Channel snapshots have string representations of the channel's native formats.
Prior to this change, the format strings were re-created on ever channel snapshot
creation. Since channel native formats rarely change, this was very wasteful.
Now, string representations of formats may optionally be stored on the ast_format_cap
for cases where string representations may be requested frequently. When formats
are altered, the string cache is marked as invalid. When strings are requested, the
cache validity is checked. If the cache is valid, then the cached strings are copied.
If the cache is invalid, then the string cache is rebuilt and copied, and the cache
is marked as being valid again.
Review: https://reviewboard.asterisk.org/r/2879
........
Merged revisions 400356 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400363 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r399887 | dlee | 2013-09-26 10:41:47 -0500 (Thu, 26 Sep 2013) | 1 line
Minor performance bump by not allocate manager variable struct if we don't need it
........
r400138 | dlee | 2013-09-30 10:24:00 -0500 (Mon, 30 Sep 2013) | 23 lines
Stasis performance improvements
This patch addresses several performance problems that were found in
the initial performance testing of Asterisk 12.
The Stasis dispatch object was allocated as an AO2 object, even though
it has a very confined lifecycle. This was replaced with a straight
ast_malloc().
The Stasis message router was spending an inordinate amount of time
searching hash tables. In this case, most of our routers had 6 or
fewer routes in them to begin with. This was replaced with an array
that's searched linearly for the route.
We more heavily rely on AO2 objects in Asterisk 12, and the memset()
in ao2_ref() actually became noticeable on the profile. This was
#ifdef'ed to only run when AO2_DEBUG was enabled.
After being misled by an erroneous comment in taskprocessor.c during
profiling, the wrong comment was removed.
Review: https://reviewboard.asterisk.org/r/2873/
........
r400178 | dlee | 2013-09-30 13:26:27 -0500 (Mon, 30 Sep 2013) | 24 lines
Taskprocessor optimization; switch Stasis to use taskprocessors
This patch optimizes taskprocessor to use a semaphore for signaling,
which the OS can do a better job at managing contention and waiting
that we can with a mutex and condition.
The taskprocessor execution was also slightly optimized to reduce the
number of locks taken.
The only observable difference in the taskprocessor implementation is
that when the final reference to the taskprocessor goes away, it will
execute all tasks to completion instead of discarding the unexecuted
tasks.
For systems where unnamed semaphores are not supported, a really
simple semaphore implementation is provided. (Which gives identical
performance as the original taskprocessor implementation).
The way we ended up implementing Stasis caused the threadpool to be a
burden instead of a boost to performance. This was switched to just
use taskprocessors directly for subscriptions.
Review: https://reviewboard.asterisk.org/r/2881/
........
r400180 | dlee | 2013-09-30 13:39:34 -0500 (Mon, 30 Sep 2013) | 28 lines
Optimize how Stasis forwards are dispatched
This patch optimizes how forwards are dispatched in Stasis.
Originally, forwards were dispatched as subscriptions that are invoked
on the publishing thread. This did not account for the vast number of
forwards we would end up having in the system, and the amount of work it
would take to walk though the forward subscriptions.
This patch modifies Stasis so that rather than walking the tree of
forwards on every dispatch, when forwards and subscriptions are changed,
the subscriber list for every topic in the tree is changed.
This has a couple of benefits. First, this reduces the workload of
dispatching messages. It also reduces contention when dispatching to
different topics that happen to forward to the same aggregation topic
(as happens with all of the channel, bridge and endpoint topics).
Since forwards are no longer subscriptions, the bulk of this patch is
simply changing stasis_subscription objects to stasis_forward objects
(which, admittedly, I should have done in the first place.)
Since this required me to yet again put in a growing array, I finally
abstracted that out into a set of ast_vector macros in
asterisk/vector.h.
Review: https://reviewboard.asterisk.org/r/2883/
........
r400181 | dlee | 2013-09-30 13:48:57 -0500 (Mon, 30 Sep 2013) | 28 lines
Remove dispatch object allocation from Stasis publishing
While looking for areas for performance improvement, I realized that an
unused feature in Stasis was negatively impacting performance.
When a message is sent to a subscriber, a dispatch object is allocated
for the dispatch, containing the topic the message was published to, the
subscriber the message is being sent to, and the message itself.
The topic is actually unused by any subscriber in Asterisk today. And
the subscriber is associated with the taskprocessor the message is being
dispatched to.
First, this patch removes the unused topic parameter from Stasis
subscription callbacks.
Second, this patch introduces the concept of taskprocessor local data,
data that may be set on a taskprocessor and provided along with the data
pointer when a task is pushed using the ast_taskprocessor_push_local()
call. This allows the task to have both data specific to that
taskprocessor, in addition to data specific to that invocation.
With those two changes, the dispatch object can be removed completely,
and the message is simply refcounted and sent directly to the
taskprocessor.
Review: https://reviewboard.asterisk.org/r/2884/
........
Merged revisions 399887,400138,400178,400180-400181 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400186 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change protects accesses of res_parking such that it can unload
safely once transient uses of its registered functions are complete.
The parking API has been restructured such that its consumers do not
have access to the vtable exposed by the parking provider, but instead
route through stubs to prevent consumers from holding on to function
pointers.
This adds calls to all the parking unload functions and moves
application loading and unloading into functions in
parking_applications.c similar to the rest of the parts of res_parking.
Review: https://reviewboard.asterisk.org/r/2763/
(closes issue ASTERISK-22142)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396890 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This removes unused code, event types, IE pltypes, and event IE types
where possible and makes several functions private that were once
public. This includes a renumbering of the remaining event and IE types
which breaks binary compatibility with previous versions. The last
remaining consumers of the old event system (or parts thereof) are
main/security_events.c, res/res_security_log.c, tests/test_cel.c,
tests/test_event.c, main/cel.c, and the CEL backends.
Review: https://reviewboard.asterisk.org/r/2703/
(closes issue ASTERISK-22139)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396887 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit is smaller than the initial review placed on review board. This is because
a change to allow for channel drivers to access parking functionality externally was
committed and invalidated quite a few of the changes initially made.
(closes issue ASTERISK-22039)
reported by Matt Jordan
Review: https://reviewboard.asterisk.org/r/2717
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396103 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does the following:
* It moves the pickup code out of features.c and into pickup.c
* It removes the vast majority of dead code out of features.c. In particular,
this includes the parking code.
(issue ASTERISK-22134)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396060 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does the following:
* It adds support for externally initiated parking requests. In particular,
chan_skinny has a protocol level message that initiates a call park.
This patch now supports that option, as well as the protocol specific
mechanisms in chan_dahdi/sig_analog and chan_mgcp.
* A parking bridge features virtual table has been added that provides
access to the parking functionality that the Bridging API needs. This
includes requests to park an entire 'call' (with little or no additional
information, thank you chan_skinny), perform a blind transfer to a parking
extension, determine if an extension is a parking extension, as well as the
actual "do the parking" request from the Bridging API.
* Refactoring in chan_mgcp, chan_skinny, and chan_dahdi to make use of the new
functions
* The removal of some - but not all - dead parking code from features.c
This also fixed blind transferring a multi-party bridge to a parking lot (which
was implemented, but had at least one code path where using the parking features
kK might not have worked)
Review: https://reviewboard.asterisk.org/r/2710
(closes issue ASTERISK-22134)
Reported by: Matt Jordan
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396028 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch renames the bridging* files to bridge*. This may seem pedantic
and silly, but it fits better in line with current Asterisk naming conventions:
* channel is not "channeling"
* monitor is not "monitoring"
etc.
A bridge is an object. It is a first class citizen in Asterisk. "Bridging" is
the act of using a bridge on a set of channels - and the API that fulfills that
role is more than just the action.
(closes issue ASTERISK-22130)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395378 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Major changes are to pull all packet reading functions into skinny_session
and move timeout handling to scheduling arrangements. Thread cancelling is
now undertaken directly rather than waiting for the read to timeout
(cleanup is popped on thread cancel). Also added some keepalive timings in
debugging messages.
Keepalive timeout has been increased from 1.1 by keepalive to 3 times
keepalive. This seems to align (after keepalives stabilise) with when
devices reset after not receiving keepalives. Probably needs more work,
especially around the first and/or second keepalives that vary
significantly by device and firmware version.
Review: https://reviewboard.asterisk.org/r/2611/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394147 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does the following:
* It merges Jaco Kroon's patch from ASTERISK-20754, which provides channel
information in the RTCP events. Because Stasis provides a cache, Jaco's
patch was modified to pass the channel uniqueid to the RTP layer as
opposed to a pointer to the channel. This has the following benefits:
(1) It keeps the RTP engine 'clean' of references back to channels
(2) It prevents circular dependencies and other potential ref counting issues
* The RTP engine now allows any RTP implementation to raise RTCP messages.
Potentially, other implementations (such as res_rtp_multicast) could also
raise RTCP information. The engine provides structs to represent RTCP headers
and RTCP SR/RR reports.
* Some general refactoring in res_rtp_asterisk was done to try and tame the
RTCP code. It isn't perfect - that's *way* beyond the scope of this work -
but it does feel marginally better.
* A few random bugs were fixed in the RTCP statistics. (Example: performing an
assignment of a = a is probably not correct)
* We now raise RTCP events for each SR/RR sent/received. Previously we wouldn't
raise an event when we sent a RR report.
Note that this work will be of use to others who want to monitor call quality
or build modules that report call quality statistics. Since the events are now
moving across the Stasis message bus, this is far easier to accomplish. It is
also a first step (though by no means the last step) towards getting Olle's
pinefrog work incorporated.
Again: note that the patch by Jaco Kroon was modified slightly for this work;
however, he did all of the hard work in finding the right places to set the
channel in the RTP engine across the channel drivers. Much thanks goes to Jaco
for his hard work here.
Review: https://reviewboard.asterisk.org/r/2603/
(closes issue ASTERISK-20574)
Reported by: Jaco Kroon
patches:
asterisk-rtcp-channel.patch uploaded by jkroon (License 5671)
(closes issue ASTERISK-21471)
Reported by: Matt Jordan
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393740 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is the initial push to update Asterisk's CDR engine for the new
bridging framework. This patch guts the existing CDR engine and builds the new
on top of messages coming across Stasis. As changes in channel state and bridge
state are detected, CDRs are built and dispatched accordingly. This
fundamentally changes CDRs in a few ways.
(1) CDRs are now *very* reflective of the actual state of channels and bridges.
This means CDRs track well with what an actual channel is doing - which
is useful in transfer scenarios (which were previously difficult to pin
down). It does, however, mean that CDRs cannot be 'fooled'. Previous
behavior in Asterisk allowed for CDR applications, channels, and other
properties to be spoofed in parts of the code - this no longer works.
(2) CDRs have defined behavior in multi-party scenarios. This behavior will not
be what everyone wants, but it is a defined behavior and as such, it is
predictable.
(3) The CDR manipulation functions and applications have been overhauled. Major
changes have been made to ResetCDR and ForkCDR in particular. Many of the
options for these two applications no longer made any sense with the new
framework and the (slightly) more immutable nature of CDRs.
There are a plethora of other changes. For a full description of CDR behavior,
see the CDR specification on the Asterisk wiki.
(closes issue ASTERISK-21196)
Review: https://reviewboard.asterisk.org/r/2486/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391947 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch moves a number of AMI events over to the Stasis-Core message bus.
This includes:
* ChanSpyStart/Stop
* MonitorStart/Stop
* MusicOnHoldStart/Stop
* FullyBooted/Reload
* All Voicemail/MWI related events
In addition, it adds some Stasis-Core and AMI support for generic AMI messages,
refactors the message router in AMI to use a single router with topic
forwarding for the topics that AMI cares about, and refactors MWI message
types and topics to be more name compliant.
Review: https://reviewboard.asterisk.org/r/2532
(closes issue ASTERISK-21462)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389733 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Breaks many things until they can be reworked. A partial list:
chan_agent
chan_dahdi, chan_misdn, chan_iax2 native bridging
app_queue
COLP updates
DTMF attended transfers
Protocol attended transfers
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389378 65c4cc65-6c06-0410-ace0-fbb531ad65f3
CallforwardNoAnswer uses a sched to determine when to forward the call.
Defaults to 20secs but configurable in skinny.conf.
Adds dialType to each subchannel structure to be used to differentiate
between normal dials that result in a call being placed (default) and
other uses for the skinny_dialer (such as cfwd digit collection).
Restructured all cfwd handling to use this new arrangement.
(closes issue ASTERISK-21292)
Reported by: wedhorn
Tested by: myself
Patches:
skinny-callfwdnoans03.diff uploaded by wedhorn (license 5019)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389097 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The softbutton endcall should not turn a transfer into a blind transfer but
hangup the exten being called and leave the original call on hold. This does
that.
(closes issue ASTERISK-21321)
Reported by: wedhorn
Tested by: snuffy, myself
Patches:
skinny-xferendcall01.diff uploaded by wedhorn (license 5019)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@383948 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This code caused a compiler warning when --enable-dev-mode was not used.
The warning was that this variable was set but not used. That was indeed
the case as the only place this is used is as an argument to SKINNY_DEBUG
which is compiled out when not in dev mode.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@383838 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Remove MWI's dependency on the event system by moving it to
Stasis-core. This also introduces forwarding topic pools in Stasis-core
which aggregate many dynamically allocated topics into a single primary
topic.
Review: https://reviewboard.asterisk.org/r/2368/
(closes issue ASTERISK-21097)
Patch-by: Kinsey Moore
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@383284 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Basically sets the callerid and callername to the first device talked to for the
purposes of putting the the calls made log on the device. Does not affect the device
displaying who the device is currently talking to.
Also some minor changes to use sub->exten in lieu of l->lastnumberdialed.
(closes issue ASTERISK-21095)
Reported by: wedhorn
Tested by: snuffy, myself
Patches:
skinny-calllogsoutbound03.diff uploaded by wedhorn (license 5019)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382008 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Adds both fixed and variable prinotify messages and clearprinotify messages to skinny.
Also adds cli function for pushing messages to devices. i
Initial code by snuffy, expanded by myself to include fixed messages.
(closes issue ASTERISK-21091)
Reported by: snuffy
Tested by: snuffy, myself
Patches:
skinny-prinotify02.diff uploaded by wedhorn (license 5019)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382007 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Patch adds all the packet and structure stuff to skinny to enable setting
service URLs in skinny, such as corporate directories.
This stuff is only relevant during load/unload as when activated. Also
some minor changes removing duplicated counting of addons and speedials in
handle_skinny_show_devices.
Review: https://reviewboard.asterisk.org/r/2321/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381718 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Auto complete for skinny debug allows multiple options and negation, also add
debug all option. Usage example: 'skinny debug all -packets' (each can be
autocompleted including -packet).
Change show device to use device name. Remove the duplicate ast_strdup's from
place calling device complete return immediately from complete devicename and
complete linename so that multiple options are displayed on the CLI if more
than one option available.
Review: https://reviewboard.asterisk.org/r/2333/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381717 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Don't know why it seemed to work during testing, but it really is needed
for protocol v17 (and probably above).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381470 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Fix chan_skinny so that it respects callerID presentation of inbound calls to
device and a couple of other minor fixes: 145 packet (add OCTAL_FROM amd callerid),
and dont send dialednumber message if protocol >= 17.
(closes issue ASTERISK-21066)
Reported by: snuffy
Tested by: snuffy, myself
Patches:
skinny-respect-clid-restrictions-v2.diff uploaded by snuffy (license 5024)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381465 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Add extra string to transmit_callinfo_var, Only set string2 to tonum for outgoing calls
and changes to send_callinfo and push_callinfo to not set callid name to last number.
(closes issue ASTERISK-21063)
Reported by: wedhorn
Tested by: snuffy, myself
Patches:
skinny-callinfoupdate03.diff uploaded by wedhorn (license 5019)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381195 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Patch ensures that d->activeline and l->activesub are moved over to the
new device and line so that on callend the appropriate subs can be found
to complete hangup before device resets.
(closes issue ASTERISK-16610)
Reported by: wedhorn
Tested by: snuffy, myself
Patches:
skinny-reloadactive01.diff uploaded by wedhorn (license 5019)
........
Merged revisions 380942 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@380943 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Make skinny reset vmexten and immeddial to '\0' on reload to ensure that
it is set to '\0' if the appropriate item is removed/commented in
skinny.conf. Also small fix re immeddial char in skinny.conf and add
immedial setting to skinny show settings.
(closes issue ASTERISK-21037)
Reported by: snuffy
Tested by: snuffy, myself
Patches:
immed_dial_fix.diff uploaded by snuffy (license 5024)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@380925 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Add new variable length displayprompt packet (0x0145) to skinny. Uses the new
packet if the device is reporting protocol versions >= 17.
Add the use of octal codes for sending prompts to both the new and old
displayprompt messages (also cleaned up soft_key_template_default to use the
defined octal codes).
Review: https://reviewboard.asterisk.org/r/2294/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@380792 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Add packet 0x014A (variable length call info messages) to skinny for newer
firmware. Plenty of unknown information but includes the equivalent functionality
as the fixed size callinfo packet already included.
Only send this packet if protocol reported is >= 17.
Review: https://reviewboard.asterisk.org/r/2290/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@380755 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Adds a dial softkey when the device is in DAFD. The softkey is greyed (unusable)
until a possible dialplan match is entered. Code includes updating
transmit_selectsoftkeys to allow the use of a button mask. Also add option
to use # or * as a dial now button. Original patch by snuffy cleaned up by myself.
Review: https://reviewboard.asterisk.org/r/2277/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@380057 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Skinny device call logging (ie missed, place and received calls) has issues
because the incorrect sequence of callstates is/can be sent to the device.
This patch removes some extra callstate updates driven by forces external
to skinny and ensures the needed intermediary callstate messages are sent.
(closes issue ASTERISK-20964)
Reported by: wedhorn
Tested by: snuffy, myself
Patches:
ast11-skinny-calllog01.diff uploaded by wedhorn (license 5019)
........
Merged revisions 379677 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@379678 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk maintains an internal cache for devices in the event subsystem. The
device state cache holds the state of each device known to Asterisk, such that
consumers of device state information can query for the last known state for
a particular device, even if it is not part of an active call. The concept of
a device in Asterisk can include entities that do not have a physical
representation. One way that this occurred was when anonymous calls are allowed
in Asterisk. A device was automatically created and stored in the cache for
each anonymous call that occurred; this was possible in the SIP and IAX2
channel drivers and through channel drivers that utilized the
res_jabber/res_xmpp resource modules (Gtalk, Jingle, and Motif). These devices
are never removed from the system, allowing anonymous calls to potentially
exhaust a system's resources.
This patch changes the event cache subsystem and device state management to
no longer cache devices that are not associated with a physical entity.
(issue ASTERISK-20175)
Reported by: Russell Bryant, Leif Madsen, Joshua Colp
Tested by: kmoore
patches:
event-cachability-3.diff uploaded by jcolp (license 5000)
........
Merged revisions 378303 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 378320 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 378321 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@378322 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Fixup the vmexten so if globally set in general section will be honored by
chan_skinny. Also get rid of the 'global_' part of variable name to match
regexten.
(closes issue ASTERISK-20790)
Reported by: snuffy
Tested by: snuffy, myself
Patches:
skinny-vm.diff uploaded by snuffy (license 5024)
........
Merged revisions 378010 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@378011 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Review the syntax of the 'skinny debug' command to show more than
just 'show' for options to 'skinny debug' command.
(closes issue ASTERISK-20789)
Reported by: snuffy
Tested by: snuffy, myself
Patches:
skinny-debug.diff uploaded by snuffy (license 5024)
........
Merged revisions 377985 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@377986 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Update and extend the configuration_file group and enable linking. Update title that was left behind many years ago.
(issue ASTERISK-20259)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@375006 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Debugging messages and associated controls only compiled in if configured with --enable-dev-mode. Debug messages provide more detail (including thread id) and are grouped so the user/dev can limit the type of messages displayed. Functionally no real change to chan_skinny.
Review: https://reviewboard.asterisk.org/r/2040/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370881 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added test to skinny_register to only allow device to register against
a device that is not already registered.
Addback l->device test for skinny_show_lines. Fixes segfault if a line
is configured but not configured to a device. Reverses part of r368680.
Removed redundant l->device tests in subsubstate and dumpsub. l->device
will always be valid if these routines are called. Reverses 368948 -
discussed with mjordan on irc.
Some indentation cleanup.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369034 65c4cc65-6c06-0410-ace0-fbb531ad65f3
AST-2012-008 (r367844) fixed a denial of service attack exploitable in the
Skinny channel driver that occurred when certain messages are sent after a
previously registered station sends an Off Hook message. Unresolved in that
patch is an issue in the Asterisk 10 releases, wherein, if a Station Key
Pad Button Message is processed after an Off Hook message, the channel driver
will inappropriately dereference a NULL pointer.
This patch fixes those places where the message handling or the channel
callback functions would attempt to dereference the line's pointer to the
device.
(issue ASTERISK-19905)
Reported by: Christoph Hebeisen
Tested by: mjordan, Christoph Hebeisen
Patches:
AST-2012-009-10.diff uploaded by mjordan (license 6283)
........
Merged revisions 368947 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368948 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Original was testing for d->session, setting and testing again (all nested).
Removed duplicate testing and restructured function to test/return and then
the main code.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368681 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Removed d->registered which was mirroring d->session. Changed relevant
references to use d->session instead.
Moved setting and unsetting of l->device from session register to device
configuration. As such, l->device will always be valid unless it is has not
been configured to a device. Revised various test where checking if a device
is registered to use l->device->session.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368680 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Presence support has been added. This is accomplished by
allowing for presence hints in addition to device state
hints. A dialplan function called PRESENCE_STATE has been
added to allow for setting and reading presence. Presence
can be transmitted to Digium phones using custom XML
elements in a PIDF presence document.
Voicemail has new APIs that allow for moving, removing,
forwarding, and playing messages. Messages have had a new
unique message ID added to them so that the APIs will work
reliably. The state of a voicemail mailbox can be obtained
using an API that allows one to get a snapshot of the mailbox.
A voicemail Dialplan App called VoiceMailPlayMsg has been
added to be able to play back a specific message.
Configuration hooks have been added. Configuration hooks
allow for a piece of code to be executed when a specific
configuration file is loaded by a specific module. This is
useful for modules that are dependent on the configuration
of other modules.
chan_sip now has a public method that allows for a custom
SIP INFO request to be sent mid-dialog. Digium phones use
this in order to display progress bars when files are played.
Messaging support has been expanded a bit. The main
visible difference is the addition of an AMI action
MessageSend.
Finally, a ParkingLots manager action has been added in order
to get a list of parking lots.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368435 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a skinny session is unregistered, the corresponding device pointer is set
to NULL in the channel private data. If the client was not in the on-hook state
at the time the connection was closed, the device pointer can later be
dereferened if a message or channel event attempts to use a line's pointer to
said device.
The patches prevent this from occurring by checking the line's pointer in
message handlers and channel callbacks that can fire after an unregistration
attempt.
(closes issue ASTERISK-19905)
Reported by: Christoph Hebeisen
Tested by: mjordan, Damien Wedhorn
Patches:
AST-2012-008-1.8.diff uploaded by mjordan (license 6283)
AST-2012-008-10.diff uploaded by mjordan (licesen 6283)
........
Merged revisions 367844 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@367845 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is the starting point for the Asterisk 11: Who Hung Up work and provides
a framework which will allow channel drivers to report the types of hangup
cause information available in SIP_CAUSE without incurring the overhead of the
MASTER_CHANNEL dialplan function. The initial implementation only includes
cause generation for chan_sip and does not include cause code translation
utilities.
This change deprecates SIP_CAUSE and replaces its method of reporting cause
codes with the new framework. This change also deprecates the 'storesipcause'
option in sip.conf.
Review: https://reviewboard.asterisk.org/r/1822/
(Closes issue SWP-4221)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@366408 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When handling a keypad button message event, the received digit is placed into
a fixed length buffer that acts as a queue. When a new message event is
received, the length of that buffer is not checked before placing the new digit
on the end of the queue. The situation exists where sufficient keypad button
message events would occur that would cause the buffer to be overrun. This
patch explicitly checks that there is sufficient room in the buffer before
appending a new digit.
(closes issue ASTERISK-19592)
Reported by: Russell Bryant
........
Merged revisions 363100 from http://svn.asterisk.org/svn/asterisk/branches/1.6.2
........
Merged revisions 363102 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 363103 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@363105 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Fixes up softkey endcall. Previous code was a copy of onhook, now
allows for endcall softkey to be used while device is still onhook.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353224 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Continue channel opaque-ification by wrapping all of the stringfields.
Eventually, we will restrict what can actually set these variables, but
the purpose for now is to hide the implementation and keep people from
adding code that directly accesses the channel structure. Semantic
changes will follow afterward.
Review: https://reviewboard.asterisk.org/r/1661/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@352348 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There are many benefits to making the ast_channel an opaque handle, from
increasing maintainability to presenting ways to kill masquerades. This patch
kicks things off by taking things a field at a time, renaming the field to
'__do_not_use_${fieldname}' and then writing setters/getters and converting the
existing code to using them. When all fields are done, we can move ast_channel
to a C file from channel.h and lop off the '__do_not_use_'.
This patch sets up main/channel_interal_api.c to be the only file that actually
accesses the ast_channel's fields directly. The intent would be for any API
functions in channel.c to use the accessor functions. No more monkeying around
with channel internals. We should use our own APIs.
The interesting changes in this patch are the addition of
channel_internal_api.c, the moving of the AST_DATA stuff from channel.c to
channel_internal_api.c (note: the AST_DATA stuff will have to be reworked to
use accessor functions when ast_channel is really opaque), and some re-working
of the way channel iterators/callbacks are handled so as to avoid creating fake
ast_channels on the stack to pass in matching data by directly accessing fields
(since "name" is a stringfield and the fake channel doesn't init the
stringfields, you can't use the ast_channel_name_set() function). I went with
ast_channel_name(chan) for a getter, and ast_channel_name_set(chan, name) for a
setter.
The majority of the grunt-work for this change was done by writing a semantic
patch using Coccinelle ( http://coccinelle.lip6.fr/ ).
Review: https://reviewboard.asterisk.org/r/1655/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@350223 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Fix a segfault if an attempt to answer a call is made between when
the inbound call gives up (and the channel is removed) and when the
device is notified and removes the call from the device.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@347490 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If a simple switch was started on a device and then a specific call
made (such as redial or speed dial), on timeout of the simple switch
the call would be attempted again. This patch only allows the simple
switch to make a call if the substate is still in the collecting
digits mode.
Also added small debug message to dialAndAactivate sub.
Tested by snuff and myself.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@340973 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added some data to skinny packet structures to make compatible
with v17. Added protocolversion to device, set on registration
based on the version provided by device.
v17 includes some increased ip space for ip6. This patch increases
ip space in the packets but still only uses ip4. Some packet
structures duplicated (ip4 and ip6 types). ip4 type used unless
version is greater or equal to 17.
Tested by snuff and myself on 7961 with recent 8.5 firmware. Also
tested compatible with old 7960 and older 30VIPs.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@340071 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Increase SKINNY_MAX_PACKET to 2000 bytes to handle some messages
in v17 that are greater than the old 1000 bytes. Also add some
useful logging regarding packet and session handling.
A device (with protocol v17) was sending a packet with length
greater than 1000 which resulted in the TCP session being
destroyed and registration being retryed.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@340070 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
........
r340031 | wedhorn | 2011-10-10 09:18:27 +1100 (Mon, 10 Oct 2011) | 8 lines
Return -1 to skinny_session if register rejected.
If device registration is rejected, return -1 so that the session is
destroyed immediately. Previously, a segfault would occur on a
graceful shutdown if a register is rejected and the skinny_session
has not yet timed out.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@340032 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
........
r339992 | wedhorn | 2011-10-10 08:09:12 +1100 (Mon, 10 Oct 2011) | 9 lines
Remove log message on traverse session list.
On destroying a session, a list of sessions is traversed to find the
matching session. For each session not matching, skinny erroneously
logged that the session was not matched. While technically correct
the message was misleading, and tended to indicate errors that
were not there.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@339993 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There was an issue that the cap and confcap pointers for each line and device
were being memcpy'd so they all pointed to the same ast_format_cap. On
destroying, a segfault occured on the second call to the same struct.
skinny reload now works again as well.
Tested by snuff and myself.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@339680 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r335078 | mjordan | 2011-09-09 11:27:01 -0500 (Fri, 09 Sep 2011) | 29 lines
Merged revisions 335064 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r335064 | mjordan | 2011-09-09 11:09:09 -0500 (Fri, 09 Sep 2011) | 23 lines
Updated SIP 484 handling; added Incomplete control frame
When a SIP phone uses the dial application and receives a 484 Address
Incomplete response, if overlapped dialing is enabled for SIP, then
the 484 Address Incomplete is forwarded back to the SIP phone and the
HANGUPCAUSE channel variable is set to 28. Previously, the Incomplete
application dialplan logic was automatically triggered; now, explicit
dialplan usage of the application is required.
Additionally, this patch adds a new AST_CONTOL_FRAME type called
AST_CONTROL_INCOMPLETE. If a channel driver receives this control frame,
it is an indication that the dialplan expects more digits back from the
device. If the device supports overlap dialing it should attempt to
notify the device that the dialplan is waiting for more digits; otherwise,
it can handle the frame in a manner appropriate to the channel driver.
(closes issue ASTERISK-17288)
Reported by: Mikael Carlsson
Tested by: Matthew Jordan
Review: https://reviewboard.asterisk.org/r/1416/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@335079 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Autoanswer added to skinny based on incoming chan var SKINNY_AUTOANSWER.
Initial value must be the time to autoanswer in ms, then optionally :BEEP
to play a tone when answered and :MUTE to mute the mic when answering.
eg 3000:MUTE:BEEP will ring for 3 secs, then answer, mute the mic, and
play a beep. just 3000 would answer afer 3 secs of ringing with no
beep and full two way audio.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@322544 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The do_monitor seemed to be there for task scheduling and network monitoring. However, the network monitoring has a dedicated thread so the ast_io_wait was basically just a usleep as it didn't actually seem to be monitoring anything.
Review: https://reviewboard.asterisk.org/r/1256/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@322381 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Probably haven't been working for a couple of years. May still need
some more love, but they are now working, both as a hint device and
monitoring a hint. Changes centre around the long ago change
to remove the requirement for a device name in a skinny line, and
changes to the transmit_* functions.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@319316 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When called, activatesub first cleans up the active sub and then
handles the sub passed. dialandactivatesub first sets sub->exten
and then calls activatesub. Revise handle_offhook to utilise the
callid sent to chan_skinny. Some other minor fixes especially around
d->hookstate (which still needs some more work).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@319024 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There were some issues where if a simple switch was cancelled and a
new switch started before the first had timed out where the d->exten
would be used for both subchannels. This was bad leading to possible
invalid extensions if some digits had been entered in the abandoned
simple switch and the second one was completed before the first timed
out, or the second would be cancelled because d->exten would be set to
nothing on the time out of the first.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@318833 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Consolidate the functions and add some debugging info. Allows to be
able to set a substate without explicitly knowing what the state is.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@318635 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Add the setsubstate_onhook to complete the initial substate handling
procedures. Added dumpsub(sub, forcehangup) which is the common way of
calling setsubstate_onhook. Dumpsub attempts to activate another sub
after setting the current one onhook.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@318600 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Mark Michelson
Joshua Colp
David M. Lee
Kinsey Moore
Matthew Jordan
Jason Parker
Damien Wedhorn
Richard Mudgett
Russell Bryant
Andrew Latham
Sean Bright
Terry Wilson
Walter Doekes
Tilghman Lesher
Leif Madsen