https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r277247 | mnicholson | 2010-07-16 12:29:57 -0500 (Fri, 16 Jul 2010) | 4 lines
For pass through DTMF tones, measure the actual duration between the begin and end packets on the wire. If it is detected to be less than AST_MIN_DTMF_DURATION, trigger dtmf emulation.
AST-362
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@277250 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ast_sockaddr_stringiy_fmt (which is call by all ast_sockaddr_stringify* functions)
uses thread-local storage for storing the string that it creates. In cases where
ast_sockaddr_stringify_fmt was being called twice within the same statement, the
result of one call would be overwritten by the result of the other call. This
usually was happening in printf-like statements and was resulting in the same
stringified addressed being printed twice instead of two separate addresses.
I have fixed this by using ast_strdupa on the result of stringify functions if
they are used twice within the same statement. As far as I could tell, there were
no instances where a pointer to the result of such a call were saved anywhere, so
this is the only situation I could see where this error could occur.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@276570 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The purpose of this patch is to eliminate struct ast_callerid since it has
turned into a miscellaneous collection of various party information.
Eliminate struct ast_callerid and replace it with the following struct
organization:
struct ast_party_name {
char *str;
int char_set;
int presentation;
unsigned char valid;
};
struct ast_party_number {
char *str;
int plan;
int presentation;
unsigned char valid;
};
struct ast_party_subaddress {
char *str;
int type;
unsigned char odd_even_indicator;
unsigned char valid;
};
struct ast_party_id {
struct ast_party_name name;
struct ast_party_number number;
struct ast_party_subaddress subaddress;
char *tag;
};
struct ast_party_dialed {
struct {
char *str;
int plan;
} number;
struct ast_party_subaddress subaddress;
int transit_network_select;
};
struct ast_party_caller {
struct ast_party_id id;
char *ani;
int ani2;
};
The new organization adds some new information as well.
* The party name and number now have their own presentation value that can
be manipulated independently. ISDN supplies the presentation value for
the name and number at different times with the possibility that they
could be different.
* The party name and number now have a valid flag. Before this change the
name or number string could be empty if the presentation were restricted.
Most channel drivers assume that the name or number is then simply not
available instead of indicating that the name or number was restricted.
* The party name now has a character set value. SIP and Q.SIG have the
ability to indicate what character set a name string is using so it could
be presented properly.
* The dialed party now has a numbering plan value that could be useful to
have available.
The various channel drivers will need to be updated to support the new
core features as needed. They have simply been converted to supply
current functionality at this time.
The following items of note were either corrected or enhanced:
* The CONNECTEDLINE() and REDIRECTING() dialplan functions were
consolidated into func_callerid.c to share party id handling code.
* CALLERPRES() is now deprecated because the name and number have their
own presentation values.
* Fixed app_alarmreceiver.c write_metadata(). The workstring[] could
contain garbage. It also can only contain the caller id number so using
ast_callerid_parse() on it is silly. There was also a typo in the
CALLERNAME if test.
* Fixed app_rpt.c using ast_callerid_parse() on the channel's caller id
number string. ast_callerid_parse() alters the given buffer which in this
case is the channel's caller id number string. Then using
ast_shrink_phone_number() could alter it even more.
* Fixed caller ID name and number memory leak in chan_usbradio.c.
* Fixed uninitialized char arrays cid_num[] and cid_name[] in
sig_analog.c.
* Protected access to a caller channel with lock in chan_sip.c.
* Clarified intent of code in app_meetme.c sla_ring_station() and
dial_trunk(). Also made save all caller ID data instead of just the name
and number strings.
* Simplified cdr.c set_one_cid(). It hand coded the ast_callerid_merge()
function.
* Corrected some weirdness with app_privacy.c's use of caller
presentation.
Review: https://reviewboard.asterisk.org/r/702/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@276347 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r275994 | russell | 2010-07-13 11:51:18 -0500 (Tue, 13 Jul 2010) | 14 lines
Access peer->cdr directly instead of through a saved off reference.
At this point in the code, it is possible that peer_cdr may be invalid.
Specifically, in the blind transfer code, CDRs are swapped between channels.
So, peer_cdr is no longer == peer->cdr.
The scenario that exposed a crash in this code was a blind transfer that hit
the system call limit, causing the transferee channel to get destroyed after
the transfer attempt failed. Even if it succeeds and this code doesn't crash,
this code was still trying to reset a CDR on a channel that was now owned by
a different thread, which is a BadThing(tm).
(ABE-2417)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@275995 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r275665 | jpeeler | 2010-07-12 11:58:39 -0500 (Mon, 12 Jul 2010) | 11 lines
Change ast_write to not stop generator when called from ast_prod.
For SIP channels configured with the progressinband option on, the ringback was
being immediately stopped. This problem was due to ast_prod being moved for a
deadlock fix in 259858. Prodding the channel after setting up the generator
triggered the check in ast_write to stop the generator. The fix here should
write the frame the same as was done before the call to ast_prod was moved.
(closes issue #17372)
Reported by: tech_admin
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@275682 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The bridge handling code did not properly consider feature groups when setting
parameters that would affect whether or not a native bridge would be attempted.
If DYNAMIC_FEATURES only include a feature group, a native bridge would occur
that may prevent features from working.
Fix a bug in verbose output that would show the key mapping as empty if it was
using the default mapping and not a custom mapping in the feature group.
Add feature groups to the output of "features show".
Adjust the feature execution logic to match that of the logic when executing
a feature that was not configured through a feature group.
Update features.conf.sample to show that an '=' is still required if using
the default key mapping from [applicationmap].
Finally, clean up a little bit of formatting to better coform to coding
guidelines while in the area.
(closes issue #17589)
Reported by: lmadsen
Patches:
issue_17589.rev4.txt uploaded by russell (license 2)
Tested by: russell, lmadsen
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@275424 65c4cc65-6c06-0410-ace0-fbb531ad65f3
warning (at least with gcc 4.4.4):
netsock2.c:492: warning: dereferencing pointer ‘({anonymous})’ does break strict-aliasing rules
So we're back to using memcpy()...
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@274909 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds a generic API for accommodating IPv6 and IPv4 addresses
within Asterisk. While many files have been updated to make use of the
API, chan_sip and the RTP code are the files which actually support
IPv6 addresses at the time of this commit. The way has been paved for
easier upgrading for other files in the near future, though.
Big thanks go to Simon Perrault, Marc Blanchet, and Jean-Philippe Dionne
for their hard work on this.
(closes issue #17565)
Reported by: russell
Patches:
asteriskv6-test-report.pdf uploaded by russell (license 2)
Review: https://reviewboard.asterisk.org/r/743
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@274783 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r273565 | russell | 2010-07-01 17:09:19 -0500 (Thu, 01 Jul 2010) | 7 lines
Don't return a partially initialized datastore.
If memory allocation fails in ast_strdup(), don't return a partially
initialized datastore. Bad things may happen.
(related to ABE-2415)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@273566 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Otherwise, it goes to all manager sessions and may exclude the current session,
if the Events mask excludes it.
(closes issue #17504)
Reported by: rrb3942
Patches:
showdialplan_patch.diff uploaded by rrb3942 (license 1003)
Tested by: rrb3942
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@273054 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This fixes a ref count leak in event filters and checks for
a filter container allocation failure during session creation.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@271905 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch as documented in the sample config allows one to optionally apply
white, black, or both types of filtering to manager events. The new
'eventfilter' option is set per user.
(closes issue #14861)
Reported by: fnordian
Patches:
eventfilter3.patch uploaded by fnordian (license 110),
modified by me
Review: https://reviewboard.asterisk.org/r/673/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@271868 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If both the transferer and transferee of a attended transfer hangup before
the new channel picks up, the new channel should be hung up as well as it
has no endpoint to talk to. This mirrors the expected behavior used in 1.4.
(closes issue #17444)
Reported by: corruptor
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@271831 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If there is a problem with a firmware file, Polycom phones will close the
connection. We were continuing to send the file anyway. There should be no
reason to continue sending a file if there is an error writing it.
(closes issue #16682)
Reported by: lmadsen
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@270692 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r269821 | mmichelson | 2010-06-10 14:30:12 -0500 (Thu, 10 Jun 2010) | 19 lines
Fix potential crash when writing raw SLIN audio on a PLC-enabled channel.
The issue here was that the frame created when adjusting for PLC had no offset
to its audio data. If this frame were translated to another format prior to
being sent out an RTP socket, all went well because the translation code would
put an appropriate offset into the frame. However, if the SLIN audio were not
translated before being sent out the RTP socket, bad things would happen.
Specifically, the ast_rtp_raw_write makes the assumption that the frame has
at least enough of an offset that it can accommodate an RTP header. This was
not the case. As such, data was being written prior to the allocation, likely
corrupting the data the memory allocator had written. Thus when the time came
to free the data, all hell broke loose. ....Well, Asterisk crashed at least.
The fix was just what one would expect. Offset the data in the frame by a reasonable
amount. The method I used is a bit odd since the data in the frame is 16 bit integers
and not bytes. I left a big ol' comment about it. This can be improved on if someone
is interested. I was more interested in getting the crash resolved.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@269822 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Valgrind pointed out that attempting to get an IE value from an event that has
no IEs produces an invalid memory read past the end of the event. Thanks to
mmichelson for pointing the problem out to me and then testing the fix.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@269417 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r269334 | pabelanger | 2010-06-09 13:24:53 -0400 (Wed, 09 Jun 2010) | 12 lines
Fix Debian init script to not use -c.
When using the init script as-is currently, it could cause issues on Debian
such as high CPU usage. This fix has worked for several people so I'm
implementing the change. We now handle color displays properly.
(closes issue #16784)
Reported by: pabelanger
Patches:
20100530__issue16784__2.diff.txt uploaded by tilghman (license 14)
Tested by: pabelanger, tilghman
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@269346 65c4cc65-6c06-0410-ace0-fbb531ad65f3
After 5 years in mantis and over a year on reviewboard, SRTP support is finally
being comitted. This includes generic CHANNEL dialplan functions that work for
getting the status of whether a call has secure media or signaling as defined
by the underlying channel technology and for setting whether or not a new
channel being bridged to a calling channel should have secure signaling or
media. See doc/tex/secure-calls.tex for examples.
Original patch by mikma, updated for trunk and revised by me.
(closes issue #5413)
Reported by: mikma
Tested by: twilson, notthematrix, hemanshurpatel
Review: https://reviewboard.asterisk.org/r/191/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@268894 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Suppress the warning about unexpected control subclass frames for
AST_CONTROL_CONNECTED_LINE, AST_CONTROL_REDIRECTING, and AST_CONTROL_AOC
in file.c:waitstream_core().
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@268578 65c4cc65-6c06-0410-ace0-fbb531ad65f3
What I did not originally see in my previous commit was that even though the
next digit could be detected before the previous was considered ended, the
detection of the next digit effectively ends the detection of the previous.
Therefore, the length moves in lockstep with the digit, and no separate counter
is needed for the length alone.
(closes issue #17371)
Reported by: alecdavis
(closes issue #17474)
Reported by: kenner
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@268456 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When ASTCFLAGS was specified with the make command, Makefile.rules was using
the specified value from the command line and not the one here, making it so this
flag would go missing.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@267303 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk Generic AOC Representation
- Generic AOC encode/decode routines.
(Generic AOC must be encoded to be passed on the wire in the AST_CONTROL_AOC frame)
- AST_CONTROL_AOC frame type to represent generic encoded AOC data
- Manager events for AOC-S, AOC-D, and AOC-E messages
Asterisk App Support
- app_dial AOC-S pass-through support on call setup
- app_queue AOC-S pass-through support on call setup
AOC Unit Tests
- AOC Unit Tests for encode/decode routines
- AOC Unit Test for manager event representation.
SIP AOC Support
- Pass-through of generic AOC-D and AOC-E messages to snom phones via the
snom AOC specification.
- Creation of chan_sip page3 flags for the addition of the new
'snom_aoc_enabled' sip.conf option.
IAX AOC Support
- Natively supports AOC pass-through through the use of the new
AST_CONTROL_AOC frame type
DAHDI AOC Support
- ETSI PRI full AOC Pass-through support
- 'aoc_enable' chan_dahdi.conf option for independently enabling
pass-through of AOC-S, AOC-D, AOC-E.
- 'aoce_delayhangup' option for retrieving AOC-E on disconnect.
- DAHDI A() dial string option for requesting AOC services.
example usage:
;requests AOC-S, AOC-D, and AOC-E on call setup
exten=>1111,1,Dial(DAHDI/g1/1112/A(s,d,e))
Review: https://reviewboard.asterisk.org/r/552/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@267096 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Actions (or failures to act) by external clients should not cause memory leaks
in Asterisk, especially when those continued leaks could cause Asterisk to
misbehave later.
(closes issue #17234)
Reported by: mav3rick
Patches:
20100510__issue17234.diff.txt uploaded by tilghman (license 14)
20100517__issue17234__trunk.diff.txt uploaded by tilghman (license 14)
Tested by: mav3rick, davidw
(closes issue #17365)
Reported by: davidw
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@266682 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r266585 | tilghman | 2010-06-01 10:17:46 -0500 (Tue, 01 Jun 2010) | 11 lines
Prevent CLI prompt from distorting output of lines shorter than the prompt.
Uses the VT100 method of clearing the line from the cursor position to the
end of the line: Esc-0K
(closes issue #17160)
Reported by: coolmig
Patches:
20100531__issue17160.diff.txt uploaded by tilghman (license 14)
Tested by: coolmig
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@266592 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r266142 | tilghman | 2010-05-26 16:11:44 -0500 (Wed, 26 May 2010) | 14 lines
Use sigaction for signals which should persist past the initial trigger, not signal.
If you call signal() in a Solaris signal handler, instead of just resetting
the signal handler, it causes the signal to refire, because the signal is not
marked as handled prior to the signal handler being called. This effectively
causes Solaris to immediately exceed the threadstack in recursive signal
handlers and crash.
(closes issue #17000)
Reported by: rmcgilvr
Patches:
20100526__issue17000.diff.txt uploaded by tilghman (license 14)
Tested by: rmcgilvr
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@266146 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch breaks up every part of the sip registry string during
config parsing and removes all parsing from transmit_register().
Thanks to Nick_Lewis for contributing this patch!
(closes issue #14331)
Reported by: Nick_Lewis
Patches:
chan_sip.c-domparse.patch uploaded by Nick Lewis (license 657)
chan_sip.c.patch uploaded by Nick Lewis (license 657)
chan_sip.c.domainparse3.patch uploaded by Nick Lewis (license 657)
chan_sip.c-domparse4.patch uploaded by Nick Lewis (license 657)
chan_sip.c-domparse5.patch uploaded by Nick Lewis (license 657)
nicklewispatch.diff uploaded by dvossel (license 671)
Tested by: Nick_Lewis, dvossel
Review: https://reviewboard.asterisk.org/r/628/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@266090 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The handling of the control subclass AST_CONTROL_READ_ACTION frame leaked
connected line string memory in __ast_read().
Also in __ast_read() the frame type switch should not have had a case for
AST_CONTROL_READ_ACTION. AST_CONTROL_READ_ACTION is not a frame type.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@265608 65c4cc65-6c06-0410-ace0-fbb531ad65f3
__ast_channel_alloc_ap() has several points in the initialization of a new
channel structure where it could fail. Since the channel structure is now
an ao2 object, the destructor callback needs to be able to handle clean up
when the structure setup is incomplete.
Problems corrected:
1) Failing to setup the alertpipe would not unreference the structure but
free it directly. Doing this to an ao2_object is very bad.
2) File descriptors need to be initialized to -1 before a construction
failure could occur so the destructor will not close unopened descriptors.
3) The destructor needs to check that the string field has been
initialized before using any string field values. Crashes expected.
4) The destructor should not notify devstate if the device name is empty.
It is a waste of cycles and a couple ERROR log messages are generated.
Review: https://reviewboard.asterisk.org/r/675/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@265174 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r264996 | mmichelson | 2010-05-21 11:28:34 -0500 (Fri, 21 May 2010) | 32 lines
Allow ast_safe_sleep to defer specific frames until after the sleep has concluded.
From reviewboard
Background:
A Digium customer discovered a somewhat odd bug. The setup is that parties A
and B are bridged, and party A places party B on hold. While party B is
listening to hold music, he mashes a bunch of DTMF. Party A takes party
B off hold while this is happening, but party B continues to hear hold
music. I could reproduce this about 1 in 5 times.
The issue:
When DTMF features are enabled and a user presses keys, the channel that
the DTMF is streamed to is placed in an ast_safe_sleep for 100 ms, the
duration of the emulated tone. If an AST_CONTROL_UNHOLD frame is read
from the channel during the sleep, the frame is dropped. Thus the
unhold indication is never made to the channel that was originally placed
on hold.
The fix:
Originally, I discussed with Kevin possible ways of fixing the specific
problem reported. However, we determined that the same type of problem
could happen in other situations where ast_safe_sleep() is used. Using
autoservice as a model, I modified ast_safe_sleep_conditional() to
defer specific frame types so they can be re-queued once the sleep has
finished. I made a common function for determining if a frame should
be deferred so that there are not two identical switch blocks to
maintain.
Review: https://reviewboard.asterisk.org/r/674/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@264997 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r264820 | rmudgett | 2010-05-20 18:23:21 -0500 (Thu, 20 May 2010) | 6 lines
ast_callerid_parse() had a path that left name uninitialized.
Several callers of ast_callerid_parse() do not initialize the name
parameter before calling thus there is the potential to use an
uninitialized pointer.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@264828 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Nick Lewis pointed out that the patch as committed wouldn't actually include
dynamic logger levels, which was missed by the other reviewers. Thanks!
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@264497 65c4cc65-6c06-0410-ace0-fbb531ad65f3
From reviewboard:
The problem here is a bit complex, so try to bear with me...
It was noticed by a Digium customer that generic PLC (as configured in
codecs.conf) did not appear to actually be having any sort of benefit when
packet loss was introduced on an RTP stream. I reproduced this issue myself
by streaming a file across an RTP stream and dropping approx. 5% of the
RTP packets. I saw no real difference between when PLC was enabled or disabled
when using wireshark to analyze the RTP streams.
After analyzing what was going on, it became clear that one of the problems
faced was that when running my tests, the translation paths were being set
up in such a way that PLC could not possibly work as expected. To illustrate,
if packets are lost on channel A's read stream, then we expect that PLC will
be applied to channel B's write stream. The problem is that generic PLC can
only be done when there is a translation path that moves from some codec to
SLINEAR. When I would run my tests, I found that every single time, read
and write translation paths would be set up on channel A instead of channel
B. There appeared to be no real way to predict which channel the translation
paths would be set up on.
This is where Kevin swooped in to let me know about the transcode_via_sln
option in asterisk.conf. It is supposed to work by placing a read translation
path on both channels from the channel's rawreadformat to SLINEAR. It also
will place a write translation path on both channels from SLINEAR to the
channel's rawwriteformat. Using this option allows one to predictably set up
translation paths on all channels. There are two problems with this, though.
First and foremost, the transcode_via_sln option did not appear to be working
properly when I was placing a SIP call between two endpoints which did not
share any common formats. Second, even if this option were to work, for PLC
to be applied, there had to be a write translation path that would go from
some format to SLINEAR. It would not work properly if the starting format
of translation was SLINEAR.
The one-line change presented in this review request in chan_sip.c fixed the
first issue for me. The problem was that in sip_request_call, the
jointcapability of the outbound channel was being set to the format passed to
sip_request_call. This is nativeformats of the inbound channel. Because of this,
when ast_channel_make_compatible was called by app_dial, both channels already
had compatibly read and write formats. Thus, no translation path was set up at
the time. My change is to set the jointcapability of the sip_pvt created during
sip_request_call to the intersection of the inbound channel's nativeformats and
the configured peer capability that we determined during the earlier call to
create_addr. Doing this got the translation paths set up as expected when using
transcode_via_sln.
The changes presented in channel.c fixed the second issue for me. First and
foremost, when Asterisk is started, we'll read codecs.conf to see the value of
the genericplc option. If this option is set, and ast_write is called for a
frame with no data, then we will attempt to fill in the missing samples for
the frame. The implementation uses a channel datastore for maintaining the
PLC state and for creating a buffer to store PLC samples in. Even when we
receive a frame with data, we'll call plc_rx so that the PLC state will have
knowledge of the previous voice frame, which it can use as a basis for when
it comes time to actually do a PLC fill-in.
So, reviewers, now I ask for your help. First off, there's the one line change
in chan_sip that I have put in. Is it right? By my logic it seems correct, but
I'm sure someone can tell me why it is not going to work. This is probably the
change I'm least concerned about, though. What concerns me much more is the
set of changes in channel.c. First off, am I even doing it right? When I run
tests, I can clearly see that when PLC is activated, I see a significant increase
in RTP traffic where I would expect it to be. However, in my humble opinion, the
audio sounds kind of crappy whenever the PLC fill-in is done. It sounds worse to
me than when no PLC is used at all. I need someone to review the logic I have used
to be sure that I'm not misusing anything. As far as I can see my pointer arithmetic
is correct, and my use of AST_FRIENDLY_OFFSET should be correct as well, but I'm
sure someone can point out somewhere where I've done something incorrectly.
As I was writing this review request up, I decided to give the code a test run under
valgrind, and I find that for some reason, calls to plc_rx are causing some invalid
reads. Apparently I'm reading past the end of a buffer somehow. I'll have to dig around
a bit to see why that is the case. If it's obvious to someone reviewing, speak up!
Finally, I have one other proposal that is not reflected in my code review. Since
without transcode_via_sln set, one cannot predict or control where a translation
path will be up, it seems to me that the current practice of using PLC only when
transcoding to SLINEAR is not useful. I recommend that once it has been determined
that the method used in this code review is correct and works as expected, then
the code in translate.c that invokes PLC should be removed.
Review: https://reviewboard.asterisk.org/r/622/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@264452 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When decode_length returns the length there is a check to see if that
length is negative, if so the decode loop breaks as this means the
limit has been reached. The problem here is that length is an
unsigned int, so length can never be negative. This resulted in
an infinite loop.
(issue #17352)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@264400 65c4cc65-6c06-0410-ace0-fbb531ad65f3
(closes issue #17235)
Reported by: frawd
Patches:
new_dtmf_dsp_len.patch uploaded by frawd (license 610)
20100518__issue17235.diff.txt uploaded by tilghman (license 14)
Tested by: frawd
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@264204 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Now that Asterisk modules can dynamically create and destroy logger levels
on demand, it's useful to be able to configure a logger channel (console,
file, whatever) to be able to accept log messages from *all* levels, even
levels created dynamically. This patch adds support for this, by allowing
the '*' level name to be used in logger.conf.
Review: https://reviewboard.asterisk.org/r/663/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@264160 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added the keyword 'all' to the 'channel hangup request' CLI command
so that you can request all channels to be hungup without having to
restart Asterisk.
(closes issue #16009)
Reported by: moy
Patches:
hangup-all-rev-221688.patch uploaded by moy (license 222)
Tested by: moy, russell
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@264117 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r263949 | tilghman | 2010-05-19 01:32:27 -0500 (Wed, 19 May 2010) | 8 lines
Because progress is called multiple times, across several frames, we must persist states when detecting multitone sequences.
(closes issue #16749)
Reported by: dant
Patches:
dsp.c-bug16749-1.patch uploaded by dant (license 670)
Tested by: dant
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@263950 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r263639 | mmichelson | 2010-05-17 17:00:28 -0500 (Mon, 17 May 2010) | 10 lines
Fix logic error when checking for a devstate provider.
When using strsep, if one of the list of specified separators is not found,
it is the first parameter to strsep which is now NULL, not the pointer returned
by strsep.
This issue isn't especially severe in that the worst it is likely to do is waste
some cycles when a device with no '/' and no ':' is passed to ast_device_state.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@263640 65c4cc65-6c06-0410-ace0-fbb531ad65f3
From reviewboard:
Digium has a commercial customer who has made extensive use of the connected party and
redirecting information present in later versions of Asterisk Business Edition and which
is to be in the upcoming 1.8 release. Through their use of the feature, new problems and solutions
have come about. This patch adds several enhancements to maximize usage of the connected party
and redirecting information functionality.
First, Asterisk trunk already had connected line interception macros. These macros allow you to
manipulate connected line information before it was sent out to its target. This patch adds the
same feature except for redirecting information instead.
Second, the ast_callerid and ast_party_id structures have been enhanced to provide a "tag." This
tag can be set with func_callerid, func_connectedline, func_redirecting, and in the case of DAHDI,
mISDN, and SIP channels, can be set in a configuration file. The idea behind the callerid tag is
that it can be set to whatever value the administrator likes. Later, when running connected line
and redirecting macros, the admin can read the tag off the appropriate structure to determine what
action to take. You can think of this sort of like a channel variable, except that instead of having
the variable associated with a channel, the variable is associated with a specific identity within
Asterisk.
Third, app_dial has two new options, s and u. The s option lets a dialplan writer force a specific
caller ID tag to be placed on the outgoing channel. The u option allows the dialplan writer to force
a specific calling presentation value on the outgoing channel.
Fourth, there is a new control frame subclass called AST_CONTROL_READ_ACTION added. This was added
to correct a very specific situation. In the case of SIP semi-attended (blond) transfers, the party
being transferred would not have the opportunity to run a connected line interception macro to
possibly alter the transfer target's connected line information. The issue here was that during a
blond transfer, the SIP transfer code has no bridged channel on which to queue the connected line
update. The way this was corrected was to add this new control frame subclass. Now, we queue an
AST_CONTROL_READ_ACTION frame on the channel on which the connected line interception macro should
be run. When ast_read is called to read the frame, ast_read responds by calling a callback function
associated with the specific read action the control frame describes. In this case, the action taken
is to run the connected line interception macro on the transferee's channel.
Review: https://reviewboard.asterisk.org/r/652/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@263541 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Sean Bright pointed out that we lost a set of newline characters in commit
190349 on a line I had recently changed. Yay for code review on commits.
(issue #17231, #10961)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@263460 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r263456 | lmadsen | 2010-05-17 09:35:18 -0500 (Mon, 17 May 2010) | 11 lines
Manager cookies are not compatible with RFC2109.
The Version field in the cookies we're setting contain quotes around the version
number which is not compatible with RFC2109 and breaks some implementations.
(closes issue #17231)
Reported by: ecarruda
Patches:
manager_rfc2109-trunk-v1.patch uploaded by ecarruda (license 559)
manager_rfc2109-1.6.2-v1.patch uploaded by ecarruda (license 559)
Tested by: ecarruda, russell
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@263457 65c4cc65-6c06-0410-ace0-fbb531ad65f3
As pointed out by 'akshayb' on #asterisk-dev, the code here called a list of
bucket entries a 'bucket', and the entries within the bucket were called
'bucket_list'. This made the code very hard to understand without reading
all of it... so I've renamed 'bucket_list' to 'bucket_entry' to clarify the
purpose of the structure.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@263208 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This will save a considerable amount of CPU on the BSDs, including Mac OS X,
as it eliminates several places in the code that we previously used a busy
loop. Additionally, this adds a res_timing interface, using kqueue timers.
Review: https://reviewboard.asterisk.org/r/543/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@262852 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This bug surfaced in 1.6.2 and does not affect code in any other released
version of Asterisk. It manifested itself as SIP qualify not happening when
it should, causing peers to go unreachable. This was debugged down to scheduler
entries sometimes not getting executed when they were supposed to, which was in
turn caused by an error in the heap code.
The problem only sometimes occurs, and it is due to the logic for removing an entry
in the heap from an arbitrary location (not just popping off the top). The scheduler
performs this operation frequently when entries are removed before they run (when
ast_sched_del() is used).
In a normal pop off of the top of the heap, a node is taken off the bottom,
placed at the top, and then bubbled down until the max heap property is restored
(see max_heapify()). This same logic was used for removing an arbitrary node
from the middle of the heap. Unfortunately, that logic is full of fail. This
patch fixes that by fully restoring the max heap property when a node is thrown
into the middle of the heap. Instead of just pushing it down as appropriate, it
first pushes it up as high as it will go, and _then_ pushes it down.
Lastly, fix a minor problem in ast_heap_verify(), which is only used for
debugging. If a parent and child node have the same value, that is not an
error. The only error is if a parent's value is less than its children.
A huge thanks goes out to cappucinoking for debugging this down to the scheduler,
and then producing an ast_heap test case that demonstrated the breakage. That
made it very easy for me to focus on the heap logic and produce a fix. Open source
projects are awesome.
(closes issue #16936)
Reported by: ib2
Tested by: cappucinoking, crjw
(closes issue #17277)
Reported by: cappucinoking
Patches:
heap-fix.rev2.diff uploaded by russell (license 2)
Tested by: cappucinoking, russell
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@261496 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r261093 | tilghman | 2010-05-04 18:36:53 -0500 (Tue, 04 May 2010) | 7 lines
Protect against overflow, when calculating how long to wait for a frame.
(closes issue #17128)
Reported by: under
Patches:
d.diff uploaded by under (license 914)
........
r261094 | tilghman | 2010-05-04 18:47:08 -0500 (Tue, 04 May 2010) | 2 lines
Add a tiny corner case to the previous commit
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@261095 65c4cc65-6c06-0410-ace0-fbb531ad65f3
We have some functions inside the AstData API to get the tree
in XML form, but it is not required at the moment to compile
asterisk and we can disable that part of the API if we don't have
libxml2 support.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@260521 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This saves time, when, even though the system allows the process limit to be
that high, the practical limit is much lower. Also introduce an additional
optimization, in the form of using the CLOEXEC flag to close descriptors at
the right time.
(closes issue #17223)
Reported by: dbackeberg
Patches:
20100423__issue17223.diff.txt uploaded by tilghman (license 14)
Tested by: dbackeberg
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@260292 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r260049 | dvossel | 2010-04-29 10:31:02 -0500 (Thu, 29 Apr 2010) | 14 lines
Fixes crash in audiohook_write_list
The middle_frame in the audiohook_write_list function was
being freed if a audiohook manipulator returned a failure.
This is incorrect logic. This patch resolves this and
adds detailed descriptions of how this function should work
and why manipulator failures must be ignored.
(closes issue #17052)
Reported by: dvossel
Tested by: dvossel
(closes issue #16196)
Reported by: atis
Review: https://reviewboard.asterisk.org/r/623/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@260050 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r259858 | dvossel | 2010-04-28 16:16:03 -0500 (Wed, 28 Apr 2010) | 33 lines
resolves deadlocks in chan_local
Issue_1.
In the local_hangup() 3 locks must be held at the same time... pvt, pvt->chan,
and pvt->owner. Proper deadlock avoidance is done when the channel to hangup
is the outbound chan_local channel, but when it is not the outbound channel we
have an issue... We attempt to do deadlock avoidance only on the tech pvt, when
both the tech pvt and the pvt->owner are locked coming into that loop. By
never giving up the pvt->owner channel deadlock avoidance is not entirely possible.
This patch resolves that by doing deadlock avoidance on both the pvt->owner and the pvt
when trying to get the pvt->chan lock.
Issue_2.
ast_prod() is used in ast_activate_generator() to queue a frame on the channel
and make the channel's read function get called. This function is used in
ast_activate_generator() while the channel is locked, which mean's the channel
will have a lock both from the generator code and the frame_queue code by the
time it gets to chan_local.c's local_queue_frame code... local_queue_frame
contains some of the same crazy deadlock avoidance that local_hangup requires,
and this recursive lock prevents that deadlock avoidance from happening correctly.
This patch removes ast_prod() from the channel lock so only one lock is held during
the local_queue_frame function.
(closes issue #17185)
Reported by: schmoozecom
Patches:
issue_17185_v1.diff uploaded by dvossel (license 671)
issue_17185_v2.diff uploaded by dvossel (license 671)
Tested by: schmoozecom, GameGamer43
Review: https://reviewboard.asterisk.org/r/631/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@259870 65c4cc65-6c06-0410-ace0-fbb531ad65f3
autoconf2.13 couldn't handle AC_PROG_GREP, so I removed it. This is fine,
since we don't need to use anything that the configure script doesn't.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@259439 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r259018 | mmichelson | 2010-04-26 16:03:08 -0500 (Mon, 26 Apr 2010) | 13 lines
Prevent Newchannel manager events for dummy channels.
No Newchannel manager event will be fired for channels that are
allocated to not match a registered technology type. Thus bogus
channels allocated solely for variable substitution or CDR
operations do not result in a Newchannel event.
(closes issue #16957)
Reported by: atis
Review: https://reviewboard.asterisk.org/r/601
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@259023 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r193391 | mnicholson | 2009-05-08 16:01:25 -0500 (Fri, 08 May 2009) | 8 lines
Set the proper disposition on originated calls.
(closes issue #14167)
Reported by: jpt
Patches:
call-file-missing-cdr2.diff uploaded by mnicholson (license 96)
Tested by: dlotina, rmartinez, mnicholson
........
r258670 | mnicholson | 2010-04-22 16:49:07 -0500 (Thu, 22 Apr 2010) | 11 lines
Fix broken CDR behavior.
This change allows a CDR record previously marked with disposition ANSWERED to be set as BUSY or NO ANSWER.
Additionally this change partially reverts r235635 and does not set the AST_CDR_FLAG_ORIGINATED flag on CDRs generated from ast_call(). To preserve proper CDR behavior, the AST_CDR_FLAG_DIALED flag is now cleared from all brige CDRs in ast_bridge_call().
(closes issue #16797)
Reported by: VarnishedOtter
Tested by: mnicholson
........
(closes issue #16222)
Reported by: telles
Tested by: mnicholson
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@258671 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch introduces another test in test_event.c that exercises most of the
subscription related ast_event API calls. I made some minor additions to the
existing event allocation test to increase API coverage by the test code.
Finally, I made a list in a comment of API calls not yet touched by the test
module as a to-do list for future test development.
During the development of this test code, I discovered a number of bugs in
the event API.
1) subscriptions to AST_EVENT_ALL were not handled appropriately in a couple
of different places. The API allows a subscription to all event types,
but with IE parameters, just as if it was a subscription to a specific
event type. However, the parameters were being ignored. This affected
ast_event_check_subscriber() and event distribution to subscribers.
2) Some of the logic in ast_event_check_subscriber() for checking subscriptions
against query parameters was wrong.
Review: https://reviewboard.asterisk.org/r/617/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@258632 65c4cc65-6c06-0410-ace0-fbb531ad65f3
"Bad Things" would happen if Asterisk was compiled with DEBUG_THREADS, but a
loaded module was not (or vice versa). This also immensely simplifies the
lock code, since there are no longer 2 separate versions of them.
Review: https://reviewboard.asterisk.org/r/508/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@258557 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This module implements an abstraction for retrieving and exporting
asterisk data.
Developed by:
Brett Bryant <brettbryant@gmail.com>
Eliel C. Sardanons (LU1ALY) <eliels@gmail.com>
For the Google Summer of code 2009 Project.
Documentation can be found in doxygen format and inside the
header include/asterisk/data.h
Review: https://reviewboard.asterisk.org/r/275/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@258517 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added a new manager command to mute/unmute MixMonitor audio on a channel.
Added a new feature to audiohooks so that you can mute either read / write
(or both) types of frames - this allows for MixMonitor to mute either side
of the conversation without affecting the conversation itself.
(closes issue #16740)
Reported by: jmls
Review: https://reviewboard.asterisk.org/r/487/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@258190 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There were many changes in revision 176627 which would avoid the error that a
missing config would have caused. Other than this, there are no other config
files (including asterisk.conf, surprisingly) that are required.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@257947 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Because res/res_features.c was removed and main/cdr.c added, these changes
didn't make it to trunk and the 1.6.x branches
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@257810 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Application arguments within the feature map could possibly contain a comma,
which conflicts with the syntax of the features.conf configuration file. This
patch allows the argument to be wrapped in parentheses or quoted, to allow the
application arguments to be interpreted as a single configuration parameter.
(closes issue #16646)
Reported by: pinga-fogo
Patches:
20100414__issue16646.diff.txt uploaded by tilghman (license 14)
Tested by: tilghman
Review: https://reviewboard.asterisk.org/r/547/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@257262 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r257070 | mnicholson | 2010-04-13 11:46:30 -0500 (Tue, 13 Apr 2010) | 9 lines
Add an option to restore past broken behavor of the Events manager action
Before r238915, certain values for the EventMask parameter of the Events action would result in no response being returned. This patch adds an option to restore that broken behavior. Also while fixing this bug I discovered that passing an empty EventMasks parameter would also result in no response being returned, this has been fixed as well while being preserved when the broken behavior is requested.
(closes issue #17023)
Reported by: nblasgen
Review: https://reviewboard.asterisk.org/r/602/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@257146 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Specifically, the situation would happen when multiple
callers would request CC for a single generically-monitored
device. If the monitored device became available but the
caller did not answer the recall, then there was nothing
that would poke the CC core to let it know that it should
attempt to recall someone else instead.
After careful consideration, I came to the conclusion that
the only area of Asterisk that needed to be touched was the
generic CC monitor. All other types of CC would require something
outside of Asterisk to invoke a recall for a separate device.
This was accomplished by changing the generic monitor destructor
to poke other generic monitor instances if the device is currently
available and the specific instance was currently not suspended.
In order to not accidentally trigger recalls at bad times, the
fit_for_recall flag was also added to the generic_monitor_instance_list
struct. This gets set as soon as a monitored device becomes available.
It gets cleared if a CCNR request triggers the creation of a new
generic monitor instance. By doing this, we don't accidentally try
to recall a device when the monitored device was being monitored
for CCNR and never actually became available for recall in the first
place.
This error was discovered by Steve Pitts during in-house testing
at Digium.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@256985 65c4cc65-6c06-0410-ace0-fbb531ad65f3
From Reviewboard:
CCSS stands for Call Completion Supplementary Services. An admittedly out-of-date
overview of the architecture can be found in the file doc/CCSS_architecture.pdf
in the CCSS branch. Off the top of my head, the big differences between what is
implemented and what is in the document are as follows:
1. We did not end up modifying the Hangup application at all.
2. The document states that a single call completion monitor may be used across
multiple calls to the same device. This proved to not be such a good idea
when implementing protocol-specific monitors, and so we ended up using one
monitor per-device per-call.
3. There are some configuration options which were conceived after the document
was written. These are documented in the ccss.conf.sample that is on this
review request.
For some basic understanding of terminology used throughout this code, see the
ccss.tex document that is on this review.
This implements CCBS and CCNR in several flavors.
First up is a "generic" implementation, which can work over any channel technology
provided that the channel technology can accurately report device state. Call
completion is requested using the dialplan application CallCompletionRequest and can
be canceled using CallCompletionCancel. Device state subscriptions are used in order
to monitor the state of called parties.
Next, there is a SIP-specific implementation of call completion. This method uses the
methods outlined in draft-ietf-bliss-call-completion-06 to implement call completion
using SIP signaling. There are a few things to note here:
* The agent/monitor terminology used throughout Asterisk sometimes is the reverse of
what is defined in the referenced draft.
* Implementation of the draft required support for SIP PUBLISH. I attempted to write
this in a generic-enough fashion such that if someone were to want to write PUBLISH
support for other event packages, such as dialog-state or presence, most of the effort
would be in writing callbacks specific to the event package.
* A subportion of supporting PUBLISH reception was that we had to implement a PIDF
parser. The PIDF support added is a bit minimal. I first wrote a validation
routine to ensure that the PIDF document is formatted properly. The rest of the
PIDF reading is done in-line in the call-completion-specific PUBLISH-handling
code. In other words, while there is PIDF support here, it is not in any state
where it could easily be applied to other event packages as is.
Finally, there are a variety of ISDN-related call completion protocols supported. These
were written by Richard Mudgett, and as such I can't really say much about their
implementation. There are notes in the CHANGES file that indicate the ISDN protocols
over which call completion is supported.
Review: https://reviewboard.asterisk.org/r/523
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@256528 65c4cc65-6c06-0410-ace0-fbb531ad65f3
From Review Board:
There are two interrelated changes here.
First, there is the introduction of func_srv. This adds two new read-only
dialplan functions, SRVQUERY and SRVRESULT. They work very similarly to the
ENUMQUERY and ENUMRESULT functions, except that this allows one to query SRV
records instead. In order to facilitate this work, I added a couple of new API
calls to srv.h. ast_srv_get_record_count tells the number of records returned
by an SRV lookup. This number is calculated at the time of the SRV lookup.
ast_srv_get_nth_record allows one to get a numbered SRV record.
Second, there is the modification to chan_sip that allows one to specify a
hostname or IP address (along with a port) to send an outgoing INVITE to when
dialing a SIP peer. This goes hand-in-hand with func_srv. You can query SRV
records and then use the host and port from the results to dial via a specific
host instead of what is configured in sip.conf.
Review: https://reviewboard.asterisk.org/r/608
SWP-1200
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@256485 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Some platforms prefix externally-visible symbols in object files generated
from C sources (most commonly, '_' is the prefix). On these platforms,
the existing symbol export filtering process ends up suppressing all the symbols
that are supposed to be left visible. This patch allows the prefix string
to be supplied to the top-level Makefile in the LINKER_SYMBOL_PREFIX variable,
and then generates the linker scripts as required to include the prefix
supplied.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@255906 65c4cc65-6c06-0410-ace0-fbb531ad65f3
application is executing on a channel.
This patch addresses an issue found during working with end-users
using res_fax. If an incoming call is answered in the dialplan, or
jumps to the 'fax' extension due to reception of a CNG tone (with
faxdetect enabled), and then the remote endpoint sends a T.38
re-INVITE, it is possible for the channel's T.38 state to be
'T38_STATE_NEGOTIATING' when the application starts up. Unfortunately,
even if the application wants to use T.38, it can't respond to the
peer's negotiation request, because the AST_CONTROL_T38_PARAMETERS
control frame that chan_sip sent originally has been lost, and the
application needs the content of that frame to be able to formulate a
reply.
This patch adds a new 'request' type to AST_CONTROL_T38_PARAMETERS,
AST_T38_REQUEST_PARMS. If the application sends this request, chan_sip
will re-send the original control frame (with
AST_T38_REQUEST_NEGOTIATE as the request type), and the application
can respond as normal. If this occurs within the five second timeout
in chan_sip, the automatic cancellation of the peer reinvite will be
stopped, and the application will 'own' the negotiation process from
that point onwards.
This also improves the code path in chan_sip to allow sip_indicate(),
when called for AST_CONTROL_T38_PARAMETERS, to be able to return a
non-zero response, which should have been in place before since the
control frame *can* fail to be processed properly. It also modifies
ast_indicate() to return whatever result the channel driver returned
for this control frame, rather than converting all non-zero results
into '-1'. Finally, the new request type intentionally returns a
positive value, so that an application that sends
AST_T38_REQUEST_PARMS can know for certain whether the channel driver
accepted it and will be replying with a control frame of its own, or
whether it was ignored (if the sip_indicate()/ast_indicate() path had
properly supported failure responses before, this would not be
necessary).
This patch also modifies res_fax to take advantage of the new request.
In addition, this patch makes sip_t38_abort() actually lock the
private structure before doing its work... bad programmer, no donut.
This patch also enhances chan_sip's 'faxdetect' support to allow
triggering on T.38 re-INVITEs received as well as CNG tone detection.
Review: https://reviewboard.asterisk.org/r/556/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@254450 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Here is a cut and paste of my review request for this change:
This past weekend, Russell ran our current suite of unit tests for Asterisk
under valgrind. The PBX pattern match test caused valgrind to spew forth two
invalid read errors. This patch contains two changes that shut valgrind up and
do not cause any new memory leaks.
Change 1: In ast_context_remove_extension_callerid2, valgrind reported an
invalid read in the for loop close to the function's end. Specifically, one of
the the strcmp calls in the loop control was reading invalid memory. This was
because the caller of ast_context_remove_extension_callerid2 (__ast_context
destroy in this case) passed as a parameter a shallow copy of an ast_exten's
exten field. This same ast_exten was what was destroyed inside the for loop,
thus any iterations of the for loop beyond the destruction of the ast_exten
would result in invalid reads. My fix for this is to make a copy of the
ast_exten's exten field and pass the copy to
ast_context_remove_extension_callerid2. In addition, I have also acted
similarly with the ast_exten's matchcid field. Since in this case a NULL is
handled quite differently than an empty string, I needed to be a bit more
careful with its handling.
Change 2: In __ast_context_destroy, we iterated over a hashtab and called
ast_context_remove_extension_callerid2 on each item. Specifically, the hashtab
over which we were iterating was an ast_exten's peer_table. Inside of
ast_context_remove_extension_callerid2, we could possibly destroy this
ast_exten, which also caused the hashtab to be freed. Attempting to call
ast_hashtab_end_traversal on the hashtab iterator caused an invalid read to
occur when trying to read the iterator->tab->do_locking field since
iterator->tab had already been freed. My handling of this problem is a bit less
straightforward. With each iteration over the hashtab's contents, we set a
variable called "end_traversal" based on the return of
ast_context_remove_extension_callerid2. If 0 is ever returned, then we know
that the extension was found and destroyed. Because of this, we cannot call
ast_hashtab_end_traversal because we will be guaranteeing a read of invalid
memory. In such a case, we forego calling ast_hashtab_end_traversal and instead
call ast_free on the hashtab iterator.
Review: https://reviewboard.asterisk.org/r/585
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@254362 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This changes native bridging to break one millisecond early so that the more
accurate timeval calculations done in the generic bridge can be performed using
the bridge config. Currently the time between exiting native bridging slightly
late can sometimes cause a large enough discrepancy for warnings to be missed.
For the record, 1.4 does not attempt to native bridge at all when warnings are
enabled.
(closes issue #15815)
Reported by: adomjan
Review: https://reviewboard.asterisk.org/r/577/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@254050 65c4cc65-6c06-0410-ace0-fbb531ad65f3
users expect them to work.
'core set debug' and 'core set verbose' can optionally change the
level for a specific filename; however, this is actually for a
specific source file name, not the module that source file is included
in. With examples like chan_sip, chan_iax2, chan_misdn and others
consisting of multiple source files, this will not lead to the
behavior that users expect. If they want to set the debug level for
chan_sip, they want it set for all of chan_sip, and not to have to
also set it for reqresp_parser and other files that comprise the
chan_sip module.
This patch changes this functionality to be module-name based instead
of file-name based.
To make this work, some Makefile modifications were required to ensure
that the AST_MODULE definition is present in each object file produced
for each module as well.
Review: https://reviewboard.asterisk.org/r/574/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@253917 65c4cc65-6c06-0410-ace0-fbb531ad65f3
We can have bad results when a module, upon being loaded, attempts
to reference the channels container if the container hasn't yet
been initialized. I saw this happen by trying to preload pbx_config.so
and having a hint defined which referenced a non-existent SIP peer.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@253872 65c4cc65-6c06-0410-ace0-fbb531ad65f3
internal_ao2_ref uses INTERNAL_OBJ which mzy report 'bad magic number', but
internal_ao2_ref continues on, causing segfault.
Although AO2_MAGIC number is checked by INTERNAL_OBJ before internal_ao2_ref is
called, A02_MAGIC is being destroyed (or a wrong pointer) by the time
internal_ao2_ref uses INTERNAL_OBJ.
internal_ao2_ref now returns -1 if INTERNAL_OBJ encouters a bad magic number.
(issue #17037)
Reported by: alecdavis
Patches:
bug17037.diff.txt uploaded by alecdavis (license 585)
Tested by: alecdavis
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@253490 65c4cc65-6c06-0410-ace0-fbb531ad65f3
On Linux (glibc), regcomp() does not return an error for an empty string.
However, the version on OSX will return an error. The test for channel group
matching by regex now passes on the mac, as well.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@252241 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change basically reverts the change reviewed in
https://reviewboard.asterisk.org/r/374/ and instead limits the
updating of the RTP synchronization source to only those times when we
detect that the other side of the conversation has changed the ssrc.
The problem is that SRCUPDATE control frames are sent many times where
we don't want a new ssrc, including whenever Asterisk has to send DTMF
in a normal bridge. This is also not the first time that this mistake
has been made. The initial implementation of the ast_rtp_new_source
function also changed the ssrc--and then it was removed because of
this same issue. Then, we put it back in again to fix a different
issue. This patch attempts to only change the ssrc when we see that
the other side of the conversation has changed the ssrc.
It also renames some functions to make their purpose more clear.
Review: https://reviewboard.asterisk.org/r/540/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@252089 65c4cc65-6c06-0410-ace0-fbb531ad65f3
(Copied from reviewboard)
Tests the following:
1. Basic allocation and setting of string fields.
2. Shrinking a string field and re-expanding it.
3. Growing the last allocation in a string field pool.
4. Setting a string to a large value such that a new string field pool must be
allocated.
In each part, we make sure that the string field is accurate (has the correct
value in it), make sure that the 2 bytes before the string field has the correct
capacity for the field, and for tests 2-4, we make sure that the string field is
where we expect it to be in memory.
Also tested:
5. Shrinking a string field and partially re-expanding it.
6. Setting strings in such a way as to create three separate string field pools
and then removing the middle pool.
There is a bug fix in the init function, which ensures the embedded_pool is set
to NULL which is important for stack allocated structures.
Review: https://reviewboard.asterisk.org/r/185/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@251736 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The patch ensures that if a peer does not exist, parking settings are read from
the channel. A unit test has been written to ensure proper operation for both
standard parking and parking using masquerades.
(closes issue #16592)
Reported by: mwyres
Patches:
bug_16592.diff uploaded by snuffy (license 35)
Review: https://reviewboard.asterisk.org/r/539/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@251679 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Three changes made here:
1) Do not fail if a previous log does not exist (in fact, this is probably
expected).
2) Ensure that the file descriptor to write to gets assigned properly. I am at
a loss as to why assigning safe_fd outside the if fixes this, but it makes
the if statement slightly less complicated anyway.
3) Move up the failure message so that the errno of the failure is not
overwritten by fclose.
(closes issue #16917)
Reported by: Artem
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@251631 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Only chan_dahdi set a value in cdrflags. Everyone else just copied it
around the system. Noone cared about any value it may have contained.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@250565 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When configuring the adaptive jitterbuffer, the target_extra
value not only could not be set from the configuration, but was
not even being set to its proper default. This value is required
in order for the adaptive jitterbuffer to work correctly. To resolve
this a config option has been added to expose this value to the conf
files, and a default value is provided when no config specific value
is present.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@249893 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r248859 | tilghman | 2010-02-25 15:21:05 -0600 (Thu, 25 Feb 2010) | 15 lines
Some platforms clear /var/run at boot, which makes connecting a remote console... difficult.
Previously, we only created the default /var/run/asterisk directory at install
time. While we could create it in the init script, that would not work for
those who start asterisk manually from the command line. So the safest thing
to do is to create it as part of the Asterisk boot process. This also changes
the ownership of the directory, because the pid and ctl files are created after
we setuid/setgid.
(closes issue #16802)
Reported by: Brian
Patches:
20100224__issue16802.diff.txt uploaded by tilghman (license 14)
Tested by: tzafrir
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@248861 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Consider the following scenario:
/-- B
A == * == Network
\-- C
Party B calls party A (EuroISDN BRI phone)
Party A puts B on hold using the HOLD/RETRIEVE messages.
Party A calls party C.
Party A puts C on hold to talk with party B again.
Party A transfers B to C by hanging up.
The call does not get the opportunity to get re-transferred into the ISDN
network by the native bridge because native bridging is not being
reexamined after the initial transfer.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@247609 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1. The documentation for ast_str_set and ast_str_append state that
the max_len parameter may be -1 in order to limit the size of the
ast_str to its current allocated size. The problem was that the max_len
parameter in all cases was a size_t, which is unsigned. Thus a -1 was
interpreted as UINT_MAX instead of -1. Changing the max_len parameter
to be ssize_t fixed this issue.
2. Once issue 1 was fixed, there was an off-by-one error in the case
where we attempted to write a string larger than the current allotted
size to a string when -1 was passed as the max_len parameter. When trying
to write more than the allotted size, the ast_str's __AST_STR_USED was
set to 1 higher than it should have been. Thanks to Tilghman for quickly
spotting the offending line of code.
Oh, and the unit test that I referenced in the top line of this commit
will be added to reviewboard shortly. Sit tight...
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@247335 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Current support for regex matching was previously only available on the group.
Also, error reporting for regex failures has been added. In addition to this
feature enhancement a unit test has been written to check the regular expression
logic to ensure the count operation is working as expected.
(closes issue #16642)
Reported by: kobaz
Patches:
groupmatch2.patch uploaded by kobaz (license 834)
Review: https://reviewboard.asterisk.org/r/503/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@247295 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This feature allows for parkinglots to be created dynamically within
the dialplan. Thanks to all who were involved with getting this patch
written and tested!
(closes issue #15135)
Reported by: IgorG
Patches:
features.dynamic_park.v3.diff uploaded by IgorG (license 20)
2009090400_dynamicpark.diff.txt uploaded by mvanbaak (license 7)
dynamic_parkinglot.diff uploaded by dvossel (license 671)
Tested by: eliel, IgorG, acunningham, mvanbaak, zktech
Review: https://reviewboard.asterisk.org/r/352/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@247248 65c4cc65-6c06-0410-ace0-fbb531ad65f3
According to the man page for stdarg(3),
"Each invocation of va_copy() must be matched by a
corresponding invocation of va_end() in the same
function."
There were several cases in __ast_str_helper where
va_copy was not matched with a corresponding call
to va_end.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@247076 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Tilghman Lesher
Matthew Nicholson
Sean Bright
Olle Johansson
Jeff Peeler
Mark Michelson
Kevin P. Fleming
Richard Mudgett
Russell Bryant
Eliel C. Sardanons
Paul Belanger
Tzafrir Cohen
David Vossel
Terry Wilson
Leif Madsen
Jason Parker
Julian Lyndon-Smith
Alec L Davis