1133 Commits (c1ab8ca74cec45730107cca3ed47fc61460365e4)

Author	SHA1	Message	Date
Joshua Colp	c1ab8ca74c	Merge "res_pjsip_session: Enable RFC3578 overlap dialing support."	8 years ago
Richard Begg	6b7697ed48	res_pjsip_session: Enable RFC3578 overlap dialing support. ... Support for RFC3578 overlap dialling (i.e. 484 Response to partially matched destinations) as currently provided by chan_sip is missing from res_pjsip. This patch adds a new endpoint attribute (allow_overlap) [defaults to yes] which when set to yes enables 484 responses to partial destination matches rather than the current 404. ASTERISK-26864 Change-Id: Iea444da3ee7c7d4f1fde1d01d138a3d7b0fe40f6	8 years ago
Richard Mudgett	8cb4f9cea1	CHANNEL(callid): Give dialplan access to the callid. ... * Added CHANNEL(callid) to retrieve the call identifier log tag associated with the channel. Dialplan now has access to the call log search key associated with the channel so it can be saved in case there is a problem with the call. ASTERISK-26878 Change-Id: I2c97ebd928b6f3c5bc80c5729e4d3c07f453049f	8 years ago
George Joseph	5013d8f5d3	res_pjsip: Symmetric transports ... A new transport parameter 'symmetric_transport' has been added. When a request from a dynamic contact comes in on a transport with this option set to 'yes', the transport name will be saved and used for subsequent outgoing requests like OPTIONS, NOTIFY and INVITE. It's saved as a contact uri parameter named 'x-ast-txp' and will display with the contact uri in CLI, AMI, and ARI output. On the outgoing request, if a transport wasn't explicitly set on the endpoint AND the request URI is not a hostname, the saved transport will be used and the 'x-ast-txp' parameter stripped from the outgoing packet. * config_transport was modified to accept and store the new parameter. * config_transport/transport_apply was updated to store the transport name in the pjsip_transport->info field using the pjsip_transport->pool on UDP transports. * A 'multihomed_on_rx_message' function was added to pjsip_message_ip_updater that, for incoming requests, retrieves the transport name from pjsip_transport->info and retrieves the transport. If transport->symmetric_transport is set, an 'x-ast-txp' uri parameter containing the transport name is added to the incoming Contact header. * An 'ast_sip_get_transport_name' function was added to res_pjsip. It takes an ast_sip_endpoint and a pjsip_sip_uri and returns a transport name if endpoint->transport is set or if there's an 'x-ast-txp' parameter on the uri and the uri host is an ipv4 or ipv6 address. Otherwise it returns NULL. * An 'ast_sip_dlg_set_transport' function was added to res_pjsip which takes an ast_sip_endpoint, a pjsip_dialog, and an optional pjsip_tpselector. It calls ast_sip_get_transport_name() and if a non-NULL is returned, sets the selector and sets the transport on the dialog. If a selector was passed in, it's updated. * res_pjsip/ast_sip_create_dialog_uac and ast_sip_create_dialog_uas were modified to call ast_sip_dlg_set_transport() instead of their original logic. * res_pjsip/create_out_of_dialog_request was modified to call ast_sip_get_transport_name() and pjsip_tx_data_set_transport() instead of its original logic. * Existing transport logic was removed from endpt_send_request since that can only be called after a create_out_of_dialog_request. * res_pjsip/ast_sip_create_rdata was converted to a wrapper around a new 'ast_sip_create_rdata_with_contact' function which allows a contact_uri to be specified in addition to the existing parameters. (See below) * res_pjsip_pubsub/internal_pjsip_evsub_send_request was eliminated since all it did was transport selection and that is now done in ast_sip_create_dialog_uac and ast_sip_create_dialog_uas. * 'contact_uri' was added to subscription_persistence. This was necessary because although the parsed rdata contact header has the x-ast-txp parameter added (if appropriate), subscription_persistence_update stores the raw packet which doesn't have it. subscription_persistence_recreate was then updated to call ast_sip_create_rdata_with_contact with the persisted contact_uri so the recreated subscription has the correct transport info to send the NOTIFYs. * res_pjsip_session/internal_pjsip_inv_send_msg was eliminated since all it did was transport selection and that is now done in ast_sip_create_dialog_uac. * pjsip_message_ip_updater/multihomed_on_tx_message was updated to remove all traces of the x-ast-txp parameter from the outgoing headers. NOTE: This change does NOT modify the behavior of permanent contacts specified on an aor. To do so would require that the permanent contact's contact uri be updated with the x-ast-txp parameter and the aor sorcery object updated. If we need to persue this, we need to think about cloning permanent contacts into the same store as the dynamic ones on an aor load so they can be updated without disturbing the originally configured value. You CAN add the x-ast-txp parameter to a permanent contact's uri but it would be much simpler to just set endpoint->transport. Change-Id: I4ee1f51473da32ca54b877cd158523efcef9655f	8 years ago
Mark Michelson	10fa49e327	Add rtcp-mux support ... This commit adds support for RFC 5761: Multiplexing RTP Data and Control Packets on a Single Port. Specifically, it enables the feature when using chan_pjsip. A new option, "rtcp_mux" has been added to endpoint configuration in pjsip.conf. If set, then Asterisk will attempt to use rtcp-mux with whatever it communicates with. Asterisk follows the rules set forth in RFC 5761 with regards to falling back to standard RTCP behavior if the far end does not indicate support for rtcp-mux. The lion's share of the changes in this commit are in res_rtp_asterisk.c. This is because it was pretty much hard wired to have an RTP and an RTCP transport. The strategy used here is that when rtcp-mux is enabled, the current RTCP transport and its trappings (such as DTLS SSL session) are freed, and the RTCP session instead just mooches off the RTP session. This leads to a lot of specialized if statements throughout. ASTERISK-26732 #close Reported by Dan Jenkins Change-Id: If46a93ba1282418d2803e3fd7869374da8b77ab5	8 years ago
Matt Jordan	1475604eff	res_pjsip_endpoint_identifier_ip: Add an option to match requests by header ... This patch adds a new features to the endpoint identifier module, 'match_header'. When set, inbound requests are matched by a provided SIP header: value pair. This option works in conjunction with the existing 'match' configuration option, such that if any 'match*' attribute matches an inbound request, the request is associated with the specified endpoint. Since this module now identifies by more than just IP address, appropriate renaming of the module and/or variables can be done in a non-release branch. ASTERISK-26863 #close Change-Id: Icfc14835c962f92e35e67bbdb235cf0589de5453 (cherry picked from commit 30f52d79d7)	8 years ago
Joshua Colp	6113bb470b	Merge "pbx_spool: Set AST_OUTGOING_ATTEMPT variable on channel"	8 years ago
Sean Bright	bc2c66b594	pbx_spool: Set AST_OUTGOING_ATTEMPT variable on channel ... Set a variable on the channel that indicates which attempt number we are currently performing to allow for attempt-specific behavior. ASTERISK-26568 #close Reported by: Roman Shubovich Change-Id: Iacd7e8d43b0ed5b6cb021c62f41f1a1f5733dd89	8 years ago
Daniel Journo	60998371e3	app_voicemail: Cannot set fromstring on a per-mailbox basis ... * apps/app_voicemail.c fromstring field added to mailbox which will override the global fromstring if set. ASTERISK-24562 #close Change-Id: I5e90e3a1ec2b2d5340b49a0db825e4bbb158b2fe	8 years ago
Jørgen H	7922f26cb0	res_pjsip WebRTC/websockets: Fix usage of WS vs WSS. ... According to the RFC[1] WSS should only be used in the Via header for secure Websockets. * Use WSS in Via for secure transport. * Only register one transport with the WS name because it would be ambiguous. Outgoing requests may try to find the transport by name and pjproject only finds the first one registered. This may mess up unsecure websockets but the impact should be minimal. Firefox and Chrome do not support anything other than secure websockets anymore. * Added and updated some debug messages concerning websockets. * security_events.c: Relax case restriction when determining security transport type. * The res_pjsip_nat module has been updated to not touch the transport on Websocket originating messages. [1] https://tools.ietf.org/html/rfc7118 ASTERISK-26796 #close Change-Id: Ie3a0fb1a41101a4c1e49d875a8aa87b189e7ab12	8 years ago
George Joseph	22242fef5d	res_pjsip_outbound_registration: Subscribe to network change events ... Outbound registration now subscribes to network change events published by res_stun_monitor and refreshes all registrations when an event happens. The 'pjsip send (un)register' CLI commands were updated to accept '*all' as an argument to operate on all registrations. The 'PJSIP(Un)Register' AMI commands were also updated to accept '*all'. ASTERISK-26808 #close Change-Id: Iad58a9e0aa5d340477fca200bf293187a6ca5a25	8 years ago
Sean Bright	275f469a4d	app_voicemail: Allow 'Comedian Mail' branding to be overriden ... Original patch by John Covert, slight modifications by me. ASTERISK-17428 #close Reported by: John Covert Patches: app_voicemail.c.patch (license #5512) patch uploaded by John Covert Change-Id: Ic3361b0782e5a5397a19ab18eb8550923a9bd6a6	8 years ago
Sean Bright	662c9e69fa	app_record: Add option to prevent silence from being truncated ... When using Record() with the silence detection feature, the stream is written out to the given file. However, if only 'silence' is detected, this file is then truncated to the first second of the recording. This patch adds the 'u' option to Record() to override that behavior. ASTERISK-18286 #close Reported by: var Patches: app_record-1.8.7.1.diff (license #6184) patch uploaded by var Change-Id: Ia1cd163483235efe2db05e52f39054288553b957	8 years ago
George Joseph	6691606723	ari: Implement 'debug all' and request/response logging ... The 'ari set debug' command has been enhanced to accept 'all' as an application name. This allows dumping of all apps even if an app hasn't registered yet. To accomplish this, a new global_debug global variable was added to res/stasis/app.c and new APIs were added to set and query the value. 'ari set debug' now displays requests and responses as well as events. This required refactoring the existing debug code. * The implementation for 'ari set debug' was moved from stasis/cli.{c,h} to ari/cli.{c,h}, and stasis/cli.{c,h} were deleted. * In order to print the body of incoming requests even if a request failed, the consumption of the body was moved from the ari stubs to ast_ari_callback in res_ari.c and the moustache templates were then regenerated. The body is now passed to ast_ari_invoke and then on to the handlers. This results in code savings since that template was inserted multiple times into all the stubs. An additional change was made to the ao2_str_container implementation to add partial key searching and a sort function. The existing cli code assumed it was already there when it wasn't so the tab completion was never working. Change-Id: Ief936f747ce47f1fb14035fbe61152cf766406bf (cherry picked from commit 1d890874f3)	8 years ago
Sebastian Gutierrez	8cc1cd5df7	app_queue: Add QueueUpdate application. ... Add an application that allows tracking outbound calls using app_queue. ASTERISK-19862 Change-Id: Ia0ab64aed934c25b2a25022adcc7c0624224346e	8 years ago
Joshua Colp	a7d856cd96	res_pjsip_endpoint_identifier_ip: Add support for SRV lookups. ... This change implements SRV support for the IP based endpoint identifier module. All possible addresses through SRV are looked up and added as matches. If no SRV records are available a fallback to normal host resolution is done. If an IP address is provided then no SRV lookup occurs. This is configured using the "srv_lookups" option on the identify section and defaults to "yes". ASTERISK-26693 Change-Id: I6b641e275bf96629320efa8b479737062aed82ac	8 years ago
Jonathan R. Rose	d96e350256	core/pbx: dialplan show - display filename/line# ... Adds the ability for extensions to be registered to include filename and line number so that dialplan show output can show the filename and line number of a config file responsible for generating a given extension. This only affects config modules that are written to use the new extension registering functions. In this patch, that only includes pbx_config, so extensions registered in extensions.conf and any included extension will be shown in this manner. Extensions registered in this manner will show the filename and line number *instead* of the registrar. ASTERISK-26658 #close Reported by: Jonathan R. Rose Change-Id: Ieccc6abccdff34ed5c7da3511fd24972b8f2dd30	8 years ago
George Joseph	79b09b5f18	res_pjsip_registrar: AMI Add RegistrationInboundContactStatuses command ... The PJSIPShowRegistrationsInbound AMI command was just dumping out all AORs which was pretty useless and resource heavy since it had to get all endpoints, then all aors for each endpoint, then all contacts for each aor. PJSIPShowRegistrationInboundContactStatuses sends ContactStatusDetail events which meets the intended purpose of the other command and has significantly less overhead. Also, some additional fields that were added to Contact since the original creation of the ContactStatusDetail event have been added to the end of the event. For compatibility purposes, PJSIPShowRegistrationsInbound is left intact. ASTERISK-26644 #close Change-Id: I326f12c9ecb52bf37ba03f0748749de4da01490a	9 years ago
Joshua Colp	faf2194fab	Merge "app_originate: Add option to execute gosub prior to dial"	9 years ago
Richard Mudgett	4b3d3fc741	res_pjsip_outbound_registration.c: Filter redundant statsd reporting. ... Increasing the testsuite shutdown timeout before forcibly killing Asterisk allowed more events to be sent out. Some tests failed as a result. The tests/channels/pjsip/statsd/registrations failed because we now get the statsd events that a comment in the test configuration stated couldn't be intercepted. Unfortunately, we get a variable number of events because of internal status state transition races generating redundant statsd events. We were reporting redundant statsd PJSIP.registrations.state changes for internal state changes that equated to the same thing publicly. * Made update_client_state_status() filter out redundant statsd updates. ASTERISK-26527 Change-Id: If851c7d514bb530d9226e4941ba97dcf52000646	9 years ago
Richard Mudgett	1dfa11b65c	PJPROJECT logging: Made easier to get available logging levels. ... Use of the new logging is as simple as issuing the new CLI command or setting the new pjproject.conf option. Other options that can affect the logging are how you have the pjproject log levels mapped to Asterisk log types in pjproject.conf and if you have configured Asterisk to log the DEBUG type messages. Altering the pjproject.conf level mapping shouldn't be necessary for most installations as the default mapping is sensible. Configuring Asterisk to log the DEBUG message type is standard practice for collecting debug information. * Added CLI "pjproject set log level" command to dynamically adjust the maximum pjproject log message level. * Added CLI "pjproject show log level" command to see the currently set maximum pjproject log message level. * Added pjproject.conf startup section "log_level" option to set the initial maximum pjproject log message level so all messages could be captured from initialization. * Set PJ_LOG_MAX_LEVEL to 6 to compile in all defined logging levels into bundled pjproject. Pjproject will use the currently set run time log level to determine if a log message is generated just like Asterisk verbose and debug logging levels. * In log_forwarder(), made always log enabled and mapped pjproject log messages. DEBUG mapped log messages are no longer gated by the current Asterisk debug logging level. * Removed RAII_VAR() from res_pjproject.c:get_log_level(). ASTERISK-26630 #close Change-Id: I6dca12979f482ffb0450aaf58db0fe0f6d2e5389	9 years ago
David Kerr	ddc951060a	app_originate: Add option to execute gosub prior to dial ... Issue/patch ASTERISK-26587 was inspired by issue ASTERISK-22992 that requested ability to add callerid into app_originate. Comments in that issue suggested that it was better solved by adding an option to gosub prior to originating the call. The attached patch implements this much like app_dial with two options one to gosub on the originating channel and one to gosub on the newly created channel and behaves just like app_dial. I have tested this patch by adding callerid info to the new channel and also SIPAddHeader (to e.g. add header to force auto answer) and confirmed it works. Have also tested both 'exten' and 'app' versions of app_originate. Opened by: dkerr Patch by: dkerr Change-Id: I36abc39b58567ffcab4a636ea196ef48be234c57	9 years ago
zuul	120a4999f0	Merge "Add support for building RADIUS with radcli"	9 years ago
Mark Michelson	7a8d6bc81b	Bump ARI version to 2.0.0 ... In order to not have version number overlap between different versions of Asterisk, each new major version of Asterisk will mean we also bump the ARI major version number. This particular change does NOT introduce any known breaking changes to ARI. For discussion relating to this topice, see: http://lists.digium.com/pipermail/asterisk-dev/2016-November/075964.html Change-Id: I712ee0df177a8fe1252da2bc029705268b97b665	9 years ago
zuul	d0474f6322	Merge "res/ari/resource_bridges: Add the ability to manipulate the video source"	9 years ago
Matt Jordan	a72ef38113	res/ari/resource_bridges: Add the ability to manipulate the video source ... In multi-party bridges, Asterisk currently supports two video modes: * Follow the talker, in which the speaker with the most energy is shown to all participants but the speaker, and the speaker sees the previous video source * Explicitly set video sources, in which all participants see a locked video source Prior to this patch, ARI had no ability to manipulate the video source. This isn't important for two-party bridges, in which Asterisk merely relays the video between the participants. However, in a multi-party bridge, it can be advantageous to allow an external application to manipulate the video source. This patch provides two new routes to accomplish this: (1) setVideoSource: POST /bridges/{bridgeId}/videoSource/{channelId} Sets a video source to an explicit channel (2) clearVideoSource: DELETE /bridges/{bridgeId}/videoSource Removes any explicit video source, and sets the video mode to talk detection ASTERISK-26595 #close Change-Id: I98e455d5bffc08ea5e8d6b84ccaf063c714e6621	9 years ago
Sebastien Duthil	c6d755de11	res_ari: Add support for channel variables in ARI events. ... This works the same as for AMI manager variables. Set "channelvars=foo,bar" in your ari.conf general section, and then the channel variables "foo" and "bar" (along with their values), will appear in every Stasis websocket channel event. ASTERISK-26492 #close patches: ari_vars.diff submitted by Mark Michelson Change-Id: I5609ba239259577c0948645df776d7f3bc864229	9 years ago
Tzafrir Cohen	97a75e3829	Add support for building RADIUS with radcli ... Radcli is yet another RADIUS client library, generally compatible with freeradius and radiusclient-ng. This commit adds autoconf option for detecting it as well and changes cdr_radius and cel_radius to use its header file in that case. ASTERISK-26540 #close Change-Id: I271f0715406334874865ffbce0b354b3a2ca148f	9 years ago
Joshua Colp	93a0de1f0e	app_queue: Add mention of 'ABANDON' variable to CHANGES. ... ASTERISK-26558 Change-Id: I1127010181e79c8ac291f72f036cb8e430dc7f7e	9 years ago
Alexander Traud	9ac53877f6	rtp_engine: Allow more than 32 dynamic payload types. ... Since adding all remaining rates of Signed Linear (ASTERISK-24274), SILK (Gerrit 3136) and Codec 2 (ASTERISK-26217), no RTP Payload Type is left in the dynamic range (96-127). RFC 3551 section 3 allows to reassign other ranges. Consequently, when the dynamic range is exhausted, this change utilizes payload types in the range between 35 and 63 giving room for another 29 payload types. ASTERISK-26311 #close Change-Id: I7bc96ab764bc30098a178b841cbf7146f9d64964	9 years ago
Matt Jordan	c30d677333	res/stasis: Add CLI commands for displaying/debugging ARI apps ... This patch adds three new CLI commands: - ari show apps: list the registered ARI applications - ari show app: show detailed information about an ARI application - ari set debug: dump events being sent to an ARI application Note that while these CLI commands live in the res_stasis module, we use the 'ari' family for these commands. This was done as most users of Asterisk aren't aware of the semantic differences between ARI and res_stasis, and some 'ari' CLI commands already exist. ASTERISK-26488 #close Change-Id: I51ad6ff0cabee0d69db06858c13f18b1c513c9f5	9 years ago
zuul	0ec5abe592	Merge "Remove ASTERISK_REGISTER_FILE."	9 years ago
Joshua Colp	24d0907849	Merge "pjsip: Fix a few media bugs with reinvites and asymmetric payloads."	9 years ago
Corey Farrell	a6e5bae3ef	Remove ASTERISK_REGISTER_FILE. ... ASTERISK_REGISTER_FILE no longer has any purpose so this commit removes all traces of it. Previously exported symbols removed: * __ast_register_file * __ast_unregister_file * ast_complete_source_filename This also removes the mtx_prof static variable that was declared when MTX_PROFILE was enabled. This variable was only used in lock.c so it is now initialized in that file only. ASTERISK-26480 #close Change-Id: I1074af07d71f9e159c48ef36631aa432c86f9966	9 years ago
Joshua Colp	aed6c219a3	pjsip: Fix a few media bugs with reinvites and asymmetric payloads. ... When channel format changes occurred as a result of an RTP re-negotiation the bridge was not informed this had happened. As a result the bridge technology was not re-evaluated and the channel may have been in a bridge technology that was incompatible with its formats. The bridge is now unbridged and the technology re-evaluated when this occurs. The chan_pjsip module also allowed asymmetric codecs for sending and receiving. This did not work with all devices and caused one way audio problems. The default has been changed to NOT do this but to match the sending codec to the receiving codec. For users who want asymmetric codecs an option has been added, asymmetric_rtp_codec, which will return chan_pjsip to the previous behavior. The codecs returned by the chan_pjsip module when queried by the bridge_native_rtp module were also not reflective of the actual negotiated codecs. The nativeformats are now returned as they reflect the actual negotiated codecs. ASTERISK-26423 #close Change-Id: I6ec88c6e3912f52c334f1a26983ccb8f267020dc	9 years ago
Badalyan Vyacheslav	01d1d3763f	cdr_radius,cel_radius: Fix old memleak in unload ... - Call "rc_openlog" optional. If you do not call, you will simply NULL instead of a name. - On the one PID can be only one syslog channel. And it can already be run in logger.c - Calling rc_openlog we assigns a new name for the channel syslog. This unexpected behavior for logger.c. Most lesser evil, is to agree on a NULL name syslog if the channel was not launched in logger.c. It also solves the problem of memory leaks. ASTERISK-26455 #close Change-Id: Ic17c38de67583e971d78fe18807d1a9faf8f0afd	9 years ago
Joshua Colp	403c4f5833	pjsip: Support dual stack automatically. ... This change adds support for dual stack automatically. No configuration is required and the IP address and version in the SIP messages and SDP will be automatically changed based on the transport over which the message is being sent. RTP usage has also been changed to listen on both IPv4 and IPv6 simultaneously to allow media to flow, and to allow ICE support on both simultaneously. This also allows failover between IPv6 and IPv4 to work as expected. ASTERISK-26309 #close Change-Id: I235a421d8f9a326606d861b449fa6fe3a030572d	9 years ago
Michael Walton	3e96d491d0	res_rtp_asterisk: Add ice_blacklist option ... Introduces ice_blacklist configuration in rtp.conf. Subnets listed in the form ice_blacklist = <subnet spec>, e.g. ice_blacklist = 192.168.1.0/255.255.255.0, are excluded from ICE host, srflx and relay discovery. This is useful for optimizing the ICE process where a system has multiple host address ranges and/or physical interfaces and certain of them are not expected to be used for RTP. Multiple ice_blacklist configuration lines may be used. If left unconfigured, all discovered host addresses are used, as per previous behavior. Documention in rtp.conf.sample. ASTERISK-26418 #close Change-Id: Ibee88f80d7693874fda1cceaef94a03bd86012c9	9 years ago
Matt Jordan	dd5129d84a	res/ari: Add the Asterisk EID field to outgoing events ... This patch adds the Asterisk EID field to all outgoing ARI events. Because this field should be added to all events as they are transmitted, it is appended to the JSON message just prior to it being handed off to the application message handler. This makes it somewhat resilient to both new events being added to ARI, as well as other potential event transport mechanisms. ASTERISK-26470 #close Change-Id: Ieff0ecc24464e83f3f44e9c3e7bd9a5d70b87a1d	9 years ago
George Joseph	86e8716952	app_dial: Add the "Q" option to set the cause on unanswered channels ... The "Q" option will set the cause on the unanswered channels when another channel answers. It overrides the default of ANSWERED_ELSEWHERE. NOTE: chan_sip does not support setting the cause on a CANCEL to anything other than ANSWERED_ELSEWHERE. ASTERISK-26446 #close Change-Id: I71742e0919aaa16784c30a2b2e73fbeed7672e47	9 years ago
Corey Farrell	8c5c95ad89	core: Remove ABI effects of LOW_MEMORY. ... This allows asterisk to compiled with LOW_MEMORY to load modules built without LOW_MEMORY. ASTERISK-26398 #close Change-Id: I24b78ac9493ab933b11087a8b6794f3c96d4872d	9 years ago
Tzafrir Cohen	07b95f7c65	sd_notify (systemd status notifications) support ... sd_notify() is used to notify systemd of changes to the status of the process. This allows the systemd daemon to know when the process finished loading (and thus only start another program after Asterisk has finished loading). To use this, use a systemd unit with 'Type=notify' for Asterisk. This commit also adds the function ast_sd_notify(), a wrapper around sd_notify that does nothing if not built with systemd support. Also adds support for libsystemd detection in the configure script. Change-Id: Ied6a59dafd5ef331c5c7ae8f3ccd2dfc94be7811	9 years ago
Richard Mudgett	ba362822f3	res_pjsip: Add ignore_uri_user_options option. ... This implements the chan_sip legacy_useroption_parsing option but with a better name. * Made the caller-id number and redirecting number strings obtained from incoming SIP URI user fields always truncated at the first semicolon. People don't care about anything after the semicolon showing up on their displays even though the RFC allows the semicolon. ASTERISK-26316 #close Reported by: Kevin Harwell Change-Id: Ib42b0e940dd34d84c7b14bc2e90d1ba392624f62	9 years ago
zuul	9d54dd04bb	Merge "res/res_pjsip: Add preferred_codec_only config to pjsip endpoint."	9 years ago
Aaron An	2a50c29101	res/res_pjsip: Add preferred_codec_only config to pjsip endpoint. ... This patch add config to pjsip by endpoint. ;preferred_codec_only=yes ; Respond to a SIP invite with the single most preferred codec ; rather than advertising all joint codec capabilities. This ; limits the other side's codec choice to exactly what we prefer. ASTERISK-26317 #close Reported by: AaronAn Tested by: AaronAn Change-Id: Iad04dc55055403bbf5ec050997aee2dadc4f0762	9 years ago
Mark Michelson	ac02bbd9a0	ConfBridge: Make some announcements asynchronous. ... Confbridge announcements tend to block a channel while they are being played. In some circumstances, this is warranted since you want that particular channel not to hear the announcement (Example: "John Doe has entered the conference"). For others it makes less sense. This change first introduces methods for playing sounds asynchronously into the conference. This is very similar to how synchronous sounds are played, except the channel initiating the playback does not wait for the sound to complete before moving on. Asynchronous announcements are used for two circumstances: * Sounds played for a user after they have left the bridge * Sounds that play first to a single user and then the rest of the conference (if the channel and conference use the same language) ASTERISK-26289 #close Reported by Mark Michelson Change-Id: Ie486bb3de1646d50894489030326a423e594ab0a	9 years ago
zuul	edaba05fea	Merge "build: Add download capability for external packages"	9 years ago
Alexander Traud	7a12355dbd	chan_sip: Allow Preferred sRTP. ... Following the Encrypt-all-the-things paradigm: The user enters his SIP-URI and password. Thanks to DNS-NAPTR, the phone determines SIP-over-TLS as preferred transport. In SIP/SDP, the phone starts the call with a crypto attribute, but not as RTP/sAVP but the RTP/AVP profile (sRTP is preferred aka optional; not mandatory). If the VoIP server does not support sRTP and TLS, the phone shows an open padlock icon. This paradigm is supported by several VoIP/SIP clients on default. Some implementations even cannot be changed to RTP/sAVP. Therefore here, this change allows Preferred sRTP for ingress. For egress, please, create a dial plan which starts with RTP/SAVP, and when rejected tries again with RTP/AVP. ASTERISK-20234 #close Reported by: tootai Tested by: tootai, Alexander Traud patches: srtp_patches.diff submitted by Matt Jordan Change-Id: I42cb779df3a9c7b3dd03a629fb3a296aa4ceb0fd	9 years ago
George Joseph	6caf6bcdad	build: Add download capability for external packages ... The DPMA and g729a, silk, siren7 and siren14 codecs hosted at http://downloads.digium.com/pub/telephony/ are now listed in the "External" sections of the "Resource Modules" and "Codec Translators" pages in menuselect. Any that are selected will automatically be downloaded and installed when "make install" is run. Their LICENSE and README (if avaialble) files will be installed to ASTVARLIBDIR/documentation/thirdparty/<product_name>. Example use with codecs: The codecs/codecs.xml file is a menuselect style xml file that lists the codecs to be included. Their support levels are 'external', which triggers the download and install, and defaultenabled is no. Also because codec_g729a is actually in a directory named codec_g729 on the download server, the newly added 'member_data' element is used to override the default of the directory name being the package name. You can use the 'directory_name' attribute to keep default base URL (http://downloads.digium.com/pub/telephony/) but use the new directory, or you use the 'remote_url' attribute to specify a full URL to the download directory. In this case, you must still follow the same subdirectory naming conventions as that used for the packages located at 'http://downloads.digium.com/pub/telephony'. A new configure option '--with-externals-cache' was added and like '--with-sounds-cache' it allows the installer to cache tarballs so they're not downloaded every time. To assist with the download and install process, each external package now has a manifest.xml file that, among other things, contains a package version and checksums for each file in the tarball. The manifest is saved to both the cache directory and ASTMODDIR and together with the manifest.xml on the downloads site, tells the install scripts whether a download and/or update is needed. bash and xmlstarlet are required for downloader operation. If they're not installed, the external items in menuselect will be unavailable. Change-Id: Id3dcf1289ffd3cb0bbd7dfab3cafbb87be60323a	9 years ago
Richard Mudgett	ea929d766d	res_pjsip: Cache global config options. ... We may check a global config option hundreds of times a second or more. Asking sorcery for the global configuration from the config files backend involves several allocations and container traversals. Using realtime without a memory cache is a lot worse because you have to lookup in the realtime database each time to reconstitute the sorcery object. With a memory cache for realtime, there is about the same amount of overhead as for config files. Either way, it is still fairly expensive to access the sorcery object that much. * Cache the global config options so we can access them faster. You must now always perform a res_pjsip reload to change the global options. Change-Id: Ice16c7a4cbca4614da344aaea21a072b86263ef7	9 years ago