chan_sip allows for outbound TLS connections, but does not allow the user to specify what protocol to use (default was SSLv2, and still is if this new option is not specified). This patch lets the user pick the SSL/TLS client method for outbound connections in sip.
(closes issue #14770)
Reported by: TheOldSaint
(closes issue #14768)
Reported by: TheOldSaint
Review: http://reviewboard.digium.com/r/240/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@191177 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ast_tls_read_conf() is a new api call for handling SSL/TLS options across all conf files. Before this change, SSL/TLS options were not consistent. http.conf and manager.conf required the 'ssl' prefix while sip.conf used options with the 'tls' prefix. While the options had different names in different conf files, they all did the exact same thing. Now, instead of mixing 'ssl' or 'tls' prefixes to do the same thing depending on what conf file you're in, all SSL/TLS options use the 'tls' prefix. For example. 'sslenable' in http.conf and manager.conf is now 'tlsenable' which matches what already existed in sip.conf. Since this has the potential to break backwards compatibility, previous options containing the 'ssl' prefix still work, but they are no longer documented in the sample.conf files. The change is noted in the CHANGES file though.
Review: http://reviewboard.digium.com/r/237/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@191028 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Adds option to specify a private key .pem file when configuring TLS or SSL in AMI, HTTP, and SIP. Before this, the certificate file was used for both the public and private key. It is possible for this file to hold both, but most configurations allow for a separate private key file to be specified. Clarified in .conf files how these options are to be used. The current conf files do not explain how the private key is handled at all, so without knowledge of Asterisk's TLS implementation, it would be hard to know for sure what was going on or how to set it up.
Review: http://reviewboard.digium.com/r/234/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@190545 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is the companion commit to libpri r732. Service messages are now supported
for switch types 4ess/5ess. A new option service_message_support has been added
to chan_dahdi.conf and is noted in the sample config file. The service message
support is turned off by default. The current implementation relies on AstDB
to keep track of channel state, which allows the statuses to be preserved
across Asterisk restarts. Below is a description of the storage format.
The state and reason for the service state are in the form <state>:<reason>,
where:
<state> ::= { 'O' } // 'O' – Out Of Service
<reason> ::= { '0' | '1' | '2' | '3' }, where:
'0' – No reason (backwards compatibility)
'1' – NEAR END
'2' – FAR END
'3' – both NEAR and FAR END
The new CLI commands to handle channel service state are:
pri service disable channel <chan>
pri service enable channel <chan>
Many people contributed to the development of this functionality. Because I
entered at the very end I do not know the exact history. Special thanks to
all who moved the bug forward one way or another:
cmaj, PCadach, markster, mattf, drmac, MikeJ, serge-v, murf, kanelbullar, Seb7,
tilghman, lmadsen, and especially dhubbard (he answered lots of my questions
and did a large portion of the work)
(closes issue #3450)
Reported by: cmaj
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@188342 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This allows for you to change the From header for outgoing MWI
NOTIFY requests. Prior to this, the best you could do was to
set a callerid in the general section of sip.conf. The problem
was that this was used for all outbound requests, not just
MWI NOTIFY requests.
AST-201
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@187560 65c4cc65-6c06-0410-ace0-fbb531ad65f3
(inspired by this evening's Toronto Asterisk Users Group meeting and previous dicussions amongst various community members)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@187269 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The channel drivers which have been most heavily tested with these enhancements are
chan_sip and chan_misdn. Further work is being done to add Q.SIG support and will be
introduced in a later commit. chan_skinny has code added to it here, but according
to user pj, the support on chan_skinny is not working as of now. This will be fixed in
a later commit.
A special thanks goes out to bugtracker user gareth for getting the ball rolling and
providing the initial support for this work. Without his initial work on this, this would
not have been nearly as painless as it was.
This functionality has been tested by Digium's product quality department, as well as a
customer site running thousands of calls every day. In addition, many many many many bugtracker
users have tested this, too.
(closes issue #8824)
Reported by: gareth
Review: http://reviewboard.digium.com/r/201
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@186525 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This API provides a generic way for multiple RTP stacks to be
integrated into Asterisk. Right now there is only one present, res_rtp_asterisk,
which is the existing Asterisk RTP stack. Functionality wise this commit
performs the same as previously. API documentation can be viewed in the
rtp_engine.h header file.
Review: http://reviewboard.digium.com/r/209/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@186078 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit introduces official support for R2 signaling in chan_dahdi. The
modifications to chan_dahdi, and the supporting library, LibOpenR2, were both
written by Moises Silva.
Many users are using this code, or a variant of it, in Asterisk 1.2, 1.4 and 1.6
in Brazil, México and Argentina. An unknown number of users (but at least 1)
are using it in each of the following countries: Colombia, Nepal, Thailand,
Venezuela, Perú, and probably others.
To use this code, LibOpenR2 must be installed from http://www.libopenr2.org/.
Information about configuration can be found in configs/chan_dahdi.conf.sample.
The code committed is the most up to date version, which was being maintained
in svn/asterisk/team/moy/mfcr2/.
I would also like to include a Thank You to the many others that tested this
code beyond those listed in this commit message. These are the names that I
could find in the mantis issue.
(closes issue #12509)
Reported by: moy
Patches:
chan_zap-mfr2.patch uploaded by moy (license 222)
Tested by: moy, korihor, viniciusfontes, Skarmeth, loloski, asbestoshead, titogarrido, heliocoelhojr, konsultex, ncorrare, ecarruda, rtorresduque, PTorres, ychen
Review: http://reviewboard.digium.com/r/40/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@182355 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r180380 | mmichelson | 2009-03-05 12:58:48 -0600 (Thu, 05 Mar 2009) | 25 lines
Fix broken mailbox parsing when searchcontexts option is enabled.
When using the searchcontexts option in voicemail.conf, the code
made the assumption that all mailbox names defined were unique across
all contexts. However, the code did nothing to actually enforce this
assumption, nor did it do anything to alert a user that he may have
created an ambiguity in his voicemail.conf file by defining the same
mailbox name in multiple contexts.
With this change, we now will issue a nice long warning if searchcontexts
is on and we encounter the same mailbox name in multiple contexts and ignore
any duplicates after the first box. Whether searchcontexts is enabled or not,
if we come across a duplicate mailbox in the same context, then we will issue
a warning and ignore the duplicated mailbox. I have also added a small note
to voicemail.conf.sample in the explanation for searchcontexts explaining
that you cannot define the same mailbox in multiple contexts if you have
enabled the option.
(closes issue #14599)
Reported by: lmadsen
Patches:
14599.patch uploaded by mmichelson (license 60) (with slight modification)
Tested by: lmadsen
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@180383 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When the subscription context for a call pickup subscription differs
from the context of the call pickup target, there's not an easy way
to divine what context should be used for the pickup. The way to work
around this is to use PICKUPMARK as the context for the pickup.
This has been documented in the sip.conf.sample file
(ABE-1708)
closes issue #14567
submitted by: alecdavis
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@180155 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r180006 | mmichelson | 2009-03-03 16:48:18 -0600 (Tue, 03 Mar 2009) | 17 lines
Clarify some documentation of queues.conf.sample
It had always been possible to explicitly specify a "blank"
value for a sound file in queues.conf and have no sound played
back. The problem with this is that it would result in some ugly
CLI warnings from file.c.
This commit introduces a check when playing a file in app_queue
to see if the name of the file is zero-length and return early if
that is the case. Also, the ability to specify the blank sound
files in queues.conf is now mentioned more clearly in queues.conf.sample
(closes issue #14227)
Reported by: caspy
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@180007 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
In this case, it's just a matter of reducing the default timeouts from 2000
to 1000 msec, as the max def feature digit timeout is no longer halved.
........
r178956 | murf | 2009-02-26 14:27:32 -0700 (Thu, 26 Feb 2009) | 18 lines
This change moves the default feature digit timeout to 1000 ms from the previous default of 500.
As per bug 14515, a dev discussion arrived at a "mediated concensus"
of a default feature digit timeout of 1.0 sec. Some voted for 1300;
ctooley thought 1500 for distracted phone users in phone booths;
kpfleming put his foot down at 1.0 sec.
Users who found the previous default max delay of 250 msec perfect,
are welcome to override the new default. Notice that I said that
250 msec was the default; wait a minute, you might say, the config
file said it was 500 msec!; well, because of the bug fix for 14515,
we found that 500 msec was actually enforcing a max of 250. The bug
fix would restore 500 msec, but we felt even that was a bit tight
for most users... 2000 msec was pushed earlier by mmichelson, so
that reduces to 1000 msec after the bug fix. Enjoy!
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@178986 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch includes a number of changes to the indications API. The primary
motivation for this work was to improve stability. The object management
in this API was significantly flawed, and a number of trivial situations could
cause crashes.
The changes included are:
1) Remove the module res_indications. This included the critical functionality
that actually loaded the indications configuration. I have seen many people
have Asterisk problems because they accidentally did not have an
indications.conf present and loaded. Now, this code is in the core,
and Asterisk will fail to start without indications configuration.
There was one part of res_indications, the dialplan applications, which did
belong in a module, and have been moved to a new module, app_playtones.
2) Object management has been significantly changed. Tone zones are now
managed using astobj2, and it is no longer possible to crash Asterisk by
issuing a reload that destroys tone zones while they are in use.
3) The API documentation has been filled out.
4) The API has been updated to follow our naming conventions.
5) Various bits of code throughout the tree have been updated to account
for the API update.
6) Configuration parsing has been mostly re-written.
7) "Code cleanup"
The code is from svn/asterisk/team/russell/indications/.
Review: http://reviewboard.digium.com/r/149/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@176627 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Turns key rotation back on by default. Added bit into encryption IE to indicate whether or not key rotation is supported or not. If it is not supported then it is not enabled, which insures backwards compatibility. This eliminates the need for the keyrotate option in iax.conf, so it has been removed.
Review: http://reviewboard.digium.com/r/159/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@175597 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When the 'faxdetect' configuration option is used, one may also want to use
the 'faxbuffers' configuration option in chan_dahdi.conf. This option will
dynamically use the configured 'faxbuffers' buffer policy on a channel for
the life of the call following the detection of fax tones. The faxbuffers
buffer policy will be reverted during call teardown.
An example use of 'faxbuffers' is below. This example would switch to using
6 buffers with a full buffer policy.
faxbuffers=>6,full
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@175411 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds forceencryption=yes as an iax.conf option. When force encryption is enabled, no unencrypted connections are allowed. This insures all connections are encrypted. This is a new feature, so CHANGES and iax.conf.sample are updated as well.
(closes issue #13285)
Reported by: sgofferj
Tested by: russell
Review: http://reviewboard.digium.com/r/150/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@175344 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is very similar to the DAHDI immediate=yes option. When the phone is picked up, instead of giving a dialtone it connects directly to the "s" extension. Changes where implemented in chan_iax2.c to directly connect to the "s" extension in the appropriate context when this option is enabled. Examples explaining its use are added to iax2.conf.sample. CHANGES has been updated as well.
(closes issue #14266)
Reported by: jcovert
Patches:
chan_iax2.c.patch-trunk uploaded by jcovert (license 551)
iax.conf.sample.patch uploaded by jcovert (license 551)
Tested by: jcovert, dvossel
Review: http://reviewboard.digium.com/r/143/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@174046 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In trunk, the only necessary change pointed out was that the call
to ChanIsAvail uses an option that has been removed.
For the 1.6.1 branch, however, it appears that the sample file is
badly in need of updating since there are |'s used all over the place
there. My tentative plan is just to copy trunk's sample config file
to those branches since the info there is most up-to-date and should
be correct for use in 1.6.1
Thanks to macli in #asterisk-dev for bringing this up
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@173776 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r172517 | twilson | 2009-01-30 11:47:41 -0600 (Fri, 30 Jan 2009) | 37 lines
Fix feature inheritance with builtin features
When using builtin features like parking and transfers, the AST_FEATURE_* flags
would not be set correctly for all instances when either performing a builtin
attended transfer, or parking a call and getting the timeout callback. Also,
there was no way on a per-call basis to specify what features someone should
have on picking up a parked call (since that doesn't involve the Dial() command).
There was a global option for setting whether or not all users who pickup a
parked call should have AST_FEATURE_REDIRECT set, but nothing for DISCONNECT,
AUTOMON, or PARKCALL.
This patch:
1) adds the BRIDGE_FEATURES dialplan variable which can be set either in the
dialplan or with setvar in channels that support it. This variable can be set
to any combination of 't', 'k', 'w', and 'h' (case insensitive matching of the
equivalent dial options), to set what features should be activated on this
channel. The patch moves the setting of the features datastores into the
bridging code instead of app_dial to help facilitate this.
2) adds global options parkedcallparking, parkedcallhangup, and
parkedcallrecording to be similar to the parkedcalltransfers option for
globally setting features.
3) has builtin_atxfer call builtin_parkcall if being transfered to the parking
extension since tracking everything through multiple masquerades, etc. is
difficult and error-prone
4) attempts to fix all cases of return calls from parking and completed builtin
transfers not having the correct permissions
(closes issue #14274)
Reported by: aragon
Patches:
fix_feature_inheritence.diff.txt uploaded by otherwiseguy (license 396)
Tested by: aragon, otherwiseguy
Review http://reviewboard.digium.com/r/138/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@172580 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Added doxygen comments to the major dahdi structures.
* Fixed PRI and SS7 using an incorrect string value if the extension
delimiter is not present in the Dial() function.
* Fixed SS7 not checking if the dialed extension is at least as long
as the stripmsd option.
* Fixed PRI not handling unknown TON/NPI prefix letters correctly.
* Fixed some uninitialized string variables on FXS ports.
configs/chan_dahdi.conf.sample
* Updated some documentation.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@172400 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This prevents the situation when MWI messages are added to caller ID spills causing the channel to be hung up
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@169153 65c4cc65-6c06-0410-ace0-fbb531ad65f3
With this commit, a register => line in sip.conf may contain a port number in the
"user" section of the line. Please see CHANGES and sip.conf.sample for more
details regarding this.
(closes issue #14198)
Reported by: Nick_Lewis
Patches:
chan_sip.c-domainport2.patch uploaded by Nick (license 657)
Tested by: Nick_Lewis
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@168575 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Update the queues.conf.sample documentation to mention that you need to preload chan_local.so as well if you plan on using Local channels for queue members, and you're preloading pbx_config.so.
(closes issue #14179)
Reported by: CrashHD
Tested by: CrashHD
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@167477 65c4cc65-6c06-0410-ace0-fbb531ad65f3
enabled (either globally or for a specific peer), chan_sip will treat any SDP
data it receives as new data and update the media stream accordingly. By
default, Asterisk will only modify the media stream if the SDP session version
received is different from the current SDP session version. This option is
required to interoperate with devices that have non-standard SDP session
version implementations (observed by toc on the bug tracker with Microsoft OCS
which always uses 0 as the session version).
http://reviewboard.digium.com/r/94/
(closes issue #13958)
Reported by: toc
Tested by: toc
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@165180 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Terry Wilson created the original patch for this functionality, which I slightly modified and added
the faxdetect=yes|no configuration option. This patch is only for T38 fax detection and does not
do anything for G711 over SIP fax detection. By default, this option is disabled.
Reviewboard: http://reviewboard.digium.com/r/69/
This functionality is for issue AST-140.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@161115 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Based on cli_permissions.conf configuration file, we are able to permit or deny
cli commands based on some patterns and the local user and group running rasterisk.
(Sorry if I missed some of the testers).
Reviewboard: http://reviewboard.digium.com/r/11/
(closes issue #11123)
Reported by: eliel
Tested by: eliel, IgorG, Laureano, otherwiseguy, mvanbaak
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@160062 65c4cc65-6c06-0410-ace0-fbb531ad65f3
is only found if it dialed the extension that was subscribed to. You can now
specify 'ignore-context' for the 'notifycid' option in sip.conf which will, as
it's value implies, ignore the current context of the caller when doing the
lookup.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@158756 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Add CLI aliases module to asterisk.
- Remove all deprecated CLI commands from the code
Initial work done by file.
Junk-Y and lmadsen did a lot of work and testing to
get the list of deprecated commands into the configuration file.
Deprecated CLI commands are now handled by this new module,
see cli_aliases.conf for more info about that.
ok russellb@ via reviewboard
(closes issue #13735)
Reported by: mvanbaak
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@156120 65c4cc65-6c06-0410-ace0-fbb531ad65f3
lying about what's possible. The tz cannot be set in a
context like this. It can only be set in the general
section or per-mailbox.
Thanks to sasargen on #asterisk-dev for pointing this out
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@155360 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r155011 | mmichelson | 2008-11-06 13:45:52 -0600 (Thu, 06 Nov 2008) | 8 lines
The documentation listed the ability to set 'maxmsg' per
context. The truth is that you can only set this in the general section
or per mailbox. Thus I am updating the sample config file to be more
accurate.
Thanks to sasargen on IRC for bringing up this issue.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@155012 65c4cc65-6c06-0410-ace0-fbb531ad65f3
the calling party when subscribed to the state of an extension that is ringing.
This has some limitations which are documented in sip.conf.sample.
(closes issue #13827)
Reported by: seanbright
Patches:
issue13827.patch uploaded by seanbright (license 71)
Reviewed by: russellb
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@154187 65c4cc65-6c06-0410-ace0-fbb531ad65f3
remotesecret => our password for a remote service
secret => our authentication when someone calls us
Secret => still has both functions if remotesecret is not used.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@153904 65c4cc65-6c06-0410-ace0-fbb531ad65f3
the low default value of featuredigittimeout, I decided it
was high time to change it. I have changed the default to
2000 ms based on a suggestion from Leif Madsen.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@152807 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r152538 | murf | 2008-10-28 23:19:04 -0600 (Tue, 28 Oct 2008) | 14 lines
A little documentation cross-ref between features and
dial and queue... I wasted some time (stupidly) trying
to get the one-touch parking stuff working, because it
didn't occur to me that I had to also have the corresponding
options in the dial command! Duh! (In all this time, I never
set this up before!)
So, to keep some poor fool from suffering the same fate,
I made the features.conf.sample file mention the corresponding
opts in dial/queue; and the docs for dial/app specifically
mention the corresponding decls in the feature.conf file.
I hope this doesn't spoil some vast, eternal plan...
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@152605 65c4cc65-6c06-0410-ace0-fbb531ad65f3
and "leavewhenempty" options are configured in queues.conf.
Instead of using vague terms like "yes," "no," "loose," and
"strict," we now accept a comma-separated list of values
to determine when to consider a member available.
Extended details can be found in the queues.conf.sample
file. Note also that the above four referenced values are
still accepted for backwards-compatibility, but are mapped
internally to the new method of representing the option.
AST-105
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@146640 65c4cc65-6c06-0410-ace0-fbb531ad65f3
reorganized sip_notify.conf.sample a bit as well. Tested snom
reboot on snom 360 and verified snom-check-cfg worked as well.
(closes issue #13601)
Reported by: mjc
Tested by: seanbright
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@146312 65c4cc65-6c06-0410-ace0-fbb531ad65f3
TransNexus OSP Development
David Vossel
Mark Michelson
Richard Mudgett
Jeff Peeler
Kevin P. Fleming
Tilghman Lesher
Joshua Colp
Russell Bryant
Michiel van Baak
Steve Murphy
Olle Johansson
Dwayne M. Hubbard
Leif Madsen
Terry Wilson
Doug Bailey
Matthew Nicholson
Eliel C. Sardanons
Sean Bright
Matthew Fredrickson
BJ Weschke
Bradley Latus