3715 Commits (c49b07aa636b0eca9d806e64f47b9a310bf5e3fc)

Author	SHA1	Message	Date
Vasil Kolev	89cc86fc38	chan_sip: bigger buffers for headers, better failure mode ... Currently chan_sip can give weird messages if the contacts don't fit in the From: or To: headers. This fix changes the from,to and invite variables to use ast_str, allocates and deallocates them and resizes them if needed. ASTERISK-26069 #close Change-Id: I1b68fcbddca6f6cc7d7a92fe1cb0d5430282b2b3	9 years ago
George Joseph	a99ddc6a0d	build: Fix ast_sockaddr initialization to be more portable ... A change to glibc 2.22 changed the order of the sockadddr_storage members which caused the places where we do an initialization of ast_sockaddr with '{ { 0, 0, } }' to fail compilation. Those initializers (which we shouldn't have been using anyway) have been replaced with memsets. Change-Id: Idd1b3b320903d8771bfe221f0b015685de628fa4	9 years ago
George Joseph	77e8ec162b	chan_sip: Prevent extra Session-Expires headers from being added ... When chan_sip does a re-INVITE to refresh a session and authentication is required, the INVITE with the Authorization header containes a second Session-Expires header without the ";refersher=" parameter. This is causing some proxies to return a 400. Also, when Asterisk is the uas and the refresher, it is including the Session-Expires and Min-SE headers in OPTIONS messages which is not allowed per RFC4028. This patch (based on the reporter's) Checks to see if a Session-Expires header is already in the message before adding another one. It also checks that the method is INVITE or UPDATE. ASTERISK-26030 #close Change-Id: I58a7b07bab5a3177748d8a7034fb8ad8e11ce1d9	9 years ago
zuul	72ee8c1bf9	Merge "chan_sip: Make autocreated peers send PeerStatus events" into 13	9 years ago
Joshua Colp	949bf6b282	chan_sip: Give more time for TCP/TLS threads to stop. ... The unload process currently tells each TCP/TLS to terminate but does not wait for them to do so. This introduces a race condition where the container holding the threads may be destroyed before the threads are able to remove themselves from it. When they finally do the container is invalid and can't be used causing a crash. A previous change existed which waited a bit to wait for any stranglers to finish. This change extends this and waits longer. ASTERISK-25961 #close Change-Id: Idc6262b670ca49ede32061159e323b7b63c6f3c6	9 years ago
kkm	29bab0d1a4	chan_sip: Make autocreated peers send PeerStatus events ... Since Stasis has been introduced, an attempt to send AMI messages by an autocreated peer caused a crash, and all events from autocreated peers were semi-inadvertently disabled altogether in 0b83761. This change restores the disabled functionality. ASTERISK-25950 Change-Id: Iecc350f23db603fadb2f302064643ebe9664e974	9 years ago
Jaco Kroon	22335fe18a	chan_sip: Don't verify table if rtupdate=no ... If rtupdate=no do not verify sipregs/peers table has updatable fields. ASTERISK-25934 #close Change-Id: Iaa2c53037b93daccc7e7333c40d61861847b856d	9 years ago
Alexander Traud	81ce60f6d4	chan_sip: Do not send all codecs on INVITE. Do not break on Session-Timers. ... Asterisk 13.7.0 included a fix for ASTERISK-24543, not to send all those codecs, which the caller did not request/support. That fix was not complete because on the second Session Timer all codecs were sent again. Some VoIP/SIP clients interpreted that complete codec-list as a change in the SIP session. Because of that, Asterisk did not send the RTP audio via NAT anymore which created a non-audio scenario after the second Session Timer fired. ASTERISK-24543 #close Change-Id: I1881827816ab7fd47eb4287a95961179b34a0b66	9 years ago
Francesco Castellano	c5170677e7	chan_sip.c: Space after port causes unnecessary resolution attempt ... check_via() already skips leading blanks where the sent-by address (with the optional port) should be placed. Since RFC 3261 allows for blanks between the port ant the Via parameters: > https://tools.ietf.org/html/rfc3261#section-20.42 (actually it allows a lot of blanks more ;-)). I just switched from ast_skip_blanks() to ast_strip() on the local copy of the string. ASTERISK-21301 #close Change-Id: Ie5b8fe5a07067b7c0dc9bcdd1707e99b23b02b06	9 years ago
Richard Mudgett	de04308ae4	chan_sip.c: Fix mwi resub deadlock potential. ... This patch is part of a series to resolve deadlocks in chan_sip.c. Stopping a scheduled event can result in a deadlock if the scheduled event is running when you try to stop the event. If you hold a lock needed by the scheduled event while trying to stop the scheduled event then a deadlock can happen. The general strategy for resolving the deadlock potential is to push the actual starting and stopping of the scheduled events off onto the scheduler/do_monitor() thread by scheduling an immediate one shot scheduled event. Some restructuring may be needed because the code may assume that the start/stop of the scheduled events is immediate. ASTERISK-25023 #close Change-Id: I96d429c57a48861fd8bde63dd93db4e92dc3adb6	9 years ago
Richard Mudgett	5f6627a8a4	chan_sip.c: Fix registration timeout and expire deadlock potential. ... This patch is part of a series to resolve deadlocks in chan_sip.c. Stopping a scheduled event can result in a deadlock if the scheduled event is running when you try to stop the event. If you hold a lock needed by the scheduled event while trying to stop the scheduled event then a deadlock can happen. The general strategy for resolving the deadlock potential is to push the actual starting and stopping of the scheduled events off onto the scheduler/do_monitor() thread by scheduling an immediate one shot scheduled event. Some restructuring may be needed because the code may assume that the start/stop of the scheduled events is immediate. ASTERISK-25023 Change-Id: I2e40de89efc8ae6e8850771d089ca44bc604b508	9 years ago
Richard Mudgett	32bd7a64f9	chan_sip.c: Fix t38id deadlock potential. ... This patch is part of a series to resolve deadlocks in chan_sip.c. Stopping a scheduled event can result in a deadlock if the scheduled event is running when you try to stop the event. If you hold a lock needed by the scheduled event while trying to stop the scheduled event then a deadlock can happen. The general strategy for resolving the deadlock potential is to push the actual starting and stopping of the scheduled events off onto the scheduler/do_monitor() thread by scheduling an immediate one shot scheduled event. Some restructuring may be needed because the code may assume that the start/stop of the scheduled events is immediate. ASTERISK-25023 Change-Id: If595e4456cd059d7171880c7f354e844c21b5f5f	9 years ago
Richard Mudgett	43556b800b	chan_sip.c: Fix reinviteid deadlock potential. ... This patch is part of a series to resolve deadlocks in chan_sip.c. Stopping a scheduled event can result in a deadlock if the scheduled event is running when you try to stop the event. If you hold a lock needed by the scheduled event while trying to stop the scheduled event then a deadlock can happen. The general strategy for resolving the deadlock potential is to push the actual starting and stopping of the scheduled events off onto the scheduler/do_monitor() thread by scheduling an immediate one shot scheduled event. Some restructuring may be needed because the code may assume that the start/stop of the scheduled events is immediate. ASTERISK-25023 Change-Id: I9c11b9d597468f63916c99e1dabff9f4a46f84c1	9 years ago
Richard Mudgett	38c1cdab2c	chan_sip.c: Fix packet retransid deadlock potential. ... This patch is part of a series to resolve deadlocks in chan_sip.c. Stopping a scheduled event can result in a deadlock if the scheduled event is running when you try to stop the event. If you hold a lock needed by the scheduled event while trying to stop the scheduled event then a deadlock can happen. The general strategy for resolving the deadlock potential is to push the actual starting and stopping of the scheduled events off onto the scheduler/do_monitor() thread by scheduling an immediate one shot scheduled event. Some restructuring may be needed because the code may assume that the start/stop of the scheduled events is immediate. * Fix retrans_pkt() to call check_pendings() with both the owner channel and the private objects locked as required. * Refactor dialog retransmission packet list to safely remove packet nodes. The list nodes are now ao2 objects. The list has a ref and the scheduled entry has a ref. ASTERISK-25023 Change-Id: I50926d81be53f4cd3d572a3292cd25f563f59641	9 years ago
Richard Mudgett	e4ad55c888	chan_sip.c: Fix waitid deadlock potential. ... This patch is part of a series to resolve deadlocks in chan_sip.c. Stopping a scheduled event can result in a deadlock if the scheduled event is running when you try to stop the event. If you hold a lock needed by the scheduled event while trying to stop the scheduled event then a deadlock can happen. The general strategy for resolving the deadlock potential is to push the actual starting and stopping of the scheduled events off onto the scheduler/do_monitor() thread by scheduling an immediate one shot scheduled event. Some restructuring may be needed because the code may assume that the start/stop of the scheduled events is immediate. * Made always run check_pendings() under the scheduler thread so scheduler ids can be checked safely. ASTERISK-25023 Change-Id: Ia834d6edd5bdb47c163e4ecf884428a4a8b17d52	9 years ago
Richard Mudgett	98d5669c28	chan_sip.c: Fix session timers deadlock potential. ... This patch is part of a series to resolve deadlocks in chan_sip.c. Stopping a scheduled event can result in a deadlock if the scheduled event is running when you try to stop the event. If you hold a lock needed by the scheduled event while trying to stop the scheduled event then a deadlock can happen. The general strategy for resolving the deadlock potential is to push the actual starting and stopping of the scheduled events off onto the scheduler/do_monitor() thread by scheduling an immediate one shot scheduled event. Some restructuring may be needed because the code may assume that the start/stop of the scheduled events is immediate. ASTERISK-25023 Change-Id: I6d65269151ba95e0d8fe4e9e611881cde2ab4900	9 years ago
Richard Mudgett	9cb8f73226	chan_sip.c: Fix autokillid deadlock potential. ... This patch is part of a series to resolve deadlocks in chan_sip.c. Stopping a scheduled event can result in a deadlock if the scheduled event is running when you try to stop the event. If you hold a lock needed by the scheduled event while trying to stop the scheduled event then a deadlock can happen. The general strategy for resolving the deadlock potential is to push the actual starting and stopping of the scheduled events off onto the scheduler/do_monitor() thread by scheduling an immediate one shot scheduled event. Some restructuring may be needed because the code may assume that the start/stop of the scheduled events is immediate. * Fix clearing autokillid in __sip_autodestruct() even though we could reschedule. ASTERISK-25023 Change-Id: I450580dbf26e2e3952ee6628c735b001565c368f	9 years ago
Richard Mudgett	c5c7f48a15	chan_sip.c: Fix provisional_keepalive_sched_id deadlock. ... This patch is part of a series to resolve deadlocks in chan_sip.c. Stopping a scheduled event can result in a deadlock if the scheduled event is running when you try to stop the event. If you hold a lock needed by the scheduled event while trying to stop the scheduled event then a deadlock can happen. The general strategy for resolving the deadlock potential is to push the actual starting and stopping of the scheduled events off onto the scheduler/do_monitor() thread by scheduling an immediate one shot scheduled event. Some restructuring may be needed because the code may assume that the start/stop of the scheduled events is immediate. ASTERISK-25023 Change-Id: I98a694fd42bc81436c83aa92de03226e6e4e3f48	9 years ago
Richard Mudgett	f959d84dfd	chan_sip.c: Adjust how dialog_unlink_all() stops scheduled events. ... This patch is part of a series to resolve deadlocks in chan_sip.c. * Make dialog_unlink_all() unschedule all items at once in the sched thread. ASTERISK-25023 Change-Id: I7743072fb228836e8228b72f6dc46c8cc50b3fb4	9 years ago
Richard Mudgett	5f3225ddcc	chan_sip.c: Clear scheduled immediate events on unload. ... This patch is part of a series to resolve deadlocks in chan_sip.c. The reordering of chan_sip's shutdown is to handle any immediate events that get put onto the scheduler so resources aren't leaked. The typical immediate events at this time are going to be concerned with stopping other scheduled events. ASTERISK-25023 Change-Id: I3f6540717634f6f2e84d8531a054976f2bbb9d20	9 years ago
zuul	739c28357e	Merge "chan_sip.c: Simplify sip_pvt destructor call levels." into 13	9 years ago
Richard Mudgett	9ae21b510f	chan_sip.c: Made sip_reinvite_retry() call sip_pvt_lock_full(). ... Change-Id: I90f04208a089f95488a2460185a8dbc3f6acca12	9 years ago
Richard Mudgett	56bcb97a3c	chan_sip.c: Simplify sip_pvt destructor call levels. ... Remove destructor calling destroy_it calling really_destroy_it for no benefit. Just make the destructor the really_destroy_it function. Change-Id: Idea0d47b27dd74f2488db75bcc7f353d8fdc614a	9 years ago
Richard Mudgett	4165ea7778	SIP diversion: Fix REDIRECTING(reason) value inconsistencies. ... Previous chan_sip behavior: Before this patch chan_sip would always strip any quotes from an incoming reason and pass that value up as the REDIRECTING(reason). For an outgoing reason value, chan_sip would check the value against known values and quote any it didn't recognize. Incoming 480 response message reason text was just assigned to the REDIRECTING(reason). Previous chan_pjsip behavior: Before this patch chan_pjsip would always pass the incoming reason value up as the REDIRECTING(reason). For an outgoing reason value, chan_pjsip would send the reason value as passed down. With this patch: Both channel drivers match incoming reason values with values documented by REDIRECTING(reason) and values documented by RFC5806 regardless of whether they are quoted or not. RFC5806 values are mapped to the equivalent REDIRECTING(reason) documented value and is set in REDIRECTING(reason). e.g., an incoming RFC5806 'unconditional' value or a quoted string version ('"unconditional"') is converted to REDIRECTING(reason)'s 'cfu' value. The user's dialplan only needs to deal with 'cfu' instead of any of the aliases. The incoming 480 response reason text supported by chan_sip checks for known reason values and if not matched then puts quotes around the reason string and assigns that to REDIRECTING(reason). Both channel drivers send outgoing known REDIRECTING(reason) values as the unquoted RFC5806 equivalent. User custom values are either sent as is or with added quotes if SIP doesn't allow a character within the value as part of a RFC3261 Section 25.1 token. Note that there are still limitations on what characters can be put in a custom user value. e.g., embedding quotes in the middle of the reason string is silly and just going to cause you grief. * Setting a REDIRECTING(reason) value now recognizes RFC5806 aliases. e.g., Setting REDIRECTING(reason) to 'unconditional' is converted to the 'cfu' value. * Added missing malloc() NULL return check in res_pjsip_diversion.c set_redirecting_reason(). * Fixed potential read from a stale pointer in res_pjsip_diversion.c add_diversion_header(). The reason string needed to be copied into the tdata memory pool to ensure that the string would always be available. Otherwise, if the reason string returned by reason_code_to_str() was a user's reason string then the string could be freed later by another thread. Change-Id: Ifba83d23a195a9f64d55b9c681d2e62476b68a87	9 years ago
Richard Mudgett	18a323e542	chan_sip.c: Fix T.38 issues caused by leaving a bridge. ... chan_sip could not handle AST_T38_TERMINATED frames being sent to it when the channel left the bridge. The action resulted in overlapping outgoing reINVITEs. The testsuite tests/fax/sip/directmedia_reinvite_t38 was not happy. * Force T.38 to be remembered as locally bridged. Now when the channel leaves the native RTP bridge after T.38, the channel remembers that it has already reINVITEed the media back to Asterisk. It just needs to terminate T.38 when the AST_T38_TERMINATED arrives. * Prevent redundant AST_T38_TERMINATED from causing problems. Redundant AST_T38_TERMINATED frames could cause overlapping outgoing reINVITEs if they happen before the T.38 state changes to disabled. Now the T.38 state is set to disabled before the reINVITE is sent. ASTERISK-25582 #close Change-Id: I53f5c6ce7d90b3f322a942af1a9bcab6d967b7ce	9 years ago
Richard Mudgett	6656afffa0	chan_sip.c: Suppress T.38 SDP c= line if addr is the same. ... Use the correct comparison function since we only care if the address without the port is the same. Change-Id: Ibf6c485f843a1be6dee58a47b33d81a7a8cbe3b0	9 years ago
Richard Mudgett	3c81a052c8	AST-2016-002 chan_sip.c: Fix retransmission timeout integer overflow. ... Setting the sip.conf timert1 value to a value higher than 1245 can cause an integer overflow and result in large retransmit timeout times. These large timeout times hold system file descriptors hostage and can cause the system to run out of file descriptors. NOTE: The default sip.conf timert1 value is 500 which does not expose the vulnerability. * The overflow is now detected and the previous timeout time is calculated. ASTERISK-25397 #close Reported by: Alexander Traud Change-Id: Ia7231f2f415af1cbf90b923e001b9219cff46290	9 years ago
StefanEng86	aa9348ab9a	chan_sip.c: AMI & CLI notify methods get different values of asterisk's own ip. ... When I ask asterisk to send a SIP NOTIFY message to a sip peer using either a) AMI action: SIPnotify or b) cli command: sip notify <cmd> <peer>, I expect asterisk to include the same value for its own ip in both cases a) and b), but it seems a) produces a contact header like Contact: <sip:asterisk@192.168.1.227:8060> whereas b) produces a contact header like <sip:asterisk@127.0.0.1:8060>. 0.0.0.0:8060 is my udpbindaddr in sip.conf My guess is that manager_sipnotify should call ast_sip_ouraddrfor(&p->sa, &p->ourip, p) the same way sip_cli_notify does, because after applying this patch, both cases a) and b) produce the contact header that I expect: <sip:asterisk@192.168.1.227:8060> Reported by: Stefan Engström Tested by: Stefan Engström Change-Id: I86af5e209db64aab82c25417de6c768fb645f476	9 years ago
Corey Farrell	a6823bb0c4	chan_sip: Fix buffer overrun in sip_sipredirect. ... sip_sipredirect uses sscanf to copy up to 256 characters to a stacked buffer of 256 characters. This patch reduces the copy to 255 characters to leave room for the string null terminator. ASTERISK-25722 #close Change-Id: Id6c3a629a609e94153287512c59aa1923e8a03ab	9 years ago
Dade Brandon	be050f2638	chan_sip.c: fix websocket_write_timeout default value ... websocket_write_timeout was not being set to its default value during sip config reload, which meant that prior to this commit, 1) the default value of 100 was not used, unless an invalid value (or 1) was specified in sip.conf for websocket_write_timeout, and 2) if the websocket_write_timeout directive was removed from sip.conf without a full restart of asterisk, then the previous value would continue to be used indefinitely. This essentially lead to a 0ms write timeout (the first write attempt in ast_careful_fwrite must have succeeded) in websocket write requests from chan_sip, unless websocket_write_timeout was explicitely set in sip.conf. Changes to websocket_write_timeout still only apply to new websocket sessions, after the sip reload -- timeouts on existing sessions are not adjusted during sip reload. Change-Id: Ibed3816ed29cc354af6564c5ab3e75eab72cb953	10 years ago
Joshua Colp	158a0a5422	chan_sip: Enable WebSocket support by default. ... Per the documentation the WebSocket support in chan_sip is supposed to be enabled by default but is not. This change corrects that. Change-Id: Icb02bbcad47b11a795c14ce20a9bf29649a54423	10 years ago
Jonathan Rose	14b41115e3	chan_sip: Add TCP/TLS keepalive to TCP/TLS server ... Adds the TCP Keep Alive option to TCP and TLS server sockets. Previously this option was only being set on session sockets. http://www.tldp.org/HOWTO/html_single/TCP-Keepalive-HOWTO/ According to the link above, the SO_KEEPALIVE option is useful for knowing when a TCP connected endpoint has severed communication without indicating it or has become unreachable for some reason. Without this patch, keep alive is not set on the socket listening for incoming TCP sessions and in Komatsu's report this resulted in the thread listening for TCP becoming stuck in a waiting state. ASTERISK-25364 #close Reported by: Hiroaki Komatsu Change-Id: I7ed7bcfa982b367dc64b4b73fbd962da49b9af36	10 years ago
Filip Jenicek	142d4fefb8	chan_sip: Check sip_pvt pointer in ast_channel_get_t38_state(c) ... Asterisk may crash when calling ast_channel_get_t38_state(c) on a locked channel which is being hung up. ASTERISK-25609 #close Change-Id: Ifaa707c04b865a290ffab719bd2e5c48ff667c7b	10 years ago
Eugene Voityuk	28d9243079	chan_sip.c: Start ICE negotiation when response is sent or received. ... The current logic for ICE negotiation starts it when receiving an SDP with ICE candidates. This is incorrect as ICE negotiation can only start when each call party have at least one pair of local and remote candidate. Starting ICE negotiation early would result in negotiation failure and ultimately no audio. This change makes it so ICE negotiation is only started when a response with SDP is received or when a response with SDP is sent. ASTERISK-24146 Change-Id: I55a632bde9e9827871b09141d82747e08379a8ca	10 years ago
Richard Mudgett	2b992014dc	chan_sip: Fix crash involving the bogus peer during sip reload. ... A crash happens sometimes when performing a CLI "sip reload". The bogus peer gets refreshed while it is in use by a new call which can cause the crash. * Protected the global bogus peer object with an ao2 global object container. ASTERISK-25610 #close Change-Id: I5b528c742195681abcf713c6e1011ea65354eeed	10 years ago
Richard Mudgett	4aed349a7b	Audit improper usage of scheduler exposed by 5c713fdf18. (v13 additions) ... chan_sip.c: * Initialize mwi subscription scheduler ids earlier because of ASTOBJ to ao2 conversion. * Initialize register scheduler ids earlier because of ASTOBJ to ao2 conversion. chan_skinny.c: * Fix more scheduler usage for the valid 0 id value. ASTERISK-25476 Change-Id: If9f0e5d99638b2f9d102d1ebc9c5a14b2d706e95	10 years ago
Richard Mudgett	6d9156d10f	Audit improper usage of scheduler exposed by 5c713fdf18. ... channels/chan_iax2.c: * Initialize struct chan_iax2_pvt scheduler ids earlier because of iax2_destroy_helper(). channels/chan_sip.c: channels/sip/config_parser.c: * Fix initialization of scheduler id struct members. Some off nominal paths had 0 as a scheduler id to be destroyed when it was never started. chan_skinny.c: * Fix some scheduler id comparisons that excluded the valid 0 id. channel.c: * Fix channel initialization of the video stream scheduler id. pbx_dundi.c: * Fix channel initialization of the packet retransmission scheduler id. ASTERISK-25476 Change-Id: I07a3449f728f671d326a22fcbd071f150ba2e8c8	10 years ago
Steve Davies	07583c2888	Further fixes to improper usage of scheduler ... When ASTERISK-25449 was closed, a number of scheduler issues mentioned in the comments were missed. These have since beed raised in ASTERISK-25476 and elsewhere. This patch attempts to collect all of the scheduler issues discovered so far and address them sensibly. ASTERISK-25476 #close Change-Id: I87a77d581e2e0d91d33b4b2fbff80f64a566d05b	10 years ago
Alexander Traud	1bff400df7	ast_format_cap_get_names: To display all formats, the buffer was increased. ... ASTERISK-25533 #close Change-Id: Ie1a9d1a6511b3f1a56b93d04475fbf8a4e40010a	10 years ago
Corey Farrell	0393bd6bed	chan_sip: Allow websockets to be disabled. ... This patch adds a new setting "websockets_enabled" to sip.conf. Setting this to false allows chan_sip to be used without causing conflicts with res_pjsip_transport_websocket. ASTERISK-24106 #close Reported by: Andrew Nagy Change-Id: I04fe8c4f2d57b2d7375e0e25826c91a72e93bea7	10 years ago
Alexander Traud	1256aedf66	chan_sip: Do not send all codecs on INVITE. ... Since version 13, Asterisk sent all allowed codecs as callee, even when the caller did not request/support them. In case of dynamic RTP payloads, this led to the same ID for different codecs, which is not allowed by SIP/SDP. Now, the intersection between the requested and the supported codecs is send again. ASTERISK-24543 #close Change-Id: Ie90cb8bf893b0895f8d505e77343de3ba152a287	10 years ago
Alexander Traud	869ef2a8ee	chan_sip: Fix autoframing=yes. ... With Asterisk 13, the structures ast_format and ast_codec changed. Because of that, the paketization timing (framing) of the RTP channel moved away from the formats/codecs. In the course of that change, the ptime of the callee was not honored anymore, when the optional autoframing was enabled. ASTERISK-25484 #close Change-Id: Ic600ccaa125e705922f89c72212c698215d239b4	10 years ago
Matt Jordan	f8707ae9a5	channels/chan_sip: Set cause code to 44 on RTP timeout ... To quote Olle: "When issuing a hangup due to RTP timeouts the cause code is not set. I have selected 44 based on Cisco's implementation..." ASTERISK-25135 #close Reported by: Olle Johansson patches: rtp-timeout-cause-1.8.diff uploaded by Olle Johansson (License 5267) Change-Id: Ia62100c55077d77901caee0bcae299f8dc7375fc	10 years ago
Matt Jordan	50fa9ff997	Fix improper usage of scheduler exposed by 5c713fdf18 ... When 5c713fdf18 was merged, it allowed for scheduled items to have an ID of '0' returned. While this was valid per the documentation for the API, it was apparently never returned previously. As a result, several users of the scheduler API viewed the result as being invalid, causing them to reschedule already scheduled items or otherwise fail in interesting ways. This patch corrects the users such that they view '0' as valid, and a returned ID of -1 as being invalid. Note that the failing HEP RTCP tests now pass with this patch. These tests failed due to a duplicate scheduling of the RTCP transmissions. ASTERISK-25449 #close Change-Id: I019a9aa8b6997584f66876331675981ac9e07e39	10 years ago
Walter Doekes	b59c4d82b5	chan_sip: Fix From header truncation for extremely long CALLERID(name). ... The CALLERID(num) and CALLERID(name) and other info are placed into the `char from[256]` in initreqprep. If the name was too long, the addr-spec and params wouldn't fit. Code is moved around so the addr-spec with params is placed there first, and then fitting in as much of the display-name as possible. ASTERISK-25396 #close Change-Id: I33632baf024f01b6a00f8c7f35c91e5f68c40260	10 years ago
Rodrigo Ramírez Norambuena	865377fc38	chan_sip.c: Validation on module reload ... Change validation on reload module because now used the cli function for reload. The sip_reload() function never fail and ever return NULL for this reason on reload() now use the call the sip_reload() and return AST_MODULE_LOAD_SUCCESS. This problem is dectected on reload by PUT method on ARI, getting always 404 http code when the module is reloaded. ASTERISK-25325 #close Reporte by: Rodrigo Ramírez Norambuena Change-Id: I41215877fb2cfc589e0d4d464000cf6825f4d7fb	10 years ago
Joshua Colp	c01111223f	chan_sip: Allow call pickup to set the hangup cause. ... The call pickup implementation in chan_sip currently sets the channel hangup cause to "normal clearing" if call pickup is successfully performed. This action overwrites the "answered elsewhere" hangup cause set by the call pickup code and can result in the SIP device in question showing a missed call when it should not. This change sets the hangup cause to "normal clearing" as a default initially but allows the call pickup to change it as needed. ASTERISK-25346 #close Change-Id: I00ac2c269cee9e29586ee2c65e83c70e52a02cff	10 years ago
Kevin Harwell	25af2d71c8	chan_sip.c: wrong peer searched in sip_report_security_event ... In chan_sip, after handling an incoming invite a security event is raised describing authorization (success, failure, etc...). However, it was doing a lookup of the peer by extension. This is fine for register messages, but in the case of an invite it may search and find the wrong peer, or a non existent one (for instance, in the case of call pickup). Also, if the peers are configured through realtime this may cause an unnecessary database lookup when caching is enabled. This patch makes it so that sip_report_security_event searches by IP address when looking for a peer instead of by extension after an invite is processed. ASTERISK-25320 #close Change-Id: I9b3f11549efb475b6561c64f0e6da1a481d98bc4	10 years ago
Alexander Traud	f68c995bc9	chan_sip: Fix negotiation of iLBC 30. ... iLBC 20 was advertised in a SIP/SDP negotiation. However, only iLBC 30 is supported. Removes "a=fmtp:x mode=y" from SDP. Because of RFC 3952 section 5, only iLBC 30 is negotiated now. ASTERISK-25309 #close Change-Id: I92d724600a183eec3114da0ac607b994b1a793da	10 years ago
Mark Michelson	39cc28f6ea	res_http_websocket: Avoid passing strlen() to ast_websocket_write(). ... We have seen a rash of test failures on a 32-bit build agent. Commit 48698a5e21 solved an obvious problem where we were not encoding a 64-bit value correctly over the wire. This commit, however, did not solve the test failures. In the failing tests, ARI is attempting to send a 537 byte text frame over a websocket. When sending a frame this small, 16 bits are all that is required in order to encode the payload length on the websocket frame. However, ast_websocket_write() thinks that the payload length is greater than 65535 and therefore writes out a 64 bit payload length. Inspecting this payload length, the lower 32 bits are exactly what we would expect it to be, 537 in hex. The upper 32 bits, are junk values that are not expected to be there. In the failure, we are passing the result of strlen() to a function that expects a uint64_t parameter to be passed in. strlen() returns a size_t, which on this 32-bit machine is 32 bits wide. Normally, passing a 32-bit unsigned value to somewhere where a 64-bit unsigned value is expected would cause no problems. In fact, in manual runs of failing tests, this works just fine. However, ast_websocket_write() uses the Asterisk optional API, which means that rather than a simple function call, there are a series of macros that are used for its declaration and implementation. These macros may be causing some sort of error to occur when converting from a 32 bit quantity to a 64 bit quantity. This commit changes the logic by making existing ast_websocket_write() calls use ast_websocket_write_string() instead. Within ast_websocket_write_string(), the 64-bit converted strlen is saved in a local variable, and that variable is passed to ast_websocket_write() instead. Note that this commit message is full of speculation rather than certainty. This is because the observed test failures, while always present in automated test runs, never occur when tests are manually attempted on the same test agent. The idea behind this commit is to fix a theoretical issue by performing changes that should, at the least, cause no harm. If it turns out that this change does not fix the failing tests, then this commit should be reverted. Change-Id: I4458dd87d785ca322b89c152b223a540a3d23e67	10 years ago