* mwi_sub_event_cb: mwist leaked on separate_mailbox failure.
* add_email_attachment: A reference to sox_gain_tmpdir was used
after the storage was out of scope.
Change-Id: I6282c542ff7b82fa091177a912d11234a8b00a30
The Local channel has never supported app_transfer
from what I can see so remove it from the documentation.
ASTERISK-25649
Change-Id: Icbcfe297f6f866285a26b3e9fd5c6d00fa22e0e9
Remove nearly all use of regex from ACO users. Still remaining:
* app_confbridge has a legitamate use of option name regex.
* ast_sorcery_object_fields_register is implemented with regex, all
callers use simple prefix based regex. I haven't decided the best
way to fix this in both 13/15 and master.
Change-Id: Ib5ed478218d8a661ace4d2eaaea98b59a897974b
The approach with having a single global subscription to all extension
state changes has one issue: dynamically created hints don't have any
watchers and are therefore garbage collected on the first dialplan
reload.
This change creates a state subscription for every queue member with a
hint as state_interface, thus increasing the count of watches for
hints, so they are not destroyed prematurely anymore.
There are 2 side effects:
1. The state change callback in app_queue is not executed when
there are no members referring to the extension.
2. The callback is called multiple times for the same hint if it's
associated with more than one queue member.
Reported by: Steven T. Wheeler
ASTERISK-18411 #close
Change-Id: I4956af2136ea2a7f110ac9272eae5f6e676d8f89
There are many places in the code base where we ignore the return value
of fcntl() when getting/setting file descriptior flags. This patch
introduces a convenience function that allows setting or clearing file
descriptor flags and will also log an error on failure for later
analysis.
Change-Id: I8b81901e1b1bd537ca632567cdb408931c6eded7
Currently, when the app_voicemail sending VoicemailUserEntry AMI event, there's
no OldMessageCount info for default.
To check the OldMessageCount info, it required IMAP_STORAGE define, but this is
not correct.
Added OldMessageCount item as a default.
ASTERISK-27456
Change-Id: I5c71521c2d1daf8b7b161e31c34d28cca6aea4c7
Instead of specifying AST_MODFLAG_LOAD_ORDER with load_pri
AST_MODPRI_DEFAULT just use AST_MODFLAG_DEFAULT.
Change-Id: I0123258eafce324249433a69df15a85cc16e509f
Declare 'res' initialized to -1 to deal with earlier error paths that
could cause 'res' to be returned uninitialized.
Change-Id: I8ac2a5755bf4174d89ef893e924c940f702b104e
We've been calling pbx_builtin_setvar_helper to set the
RECORD_STATUS variable before actually closing the recorded file.
If a client is watching VarSet events and tries to do something with
the file when a RECORD_STATUS event is seen, they might attempt to
do so while the file it's still open.
We now delay calling pbx_builtin_setvar_helper until after we close
the file.
ASTERISK-27423
Change-Id: I7fe9de99953e46b4bafa2b38cf151fe8f6488254
When (v)asprintf() fails, the state of the allocated buffer is undefined.
The library had better not leave an allocated buffer as a result or no one
will know to free it. The most likely way it can return failure is for an
allocation failure. If the printf conversion fails then you actually have
a threading problem which is much worse because another thread modified
the parameter values.
* Made __ast_asprintf()/__ast_vasprintf() set the returned buffer to NULL
on failure. That is much more useful than either an uninitialized pointer
or a pointer that has already been freed. Many uses won't have to check
for failure to ensure that the buffer won't be double freed or prevent an
attempt to free an uninitialized pointer.
* stasis.c: Fixed memory leak in multi_object_blob_to_ami() allocated by
ast_asprintf().
* ari/resource_bridges.c:ari_bridges_play_helper(): Remove assignment to
the wrong thing which is now not needed even if assigning to the right
thing.
Change-Id: Ib5252fb8850ecf0f78ed0ee2ca0796bda7e91c23
* Stop using ast_module_helper to check if a module is loaded, use
ast_module_check instead (app_confbridge and app_meetme).
* Stop ast_module_helper from listing reload classes when needsreload
was not requested.
ASTERISK-27378
Change-Id: Iaed8c1e4fcbeb242921dbac7929a0fe75ff4b239
Fix typo, that specify usage wrong option 'dtmf-features' for CHANNEL() function
instead of correct 'dtmf_features'
ASTERISK-27377 #close
Change-Id: I15ecc829c1035b359584673e12cdb5c9291ac930
We were ignoring the return value from ast_pbx_outgoing_exten() and
ast_pbx_outgoing_app() which could fail before setting the reason code.
This resulted in failures being reported as success.
ASTERISK-25266 #close
Reported by: Allen Ford
Change-Id: Idf16237b7e41b527d2c69c865829128686beeb3b
The previous patch for ASTERISK-27216 made it so you wouldn't get any
position or periodic announcements unless you had announce-to-first-user
enabled. The announce-to-first-user feature was added by ASTERISK_21782
as a result of the patch which introduced the redundant announcements that
ASTERISK-27216 removes.
* By noting that the makeannouncement variable is used to suppresses the
first user announcement, we set its initial value to the
announce-to-first-user enable setting.
ASTERISK-27216
Change-Id: Ieaeb7dbea8ae7073086b775fbafe0625b000b10a
This patch reverts the change by patch 2263 from old reviewboard.
Note that reverting that 2263-patch still preserves the behaviour that
the commit log of the 2263-patch claimed to add. The reason for this is:
The function wait_for_answer is only called from try_calling which
in turn is only called from the main for loop in queue_exec, and
earlier in that loop we already check the things that's removed by
this patch. There's no need to check those things twice each loop
iteration, and I think the proper place to check it is before each
ringing cycle. By checking it in wait_for_answer, you allow the issue
explained in the jira - that the head caller hears announcements while
the agents' sip phones are actively ringing.
Reported-by: Stefan Engström
Tested-by: Stefan Engström
ASTERISK-27216 #close
Change-Id: Ic4290dc75256f9743900c6762ee1bb915f672db0
* WaitForSilence completes successfully if it receives no media in the
specified timeout, but when acting as WaitForNoise that logic needs
to be reversed.
* Use standard argument parsing macros and add some error checking for
invalid values.
* The documentation indicated that the first argument to both
WaitForSilence and WaitForNoise was required when it was not. Update
the documentation to reflect that.
* Wrap up some behavior in structs to avoid boolean checks all over the
place.
ASTERISK-24066 #close
Reported by: M vd S
Change-Id: I01d40adc5b63342bb5018a1bea2081a0aa191ef9
An admin can configure app_minivm with an externnotify program to be run
when a voicemail is received. The app_minivm application MinivmNotify
uses ast_safe_system() for this purpose which is vulnerable to command
injection since the Caller-ID name and number values given to externnotify
can come from an external untrusted source.
* Add ast_safe_execvp() function. This gives modules the ability to run
external commands with greater safety compared to ast_safe_system().
Specifically when some parameters are filled by untrusted sources the new
function does not allow malicious input to break argument encoding. This
may be of particular concern where CALLERID(name) or CALLERID(num) may be
used as a parameter to a script run by ast_safe_system() which could
potentially allow arbitrary command execution.
* Changed app_minivm.c:run_externnotify() to use the new ast_safe_execvp()
instead of ast_safe_system() to avoid command injection.
* Document code injection potential from untrusted data sources for other
shell commands that are under user control.
ASTERISK-27103
Change-Id: I7552472247a84cde24e1358aaf64af160107aef1
This prevents orphaned CBAnn channels from getting stuck in the bridge.
ASTERISK-26994 #close
Reported by: James Terhune
Change-Id: I5e43e832a9507ec3f2c59752cd900b41dab80457
mkstemp() returns a unique filename, but appending an extension to that
filename does not guarantee uniqueness. Instead, use mkdtemp() and we
can put whatever extension we want on the files that we create inside
the directory.
In the case of app_minivm, we also now properly clean up any temporary
files that we create.
ASTERISK-20858 #close
Reported by: Walter Doekes
Change-Id: I30ad04f0e115f0b11693ff678ba5184d8b938e43
If the Record() application is called with a relative filename that
includes directories, we were not properly creating the intermediate
directories and Record() would fail.
Secondarily, updated the documentation for RECORDED_FILE to mention
that it does not include a filename extension.
Finally, rewrote the '%d' functionality to be a bit more straight
forward and less noisy.
ASTERISK-16777 #close
Reported by: klaus3000
Change-Id: Ibc2640cba3a8c7f17d97b02f76b7608b1e7ffde2
Fixed to use correct initial value and fixed to use the
correct queue info to check the first value.
ASTERISK-27204
Change-Id: Ia9e36c828e566e1cc25c66f73307566e4acb8e73
GCC 7 has added capability to produce warnings, this fixes most of those
warnings. The specific warnings are disabled in a few places:
* app_voicemail.c: truncation of paths more than 4096 chars in many places.
* chan_mgcp.c: callid truncated to 80 chars.
* cdr.c: two userfields are combined to cdr copy, fix would break ABI.
* tcptls.c: ignore use of deprecated method SSLv3_client_method().
ASTERISK-27156 #close
Change-Id: I65f280e7d3cfad279d16f41823a4d6fddcbc4c88
The following testsuite voicemail tests were failing to re-enter the
mailbox after the first login attempt.
tests/apps/voicemail/authenticate_invalid_mailbox
tests/apps/voicemail/authenticate_invalid_password
The tests were noting the start of the vm-incorrect-mailbox prompt and
immediately sending the mailbox for the next login attempt. Since the
invalid message playback had to complete before the digits were
recognized, the test passed for the wrong reason and added approximately
20 seconds to the test times.
* Allow the vm-incorrect-mailbox prompt to get interrupted by the mailbox
digits like the initial vm-login prompt so the tests are able to enter the
intended mailbox.
Change-Id: I1dc53fe917bfe03a4587b2c4cd24c94696a69df8
In say_date_generic the timezonename parameter is passed but never
used. Fix it by passing it to the ast_localtime function.
ASTERISK-27124
Change-Id: I6afa98f9163190043244b9f3ba91eb1874d1b586
This commit fixes two possible scenarios:
* When recording name and if during recording you hangup, file is never
removed. This is due to the fact file location is nulled.
* When recording name and if you hangup during thank-you prompt, file
is never removed.
ASTERISK-27123 #close
Change-Id: I39b7271408b4b54ce880c5111a886aa8f28c2625
The primary focus of this patch is adding a missing call to
ast_odbc_release_obj(), but is also a general cleanup of the ODBC
related code in app_voicemail.
ASTERISK-27093 #close
Change-Id: I8e285142eaeb3146b4287a928276b70db76c902b
The fix for ASTERISK-25665 introduced a regression.
The return value of queue_exec used to be 0 in case of leavewhenempty
but it was changed to -1 (returned from wait_our_turn and passed
transparently by queue_exec), thus leading to hangup instead of returning
back to dialplan.
This commit resets the value back to 0 in this case, restoring
original behavior.
ASTERISK-27065 #close
Reported by: Marek Cervenka
Change-Id: Id9c83b75aeda463250155e88c5004be52bbca5ac
A new global option "imap_poll_logout" was added to specify whether need to
disconnect from the IMAP server after polling of mailboxes.
ASTERISK-27068 #close
Closing IMAP connection after loading mailbox from voicemail.conf
ASTERISK-24052 #close
Change-Id: Ib7558ba04516240a32b65f42e9be64372a0ae12a
A change was done which added an 'in_call' flag to queue
members that was set to true while talking to an agent.
Unfortunately in practice this does not accurately reflect
whether they are talking to an agent or not. If a Local
channel is involved and a transfer is performed then the
app_queue application would incorrectly think the agent
was still in a call with the caller. This was done to
fix a race condition between an agent becoming available
by device state and the checking of the last call information
for the wrapup time. There was a small window where the
last call information would be the previous value instead
of the new one.
This change goes about fixing the original issue in a
different way by considering the call completed if device
state is received which would make the agent available
and if they are currently in a call. If this occurs the
last call information is updated before the agent becomes
available ensuring that old information is not present
when checking if the member should be called. This also
improves the transfer situation by actually updating
and enforcing the wrapup time.
ASTERISK-26399
ASTERISK-26400
ASTERISK-26715
ASTERISK-26975
Change-Id: Ife1cb686e3173b3a6d368601adef9aff69d4beea
When user leaves a conference, its channel calls async_play_sound_file()
in order to play the name announcement and then unlinks the sound file.
The async_play_sound_file() function adds a task to conference playback queue,
which then runs playback_common() function in a different thread.
It leads to a race condition when, in some cases, channel thread may unlink
the sound file before playback_common() had a chance to open it.
This patch creates a file deletion task, that is queued after playback.
ASTERISK-27012 #close
Change-Id: I412f7922d412004b80917d4e892546c15bd70dd3
There are 2 places in app_queue.c that log EXITEMPTY event: one in
wait_our_turn, and another one in queue_exec in the loop trying to
call an agent after wait_our_turn.
In most cases it leads to logging EXITEMPTY twice.
ABANDON is also logged on two places, and in the rare case when an agent
and caller hang up simultaneously it's also possible to get duplicates
in queue_log.
This commit changes wait_our_turn to return -1 ("the caller should exit
the queue") instead of 0 ("the caller's turn has arrived") in case of
leaving when empty, so queue_exec skips the agent calling loop.
Also, leave_queue is now executed only once in this case, because 2nd
time is just a noop when the queue entry has already been removed.
Also, it sets qe->handled to -1 to indicate that the call was not
answered by an agent, but the necessary handling has already been done
in order to avoid logging an extra ABANDON entry.
ASTERISK-25665 #close
Reported by: Ove Aursand
Change-Id: I4578dd383bf2ac41589cf167865e8aaebcd4c11e
When manipulating flags on a channel the channel has to be
locked to guarantee that nothing else is also manipulating
the flags. This change introduces locking where necessary to
guarantee this. It also adds helper functions that manipulate
channel flags and lock to reduce repeated code.
ASTERISK-26789
Change-Id: I489280662dba0f4c50981bfc5b5a7073fef2db10
menu_template_handler wasn't properly accounting for the fact that
it might be called both during a load/reload (which isn't really
valid but not prevented) and by a dialplan function. In both cases
it was attempting to use the "pending" config which wasn't valid in
the latter case. aco_process_config is also partly to blame because
it wasn't properly cleaning "pending" up when a reload was done and
no changes were made. Both of these contributed to a crash if
CONFBRIDGE(menu,template) was called in a dialplan after a reload.
* aco_process_config now sets info->internal->pending to NULL
after it unrefs it although this isn't strictly necessary in the
context of this fix.
* menu_template_handler now uses the "current" config and silently
ignores any attempt to be called as a result of someone uses the
"template" parameter in the conf file.
Luckily there's no other place in the codebase where
aco_pending_config is used outside of aco_process_config.
ASTERISK-25506 #close
Reported-by: Frederic LE FOLL
Change-Id: Ib349a17d3d088f092480b19addd7122fcaac21a7
Cleaned up some of the incorrect uses of fread() and fwrite(), mostly in
the format modules. Neither of these functions will ever return a value
less than 0, which we were checking for in some cases.
I've introduced a fair amount of duplication in the format modules, but
I plan to change how format modules work internally in a subsequent
patch set, so this is simply a stop-gap.
Change-Id: I8ca1cd47c20b2c0b72088bd13b9046f6977aa872
In all non-pbx modules, AST_MODULE_LOAD_FAILURE has been changed
to AST_MODULE_LOAD_DECLINE. This prevents asterisk from exiting
if a module can't be loaded. If the user wishes to retain the
FAILURE behavior for a specific module, they can use the "require"
or "preload-require" keyword in modules.conf.
A new API was added to logger: ast_is_logger_initialized(). This
allows asterisk.c/check_init() to print to the error log once the
logger subsystem is ready instead of just to stdout. If something
does fail before the logger is initialized, we now print to stderr
instead of stdout.
Change-Id: I5f4b50623d9b5a6cb7c5624a8c5c1274c13b2b25
Queue member will get stuck in pending_members if queue calls a device
that is different from the one observed for state changes.
This patch removes members from pending_members as a result of channel stasis
events such as blind or attended transfers and hangup.
ASTERISK-26862 #close
Change-Id: I8bf6df487b9bb35726c08049ff25cdad5e357727
The queue_stasis_data structure contains various mutable fields that require
appropriate locking. Specifically, the 'dying,' 'member_uniqueid,' and
'caller_uniqueid' fields need to be locked when read from or written to.
Change-Id: I246b7dbff8447acc957a1299f6ad0ebd0fd39088
Dereferencing struct ast_autochan.chan without first calling
ast_autochan_channel_lock() is unsafe because the pointer could change at
any time due to a masquerade. Unfortunately, ast_autochan_channel_lock()
itself uses struct ast_autochan.chan unsafely and can result in a deadlock
if the original channel happens to get destroyed after a masquerade in
addition to the pointer getting changed.
The problem is more likely to happen with v11 and earlier because
masquerades are used to optimize out local channels on those versions.
However, it could still happen on newer versions if the channel is
executing a dialplan application when the channel is transferred or
redirected. In this situation a masquerade still must be used.
* Added a lock to struct ast_autochan to safely be able to use
ast_autochan.chan while trying to get the channel lock in
ast_autochan_channel_lock(). The locking order is the channel lock then
the autochan lock. Locking in the other direction requires deadlock
avoidance.
* Fix unsafe ast_autochan.chan usages in app_mixmonitor.c.
* Fix unsafe ast_autochan.chan usages in app_chanspy.c.
* app_chanspy.c: Removed unused autochan parameter from next_channel().
ASTERISK-26867
Change-Id: Id29dd22bc0f369b44e23ca423d2f3657187cc592
A caller can leave the Queue() application after being bridged with a
member in a few ways:
* Caller or member hangup
* Caller is transferred somewhere else (blind or atx)
* Caller is externally redirected elsewhere
The first 2 scenarios are currently handled by subscribing to stasis
messages, but the 3rd is not explicitly covered. If a caller is
redirected away from the Queue() application, the member who was last
bridged with that caller will remain in an "In use" state until the
caller hangs up.
This patch adds handling of the caller leaving the queue via
redirection. We monitor the caller-member bridge, and if the caller is
the one that leaves, we treat it the same as we would a caller hangup.
ASTERISK-26400 #close
Reported by: Etienne Lessard
Change-Id: Iba160907770de5a6c9efeffc9df5a13e9ea75334
* apps/app_voicemail.c fromstring field added to mailbox which will
override the global fromstring if set.
ASTERISK-24562 #close
Change-Id: I5e90e3a1ec2b2d5340b49a0db825e4bbb158b2fe
ast_load_realtime_multientry() returns an ast_config structure whose
ast_categorys are keyed with the empty strings. Several modules were
giving semantic meaning to the category names causing problems at
runtime.
* app_directory: Treated the category name as the mailbox name, and
would fail to direct calls to the appropriate extension after an
entry was chosen.
* app_queue: Queues, queue members, and queue rules were all affected
and needed to be updated.
* pbx_realtime: Pattern matching would never succeed because the
extension entered by the user was always compared to the empty
string.
Change-Id: Ie7e44986344b0b76ea8f6ddb5879f5040c6ca8a7
vm_authenticate doesn't always set the passed ast_vm_user argument, so
we initialize to 0 before passing it in.
ASTERISK-25893 #close
Reported by: Filip Jenicek
Change-Id: Ia3cc0128f93d352ed9add8d5c2f0f7232c2cbe4a
Original patch by John Covert, slight modifications by me.
ASTERISK-17428 #close
Reported by: John Covert
Patches:
app_voicemail.c.patch (license #5512) patch uploaded by
John Covert
Change-Id: Ic3361b0782e5a5397a19ab18eb8550923a9bd6a6
When attempting to use VoiceMailPlayMsg with a realtime data backend
the message is located, but never retrieved. This patch adds the
required RETRIEVE and DISPOSE calls that will fetch the message from
the database (and IMAP storage as well for that matter).
Also, removed extraneous make_file call.
ASTERISK-26723 #close
Change-Id: I1e122dd53c0f3d7faa10f3c2b7e7e76a47d51b8c
When using Record() with the silence detection feature, the stream is
written out to the given file. However, if only 'silence' is detected,
this file is then truncated to the first second of the recording.
This patch adds the 'u' option to Record() to override that behavior.
ASTERISK-18286 #close
Reported by: var
Patches:
app_record-1.8.7.1.diff (license #6184) patch uploaded by var
Change-Id: Ia1cd163483235efe2db05e52f39054288553b957
* app_minivm: Use built-in completion facilities to complete optional
arguments.
* app_voicemail: Use built-in completion facilities to complete
optional arguments.
* app_confbridge: Add missing colons after 'Usage' text.
* chan_alsa: Use built-in completion facilities to complete optional
arguments.
* chan_sip: Use built-in completion facilities to complete optional
arguments. Add completions for 'load' for 'sip show user', 'sip show
peer', and 'sip qualify peer.'
* chan_skinny: Correct and extend completions for 'skinny reset' and
'skinny show line.'
* func_odbc: Correct completions for 'odbc read' and 'odbc write'
* main/asterisk: Correct and extend completions for 'core show file
version.'
* main/astmm: Use built-in completion facilities to complete arguments
for 'memory' commands.
* main/bridge: Correct completions for 'bridge kick.'
* main/ccss: Use built-in completion facilities to complete arguments
for 'cc cancel' command.
* main/cli: Add 'all' completion for 'channel request hangup.' Correct
completions for 'core set debug channel.' Correct completions for 'core
show calls.'
* main/pbx_app: Remove redundant completions for 'core show
applications.'
* main/pbx_hangup_handler: Remove unused completions for 'core show
hanguphandlers all.'
* res_sorcery_memory_cache: Add completion for 'reload' argument of
'sorcery memory cache stale' and properly implement.
Change-Id: Iee58c7392f6fec34ad9d596109117af87697bbca
In Asterisk 11, if the 'Originate' AMI command failed to connect the provided
Channel while in extension mode, a 'failed' extension would be looked up and
run. This was, I believe, unintentionally removed in 51b6c49. This patch
restores that behavior.
This also adds an enum for the various 'synchronous' modes in an attempt to
make them meaningful.
ASTERISK-26115 #close
Reported by: Nasir Iqbal
Change-Id: I8afbd06725e99610e02adb529137d4800c05345d
We shouldn't unlock the channel after starting a snapshot staging because
another thread may interfere and do its own snapshot staging.
* app_dial.c:dial_exec_full() made hold the channel lock while setting up
the outgoing channel staging. Made hold the channel lock after the called
party answers while updating the caller channel staging.
* chan_sip.c:sip_new() completed the channel staging on off-nominal exit.
Also we need to use ast_hangup() instead of ast_channel_unref() at that
location.
* channel.c:__ast_channel_alloc_ap() added a comment about not needing to
complete the channel snapshot staging on off-nominal exit paths.
* rtp_engine.c:ast_rtp_instance_set_stats_vars() made hold the channel
locks while staging the channels for the stats channel variables.
Change-Id: Iefb6336893163f6447bad65568722ad5d5d8212a
With 500+ queues and a reload every minute, a random queue disappears
upon reload. The cause is mususe of the 'dead' flag. Namely, all queues
were marked dead up front, and then "resurrected" by dropping this flag
for those found in the configuration. But a queue marked dead can be
removed also when control leaves the app entry point on a PBX thread.
With this change, the queue is marked only not found, and at the end of
reload only the queues that are still not found are actually marked as
dead, so the dead flag is never reset, and set only on positively dead
queues.
ASTERISK-26755
Change-Id: I3a4537aec9eb8d8aeeaa0193407e3523feb004bf
Some (voicemail-related) tests API symlinks beep.gsm and other files
from ast_config_AST_VAR_DIR. It should use ast_config_AST_DATA_DIR.
ASTERISK-26740 #close
Change-Id: Id49c56fb9e16df64b1a2b829693ca7601252df89
In some cases member is added to pending_members, and the channel
is hung up before any extension state change. So the member would
stay in pending_members forever. So when we call do_hang, we
should also remove member from pending.
ASTERISK-26621 #close
Change-Id: Iae476b5c06481db18ebe0fa594b3e80fdc9a7d54
In 9785e8d0, app_echo was updated to relay video source updates to the
channel for the purposes of displaying video in WebRTC tests.
Unfortunately, this can cause a Kafkaesque nightmare if two or more
Local channels are in a bridge together where their ends are in
app_echo. When this situation occurs, a video update sent into app_echo
will cause the video update to be relayed to the other Local channels,
causing another round of video updates, etc. In not much time at all,
the channel length queues will be overwhelmed, channel alert pipes will
fail, and all hell will break loose as Asterisk merrily continues to
throw more video update requests onto the channels.
This patch updates app_echo to *only* relay a single video update. Once
a video update has been made, all further video updates are dropped.
This meets the intended purpose of the original patch: if we get a video
update and we're in app_echo, go ahead and ask the sender to update
themselves. However, once we've got that video stream sync'd up, don't
keep spamming the world.
Change-Id: I9210780b08d4c17ddb38599d1c64453adfc34f74
Given the scenario where multiple channels are dialed using Dial()
but the caller is picked up using PickupChan() all outgoing channels
except the channel specified to PickupChan() would be marked
as ringing until the call had been hung up.
When using the PickupChan application the channel executing the
application is swapped into place of another channel. As part
of this process the channel is answered. The Dial application
has explicit logic which checks if the channel is answered,
cancels all other outgoing channels, and bridges. This logic is
different than the normal logic that is executed when an outgoing
channel is answered. This different logic failed to publish dial
events stating that the other outgoing channels had been canceled.
As a result references to the outgoing channels were held onto by
the dial masquerade process until the call had been ended and
the channels had gone away. This would result in the channels
appearing in the "core show channels" list despite not being present
anymore and would also result in incorrect device state.
This change makes it so that this logic also publishes
dial events stating that the other outgoing channels have been
canceled.
ASTERISK-26549
Change-Id: Iea7168e6e82f7d4609ec0366153804e4f55ea64f
When executing the MailboxExists dialplan application and
MAILBOX_EXISTS dialplan function the passed in temporary voice
mailbox was not cleared, causing it to try to free garbage.
ASTERISK-26503 #close
Change-Id: Ie21ccfa1b80b9c59318e596f6b8e17da2b5a7cb3
When using Asterisk Realtime Architecture, empty fields are skipped and the
default values are used. If the "context" parameter in queue was set and then
cleared from the database, the old value remains in memory and it continues
to be used. This change initialize the "context" parameter with an empty value,
allowing clearing the parameter.
ASTERISK-26462 #close
Change-Id: I64be73d5044ce38dd02408bd0e53de965ef65905
Added needed UTF-8 checks before constructing json objects in various
files for strings obtained outside the system. In this case string values
from a channel driver's peer and not from the user setting channel
variables.
* aoc.c: Fixed type mismatch in s_to_json() for time and granularity json
object construction.
ASTERISK-26466
Reported by: Richard Mudgett
Change-Id: Iac2d867fa598daba5c5dbc619b5464625a7f2096
The pause reason is not always cleared when it should be cleared.
* Made set_queue_member_pause() always clear pause reason if not pausing
with a reason string.
Change-Id: I993dad19626ec017478a230e980989438b778c53
The "Q" option will set the cause on the unanswered channels when
another channel answers. It overrides the default of
ANSWERED_ELSEWHERE.
NOTE: chan_sip does not support setting the cause on a CANCEL to
anything other than ANSWERED_ELSEWHERE.
ASTERISK-26446 #close
Change-Id: I71742e0919aaa16784c30a2b2e73fbeed7672e47
The output of CLI "queue show" and AMI Queues action is truncated and
"failed to extend from 240 to 327" messages are generated if the queue
member and interface names are lengthy.
* Increase the string buffer size from 240 to 512 in order to accommodate
for more information fields added to the output since v1.8.
ASTERISK-26360 #close
Reported by: Richard Mudgett
Change-Id: Id99c03cf5362453b80491a4b3b0434cb67aa966d
Some configuration directives were not initialized on reload, and hence
were not reset to default if they were removed from followme.conf.
ASTERISK-26288 #close
Change-Id: Ief829e16374ad1e0ecfd63e6ee4923b5a1d1c150
In any scenario in which the callee is not connected to the caller, the
current code in app_dial will crash due to raising a Dial End Stasis
Message after the callee channel has been hung up. This patch corrects
the error by simply moving the explicit hangup of the callee (peer)
channel until after the dial end message.
ASTERISK-25691 #close
Change-Id: I816a414014424d0d8c80e2a3cbef13ef8c63798d
If the callee selects option '5' using the Dial application's privacy
(P) option, the DIALSTATUS is erroneously set to ANSWER. This option
reflects the callee sending the caller to VoiceMail one time; the call
is definitely *not* ANSWERed in such a scenario. With this patch, the
DIALSTATUS is instead set to NOANSWER, which is the same DIALSTATUS that
is set when the 'send to VoiceMail every time' option is set.
ASTERISK-25691
Change-Id: Iaf0c9f0fa00545e7366443875e2bb7d9a89a1358
Confbridge announcements tend to block a channel while they are being
played. In some circumstances, this is warranted since you want that
particular channel not to hear the announcement (Example: "John Doe has
entered the conference"). For others it makes less sense.
This change first introduces methods for playing sounds asynchronously
into the conference. This is very similar to how synchronous sounds are
played, except the channel initiating the playback does not wait for the
sound to complete before moving on.
Asynchronous announcements are used for two circumstances:
* Sounds played for a user after they have left the bridge
* Sounds that play first to a single user and then the rest of the
conference (if the channel and conference use the same language)
ASTERISK-26289 #close
Reported by Mark Michelson
Change-Id: Ie486bb3de1646d50894489030326a423e594ab0a
Previously, the buffer used for MP3 streamed from HTTP servers had a size of
1 MB. For 8 kHz mono audio at 16 bit resolution, such a buffer covers about 1
minute. Only when the buffer is full does audio start to play.
For MP3 files streamed from a server, that is usually not a big deal as long as
the connection to the server is fast enough to supply that much data within a
second or two. For MP3 live streams however, it takes 1 minute to download 1
minute of audio, so without this change, app_mp3 wasn't really usable for MP3
live streams.
This commit changes the buffer size so that it covers 6 seconds of an MP3 file
streamed from a server and 0.5 seconds of an MP3 live stream. The latter is
identified by the use of a .m3u file extension.
app_mp3 so far only supported 8 kHz audio.
Now it always runs at the sample rate of the channel.
ASTERISK-26085 #close
Change-Id: Id1ee274733cd804a0edecf7450329b72f1235af0
As described in issue ASTERISK-26282 the AEL parser creates macros with
extension '~~s~~'. app_macro searches only for extension 's' so the
created extension cannot be found. with this patch app_macro searches for
both extensions and performs the right extension.
ASTERISK-26282 #close
Change-Id: I939aa2a694148cc1054dd75ec0c47c47f47c90fb
When dialing channels it is possible that they may not ever
leave the not in use state (Local channels in particular) by
the time we cancel them. If this occurs but we know they were
dialed we explicitly remove them from the pending members
container so that subsequent call attempts occur.
ASTERISK-26299 #close
Change-Id: I6ad0d17c36480c92cebf840626228ce3f7e4bd65
NOTE: This patch was submitted earlier and reverted because of a failing
test. The test has been patched so that it adjusts for the changes here,
so this is being resubmitted for review.
One feature that confbridge has is the ability to play sounds to all
participants in the conference. Prior to this commit, the algorithm for
this was as follows:
* Grab the playback lock
* Push the conference announcer channel into the bridge
* Play back the sound
* Pull the conference announcer channel from the bridge
* Release the playback lock
The issue here is that the act of adding the playback channel to the
bridge and removing it for each announcement is expensive. Amongst the
expenses:
* The announcer channel is imparted into the bridge, meaning a new
thread is spun up for each playback.
* When the announcer is added or removed from the bridge, it results
in the BRIDGEPEER channel variable being set on all channels in the
bridge. This requires keeping the bridge locked and locking each
individual channel in order to set it.
* There's also just the general overhead of adding the channel and
removing it from the bridge. The bridge potentially has to reconfigure
every single time
With this commit, the paradigm for playing back announcements has
shifted.
* The announcer channel is now added to the bridge when the conference
is allocated, and it is hung up when the conference is destroyed.
* A taskprocessor is used to queue playbacks onto the announcer channel.
This keeps the behavior from before where playbacks do not overlap.
* The announcer channel is no longer placed into the bridge as
departable. Since we are not constantly removing the channel from
the bridge, it is safe to add the channel using an independent thread
and simply hang the channel up when it is time for the conference to
be destroyed.
The use of the taskprocessor for playbacks opens up the interesting
possibility of having asynchronous announcements played. In this commit,
however, the behavior is still exactly the same as it previously was.
ASTERISK-26289
Reported by Mark Michelson
Change-Id: Ica9fa4907c2f3728cdd1cf0bc564ef4eb40754a0
One feature that confbridge has is the ability to play sounds to all
participants in the conference. Prior to this commit, the algorithm for
this was as follows:
* Grab the playback lock
* Push the conference announcer channel into the bridge
* Play back the sound
* Pull the conference announcer channel from the bridge
* Release the playback lock
The issue here is that the act of adding the playback channel to the
bridge and removing it for each announcement is expensive. Amongst the
expenses:
* The announcer channel is imparted into the bridge, meaning a new
thread is spun up for each playback.
* When the announcer is added or removed from the bridge, it results
in the BRIDGEPEER channel variable being set on all channels in the
bridge. This requires keeping the bridge locked and locking each
individual channel in order to set it.
* There's also just the general overhead of adding the channel and
removing it from the bridge. The bridge potentially has to reconfigure
every single time
With this commit, the paradigm for playing back announcements has
shifted.
* The announcer channel is now added to the bridge when the conference
is allocated, and it is hung up when the conference is destroyed.
* A taskprocessor is used to queue playbacks onto the announcer channel.
This keeps the behavior from before where playbacks do not overlap.
* The announcer channel is no longer placed into the bridge as
departable. Since we are not constantly removing the channel from
the bridge, it is safe to add the channel using an independent thread
and simply hang the channel up when it is time for the conference to
be destroyed.
The use of the taskprocessor for playbacks opens up the interesting
possibility of having asynchronous announcements played. In this commit,
however, the behavior is still exactly the same as it previously was.
ASTERISK-26289
Reported by Mark Michelson
Change-Id: Ic5cd2c4b98a1eaa1715eb7a5b35d62f1a76d78a5
* Add some helpful <literal> and other embedded paragraph tags
* Document some of the lesser known channel variables set by Dial
* Add examples for some common Dial uses, along with some more
challenging but useful options
Change-Id: Ib2fb9301e8e044d14fbb2815ec64161f19bbfbc1
When a call forward attempt is made from a Queue member, the current
code will hang up the forwarding channel in an off-nominal condition
prior to raising the Stasis events informing the rest of Asterisk that
the call was forwarded. This will result in a slew of dreaded FRACKs,
most likely leading to a crash.
This patch modifies the code such that we don't hang up the forwarding
channel even in an off-nominal condition until we've safely raised the
Stasis messages.
ASTERISK-25797 #close
Change-Id: Ife5abed351691fd79105321636eaa8ea8dcdba38
On heavy loaded system with IMAP or DB storage,
'app_voicemail' taskprocessor queue could reach 500 scheduled tasks.
It could happen when the IMAP or DB server dies or is unreachable.
It could happen on startup when there are many (thousands)
realtime endpoints configured with unsolicited mwi.
If the taskprocessor queue reaches the high water level
then the alert is triggered and pjsip stops processing new requests
until the queue reaches the low water level to clear the alert.
This patch adds 2 new 'general' configuration options
to tune taskprocessor alert levels:
'tps_queue_high' - Taskprocessor high water alert trigger level.
'tps_queue_low' - Taskprocessor low water clear alert level
ASTERISK-26229 #close
Change-Id: I766294fbffedf64053c0d9ac0bedd3109f043ee8
If AST_TEST_DEFINE is not conditional to TEST_FRAMEWORK it produces dead
code. This places all existing unit tests into a conditional block if
they weren't already.
ASTERISK-26211 #close
Change-Id: I8ef83ee11cbc991b07b7a37ecb41433e8c734686
It is possible for a not in use state change to occur multiple
times causing a queue member to be removed from the pending call
container prematurely.
The first not in use state change will remove the queue member
from the container. At this moment the member may be called and
placed in the pending container. After this another not in use
state change can be received which will remove it from the
container. Despite being called at this point the code will
incorrectly see that there are no pending calls to it.
This change only removes it from the pending container if the
state has actually changed.
ASTERISK-26133 #close
patches:
app_queue.diff submitted by Richard Miller (license 5685)
Change-Id: Ie5a7f17a44f98e9159e9b85009ce3f8393aa78c0
Added a new channel variable FORWARDERNAME which indicates which
channel was responsible for a forwarding requests received on dial attempt.
Fixed a bug in the app_queue: FORWARD_CONTEXT is not used.
ASTERISK-26059 #close
Change-Id: I34e93e8c1b5e17776a77b319703c48c8ca48e7b2
Fixed some bugs:
- create dirpath when save downloading message from IMAP storage.
- create IMAP folder if not exists when saving to IMAP storage
- check if file successfully opened before write to it
- some IMAP checks
- remove non-standard flag 'Unseen'
etc
Change to debug IMAP mm_status log instead of verbose.
Remove unused X-Asterisk-VM-Caller-channel message header
for security reason. The clients should not know name of peer/endpoint.
ASTERISK-26045 #close
Change-Id: I7f83d88b69b36934e2539c114b9fb612deed971b
FollowMe with the option a records the name of the caller and plays it
to the callee. However it has failed to clean up that recorded file
as it tried to delete the file name without the '.sln' extension.
ASTERISK-26008 #close
Change-Id: I79d7b1be7d5cde57bf076d9389e2a8a4422776ec
Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
This patch allows for having app_confbridge register the name of the
conference as an extension into a specific context, similar to
regcontext for chan_sip. This variant is not quite as involved as the
one in chan_sip and doesn't allow for multiple contexts or custom
extensions, you can only specify the context and the conference name
will always be used as the extension to register.
ASTERISK-25989 #close
Change-Id: Icacf94d9f2b5dfd31ef36f6cb702392619a7902f
Voicemail email addresses can be corrupt or voicemail
emails can end up being sent to the wrong email address if asterisk is
reading voicemail.conf during a reload and processing an email at the
same time. This patch always copies the struct that would otherwise only
be copied once.
ASTERISK-24463 #close
Reported by: John Campbell
Tested by: Etienne Lessard
Tested by: Andrew Nagy
Change-Id: I3a0643813116da84e2617291903d0d489b7425fb
When unloading the app_queue module the members in each queue are
destroyed and as part of this they are removed from the pending
members container. Unfortunately a crash would occur as the container
was destroyed before the members were removed.
This change tweaks ordering so the container destruction occurs
after the members are destroyed.
ASTERISK-16115
Change-Id: I48c728668c55aee3d05b751a5d450fb57e87f44b
It was possible for a queue member that is a member of at least 2 or more
queues to receive mulitiple calls at the same time. This happened because
of a race between when a member was being rung and when the device state
notified the other queue(s) member object of the state change.
This patch makes it so when a queue member is being rung it gets added to
a global pool of queue members. If that same member is tried again, e.g.
from another queue, and it is found to already exist in the pending member
container then it will not ring that member.
ASTERISK-16115 #close
Change-Id: I546dd474776d158c2b6be44205353dee5bac7e48
You cannot reference the passed in features struct after calling
ast_bridge_impart(). Even if the call fails.
Change-Id: I902b88ba0d5d39520e670fb635078a367268ea21
This module is used as part of testsuite tests to confirm
stuff works. I'm accordingly marking it as core as it is
required by those tests.
Change-Id: I558e7af7679b22b8ed641d7dd37ee4ca35b11e88
The test_voicemail_notify_endl test checks the end-of-line
characters of an email message to confirm that they are consistent.
The test wrongfully assumed that reading from the email message
into a buffer will always result in more than 1 character being
read. This is incorrect. If only 1 character was read the test
would go outside of the buffer and access other memory causing
a crash.
The test now checks to ensure that 2 or more characters are read
in ensuring the test stays within the buffer.
ASTERISK-25874 #close
Change-Id: Ic2c89cea6e90f2c0bc2d8138306ebbffd4f8b710
If try to move message to Cust1 (number 5)
the function 'save_to_folder' tries to create Greeting folder instead of Cust1.
This patch fixed it by setting GREETINGS_FOLDER = -1
ASTERISK-24927 #close
Change-Id: I03d1a761894bcc2d130ec9b003bbcddc28e25c51
Sometimes uw-imap function 'mail_fetchbody' returns huge len
which then pass to uw-imap function 'rfc822_base64'.
uw-imap tries to allocate huge memory and abort() on fail.
This patch check the len.
If the len more than max size (128 Mbytes) log error.
This patch also set variables len, newlen to avoid uninizialezed len.
This patch also check pointer returned by rfc822_base64.
ASTERISK-25899 #close
Change-Id: I4a0e7d655f11abef6a5224e2169df6d5c1f1caca
When using app_echo via WebRTC with VP8 video the video would appear
only after a few minutes, because there would be nothing to request
a full reference frame.
This fixes the problem in both ways:
- echos any VIDUPDATE frames received on the channel
- sends one such frame when first video frame is to be forwarded
This makes the echo work with Firefox and Chrome WebRTC implementation.
ASTERISK-25867 #close
Change-Id: I73bda87bf7532ee8bfb28d917045a21034908c1e
The configuration unsigned integer option handler sets flags for the
parser as if the option should be a signed integer (PARSE_INT32),
leading to errors on "out of range" values. Fix flags (PARSE_UINT32).
A fix to res_pjsip is also present which stops invalid flags from
being passed when registering sorcery object fields for qualify
status.
ASTERISK-25612 #close
Change-Id: I96b539336275e0e72a8e8033487d2c3344debd3e
Corey Farrell
Jenkins2
Joshua Colp
Ivan Poddubny
Sean Bright
Sungtae Kim
George Joseph
Richard Mudgett
Igor Goncharovskiy
Nathan Bruning
StefanEng86
Niklas Larsson
Holger Hans Peter Freyther
Sergej Kasumovic
Alexei Gradinari
Robert Mordec
zuul
Daniel Journo
rrittgarn
kkm
Tzafrir Cohen
Martin Tomec
Matt Jordan
Sebastian Gutierrez
Leandro Dardini
Mark Michelson
Michael Kuron
chrisderock
Jaco Kroon
Andrew Nagy
Kevin Harwell
DarkS
ibercom
Jacek Konieczny
Gianluca Merlo