asterisk

Commit Graph

Author	SHA1	Message	Date
Matthew Jordan	844bc76bef	clang compiler warnings: Fix -Winitializer-overrides This patch fixes clange compiler warnings for initializer overrides. Specifically: res_pjsip/config_transport maps PJSIP_TLSV1_METHOD to the same enumeration value as PJSIP_SSL_DEFAULT_METHOD. When initializing an array containing those enum values, we therefore initialize the value twice to two different values, "tlsv1" and "default". This patch changes it to just initialize the index in the array to "tlsv1". Review: https://reviewboard.asterisk.org/r/4539/ ASTERISK-24917 Reported by: dkdegroot patches: rb4539.patch submitted by dkdegroot (License 6600) git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@433682 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Kevin Harwell	9e3d316dd1	res_pjsip: make it unloadable (take 2) Due to the original patch causing memory corruptions it was removed until the problem could be resolved. This patch is the original patch plus some added locking around stasis router subcription that was needed to avoid the memory corruption. Description of the original problem and patch (still applicable): The res_pjsip module was previously unloadable. With this patch it can now be unloaded. This patch is based off the original patch on the issue (listed below) by Corey Farrell with a few modifications. Namely, removed a few changes not required to make the module unloadable and also fixed a bug that would cause asterisk to crash on unloading. This patch is the first step (should hopefully be followed by another/others at some point) in allowing res_pjsip and the modules that depend on it to be unloadable. At this time, res_pjsip and some of the modules that depend on res_pjsip cannot be unloaded without causing problems of some sort. The goal of this patch is to get res_pjsip and only res_pjsip to be able to unload successfully and/or shutdown without incident (crashes, leaks, etc...). Other dependent modules may still cause problems on unload. Basically made sure, with the patch applied, that res_pjsip (with no other dependent modules loaded) could be succesfully unloaded and Asterisk could shutdown without any leaks or crashes that pertained directly to res_pjsip. ASTERISK-24485 #close Reported by: Corey Farrell Review: https://reviewboard.asterisk.org/r/4363/ patches: pjsip_unload-broken-r1.patch submitted by Corey Farrell (license 5909) git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431179 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Kevin Harwell	34c220203f	REVERTING res_pjsip: make it unloadable Due to the original patch causing memory corruptions the patch is being removed until the problem can be resolved. git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430734 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Mark Michelson	8bc4a89e1f	Add support for the ca_list_path option for PJSIP transports. This allows for a path to be specified that has a collection of CA certificates in it. ASTERISK-24575 #close Reported by cloos Patches: pj-ca-path-trunk.diff uploaded by cloos (License #5956) Review: https://reviewboard.asterisk.org/r/4344 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430709 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Kevin Harwell	77a036bf3f	res_pjsip: make it unloadable The res_pjsip module was previously unloadable. With this patch it can now be unloaded. This patch is based off the original patch on the issue (listed below) by Corey Farrell with a few modifications. Namely, removed a few changes not required to make the module unloadable and also fixed a bug that would cause asterisk to crash on unloading. This patch is the first step (should hopefully be followed by another/others at some point) in allowing res_pjsip and the modules that depend on it to be unloadable. At this time, res_pjsip and some of the modules that depend on res_pjsip cannot be unloaded without causing problems of some sort. The goal of this patch is to get res_pjsip and only res_pjsip to be able to unload successfully and/or shutdown without incident (crashes, leaks, etc...). Other dependent modules may still cause problems on unload. Basically made sure, with the patch applied, that res_pjsip (with no other dependent modules loaded) could be succesfully unloaded and Asterisk could shutdown without any leaks or crashes that pertained directly to res_pjsip. ASTERISK-24485 #close Reported by: Corey Farrell Review: https://reviewboard.asterisk.org/r/4311/ patches: pjsip_unload-broken-r1.patch submitted by Corey Farrell (license 5909) git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430628 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	94105b30a6	res_pjsip: Make transport cipher option accept a comma separated list of cipher names. Improvements to the res_pjsip transport cipher option. * Made the cipher option accept a comma separated list of OpenSSL cipher names. Users of realtime will be glad if they have more than one name to list. * Added the CLI command 'pjsip list ciphers' so a user can know what OpenSSL names are available for the cipher option. * Updated the cipher option online XML documentation to specify what is expected for the value. * Updated pjsip.conf.sample to not indicate that ALL is acceptable since ALL does not imply a preference order for the ciphers and PJSIP does not simply pass the string to OpenSSL for interpretation. ASTERISK-24199 #close Reported by: Joshua Colp Review: https://reviewboard.asterisk.org/r/4018/ ........ Merged revisions 424393 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@424394 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Kinsey Moore	e3da76a352	PJSIP: Handle defaults properly This updates the code behind PJSIP configuration options with custom handlers to deal with the assigned default values properly where it makes sense and adjusting the default value where it doesn't. Before applying this patch, there were several cases where the default value for an option would prevent that config section from loading properly. Reported by: Thomas Thompson Review: https://reviewboard.asterisk.org/r/4019/ ........ Merged revisions 424263 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@424266 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
George Joseph	a2482acdce	res_pjsip: ami: Fix error in AMI output when an endpoint has no transport When no transport is associated to an endpoint, the AMI output for PJSIPShowEndpoint indicates an error instead of silently ignoring the missing transport. This patch causes the error to appear only if a transport was specified on the endpoint and the transport doesn't exist. It also fixes an issue with counting the objects that were actually found. ASTERISK-24161 #close ASTERISK-24331 #close Tested by: George Joseph Review: https://reviewboard.asterisk.org/r/3998/ ........ Merged revisions 423282 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@423284 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	365ae7523b	res_http_websocket: Close websocket correctly and use careful fwrite When a client takes a long time to process information received from Asterisk, a write operation using fwrite may fail to write all information. This causes the underlying file stream to be in an unknown state, such that the socket must be disconnected. Unfortunately, there are two problems with this in Asterisk's existing websocket code: 1. Periodically, during the read loop, Asterisk must write to the connected websocket to respond to pings. As such, Asterisk maintains a reference to the session during the loop. When ast_http_websocket_write fails, it may cause the session to decrement its ref count, but this in and of itself does not break the read loop. The read loop's write, on the other hand, does not break the loop if it fails. This causes the socket to get in a 'stuck' state, preventing the client from reconnecting to the server. 2. More importantly, however, is that the fwrite in ast_http_websocket_write fails with a large volume of data when the client takes awhile to process the information. When it does fail, it fails writing only a portion of the bytes. With some debugging, it was shown that this was failing in a similar fashion to ASTERISK-12767. Switching this over to ast_careful_fwrite with a long enough timeout solved the problem. Note that this version of the patch, unlike r417310 in Asterisk 11, exposes configuration options beyond just chan_sip's sip.conf. Configuration options to configure the write timeout have also been added to pjsip.conf and ari.conf. #ASTERISK-23917 #close Reported by: Matt Jordan Review: https://reviewboard.asterisk.org/r/3624/ ........ Merged revisions 417310 from http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged revisions 417311 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417317 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Kinsey Moore	abd3e4040b	Allow Asterisk to compile under GCC 4.10 This resolves a large number of compiler warnings from GCC 4.10 which cause the build to fail under dev mode. The vast majority are signed/unsigned mismatches in printf-style format strings. ........ Merged revisions 413586 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 413587 from http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged revisions 413588 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@413589 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Joshua Colp	45a7132480	res_pjsip: Add the ability to configure ciphers based on name. Previously this code would only accept the OpenSSL identifier instead of the documented name. ASTERISK-23498 #close ASTERISK-23498 #comment Reported by: Anthony Messina Review: https://reviewboard.asterisk.org/r/3491/ ........ Merged revisions 413159 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@413160 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Jonathan Rose	ff63012c4e	PJSIP: TOS values should be represented as decimals in sorcery objects (closes issue ASTERISK-23235) Reported by: George Joseph Review: https://reviewboard.asterisk.org/r/3324/ ........ Merged revisions 410574 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410575 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
George Joseph	3ff60b75b1	pjsip_cli: Create pjsip show channel and contact, and general cli code cleanup. Created the 'pjsip show channel' and 'pjsip show contact' commands. Refactored out the hated ast_hashtab. Replaced with ao2_container. Cleaned up function naming. Internal only, no public name changes. Cleaned up whitespace and brace formatting in cli code. Changed some NULL checking from "if"s to ast_asserts. Fixed some register/unregister ordering to reduce deadlock potential. Fixed ast_sip_location_add_contact where the 'name' buffer was too short. Fixed some self-assignment issues in res_pjsip_outbound_registration. (closes issue ASTERISK-23276) Review: http://reviewboard.asterisk.org/r/3283/ ........ Merged revisions 410287 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410288 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
George Joseph	a4906e9f86	sorcery: Create AST_SORCERY dialplan function. This patch creates the AST_SORCERY dialplan function which allows someone to retrieve any value from a sorcery-based config file. It's similar to AST_CONFIG. The creation of the function itself was fairly straightforward but it required changes to the underlying sorcery infrastructure that rippled into individual sorcery objects. The changes stemmed from inconsistencies in how sorcery created ast_variable objectsets from sorcery objects and the inconsistency in how individual objects used that feature especially when it came to parameters that can be specified multiple times like contact in aor and match in identify. You can read more here... http://lists.digium.com/pipermail/asterisk-dev/2014-February/065202.html So, what this patch does, besides actually creating the AST_SORCERY function, is the following... * Creates ast_variable_list_append which is a helper to append one ast_variable list to another. * Modifies the ast_sorcery_object_field_register functions to accept the already-defined sorcery_fields_handler callback. * Modifies ast_sorcery_objectset_create to accept a parameter indicating return type preference...a single ast_variable with all values concatenated or an ast_variable list with multiple entries. Also fixed a few bugs. * Modifies individual sorcery object implementations to use the new function definition of the ast_sorcery_object_field_register functions. * Modifies location.c and res_pjsip_endpoint_identifier_ip.c to implement sorcery_fields_handler handlers so they return multiple occurrences as an ast_variable_list. * Added a whole bunch of tests to test_sorcery. (closes issue ASTERISK-22537) Review: http://reviewboard.asterisk.org/r/3254/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410042 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Jonathan Rose	f0b8590c14	pjsip configuration: Make transport TOS values consistent with endpoints Transport TOS values were interpreted as DSCP values without being documented as such. Endpoint TOS values (tos_audio/tos_video) behaved normally as TOS values have historically. This patch makes the transport TOS values behave as TOS values and makes all TOS values readable as string values (e.g. AF11). In addition, alembic scripts have been updated to use the proper field types for all TOS/COS values. (issue ASTERISK-23235) Reported by: George Joseph Review: https://reviewboard.asterisk.org/r/3304/ ........ Merged revisions 410028 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410029 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Richard Mudgett	b5ca213e34	res_pjsip: Updates and adds more PJSIP CLI commands. * Adds identify, transport, and registration support to the PJSIP CLI. * Creates three additional callbacks, one for an iterator, one for a comparator, and one for a container. This eliminates the link dependency from higher level modules to lower level ones. * Eliminates duplicate sorting in PJSIP CLI commands. * Cleans up PJSIP CLI output formatting. * Pushes CLI command registration down to the implementing source file. * Adds several ast_sip_destroy_sorcery functions to complement existing ast_sip_sorcery_initialize functions. The destroy functions unregister PJSIP CLI commands and PJSIP CLI formatters. Reported by: George Joseph Review: https://reviewboard.asterisk.org/r/3104/ ........ Merged revisions 407568 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@407573 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Kevin Harwell	05cbf8df9b	res_pjsip: AMI commands and events. Created the following AMI commands and corresponding events for res_pjsip: PJSIPShowEndpoints - Provides a listing of all pjsip endpoints and a few select attributes on each. Events: EndpointList - for each endpoint a few attributes. EndpointlistComplete - after all endpoints have been listed. PJSIPShowEndpoint - Provides a detail list of attributes for a specified endpoint. Events: EndpointDetail - attributes on an endpoint. AorDetail - raised for each AOR on an endpoint. AuthDetail - raised for each associated inbound and outbound auth TransportDetail - transport attributes. IdentifyDetail - attributes for the identify object associated with the endpoint. EndpointDetailComplete - last event raised after all detail events. PJSIPShowRegistrationsInbound - Provides a detail listing of all inbound registrations. Events: InboundRegistrationDetail - inbound registration attributes for each registration. InboundRegistrationDetailComplete - raised after all detail records have been listed. PJSIPShowRegistrationsOutbound - Provides a detail listing of all outbound registrations. Events: OutboundRegistrationDetail - outbound registration attributes for each registration. OutboundRegistrationDetailComplete - raised after all detail records have been listed. PJSIPShowSubscriptionsInbound - A detail listing of all inbound subscriptions and their attributes. Events: SubscriptionDetail - on each subscription detailed attributes SubscriptionDetailComplete - raised after all detail records have been listed. PJSIPShowSubscriptionsOutbound - A detail listing of all outboundbound subscriptions and their attributes. Events: SubscriptionDetail - on each subscription detailed attributes SubscriptionDetailComplete - raised after all detail records have been listed. (issue ASTERISK-22609) Reported by: Matt Jordan Review: https://reviewboard.asterisk.org/r/2959/ ........ Merged revisions 403131 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403133 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Kevin Harwell	1c45a32ee8	res_pjsip: convert configuration settings names to snake case Renamed, where appropriate, the configuration options for chan/res_pjsip to use snake case (compound words separated by an underscore). For example, faxdetect will become fax_detect, recordofffeature will become record_off_feature, etc... Review: https://reviewboard.asterisk.org/r/3002/ ........ Merged revisions 403022 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403051 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Mark Michelson	2904a198d5	Switch from using pjsip_strerror to pj_strerror. pjsip_strerror is only aware of PJSIP-specific error codes. pj_strerror() is aware of all PJProject error codes and OS-specific error codes. This specifically fixes an oft-seen error in transport configuration code where EADDRINUSE would result in "Unknown PJSIP error 120098" instead of a useful message. ........ Merged revisions 400749 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400750 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Kevin Harwell	9bad1dabcf	Add a reloadable option for sorcery type objects Some configuration objects currently won't place nice if reloaded. Specifically, in this case the pjsip transport objects. Now when registering an object in sorcery one may specify that the object is allowed to be reloaded or not. If the object is set to not reload then upon reloading of the configuration the objects of that type will not be reloaded. The initially loaded objects of that type however will remain. While the transport objects will not longer be reloaded it is still possible for a user to configure an endpoint to an invalid transport. A couple of log messages were added to help diagnose this problem if it occurs. (closes issue ASTERISK-22382) Reported by: Rusty Newton (closes issue ASTERISK-22384) Reported by: Rusty Newton Review: https://reviewboard.asterisk.org/r/2807/ ........ Merged revisions 398139 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@398140 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Mark Michelson	735b30ad71	The large GULP->PJSIP renaming effort. The general gist is to have a clear boundary between old SIP stuff and new SIP stuff by having the word "SIP" for old stuff and "PJSIP" for new stuff. Here's a brief rundown of the changes: * The word "Gulp" in dialstrings, functions, and CLI commands is now "PJSIP" * chan_gulp.c is now chan_pjsip.c * Function names in chan_gulp.c that were "gulp_" are now "chan_pjsip_" * All files that were "res_sip" are now "res_pjsip" * The "res_sip" directory is now "res_pjsip" * Files in the "res_pjsip" directory that began with "sip_" are now "pjsip_" * The configuration file is now "pjsip.conf" instead of "res_sip.conf" * The module info for all PJSIP-related files now uses "PJSIP" instead of "SIP" * CLI and AMI commands created by Asterisk's PJSIP modules now have "pjsip" as the starting word instead of "sip" git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395764 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago

21 Commits (bd867cd0787b124984caf2604478212651ea4c03)