221 Commits (c7f94e570e5efcb40e7cc0c02de8cc90f0eef1c4)

Author	SHA1	Message	Date
Joshua Colp	637b37fb98	Merge "dtls: Add support for ephemeral DTLS certificates."	8 years ago
Sean Bright	04d3785a79	dtls: Add support for ephemeral DTLS certificates. ... This mimics the behavior of Chrome and Firefox and creates an ephemeral X.509 certificate for each DTLS session. Currently, the only supported key type is ECDSA because of its faster generation time, but other key types can be added in the future as necessary. ASTERISK-27395 Change-Id: I5122e5f4b83c6320cc17407a187fcf491daf30b4	8 years ago
Corey Farrell	606ae3484a	Add missing menuselect dependencies. ... This adds menuselect dependencies for modules that use symbols of other modules. ASTERISK-27390 Change-Id: Ia2d2849f5b87a72af7324a82edc3f283eafb5385	8 years ago
Joshua Colp	9e1fbab382	res_pjsip: Add 'ip' as a valid option to 'identify_by' on endpoint. ... When the identify_by option on an endpoint is set to ip it will only be identified using the res_pjsip_endpoint_identifier_ip module. This ensures that it is not mistakenly matched using the username of the From header. To ensure behavior has not changed the default has been changed to "username,ip" for the identify_by option. ASTERISK-27206 Change-Id: I2170b86a7f7e221b4f00bf14aa1ef1ac5b050bbd	8 years ago
Daniel Tryba	a56316423f	res_pjsip: Prevent "user=phone" being added multiple times to header ... ast_sip_add_usereqphone adds "user=phone" to the header every time is is called without checking whether the param already exists. Preventing this by searching to string representation of header for "user=phone". ASTERISK-26988 #close Change-Id: Ib84383b07254de357dc6a98d91fc1d2c2c3719e6	8 years ago
Jenkins2	1505c1bb09	Merge "res_pjsip_registrar.c: Update remove_existing AOR contact handling."	8 years ago
Richard Mudgett	fb19799b62	res_pjsip_registrar.c: Update remove_existing AOR contact handling. ... When "rewrite_contact" is enabled, the "max_contacts" count option can block re-registrations because the source port from the endpoint can be random. When the re-registration is blocked, the endpoint may give up re-registering and require manual intervention. * The "remove_existing" option now allows a registration to succeed by displacing any existing contacts that now exceed the "max_contacts" count. Any removed contacts are the next to expire. The behaviour change is beneficial when "rewrite_contact" is enabled and "max_contacts" is greater than one. The removed contact is likely the old contact created by "rewrite_contact" that the device is refreshing. ASTERISK-27192 Change-Id: I64c107a10b70db1697d17136051ae6bf22b5314b	8 years ago
Corey Farrell	65399a5eda	res_pjsip: Add REF_DEBUG info to module references. ... This provides better information to REF_DEBUG log for troubleshooting when the system is unable to unload res_pjsip.so during shutdown due to module references. ASTERISK-27306 Change-Id: I63197ad33d1aebe60d12e0a6561718bdc54e4612	8 years ago
Corey Farrell	7d04544986	res_pjsip: Fix issues that prevented shutdown of modules. ... res_pjsip and res_pjsip_session had circular references, preventing both modules from shutting down. * Move session supplement registration to res_pjsip. * Use create internal functions for use by pjsip_message_filter.c. ASTERISK-27306 Change-Id: Ifbd5c19ec848010111afeab2436f9699da06ba6b	8 years ago
George Joseph	d178f497d2	res_pjsip: Filter out non SIP(S) requests ... Incoming requests with non sip(s) URIs in the Request, To, From or Contact URIs are now rejected with PJSIP_SC_UNSUPPORTED_URI_SCHEME (416). This is performed in pjsip_message_filter (formerly pjsip_message_ip_updater) and is done at pjproject's "TRANSPORT" layer before a request can even reach the distributor. URIs read by res_pjsip_outbound_publish from pjsip.conf are now also checked for both length and sip(s) scheme. Those URIs read by outbound registration and aor were already being checked for scheme but their error messages needed to be updated to include scheme failure as well as length failure. Change-Id: Ibb2f9f1d2dc7549da562af4cbd9156c44ffdd460	8 years ago
George Joseph	446d48fd49	res_pjsip: Add handling for incoming unsolicited MWI NOTIFY ... A new endpoint parameter "incoming_mwi_mailbox" allows Asterisk to receive unsolicited MWI NOTIFY requests and make them available to other modules via the stasis message bus. res_pjsip_pubsub has a new handler "pubsub_on_rx_mwi_notify_request" that parses a simple-message-summary body and, if endpoint->incoming_mwi_account is set, calls ast_publish_mwi_state with the voice-message counts from the message. Change-Id: I08bae3d16e77af48fcccc2c936acce8fc0ef0f3c	8 years ago
Richard Mudgett	82f4ade959	res_pjsip: Remove ephemeral registered contacts on transport shutdown. ... The fix for the issue is broken up into three parts. This is part two which handles the server side of REGISTER requests when rewrite_contact is enabled. Any registered reliable transport contact becomes invalid when the transport connection becomes disconnected. * Monitor the rewrite_contact's reliable transport REGISTER contact for shutdown. If it is shutdown then the contact must be removed because it is no longer valid. Otherwise, when the client attempts to re-REGISTER it may be blocked because the invalid contact is there. Also if we try to send a call to the endpoint using the invalid contact then the endpoint is not likely to see the request. The endpoint either won't be listening on that port for new connections or a NAT/firewall will block it. * Prune any rewrite_contact's registered reliable transport contacts on boot. The reliable transport no longer exists so the contact is invalid. * Websockets always rewrite the REGISTER contact address and the transport needs to be monitored for shutdown. * Made the websocket transport set a unique name since that is what we use as the ao2 container key. Otherwise, we would not know which transport we find when one of them shuts down. The names are also used for PJPROJECT debug logging. * Made the websocket transport post the PJSIP_TP_STATE_CONNECTED state event. Now the global keep_alive_interval option, initially idle shutdown timer, and the server REGISTER contact monitor can work on wetsocket transports. * Made the websocket transport set the PJSIP_TP_DIR_INCOMING direction. Now initially idle websockets will automatically shutdown. ASTERISK-27147 Change-Id: I397a5e7d18476830f7ffe1726adf9ee6c15964f4	8 years ago
Richard Mudgett	1dcb92bba8	res_pjsip: PJSIP Transport state monitor refactor. ... The fix for the issue is broken up into three parts. This is part one which refactors the transport state monitor code to allow more modules to be able to monitor transports. * Pull the management of PJPROJECT's transport state callback code from res_pjsip_transport_management.c into res_pjsip. Now other modules can dynamically add and remove themselves from transport monitoring without worrying about breaking PJPROJECT's callback chain. * Add the ability for other modules to get a callback whenever a specific transport is shutdown. ASTERISK-27147 Change-Id: I7d9a31371eb1487c9b7050cf82a9af5180a57912	8 years ago
Torrey Searle	65c560894d	chan_pjsip: add a new function PJSIP_DTMF_MODE ... This function is a replica of SIPDtmfMode, allowing the DTMF mode of a PJSIP call to be modified on a per-call basis ASTERISK-27085 #close Change-Id: I20eef5da3e5d1d3e58b304416bc79683f87e7612	8 years ago
Kevin Harwell	7da6ddda30	res_pjsip: Add "webrtc" configuration option ... This patch creates a new configuration option called "webrtc". When enabled it defaults and enables the following options that are needed in order for webrtc to work in Asterisk: rtcp-mux, use_avpf, ice_support, and use_received_transport=enabled media_encryption=dtls dtls_verify=fingerprint dtls_setup=actpass When "webrtc" is enabled, this patch also parses the "msid" media level attribute from an SDP. It will also appropriately add it onto the outgoing session when applicable. Lastly, when "webrtc" is enabled h264 RTCP FIR feedback frames are now sent. ASTERISK-27119 #close Change-Id: I5ec02e07c5d5b9ad86a34fdf31bf2f9da9aac6fd	8 years ago
Jenkins2	0f45c979a3	Merge "res_rtp_asterisk / res_pjsip: Add support for BUNDLE."	8 years ago
Joshua Colp	065c3005ad	res_rtp_asterisk / res_pjsip: Add support for BUNDLE. ... BUNDLE is a specification used in WebRTC to allow multiple streams to use the same underlying transport. This reduces the number of ICE and DTLS negotiations that has to occur to 1 normally. This change implements this by adding support for it to the RTP SDP module in PJSIP. BUNDLE can be turned on using the "bundle" option and on an offer we will offer to bundle streams together. On an answer we will accept any bundle groups provided. Once accepted each stream is bundled to another RTP instance for transport. For the res_rtp_asterisk changes the ability to bundle an RTP instance to another based on the SSRC received from the remote side has been added. For outgoing traffic if an RTP instance is bundled to another we will use the other RTP instance for any transport related things. For incoming traffic received from the transport instance we look up the correct instance based on the SSRC and use it for any non-transport related data. ASTERISK-27118 Change-Id: I96c0920b9f9aca7382256484765a239017973c11	8 years ago
Benjamin Keith Ford	8f72128e66	res_pjsip: Fix crash with from_user containing invalid characters. ... If the from_user field contains certain characters (like @, {, ^, etc.), PJSIP will return a null value for the URI when attempting to parse it. This causes a crash when trying to dial out through a trunk that contains these invalid characters in its from_user field. This change checks the configuration and ensures that an endpoint will not be created if the from_user contains an invalid character. It also adds a null check to the PJSIP URI parsing as a backup. ASTERISK-27036 #close Reported by: Maxim Vasilev Change-Id: I0396fdb5080604e0bdf1277464d5c8a85db913d0	8 years ago
Jenkins2	d2b32cd009	Merge "chan_pjsip: Fix ability to send UPDATE on COLP"	8 years ago
George Joseph	c0c99c7618	chan_pjsip: Fix ability to send UPDATE on COLP ... When connected_line_method is "invite", we're supposed to determine if the client can support UPDATE and if it can, send UPDATE instead of INVITE to avoid the SDP renegotiation. Not only was pjproject not setting the PJSIP_INV_SUPPORT_UPDATE flag, we were testing that invite_tsx wasn't NULL which isn't always the case. * Updated chan_pjsip/update_connected_line_information to drop the requirement that invite_tsx isn't NULL. * Submitted patch to pjproject sip_inv.c that sets the PJSIP_INV_SUPPORT_UPDATE flag correctly. * Updated pjsip.conf.sample to clarify what happens when "invite" is specified. ASTERISK-27095 Change-Id: Ic2381b3567b8052c616d96fbe79564c530e81560	8 years ago
Torrey Searle	fb7247c57c	res_pjsip: Add DTMF INFO Failback mode ... The existing auto dtmf mode reverts to inband if 4733 fails to be negotiated. This patch adds a new mode auto_info which will switch to INFO instead of inband if 4733 is not available. ASTERISK-27066 #close Change-Id: Id185b11e84afd9191a2f269e8443019047765e91	8 years ago
Mark Michelson	45df25a579	chan_pjsip: Add support for multiple streams of the same type. ... The stream topology (list of streams and order) is now stored with the configured PJSIP endpoints and used during the negotiation process. Media negotiation state information has been changed to be stored in a separate object. Two of these objects exist at any one time on a session. The active media state information is what was previously negotiated and the pending media state information is what the media state will become if negotiation succeeds. Streams and other state information is stored in this object using the index (or position) of each individual stream for easy lookup. The ability for a media type handler to specify a callback for writing has been added as well as the ability to add file descriptors with a callback which is invoked when data is available to be read on them. This allows media logic to live outside of the chan_pjsip module. Direct media has been changed so that only the first audio and video stream are directly connected. In the future once the RTP engine glue API has been updated to know about streams each individual stream can be directly connected as appropriate. Media negotiation itself will currently answer all the provided streams on an offer within configured limits and on an offer will use the topology created as a result of the disallow/allow codec lines. If a stream has been removed or declined we will now mark it as such within the resulting SDP. Applications can now also request that the stream topology change. If we are told to do so we will limit any provided formats to the ones configured on the endpoint and send a re-invite with the new topology. Two new configuration options have also been added to PJSIP endpoints: max_audio_streams: determines the maximum number of audio streams to offer/accept from an endpoint. Defaults to 1. max_video_streams: determines the maximum number of video streams to offer/accept from an endpoint. Defaults to 1. ASTERISK-27076 Change-Id: I8afd8dd2eb538806a39b887af0abd046266e14c7	8 years ago
Alexei Gradinari	7a46309d3d	res_pjsip: New endpoint option "notify_early_inuse_ringing" ... This option was added to control whether to notify dialog-info state 'early' or 'confirmed' on Ringing when already INUSE. The value "yes" is useful for some SIP phones (Cisco SPA) to be able to indicate and pick up ringing devices. ASTERISK-26919 #close Change-Id: Ie050bc30023543c7dfb4365c5be3ce58c738c711	8 years ago
Joshua Colp	861984eac0	res_pjsip: Add support for returning only reachable contacts and use it. ... This introduces the ability for PJSIP code to specify filtering flags when retrieving PJSIP contacts. The first flag for use causes the query code to only retrieve contacts that are not unreachable. This change has been leveraged by both the Dial() process and the PJSIP_DIAL_CONTACTS dialplan function so they will now only attempt calls to contacts which are not unreachable. ASTERISK-26281 Change-Id: I8233b4faa21ba3db114f5a42e946e4b191446f6c	8 years ago
Alexei Gradinari	808f299808	res_pjsip: New endpoint option "refer_blind_progress" ... This option was added to turn off notifying the progress details on Blind Transfer. If this option is not set then the chan_pjsip will send NOTIFY "200 OK" immediately after "202 Accepted". Some SIP phones like Mitel/Aastra or Snom keep the line busy until receive "200 OK". ASTERISK-26333 #close Change-Id: Id606fbff2e02e967c02138457badc399144720f2	9 years ago
Kevin Harwell	c6b757fa05	res_pjsip/res_pjsip_callerid: NULL check on caller id name string ... It's possible for a name in a party id structure to be marked as valid, but the name string itself be NULL (for instance this is possible to do by using the dialplan CALLERID function). There were a couple of places where the name was validated, but the string itself was not checked before passing it to functions like 'strlen'. This of course caused a crashed. This patch adds in a NULL check before attempting to pass it into a function that is not NULL tolerant. ASTERISK-25823 #close Change-Id: Iaa6ffe9d92f598fe9e3c8ae373fadbe3dfbf1d4a	9 years ago
Richard Begg	6b7697ed48	res_pjsip_session: Enable RFC3578 overlap dialing support. ... Support for RFC3578 overlap dialling (i.e. 484 Response to partially matched destinations) as currently provided by chan_sip is missing from res_pjsip. This patch adds a new endpoint attribute (allow_overlap) [defaults to yes] which when set to yes enables 484 responses to partial destination matches rather than the current 404. ASTERISK-26864 Change-Id: Iea444da3ee7c7d4f1fde1d01d138a3d7b0fe40f6	9 years ago
George Joseph	5013d8f5d3	res_pjsip: Symmetric transports ... A new transport parameter 'symmetric_transport' has been added. When a request from a dynamic contact comes in on a transport with this option set to 'yes', the transport name will be saved and used for subsequent outgoing requests like OPTIONS, NOTIFY and INVITE. It's saved as a contact uri parameter named 'x-ast-txp' and will display with the contact uri in CLI, AMI, and ARI output. On the outgoing request, if a transport wasn't explicitly set on the endpoint AND the request URI is not a hostname, the saved transport will be used and the 'x-ast-txp' parameter stripped from the outgoing packet. * config_transport was modified to accept and store the new parameter. * config_transport/transport_apply was updated to store the transport name in the pjsip_transport->info field using the pjsip_transport->pool on UDP transports. * A 'multihomed_on_rx_message' function was added to pjsip_message_ip_updater that, for incoming requests, retrieves the transport name from pjsip_transport->info and retrieves the transport. If transport->symmetric_transport is set, an 'x-ast-txp' uri parameter containing the transport name is added to the incoming Contact header. * An 'ast_sip_get_transport_name' function was added to res_pjsip. It takes an ast_sip_endpoint and a pjsip_sip_uri and returns a transport name if endpoint->transport is set or if there's an 'x-ast-txp' parameter on the uri and the uri host is an ipv4 or ipv6 address. Otherwise it returns NULL. * An 'ast_sip_dlg_set_transport' function was added to res_pjsip which takes an ast_sip_endpoint, a pjsip_dialog, and an optional pjsip_tpselector. It calls ast_sip_get_transport_name() and if a non-NULL is returned, sets the selector and sets the transport on the dialog. If a selector was passed in, it's updated. * res_pjsip/ast_sip_create_dialog_uac and ast_sip_create_dialog_uas were modified to call ast_sip_dlg_set_transport() instead of their original logic. * res_pjsip/create_out_of_dialog_request was modified to call ast_sip_get_transport_name() and pjsip_tx_data_set_transport() instead of its original logic. * Existing transport logic was removed from endpt_send_request since that can only be called after a create_out_of_dialog_request. * res_pjsip/ast_sip_create_rdata was converted to a wrapper around a new 'ast_sip_create_rdata_with_contact' function which allows a contact_uri to be specified in addition to the existing parameters. (See below) * res_pjsip_pubsub/internal_pjsip_evsub_send_request was eliminated since all it did was transport selection and that is now done in ast_sip_create_dialog_uac and ast_sip_create_dialog_uas. * 'contact_uri' was added to subscription_persistence. This was necessary because although the parsed rdata contact header has the x-ast-txp parameter added (if appropriate), subscription_persistence_update stores the raw packet which doesn't have it. subscription_persistence_recreate was then updated to call ast_sip_create_rdata_with_contact with the persisted contact_uri so the recreated subscription has the correct transport info to send the NOTIFYs. * res_pjsip_session/internal_pjsip_inv_send_msg was eliminated since all it did was transport selection and that is now done in ast_sip_create_dialog_uac. * pjsip_message_ip_updater/multihomed_on_tx_message was updated to remove all traces of the x-ast-txp parameter from the outgoing headers. NOTE: This change does NOT modify the behavior of permanent contacts specified on an aor. To do so would require that the permanent contact's contact uri be updated with the x-ast-txp parameter and the aor sorcery object updated. If we need to persue this, we need to think about cloning permanent contacts into the same store as the dynamic ones on an aor load so they can be updated without disturbing the originally configured value. You CAN add the x-ast-txp parameter to a permanent contact's uri but it would be much simpler to just set endpoint->transport. Change-Id: I4ee1f51473da32ca54b877cd158523efcef9655f	9 years ago
Mark Michelson	10fa49e327	Add rtcp-mux support ... This commit adds support for RFC 5761: Multiplexing RTP Data and Control Packets on a Single Port. Specifically, it enables the feature when using chan_pjsip. A new option, "rtcp_mux" has been added to endpoint configuration in pjsip.conf. If set, then Asterisk will attempt to use rtcp-mux with whatever it communicates with. Asterisk follows the rules set forth in RFC 5761 with regards to falling back to standard RTCP behavior if the far end does not indicate support for rtcp-mux. The lion's share of the changes in this commit are in res_rtp_asterisk.c. This is because it was pretty much hard wired to have an RTP and an RTCP transport. The strategy used here is that when rtcp-mux is enabled, the current RTCP transport and its trappings (such as DTLS SSL session) are freed, and the RTCP session instead just mooches off the RTP session. This leads to a lot of specialized if statements throughout. ASTERISK-26732 #close Reported by Dan Jenkins Change-Id: If46a93ba1282418d2803e3fd7869374da8b77ab5	9 years ago
Joshua Colp	4e3b0cedba	res_pjsip_transport_websocket: Add support for IPv6. ... This change adds a PJSIP patch (which has been contributed upstream) to allow the registration of IPv6 transport types. Using this the res_pjsip_transport_websocket module now registers an IPv6 Websocket transport and uses it for the corresponding traffic. ASTERISK-26685 Change-Id: Id1f9126f995b31dc38db8fdb58afd289b4ad1647	9 years ago
Joshua Colp	2046743938	config: Improve documentation and behavior of outbound_proxy option. ... This change updates the documentation for the outbound_proxy option to ensure it is consistently stated that a full SIP URI must be provided for the option. The res_pjsip_outbound_registration module has also been changed so that the provided outbound_proxy value is checked to ensure it is a URI and if not an error is output stating so. ASTERISK-26782 Change-Id: I6c239a32274846fd44e65b44ad9bf6373479b593	9 years ago
George Joseph	a537dae6d0	pjproject_bundled: Update for pjproject 2.6 ... * Removed all 2.5.5 functional patches. * Updated usages of pj_release_pool to be "safe". * Updated configure options to disable webrtc. * Updated config_site.h to disable webrtc in pjmedia. * Added Richard Mudgett's recent resolver patches. Change-Id: Ib400cc4dfca68b3d07ce14d314e829bfddc252c7	9 years ago
Richard Mudgett	0b660c9989	res_pjsip: Update authentication realm documentation. ... Using the same auth section for inbound and outbound authentication is not recommended. There is a difference in meaning for an empty realm setting between inbound and outbound authentication uses. An empty inbound auth realm represents the global section's default_realm value when the authentication object is used to challenge an incoming request. An empty outgoing auth realm is treated as a don't care wildcard when the authentication object is used to respond to an incoming authentication challenge. ASTERISK-26799 Change-Id: Id3952f7cfa1b6683b9954f2c5d2352d2f11059ce	9 years ago
Richard Mudgett	07abb39d6a	res_pjsip.c: Fix inconsistency between warning and action. ... The original return value corresponded to AST_SIP_AUTHENTICATION_CHALLENGE but we have no authenticator registered to create the challenge. Change-Id: I62368180d774b497411b80fbaabd0c80841f8512	9 years ago
Mark Michelson	46147a8f30	Revert "Update qualifies when AOR configuration changes." ... This reverts commit 6492e91392. The change in question was intended to prevent the need to reload in order to update qualifies on contacts when an AOR changes. However, this ended up causing a deadlock instead. Change-Id: I1a835c90a5bb65b6dc3a1e94cddc12a4afc3d71e	9 years ago
Richard Mudgett	b47cf1a7d6	res_pjsip: Fix some off nominal tdata leaks. ... Change-Id: I243a4be5e7fbfe604923764969c4ee04eee89b9d	9 years ago
Joshua Colp	e63635b578	Merge "Update qualifies when AOR configuration changes."	9 years ago
Mark Michelson	bbed75c3ba	Update qualifies when AOR configuration changes. ... Prior to this change, qualifies would only update in the following cases: * A reload of res_pjsip.so was issued. * A dynamic contact was re-registered after its AOR's qualify_frequency had been changed This does not work well if you are using realtime for your AORs. You can update your database to have a new qualify_frequency, but the permanent contacts on that AOR will not have their qualifies updated. And the dynamic contacts on that AOR will not have their qualifies updated until the next registration, which could be a long time. This change seeks to fix this problem by making it so that whenever AOR configuration is applied, the contacts pertaining to that AOR have their qualifies updated. Additions from this patch: * AOR sorcery objects now have an apply handler that calls into a newly added function in the OPTIONS code. This causes all contacts associated with that AOR to re-schedule qualifies. * When it is time to qualify a contact, the OPTIONS code checks to see if the AOR can still be retrieved. If not, then qualification is canceled on the contact. Alterations from this patch: * The registrar code no longer updates contact's qualify_frequence and qualify_timeout. There is no point to this since those values already get updated when the AOR changes. * Reloading res_pjsip.so no longer calls the OPTIONS initialization function. Reloading res_pjsip.so results in re-loading AORs, which results in re-scheduling qualifies. Change-Id: I2e7c3316da28f389c45954f24c4e9389abac1121	9 years ago
Joshua Colp	aeea634bc0	res_pjsip: Handle invocation of callback on outgoing request when error occurs. ... There are some error cases in PJSIP when sending a request that will result in the callback for the request being invoked. The code did not handle this case and assumed on every error case that the callback was not invoked. The code has been changed to check whether the callback has been invoked and if so to absorb the error and treat it as a success. ASTERISK-26679 ASTERISK-26699 Change-Id: I563982ba204da5aa1428989a11c06dd9087fea91	9 years ago
Joshua Elson	386e3a01b3	res_pjsip: Fix known compact header issues ... ASTERISK-26684 #close Change-Id: Ifd7e401c45015119dd5e8421dbfe3afa6381744a	9 years ago
Richard Mudgett	45a5e2abc6	res_pjsip: Add/update ERROR msg if invalid URI. ... ASTERISK-24499 Change-Id: Ie305153e47e922233b2ff24715e0e326e5fa3a6c	9 years ago
George Joseph	79b09b5f18	res_pjsip_registrar: AMI Add RegistrationInboundContactStatuses command ... The PJSIPShowRegistrationsInbound AMI command was just dumping out all AORs which was pretty useless and resource heavy since it had to get all endpoints, then all aors for each endpoint, then all contacts for each aor. PJSIPShowRegistrationInboundContactStatuses sends ContactStatusDetail events which meets the intended purpose of the other command and has significantly less overhead. Also, some additional fields that were added to Contact since the original creation of the ContactStatusDetail event have been added to the end of the event. For compatibility purposes, PJSIPShowRegistrationsInbound is left intact. ASTERISK-26644 #close Change-Id: I326f12c9ecb52bf37ba03f0748749de4da01490a	9 years ago
Matt Jordan	a3f48be0da	res/res_pjsip: Fix documentation whitespace issues ... Tabs > Spaces. Change-Id: If1e43a71822615a898e958e0f8b2e882606f0bd0	9 years ago
Joshua Colp	d1739bcf07	Merge "res_pjsip.c: Rework endpt_send_request() req_wrapper code."	9 years ago
Richard Mudgett	338f35edcc	res_pjsip.c: Rework endpt_send_request() req_wrapper code. ... * Don't hold the req_wrapper lock too long in endpt_send_request(). We could block the PJSIP monitor thread if the timeout timer expires. sip_get_tpselector_from_endpoint() does a sorcery access that could take awhile accessing a database. pjsip_endpt_send_request() might take awhile if selecting a transport. * Shorten the time that the req_wrapper lock is held in the callback functions. * Simplify endpt_send_request() req_wrapper->timeout code. * Removed some redundant req_wrapper->timeout_timer->id assignments. Change-Id: I3195e3a8e0207bb8e7f49060ad2742cf21a6e4c9	9 years ago
Richard Mudgett	bb196323f9	res_pjsip: Fix tdata leaks in off nominal paths. ... Change-Id: Ie83e06e88c2d60157775263b07e40b61718ac97b	9 years ago
Joshua Colp	aed6c219a3	pjsip: Fix a few media bugs with reinvites and asymmetric payloads. ... When channel format changes occurred as a result of an RTP re-negotiation the bridge was not informed this had happened. As a result the bridge technology was not re-evaluated and the channel may have been in a bridge technology that was incompatible with its formats. The bridge is now unbridged and the technology re-evaluated when this occurs. The chan_pjsip module also allowed asymmetric codecs for sending and receiving. This did not work with all devices and caused one way audio problems. The default has been changed to NOT do this but to match the sending codec to the receiving codec. For users who want asymmetric codecs an option has been added, asymmetric_rtp_codec, which will return chan_pjsip to the previous behavior. The codecs returned by the chan_pjsip module when queried by the bridge_native_rtp module were also not reflective of the actual negotiated codecs. The nativeformats are now returned as they reflect the actual negotiated codecs. ASTERISK-26423 #close Change-Id: I6ec88c6e3912f52c334f1a26983ccb8f267020dc	9 years ago
Joshua Colp	403c4f5833	pjsip: Support dual stack automatically. ... This change adds support for dual stack automatically. No configuration is required and the IP address and version in the SIP messages and SDP will be automatically changed based on the transport over which the message is being sent. RTP usage has also been changed to listen on both IPv4 and IPv6 simultaneously to allow media to flow, and to allow ICE support on both simultaneously. This also allows failover between IPv6 and IPv4 to work as expected. ASTERISK-26309 #close Change-Id: I235a421d8f9a326606d861b449fa6fe3a030572d	9 years ago
zuul	cbd6f7001e	Merge "res_pjsip: Add ignore_uri_user_options option."	9 years ago
Joshua Colp	e3487b9360	res_pjsip: Don't assume a request will have any addresses. ... When performing DNS resolution the failover code present in res_pjsip currently assumes that a request will always have at least one viable address. In practice this is not true. A domain may be used that has no records. The code now checks that at least one address exists on the request which prevents looping. ASTERISK-26364 #close Change-Id: Ic0761b0264864acd85915c94d878a81624940f4c	9 years ago