asterisk

Commit Graph

Author	SHA1	Message	Date
Kevin Harwell	c602b086ed	res_pjsip_messaging: send message to a default outbound endpoint In some cases messages need to be sent to a direct URI (sip:<ip address>). This patch adds in that support by using a default outbound endpoint. When sending messages, if no endpoint can be found then the default one is used. To facilitate this a new default_outbound_endpoint option was added to the globals section for pjsip.conf. Review: https://reviewboard.asterisk.org/r/2944/ ........ Merged revisions 403680 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403687 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Mark Michelson	b18ed67d16	Switch PJSIP auth to use a vector. Since Asterisk has a vector API now, places where arrays are manually resized don't really make sense any more. Since the auth work in PJSIP was freshly-written, it was easy to reform it to use a vector. Review: https://reviewboard.asterisk.org/r/3044 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403499 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Richard Mudgett	3357c494cb	sorcery, bucket: Change observer remove calls to take const callbacks struct. * Make ast_sorcery_observer_remove() accept a const callbacks struct. * Make ast_sorcery_observer_remove() tolerant of the sorcery parameter being NULL. Now it can be called within a module unload routine if the sorcery initialization fails. * Fix ast_sorcery_observer_add() to fail if the container link fails. ........ Merged revisions 403324 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403327 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Joshua Colp	0620cc0c00	res_pjsip_transport_websocket: Fix security events and simplify implementation. Transport type determination for security events has been simplified to use the type present on the message itself instead of searching through configured transports to find the transport used. The actual WebSocket transport has also been simplified. It now leverages the existing PJSIP transport manager for finding the active WebSocket transport for outgoing messages. This removes the need for res_pjsip_transport_websocket to store a mapping itself. (closes issue ASTERISK-22897) Reported by: Max E. Reyes Vera J. Review: https://reviewboard.asterisk.org/r/3036/ ........ Merged revisions 403256 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403257 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Joshua Colp	a64cd7c6bb	res_pjsip_session: Add configurable behavior for redirects. The action taken when a redirect occurs is now configurable on a per-endpoint basis. The redirect can either be treated as a redirect to a local extension, to a URI that is dialed through the Asterisk core, or to a URI that is dialed within PJSIP itself. (closes issue ASTERISK-21710) Reported by: Matt Jordan Review: https://reviewboard.asterisk.org/r/2963/ ........ Merged revisions 403207 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403208 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Joshua Colp	9d3b590ad8	res_pjsip: Fix crash when reloading certain configurations. Certain options available that specify a SIP URI perform validation on the provided URI using the PJSIP URI parser. This operation requires that the thread executing it be registered with the PJLIB library. During reloads this was done on a thread which was NOT registered with it. This fixes the problem by creating a task which reloads the configuration on a PJSIP thread. (closes issue ASTERISK-22923) Reported by: Anthony Messina ........ Merged revisions 403179 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403180 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Joshua Colp	fd33969240	res_pjsip: Update handling of some options to work with new option names. Some options (such as call_group and pickup_group) share the same configuration handler and decide what logic to use based on the name of the option. These handlers were not updated to check for the new option names and were treating the options as invalid. This change simply updates the handlers with the proper names of the options. (closes issue ASTERISK-22922) Reported by: Anthony Messina ........ Merged revisions 403173 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403174 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Kevin Harwell	05cbf8df9b	res_pjsip: AMI commands and events. Created the following AMI commands and corresponding events for res_pjsip: PJSIPShowEndpoints - Provides a listing of all pjsip endpoints and a few select attributes on each. Events: EndpointList - for each endpoint a few attributes. EndpointlistComplete - after all endpoints have been listed. PJSIPShowEndpoint - Provides a detail list of attributes for a specified endpoint. Events: EndpointDetail - attributes on an endpoint. AorDetail - raised for each AOR on an endpoint. AuthDetail - raised for each associated inbound and outbound auth TransportDetail - transport attributes. IdentifyDetail - attributes for the identify object associated with the endpoint. EndpointDetailComplete - last event raised after all detail events. PJSIPShowRegistrationsInbound - Provides a detail listing of all inbound registrations. Events: InboundRegistrationDetail - inbound registration attributes for each registration. InboundRegistrationDetailComplete - raised after all detail records have been listed. PJSIPShowRegistrationsOutbound - Provides a detail listing of all outbound registrations. Events: OutboundRegistrationDetail - outbound registration attributes for each registration. OutboundRegistrationDetailComplete - raised after all detail records have been listed. PJSIPShowSubscriptionsInbound - A detail listing of all inbound subscriptions and their attributes. Events: SubscriptionDetail - on each subscription detailed attributes SubscriptionDetailComplete - raised after all detail records have been listed. PJSIPShowSubscriptionsOutbound - A detail listing of all outboundbound subscriptions and their attributes. Events: SubscriptionDetail - on each subscription detailed attributes SubscriptionDetailComplete - raised after all detail records have been listed. (issue ASTERISK-22609) Reported by: Matt Jordan Review: https://reviewboard.asterisk.org/r/2959/ ........ Merged revisions 403131 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403133 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Kevin Harwell	76a2b855e1	res_pjsip: convert configuration settings names to snake case some more Updated the alembic script for pjsip. Also, the dtls config parsing stuff was expecting strings with no underscores, so removed the underscores from the option name before passing it to the parser. ........ Merged revisions 403082 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403083 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Kevin Harwell	1c45a32ee8	res_pjsip: convert configuration settings names to snake case Renamed, where appropriate, the configuration options for chan/res_pjsip to use snake case (compound words separated by an underscore). For example, faxdetect will become fax_detect, recordofffeature will become record_off_feature, etc... Review: https://reviewboard.asterisk.org/r/3002/ ........ Merged revisions 403022 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403051 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Joshua Colp	1b14a78d14	res_pjsip: Add support for building against pjproject with SIP transaction group lock support. SIP transaction group lock support has been backported into our pjproject. Since the code now internally uses a group lock the code is now changed to unlock it if present. Note that the act of finding the transaction is what actually returns it locked. For further information about group locks check out the wiki page at: http://trac.pjsip.org/repos/wiki/Group_Lock (issue ASTERISK-22818) Reported by: Matt Jordan ........ Merged revisions 402864 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402865 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
David M. Lee	4c128198c8	res_pjsip: Print a helpful error message if sorcery registration fails ........ Merged revisions 402570 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402572 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Jonathan Rose	bb1568caa1	PJSIP: Add log messages when requests are received for non-existent endpoints (closes issue ASTERISK-22552) Reported by: Rusty Newton Review: https://reviewboard.asterisk.org/r/2934/ ........ Merged revisions 401938 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@401939 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Joshua Colp	113c281782	Perform validation of permanent contacts on AORs in res_pjsip. ........ Merged revisions 400833 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400834 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Joshua Colp	cbbcf1808c	Fix an assertion in res_pjsip when specifying an invalid outbound proxy. This change fixes two issues when setting an outbound proxy: 1. The outbound proxy URI was not parsed and validated during configuration. 2. If an outgoing dialog was created and the outbound proxy could not be set an assertion would occur because the usage count on the dialog was not decremented. The documentation has also been updated to specify that a full URI must be specified for the outbound proxy. (closes issue ASTERISK-22672) Reported by: Antti Yrjola ........ Merged revisions 400824 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400825 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Mark Michelson	2904a198d5	Switch from using pjsip_strerror to pj_strerror. pjsip_strerror is only aware of PJSIP-specific error codes. pj_strerror() is aware of all PJProject error codes and OS-specific error codes. This specifically fixes an oft-seen error in transport configuration code where EADDRINUSE would result in "Unknown PJSIP error 120098" instead of a useful message. ........ Merged revisions 400749 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400750 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Mark Michelson	a4d6f43962	Push CLI qualify into the threadpool. If you run Asterisk in the background and then connect to it through a separate console, the thread that runs CLI commands is not registered with PJLIB. Thus PJLIB does not like it when you attempt to send OPTIONS requests from that thread. So now we push the task into the threadpool, which we know to be registered with PJLIB. Thanks to Antti Yrjola for reporting this. ........ Merged revisions 400680 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400683 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Mark Michelson	ee21eee7e0	Cache string values of formats on ast_format_cap() to save processing. Channel snapshots have string representations of the channel's native formats. Prior to this change, the format strings were re-created on ever channel snapshot creation. Since channel native formats rarely change, this was very wasteful. Now, string representations of formats may optionally be stored on the ast_format_cap for cases where string representations may be requested frequently. When formats are altered, the string cache is marked as invalid. When strings are requested, the cache validity is checked. If the cache is valid, then the cached strings are copied. If the cache is invalid, then the string cache is rebuilt and copied, and the cache is marked as being valid again. Review: https://reviewboard.asterisk.org/r/2879 ........ Merged revisions 400356 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400363 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
David M. Lee	2de42c2a25	Multiple revisions 399887,400138,400178,400180-400181 ........ r399887 \| dlee \| 2013-09-26 10:41:47 -0500 (Thu, 26 Sep 2013) \| 1 line Minor performance bump by not allocate manager variable struct if we don't need it ........ r400138 \| dlee \| 2013-09-30 10:24:00 -0500 (Mon, 30 Sep 2013) \| 23 lines Stasis performance improvements This patch addresses several performance problems that were found in the initial performance testing of Asterisk 12. The Stasis dispatch object was allocated as an AO2 object, even though it has a very confined lifecycle. This was replaced with a straight ast_malloc(). The Stasis message router was spending an inordinate amount of time searching hash tables. In this case, most of our routers had 6 or fewer routes in them to begin with. This was replaced with an array that's searched linearly for the route. We more heavily rely on AO2 objects in Asterisk 12, and the memset() in ao2_ref() actually became noticeable on the profile. This was #ifdef'ed to only run when AO2_DEBUG was enabled. After being misled by an erroneous comment in taskprocessor.c during profiling, the wrong comment was removed. Review: https://reviewboard.asterisk.org/r/2873/ ........ r400178 \| dlee \| 2013-09-30 13:26:27 -0500 (Mon, 30 Sep 2013) \| 24 lines Taskprocessor optimization; switch Stasis to use taskprocessors This patch optimizes taskprocessor to use a semaphore for signaling, which the OS can do a better job at managing contention and waiting that we can with a mutex and condition. The taskprocessor execution was also slightly optimized to reduce the number of locks taken. The only observable difference in the taskprocessor implementation is that when the final reference to the taskprocessor goes away, it will execute all tasks to completion instead of discarding the unexecuted tasks. For systems where unnamed semaphores are not supported, a really simple semaphore implementation is provided. (Which gives identical performance as the original taskprocessor implementation). The way we ended up implementing Stasis caused the threadpool to be a burden instead of a boost to performance. This was switched to just use taskprocessors directly for subscriptions. Review: https://reviewboard.asterisk.org/r/2881/ ........ r400180 \| dlee \| 2013-09-30 13:39:34 -0500 (Mon, 30 Sep 2013) \| 28 lines Optimize how Stasis forwards are dispatched This patch optimizes how forwards are dispatched in Stasis. Originally, forwards were dispatched as subscriptions that are invoked on the publishing thread. This did not account for the vast number of forwards we would end up having in the system, and the amount of work it would take to walk though the forward subscriptions. This patch modifies Stasis so that rather than walking the tree of forwards on every dispatch, when forwards and subscriptions are changed, the subscriber list for every topic in the tree is changed. This has a couple of benefits. First, this reduces the workload of dispatching messages. It also reduces contention when dispatching to different topics that happen to forward to the same aggregation topic (as happens with all of the channel, bridge and endpoint topics). Since forwards are no longer subscriptions, the bulk of this patch is simply changing stasis_subscription objects to stasis_forward objects (which, admittedly, I should have done in the first place.) Since this required me to yet again put in a growing array, I finally abstracted that out into a set of ast_vector macros in asterisk/vector.h. Review: https://reviewboard.asterisk.org/r/2883/ ........ r400181 \| dlee \| 2013-09-30 13:48:57 -0500 (Mon, 30 Sep 2013) \| 28 lines Remove dispatch object allocation from Stasis publishing While looking for areas for performance improvement, I realized that an unused feature in Stasis was negatively impacting performance. When a message is sent to a subscriber, a dispatch object is allocated for the dispatch, containing the topic the message was published to, the subscriber the message is being sent to, and the message itself. The topic is actually unused by any subscriber in Asterisk today. And the subscriber is associated with the taskprocessor the message is being dispatched to. First, this patch removes the unused topic parameter from Stasis subscription callbacks. Second, this patch introduces the concept of taskprocessor local data, data that may be set on a taskprocessor and provided along with the data pointer when a task is pushed using the ast_taskprocessor_push_local() call. This allows the task to have both data specific to that taskprocessor, in addition to data specific to that invocation. With those two changes, the dispatch object can be removed completely, and the message is simply refcounted and sent directly to the taskprocessor. Review: https://reviewboard.asterisk.org/r/2884/ ........ Merged revisions 399887,400138,400178,400180-400181 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400186 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Kevin Harwell	103ebcf807	pjsip: race condition in registrar While handling a registration request a race condition could occur if/when two+ clients registered at the same time. This happened when one request obtained a copy of the current contacts for an AOR and another request did the same before the first request updated. Thus the second would update and overwrite the first (or vice-versa depending on which actually updated first). In the case of it being the same contact two "add" events would be raised. pjsip registration handling is now serialized to alleviate this issue. (closes issue AST-1213) Reported by: John Bigelow Review: https://reviewboard.asterisk.org/r/2860/ ........ Merged revisions 399897 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399898 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Mark Michelson	391f0003c4	Change the "external_media_address" PJSIP endpoint option to "media_address". The endpoint option does not apply to communication with external entities. Rather, the option is applied to all communications with the endpoint. The external_media_address transport configuration option may override the endpoint option if it turns out that we are going to be communicating with an external entity. Two things of note: 1) I have not updated the XML documentation. This is being taken care of by Rusty as part of his work on issue ASTERISK-22405 2) This commit is likely to cause testsuite failures since there are tests that use the external_media_address endpoint option, and they will need to be changed over. Well, I'm planning to get that updated ASAP after this commit. (closes issue ASTERISK-22528) reported by Rusty Newton ........ Merged revisions 399283 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399284 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Mark Michelson	bbf5fbbd8c	Change how realms are handled for outbound authentication. With this change, if no realm is specified in an outbound auth section, then we will simply match the realm that was present in the 401/407 challenge. (closes issue ASTERISK-22471) Reported by George Joseph (closes issue ASTERISK-22386) Reported by Rusty Newton Patches: outbound_auth_realm_v4.patch uploaded by George Joseph (License #6322) ........ Merged revisions 399059 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399082 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Richard Mudgett	83bf017db9	Fix incorrect usages of ast_realloc(). There are several locations in the code base where this is done: buf = ast_realloc(buf, new_size); This is going to leak the original buf contents if the realloc fails. Review: https://reviewboard.asterisk.org/r/2832/ ........ Merged revisions 398757 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 398758 from http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged revisions 398759 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@398760 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Kevin Harwell	9bad1dabcf	Add a reloadable option for sorcery type objects Some configuration objects currently won't place nice if reloaded. Specifically, in this case the pjsip transport objects. Now when registering an object in sorcery one may specify that the object is allowed to be reloaded or not. If the object is set to not reload then upon reloading of the configuration the objects of that type will not be reloaded. The initially loaded objects of that type however will remain. While the transport objects will not longer be reloaded it is still possible for a user to configure an endpoint to an invalid transport. A couple of log messages were added to help diagnose this problem if it occurs. (closes issue ASTERISK-22382) Reported by: Rusty Newton (closes issue ASTERISK-22384) Reported by: Rusty Newton Review: https://reviewboard.asterisk.org/r/2807/ ........ Merged revisions 398139 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@398140 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Mark Michelson	a181544299	Fix dialog matching in the SIP distributor. Dialog matching is performed in the distributor for the sole purpose of retrieving an associated serializer so the request may be serialized. This patch fixes two problems. First, incoming CANCEL requests that had no to-tag (which really should be all CANCEL requests) would not match with a dialog. An earlier bug fix to deal with early CANCEL requests would result in the CANCEL being replied to with a 481. The fix for this is to find the matching INVITE transaction and get the dialog from that transaction. Second, no SIP responses were matching dialogs. This is because we were inverting the tags that we were passing into PJSIP's dialog finding function. This logic has been corrected by setting local and remote tag variables based on whether the incoming message is a request or response. ........ Merged revisions 397854 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397855 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Matthew Jordan	de44880645	Add rtpengine configuration parameter The rtpengine configuration parameter was documented in the XML documentation, but it was not actually registered with the sorcery object. This adds the parameter with a default of "asterisk", such that res_rtp_asterisk is chosen as the default RTP implementation. (closes issue ASTERISK-22380) Reported by: Rusty Newton Tested by: Rusty Newton ........ Merged revisions 397621 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397622 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Matthew Jordan	e31bd332b8	Update config framework/sorcery with types/options without documentation There are times when a configuration option should not have documentation. 1. Some options are registered with a particular object merely as a warning to users. These options aren't even really 'deprecated' - which has its own separate API call - they are actually provided by a different configuration file. The options are merely registered so that the user gets a warning that a different configuration file provides the item. 2. Some object types - most notably some used by modules that use sorcery - are completely internal and should never be shown to the user. 3. Sorcery itself has several 'hidden' fields that should never be shown to a user. This patch updates the configuration framework and sorcery with additional API calls that allow a module to register types as internal and options as not requiring documentation. This bypasses the XML documentation checking. This patch also re-enables the strict XML documentation checking in trunk, as well as updates some documentation that was missing. Review: https://reviewboard.asterisk.org/r/2785/ (closes issue ASTERISK-22359) Reported by: Matt Jordan (closes issue ASTERISK-22112) Reported by: Rusty Newton git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397524 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Mark Michelson	5caa938be2	Localize and rename ACL configuration. This is more-or-less a reversion of previous ACL behavior so that it is more self-contained. ACL sections are now only parsed if res_pjsip_acl.so is loaded. Moreover, the configuration section is now "type=acl" instead of "type=security". The original reason for having ACLs configured in a "type=security" section was to lump ACLs and other security-related items into the same section. The problem is that ACLs really should be in their own sections and there are no other security-related options implemented anyways. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397193 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Kinsey Moore	dfa5be76d4	Expose res_pjsip threadpool options Expose initial size, automatic increment, maximum size, and idle timeout as configurable parameters for the res_pjsip thread pool. Review: https://reviewboard.asterisk.org/r/2704/ (closes issue ASTERISK-22143) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396321 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Kinsey Moore	41cd06e03f	Add CLI/AMI commands to force chan_pjsip actions For chan_pjsip, this introduces CLI/AMI remote unregistration commands, reworks CLI syntax for sending NOTIFYs, adds AMI qualification support, and adds documentation for PJSIPNotify. This also fixes two refcounting bugs in the outbound registration code. Review: https://reviewboard.asterisk.org/r/2695/ (closes issue ASTERISK-21939) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396087 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Mark Michelson	a479821c91	Found another missed "sip" -> "pjsip" CLI command. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395884 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Kinsey Moore	f6c7e6355e	Fix remnants of the pjsip renaming git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395851 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Mark Michelson	735b30ad71	The large GULP->PJSIP renaming effort. The general gist is to have a clear boundary between old SIP stuff and new SIP stuff by having the word "SIP" for old stuff and "PJSIP" for new stuff. Here's a brief rundown of the changes: * The word "Gulp" in dialstrings, functions, and CLI commands is now "PJSIP" * chan_gulp.c is now chan_pjsip.c * Function names in chan_gulp.c that were "gulp_" are now "chan_pjsip_" * All files that were "res_sip" are now "res_pjsip" * The "res_sip" directory is now "res_pjsip" * Files in the "res_pjsip" directory that began with "sip_" are now "pjsip_" * The configuration file is now "pjsip.conf" instead of "res_sip.conf" * The module info for all PJSIP-related files now uses "PJSIP" instead of "SIP" * CLI and AMI commands created by Asterisk's PJSIP modules now have "pjsip" as the starting word instead of "sip" git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395764 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago

... 7 8 9 10 11

533 Commits (badaf0e38399a30fd7409eb7f0b2f9658390a471)