23700 Commits (c67a06a2ff87ffd1dd3607866d965ef3caabe232)

 

All Branches   

Search

Author	SHA1	Message	Date
Michael L. Young	e9bcf9826a	Fix FastAGI To Properly Check For A Connection ... When IPv6 support was added to FastAGI, the intent was to have the ability to check all addresses resolved for a host since we might receive an IPv4 address and an IPv6 address. The problem with the current code, is that, since we are doing O_NONBLOCK, we get EINPROGRESS when calling ast_connect() but are ignoring this instead of handling it. We break out of the loop and continue on. When we later call ast_poll(), it succeeds but we never check if we have a connection or not on the socket level. We then attempt to send data to the host address that we think is setup and it fails. We then check the errno and see that we have "connection refused" and then return with agi failed. This patch does the following: * Handles EINPROGRESS by creating the function handle_connection() - ast_poll() was moved into this function - This function checks the results of the connection on the socket level after calling ast_poll() * Continues to the next address if the above fails to create a connection * Once all addresses resolved are tried and we still are unable to establish a connection, then we return that the FastAGI call failed (closes issue ASTERISK-21065) Reported by: Jeremy Kister Tested by: Jeremy Kister, Michael L. Young Patches: asterisk-21065_poll_correctly_v4.diff Michael L. Young (license 5026) Review: https://reviewboard.asterisk.org/r/2330/ ........ Merged revisions 381893 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381894 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Jonathan Rose	abfb23df6b	app_dial: Honor the 'c' flag when the calling party hangs up ... Apparently this feature became broken in 11, probably as a result of the Hangup Cause project. (closes issue ASTERISK-21113) Reprted by: Heiko Wundram Patches: app_dial.patch uploaded by Heiko Wundram (license 5822) ........ Merged revisions 381880 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381881 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Matthew Jordan	a3b138429f	Properly detect launchd ... Asterisk was a little too pro-active in claiming that it found launchd. On systems without launchd - such as FreeBSD - this resulted in certain items in Asterisk that conflict with launchd to not be selectable, such as res_timing_kqueue. (closes issue ASTERISK-20749) Reported by: Oleg Baranov ........ Merged revisions 381847 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 381848 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381869 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Kevin Harwell	5e9994ed9c	Write the correct callid to the data1 field in queue_log for transfer events. ... The incorrect callid was being written to the "data1" field in queue_log table for transfer events. The callid of the queue was being written instead of the transfer target's callid. This now gets the correct "transfer to" number and places that in the "data1" field of the queue_log table when a transfer event is triggered. (closes issue ASTERISK-19960) Reported by: vladimir shmagin ........ Merged revisions 381770 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 381791 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381792 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Michael L. Young	d1f8e338b0	Add The Status Of A Module To The Output Of "CLI> module show" ... When a module's configuration is not loadable, we still load the module but it is not in a running state. When trying to troubleshoot, let's say, why chan_motif is ignoring inbound XMPP traffic, there is no way to indicate that a loaded module is not currently running. (closes issue ASTERISK-21108) Reported by: Rusty Newton Tested by: Michael L. Young Patches: asterisk-21108_add_status-v2.diff Michael L. Young (license 5026) Review: https://reviewboard.asterisk.org/r/2331/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381749 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Kevin Harwell	f277460670	Confbridge channels staying active when all participants leave. ... If you started/stopped recording of a conference multiple times channels would remain active even when all participants left the conference. This was due to the fact that a reference to the confbridge was being added every time a start record command was issued, but when the recording was stopped there was no matching de-reference thus keeping the conference alive. Made sure only a single reference is added for the record thread no matter how many times recording is started/stopped. A de-reference is issued upon thread ending. Note, this issue is being fixed under AST-1088 since it relates to it and should have been corrected along with those modifications. (issue AST-1088) Reported by: John Bigelow ........ Merged revisions 381737 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381741 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Kevin Harwell	31b7426115	Added Confbridge record_file_append option. ... Currently, if one starts, stops, and then starts a recording again for a conference the recorded data is appended to the file originally created on the first record start. An option record_file_append has been added that defaults to "yes", but when set to "no" will force creation of a new file between every record start/stop. (issue AST-1088) Reported by: John Bigelow Review: http://reviewboard.digium.internal/r/374/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381729 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Damien Wedhorn	0d553eece8	Add serviceURL stuff to skinny. ... Patch adds all the packet and structure stuff to skinny to enable setting service URLs in skinny, such as corporate directories. This stuff is only relevant during load/unload as when activated. Also some minor changes removing duplicated counting of addons and speedials in handle_skinny_show_devices. Review: https://reviewboard.asterisk.org/r/2321/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381718 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Damien Wedhorn	96025d5dfc	Fixup skinny CLI completion. ... Auto complete for skinny debug allows multiple options and negation, also add debug all option. Usage example: 'skinny debug all -packets' (each can be autocompleted including -packet). Change show device to use device name. Remove the duplicate ast_strdup's from place calling device complete return immediately from complete devicename and complete linename so that multiple options are displayed on the CLI if more than one option available. Review: https://reviewboard.asterisk.org/r/2333/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381717 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Kevin Harwell	4c76dbc8b2	Fixed Confbridge file recording deadlock and appending. ... A deadlock occurred after starting/stopping and then restarting a confbridge recording. Upon starting a recording a record thread is created that holds a lock until just before exiting. Stopping the recording does not stop/exit the thread or release the lock. The thread waits until recording begins again. Starting a stopped recording signals the thread to continue and start recording again. However restarting the recording also created another record thread resulting in a deadlock. The fix was to make sure the record thread was only created once. Also it was noted that filenames for the recordings were being concatenated for each start/stop. This was fixed by creating a new file for each conference session and appending the actual recorded data within the file (e.g. passing the 'a' option to MixMonitor). (issue AST-1088) Reported by: John Bigelow Review: http://reviewboard.digium.internal/r/374/ ........ Merged revisions 381702 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381703 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Walter Doekes	d4d1d10307	Remove "registertrying" and add "rtp_engine" from/to sip.conf.sample ... The "registertrying" option was removed in r343220. The "rtp_engine" option was added in r186078 but erroneously named "engine" in the sample. Note that there is no global sip setting for a different engine. ........ Merged revisions 381668 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 381669 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381670 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Jonathan Rose	d7a616c945	PRESENCE_STATE: Provide better documentation for the 'e' option. ... Notes that the 'e' option actually decodes data when used as a write function such as with the SET application while it encodes data when used to read. Review: https://reviewboard.asterisk.org/r/2335/ ........ Merged revisions 381655 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381656 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Richard Mudgett	aac24e03aa	confbridge: Add flags column to CLI "confbridge list <conference>" ... * Added the following flags to the CLI "confbridge list <conference>" output: A - The user is an admin M - The user is a marked user W - The user must wait for a marked user to join E - The user will be kicked after the last marked user leaves the conference w - The user is waiting for a marked user to join * Added the following header to the AMI ConfbridgeList events: WaitMarked, EndMarked, and Waiting. (closes issue AST-1101) Reported by: John Bigelow Patches: confbridge-show-admin3.txt (license #5091) patch uploaded by John Bigelow Modified git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381644 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Richard Mudgett	041f958e38	confbridge: Rename i iterator variables to iter. ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381628 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Matthew Jordan	2ebb9863ea	Don't send presencestate information if the state is invalid ... Previously, presencestate information was sent whenever the state was not NOT_SET. When r381594 actually returned INVALID presence state in all the places it was supposed to, it caused chan_sip to start adding presence state information to NOTIFY requests that it previously would not have added. chan_sip shouldn't be adding presence state information when the provider is in an invalid state; users can't set the state to invalid and an invalid state always implies that the provider is in an error condition. (issue AST-1084) ........ Merged revisions 381613 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381615 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Joshua Colp	cce1c9547f	Add support for retrieving multiple objects from sorcery using a regex on their id. ... Review: https://reviewboard.asterisk.org/r/2329/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381614 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Matthew Jordan	c209e85ad3	Fix crash in PresenceState AMI action when specifying an invalid provider ... This patch fixes a crash in Asterisk that could be caused by using the PresenceState AMI action while providing an invalid provider. This patch also adds some additional warnings when a user attempts to provide the PresenceState action with invalid data, and removes some NOTICE statements that were still lurking in the code from testing. (closes issue AST-1084) Reported by: John Bigelow Tested by: John Bigelow ........ Merged revisions 381594 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381595 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Mark Michelson	8a7dd2f408	Fix a crash that occurred when a BYE was received on a replaced dialog. ... Reference counting for the channel and its tech_pvt got messed up at some point between 1.8 and 11. The result was that if a BYE for a dialog that had been replaced (via an INVITE with Replaces) was received, Asterisk would crash due to trying to access data on a channel that was no longer there. The fix I introduced is to remove code that both unrefs the sip_pvt and sets the channel's tech_pvt to NULL when an INVITE with Replaces is handled. This way when a BYE is received, the tech_pvt will be non-NULL and so the BYE can be processed and not cause a crash. (closes issue ASTERISK-20929) reported by Kristopher Lalletti patches: ASTERISK-20929.patch uploaded by Mark Michelson (License #5049) ........ Merged revisions 381566 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381568 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Matthew Jordan	e123ee2d77	Disable strict XML documentation config checking; fix crash caused by sorcery ... This patch does two things: 1. It disables (temporarily) strict XML documentation checking for module configurations. We should re-enable it before making any release from trunk. 2. Pass the module flag AST_MODULE through sorcery. This means several of the API calls are now macros and will do this automatically for you. The config framework needs the module that objects are registering to so it can properly construct the documentation. (This was already a required field, but sorcery was getting by without it) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381567 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Kevin Harwell	71bce17720	Stopped spamming of debug messages during attended transfer. ... While autoservice is running and servicing a channel the callid is being stored and removed in the thread's local storage for each iteration of the thread loop. If debug was set to a sufficient level the log file would be spammed with callid thread local storage debug messages. Added a new function that checks to see if the callid to be stored is different than what is already contained (if anything). If it is different then store/replace and log, otherwise just leave as is. Also made it so all logging of debug messages pertaining to the callid thread storage outputs only when TEST_FRAMEWORK is defined. (issue ASTERISK-21014) (closes issue ASTERISK-21014) Report by: Rusty Newton Review: https://reviewboard.asterisk.org/r/2324/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381557 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Jonathan Rose	f008baddac	chan_sip: Use video and text crypto attributes to append RTP profiles to SDP ... Some bad copy/pasting resulted in using the audio crypto attribute for both text and video RTP. Also the audio crypto isn't set until after these, so it was really just bad all around. (closes ASTERISK-20905) Reported by: Kristopher Lalletti patches: rtp_crypto_video_text.diff uploaded by Jonathan Rose (license 6182) ........ Merged revisions 381553 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381556 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Matthew Jordan	32e8b02f8f	Remove automerge propertrties added in r381527 ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381543 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Matthew Jordan	d04ab3c645	Add CLI configuration documentation ... This patch allows a module to define its configuration in XML in source, such that it can be parsed by the XML documentation engine. Documentation is generated in a two-pass approach: 1. The documentation is first generated from the XML pulled from the source 2. The documentation is then enhanced by the registration of configuration options that use the configuration framework This patch include configuration documentation for the following modules: * chan_motif * res_xmpp * app_confbridge * app_skel * udptl Two new CLI commands have been added: * config show help - show configuration help by module, category, and item * xmldoc dump - dump the in-memory representation of the XML documentation to a new XML file. Review: https://reviewboard.asterisk.org/r/2278 Review: https://reviewboard.asterisk.org/r/2058 patches: on review 2058 uploaded by twilson git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381527 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Damien Wedhorn	edf0483f4f	Remove extraneous stuff from r381470. ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381471 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Damien Wedhorn	ce8101c6c6	Add back sending dialnumber to skinny. ... Don't know why it seemed to work during testing, but it really is needed for protocol v17 (and probably above). git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381470 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Richard Mudgett	d3811a2352	End stuck DTMF if AST_SOFTHANGUP_ASYNCGOTO because it isn't a real hangup. ... It doesn't hurt to check AST_SOFTHANGUP_UNBRIDGE either, but it should not be set outside of a bridge. (issue ASTERISK-20492) ........ Merged revisions 381466 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 381467 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381469 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Damien Wedhorn	fffcdb0361	Respect callerid presentation in skinny. ... Fix chan_skinny so that it respects callerID presentation of inbound calls to device and a couple of other minor fixes: 145 packet (add OCTAL_FROM amd callerid), and dont send dialednumber message if protocol >= 17. (closes issue ASTERISK-21066) Reported by: snuffy Tested by: snuffy, myself Patches: skinny-respect-clid-restrictions-v2.diff uploaded by snuffy (license 5024) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381465 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Kinsey Moore	2e1e0735fe	Revamp of terminal color codes ... The core module related to coloring terminal output was old and needed some love. The main thing here was an attempt to get rid of the obscene number of stack-local buffers that were allocated for no other reason than to colorize some output. Instead, this uses a simple trick to allocate several buffers within threadlocal storage, then automatically rotates between them, so that you can make multiple calls to the colorization routine within one function and not need to allocate multiple buffers. Review: https://reviewboard.asterisk.org/r/2241/ Patches: bug.patch uploaded by Tilghman Lesher git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381448 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Sean Bright	86a537c271	Use a shuffling algorithm to find unused IAX2 call numbers. ... While adding red-black tree containers to astobj2 in r376575, Richard pointed out the way chan_iax2 finds unused call numbers will prevent ao2_container integrity checks at runtime. This patch removes the ao2_container and instead uses fixed sized arrays and a modified Fisher-Yates-Durstenfeld shuffle to maintain the call number list. While the locking semantics are similar to the ao2_container implementation, this implementation should be faster and more memory efficient. Review: https://reviewboard.asterisk.org/r/2288/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381427 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Sean Bright	064c65d5a2	Update the name of the update_tags utility in the git mirror how-to. ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381398 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Matthew Jordan	6b4d628afd	Don't throw a spurious error when using DBdeltree ... The function call ast_db_deltree returns the number of row deleted, or a negative number if it failed. DBdeltree was treating any non-zero return as an error, causing a spurious verbose error message to be displayed. This patch handles the return code of ast_db_deltree correctly. (closes issue ASTERISK-21070) Reported by: ianc patches: dbdeltree.diff uploaded by ianc (License #5955) ........ Merged revisions 381364 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 381365 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381366 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
David M. Lee	222e8a3afb	Add a serializer interface to the threadpool ... This patch adds the ability to create a serializer from a thread pool. A serializer is a ast_taskprocessor with the same contract as a default taskprocessor (tasks execute serially) except instead of executing out of a dedicated thread, execution occurs in a thread from a ast_threadpool. Think of it as a lightweight thread. While it guarantees that each task will complete before executing the next, there is no guarantee as to which thread from the pool individual tasks will execute. This normally only matters if your code relys on thread specific information, such as thread locals. This patch also fixes a bug in how the 'was_empty' parameter is computed for the push callback, and gets rid of the unused 'shutting_down' field. Review: https://reviewboard.asterisk.org/r/2323/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381326 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Mark Michelson	e9ff351f06	Do not allow native RTP bridging if packetization of media streams differs. ... The RTP engine will no longer allow for local and remote native RTP bridges if packetization of streams differs. Allowing native bridging in this scenario has been known to cause FAX failures. (closes ASTERISK-20650) Reported by: Maciej Krajewski Patches: ASTERISK-20659.patch uploaded by Mark Michelson (License #5049) Review: https://reviewboard.asterisk.org/r/2319 ........ Merged revisions 381281 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 381306 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381307 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Kinsey Moore	81fa307af7	Fix some more REF_DEBUG-related build errors ... When sip_ref_peer and sip_unref_peer were exported to be usable in channels/sip/security_events.c, modifications to those functions when building under REF_DEBUG were not taken into account. This change moves the necessary defines into sip.h to make them accessible to other parts of chan_sip that need them. ........ Merged revisions 381282 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381285 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Michael L. Young	27867e65d0	Adding Some More Manager Events To ConfBridge ... Currently, ConfBridge does not send manager events for ConfbridgeMute, ConfbridgeUnmute, ConfbridgeStartRecord and ConfbridgeStopRecord. This patch adds these events to the manager. The reporter's patch moves some other events up to the beginning of the file. The patch being committed is based on the patch contributed from the reporter of this issue. I have made a lot of modifications to the patch in order for it to fit in better with what we currently are doing in the code when it comes to manager events. I also made a few changes to the <see-also> elements on some of the events. (closes issue ASTERISK-20827) Reported by: Clint Davis Tested by: Clint Davis, Michael L. Young Patches: 20827.diff uploaded by Clint Davis (license 6453) asterisk-20827-confbridge-events.diff uploaded by Michael L. Young (license 5026) Review: https://reviewboard.asterisk.org/r/2309/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381256 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Kevin Harwell	b607a2dbf9	Properly load say.conf upon reload of module app_playback. ... If say.conf did not exists prior to originally loading module app_playback it would not load on subsequent reloads of the module once it had been created. This occurred because upon reload of the app_playback module it would only load a new configuration if an old one had previously existed. This fix simply removed the association between checking if an old configuration existed and the loading of the new one. (closes issue ASTERISK-20800) Reported by: pgoergler ........ Merged revisions 381216 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 381217 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381219 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Kinsey Moore	b6b9dfb09b	Fix compilation error with REF_DEBUG ... When the red/black tree work was committed, there was an extra ", " in the REF_DEBUG definition of ao2_container_alloc_rbtree. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381218 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
David M. Lee	f2b9c12704	Minor fixes to res_json and test_json. ... * Made input checking more consistent with other Asterisk code * Added validation to ast_json_dump_new_file * Fixed tests for ownereship semantics (issue ASTERISK-20887) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381214 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Damien Wedhorn	98ef0d3215	Fix some issues with skinny callid. ... Add extra string to transmit_callinfo_var, Only set string2 to tonum for outgoing calls and changes to send_callinfo and push_callinfo to not set callid name to last number. (closes issue ASTERISK-21063) Reported by: wedhorn Tested by: snuffy, myself Patches: skinny-callinfoupdate03.diff uploaded by wedhorn (license 5019) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381195 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Richard Mudgett	3d91f97cf9	features: Don't cache a struct ast_app pointer. ... Caching a struct ast_app pointer is not a good idea because someone could unload the application. After the applicaiton unload the cached ast_app pointer is no longer valid. Only pbx.c can cache the pointer because it knows when the application is unloaded and removes the pointer. * Fixed one-touch Monitor and MixMonitor to not cache the ast_app pointer and not use the silly monitor_ok/mixmonitor_ok/stopmixmonitor_ok flags. * Extracted bridge_check_monitor() from ast_bridge_call() and use propper locking. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381177 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Matthew Jordan	4682d32d34	Fix crash in res_xmpp when deleting pubsub node from CLI ... An error existed in res_xmpp where it would attempt to delete attributes from a node that itself was also deleted. Per the iksemel documentation, attributes added using iks_insert are copied to the parent node's stack, and will be reclaimed when that node is itself destroyed. (closes issue ASTERISK-20982) Reported by: marcelloceschia patches: delete-node-fix.diff uploaded by marcelloceschia (License 6036) ........ Merged revisions 381159 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381160 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Joshua Colp	27882b8599	Add additional functionality to the Sorcery API. ... This commit adds native implementation support for copying and diffing objects, as well as the ability to load or reload on a per-object type level. Review: https://reviewboard.asterisk.org/r/2320/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381134 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Richard Mudgett	0e442112ad	pbx: Fix regression caused by taking advantage of the function name sort. ... Taking advantage of the sorted order of the registered functions container requires that they are actually inserted in the expected sort order. * Insert the registered functions into the container in case sensitive position. As a result, only the complete_functions() routine needs to search the entire container because it does a case insensitive search for convenience. Caught by the unit tests. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381118 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Richard Mudgett	1e65035d17	pbx: Make function and application containers take advantage of being sorted. ... * Fixed "core show function" tab completion and token count checking. * Refactored function and application container handling code to reduce redundancy. * Made __ast_pbx_run() return using the defines the caller should expect. Doesn't change the returned values. Just made use the defines. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381102 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Richard Mudgett	5b236ee647	Make ast_do_masquerade() a void function. ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381086 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Richard Mudgett	9da5ef1b91	app_confbridge: Fix crash from receiving an AMI action after ConfBridge unloaded. ... Unloading ConfBridge caused the next AMI action received to crash Asterisk. * Add the missing unregister of AMI action ConfbridgeSetSingleVideoSrc when ConfBridge is unloaded. (closes issue ASTERISK-20994) Reported by: Jeremy Kister Patches: jira_asterisk_20994_v11.patch (license #5621) patch uploaded by rmudgett Tested by: Rusty Newton, Jeremy Kister ........ Merged revisions 381067 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381069 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Jonathan Rose	1a70d513f1	Call Parking: Set PARKINGLOT and PARKINGSLOT variables on all parked calls ... These two variables were previously not being set when comebacktoorigin=yes and the example configs seemed to imply that they should be. Since there is no harm in this and since calls that are sent back to origin are capable of continuing in the dialplan, this seemed like a no-brainer. Also it supports some bridging tests I've been working on. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381068 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Joshua Colp	abd17dc849	Fix a bug where a changed configuration file might not be available to all sorcery object types. ... Since res_sorcery_config used a static name of "res_sorcery_config" to inform the configuration file API that it asked for the configuration file it was possible during a reload for some sorcery object types not to receive the new configuration file. This change introduces a UUID on a per-sorcery config instance basis so that the unchanged state is kept on an instance basis and not for the res_sorcery_config module as a whole. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381037 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Kinsey Moore	67102c3d3f	Add aggregate operations for stuctures with string fields ... Add struct-level comparison and copying of string fields to reduce the complexity of whole-struct comparison and copying when using string fields. The new macros do not take into account non-stringfield data. Review: https://reviewboard.asterisk.org/r/2308/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381017 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
David M. Lee	345253a50e	Fixed failing test from r380696. ... When I added my extensive suite of session timer unit tests, apparently one of them was failing and I never noticed. If neither Min-SE nor Session-Expires is set in the header, it was responding with a Session-Expires of the global maxmimum instead of the configured max for the endpoint. (issue ASTERISK-20787) ........ Merged revisions 380973 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 380974 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@380977 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago