3471 Commits (bcc566b77e7126b8316e9679872d0dc3ff9a446c)

Author	SHA1	Message	Date
Joshua Colp	eac818801b	bridge_native_rtp: Handle case where channel joins already suspended. ... The bridge_native_rtp module did not properly handle the case where a smart bridge operation occurs while a channel is suspended. In this scenario the module would incorrectly set up local or remote RTP bridging despite the media having to flow through Asterisk. The remote endpoint would see two media streams and experience wonky audio. The module has been changed so that it ensures both channels are not suspended when performing the native RTP bridging and this requirement has been documented in the bridge technology. ASTERISK-26781 Change-Id: Id4022d73ace837d4a293106445e3ade10dbc7c7c	8 years ago
zuul	a3584c6834	Merge "res_pjsip: Record the serializer earlier on the tdata." into 13	8 years ago
Sean Bright	5eb7875243	realtime: Centralize some common realtime backend code ... All of the realtime backends create artificial ast_categorys to pass back into the core as query results. These categories have no filename or line number information associated with them and the backends differ slightly on how they create them. So create a couple helper macros to help make things more consistent. Also updated the call sites to remove redundant error messages about memory allocation failure. Note that res_config_ldap sets the category filename to the 'table name' but that is not read by anything in the core, so I've dropped it. Change-Id: I3a1fd91e0c807dea1ce3b643b0a6fe5be9002897	8 years ago
Richard Mudgett	eb9ae4f7cb	res_pjsip: Record the serializer earlier on the tdata. ... When PJPROJECT needs to do a DNS resolution and there is not a cached entry available, the SIP request message goes out on the PJSIP monitor thread instead of the original serializer thread. Thus when the response comes back it does not get processed by the original sending serializer. This patch records the serializer on tdata before passing a request message to PJPROJECT where it can in Asterisk code. There are several places in PJPROJECT for outbound registration and publishing support that would need to record the serializer. Unfortunately, without replacing the PJPROJECT DNS resolver as was done in v14 we cannot fix those without modifying PJPROJECT. Even if we backported the DNS resolver from v14, the outbound registration refresh timer does not go out on a serializer thread but the PJSIP monitor thread. Fortunately, Asterisk's outbound publish support doesn't use the auto refresh timer that would also not go out under the serializer thread. This patch is v13 only. ASTERISK-26669 ASTERISK-26738 Change-Id: I9997b9ed6dbcebd2c37d6a67dc6dcee9c78914a4	8 years ago
George Joseph	be77b845d9	res_pjsip_pubsub: Correctly implement persisted subscriptions ... This patch fixes 2 original issues and more that those 2 exposed. * When we send a NOTIFY, and the client either doesn't respond or responds with a non OK, pjproject only calls our pubsub_on_evsub_state callback, no others. Since pubsub_on_evsub_state (which does the sub_tree cleanup) does not expect to be called back without the other callbacks being called first, it just returns leaving the sub_tree orphaned. Now pubsub_on_evsub_state checks the event for PJSIP_EVENT_TSX_STATE which is what pjproject will set to tell us that it was the transaction that timed out or failed and not the subscription itself timing our or being terminated by the client. If is TSX_STATE, pubsub_on_evsub_state now does the proper cleanup regardless of the state of the subscription. * When a client renews a subscription, we don't update the persisted subscription with the new expires timestamp. This causes subscription_persistence_recreate to prune the subscription if/when asterisk restarts. Now, pubsub_on_rx_refresh calls subscription_persistence_update to apply the new expires timestamp. This exposed other issues however... * When creating a dialog from rdata (which sub_persistence_recreate does from the packet buffer) there must NOT be a tag on the To header (which there will be when a client refreshes a subscription). If there is one, pjsip_dlg_create_uas will fail. To address this, subscription_persistence_update now accepts a flag that indicates that the original packet buffer must not be updated. New subscribes don't set the flag and renews do. This makes sure that when the rdata is recreated on asterisk startup, it's done from the original subscribe packet which won't have the tag on To. * When creating a dialog from rdata, we were setting the dialog's remote (SUBSCRIBE) cseq to be the same as the local (NOTIFY) cseq. When the client tried to resubscribe after a restart with the correct cseq, we'd reject the request with an Invalid CSeq error. * The acts of creating a dialog and evsub by themselves when recreating a subscription does NOT restart pjproject's subscription timer. The result was that even if we did correctly recreate the subscription, we never removed it if the client happened to go away or send a non-OK response to a NOTIFY. However, there is no pjproject function exposed to just set the timer on an evsub that wasn't created by an incoming subscribe request. To address this, we create our own timer using ast_sip_schedule_task. This timer is used only for re-establishing subscriptions after a restart. An earlier approach was to add support for setting pjproject's timer (via a pjproject patch) and while that patch is still included here, we don't use that call at the moment. While addressing these issues, additional debugging was added and some existing messages made more useful. A few formatting changes were also made to 'pjsip show scheduled tasks' to make displaying the subscription timers a little more friendly. ASTERISK-26696 ASTERISK-26756 Change-Id: I8c605fc1e3923f466a74db087d5ab6f90abce68e	8 years ago
Sean Bright	8936568515	manager: Restore Originate failure behavior from Asterisk 11 ... In Asterisk 11, if the 'Originate' AMI command failed to connect the provided Channel while in extension mode, a 'failed' extension would be looked up and run. This was, I believe, unintentionally removed in 51b6c49. This patch restores that behavior. This also adds an enum for the various 'synchronous' modes in an attempt to make them meaningful. ASTERISK-26115 #close Reported by: Nasir Iqbal Change-Id: I8afbd06725e99610e02adb529137d4800c05345d	8 years ago
Richard Mudgett	a199f94908	res_agi: Prevent an AGI from eating frames it should not. (Re-do) ... A dialplan intercept routine is equivalent to an interrupt routine. As such, the routine must be done quickly and you do not have access to the media stream. These restrictions are necessary because the media stream is the responsibility of some other code and interfering with or delaying that processing is bad. A possible future dialplan processing architecture change may allow the interception routine to run in a different thread from the main thread handling the media and remove the execution time restriction. * Made res_agi.c:run_agi() running an AGI in an interception routine run in DeadAGI mode. No touchy channel frames. ASTERISK-25951 ASTERISK-26343 ASTERISK-26716 Change-Id: I638f147ca7a7f2590d7194a8ef4090eb191e4e43	8 years ago
Richard Mudgett	6bed318a66	Frame deferral: Revert API refactoring. ... There are several issues with deferring frames that are caused by the refactoring. 1) The code deferring frames mishandles adding a deferred frame to the deferred queue. As a result the deferred queue can only be one frame long. 2) Deferrable frames can come directly from the channel driver as well as the read queue. These frames need to be added to the deferred queue. 3) Whoever is deferring frames is really only doing the __ast_read() to collect deferred frames and doesn't care about the returned frames except to detect a hangup event. When frame deferral is completed we must make the normal frame processing see the hangup as a frame anyway. As such, there is no need to have varying hangup frame deferral methods. We also need to be aware of the AST_SOFTHANGUP_ASYNCGOTO hangup that isn't real. That fake hangup is to cause the PBX thread to break out of loops to go execute a new dialplan location. 4) To properly deal with deferrable frames from the channel driver as pointed out by (2) above, means that it is possible to process a dialplan interception routine while frames are deferred because of the AST_CONTROL_READ_ACTION control frame. Deferring frames is not implemented as a re-entrant operation so you could have the unsupported case of two sections of code thinking they have control of the media stream. A worse problem is because of the bad implementation of the AMI PlayDTMF action. It can cause two threads to be deferring frames on the same channel at the same time. (ASTERISK_25940) * Rather than fix all these problems simply revert the API refactoring as there is going to be only autoservice and safe_sleep deferring frames anyway. ASTERISK-26343 ASTERISK-26716 #close Change-Id: I45069c779aa3a35b6c863f65245a6df2c7865496	8 years ago
George Joseph	cb504ad6ae	Merge "ari: Implement 'debug all' and request/response logging" into 13	8 years ago
George Joseph	b39c04fc02	Merge "PJPROJECT logging: Fix detection of max supported log level." into 13	8 years ago
Richard Mudgett	1484a991e1	Add notes about embedded ast_frame structs holding a format ref. ... mod_format.h: Note ast_filestream.fr holds a format ref. translate.h: Note ast_trans_pvt.f holds a format ref. Change-Id: I86bda354d725207b41e08920355d7c31b2d7f749	9 years ago
George Joseph	17f4989d49	ari: Implement 'debug all' and request/response logging ... The 'ari set debug' command has been enhanced to accept 'all' as an application name. This allows dumping of all apps even if an app hasn't registered yet. To accomplish this, a new global_debug global variable was added to res/stasis/app.c and new APIs were added to set and query the value. 'ari set debug' now displays requests and responses as well as events. This required refactoring the existing debug code. * The implementation for 'ari set debug' was moved from stasis/cli.{c,h} to ari/cli.{c,h}, and stasis/cli.{c,h} were deleted. * In order to print the body of incoming requests even if a request failed, the consumption of the body was moved from the ari stubs to ast_ari_callback in res_ari.c and the moustache templates were then regenerated. The body is now passed to ast_ari_invoke and then on to the handlers. This results in code savings since that template was inserted multiple times into all the stubs. An additional change was made to the ao2_str_container implementation to add partial key searching and a sort function. The existing cli code assumed it was already there when it wasn't so the tab completion was never working. Change-Id: Ief936f747ce47f1fb14035fbe61152cf766406bf	9 years ago
Richard Mudgett	30cb4eb57f	PJPROJECT logging: Fix detection of max supported log level. ... The mechanism used for detecting the maximum log level compiled into the linked pjproject did not work. The API call simply stores the requested level into an integer and does no range checking. Asterisk was assuming that there was range checking and limited the new value to the allowable range. To get the actual maximum log level compiled into the linked pjproject we need to get and save off the initial set log level from pjproject. This is the maximum log level supported. * Get and save off the initial log level setting before altering it to the desired level on startup. This has to be done by a macro rather than calling a core function to avoid incorrectly linking pjproject. * Split the initial log level warning messages to warn if the linked pjproject cannot support the requested startup level and if it is too low to get the pjproject buildopts for "pjproject show buildopts". * Adjust the CLI "pjproject set log level" to check the saved max log level and to generate normal output messages instead of a warning message. ASTERISK-26743 #close Change-Id: I40aa76653e2a1dece66c3f8734594b4f0471cfb4	9 years ago
Kevin Harwell	883e7fde31	abstract/fixed/adpative jitter buffer: disallow frame re-inserts ... It was possible for a frame to be re-inserted into a jitter buffer after it had been removed from it. A case when this happened was if a frame was read out of the jitterbuffer, passed to the translation core, and then multiple frames were returned from said translation core. Upon multiple frames being returned the first is passed on, but sebsequently "chained" frames are put back into the read queue. Thus it was possible for a frame to go back into the jitter buffer where this would cause problems. This patch adds a flag to frames that are inserted into the channel's read queue after translation. The abstract jitter buffer code then checks for this flag and ignores any frames marked as such. Change-Id: I276c44edc9dcff61e606242f71274265c7779587	9 years ago
Aaron An	0047b1bc49	res_rtp_asterisk: Fix bug in function CHANNEL(rtcp, all_rtt) ... Function CHANNEL(rtcp,all_rtt) CHANNEL(rtcp,all_loss) CHANNEL(rtcp,all_jitter) always return 0.0 due to wrong define of macro "AST_RTP_SATA_SET" and "AST_RTP_STAT_STRCPY". It should compare "combined" with "stat" not "current_stat". ASTERISK-26710 #close Reported-by: Aaron An Tested-by: AaronAn Change-Id: Id4140fafbf92e2db689dac5b17d9caa009028a15	9 years ago
Richard Mudgett	75a6afbec5	MESSAGE: Flush Message/ast_msg_queue channel alert pipe. ... ASTERISK-25083 Change-Id: Id54baa57a8dbca84e29f28bcd2ffc0a5ac12d8b2	9 years ago
George Joseph	ebc67d3053	res_pjsip_registrar: AMI Add RegistrationInboundContactStatuses command ... The PJSIPShowRegistrationsInbound AMI command was just dumping out all AORs which was pretty useless and resource heavy since it had to get all endpoints, then all aors for each endpoint, then all contacts for each aor. PJSIPShowRegistrationInboundContactStatuses sends ContactStatusDetail events which meets the intended purpose of the other command and has significantly less overhead. Also, some additional fields that were added to Contact since the original creation of the ContactStatusDetail event have been added to the end of the event. For compatibility purposes, PJSIPShowRegistrationsInbound is left intact. ASTERISK-26644 #close Change-Id: I326f12c9ecb52bf37ba03f0748749de4da01490a	9 years ago
Joshua Colp	8d56016ae4	Merge "tcptls: Use new certificate upon sip reload" into 13	9 years ago
Joshua Colp	28b76ed667	Merge "PJPROJECT logging: Made easier to get available logging levels." into 13	9 years ago
Guido Falsi	2ceb609edb	res_rtp: Fix regression when IPv6 is not available. ... The latest Release candidate fails to create RTP streams when IPv6 is not available. Due to the changes made in September the ast_sockaddr structure passed around to create these streams is always of AF_INET6 type, causing failure when used for IPv4. This patch adds a utility function to check for availability of IPv6 and applies such check at startup to determine how to create the ast_sockaddr structures. ASTERISK-26617 #close Change-Id: I627a4e91795e821111e1cda523f083a40d0e0c3e	9 years ago
Richard Mudgett	44fe4a5769	PJPROJECT logging: Made easier to get available logging levels. ... Use of the new logging is as simple as issuing the new CLI command or setting the new pjproject.conf option. Other options that can affect the logging are how you have the pjproject log levels mapped to Asterisk log types in pjproject.conf and if you have configured Asterisk to log the DEBUG type messages. Altering the pjproject.conf level mapping shouldn't be necessary for most installations as the default mapping is sensible. Configuring Asterisk to log the DEBUG message type is standard practice for collecting debug information. * Added CLI "pjproject set log level" command to dynamically adjust the maximum pjproject log message level. * Added CLI "pjproject show log level" command to see the currently set maximum pjproject log message level. * Added pjproject.conf startup section "log_level" option to set the initial maximum pjproject log message level so all messages could be captured from initialization. * Set PJ_LOG_MAX_LEVEL to 6 to compile in all defined logging levels into bundled pjproject. Pjproject will use the currently set run time log level to determine if a log message is generated just like Asterisk verbose and debug logging levels. * In log_forwarder(), made always log enabled and mapped pjproject log messages. DEBUG mapped log messages are no longer gated by the current Asterisk debug logging level. * Removed RAII_VAR() from res_pjproject.c:get_log_level(). ASTERISK-26630 #close Change-Id: I6dca12979f482ffb0450aaf58db0fe0f6d2e5389	9 years ago
zuul	eec82c6221	Merge "chan_pjsip: fix switching sending codec when asymmetric_rtp_codec=no" into 13	9 years ago
Michael Kuron	8e77d6f520	tcptls: Use new certificate upon sip reload ... Previously, a TLS server socket would only be restarted upon sip reload if the bind address had changed. This commit adds checking for changes to TLS parameters like certificate, ciphers, etc. so they get picked up without requiring a reload of the entire chan_sip module. This does not affect open connections in any way, but new connections will use the new TLS parameters. The changes also apply to HTTP and Manager. ASTERISK-26604 #close Change-Id: I169e86cefc6dcd627c915134015a6a1ab1aadbe6	9 years ago
George Joseph	425da14927	build: Backport addition of librt check to configure.ac ... A while back, a master-only change was made to check for librt which should probably have been cherry-picked to 13 at that time. Sometime between then and now, part of that change did make it into 13 but it was incomplete and non-functional. This patch backports the rest of the librt check and allows the link of libasteriskpj to use the results. Change-Id: I1424008fd8c90f389dda53162ec4a340b253a3c1	9 years ago
Mark Michelson	bde3d022a3	manager: update minor version ... Based on bridge video AMI event changes, bump the minor version of AMI. Change-Id: I02586bd6cafc0baa33ea98c2f75356c0f5e03435	9 years ago
zuul	3135a745e3	Merge "res_pjsip_outbound_authenticator_digest.c: Fix memory pool leak." into 13	9 years ago
George Joseph	404596b790	channel: Fix issues in hangup scenarios caused by frame deferral ... ASTERISK-26343 Change-Id: I06dbf7366e26028251964143454a77d017bb61c8	9 years ago
zuul	b745c326c2	Merge "res/ari/resource_bridges: Add the ability to manipulate the video source" into 13	9 years ago
zuul	f68790d46a	Merge "Revert "Revert "Add API for channel frame deferral.""" into 13	9 years ago
Joshua Colp	4c3d25875f	Merge "Add X.509 subject alternative name support to TLS certificate verification." into 13	9 years ago
Richard Mudgett	e632222bc4	res_pjsip_outbound_authenticator_digest.c: Fix memory pool leak. ... Responding to authentication challenges leaks PJSIP memory pools. The leak was introduced with a pjproject 2.5.5 API change. https://trac.pjsip.org/repos/ticket/1929 changed the API usage of pjsip_auth_clt_init() to require the new API pjsip_auth_clt_deinit() to clean up cached authentication allocations that get allocated with pjsip_auth_clt_reinit_req(). ASTERISK-26516 #close Change-Id: I4473141b8c3961d0dc91c382beb3876b3efb45c8	9 years ago
Alexei Gradinari	cf6d13180e	chan_pjsip: fix switching sending codec when asymmetric_rtp_codec=no ... The sending codec is switched to the receiving codec and then is switched back to the best native codec on EVERY receiving RTP packets. This is because after call of ast_channel_set_rawwriteformat there is call of ast_set_write_format which calls set_format which sets rawwriteformat to the best native format. This patch adds a new function ast_set_write_format_path which set specific write path on channel and uses this function to switch the sending codec. ASTERISK-26603 #close Change-Id: I5b7d098f8b254ce8f45546e6c36e5d324737f71d	9 years ago
Maciej Szmigiero	7b96e8cc3d	Add X.509 subject alternative name support to TLS certificate ... verification. This way one X.509 certificate can be used for hosts that can be reached under multiple DNS names or for multiple hosts. Signed-off-by: Maciej Szmigiero <mail@maciej.szmigiero.name> ASTERISK-25063 #close Change-Id: I13302c80490a0b44c43f1b45376c9bd7b15a538f	9 years ago
Matt Jordan	d23b4af477	res/ari/resource_bridges: Add the ability to manipulate the video source ... In multi-party bridges, Asterisk currently supports two video modes: * Follow the talker, in which the speaker with the most energy is shown to all participants but the speaker, and the speaker sees the previous video source * Explicitly set video sources, in which all participants see a locked video source Prior to this patch, ARI had no ability to manipulate the video source. This isn't important for two-party bridges, in which Asterisk merely relays the video between the participants. However, in a multi-party bridge, it can be advantageous to allow an external application to manipulate the video source. This patch provides two new routes to accomplish this: (1) setVideoSource: POST /bridges/{bridgeId}/videoSource/{channelId} Sets a video source to an explicit channel (2) clearVideoSource: DELETE /bridges/{bridgeId}/videoSource Removes any explicit video source, and sets the video mode to talk detection ASTERISK-26595 #close Change-Id: I98e455d5bffc08ea5e8d6b84ccaf063c714e6621	9 years ago
George Joseph	2fefb6187f	Revert "Revert "Add API for channel frame deferral."" ... This reverts commit 6b5a7ced13. Change-Id: I61d1dbb2e69e1977f684b7dfc8e98211024e1cd1	9 years ago
George Joseph	5e0c224043	cli: Fix ast_el_read_char to work with libedit >= 3.1 ... Libedit 3.1 is not build with unicode on as a default and so the prototype for the el_gets callback changed from expecting a char buffer to accepting a wchar buffer. If ast_el_read_char isn't changed, the cli reads garbage from teh terminal. Added a configure test for (*el_rfunc_t)(EditLine *, wchar_t *) and updated ast_el_read_char to use the HAVE_ define to detemrine whether to use char or wchar. ASTERISK-26592 #close Change-Id: I9099b46f68e06d0202ff80e53022a2b68b08871a	9 years ago
George Joseph	07e7ac5119	Merge "Revert "Add API for channel frame deferral."" into 13	9 years ago
George Joseph	6b5a7ced13	Revert "Add API for channel frame deferral." ... This reverts commit 9231a56cf3. Multiple testsuite failures were detected after the fact. Change-Id: I3bac8d7c3ddb69a4ddf6c5d6de0ffa5ff7ff3af7	9 years ago
zuul	7477c95749	Merge "Add API for channel frame deferral." into 13	9 years ago
Joshua Colp	77e56bc2e0	Merge "stasis_recording/stored: remove calls to deprecated readdir_r function." into 13	9 years ago
Mark Michelson	9231a56cf3	Add API for channel frame deferral. ... There are several places in Asterisk that have duplicated logic for deferring important frames until later. This commit adds a couple of API calls to facilitate this automatically. ast_channel_start_defer_frames(): Future reads of deferrable frames on this channel will be deferred until later. ast_channel_stop_defer_frames(): Any frames that have been deferred get requeued onto the channel. ASTERISK-26343 Change-Id: I3e1b87bc6796f222442fa6f7d1b6a4706fb33641	9 years ago
Kevin Harwell	bd4d7d8ad0	stasis_recording/stored: remove calls to deprecated readdir_r function. ... The readdir_r function has been deprecated and should no longer be used. This patch removes the readdir_r dependency (replaced it with readdir) and also moves the directory search code to a more centralized spot (file.c) Also removed a strict dependency on the dirent structure's d_type field as it is not portable. The code now checks to see if the value is available. If so, it tries to use it, but defaults back to using the stats function if necessary. Lastly, for most implementations of readdir it *should* be thread-safe to make concurrent calls to it as long as different directory streams are specified. glibc falls into this category. However, since it is possible that there exist some implementations that are not safe, locking has been added for those other than glibc. ASTERISK-26412 ASTERISK-26509 #close Change-Id: Id8f54689b1e2873e82a09d0d0d2faf41964e80ba	9 years ago
Alexander Traud	0cf1778eed	rtp_engine: Allow more than 32 dynamic payload types. ... The dynamic range (96-127) allows 32 RTP Payload Types. RFC 3551 section 3 allows to reassign other ranges. Consequently, when the dynamic range is exhausted, you can go for "rtp_pt_dynamic = 35" (or 0) in asterisk.conf. This enables the range 35-63 (or 0-63) giving room for another 29 (or 64) payload types. ASTERISK-26311 #close Change-Id: I7bc96ab764bc30098a178b841cbf7146f9d64964 (cherry picked from commit 9ac53877f6)	9 years ago
Joshua Colp	3f3f6d091e	Merge "res/stasis: Add CLI commands for displaying/debugging ARI apps" into 13	9 years ago
Tzafrir Cohen	c1c9487375	define PATH_MAX for HURD ... PATH_MAX is not guaranteed to be defined. In parctice, all but the HURD define it to a constant. It is indeed not safe to assume there won't be longer paths and Asterisk generally does err safely on such cases. So even for HURD we'll just pretend PATH_MAX is 4096. ASTERISK-25070 #close Change-Id: I53d10ba18c34c132bcb640a5fd8e0da1d9b22db3	9 years ago
Matt Jordan	29692d4aa4	res/stasis: Add CLI commands for displaying/debugging ARI apps ... This patch adds three new CLI commands: - ari show apps: list the registered ARI applications - ari show app: show detailed information about an ARI application - ari set debug: dump events being sent to an ARI application Note that while these CLI commands live in the res_stasis module, we use the 'ari' family for these commands. This was done as most users of Asterisk aren't aware of the semantic differences between ARI and res_stasis, and some 'ari' CLI commands already exist. ASTERISK-26488 #close Change-Id: I51ad6ff0cabee0d69db06858c13f18b1c513c9f5	9 years ago
Corey Farrell	30b1bc77d2	vector: Prevent NULL argument to memcpy. ... Headers declare that memcpy does not accept NULL argument for the first two parameters. Add a conditional block to prevent memcpy and ast_free from running on vectors with NULL element array. ASTERISK-26526 #close Change-Id: I988a476bb5fcfcbd3f6d6c6b3e7769e4f9629b71	9 years ago
Corey Farrell	f373de3020	Fix shutdown crash caused by modules being left open. ... It is only safe to run ast_register_cleanup callbacks when all modules have been unloaded. Previously these callbacks were run during graceful shutdown, making it possible to crash during shutdown. ASTERISK-26513 #close Change-Id: Ibfa635bb688d1227ec54aa211d90d6bd45052e21	9 years ago
Joshua Colp	e0bc17edff	pjsip: Fix a few media bugs with reinvites and asymmetric payloads. ... When channel format changes occurred as a result of an RTP re-negotiation the bridge was not informed this had happened. As a result the bridge technology was not re-evaluated and the channel may have been in a bridge technology that was incompatible with its formats. The bridge is now unbridged and the technology re-evaluated when this occurs. The chan_pjsip module also allowed asymmetric codecs for sending and receiving. This did not work with all devices and caused one way audio problems. The default has been changed to NOT do this but to match the sending codec to the receiving codec. For users who want asymmetric codecs an option has been added, asymmetric_rtp_codec, which will return chan_pjsip to the previous behavior. The codecs returned by the chan_pjsip module when queried by the bridge_native_rtp module were also not reflective of the actual negotiated codecs. The nativeformats are now returned as they reflect the actual negotiated codecs. ASTERISK-26423 #close Change-Id: I6ec88c6e3912f52c334f1a26983ccb8f267020dc	9 years ago
Mark Michelson	eff97808fb	ARI: Detect duplicate channel IDs ... ARI and AMI allow for an explicit channel ID to be specified when originating channels. Unfortunately, there is nothing in place to prevent someone from using the same ID for multiple channels. Further complicating things, adding ID validation to channel allocation makes it impossible for ARI to discern why channel allocation failed, resulting in a vague error code being returned. The fix for this is to institute a new method for channel errors to be discerned. The method mirrors errno, in that when an error occurs, the caller can consult the channel errno value to determine what the error was. This initial iteration of the feature only introduces "unknown" and "channel ID exists" errors. However, it's possible to add more errors as needed. ARI uses this feature to determine why channel allocation failed and can return a 409 error during origination to show that a channel with the given ID already exists. ASTERISK-26421 Change-Id: Ibba7ae68842dab6df0c2e9c45559208bc89d3d06	9 years ago