The Dial and Queue I option is intended to block connected line updates
and redirecting updates. However, it is a feature that when a call is
locally redirected, the I option is disabled if the redirected call runs
as a local channel so the administrator can have an opportunity to setup
new connected line information. Unfortunately, the Dial and Queue I
option is disabled for *all* forked calls if one of those calls is
redirected.
* Make the Dial and Queue I option apply to each outgoing call leg
independently. Now if one outgoing call leg is locally redirected, the
other outgoing calls are not affected.
* Made Dial not pass any redirecting updates when forking calls.
Redirecting updates do not make sense for this scenario.
* Made Queue not pass any redirecting updates when using the ringall
strategy. Redirecting updates do not make sense for this scenario.
* Fixed deadlock potential with chan_local when Dial and Queue send
redirecting updates for a local redirect.
* Converted the Queue stillgoing flag to a boolean bitfield.
(closes issue ASTERISK-19511)
Reported by: rmudgett
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/1920/
........
Merged revisions 367678 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 367679 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@367693 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Adds a number of methods for controlling the setting of 'ringinuse'
which is basically the same concept as the old ignorebusy setting,
only now the per member setting always controls whether or not the
member is actually ringed while in use. A CLI command and a manager
action have been added to change a given queue member's ringinuse
option while Asterisk is running and the an argument has been added
for adding members with deliberately set ringinuse in queues.conf
Some effort has been made to ensure compatability with dialplans and
databases still referring to 'ignorebusy'.
(issue ASTERISK-19536)
reported by: Philippe Lindheimer
Review: https://reviewboard.asterisk.org/r/1919/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@367080 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch addresses a number of memory leaks in a variety of modules that were
found by a static analysis tool. A brief summary of the changes:
* app_minivm: free ast_str objects on off nominal paths
* app_page: free the ast_dial object if the requested channel technology
cannot be appended to the dialing structure
* app_queue: if a penalty rule failed to match any existing rule list
names, the created rule would not be inserted and its memory
would be leaked
* app_read: dispose of the created silence detector in the presence of
off nominal circumstances
* app_voicemail: dispose of an allocated unique ID field for MWI event
un-subscribe requests in off nominal paths; dispose of
configuration objects when using the secret.conf option
* chan_dahdi: dispose of the allocated frame produced by ast_dsp_process
* chan_iax2: properly unref peer in CLI command "iax2 unregister"
* chan_sip: dispose of the allocated frame produced by sip_rtp_read's
call of ast_dsp_process; free memory in parse unit tests
* func_dialgroup: properly deref ao2 object grhead in nominal path of
dialgroup_read
* func_odbc: free resultset in off nominal paths of odbc_read
* cli: free match_list in off nominal paths of CLI match completion
* config: free comment_buffer/list_buffer when configuration file load
is unchanged; free the same buffers any time they were
created and config files were processed
* data: free XML nodes in various places
* enum: free context buffer in off nominal paths
* features: free ast_call_feature in off nominal paths of applicationmap
config processing
* netsock2: users of ast_sockaddr_resolve pass in an ast_sockaddr struct
that is allocated by the method. Failures in
ast_sockaddr_resolve could result in the users of the method
not knowing whether or not the buffer was allocated. The
method will now not allocate the ast_sockaddr struct if it
will return failure.
* pbx: cleanup hash table traversals in off nominal paths; free
ignore pattern buffer if it already exists for the specified
context
* xmldoc: cleanup various nodes when we no longer need them
* main/editline: various cleanup of pointers not being freed before being
assigned to other memory, cleanup along off nominal paths
* menuselect/mxml: cleanup of value buffer for an attribute when that attribute
did not specify a value
* res_calendar*: responses are allocated via the various *_request method
returns and should not be allocated in the various
write_event methods; ensure attendee buffer is freed if no
data exists in the parsed node; ensure that calendar objects
are de-ref'd appropriately
* res_jabber: free buffer in off nominal path
* res_musiconhold: close the DIR* object in off nominal paths
* res_rtp_asterisk: if we run out of ports, close the rtp socket object and free
the rtp object
* res_srtp: if we fail to create the session in libsrtp, destroy the
temporary ast_srtp object
(issue ASTERISK-19665)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/1922
........
Merged revisions 366880 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 366881 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@366917 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is the starting point for the Asterisk 11: Who Hung Up work and provides
a framework which will allow channel drivers to report the types of hangup
cause information available in SIP_CAUSE without incurring the overhead of the
MASTER_CHANNEL dialplan function. The initial implementation only includes
cause generation for chan_sip and does not include cause code translation
utilities.
This change deprecates SIP_CAUSE and replaces its method of reporting cause
codes with the new framework. This change also deprecates the 'storesipcause'
option in sip.conf.
Review: https://reviewboard.asterisk.org/r/1822/
(Closes issue SWP-4221)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@366408 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Simplify some code in app_dial and app_queue by calling
ast_app_exec_macro() and ast_app_exec_sub().
* Fix minor locking issue in app_dial for post-answer macro/gosub
MACRO/GOSUB_RESULT=GOTO: handling.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@363269 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This should (and does in my testing) act just like the Dial option of the same name.
This allows a queue member to be transfered to the next priority (no args), or to
a context/extension/priority similar to goto (with args context^extension^priority)
when a caller hangs up on them.
(closes issue ASTERISK-19283)
Reported by: To
Patches:
queue_f-v3.diff uploaded by To (license 6347)
Review: https://reviewboard.asterisk.org/r/1785/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357861 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit adds GoSub alternatives to connected line, redirecting, and CCSS
macro hooks so that macro can finally be deprecated. This also adds
deprecation warnings for those features when used and in documentation.
Review: https://reviewboard.asterisk.org/r/1760/
(closes issue SWP-4256)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357013 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Continue channel opaque-ification by wrapping all of the stringfields.
Eventually, we will restrict what can actually set these variables, but
the purpose for now is to hide the implementation and keep people from
adding code that directly accesses the channel structure. Semantic
changes will follow afterward.
Review: https://reviewboard.asterisk.org/r/1661/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@352348 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Previously, realtime queues could be loaded without defining the queue member
table. This allowed for queue members to be dynamic, while the realtime
queue definitions could exist in some backing storage. Revision 342223 broke
this when it changed the return value for realtime_multientry to return NULL
when no results are returned. Previously, an empty ast_config object was
expected.
(closes issue ASTERISK-19170)
Reported by: Rene Mendoza
Tested by: Rene Mendoza
Patches:
rt_queue_member_patch.diff uploaded by Matt Jordan (license 6283)
........
Merged revisions 350552 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 350553 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@350554 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There are many benefits to making the ast_channel an opaque handle, from
increasing maintainability to presenting ways to kill masquerades. This patch
kicks things off by taking things a field at a time, renaming the field to
'__do_not_use_${fieldname}' and then writing setters/getters and converting the
existing code to using them. When all fields are done, we can move ast_channel
to a C file from channel.h and lop off the '__do_not_use_'.
This patch sets up main/channel_interal_api.c to be the only file that actually
accesses the ast_channel's fields directly. The intent would be for any API
functions in channel.c to use the accessor functions. No more monkeying around
with channel internals. We should use our own APIs.
The interesting changes in this patch are the addition of
channel_internal_api.c, the moving of the AST_DATA stuff from channel.c to
channel_internal_api.c (note: the AST_DATA stuff will have to be reworked to
use accessor functions when ast_channel is really opaque), and some re-working
of the way channel iterators/callbacks are handled so as to avoid creating fake
ast_channels on the stack to pass in matching data by directly accessing fields
(since "name" is a stringfield and the fake channel doesn't init the
stringfields, you can't use the ast_channel_name_set() function). I went with
ast_channel_name(chan) for a getter, and ast_channel_name_set(chan, name) for a
setter.
The majority of the grunt-work for this change was done by writing a semantic
patch using Coccinelle ( http://coccinelle.lip6.fr/ ).
Review: https://reviewboard.asterisk.org/r/1655/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@350223 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The function QUEUE_MEMBER has two required parameters (queuename, option). It
was only checking for the presence of queuename. The patch checks for the
existence of the option parameter and provides better error logging when
invalid values are provided for the option parameter as well.
........
Merged revisions 348211 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@348215 65c4cc65-6c06-0410-ace0-fbb531ad65f3
r325483 caused a regression in Asterisk 10+ that would make Asterisk segfault when
attempting to set penalty on an interface without specifying a queue in the queue set
penalty CLI command. In addition, no attempt would be made whatsoever to perform the
penalty setting on all the queues in the core list with either the cli command or the
non-segfaulting ami equivalent. This patch fixes that and also makes an attempt to
document and rename some functions required by this command to better represent what
they actually do. Oh yeah, and the use of this command without specifying a specific
queue actually works now.
Review: https://reviewboard.asterisk.org/r/1609/
........
Merged revisions 347656 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@347658 65c4cc65-6c06-0410-ace0-fbb531ad65f3
It was strange that the AgentCalled AMI event would get most of its
information from the incoming channel but then get the CallerID
information from the outgoing channel. Before connected line support was
added, this information was always the same at this point.
(closes issue ASTERISK-18152)
Reported by: Thomas Farnham
Tested by: rmudgett
........
Merged revisions 344536 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 344537 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@344538 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Despite an ominous sounding comment stating that membercount was for "logged
in" members only and thus we couldn't use ao2_container_count(), I could not
find a single place in the code where that seemed to be accurate. The only time
we decremented membercount was when we were marking something dead or actually
removing it. The only places we incremented it were either after ao2_link(), or
trying to correct for having set it to 0 during a reload. In every case where
we were correcting the value, it seemed that we were trying to make the count
actually match what ao2_container_count() would return. The only place I could
find where we made a determination about something being "logged in" or not, we
didn't trust the membercount, but instead looked at devicestate, paused, etc.
This patch removes membercount, replaces its use with ao2_container_count, and
manually adds the results of ao2_container_count to a "membercount" field for
ast_data queue query results. This patch also would fix AST-676, but as it is
slightly riskier than the previously committed fix, the two commits have been
made separately.
Reivew: https://reviewboard.asterisk.org/r/1541/
........
Merged revisions 342383 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 342384 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@342385 65c4cc65-6c06-0410-ace0-fbb531ad65f3
To use the new OBJ_KEY flag, the container hash and compare callback
functions must be updated to support OBJ_KEY. Otherwise, bad things
happen.
(issue ASTERISK-14769)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@342112 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
........
r341580 | irroot | 2011-10-20 19:13:23 +0200 (Thu, 20 Oct 2011) | 15 lines
Add option to check state when state is unknown
r341486 reverts r325483 this is a rework of the patch.
optimize to minimize load.
add option check_state_unknown to control whether a member with unknown
device state is checked there is a small % chance that calls will be sent
to the member when they on a call.
app_queue will see a device with unknown state as available and does not
try verify the state without this option enabled.
Review: https://reviewboard.asterisk.org/r/1535/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@341583 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
........
r341486 | mnicholson | 2011-10-19 16:23:17 -0500 (Wed, 19 Oct 2011) | 18 lines
Fix a performance regression introduced in r325483.
The regression was caused by a call to ast_parse_device_state() in app_queue's
ring_entry() function. The ast_parse_device_state() function eventually calls
ast_channel_get_full() with a channel name prefix which causes it to walk the
channel list causing massive lock contention and slow downs.
This patch fixes the regression by removing the call to
ast_parase_device_state() which should be unnecessary. Queue member device
state should be maintained by device state events. Some users have seen
instances where busy agents were called when they shouldn't have, which is the
reason the call to ast_parse_device_state() was added. That change appears to
have resolved that issue but also causes this performance regression. There may
still be issues with queue member status, and if so, alternative methods should
be investigated to resolve them.
AST-695
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@341487 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r336094 | irroot | 2011-09-15 17:54:46 +0200 (Thu, 15 Sep 2011) | 26 lines
Merged revisions 336093 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r336093 | irroot | 2011-09-15 17:46:21 +0200 (Thu, 15 Sep 2011) | 20 lines
Locking order in app_queue.c causes deadlocks.
a channel lock must never be held with the queues container lock held.
the deadlock occured on masquerade.
the queues container lock is a relic of the past the old queue module lock.
with ao2 there is no need to hold this lock when dealing with members this
patch removes unneeded locks.
(closes issue ASTERISK-18101)
(closes issue ASTERISK-18487)
Reported by: Paul Rolfe, Jason Legault
Tested by: irroot, Jason Legault, Paul Rolfe
Reviewed by: Matthew Nicholson
Review: https://reviewboard.asterisk.org/r/1402/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@336095 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r333011 | rmudgett | 2011-08-23 13:15:49 -0500 (Tue, 23 Aug 2011) | 19 lines
Merged revisions 333010 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r333010 | rmudgett | 2011-08-23 13:14:01 -0500 (Tue, 23 Aug 2011) | 12 lines
Memory Leak in app_queue
The patch that was committed in the 1.6.x versions of Asterisk for
ASTERISK-15862 actually fixed two issues. One was not applicable to 1.8
but the other is. queue_leak.patch fixes the portion applicable to 1.8.
(closes issue ASTERISK-18265)
Reported by: Fred Schroeder
Patches:
queue_leak.patch (license #5049) patch uploaded by mmichelson
Tested by: Thomas Arimont
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@333014 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r332875 | rmudgett | 2011-08-22 14:41:03 -0500 (Mon, 22 Aug 2011) | 1 line
Fix merge property.
................
r332878 | rmudgett | 2011-08-22 14:46:25 -0500 (Mon, 22 Aug 2011) | 25 lines
Merged revisions 332874 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r332874 | rmudgett | 2011-08-22 14:32:19 -0500 (Mon, 22 Aug 2011) | 18 lines
Reference leaks in app_queue.
* Fixed load_realtime_queue() leaking a queue reference when it overwrites
q when processing a realtime queue.
(issue ASTERISK-18265)
* Make join_queue() unreference the queue returned by
load_realtime_queue() when it is done with the pointer. The
load_realtime_queue() returns a reference to the just loaded realtime
queue.
* Fixed queues container reference leak in queues_data_provider_get().
* queue_unref() should not return q that was just unreferenced.
* Made logic in __queues_show() and queues_data_provider_get() when
calling load_realtime_queue() easier to understand.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@332881 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r331775 | mnicholson | 2011-08-12 14:03:31 -0500 (Fri, 12 Aug 2011) | 17 lines
Merged revisions 331774 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r331774 | mnicholson | 2011-08-12 14:01:27 -0500 (Fri, 12 Aug 2011) | 11 lines
Unlock the channel before calling update_queue.
Holding the channel lock when calling update_queue which attempts to lock the
queue lock can cause a deadlock. This deadlock involves the following chain:
1. hold chan lock -> wait queue lock
2. hold queue lock -> wait agent list lock
3. hold agent list lock -> wait chan list lock
4. hold chan list lock -> wait chan lock
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@331776 65c4cc65-6c06-0410-ace0-fbb531ad65f3
app_queue logs the events ADDMEMBER and REMOVEMEMBER with the agent field set
to the interface value rather than the membername value when a member is added
with a state_interface value set. However all other member related queue
events are logged with the membername when a state_interface is set. This
patch makes these fields optionally more consistent and correct.
(closes issue ASTERISK-14769)
Review: https://reviewboard.asterisk.org/r/1286
Patch-by: Jamuel Starkey
Tested-by: Kinsey Moore <kmoore@digium.com>
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@331037 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds the state_interface of the queue member struct to the output
of "queue show" (CLI command) and "QueueStatus" (AMI action) when displaying
relevant queue member information. For the AMI event message the variable
StateInterface has been added.
(closes issue ASTERISK-18071)
Review: https://reviewboard.asterisk.org/r/1300/
Patch-by: Jamuel Starkey
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@331000 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r326411 | tilghman | 2011-07-05 17:08:29 -0500 (Tue, 05 Jul 2011) | 14 lines
Add the attribute "type" to each "<use>" for menuselect.
This matters only when autoconf fails to detect that weak linking is supported.
External optional dependencies will become optional in both cases, as they are
removed at compile time when not detected. However, runtime-optional modules
are made mandatory when weak linking is not found. This change affects only
the external optional dependencies; previously, they were incorrectly required
when weak linking support was not detected.
Patches:
20110702__issue18062__asterisk_trunk.diff.txt by tilghman (License #5003)
Tested by: iasgoscouk
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@326412 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r325610 | rmudgett | 2011-06-29 13:05:15 -0500 (Wed, 29 Jun 2011) | 18 lines
Response to QueueRule manager command does not contain ActionID if it was specified.
* Add ActionID support as documented for the QueueRule AMI action.
* Remove documentation for ActionID with the Queues AMI action. The
output does not follow normal AMI response output and there is no place to
put an ActionID header.
(closes issue AST-602)
Reported by: Vlad Povorozniuc
Patches:
jira_ast_602_v1.8.patch (license #5621) patch uploaded by rmudgett
Tested by: Vlad Povorozniuc, rmudgett
Review: https://reviewboard.asterisk.org/r/1295/
JIRA SWP-3575
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@325611 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r322484 | rmudgett | 2011-06-08 15:46:55 -0500 (Wed, 08 Jun 2011) | 15 lines
Ring all queue with more than 255 agents will cause crash.
1. Create a ring-all queue with 500 permanent agents.
2. Call it.
3. Asterisk will crash.
The watchers array in app_queue.c has a hard limit of 255. Bounds
checking is not done on this array. No sane person should put 255 people
in a ring-all queue, but we should not crash anyway.
* Added bounds checking to the watchers array.
JIRA AST-464
JIRA SWP-2903
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@322485 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r320823 | rmudgett | 2011-05-25 12:06:38 -0500 (Wed, 25 May 2011) | 18 lines
The AMI Newstate event contains different information between v1.4 and v1.8.
The addition of connected line support in v1.8 changes the behavior of the
channel caller ID somewhat. The channel caller ID value no longer time
shares with the connected line ID on outgoing call legs. The timing of
some AMI events/responses output the connected line ID as caller ID.
These party ID's are now separate.
* The ConnectedLineNum and ConnectedLineName headers were added to many
AMI events/responses if the CallerIDNum/CallerIDName headers were also
present.
(closes issue #18252)
Reported by: gje
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/1227/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@320825 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r317584 | twilson | 2011-05-06 01:18:53 -0700 (Fri, 06 May 2011) | 20 lines
Merged revisions 317575 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r317575 | twilson | 2011-05-06 01:04:17 -0700 (Fri, 06 May 2011) | 13 lines
Merged revisions 317574 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r317574 | twilson | 2011-05-06 00:55:21 -0700 (Fri, 06 May 2011) | 6 lines
Re-fix queue round-robin
This part of the change for r315596 was incorrect. No bridge occurs
when doing a roundrobin dial and no one answers, so this code shouldn't
have been removed.
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@317596 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r315644 | twilson | 2011-04-26 14:39:01 -0700 (Tue, 26 Apr 2011) | 32 lines
Merged revisions 315643 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r315643 | twilson | 2011-04-26 14:27:44 -0700 (Tue, 26 Apr 2011) | 25 lines
Merged revisions 315596 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r315596 | twilson | 2011-04-26 14:16:10 -0700 (Tue, 26 Apr 2011) | 18 lines
Allow transfer loops without allowing forwarding loops
We try to avoid the situation where two phones may be forwarded to each other
causing an infinite loop by storing each dialed interface in a channel
datastore and checking the list before dialing out. This works, but currently
breaks situations like A calls B, A transfers B to C, B transfers C to A, and A
transfers C to B. Since human interaction is happening here and not an
automated forwarding loop, it should be allowed.
This patch removes the dialed_interfaces datastore when a call is bridged (a
suggestion from the brilliant mmichelson). If a call is being bridged, it
should be safe to assume that we aren't stuck in a loop.
Since we are now handling this is the bridge code, the previous attempts at
handling it in app_dial and app_queue are removed.
Review: https://reviewboard.asterisk.org/r/1195/
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@315670 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r308010 | qwell | 2011-02-15 17:34:03 -0600 (Tue, 15 Feb 2011) | 24 lines
Merged revisions 308007 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r308007 | qwell | 2011-02-15 17:33:24 -0600 (Tue, 15 Feb 2011) | 17 lines
Merged revisions 308002 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r308002 | qwell | 2011-02-15 17:32:20 -0600 (Tue, 15 Feb 2011) | 10 lines
Fix regression that changed behavior of queues when ringing a queue member.
This reverts r298596, which was to fix a highly bizarre and contrived issue
with a queue member that called into his own queue being transferred back
into his own queue. I couldn't reproduce that issue in any way. I think one
of the other recent transfer fixes actually fixed this.
(closes issue #18747)
Reported by: vrban
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@308013 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r307750 | tilghman | 2011-02-14 00:50:23 -0600 (Mon, 14 Feb 2011) | 23 lines
Calling a gosub routine defined in AEL from Dial/Queue ceased to work.
A bug in AEL did not distinguish between the "s" extension generated by
AEL and an "s" extension that was required to exist by the chan_dahdi
(or another channel) that was not supplied with a starting extension.
Therefore, AEL made incorrect assumptions about what commands were
permissable in the context. This was fixed by making AEL generate a
different extension name. However, Dial and Queue make additional
assumptions about the name of the default gosub extension. Therefore,
they needed to be brought into line with a "macro" rendered by AEL (as
a gosub), without breaking traditional dialplans written without the
aid of AEL.
Related to (issue #18480)
Reported by: nivek
(closes issue #18729)
Reported by: kkm
Patches:
20110209__issue18729.diff.txt uploaded by tilghman (license 14)
018729-dial-queue-gosub-try3.patch uploaded by kkm (license 888)
Tested by: kkm
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@307751 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r306324 | rmudgett | 2011-02-04 12:53:06 -0600 (Fri, 04 Feb 2011) | 9 lines
Don't send redirecting updates to the caller if the dialplan forked the call.
Each fork in the dial could be redirected and confuse the caller. For
ISDN the DivLeg1 and DivLeg3 messages would get confused because ISDN
redirects calls in sequence not in parallel.
* Also fixed a formatting inconsistency in app_dial.c and make a warning
message more useful about what frame type could not be written.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306325 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Add and extend the see-also sections to the documentation for applications
and functions in an effort to expand the online documentation of the wiki.
Also check for and update any links to moved documentation in the doc folder.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@304913 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r303009 | jpeeler | 2011-01-20 11:10:32 -0600 (Thu, 20 Jan 2011) | 21 lines
Merged revisions 303008 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r303008 | jpeeler | 2011-01-20 11:07:44 -0600 (Thu, 20 Jan 2011) | 14 lines
Merged revisions 303007 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r303007 | jpeeler | 2011-01-20 11:04:08 -0600 (Thu, 20 Jan 2011) | 8 lines
Add new queue strategy to preserve behavior for when queue members moved to ao2.
Add queue strategy called "rrordered" to mimic old behavior from when queue
members were stored in a linked list.
ABE-2707
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@303011 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r298598 | jpeeler | 2010-12-16 14:51:44 -0600 (Thu, 16 Dec 2010) | 21 lines
Merged revisions 298597 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r298597 | jpeeler | 2010-12-16 14:49:33 -0600 (Thu, 16 Dec 2010) | 14 lines
Merged revisions 298596 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r298596 | jpeeler | 2010-12-16 14:46:52 -0600 (Thu, 16 Dec 2010) | 7 lines
Fix improper hangup when doing an attended transfer to queue.
Had to indicate ringing in wait_for_answer so the attended transfer code would
not try and hang up the local channel it created, which would kill the call.
ABE-2624
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@298599 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r288079 | rmudgett | 2010-09-21 15:29:51 -0500 (Tue, 21 Sep 2010) | 2 lines
Protect channel access in CONNECTED_LINE and REDIRECTING interception macro launch code.
........
r288080 | rmudgett | 2010-09-21 15:29:59 -0500 (Tue, 21 Sep 2010) | 8 lines
Simplify locking code for REDIRECTING interception macro when forwarding a call.
Simplified the locking code by using a local copy of the redirecting party
information in app_dial.c:do_forward() and app_queue.c:wait_for_answer()
for launching the REDIRECTING interception macro when a call is forwarded.
Reduced the lock time of the 'o->chan' and 'in' channels.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@288081 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r279227 | rmudgett | 2010-07-23 17:20:47 -0500 (Fri, 23 Jul 2010) | 21 lines
Merged revisions 279207 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r279207 | rmudgett | 2010-07-23 17:11:23 -0500 (Fri, 23 Jul 2010) | 14 lines
Merged revisions 279206 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r279206 | rmudgett | 2010-07-23 16:56:44 -0500 (Fri, 23 Jul 2010) | 7 lines
SIP promiscuous redirect could fail to dial the redirect.
The ast_channel was created with one variable to ast_request() but the
call to ast_call() that initiates the outgoing call was using a different
variable. The two variables are not equivalent if the call_forward string
included a channel technology specifier. e.g., SIP/200
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@279245 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Just say the number of seconds (after minutes) rather than doing some incorrect
calculation with respect to minutes.
(closes issue #17498)
Reported by: corruptor
Patches:
holdesecs_bug.diff uploaded by corruptor (license 253)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@277488 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The purpose of this patch is to eliminate struct ast_callerid since it has
turned into a miscellaneous collection of various party information.
Eliminate struct ast_callerid and replace it with the following struct
organization:
struct ast_party_name {
char *str;
int char_set;
int presentation;
unsigned char valid;
};
struct ast_party_number {
char *str;
int plan;
int presentation;
unsigned char valid;
};
struct ast_party_subaddress {
char *str;
int type;
unsigned char odd_even_indicator;
unsigned char valid;
};
struct ast_party_id {
struct ast_party_name name;
struct ast_party_number number;
struct ast_party_subaddress subaddress;
char *tag;
};
struct ast_party_dialed {
struct {
char *str;
int plan;
} number;
struct ast_party_subaddress subaddress;
int transit_network_select;
};
struct ast_party_caller {
struct ast_party_id id;
char *ani;
int ani2;
};
The new organization adds some new information as well.
* The party name and number now have their own presentation value that can
be manipulated independently. ISDN supplies the presentation value for
the name and number at different times with the possibility that they
could be different.
* The party name and number now have a valid flag. Before this change the
name or number string could be empty if the presentation were restricted.
Most channel drivers assume that the name or number is then simply not
available instead of indicating that the name or number was restricted.
* The party name now has a character set value. SIP and Q.SIG have the
ability to indicate what character set a name string is using so it could
be presented properly.
* The dialed party now has a numbering plan value that could be useful to
have available.
The various channel drivers will need to be updated to support the new
core features as needed. They have simply been converted to supply
current functionality at this time.
The following items of note were either corrected or enhanced:
* The CONNECTEDLINE() and REDIRECTING() dialplan functions were
consolidated into func_callerid.c to share party id handling code.
* CALLERPRES() is now deprecated because the name and number have their
own presentation values.
* Fixed app_alarmreceiver.c write_metadata(). The workstring[] could
contain garbage. It also can only contain the caller id number so using
ast_callerid_parse() on it is silly. There was also a typo in the
CALLERNAME if test.
* Fixed app_rpt.c using ast_callerid_parse() on the channel's caller id
number string. ast_callerid_parse() alters the given buffer which in this
case is the channel's caller id number string. Then using
ast_shrink_phone_number() could alter it even more.
* Fixed caller ID name and number memory leak in chan_usbradio.c.
* Fixed uninitialized char arrays cid_num[] and cid_name[] in
sig_analog.c.
* Protected access to a caller channel with lock in chan_sip.c.
* Clarified intent of code in app_meetme.c sla_ring_station() and
dial_trunk(). Also made save all caller ID data instead of just the name
and number strings.
* Simplified cdr.c set_one_cid(). It hand coded the ast_callerid_merge()
function.
* Corrected some weirdness with app_privacy.c's use of caller
presentation.
Review: https://reviewboard.asterisk.org/r/702/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@276347 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
This version of the patch only adds AgentComplete for attended transfers. It was already present for blind transfers.
........
r272367 | mnicholson | 2010-06-23 17:33:51 -0500 (Wed, 23 Jun 2010) | 8 lines
Send AgentComplete manager events in the event of blind and attended transfers.
(closes issue #16819)
Reported by: elbriga
Patches:
app_queue.diff uploaded by elbriga (license 482)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@272368 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk Generic AOC Representation
- Generic AOC encode/decode routines.
(Generic AOC must be encoded to be passed on the wire in the AST_CONTROL_AOC frame)
- AST_CONTROL_AOC frame type to represent generic encoded AOC data
- Manager events for AOC-S, AOC-D, and AOC-E messages
Asterisk App Support
- app_dial AOC-S pass-through support on call setup
- app_queue AOC-S pass-through support on call setup
AOC Unit Tests
- AOC Unit Tests for encode/decode routines
- AOC Unit Test for manager event representation.
SIP AOC Support
- Pass-through of generic AOC-D and AOC-E messages to snom phones via the
snom AOC specification.
- Creation of chan_sip page3 flags for the addition of the new
'snom_aoc_enabled' sip.conf option.
IAX AOC Support
- Natively supports AOC pass-through through the use of the new
AST_CONTROL_AOC frame type
DAHDI AOC Support
- ETSI PRI full AOC Pass-through support
- 'aoc_enable' chan_dahdi.conf option for independently enabling
pass-through of AOC-S, AOC-D, AOC-E.
- 'aoce_delayhangup' option for retrieving AOC-E on disconnect.
- DAHDI A() dial string option for requesting AOC services.
example usage:
;requests AOC-S, AOC-D, and AOC-E on call setup
exten=>1111,1,Dial(DAHDI/g1/1112/A(s,d,e))
Review: https://reviewboard.asterisk.org/r/552/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@267096 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r265089 | mmichelson | 2010-05-21 15:59:14 -0500 (Fri, 21 May 2010) | 8 lines
Don't hang up on a queue caller if the file we attempt to play does not exist.
This also fixes a documentation mistake in file.h that made my original attempt
to correct this problem not work correctly.
(closes issue #17061)
Reported by: RoadKill
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@265090 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The connected line update macro would not get run if the connected line
number string was empty. The number could be empty if the connected line
update did not update a number but the name. It should be run if there
was an AST_CONTROL_CONNECTED_LINE frame received for pending dials and
queues.
Renamed and added some more comments for some confusing identifiers
directly connected to the related code.
Also fixed a memory leak in app_queue.
Review: https://reviewboard.asterisk.org/r/669/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@264669 65c4cc65-6c06-0410-ace0-fbb531ad65f3
From reviewboard:
Digium has a commercial customer who has made extensive use of the connected party and
redirecting information present in later versions of Asterisk Business Edition and which
is to be in the upcoming 1.8 release. Through their use of the feature, new problems and solutions
have come about. This patch adds several enhancements to maximize usage of the connected party
and redirecting information functionality.
First, Asterisk trunk already had connected line interception macros. These macros allow you to
manipulate connected line information before it was sent out to its target. This patch adds the
same feature except for redirecting information instead.
Second, the ast_callerid and ast_party_id structures have been enhanced to provide a "tag." This
tag can be set with func_callerid, func_connectedline, func_redirecting, and in the case of DAHDI,
mISDN, and SIP channels, can be set in a configuration file. The idea behind the callerid tag is
that it can be set to whatever value the administrator likes. Later, when running connected line
and redirecting macros, the admin can read the tag off the appropriate structure to determine what
action to take. You can think of this sort of like a channel variable, except that instead of having
the variable associated with a channel, the variable is associated with a specific identity within
Asterisk.
Third, app_dial has two new options, s and u. The s option lets a dialplan writer force a specific
caller ID tag to be placed on the outgoing channel. The u option allows the dialplan writer to force
a specific calling presentation value on the outgoing channel.
Fourth, there is a new control frame subclass called AST_CONTROL_READ_ACTION added. This was added
to correct a very specific situation. In the case of SIP semi-attended (blond) transfers, the party
being transferred would not have the opportunity to run a connected line interception macro to
possibly alter the transfer target's connected line information. The issue here was that during a
blond transfer, the SIP transfer code has no bridged channel on which to queue the connected line
update. The way this was corrected was to add this new control frame subclass. Now, we queue an
AST_CONTROL_READ_ACTION frame on the channel on which the connected line interception macro should
be run. When ast_read is called to read the frame, ast_read responds by calling a callback function
associated with the specific read action the control frame describes. In this case, the action taken
is to run the connected line interception macro on the transferee's channel.
Review: https://reviewboard.asterisk.org/r/652/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@263541 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a specific position is specified for the queue, the idea
was that the caller cannot be placed ahead of higher-priority
callers. Unfortunately, the logic was reversed so that the caller
could ONLY be placed ahead of higher priority callers.
Discovered while writing a unit test.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@260344 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This module implements an abstraction for retrieving and exporting
asterisk data.
Developed by:
Brett Bryant <brettbryant@gmail.com>
Eliel C. Sardanons (LU1ALY) <eliels@gmail.com>
For the Google Summer of code 2009 Project.
Documentation can be found in doxygen format and inside the
header include/asterisk/data.h
Review: https://reviewboard.asterisk.org/r/275/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@258517 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Richard Mudgett
Jonathan Rose
Matthew Jordan
Kinsey Moore
Olle Johansson
Terry Wilson
Sean Bright
Walter Doekes
Gregory Nietsky
Matthew Nicholson
Alec L Davis
Leif Madsen
Tilghman Lesher
Russell Bryant
Jason Parker
Andrew Latham
Jeff Peeler
Brett Bryant
Eliel C. Sardanons
Mark Michelson
Paul Belanger