) use the SIP Call-ID.
This causes RTCP information to be uncorrelated to the SIP message
traffic seen by those capture nodes.
In order to support both (in case someone is trying to use res_hep_rtcp
with a non-PJSIP channel), this patch adds a new option, uuid_type, with
two valid values - 'call-id' and 'channel'. The uuid_type option is used
by a module to determine the preferred UUID type. When available, that
source of a correlation UUID is used; when not, the more readily available
source is used.
For res_hep_pjsip:
- uuid_type = call-id: the module uses the SIP Call-ID header value
- uuid_type = channel: the module uses the channel name if available,
falling back to SIP Call-ID if not
For res_hep_rtcp:
- uuid_type = call-id: the module uses the SIP Call-ID header if the
channel type is PJSIP and we have a channel,
falling back to the Stasis event provided
channel name if not
- uuid_type = channel: the module uses the channel name
ASTERISK-25352 #close
Change-Id: Ide67e59a52d9c806e3cc0a797ea1a4b88a00122c
With the old SIP module we can use IP access controls per peer.
PJSIP module missing this feature.
This patch added next configuration Endpoint options:
"acl" - list of IP ACL section names in acl.conf
"deny" - List of IP addresses to deny access from
"permit" - List of IP addresses to permit access from
"contact_acl" - List of Contact ACL section names in acl.conf
"contact_deny" - List of Contact header addresses to deny
"contact_permit" - List of Contact header addresses to permit
This patch also better logging failed request:
add custom message instead of "No matching endpoint found"
add SIP method to logging
ASTERISK-25900
Change-Id: I456dea3909d929d413864fb347d28578415ebf02
This migrates res_pjsip_pubsub over to using the newly
introduce common datastores management API instead of using
its own implementations for both subscriptions and
publications.
As well the extension state data now provides a generic
datastores container instead of a subscription. This allows
the dialog-info+xml body generator to work for both
subscriptions and publications.
ASTERISK-25999 #close
Change-Id: I773f9e4f35092da0f653566736a8647e8cfebef1
This change introduces a common container based datastores
management API. This has been done in a few places across
the tree but this consolidates all of the logic into one
place in a generic fashion.
ASTERISK-25999
Change-Id: I72eb15941dcdbc2a37bb00a33ce00f8755bd336a
The pjsua and pjsystest apps are now built only if TEST_FRAMEWORK is set.
The python bindings are now built only if TEST_FRAMEWORK is set and a
python development package is installed.
libresample was also disabled.
ASTERISK-25993 #close
Reported-by: Joshua Colp
Change-Id: If4e91c503a02f113d5b71bc8b972081fa3ff6f03
With the old SIP module AMI sends PeerStatus event on every
successfully REGISTER requests, ie, on start registration,
update registration and stop registration.
With PJSIP AMI sends ContactStatus only when status is changed.
Regarding registration:
on start registration - Created
on stop registration - Removed
but on update registration nothing
This patch added contact.updated event.
ASTERISK-25904
Change-Id: I8fad8aae9305481469c38d2146e1ba3a56d3108f
If the Asterisk system name is set in asterisk.conf, it will be stored
into the "reg_server" field in the ps_contacts table to facilitate
multi-server setups.
ASTERISK-25931
Change-Id: Ia8f6bd2267809c78753b52bcf21835b9b59f4cb8
Create PUBLISH messages to update a third party when an extension state
changes because of either a device or presence state change.
A configuration example:
[exten-state-publisher]
type=outbound-publish
server_uri=sip:instance1@172.16.10.2
event=presence
; Optional regex for context filtering, if specified only extension state
; for contexts matching the regex will cause a PUBLISH to be sent.
@context=^users
; Optional regex for extension filtering, if specified only extension
; state for extensions matching the regex will cause a PUBLISH to be sent.
@exten=^[0-9]*
; Required body type for the PUBLISH message.
;
; Supported values are:
; application/pidf+xml
; application/xpidf+xml
; application/cpim-pidf+xml
; application/dialog-info+xml (Planned support but not yet)
@body=application/pidf+xml
The '@' extended variables are used because the implementation can't
extend the outbound publish type as it is provided by the outbound publish
module. That means you either have to use extended variables, or
implement some sort of custom extended variable thing in the outbound
publish module. Another option would be to refactor that stuff to have an
option which specifies the use of an alternate implementation's
configuration and then have that passed to the implementation. JColp
opted for the extended variables method originally.
ASTERISK-25972 #close
Change-Id: Ic0dab4022f5cf59302129483ed38398764ee3cca
When starting the extension state publishers, check if the requested
message body generator is available. If not available give error message
and skip starting that publisher.
* res_pjsip_pubsub.c: Create new API if type/subtype generator
registered.
* res_pjsip_exten_state.c: Use new body generator API for validation.
ASTERISK-25922
Change-Id: I4ad69200666e3cc909d4619e3c81042d7f9db25c
A feature of chan_sip that service providers relied upon was the ability to
identify by the Authorization username. This is most often used when customers
have a PBX that needs to register rather than identify by IP address. From my
own experiance, this is pretty common with small businesses who otherwise
don't need a static IP.
In this scenario, a register from the customer's PBX may succeed because From
will usually contain the PBXs account id but an INVITE will contain the caller
id. With nothing recognizable in From, the service provider's Asterisk can
never match to an endpoint and the INVITE just stays unauthorized.
The fixes:
A new value "auth_username" has been added to endpoint/identify_by that
will use the username and digest fields in the Authorization header
instead of username and domain in the the From header to match an endpoint,
or the To header to match an aor. This code as added to
res_pjsip_endpoint_identifier_user rather than creating a new module.
Although identify_by was always a comma-separated list, there was only
1 choice so order wasn't preserved. So to keep the order, a vector was added
to the end of ast_sip_endpoint. This is only used by res_pjsip_registrar
to find the aor. The res_pjsip_endpoint_identifier_* modules are called in
globals/endpoint_identifier_order.
Along the way, the logic in res_pjsip_registrar was corrected to match
most-specific to least-specific as res_pjsip_endpoint_identifier_user does.
The order is:
username@domain
username@domain_alias
username
Auth by username does present 1 problem however, the first INVITE won't have
an Authorization header so the distributor, not finding a match on anything,
sends a securty_alert. It still sends a 401 with a challenge so the next
INVITE will have the Authorization header and presumably succeed. As a result
though, that first security alert is actually a false alarm.
To address this, a new feature has been added to pjsip_distributor that keeps
track of unidentified requests and only sends the security alert if a
configurable number of unidentified requests come from the same IP in a
configurable amout of time. Those configuration options have been added to
the global config object. This feature is only used when auth_username
is enabled.
Finally, default_realm was added to the globals object to replace the hard
coded "asterisk" used when an endpoint is not yet identified.
The testsuite tests all pass but new tests are forthcoming for this new
feature.
ASTERISK-25835 #close
Reported-by: Ross Beer
Change-Id: I30ba62d208e6f63439600916fcd1c08a365ed69d
This patch added new global pjsip option 'disable_multi_domain'.
Disabling Multi Domain can improve Realtime performance by reducing
number of database requests.
ASTERISK-25930 #close
Change-Id: I2e7160f3aae68475d52742107949a799aa2c7dc7
* changes:
test_message.c: Wait longer in case dialplan also processes the test message.
Manager: Short circuit AMI message processing.
manager.c: Eliminate most RAII_VAR usage.
You cannot reference the passed in features struct after calling
ast_bridge_impart(). Even if the call fails.
Change-Id: I902b88ba0d5d39520e670fb635078a367268ea21
softmix_bridge_join() failed because of an allocation failure. To address
this, the softmix bridge technology now checks if the channel failed to
join softmix successfully. In addition, the bridge now begins the process
of kicking the channel out of the bridge so we don't have channels
partially in the bridge for very long.
* Fix the test_channel_feature_hooks.c unit tests. The test channel must
have a valid codec to join the simple_bridge technology. This patch makes
joining a bridge more strict by not allowing partially joined channels to
remain in the bridge.
Change-Id: I97e2ade6a2bcd1214f24fb839fda948825b61a2b
Improve AMI message processing performance if there are no consumers
listening for the messages. We now skip creating the AMI event message
text strings.
Change-Id: I7b22fc5ec4e500d00635c1a467aa8ea68a1bb2b3
An earlier patch blocked the ast_bridge_impart() call until the channel
either entered the target bridge or it failed. Unfortuantely, if the
target bridge is stasis and the imprted channel is not a stasis channel,
stasis bounces the channel out of the bridge to come back into the bridge
as a proper stasis channel. When the channel is bounced out, that
released the block on ast_bridge_impart() to continue. If the impart was
a result of a transfer, then it became a race to see if the swap channel
would get hung up before the imparted channel could come back into the
stasis bridge. If the imparted channel won then everything is fine. If
the swap channel gets hung up first then the transfer will fail because
the swap channel is leaving the bridge.
* Allow a chain of ast_bridge_impart()'s to happen before any are
unblocked to prevent the race condition described above. When the channel
finally joins the bridge or completely fails to join the bridge then the
ast_bridge_impart() instances are unblocked.
ASTERISK-25947
Reported by: Richard Mudgett
ASTERISK-24649
Reported by: John Bigelow
ASTERISK-24782
Reported by: John Bigelow
Change-Id: I8fef369171f295f580024ab4971e95c799d0dde1
There are several places that do scheduled tasks or periodic housecleaning,
each with its own implementation:
* res_pjsip_keepalive has a thread that sends keepalives.
* pjsip_distributor has a thread that cleans up expired unidentified requests.
* res_pjsip_registrar_expire has a thread that cleans up expired contacts.
* res_pjsip_pubsub uses ast_sched directly and then calls ast_sip_push_task.
* res_pjsip_sdp_rtp also uses ast_sched to send keepalives.
There are also places where we should be doing scheduled work but aren't.
A good example are the places we have sorcery observers to start registration
or qualify. These don't work when changes are made to a backend database
without a pjsip reload. We need to check periodically.
As a first step to solving these issues, a new ast_sip_sched facility has
been created.
ast_sip_sched wraps ast_sched but only uses ast_sched as a scheduled queue.
When a task is ready to run, ast_sip_task_pusk is called for it. This ensures
that the task is executed in a PJLIB registered thread and doesn't hold up the
ast_sched thread so it can immediately continue processing the queue. The
serializer used by ast_sip_sched is one of your choosing or a random one from
the res_pjsip pool if you don't choose one.
Another feature is the ability to automatically clean up the task_data when the
task expires (if ever). If it's an ao2 object, it will be dereferenced, if
it's a malloc'd object it will be freed. This is selectable when the task is
scheduled. Even if you choose to not auto dereference an ao2 task data object,
the scheduler itself maintains a reference to it while the task is under it's
control. This prevents the data from disappearing out from under the task.
There are two scheduling models.
AST_SIP_SCHED_TASK_PERIODIC specifies that the invocations of the task occur at
the specific interval. That is, every "interval" milliseconds, regardless of
how long the task takes. If the task takes longer than the interval, it will
be scheduled at the next available multiple of interval. For exmaple: If the
task has an interval of 60 secs and the task takes 70 secs (it better not),
the next invocation will happen at 120 seconds.
AST_SIP_SCHED_TASK_DELAY specifies that the next invocation of the task should
start "interval" milliseconds after the current invocation has finished.
Also, the same ast_sched facility for fixed or variable intervals exists. The
task's return code in conjunction with the AST_SIP_SCHED_TASK_FIXED or
AST_SIP_SCHED_TASK_VARIABLE flags controls the next invocation start time.
One res_pjsip.h housekeeping change was made. The pjsip header files were
added to the top. There have been a few cases lately where I've needed
res_pjsip.h just for ast_sip calls and had compiles fail spectacularly because
I didn't add the pjsip header files to my source even though I never referenced
any pjsip calls.
Finally, a few new convenience APIs were added to astobj2 to make things a
little easier in the scheduler. ao2_ref_and_lock() calls ao2_ref() and
ao2_lock() in one go. ao2_unlock_and_unref() does the reverse. A few macros
were also copied from res_phoneprov because I got tired of having to duplicate
the same hash, sort and compare functions over and over again. The
AO2_STRING_FIELD_(HASH|SORT|CMP)_FN macros will insert functions suitable for
aor_container_alloc into your source.
This facility can be used immediately for the situations where we already have
a thread that wakes up periodically or do some scheduled work. For the
registration and qualify issues, additional sorcery and schema changes would
need to be made so that we can easily detect changed objects on a periodic
basis without having to pull the entire database back to check. I'm thinking
of a last-updated timestamp on the rows but more on this later.
Change-Id: I7af6ad2b2d896ea68e478aa1ae201d6dd016ba1c
In 13, the new ast_string_field_header structure had to be dynamically
allocated and assigned to a pointer in ast_string_field_mgr to preserve ABI
compatability. In master, it can be converted to being a structure-in-place in
ast_string_field_mgr to eliminate the extra alloc and free calls.
Change-Id: Ia97c5345eec68717a15dc16fe2e6746ff2a926f4
Contact expiration can occur in several places: res_pjsip_registrar,
res_pjsip_registrar_expire, and automatically when anyone calls
ast_sip_location_retrieve_aor_contact. At the same time, res_pjsip_registrar
may also be attempting to renew or add a contact. Since none of this was locked
it was possible for one thread to be renewing a contact and another thread to
expire it immediately because it was working off of stale data. This was the
casue of intermittent registration/inbound/nominal/multiple_contacts test
failures.
Now, the new named lock functionality is used to lock the aor during contact
expire and add operations and res_pjsip_registrar_expire now checks the
expiration with the lock held before deleting the contact.
ASTERISK-25885 #close
Reported-by: Josh Colp
Change-Id: I83d413c46a47796f3ab052ca3b349f21cca47059
Locking some objects like sorcery objects can be tricky because the underlying
ao2 object may not be the same for all callers. For instance, two threads that
call ast_sorcery_retrieve_by_id on the same aor name might actually get 2
different ao2 objects if the underlying wizard had to rehydrate the aor from a
database. Locking one ao2 object doesn't have any effect on the other even if
those objects had locks in the first place.
Named locks allow access control by keyspace and key strings. Now an "aor"
named "1000" can be locked and any other thread attempting to lock "aor" "1000"
will wait regardless of whether the underlying ao2 object is the same or not.
Mutex and rwlocks are supported.
This capability will initially be used to lock an aor when multiple threads may
be attempting to prune expired contacts from it.
Change-Id: If258c0b7f92b02d07243ce70e535821a1ea7fb45
This eliminates some casts that I made a note saying v10 and above
would no longer need them.
Better late than never :)
Change-Id: I346cdb3032b6478ceb40eb6fe732978b54035572
This adds a new ARI method that allows for you to dial a channel that
you previously created in ARI.
By combining this with the create method for channels, it allows for a
workflow where a channel can be created, manipulated, and then dialed.
The channel is under control of the ARI application during all stages of
the Dial and can even be manipulated based on channel state changes
observed within an ARI application.
The overarching goal for this is to eventually be able to add a dialed
channel to a Stasis bridge earlier than the "Up" state. However, at the
moment more work is needed in the Dial and Bridge APIs in order to
facilitate that.
ASTERISK-25889 #close
Change-Id: Ic6c399c791e66c4aa52454222fe4f8b02483a205
This change introduces the concept of autohints. These are hints
which are created as a result of device state changes occurring within
the core. When this happens a hint will be created (if it does not
exist already) using the device name as the extension.
For example if a device state change is received for "PJSIP/bob"
and autohints are enabled on a context then a hint will exist in
that context for "bob" with a device of "PJSIP/bob".
For virtual or custom device states the name after the type will
be used. For example if the device state of "Custom:bob" changes
then a hint will exist in that context for "bob" with a device of
"Custom:bob".
This functionality can be enabled in extensions.conf by placing
"autohints=yes" in a context.
ASTERISK-25881 #close
Change-Id: I7e444c7da41b7b7d33374420fec658beeb18584e
The Dial API takes responsiblity for creating an outbound channel when
calling ast_dial_append(). This commit adds a new function,
ast_dial_append_channel(), which allows us to create the channel outside
the Dial API and then to append the channel to the ast_dial structure.
This is useful for situations where the channel's creation and dialing
are distinct operations. Upcoming ARI early bridge work will illustrate
its usage.
ASTERISK-25889
Change-Id: Id8179f64f8f99132f80dead8d5db2030fd2c0509
String fields are great, except that you can't add new ones without breaking
ABI compatibility because it shifts down everything else in the structure.
The only alternative is to add your own char * field to the end of the
structure and manage the memory yourself which isn't ideal, especially since
you then can't use the OPT_STRINGFIELD_T type.
Background:
The reason string fields had to be declared inside the
AST_DECLARE_STRING_FIELDS block was to facilitate iteration over all declared
fields for initialization, compare and copy. Since AST_DECLARE_STRING_FIELDS
declared the pool, then the fields, then the manager, you could use the offsets
of the pool and manager and iterate over the sequential addresses in between to
access the fields. The actual pool, field allocation and field set operations
don't actually care where the field is. It's just iteration over the fields
that was the problem.
Solution: Extended String Fields
An extended string field is one that is declared outside the
AST_DECLARE_STRING_FIELDS block but still (anywhere) inside the parent
structure. Other than using AST_STRING_FIELD_EXTENDED instead of
AST_STRING_FIELD, it looks the same as other string fields. It's storage comes
from the pool and it participates in string field compare and copy operations
peformed on the parent structure. It's also a valid target for the
OPT_STRINGFIELD_T aco option type.
Implementation:
To keep track of the extended fields and make sure that ABI isn't broken, the
existing embedded_pool pointer in the manager structure was repurposed to be a
pointer to a separate header structure that contains the embedded_pool pointer
plus a vector of fields. The length of the manager structure didn't change and
the embedded_pool pointer isn't used in the macros, only the stringfields C
code. A side benefit of this is that changing the header structure in the
future won't break ABI.
ast_string_fields_init initializes the normal string fields and appends them to
the vector, and subsequent calls to ast_string_field_init_extended initialize
and append the extended fields. Cleanup, ast_string_fields_cmp, and
ast_string_fields_copy can now work on the vector instead of sequentially
traversing the addresses between the pool and manager.
The total size of a structure using string fields didn't change, whether using
extended fields or not, nor have the offsets of any structure members, either
inside the original block or outside. Adding an extended field to the end of a
structure is the same as adding a char *.
Details:
The stringfield C code was pulled out from utils.c and into stringfields.c.
It just made sense.
Additional work was done in ast_string_field_init and
ast_calloc_with_stringfields to handle the allocation of the new header
structure and the vector, and the associated cleanup. In the process some
additional NULL pointer checking was added.
A lot of work was done in stringfields.h since the logic for compare and copy
is there. Documentation was added as well as somne additional NULL checking.
The ability to call ast_calloc_with_stringfields with a number of structures
greater than 1 never really worked. Well, the calloc worked but there was no
way to access the additional structures or clean them up. It was agreed that
there was no use case for requesting more than 1 structure so an ast_assert
was added to prevent it and the iteration code removed.
Testing:
The stringfield unit tests were updated to test both normal and extended
fields. Tests for ast_string_field_ptr_set_by_fields and
ast_calloc_with_stringfields were also added.
As an ABI test, 13 was compiled from git and the res_pjsip_* modules, except
res_pjsip itself, saved off. The patch was then added and a full compile and
install was performed. Then the older res_pjsip_* moduled were copied over the
installed versions so res_pjsip was new and the rest were old. No issues.
contact->aor, which is a char * at the end of contact, was then changed to an
extended string field and a recompile and reinstall was performed, again
leaving stock versions of the the res_pjsip_* modules. Again, no issues with
the res_pjsip_* modules using the old stringfield implementation and with
contact->aor as a char *, and res_pjsip itself using the new stringfield
implementation and contact->aor being an extended string field.
Finally, several existing string fields were converted to extended string
fields to test OPT_STRINGFIELD_T. Again, no issues.
Change-Id: I235db338c5b178f5a13b7946afbaa5d4a0f91d61
The stasis_app_playback and stasis_app_recording structs need to have a
struct stasis_app_control ref. Other threads can get a reference to the
playback and recording structs from their respective global container.
These other threads can then use the control pointer they contain after
the control struct has gone.
* Add control ref to stasis_app_playback and stasis_app_recording structs.
With the refs added, the control command queue can now have a circular
control reference which will cause the control struct to never get
released if the control's command queue is not flushed when the channel
leaves the Stasis application. Also the command queue needs better
protection from adding commands if the control->is_done flag is set.
* Flush the control command queue on exit.
ASTERISK-25882 #close
Change-Id: I3cf1fb59cbe6f50f20d9e35a2c07ac07d7f4320d
res_pjsip_mwi was missing the chan_sip "vmexten" functionality which adds
the Message-Account header to the MWI NOTIFY. Also, specifying mailboxes
on endpoints for unsolicited mwi and on aors for subscriptions required
that the admin know in advance which the client wanted. If you specified
mailboxes on the endpoint, subscriptions were rejected even if you also
specified mailboxes on the aor.
Voicemail extension:
* Added a global default_voicemail_extension which defaults to "".
* Added voicemail_extension to both endpoint and aor.
* Added ast_sip_subscription_get_dialog for support.
* Added ast_sip_subscription_get_sip_uri for support.
When an unsolicited NOTIFY is constructed, the From header is parsed, the
voicemail extension from the endpoint is substituted for the user, and the
result placed in the Message-Account field in the body.
When a subscribed NOTIFY is constructed, the subscription dialog local uri
is parsed, the voicemail_extension from the aor (looked up from the
subscription resource name) is substituted for the user, and the result
placed in the Message-Account field in the body.
If no voicemail extension was defined, the Message-Account field is not added
to the NOTIFY body.
mwi_subscribe_replaces_unsolicited:
* Added mwi_subscribe_replaces_unsolicited to endpoint.
The previous behavior was to reject a subscribe if a previous internal
subscription for unsolicited MWI was found for the mailbox. That remains the
default. However, if there are mailboxes also set on the aor and the client
subscribes and mwi_subscribe_replaces_unsolicited is set, the existing internal
subscription is removed and replaced with the external subscription. This
allows an admin to configure mailboxes on both the endpoint and aor and allows
the client to select which to use.
ASTERISK-25865 #close
Reported-by: Ross Beer
Change-Id: Ic15a9415091760539c7134a5ba3dc4a6a1217cea
Asterisk uses separate UDP ports for RTP and RTCP traffic and RFC 5764
explicitly states:
There MUST be a separate DTLS-SRTP session for each distinct pair of
source and destination ports used by a media session
This means RTP keying material cannot be used for DTLS RTCP, which was
the reason why RTCP encryption would fail.
ASTERISK-25642
Change-Id: I7e8779d8b63e371088081bb113131361b2847e3a
rxcount, txcount, rxoctetcount and txoctetcount weren't being calculated
for bridged streams because the calulations were being done after the
bridged short-circuit. Actually, rxoctetcount wasn't ever being calculated.
Moved the calculations so they occur for all valid received packets and
all transmitted packets. Also added rxoctetcount and txoctetcount to
ast_rtp_instance_stat.
Change-Id: I08fb06011a82d38c3b4068867a615068fbe59cbb
There were a number of places in the res_pjsip stack that were getting
all endpoints or all aors, and then filtering them locally.
A good example is pjsip_options which, on startup, retrieves all
endpoints, then the aors for those endpoints, then tests the aors to see
if the qualify_frequency is > 0. One issue was that it never did
anything with the endpoints other than retrieve the aors so we probably
could have skipped a step and just retrieved all aors. But nevermind.
This worked reasonably well with local config files but with a realtime
backend and thousands of objects, this was a nightmare. The issue
really boiled down to the fact that while realtime supports predicates
that are passed to the database engine, the non-realtime sorcery
backends didn't.
They do now.
The realtime engines have a scheme for doing simple comparisons. They
take in an ast_variable (or list) for matching, and the name of each
variable can contain an operator. For instance, a name of
"qualify_frequency >" and a value of "0" would create a SQL predicate
that looks like "where qualify_frequency > '0'". If there's no operator
after the name, the engines add an '=' so a simple name of
"qualify_frequency" and a value of "10" would return exact matches.
The non-realtime backends decide whether to include an object in a
result set by calling ast_sorcery_changeset_create on every object in
the internal container. However, ast_sorcery_changeset_create only does
exact string matches though so a name of "qualify_frequency >" and a
value of "0" returns nothing because the literal "qualify_frequency >"
doesn't match any name in the objset set.
So, the real task was to create a generic string matcher that can take a
left value, operator and a right value and perform the match. To that
end, strings.c has a new ast_strings_match(left, operator, right)
function. Left and right are the strings to operate on and the operator
can be a string containing any of the following: = (or NULL or ""), !=,
>, >=, <, <=, like or regex. If the operator is like or regex, the
right string should be a %-pattern or a regex expression. If both left
and right can be converted to float, then a numeric comparison is
performed, otherwise a string comparison is performed.
To use this new function on ast_variables, 2 new functions were added to
config.c. One that compares 2 ast_variables, and one that compares 2
ast_variable lists. The former is useful when you want to compare 2
ast_variables that happen to be in a list but don't want to traverse the
list. The latter will traverse the right list and return true if all
the variables in it match the left list.
Now, the backends' fields_cmp functions call ast_variable_lists_match
instead of ast_sorcery_changeset_create and they can now process the
same syntax as the realtime engines. The realtime backend just passes
the variable list unaltered to the engine. The only gotcha is that
there's no common realtime engine support for regex so that's been noted
in the api docs for ast_sorcery_retrieve_by_fields.
Only one more change to sorcery was done... A new config flag
"allow_unqualified_fetch" was added to reg_sorcery_realtime.
"no": ignore fetches if no predicate fields were supplied.
"error": same as no but emit an error. (good for testing)
"yes": allow (the default);
"warn": allow but emit a warning. (good for testing)
Now on to res_pjsip...
pjsip_options was modified to retrieve aors with qualify_frequency > 0
rather than all endpoints then all aors. Not only was this a big
improvement in realtime retrieval but even for config files there's an
improvement because we're not going through endpoints anymore.
res_pjsip_mwi was modified to retieve only endpoints with something in
the mailboxes field instead of all endpoints then testing mailboxes.
res_pjsip_registrar_expire was completely refactored. It was retrieving
all contacts then setting up scheduler entries to check for expiration.
Now, it's a single thread (like keepalive) that periodically retrieves
only contacts whose expiration time is < now and deletes them. A new
contact_expiration_check_interval was added to global with a default of
30 seconds.
Ross Beer reports that with this patch, his Asterisk startup time dropped
from around an hour to under 30 seconds.
There are still objects that can't be filtered at the database like
identifies, transports, and registrations. These are not going to be
anywhere near as numerous as endpoints, aors, auths, contacts however.
Back to allow_unqualified_fetch. If this is set to yes and you have a
very large number of objects in the database, the pjsip CLI commands
will attempt to retrive ALL of them if not qualified with a LIKE.
Worse, if you type "pjsip show endpoint <tab>" guess what's going to
happen? :) Having a cache helps but all the objects will have to be
retrieved at least once to fill the cache. Setting
allow_unqualified_fetch=no prevents the mass retrieve and should be used
on endpoints, auths, aors, and contacts. It should NOT be used for
identifies, registrations and transports since these MUST be
retrieved in bulk.
Example sorcery.conf:
[res_pjsip]
endpoint=config,pjsip.conf,criteria=type=endpoint
endpoint=realtime,ps_endpoints,allow_unqualified_fetch=error
ASTERISK-25826 #close
Reported-by: Ross Beer
Tested-by: Ross Beer
Change-Id: Id2691e447db90892890036e663aaf907b2dc1c67
During stress testing, we have frequently seen crashes occur because a
CLI or AMI command attempts to access information that is in the process
of being destroyed.
When addressing how to fix this issue, we initially considered fixing
individual crashes we observed. However, the changes required to fix
those problems would introduce considerable overhead to the nominal
case. This is not reasonable in order to prevent a crash from occurring
while Asterisk is already shutting down.
Instead, this change makes it so AMI and CLI commands cannot be executed
if Asterisk is being shut down. For AMI, this is absolute. For CLI,
though, certain commands can be registered so that they may be run
during Asterisk shutdown.
ASTERISK-25825 #close
Change-Id: I8887e215ac352fadf7f4c1e082da9089b1421990
Older versions of PJSIP do not have the proto field on the TLS transport
setting structure. This change adds a configure check so even if it is
not present we will still be able to build.
Change-Id: Ibf3f47befb91ed1b8194bf63888baa6fee05aba9
Channel masquerading had a conflict with autochannel locking.
When locking autochannel->channel, the channel is fetched from the
autochannel and then locked. During the fetch, the autochannel -- which
has no locks itself -- can be modified by someone who owns the channel
lock. That means that the value of autochan->channel cannot be trusted
until you hold the lock.
In practice, this caused problems with Local channels getting
masqueraded away while the ChanSpy attempted to get info from that
channel. The old channel which was about to get removed got locked, but
the new (replaced) channel got unlocked (no-op). Because the replaced
channel was now locked (and would never get unlocked), it couldn't get
removed from the channel list in a timely manner, and would now cause
deadlocks when iterating over the channel list.
This change checks the autochannel after locking the channel for changes
to the autochannel. If the channel had been changed, the lock is
reobtained on the new channel.
In theory it seems possible that after this fix, the lock attempt on the
old (wrong) channel can be on an already destroyed lock, maybe causing
a crash. But that hasn't been observed in the wild and is harder induce
than the current deadlock.
Thanks go to Filip Frank for suggesting a fix similar to this and
especially to IRC user hexanol for pointing out why this deadlock was
possible and testing this fix. And to Richard for catching my rookie
while loop mistake ;)
ASTERISK-25321 #close
Change-Id: I293ae0014e531cd0e675c3f02d1d118a98683def
Refactor and created function ast_cli_print_timestr_fromseconds to print
seconds formatted: year(s) week(s) day(s) hour(s) second(s)
This function now is used in addons/cdr_mysql.c,cdr_pgsql.c, main/cli.c,
res_config_ldap.c, res_config_pgsql.c.
Change-Id: Ibeb8634102cd11d3f8623398b279cb731bcde36c
Per RFC3325, the 'From' header is now anonymized on outgoing calls when
caller id presentation is prohibited.
TID = trust_id_outbound
PRO = Set(CALLERID(pres)=prohib)
USR = endpoint/from_user
DOM = endpoint/from_domain
PAI = YES(privacy=off), NO(not sent), PRI(privacy=full) (assumes send_pai=yes)
Conditions |Result
--------------------|----------------------------------------------------
TID PRO USR DOM |PAI FROM
--------------------|----------------------------------------------------
Y Y abc def.ghi |PRI "Anonymous" <sip:abc@def.ghi>
Y Y abc |PRI "Anonymous" <sip:abc@anonymous.invalid>
Y Y def.ghi |PRI "Anonymous" <sip:anonymous@def.ghi>
Y Y |PRI "Anonymous" <sip:anonymous@anonymous.invalid>
Y N abc def.ghi |YES <sip:abc@def.ghi>
Y N abc |YES <sip:abc@<ip_address>>
Y N def.ghi |YES "Caller Name" <sip:<caller_exten>@def.ghi>
Y N |YES "Caller Name" <sip:<caller_exten>@<ip_address>>
N Y abc def.ghi |NO "Anonymous" <sip:abc@def.ghi>
N Y abc |NO "Anonymous" <sip:abc@anonymous.invalid>
N Y def.ghi |NO "Anonymous" <sip:anonymous@def.ghi>
N Y |NO "Anonymous" <sip:anonymous@anonymous.invalid>
N N abc def.ghi |YES <sip:abc@def.ghi>
N N abc |YES <sip:abc@<ip_address>>
N N def.ghi |YES "Caller Name" <sip:<caller_exten>@def.ghi>
N N |YES "Caller Name" <sip:<caller_exten>@<ip_address>>
ASTERISK-25791 #close
Reported-by: Anthony Messina
Change-Id: I2c82a5ca1413c2c00fb62ea95b0ae8e97af54dc9
It's possible for the transferer channel to get hung up early during the
attended transfer process. For instance, a phone may send a "bye" immediately
upon receiving a sip notify that contains a sip frag 100 (I'm looking at you
Jitsi). When this occurs a race begins between the transferer being hung up
and completion of the transfer code.
If the channel hangs up too early during a transfer involving stasis bridging
for instance, then when the created local channel goes to look up its swap
channel (and associated datastore) it can't find it (since it is no longer in
the bridge) thus it fails to enter the stasis application. Consequently, the
created local channel(s) hang up as well. If the timing is just right then the
bridging code attempts to add the message link with missing local channel(s).
Hence the crash.
Unfortunately, there is no great way to solve the problem of the unexpected
"bye". While we can't guarantee we won't receive an early hangup, and in this
case still fail to enter the stasis application, we can make it so asterisk
does not crash.
This patch does just that by locking the local channel structure, checking
that the local channel's peer has not been lost, and then continuing. This
keeps the local channel's peer from being ripped out from underneath it by
the local/unreal hangup code while attempting to set the stasis message link.
ASTERISK-25771
Change-Id: Ie6d6061e34c7c95f07116fffac9a09e5d225c880
Background here:
http://lists.digium.com/pipermail/asterisk-dev/2016-January/075266.html
From CHANGES:
* To help insure that Asterisk is compiled and run with the same known
version of pjproject, a new option (--with-pjproject-bundled) has been
added to ./configure. When specified, the version of pjproject specified
in third-party/versions.mak will be downloaded and configured. When you
make Asterisk, the build process will also automatically build pjproject
and Asterisk will be statically linked to it. Once a particular version
of pjproject is configured and built, it won't be configured or built
again unless you run a 'make distclean'.
To facilitate testing, when 'make install' is run, the pjsua and pjsystest
utilities and the pjproject python bindings will be installed in
ASTDATADIR/third-party/pjproject.
The default behavior remains building with the shared pjproject
installation, if any.
Building:
All you have to do is include the --with-pjproject-bundled option on
the ./configure command line (and remove any existing --with-pjproject
option if specified). Everything else is automatic.
Behind the scenes:
The top-level Makefile was modified to include 'third-party' in the
list of MOD_SUBDIRS.
The third-party directory was created to contain any third party
packages that may be needed in the future. Its Makefile automatically
iterates over any subdirectories passing on targets.
The third-party/pjproject directory was created to house the pjproject
source distribution. Its Makefile contains targets to download, patch
configure, generate dependencies, compile libs, apps and python bindings,
sanitized build.mak and generate a symbols list.
When bootstrap.sh is run, it automatically includes the configure.m4
file in third-party/pjproject. This file has a macro to download and
conifgure pjproject and get and set PJPROJECT_INCLUDE, PJPROJECT_DIR
and PJPROJECT_BUNDLED. It also tests for the capabilities like
PJ_TRANSACTION_GRP_LOCK by parsing preprocessor output as opposed to
trying to compile. Of course, bootstrap.sh is only run once and the
configure file is incldued in the patch.
When configure is run with the new options, the macro in configure.m4
triggers the download, patch, conifgure and tests. No compilation is
performed at this time. The downloaded tarball is cached in /tmp so
it doesn't get downloaded again on a distclean.
When make is run in the top-level Asterisk source directory, it will
automatically descend all the subdirectories in third_party just as it
does for addons, apps, etc. The top-level Makefile makes sure that
the 'third-party' is built before 'main' so that dependencies from the
other directories are built first.
When main does build, a new shared library (libasteriskpj) is created that
links statically to the pjproject .a files and exports all their symbols.
The asterisk binary links to that, just as it does with libasteriskssl.
When Asterisk is installed, the pjsua and pjsystest apps, and the pjproject
python bindings are installed in ASTDATADIR/third-party/pjproject. This
will facilitate testing, including running the testsuite which will be
updated to check that directory for the pjsua module ahead of the system
python library.
Modules should continue to depend on pjproject if they use pjproject APIs
directly. They should not care about the implementation. No changes to any
res_pjsip modules were made.
Change-Id: Ia7a60c28c2e9ba9537c5570f933c1ebcb20a3103
The channel is now going to get T.38 terminated when it leaves the
bridging system and the bridged peers are going to get T.38 terminated as
well.
ASTERISK-25582
Change-Id: I77a9205979910210e3068e1ddff400dbf35c4ca7
Local channel optimization could cause DTMF digits to be duplicated.
Pending DTMF end events would be posted to a bridge when the local channel
optimizes out and is replaced by the channel further down the chain. When
the real digit ends, the channel would get another DTMF end posted to the
bridge.
A -- LocalA;1/n -- LocalA;2/n -- LocalB;1 -- LocalB;2 -- B
1) LocalA has the /n flag to prevent optimization.
2) B is sending DTMF to A through the local channel chain.
3) When LocalB optimizes out it can move B to the position of LocalB;1
4) Without this patch, when B swaps with LocalB;1 then LocalB;1 would
settle an owed DTMF end to the bridge toward LocalA;2.
5) When B finally ends its DTMF it sends the DTMF end down the chain.
6) Without this patch, A would hear the DTMF digit end when LocalB
optimizes out and when B ends the original digit.
ASTERISK-25582
Change-Id: I1bbd28b8b399c0fb54985a5747f330a4cd2aa251
The 'reload' mechanism actually involves closing the underlying
socket and calling the appropriate udp, tcp or tls start functions
again. Only outbound_registration, pubsub and session needed work
to reset the transport before sending requests to insure that the
pjsip transport didn't get pulled out from under them.
In my testing, no calls were dropped when a transport was changed
for any of the 3 transport types even if ip addresses or ports were
changed. To be on the safe side however, a new transport option was
added (allow_reload) which defaults to 'no'. Unless it's explicitly
set to 'yes' for a transport, changes to that transport will be ignored
on a reload of res_pjsip. This should preserve the current behavior.
Change-Id: I5e759850e25958117d4c02f62ceb7244d7ec9edf
Pjproject has deprecated pjsip_dlg_create_uas in 2.5 and replaced it with
pjsip_dlg_create_uas_and_inc_lock which, as the name implies, automatically
increments the lock on the returned dialog. To account for this, configure.ac
now detects the presence of pjsip_dlg_create_uas_and_inc_lock and res_pjsip.c
has an #ifdef HAVE_PJSIP_DLG_CREATE_UAS_AND_INC_LOCK to decide whether to use
the original call or the new one. If the new one was used, the ref count is
decremented before returning.
ASTERISK-25751 #close
Reported-by Josh Colp
Change-Id: I1be776b94761df03bd0693bc7795a75682615ca8
FD_SET contains a conditional statement to protect against buffer
overruns. The statement was overly complicated and prevented use
of the last array element of ast_fdset. We now just verify the fd
is less than ast_FDMAX.
Change-Id: I41895c0b497b052aef5bf49d75c817c48b326f40
Attempting to load a transport from realtime was forcing asterisk into an
infinite recursion loop. The first thing transport_apply did was to do a
sorcery retrieve by id for an existing transport of the same name. For files,
this just returns the previous object from res_sorcery_config's internal
container, if any. For realtime, the res_sourcery_realtime driver looks in the
database and finds the existing row but now it has to rehydrate it into a
sorcery object which means calling... transport_apply. And so it goes.
The main issue with loading from realtime (apart from the loop) was that
transport stores structures and pointers directly in the ast_sip_transport
structure instead of the separate ast_transport_state structure. This patch
separates those items into the ast_sip_transport_state structure. The pattern
is roughly the same as res_pjsip_outbound_registration.
Although all current usages of ast_sip_transport and ast_sip_transport_state
were modified to use the new ast_sip_get_transport_state API, the original
items are left in ast_sip_transport and kept updated to maintain ABI
compatability for third-party modules. They are marked as deprecated and
noted that they're now in ast_sip_transport_state.
ASTERISK-25606 #close
Reported-by: Martin Moučka
Change-Id: Ic7a836ea8e786e8def51fe3f8cce855ea54f5f19
The SSL_OP_NO_TLSv1_1 and SSL_OP_NO_TLSv1_2 defines did not exist prior
to OpenSSL version 1.0.1. A recent commit attempts to, by default, set
these options, which can cause problems on systems with older OpenSSL
installations.
This commit adds a configure script check for those defines and will not
attempt to make use of those if they do not exist. We will print a
warning urging the user to upgrade their OpenSSL installation if those
defines are not present.
Change-Id: I6a2eb9a43fd0738b404d8f6f2cf4b5c22d9d752d
This change exposes the configuration of various aspects of the TLS
support and sets the default to the modern standards.
The TLS cipher is now set to the best values according to the
Mozilla OpSec team, different TLS versions can now be disabled, and
the cipher order can be forced to be that of the server instead of
the client.
ASTERISK-24972 #close
Change-Id: I0a10f2883f7559af5e48dee0901251dbf30d45b8
Asterisk by default will create a single database connection and share
it among all threads that attempt to access the database. In previous
versions of Asterisk, this was tolerable, because the most used channel
driver, chan_sip, mostly accessed the database from a single thread.
With PJSIP, however, many threads may be attempting to perform database
operations, and there is the potential for many more database accesses,
meaning the concurrency is a horrible bottleneck if only one connection
is shared.
Asterisk has a connection pooling facility built into it, but the
implementation has flaws. For one, there is a strict limit on the number
of simultaneous connections that could be made to the database. Anything
beyond the maximum would result in a failed operation. Attempting to
predict what the maximum should be is nearly impossible even for someone
intimately familiar with Asterisk's threading model. In addition, use of
transactions in the dialplan can cause some severe bugs if connection
pooling is enabled.
This commit seeks to fix the concurrency problem by removing all
connection management code from Asterisk and leaving that to the
underlying unixODBC code instead. Now, Asterisk does not share a single
connection, nor does it try to maintain a connection pool. Instead, all
Asterisk ever does is request a connection from unixODBC and allow
unixODBC to either allocate those connections or retrieve them from a
pool.
Doing this has a bit of a ripple effect. For one, since connections are
not long-lived objects, several of the safeguards that previously
existed have been removed. We don't have to worry about trying to use a
connection that has gone stale. In every case, when we request a
connection, it has just been made and we don't need to perform any
sanity checks to be sure it's still active.
Another major player affected by this change is transactions.
Transactions and their respective connections were so tightly coupled
that it was almost pornographic. This code change moves
transaction-related code to its own file separate from the core ODBC
functionality. This way, the core of ODBC does not even have to know
that transactions exist.
In making this large change, I had to look at a lot of code and
understand it. When making this change, I discovered several places
where the behavior is definitely not ideal, but it seemed outside the
scope of this change to be fixing it. Instead, any place where I saw
some sort of room for improvement has had a XXX comment added explaining
what could be altered to improve it.
Change-Id: I37a84def5ea4ddf93868ce8105f39de078297fbf
Dump the res_pjsip endpt internals.
In non-developer mode we will not document or make easily accessible the
"details" option even though it is still available. The user has to know
it exists to use it. Presumably they would also be aware of the potential
crash warning below.
Warning: PJPROJECT documents that the function used by this CLI command
may cause a crash when asking for details because it tries to access all
active memory pools.
Change-Id: If2d98a3641c9873364d1daaad971376311aef3cb
res_pjsip_log_forwarder has been renamed to res_pjproject
and enhanced as follows:
As a follow-on to the recent 'Add CLI "pjsip show buildopts"' patch,
a new ast_pjproject_get_buildopt function has been added. It
allows the caller to get the value of one of the buildopts.
The initial use case is retrieving the runtime value of
PJ_MAX_HOSTNAME to insure we don't send a hostname greater
than pjproject can handle. Since it can differ between
the version of pjproject that Asterisk was compiled against
and the version of pjproject that Asterisk is running against,
we can't use the PJ_MAX_HOSTNAME macro directly in Asterisk
source code.
Change-Id: Iab6e82fec3d7cf00c1cf6185c42be3e7569dee1e
The xferfailsound was read from the channel at the beginning of the transfer,
and that value is "cached" for the duration of the transfer. Therefore, changing
the xferfailsound on the channel using the FEATURE() dialplan function does
nothing once the transfer is under way.
This makes it so the transfer code instead gets the xferfailsound configuration
options from the channel when it is actually going to be used.
This patch also fixes a potential memory leak of the props object as well as
making sure the condition variable gets initialized before being destroyed.
ASTERISK-25696 #close
Change-Id: Ic726b0f54ef588bd9c9c67f4b0e4d787934f85e4
Added new global option (regcontext) to pjsip. When set, Asterisk will
dynamically create and destroy a NoOp priority 1 extension
for a given endpoint who registers or unregisters with us.
ASTERISK-25670 #close
Reported-by: Daniel Journo
Change-Id: Ib1530c5b45340625805c057f8ff1fb240a43ea62
* changes:
Sorcery: Create human friendly serializer names.
Stasis: Create human friendly taskprocessor/serializer names.
taskprocessor.c: New API for human friendly taskprocessor names.
taskprocessor.c: Sort CLI "core show taskprocessors" output.
On a system with multiple ip addresses in the same subnet, if a
transport is bound to a specific ip address and endpoint/media_address
is set, the SIP/SDP will have the correct address in all fields but
the rtp stream MAY still originate from one of the other ip addresses,
most probably the "primary" ip address. This happens because
res_pjsip_sdp_rtp/create_rtp always calls ast_instance_new with
the "all" ip address (0.0.0.0 or ::).
The new option causes res_pjsip_sdp_rtp/create_rtp to call
ast_rtp_instance_new with the endpoint's media_address (if specified)
instead of the "all" address. This causes the packets to originate from
the specified address.
ASTERISK-25632
ASTERISK-25637
Reported-by: Olivier Krief
Reported-by: Dan Journo
Change-Id: I3dfaa079e54ba7fb7c4fd1f5f7bd9509bbf8bd88
* Add new API call to get a sequence number for use in human friendly
taskprocessor names.
* Add new API call to create a taskprocessor name in a given buffer and
append a sequence number.
Change-Id: Iac458f05b45232315ed64aa31b1df05b875537a9
Renamed global declaration:tv to dummy_tv_var_for_types,
which would oltherwise cause 'shadow' warnings when 'tv'
was declared as a local variable elsewhere.
Added comment to note that dummy_tv_var_for_types is never
really exported and only used as a place holder.
ASTERISK-25627 #close
Change-Id: I9a6e17995006584f3627efe8988e3f8aa0f5dc28
This is the sixth patch in a series meant to reduce the bulk of pbx.c.
This moves hangup handler management functions to their own source.
Change-Id: Ib25a75aa57fc7d5c4294479e5cc46775912fb104
This is the sixth patch in a series meant to reduce the bulk of pbx.c.
This moves dialplan application management functions to their own source.
Change-Id: I444c10fb90a3cdf9f3047605d6a8aad49c22c44c
This is the fifth patch in a series meant to reduce the bulk of pbx.c.
This moves ast_switch functions to their own source.
Change-Id: Ic2592a18a5c4d8a3c2dcf9786c9a6f650a8c628e
The menuselect conflict between app_voicemail and res_mwi_external
makes it hard to package 1 version of Asterisk. There no actual
build dependencies between the 2 so moving this check to runtime
seems like a better solution.
The ast_vm_register and ast_vm_greeter_register functions in app.c
were modified to return AST_MODULE_LOAD_DECLINE instead of -1 if there
is already a voicemail module registered. The modules' load_module
functions were then modified to return DECLINE instead of -1 to the
loader. Since -1 is interpreted by the loader as AST_MODULE_LOAD_FAILURE,
the modules were incorrectly causing Asterisk to stop so this needed
to be cleaned up anyway.
Now you can build both and use modules.conf to decide which voicemail
implementation to load.
The default menuselect options still build app_voicemail and not
res_mwi_external but if both ARE built, res_mwi_external will load
first and become the voicemail provider unless modules.conf rules
prevent it. This is noted in CHANGES.
Change-Id: I7d98d4e8a3b87b8df9e51c2608f0da6ddfb89247
This is the third patch in a series meant to reduce the bulk of pbx.c.
This moves channel and global variable routines to their own source.
Change-Id: Ibe8fb4647db11598591d443a99e3f99200a56bc6
This is the second patch in a series meant to reduce the bulk of pbx.c.
This moves custom function management routines to their own source.
Change-Id: I34a6190282f781cdbbd3ce9d3adeac3c3805e177
We joked about splitting pbx.c into multiple files but this first step was
fairly easy. All of the pbx_builtin dialplan applications have been moved
into pbx_builtins.c and a new pbx_private.h file was added. load_pbx_builtins()
is called by asterisk.c just after load_pbx().
A few functions were renamed and are cross-exposed between the 2 source files.
Change-Id: I87066be3dbf7f5822942ac1449d98cc43fc7561a
Updated ast_websocket_write to encode the entire frame in to one
write operation, to ensure that we don't end up with a situation
where the websocket header has been sent, while the body can not
be written.
Previous to August's patch in commit b9bd3c14, certain network
conditions could cause the header to be written, and then the
sub-sequent body to fail - which would cause the next successful
write to contain a new header, and a new body (resulting in
the peer receiving two headers - the second of which would be
read as part of the body for the first header).
This was patched to have both write operations individually fail
by closing the websocket.
In a case available to the submitter of this patch, the same
body which would consistently fail to write, would succeed
if written at the same time as the header.
This update merges the two operations in to one, adds debug messages
indicating the reason for a websocket connection being closed during
a write operation, and clarifies some variable names for code legibility.
Change-Id: I4db7a586af1c7a57184c31d3d55bf146f1a40598
When an endpoint is created, its messages are forwarded to both the tech
endpoint topic and the all endpoints topic. This is done so that various
parties interested in endpoint messages can subscribe to just the tech
endpoint and receive all messages associated with that particular technology,
as opposed to subscribing to the all endpoints topic. Unfortunately, when the
tech endpoint is created, it also forwards all of its messages to the all
topic. This results in duplicate messages whenever an endpoint publishes its
messages.
This patch resolves the duplicate message issue by creating a new function
for Stasis caching topics, stasis_cp_sink_create. In most respects, this acts
as a normal caching topic, save that it no longer forwards messages it receives
to the all endpoints topic. This allows it to act as an aggregation "sink",
while preserving the necessary caching behaviour.
ASTERISK-25137 #close
Reported-by: Vitezslav Novy
ASTERISK-25116 #close
Reported-by: George Joseph <george.joseph@fairview5.com>
Tested-by: George Joseph <george.joseph@fairview5.com>
Change-Id: Ie47784adfb973ab0063e59fc18f390d7dd26d17b
pjproject < 2.5.0 will segfault on a tls transport if async_operations
is greater than 1. A runtime version check has been added to throw
an error if the version is < 2.5.0 and async_operations > 1.
To assist in the check, a new api "ast_compare_versions" was added
to utils which compares 2 major.minor.patch.extra version strings.
ASTERISK-25615 #close
Change-Id: I8e88bb49cbcfbca88d9de705496d6f6a8c938a98
Reported-by: George Joseph
Tested-by: George Joseph
Both transport and endpoint now check for the existence and readability
of tls certificate and key files before passing them on to pjproject.
This will cause the object to not load rather than waiting for pjproject
to discover that there's a problem when a session is attempted.
NOTE: chan_sip also uses ast_rtp_dtls_cfg_parse but it's located
in build_peer which is gigantic and I didn't want to disturb it.
Error messages will emit but it won't interrupt chan_sip loading.
ASTERISK-25618 #close
Change-Id: Ie43f2c1d653ac1fda6a6f6faecb7c2ebadaf47c9
Reported-by: George Joseph
Tested-by: George Joseph
An earlier commit changed the id of dynamic contacts to contain
a hash instead of the uri. This patch updates status change
logging to show the aor/uri instead of the id. This required
adding the aor id to contact and contact_status and adding
uri to contact_status. The aor id gets added to contact and
contact_status in their allocators and the uri gets added to
contact_status in pjsip_options when the contact_status is
created or updated.
ASTERISK-25598 #close
Reported-by: George Joseph
Tested-by: George Joseph
Change-Id: I56cbec1d2ddbe8461367dd8b6da8a6f47f6fe511
Currently if a channel is transferred out of a bridge, the BRIDGEPEER
variable (also BRIDGEPVTCALLID) remain set even once the channel is
out of the bridge. This patch removes these variables when leaving
the bridge.
ASTERISK-25600 #close
Reported by: Mark Michelson
Change-Id: I753ead2fffbfc65427ed4e9244c7066610e546da
Several issues are addressed here:
- main() is large, and half of it is only used if we're not rasterisk;
fixed by spliting up the daemon part into a separate function.
- Call ast_term_init from rasterisk as well.
- Remove duplicate code reading/writing asterisk history file.
- Attempt to tackle background color issues and color changes that
occur. Tested by starting asterisk -c until the colors stopped
changing at odd locations.
- Remove unused term_prep() and term_prompt() functions.
ASTERISK-25585 #close
Change-Id: Ib641a0964c59ef9fe6f59efa8ccb481a9580c52f
Often, the metric names of statistics we are generating for StatsD have some
dynamic component to them. This can be the name of a particular resource, or
some internal status label in Asterisk. With the current set of functions,
callers of the statsd API must first build the metric name themselves, then
pass this to the API functions. This results in a large amount of boilerplate
code and usage of either fixed length static buffers or dynamic memory
allocation, neither of which is desireable.
This patch adds two new functions to the StatsD API that support a printf
style format specifier for constructing the metric name. A dynamic string,
allocated in threadstorage, is used to build the metric name. This eases
the burden on users of the StatsD API.
Change-Id: If533c72d1afa26d807508ea48b4d8c7b32f414ea
Previously, a trancoding module did not have access to the joint but cached
format. Therefore, the module did not have access to the attributes negotiated
via SDP (line fmtp). Now, a translation module receives the joint format.
ASTERISK-25545 #close
Change-Id: Id6878a989b50573298dab115d3371ea369e1a718
In practical tests, we have seen certain taskprocessors, specifically
Stasis subscription taskprocessors, cross the recently-added high-water
mark and emit a warning. This high-water mark warning is only intended
to be emitted when things have tanked on the system and things are
heading south quickly. In the practical tests, the Stasis taskprocessors
sometimes had a max depth of 180 tasks in them, and Asterisk wasn't in
any danger at all.
As such, this ups the high-water mark to 500 tasks instead. It also
redefines the SIP threadpool request denial number to be a multiple of
the taskprocessor high-water mark.
Change-Id: Ic8d3e9497452fecd768ac427bb6f58aa616eebce
We have observed situations where the SIP threadpool may become
deadlocked. However, because incoming traffic is still arriving, the SIP
threadpool's queue can continue to grow, eventually running the system
out of memory.
This change makes it so that incoming traffic gets rejected with a 503
response if the queue is backed up too much.
Change-Id: I4e736d48a2ba79fd1f8056c0dcd330e38e6a3816
This increases the maximum length of account code's to match
extensions. This ensures it is always possible to set an
accountcode to ${EXTEN} without truncation.
ASTERISK-23904
Reported by: Ben Merrills
Change-Id: If122602304ce03362722eb213a3111b32da5eeb9
Added a new api to res_statsd.c to allow it to receive a
character pointer for the value argument. This allows for a
'+' and a '-' to easily be sent with the value.
ASTERISK-25419
Reported By: Ashley Sanders
Change-Id: Id6bb53600943d27347d2bcae26c0bd5643567611
A previous commit reduced the AST_BUILDOPTS compiler define to
only include options that affected ABI. This included some options
that were previously displayed by cli "core show settings". This
change corrects the CLI display while still restricting buildopts.h
to ABI effecting options only.
ASTERISK-25434 #close
Reported by: Rusty Newton
Change-Id: Id07af6bedd1d7d325878023e403fbd9d3607e325
Add the ability to filter output from pjsip list and show commands
using the "like" predicate like chan_sip.
For endpoints, aors, auths, registrations, identifyies and transports,
the modification was a simple change of an ast_sorcery_retrieve_by_fields
call to ast_sorcery_retrieve_by_regex. For channels and contacts a
little more work had to be done because neither of those objects are
true sorcery objects. That was just removing the non-matching object
from the final container. Of course, a little extra plumbing in the
common pjsip_cli code was needed to parse the "like" and pass the regex
to the get_container callbacks.
Some of the get_container code in res_pjsip_endpoint_identifier was also
refactored for simplicity.
ASTERISK-25477 #close
Reported by: Bryant Zimmerman
Tested by: George Joseph
Change-Id: I646d9326b778aac26bb3e2bcd7fa1346d24434f1
There have been crashes and general instability seen in the pubsub code,
so this patch introduces three changes to increase the stability.
First, the ownership model for subscriptions has been modified. Due to
RLS, subscriptions are stored in memory as a tree structure. Prior to my
patch, the PJSIP subscription was the owner of the subscription tree.
When the PJSIP subscription told us that it was terminating, we started
destroying the subscription tree along with all of the individual leaf
subscriptions that belong to the tree. The problem with this model is
that the two actors in play here, the PJSIP subscription and the
individual leaf subscriptions, need to have joint ownership of the
subscription tree. So now, the PJSIP subscription and the individual
leaf subscriptions each have a reference to the subscription tree. This
way, we will not actually free memory until no players are left that
care. The PJSIP subscription is a bigger stakeholder, in that if the
PJSIP subscription's reference to the subscription tree is removed, the
subscription tree instructs the leaf subscriptions to shut down and drop
their references to the subscription tree when possible. The individual
leaf subscriptions, upon being told to shut down, can drop their stasis
subscriptions or whatever they use to learn of new state, and then drop
their reference to the subscription tree once they are ready to die.
Second, the lifetime of a PJSIP subscription's reference to our
subscription tree has been altered. As I learned from doing a deep dive,
the PJSIP evsub code can tell Asterisk multiple times that the
subscription has been terminated, and not all of these times
are especially helpful. I have altered the message flow that we use for
SIP subscriptions such that we will always drop the PJSIP subscription's
reference to the subscription tree when we send the NOTIFY that
terminates a SIP subscription. This also means that we will now queue
NOTIFY requests to be sent after responding to incoming SUBSCRIBEs so
that we can have predictable state changes from the PJSIP evsub code.
Third, the synchronization of operations has been improved. PJSIP can
call into our code from a serializer thread (e.g. upon receiving an
incoming request) or from the monitor thread (e.g. when a subscription
times out). Because of this, there is the possibility of competing
threads stepping on each other. PJSIP attempts to do some
synchronization on its own by always keeping the dialog lock held when
it calls into us. However, since we end up pushing tasks into the
serializer, the result was that serialized operations were not grabbing
the dialog lock and could, as a result, step on something that was being
attempted by a different thread. Now we ensure that serialized
operations grab the dialog lock, then check for extenuating
circumstances, then proceed with their operation if they can.
Change-Id: Iff2990c40178dad9cc5f6a5c7f76932ec644b2e5
In a realtime based system with a limited number of threadpool threads
it is possible for a deadlock to occur. This happens when permanent
endpoint state is updated, which will cause database queries to be done.
These queries may result in URI validation being done which is done
synchronously using a PJSIP thread. If all PJSIP threads are in use
processing traffic they themselves may be blocked waiting to get the
permanent endpoint container lock when identifying an endpoint.
This change moves URI validation to occur at use time instead of
configuration time. While this comes at a cost of not seeing a problem
until you use it it does solve the underlying deadlock problem.
ASTERISK-25486 #close
Change-Id: I2d7d167af987d23b3e8199e4a68f3359eba4c76a
This patch adds the functions
ast_cdr_modifier_register()
ast_cdr_modifier_unregister()
That work much like ast_cdr_register() and ast_cdr_unregister().
Modules registered will be given a chance to modify (or to do whatever
they want) CDR fields just before they are passed to registered engines.
Thus, for instance, if a module change the "userfield" field of a CDR,
the modified value will be passed to every registered CDR backend for
logging.
ASTERISK-25479 #close
Change-Id: If11d8fd19ef89b1a66ecacf1201e10fcf86ccd56
This patch adds the ability to subscribe to all events. There are two possible
ways to accomplish this:
(1) On initial WebSocket connection. This patch adds a new query parameter,
'subscribeAll'. If present and True, Asterisk will subscribe the
applications to all ARI events.
(2) Via the applications resource. When subscribing in this manner, an ARI
client should merely specify a blank resource name, i.e., 'channels:'
instead of 'channels:12354'. This will subscribe the application to all
resources of the 'channels' type.
ASTERISK-24870 #close
Change-Id: I4a943b4db24442cf28bc64b24bfd541249790ad6
The default_from_user retrieval function was pulling the
default_from_user from the global configuration struct in an unsafe way.
If using a database as a backend configuration store, the global
configuration struct is short-lived, so grabbing a pointer from it
results in referencing freed memory.
The fix here is to copy the default_from_user value out of the global
configuration struct.
Thanks go to John Hardin for discovering this problem and proposing the
patch on which this fix is based.
ASTERISK-25390 #close
Reported by Mark Michelson
Change-Id: I6b96067a495c1259da768f4012d44e03e7c6148c
When Asterisk sends an outbound SIP request, if there is no direct
reason to place a specific value for the username in the From header,
Asterisk would generate a UUID. For example, this would happen when
sending outbound OPTIONS requests when qualifying or when sending
outbound INVITE requests when originating (if no explicit caller ID were
provided). The issue is that some SIP providers reject these sorts of
requests with a "Name too long" error response.
This patch aims to fix this by changing the default outbound username in
From headers to "asterisk". This value can be overridden by changing the
default_from_user option in the global options if desired.
ASTERISK-25377 #close
Reported by Mark Michelson
Change-Id: I6a4d34a56ff73ff4f661b0075aeba5461b7f3190
The keepalive support in res_pjsip_sdp_rtp currently assumes
that a stream will only be negotiated once. This is false.
If the stream is replaced and later added back it can be
negotiated again causing multiple keepalive scheduled items
to exist. This change explicitly deletes the existing
keepalive scheduled item before adding the new one.
The res_pjsip_sdp_rtp module also does not stop RTP
keepalives or timeout timer if the stream has been
replaced. This change adds a callback to the session media
interface to allow a media stream to be stopped without
the resources being destroyed. This allows the scheduled
items and RTP to be stopped when the stream no longer
exists.
ASTERISK-25356 #close
Change-Id: Ibe6a7cc0927c87326fd5f1c0d4ad889dbfbea1de
Modules commonly used the pj_gethostip function for retrieving the
IP address of the host. This function does not cache the result and may
result in a DNS lookup occurring, or additional work. If the DNS
server is unreachable or network issues arise this can cause the
pj_gethostip function to block for a period of time.
This change adds an ast_sip_get_host_ip and ast_sip_get_host_ip_string
function which does the same thing but caches the host IP address at
module load time. This results in no additional work being done each
time the local host IP address is needed.
ASTERISK-25342 #close
Change-Id: I3205deb679b01fa5ac05a94b623bfd620a2abe1e
* Make ast_rtp_codecs_payload_code() get the current mapping or create a
rx payload type mapping.
ASTERISK-25166
Reported by: Kevin Harwell
ASTERISK-17410
Reported by: Boris Fox
Change-Id: Ia4b2d45877a8f004f6ce3840e3d8afe533384e56
There are numerous problems with the current implementation of the RTP
payload type mapping in Asterisk. It uses only one mapping structure to
associate payload types to codecs. The single mapping is overkill if all
of the payload type values are well known values. Dynamic payload type
mappings do not work as well with the single mapping because RFC3264
allows each side of the link to negotiate different dynamic mappings for
what they want to receive. Not only could you have the same codec mapped
for sending and receiving on different payload types you could wind up
with the same payload type mapped to different codecs for each direction.
1) An independent payload type mapping is needed for sending and
receiving.
2) The receive mapping needs to keep track of previous mappings because of
the slack to when negotiation happens and current packets in flight using
the old mapping arrive.
3) The transmit mapping only needs to keep track of the current negotiated
values since we are sending the packets and know when the switchover takes
place.
* Needed to create ast_rtp_codecs_payload_code_tx() and make some callers
use the new function because ast_rtp_codecs_payload_code() was used for
mappings in both directions.
* Needed to create ast_rtp_codecs_payloads_xover() for cases where we need
to pass preferred codec mappings to the peer channel for early media
bridging or when we need to prefer the offered mapping that RFC3264 says
we SHOULD use.
* ast_rtp_codecs_payloads_xover() and ast_rtp_codecs_payload_code_tx() are
the only new public functions created. All the others were only used for
the tx or rx mapping direction so the function doxygen now reflects which
direction the function operates.
* chan_mgcp.c: Removed call to ast_rtp_codecs_payloads_clear() as doing
that makes no sense when processing an incoming SDP. We would be wiping
out any mappings that we set for the possible outgoing SDP we sent
earlier.
ASTERISK-25166
Reported by: Kevin Harwell
ASTERISK-17410
Reported by: Boris Fox
Change-Id: Iaf6c227bca68cb7c414cf2fd4108a8ac98bd45ac
Some codecs that may be a third party library to Asterisk need to have
knowledge of the format attributes that were negotiated. Unfortunately,
when the great format migration of Asterisk 13 occurred, that ability
was lost.
This patch adds an API call, ast_format_attribute_get, to the core
format API, along with updates to the unit test to check the new API
call. A new callback is also now available for format attribute modules,
such that they can provide the format attribute values they manage.
Note that the API returns a void *. This is done as the format attribute
modules themselves may store format attributes in any particular manner
they like. Care should be taken by consumers of the API to check the
return value before casting and dereferencing. Consumers will obviously
need to have a priori knowledge of the type of the format attribute as
well.
Change-Id: Ieec76883dfb46ecd7aff3dc81a52c81f4dc1b9e3
clock_gettime() is, unfortunately, not portable. But I did like that
over our usual `ts.tv_nsec = tv.tv_usec * 1000` copy/paste code we
usually do when we want a timespec and all we have is ast_tvnow().
This patch adds ast_tsnow(), which mimics ast_tvnow(), but returns a
timespec. If clock_gettime() is available, it will use that. Otherwise
ast_tsnow() falls back to using ast_tvnow().
Change-Id: Ibb1ee67ccf4826b9b76d5a5eb62e90b29b6c456e
An http request can be sent to get the existing Asterisk logs.
The command "curl -v -u user:pass -X GET 'http://localhost:8088
/ari/asterisk/logging'" can be run in the terminal to access the
newly implemented functionality.
* Retrieve all existing log channels
ASTERISK-25252
Change-Id: I7bb08b93e3b938c991f3f56cc5d188654768a808
An http request can be sent to create a log channel
in Asterisk.
The command "curl -v -u user:pass -X POST
'http://localhost:088/ari/asterisk/logging/mylog?
configuration=notice,warning'" can be run in the terminal
to access the newly implemented functionality for ARI.
* Ability to create log channels using ARI
ASTERISK-25252
Change-Id: I9a20e5c75716dfbb6b62fd3474faf55be20bd782
An http request can be sent to delete a log channel
in Asterisk.
The command "curl -v -u user:pass -X DELETE 'http://localhost:8088
/ari/asterisk/logging/mylog'" can be run in the terminal
to access the newly implemented functionally for ARI.
* Able to delete log channels using ARI
ASTERISK-25252
Change-Id: Id6eeb54ebcc511595f0418d586ff55914bc3aae6
An http request can be sent to rotate a specified log channel.
If the channel does not exist, an error response will be
returned.
The command "curl -v -u user:pass -X PUT 'http://localhost:8088
/ari/asterisk/logging/logChannelName/rotate'" can be run in the
terminal to access this new functionality.
* Added the ability to rotate log files through ARI
ASTERISK-25252
Change-Id: Iaefa21cbbc1b29effb33004ee3d89c977e76ab01
Prior to ASTERISK-24988, the WebSocket handshake was resolved before Stasis
applications were registered. This was done such that the WebSocket would be
ready when an application is registered. However, by creating the WebSocket
first, the client had the ability to make requests for the Stasis application
it thought had been created with the initial handshake request. The inevitable
conclusion of this scenario was the cart being put before the horse.
ASTERISK-24988 resolved half of the problem by ensuring that the applications
were created and registered with Stasis prior to completing the handshake
with the client. While this meant that Stasis was ready when the client
received the green-light from Asterisk, it also meant that the WebSocket was
not yet ready for Stasis to dispatch messages.
This patch introduces a message queuing mechanism for delaying messages from
Stasis applications while the WebSocket is being constructed. When the ARI
event processor receives the message from the WebSocket that it is being
created, the event processor instantiates an event session which contains a
message queue. It then tries to create and register the requested applications
with Stasis. Messages that are dispatched from Stasis between this point and
the point at which the event processor is notified the WebSocket is ready, are
stashed in the queue. Once the WebSocket has been built, the queue's messages
are dispatched in the order in which they were originally received and the
queue is concurrently cleared.
ASTERISK-25181 #close
Reported By: Matt Jordan
Change-Id: Iafef7b85a2e0bf78c114db4c87ffc3d16d671a17
A testsuite test recently failed due to a crash that occurred in the DNS
core. The problem was that the test could not resolve an address, did
not set a result on the DNS query, and then indicated the query was
completed. The DNS core does not handle the case of a query with no
result gracefully, and so there is a crash.
This changeset makes the DNS system resolver set a result with a
zero-length answer in the case that a DNS resolution failure occurs
early. The DNS core now also will accept such a response without
treating it as invalid input. A unit test was updated to no longer treat
setting a zero-length response as off-nominal.
Change-Id: Ie56641e22debdaa61459e1c9a042e23b78affbf6
Matt Jordan
Alexei Gradinari
Joshua Colp
George Joseph
zuul
Richard Mudgett
George Joseph
Mark Michelson
Jacek Konieczny
Walter Doekes
Rodrigo Ramírez Norambuena
Kevin Harwell
Corey Farrell
Daniel Journo
Diederik de Groot
Dade Brandon
Jonathan Rose
Alexander Traud
David M. Lee
tcambron
Jonh Wendell
Scott Emidy
Benjamin Ford
Ashley Sanders