11 Commits (badaf0e38399a30fd7409eb7f0b2f9658390a471)

Author	SHA1	Message	Date
Thomas Guebels	6795ded3f4	pjsip_transport_events: handle multiple addresses for a domain ... The key used for transport monitors was the remote host name for the transport and not the remote address resolved for this domain. This was problematic for domains returning multiple addresses as several transport monitors were created with the same key. Whenever a subsystem wanted to register a callback it would always end up attached to the first transport monitor with a matching key. The key used for transport monitors is now the remote address and port the transport actually connected to. Fixes: #932 (cherry picked from commit 184a30efac)	12 months ago
Thomas Guebels	db312ab0ef	pjsip_transport_events: Avoid monitor destruction ... When a transport is disconnected, several events can arrive following each other. The first event will be PJSIP_TP_STATE_DISCONNECT and it will trigger the destruction of the transport monitor object. The lookup for the transport monitor to destroy is done using the transport key, that contains the transport destination host:port. A reconnect attempt by pjsip will be triggered as soon something needs to send a packet using that transport. This can happen directly after a disconnect since ca Subsequent events can arrive later like PJSIP_TP_STATE_DESTROY and will also try to trigger the destruction of the transport monitor if not already done. Since the lookup for the transport monitor to destroy is done using the transport key, it can match newly created transports towards the same destination and destroy their monitor object. Because of this, it was sometimes not possible to monitor a transport after one or more disconnections. This fix adds an additional check on the transport pointer to ensure only a monitor for that specific transport is removed. Fixes: #923 (cherry picked from commit 008ad8098a)	12 months ago
Sean Bright	642b84c9c9	pjsip_transport_events.c: Use %zu printf specifier for size_t. ... Partially resolves #143.	2 years ago
Sean Bright	c85fc1278f	doxygen: Fix doxygen errors. ... Change-Id: Ic50e95b4fc10f74ab15416d908e8a87ee8ec2f85	3 years ago
George Joseph	120aca73ba	pjsip_transport_events: Fix possible use after free on transport ... It was possible for a module that registered for transport monitor events to pass in a pjsip_transport that had already been freed. This caused pjsip_transport_events to crash when looking up the monitor for the transport. The fix is a two pronged approach. 1. We now increment the reference count on pjsip_transports when we create monitors for them, then decrement the count when the transport is going to be destroyed. 2. There are now APIs to register and unregister monitor callbacks by "transport key" which is a string concatenation of the remote ip address and port. This way the module needing to monitor the transport doesn't have to hold on to the transport object itself to unregister. It just has to save the transport_key. * Added the pjsip_transport reference increment and decrement. * Changed the internal transport monitor container key from the transport->obj_name (which may not be unique anyway) to the transport_key. * Added a helper macro AST_SIP_MAKE_REMOTE_IPADDR_PORT_STR() that fills a buffer with the transport_key using a passed-in pjsip_transport. * Added the following functions: ast_sip_transport_monitor_register_key ast_sip_transport_monitor_register_replace_key ast_sip_transport_monitor_unregister_key and marked their non-key counterparts as deprecated. * Updated res_pjsip_pubsub and res_pjsip_outbound_register to use the new "key" monitor functions. NOTE: res_pjsip_registrar also uses the transport monitor functionality but doesn't have a persistent object other than contact to store a transport key. At this time, it continues to use the non-key monitor functions. ASTERISK-30244 Change-Id: I1a20baf2a8643c272dcf819871d6c395f148f00b (cherry picked from commit 7684c9e907)	3 years ago
Kevin Harwell	a3b2daf127	res_pjsip: allow TLS verification of wildcard cert-bearing servers ... Rightly the use of wildcards in certificates is disallowed in accordance with RFC5922. However, RFC2818 does make some allowances with regards to their use when using subject alt names with DNS name types. As such this patch creates a new setting for TLS transports called 'allow_wildcard_certs', which when it and 'verify_server' are both enabled allows DNS name types, as well as the common name that start with '*.' to match as a wildcard. For instance: *.example.com will match for: foo.example.com Partial matching is not allowed, e.g. f*.example.com, foo.*.com, etc... And the starting wildcard only matches for a single level. For instance: *.example.com will NOT match for: foo.bar.example.com The new setting is disabled by default. ASTERISK-30072 #close Change-Id: If0be3fdab2e09c2a66bb54824fca406ebaac3da4	3 years ago
Alexander Traud	463f6c83e8	res_pjsip: Fix for Doxygen. ... ASTERISK-29747 Change-Id: Ic7a1e9453f805a6264fe86c96b7d18b87b376084	4 years ago
Kevin Harwell	930a7fe910	res_pjsip_registrar: blocked threads on reliable transport shutdown take 3 ... When a contact was removed by the registrar it did not always check to see if the circumstances involved a monitored reliable transport. For instance, if the 'remove_existing' option was set to 'true' then when existing contacts were removed due to 'max_contacts' being reached, those existing contacts being removed did not unregister the transport monitor. Also, it was possible to add more than one monitor on a reliable transport for a given aor and contact. This patch makes it so all contact removals done by the registrar also remove any associated transport monitors if necessary. It also makes it so duplicate monitors cannot be added for a given transport. ASTERISK-28213 Change-Id: I94b06f9026ed177d6adfd538317c784a42c1b17a	7 years ago
Ross Beer	f65488f546	pjsip_transport_events.c: Fix crash using stale transport pointer. ... Apparently it is possible for the transport to be destroyed without triggering the transport callback logic. As a result the transport gets destroyed and we have a stale pointer in the active_transports container. * Invoke the transport monitor callback checks when the transport is destroyed in addition to when it is disconnected and shutdown. ASTERISK-27688 Change-Id: Ia9b5469fea8f2b3f2d8476fae6b748a4d23e7261	8 years ago
George Joseph	2b9aa6b5bb	res_pjsip_pubsub: Prune subs with reliable transports at startup ... In an earlier release, inbound registrations on a reliable transport were pruned on Asterisk restart since the TCP connection would have been torn down and become unusable when Asterisk stopped. This same process is now also applied to inbound subscriptions. Also fixed issues in res_pjsip_registrar where it wasn't handling the monitoring correctly when multiple registrations came in over the same transport. To accomplish this, the pjsip_transport_event feature needed to be refactored to allow multiple monitors (multiple subcriptions or registrations from the same endpoint) to exist on the same transport. Since this changed the API, any external modules that may have used the transport monitor feature (highly unlikey) will need to be changed. ASTERISK-27612 Reported by: Ross Beer Change-Id: Iee87cf4eb9b7b2b93d5739a72af52d6ca8fbbe36	8 years ago
Richard Mudgett	1dcb92bba8	res_pjsip: PJSIP Transport state monitor refactor. ... The fix for the issue is broken up into three parts. This is part one which refactors the transport state monitor code to allow more modules to be able to monitor transports. * Pull the management of PJPROJECT's transport state callback code from res_pjsip_transport_management.c into res_pjsip. Now other modules can dynamically add and remove themselves from transport monitoring without worrying about breaking PJPROJECT's callback chain. * Add the ability for other modules to get a callback whenever a specific transport is shutdown. ASTERISK-27147 Change-Id: I7d9a31371eb1487c9b7050cf82a9af5180a57912	8 years ago