include/asterisk/autoconfig.h. Also, move the conditional include of sys/poll.h
or asterisk/poll-compat.h into asterisk/config.h instead of the two headers it
existed in before.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89361 65c4cc65-6c06-0410-ace0-fbb531ad65f3
and the like (this could be used for gtk and gtk2 as well)
Other files: add tests for sdl, sdl_image and avcodec and regenerate
configure and autoconfig.h.in
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89351 65c4cc65-6c06-0410-ace0-fbb531ad65f3
comments on the content of these two files.
utils.h (which is included in over 150 files) contains a lot of
unrelated functions which require the inclusion of a large number
of other headers. At some point we should partition its content
in a better way.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89341 65c4cc65-6c06-0410-ace0-fbb531ad65f3
build times - tested, there is no measureable difference before and
after this commit.
In this change:
use asterisk/compat.h to include a small set of system headers:
inttypes.h, unistd.h, stddef.h, stddint.h, sys/types.h, stdarg.h,
stdlib.h, alloca.h, stdio.h
Where available, the inclusion is conditional on HAVE_FOO_H as determined
by autoconf.
Normally, source files should not include any of the above system headers,
and instead use either "asterisk.h" or "asterisk/compat.h" which does it
better.
For the time being I have left alone second-level directories
(main/db1-ast, etc.).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89333 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89325 | kpfleming | 2007-11-16 10:47:46 -0600 (Fri, 16 Nov 2007) | 4 lines
To help combat problems where people build external modules (asterisk-addons or others) and then change the build options of the Asterisk build in a way that makes the incompatible without warning, this commit introduces an MD5 signature of the important build-time options and includes that signature into modules when they are built. When the loader loads one of these modules and notices the problem, it will emit a warning to console and refuse to initialize the module, as doing so could cause the system to be unstable or even crash.
If you upgrade to this version of Asterisk, you must rebuild *all* of your modules that came from other sources before trying to run this version. If you are using Digium's G.729 binary codec module, you will need v33 or newer.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89326 65c4cc65-6c06-0410-ace0-fbb531ad65f3
through ast_mutex primitives.
To detect all occurrences, I have renamed the lock field in struct ast_channel
so it is clear that it shouldn't be used directly.
There are some uses in res/res_features.c (see details of the diff)
that are error prone as they try and lock two channels without
caring about the order (or without explaining why it is safe).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89293 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This prevents modifying the strings in the stored variables,
and catched a few instances where this was actually done.
Given the differences between trunk and 1.4 (and the fact that this
is effectively an API change) it is better to fix 1.4 independently.
These are
chan_sip.c::sip_register()
chan_skinny.c:: near line 2847
config.c:: near line 1774
logger.c::make_components()
res_adsi.c:: near line 1049
I may have missed some instances for modules that do not build here.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89268 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- handle memory allocation failures
- add an ast_ prefix to a publicly exported function
- put curly braces in the right places
- add a bunch of spaces where they should be be used
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89266 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Also fix a common typo I kept seeing (arguement) in various files.
Closes issue #11222, patch by snuffy (with arguement > argument by me).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89202 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- the *_CURRENT macros no longer need the list head pointer argument
- add AST_LIST_MOVE_CURRENT to encapsulate the remove/add operation when moving entries between lists
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89106 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Remove the AST_FORMAT_MAX_* types, as these are consuming 3 out of our available 32 bits.
- Add a native slin16 type, so that 16kHz codecs can translate without losing resolution.
(This doesn't affect anything immediately, until another codec has wb support.)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89071 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r88805 | russell | 2007-11-05 16:07:54 -0600 (Mon, 05 Nov 2007) | 12 lines
After seeing crashes related to channel variables, I went looking around at the
ways that channel variables are handled. In general, they were not handled in
a thread-safe way. The channel _must_ be locked when reading or writing from/to
the channel variable list.
What I have done to improve this situation is to make pbx_builtin_setvar_helper()
and friends lock the channel when doing their thing. Asterisk API calls almost
all lock the channel for you as necessary, but this family of functions did not.
(closes issue #10923, reported by atis)
(closes issue #11159, reported by 850t)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@88934 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r88931 | russell | 2007-11-06 07:50:15 -0600 (Tue, 06 Nov 2007) | 8 lines
Remove some checks to see if locks are initialized from the non-DEBUG_THREADS
versions of the lock routines. These are incorrect for a number of reasons:
- It breaks the build on mac.
- If there is a problem with locks not getting initialized, then the proper
fix is to find that place and fix the code so that it does get initialized.
- If additional debug code is needed to help find the problem areas, then this
type of things should _only_ be put in the DEBUG_THREADS wrappers.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@88932 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r88719 | russell | 2007-11-05 14:40:01 -0600 (Mon, 05 Nov 2007) | 7 lines
Merge changes from asterisk/team/kpfleming/SRV-priority-handling
Previously, the SRV record support in Asterisk was broken. There was no
guarantee on what record Asterisk would choose to actually use. This set of
changes improves the situation by ensuring that Asterisk will choose the
highest priority record.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@88740 65c4cc65-6c06-0410-ace0-fbb531ad65f3
details and examples are in include/asterisk/stringfields.h.
Not applicable to older branches except for 1.4 which will
receive a fix for the routines that free memory pools.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@88454 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r87168 | murf | 2007-10-26 10:34:02 -0600 (Fri, 26 Oct 2007) | 1 line
closes issue #11086 where a user complains that references to following contexts report a problem; The problem was REALLy that he was referring to empty contexts, which were being ignored. Reporter stated that empty contexts should be OK. I checked it out against extensions.conf, and sure enough, empty contexts ARE ok. So, I removed the restriction from AEL. This, though, highlighted a problem with multiple contexts of the same name. This should be OK, also. So, I added the extend keyword to AEL, and it can preceed the 'context' keyword (mixed with 'abstract', if nec.). This will turn off the warnings in AEL if the same context name is used 2 or more times. Also, I now call ast_context_find_or_create for contexts now, instead of just ast_context_create; I did this because pbx_config does this. The 'extend' keyword thus becomes a statement of intent. AEL can now duplicate the behavior of pbx_config,
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@87187 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r86836 | russell | 2007-10-22 16:36:12 -0500 (Mon, 22 Oct 2007) | 9 lines
If lock tracking is not enabled, then we can not attempt to log any mutex
failures. If so, we could end up in infinite recursion. The only lock that
is affected by this is a mutex in astmm.c used when MALLOC_DEBUG is enabled.
(closes issue #11044)
Reported by: ys
Patches:
lock.h.diff uploaded by ys (license 281)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@86839 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r85532 | russell | 2007-10-13 00:24:33 -0500 (Sat, 13 Oct 2007) | 8 lines
Properly handle the case where read() may return the text for more than one
CLI command at once for a remote console.
(closes issue #10888)
Reported by: jamesgolovich
Patches:
asterisk-climultiple.diff.txt uploaded by jamesgolovich (license 176)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@86585 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r86330 | russell | 2007-10-18 13:03:10 -0500 (Thu, 18 Oct 2007) | 10 lines
The channel needs to stay locked while running timer callbacks, as they access
and modify channel data that may change elsewhere. I went through every timer
callback in the source tree to make sure that none of them did any additional
locking that could introduce deadlocks, and all is well.
(closes issue #10765)
Reported by: Ivan
Patches:
ast_1_4_11_svn_patch_channel_rc.diff uploaded by Ivan (license 229)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@86331 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r85994 | russell | 2007-10-16 17:14:36 -0500 (Tue, 16 Oct 2007) | 16 lines
Some locking errors exposed the fact that the lock debugging code itself was
not thread safe. How ironic! Anyway, these changes ensure that the code that
is accessing the lock debugging data is thread-safe.
Many thanks to Ivan for finding and fixing the core issue here, and also
thanks to those that tested the patch and provided test results.
(closes issue #10571)
(closes issue #10886)
(closes issue #10875)
(might close some others, as well ...)
Patches: (from issue #10571)
ivan_ast_1_4_12_rel_patch_lock.h.diff uploaded by Ivan (license 229)
- a few small changes by me
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@85995 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r85533 | russell | 2007-10-13 01:48:10 -0400 (Sat, 13 Oct 2007) | 12 lines
Fix an issue with console verbosity when running asterisk -rx to execute a command
and retrieve its output. The issue was that there was no way for the main Asterisk
process to know that the remote console was connecting in the -rx mode. The way that
James has fixed this is to have all remote consoles muted by default. Then, regular
remote consoles automatically execute a CLI command to unmute themselves when they
first start up.
(closes issue #10847)
Reported by: atis
Patches:
asterisk-consolemute.diff.txt uploaded by jamesgolovich (license 176)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@85534 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r85316 | russell | 2007-10-10 10:56:23 -0500 (Wed, 10 Oct 2007) | 6 lines
I introduced a new member to the ast_filestream struct in 1.4.12, but put it
in the middle of the struct, instead of at the end. One of the Debian folks,
paravoid, pointed out that this breaks binary compatability with modules
compiled against older headers. So, I'm moving the new member to the end
of the struct to resolve the situation.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@85317 65c4cc65-6c06-0410-ace0-fbb531ad65f3
No real Jingle implementation being available, testing was made using
two Asterisk servers relaying SIP calls over their Jingle channels:
SIP Phone 1 --- [chan_sip]Asterisk 1[chan_jingle] --- [chan_jingle]Asterisk 2[chan_sip] --- SIP Phone 2
Thus, it was possible to test the code in both ways, and make the
Jingle channel comply with the latest specifications. No sound available yet.
Main modifications include :
- modified the 'jingle_candidate' structure and the
'jingle_create_candidates' function according to XEP-0176 ;
- modified the 'jingle_action' function in order to properly terminate
a Jingle session, in conformance with XEP-0166 ;
- modified username format used in STUN requests ;
- actually make the bindaddr configuration field useable.
Todo :
- set audio paths up (no native bridging) ;
- make the CLI gtalk functions available to jingle ;
- clean up the storage space used in strings.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@83743 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r83432 | russell | 2007-09-21 09:37:20 -0500 (Fri, 21 Sep 2007) | 4 lines
gcc 4.2 has a new set of warnings dealing with cosnt pointers. This set of
changes gets all of Asterisk (minus chan_alsa for now) to compile with gcc 4.2.
(closes issue #10774, patch from qwell)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@83433 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r82929 | russell | 2007-09-18 17:42:27 -0500 (Tue, 18 Sep 2007) | 11 lines
Add a new patch to handle interrupting the fgets() call when using FastAGI.
This version of the patch maintains the original behavior of the code when
not using FastAGI.
(closes issue #10553)
Reported by: juggie
Patches:
res_agi_fgets-4.patch uploaded by juggie (license 24)
res_agi_fgets_1.4svn.patch uploaded by juggie (license 24)
Slight mods by me
Tested by: juggie, festr
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@82931 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r82337 | russell | 2007-09-13 13:45:59 -0500 (Thu, 13 Sep 2007) | 4 lines
Only compile in tracking astobj2 statistics if dev-mode is enabled. Also, when
dev mode is enabled, register the CLI command that can be used to run the astobj2
test and print out statistics.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@82338 65c4cc65-6c06-0410-ace0-fbb531ad65f3
it doesn't free the slinfactory itself. (This isn't related to a bug, i'm just
looking over random code)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@81999 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ao2_hash_fn and ao2_callback_fn typedefs, in preparation
to more cleanup of the _search_flags
Please do not merge this change to 1.4 yet - there are no
functional changes anyways.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@81712 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r81599 | russell | 2007-09-05 15:53:41 -0500 (Wed, 05 Sep 2007) | 11 lines
Fix an issue that can occur when you do an attended transfer to parking. If
you complete the transfer before the announcement of the parking spot finishes,
then the channel being parked will hear the remainder of the announcement.
These changes make it so that will not happen anymore.
Basically, res_features sets a flag on the channel is playing the announcement
to so that the file streaming core knows that it needs to watch out for a
channel masquerade, and if it occurs, to abort the announcement.
(closes BE-182)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@81600 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r81448 | russell | 2007-09-04 13:37:44 -0500 (Tue, 04 Sep 2007) | 4 lines
Remove the typedefs on ao2_container and ao2_iterator. This is simply because
we don't typedef objects anywhere else in Asterisk, so we might as well make
this follow the same convention.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@81449 65c4cc65-6c06-0410-ace0-fbb531ad65f3
functions. As inline functions, the lock debug information will show that
these are always locked in audiohooks.h instead of the file where the lock was
actually acquired.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@81264 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Convert some spaces to tabs in func_volume
* Add a note in channel.h making it clear that none of the datastore API calls
lock the channel they are given, so the channel should be locked before
calling the functions that take a channel argument.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@81260 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: nic_bellamy
Patches:
2006-10-03_svn_44249_voicemail_lockmode_v3.patch uploaded by nic_bellamy (license 213)
Add support for configurable file locking methods. The default is "lockfile",
which is the old behavior. There is an additional option, "flock", which is
intended for use in situations where the lockfile method will not work, such as
with SMB/CIFS mounts.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@81233 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r80573 | russell | 2007-08-23 15:16:41 -0500 (Thu, 23 Aug 2007) | 5 lines
When executing a dynamic feature, don't look it up a second time by digit pattern
after we already looked it up by name. This causes broken behavior if there is
more than one feature defined with the same digit pattern.
(closes issue #10539, reported by bungalow, patch by me)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@80574 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r80426 | russell | 2007-08-22 17:54:03 -0500 (Wed, 22 Aug 2007) | 6 lines
Add some more documentation on iterating ao2 containers. The documentation
implies that is possible to miss an object or see an object twice while
iterating. After looking through the code and talking with mmichelson, I have
documented the exact conditions under which this can happen (which are rare and
harmless in most cases).
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@80427 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r80362 | russell | 2007-08-22 15:21:36 -0500 (Wed, 22 Aug 2007) | 34 lines
Merge changes from team/russell/iax_refcount.
This set of changes fixes problems with the handling of iax2_user and iax2_peer
objects. It was very possible for a thread to still hold a reference to one of
these objects while a reload operation tries to delete them. The fix here is to
ensure that all references to these objects are tracked so that they can't go away
while still in use.
To accomplish this, I used the astobj2 reference counted object model. This
code has been in one of Luigi Rizzo's branches for a long time and was primarily
developed by one of his students, Marta Carbone. I wanted to go ahead and bring
this in to 1.4 because there are other problems similar to the ones fixed by these
changes, so we might as well go ahead and use the new astobj if we're going to go
through all of the work necessary to fix the problems.
As a nice side benefit of these changes, peer and user handling got more efficient.
Using astobj2 lets us not hold the container lock for peers or users nearly as long
while iterating. Also, by changing a define at the top of chan_iax2.c, the objects
will be distributed in a hash table, drastically increasing lookup speed in these
containers, which will have a very big impact on systems that have a large number of
users or peers.
The use of the hash table will be made the default in trunk. It is not the default
in 1.4 because it changes the behavior slightly. Previously, since peers and users
were stored in memory in the same order they were specified in the configuration file,
you could influence peer and user matching order based on the order they are specified
in the configuration. The hash table does not guarantee any order in the container,
so this behavior will be going away. It just means that you have to be a little
more careful ensuring that peers and users are matched explicitly and not forcing
chan_iax2 to have to guess which user is the right one based on secret, host, and
access list settings, instead of simply using the username.
If you have any questions, feel free to ask on the asterisk-dev list.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@80387 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
(closes issue #10430)
........
r79904 | qwell | 2007-08-17 14:12:19 -0500 (Fri, 17 Aug 2007) | 11 lines
Don't send a semicolon over the wire in sip notify messages.
Caused by fix for issue 9938.
I basically took the code that existed before 9938 was fixed, and
copied it into a new function - ast_unescape_semicolon
There should be very few places this will be needed (pbx_config
does NOT need this (see issue 9938 for details))
Issue 10430, patch by me, with help/ideas from murf (thanks murf).
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@79905 65c4cc65-6c06-0410-ace0-fbb531ad65f3
in place of a very common construct. I also used it in a number of places
in chan_sip.
if (id > -1)
ast_sched_del(sched, id);
id = ast_sched_add(sched, ...);
changes to:
ast_sched_replace(id, sched, ...);
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@79861 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The way a device state change propagates is kind of silly, in my opinion. A
device state provider calls a function that indicates that the state of a
device has changed. Then, another thread goes back and calls a callback for
the device state provider to find out what the new state is before it can go
send it off to whoever cares.
I have changed it so that you can include the state that the device has changed
to in the first function call from the device state provider. This removes the
need to have to call the callback, which locks up critical containers to go find
out what the state changed to.
This change set changes the "simple" device state providers to use the new method.
This includes parking, meetme, and SLA.
I have also mostly converted chan_agent in my branch, but still have some more
things to think through before presenting the plan for converting channel drivers
to ensure all of the right events get generated ...
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@79027 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r78995 | russell | 2007-08-10 10:20:09 -0500 (Fri, 10 Aug 2007) | 4 lines
The last set of changes that I made to "core show locks" made it not able to
track mutexes unless they were declared using AST_MUTEX_DEFINE_STATIC. Locks
initialized with ast_mutex_init() were not tracked. It should work now.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@79005 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r78103 | mmichelson | 2007-08-03 15:25:22 -0500 (Fri, 03 Aug 2007) | 7 lines
Changed the behavior of sip's realtime_peer function to match the corresponding way of matching for non-realtime peers.
Now matches are made on both the IP address and port number, or if the insecure setting is set to "port" then just match on the
IP address.
In order to accomplish this, I also added a new API call, ast_category_root, which returns the first variable of an ast_category struct
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@78186 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r78184 | russell | 2007-08-06 11:50:54 -0500 (Mon, 06 Aug 2007) | 5 lines
Fix the return value of AST_LIST_REMOVE(). This shouldn't be causing any
problems, though, because the only code that uses the return value only checks
to see if it is NULL.
(closes issue #10390, pointed out by mihai)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@78185 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The problem was that res_crypto now has a RWLIST named "keys". The macro
for defining this list defines a function used as a constructor for the list
called "init_keys". However, there was another function called init_keys in
this module for a CLI command. The fix is just to prepend the generated
functions with underscores.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@78138 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r78095 | russell | 2007-08-03 14:39:49 -0500 (Fri, 03 Aug 2007) | 28 lines
Add some improvements to lock debugging. These changes take effect
with DEBUG_THREADS enabled and provide the following:
* This will keep track of which locks are held by which thread as well as
which lock a thread is waiting for in a thread-local data structure. A
reference to this structure is available on the stack in the dummy_start()
function, which is the common entry point for all threads. This information
can be easily retrieved using gdb if you switch to the dummy_start() stack
frame of any thread and print the contents of the lock_info variable.
* All of the thread-local structures for keeping track of this lock information
are also stored in a list so that the information can be dumped to the CLI
using the "core show locks" CLI command. This introduces a little bit of a
performance hit as it requires additional underlying locking operations
inside of every lock/unlock on an ast_mutex. However, the benefits of
having this information available at the CLI is huge, especially considering
this is only done in DEBUG_THREADS mode. It means that in most cases where
we debug deadlocks, we no longer have to request access to the machine to
analyze the contents of ast_mutex_t structures. We can now just ask them
to get the output of "core show locks", which gives us all of the information
we needed in most cases.
I also had to make some additional changes to astmm.c to make this work when
both MALLOC_DEBUG and DEBUG_THREADS are enabled. I disabled tracking of one
of the locks in astmm.c because it gets used inside the replacement memory
allocation routines, and the lock tracking code allocates memory. This caused
infinite recursion.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@78096 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r77788 | russell | 2007-07-30 14:13:31 -0500 (Mon, 30 Jul 2007) | 10 lines
(closes issue #10279)
Reported by: seanbright
Patches:
res_agi.carefulwrite.1.4.07252007.patch uploaded by seanbright (license 71)
res_agi.carefulwrite.trunk.07252007.patch uploaded by seanbright (license 71)
Allow the "agi_network: yes" line to be printed out in the AGI debug output.
Also, allow partial writes to be handled when writing out this line just like
it is for all of the others.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@77789 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Makes the structures handling external AGI commands a bit more thread-safe
- Makes AGI transparently work with both live and hungup channels
- DeadAGI is hence no longer necessary and is deprecated
- CLI bug fixes
- Commands will refuse to run if the channel is dead and the command is nonsensical
for dead channels.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@76707 65c4cc65-6c06-0410-ace0-fbb531ad65f3
using old methods of parsing arguments to using the standard macros. However, the big
change is that the really old way of specifying application and arguments separated by
a comma will no longer work (e.g. NoOp,foo|bar). Instead, the way that has been
recommended since long before 1.0 will become the only method available (e.g. NoOp(foo,bar).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@76703 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: snuffy
Patches:
doxygen-updates.diff uploaded by snuffy (license 35)
Another big batch of doxygen documentation updates
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@76559 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: bbryant
Patches:
20070720__core_debug_by_file.patch uploaded by bbryant (license 36)
(with some modifications by me)
Tested by: russell, bbryant
This set of changes introduces the ability to set the core debug or verbose
levels on a per-file basis. Interestingly enough, in 1.4, you have the ability
to set core debug for a single file, but that functionality was accidentally
lost in the conversion of the CLI commands to the new format.
This patch improves upon what was in 1.4 by letting you set it for more than 1
file, and by also supporting verbose.
*** Janitor Project ***
This patch also introduces a new macro, ast_verb(), which is similar
to ast_debug(). Setting the per file verbose value only works for messages that
use this macro. Converting existing uses of ast_verbose() can be done like:
if (option_debug > 2)
ast_verbose(VERBOSE_PREFIX_3 "Something useful\n");
...
ast_verb(3, "Something useful\n");
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@76555 65c4cc65-6c06-0410-ace0-fbb531ad65f3
(e.g. chan_sip.c in a subsequent commit).
Obviously exposing the internals of a data structure is far from ideal
(especially in a case like this where the implementation is very
inefficient and will need to be changed at some point).
On the other hand, it was also unclear what additional APIs should
we provide instead, and because exposing the stucture has no impact
on source and binary compatibility, this seemed to me the best option at
this time.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@76034 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Luigi Rizzo
Russell Bryant
Kevin P. Fleming
Tilghman Lesher
Jason Parker
Steve Murphy
Olle Johansson
Joshua Colp
Philippe Sultan
Dwayne M. Hubbard
Mark Michelson
Doug Bailey